Serial EEPROM and Serial Flash for automotive applications
|
|
|
- Geraldine Barber
- 5 years ago
- Views:
Transcription
1 Serial EEPROM and Serial Flash for automotive applications Selection guide
2 Leading the way in serial non-volatile memories As a leader in serial EEPROM and an innovator in Serial Flash, STMicroelectronics offers a wide range of non-volatile memory solutions based upon a serial architecture, perfectly suited for parameter, data and code storage in automotive applications. Serial EEPROM for parameter storage: the best and broadest portfolio in the market A broad range of devices, providing the perfect solution for each customer application Products range from 1Kbit to 1Mbit, available in I 2 C, MICROWIRE and SPI bus Serial Flash for code and data storage: An innovative Serial Flash portfolio, offering the best of Flash technology in small, 8-pin packages Space efficient and cost effective solutions for code and data storage requiring densities up to 64Mbit Airbag Body electronics Dashboard ABS, ESP Engine management Transmission Car audio Car multimedia Navigation, telematics N 1 Serial NVM supplier to the automotive market ST was the first Serial NVM supplier to the automotive electronics industry. Since 1998, our commitment to the automotive market has provided innovative solutions with outstanding support, service and quality. Thanks to an extensive product portfolio, including bare die devices, ST is able to address all types of automotive applications including car audio and multimedia, body electronics, chassis and safety, and power train. To meet the standards of service and support demanded by the automotive industry, ST introduced a specific automotive grade in 1998.
3 Packaging options Max. value (mm) Body width Body length Total height Pitch S08N TSSOP8 S016W Wafer form Wafer diameter: 6 inches (150mm) Wafer thickness: 280µm Wafers are shipped unsawn and boxed (collective packing) Wafer Collective packing Surftape and reel Reel diameter: 7 inches (175mm) Die are packed in tape and reel with surftape, 2500 die per reel Tape and reel Detail of tape and reel
4 Automotive grade to meet excellence in quality and service ST s commitment to the automotive market is an aim to providing excellence in quality and service. ST recommends that all automotive customers use only automotive grade devices, identified as Range 3 products. This automotive grade is a guarantee of high quality and service: All products are 100% tested with High Reliability Certified Flow Specific automotive traceability is ensured from wafer launch to delivery Wafer and product safety stocks are established to ensure continuous delivery support Only ST internal diffusion and assembly/test plants are used to maximize automotive focus and control Change management is designed specifically to meet automotive requirements (timing, reliability etc.) Product by application Application MICROWIRE bus I 2 C bus SPI bus Audio 1 to 64 Kbit 16 to 64 Kbit Dashboard 1 to 16 Kbit 8 to 16 Kbit Body 1 to 16 Kbit 1 to 16 Kbit Telematics/navigation 1 to 64 Kbit 256 Kbit Car multimedia 1 to 64 Kbit Airbag 1 to 4 Kbit 8 to 64 Kbit Engine management 8 to 16 Kbit 4 to 256 Kbit ABS 2 to 4 Kbit 2 to 8 Kbit Transmission 2 to 4 Kbit 8 to 256 Kbit
5 Serial EEPROM, I 2 C bus Size Reference Description Packages -40 to 125 C -40 to 150 C Pack Bare die Bare die 2Kb M24C02-W x8, 400KHz, 5ms write time SO8, TSSOP8 4Kb M24C04-W x8, 400KHz, 5ms write time SO8, TSSOP8 8Kb M24C08-W x8, 400KHz, 5ms write time SO8, TSSOP8 16Kb M24C16-W x8, 400KHz, 5ms write time SO8, TSSOP8 32Kb M24C32-W x8, 400KHz, 5ms write time SO8, TSSOP8 64Kb M24C64-W x8, 400KHz, 5ms write time SO8, TSSOP8 2-wire interface Cost-effective product Voltage range: W = 2.5 to 5.5V Serial EEPROM, SPI bus Size Reference Description Packages -40 to 125 C -40 to 150 C Pack Bare die Bare die 1Kb M95010 x8, 5MHz, 5ms write SO8, TSSOP8 1Kb M95010-W x8, 5MHz, 5ms write SO8, TSSOP8 2Kb M95020 x8, 5MHz, 5ms write SO8, TSSOP8 2Kb M95020-W x8, 5MHz, 5ms write SO8, TSSOP8 4Kb M95040 x8, 5MHz, 5ms write SO8, TSSOP8 4Kb M95040-W x8, 5MHz, 5ms write SO8, TSSOP8 8Kb M95080 x8, 5MHz, 5ms write SO8, TSSOP8 8Kb M95080-W x8, 5MHz, 5ms write SO8, TSSOP8 16Kb M95160 x8, 5MHz, 5ms write SO8, TSSOP8 16Kb M95160-W x8, 5MHz, 5ms write SO8, TSSOP8 32Kb M95320 x8, 5MHz, 5ms write SO8 32Kb M95320-W x8, 5MHz, 5ms write SO8 64Kb M95640 x8, 5MHz, 5ms write SO8 64Kb M95640-W x8, 5MHz, 5ms write SO8 128Kb M95128 x8, 5MHz, 5ms write SO8 128Kb M95128-W x8, 5MHz, 5ms write SO8 256Kb M95256 x8, 5MHz, 5ms write SO8 256Kb M95256-W x8, 5MHz, 5ms write SO8 4-wire interface, very fast transfer and programming Block write protection Voltage range: blank = 4.5 to 5.5V, W = 2.5 to 5.5V
6 Size Reference Description Packages Serial EEPROM, MICROWIRE bus -40 to 125 C -40 to 150 C Pack Bare die Bare die 1Kb M93C46 x8/x16, 2MHz, 5ms write time S08, TSSOP8 1Kb M93C46-W x8/x16, 2MHz, 5ms write time S08, TSSOP8 1Kb M93S46 x8/x16, 2MHz, 5ms write time S08, TSSOP8 1Kb M93S46-W x8/x16, 2MHz, 5ms write time S08, TSSOP8 2Kb M93C56 x8/x16, 2MHz, 5ms write time S08, TSSOP8 2Kb M93C56-W x8/x16, 2MHz, 5ms write time S08, TSSOP8 2Kb M93S56 x8/x16, 2MHz, 5ms write time S08, TSSOP8 2Kb M93S56-W x8/x16, 2MHz, 5ms write time S08, TSSOP8 4Kb M93C66 x8/x16, 2MHz, 5ms write time S08, TSSOP8 4Kb M93C66-W x8/x16, 2MHz, 5ms write time S08, TSSOP8 4Kb M93S66 x8/x16, 2MHz, 5ms write time S08, TSSOP8 4Kb M93S66-W x8/x16, 2MHz, 5ms write time S08, TSSOP8 8Kb M93C76 x8/x16, 2MHz, 5ms write time S08, TSSOP8 8Kb M93C76-W x8/x16, 2MHz, 5ms write time S08, TSSOP8 16Kb M93C86 x8/x16, 2MHz, 5ms write time S08, TSSOP8 16Kb M93C86-W x8/x16, 2MHz, 5ms write time S08, TSSOP8 4-wire interface, fast transfer and programming Block write protection for M93S series Voltage range: blank = 4.5 to 5.5V. W = 2.5 to 5.5V Size Reference Description Packages Serial Flash, SPI bus -40 to 125 C 512Kb M25P05-A 25MHz, SPI, sector erase S08N 1Mb M25P10-A 25MHz, SPI, sector erase S08N 2Mb M25P20 25MHz, SPI, sector erase S08N 4Mb M25P40 25MHz, SPI, sector erase S08N 8Mb M25P80 25MHz, SPI, sector erase S016W 16Mb M25P16 25MHz, SPI, sector erase S016W M25P for code storage Voltage range: V = 2.7 to 3.6V Pack
7 Automotive serial EEPROM and Serial Flash part numbering scheme M W M N 3 T / W Bus type Standard EEPROM 93 = MICROWIRE 24 = I 2 C 95 = SPI Serial Flash 25 = SPI for code storage Density I 2 C C01 = 1Kbit C16 = 16Kbit 256 = 256Kbit Serial Flash P05 = 512 Kbit P10 = 1 Mbit P80 = 8 Mbit SPI 010 = 1Kbit 080 = 8Kbit 256 = 256Kbit V CC blank = 4.5 to 5.5V W = 2.5 to 5.5V V = 2.7 to 3.6V MICROWIRE x46 = 1Kbit x56 = 2Kbit x66 = 4Kbit x76 = 8Kbit x86 = 16Kbit Package DW = TSSOP8 MN = SO8 narrow mils MF = S016W Temperature range 3 = -40 to 125 C (with HRCF flow) Packing T = tape and reel blank = tube Process B = F6DP/DM 26% 0.6µm/14.7µm V = F6DP/DM 26% 0.6µm/7.7µm W = F6SP/DM 36% 0.5µm U = T7X 0.18µm Bare die part numbering scheme wafer form M W L W 2 1 / 150 Bus type Standard EEPROM 24 = I 2 C 93 = MICROWIRE 95 = SPI Density I 2 C C01 = 1Kbit C16 = 16Kbit MICROWIRE C66 = 4Kbit SPI 010 = 1Kbit 160 = 16Kbit V CC blank = 4.5 to 5.5V W = 2.5 to 5.5V Wafer form W = unsawn wafer (sawn wafer not supported) Process B = F6DP/DM 26% 0.6µm/14.7µm V = F6DP/DM 26% 0.6µm/7.7µm W = F6SP/DM 36% 0.5µm Internal use Wafer thickness 2 = 280µm Temperature range 125 = -40 to 125 C 150 = -40 to 150 C Bare die part numbering scheme tape and reel (surftape) M W T / Bus type Standard EEPROM 24 = I 2 C 93 = MICROWIRE V CC blank = 4.5 to 5.5V W = 2.5 to 5.5V 95 = SPI Temperature Density 125 = -40 to 125 C I 2 C SPI 150 = -40 to 150 C MICROWIRE C66 = 4Kbit C01 = 1Kbit 010 = 1Kbit C16 = 16Kbit 160 = 16Kbit Process K = F6SP/SM 20% - 0.6µm L = F6SP/SM 26% - 0.6µm S = F6DP/SM 20% - 0.6µm Tape and reel surftape L W = F6SP/DM 36% - 0.5µm B = F6DP/DM 26% - 0.6µm
8 STMicroelectronics - August Printed in Italy - All rights reserved The STMicroelectronics corporate logo is a registered trademark of the STMicroelectronics group of companies. All other names are the property of their respective owners. For selected STMicroelectronics sales offices fax: France ; Germany ; Italy ; Japan ; Singapore ; Sweden ; Switzerland ; United Kingdom and Eire ; USA Full product information at ORDER CODE: SGSERAUT/0504 Recycled and chlorine free paper
Serial EEPROM, Serial Flash and Application Specific Serial Non-Volatile Memories
Serial EEPROM, Serial Flash and Application Specific Serial NonVolatile Memories www.st.com/eeprom www.st.com/serialflash Selection Guide STMicroelectronics More Intelligent Solutions Serial EEPROM, Serial
AN626 Application note
Application note Serial EEPROM product numbering This application note provides a detailed description of the part numbering scheme of Serial EEPROM products. The part numbering scheme consists of a maximum
Serial Flash for code storage SPI bus
Serial Flash for code storage SPI bus Cross reference guide www.st.com/serialflash How to use this cross reference guide This cross reference guide is intended to help you choose the product most compatible
OTP and UV EPROM Products
and UV Products eprom.st.com STMicroelectronics More Intelligent Solutions and UV Products and UV and UVProducts LONG-TERM COMMITMENT STMicroelectronics supports the market with a strong commitment and
Serial EEPROM for Automotive New Advanced series
Serial EEPROM for Automotive New Advanced series More parameters, quicker, safer http://www.st.com/automotiveeeprom Good reasons to use EEPROM in cars 2 Applications in cars become Smarter, Customized
Microchip Serial EEPROMs
Questions: Microchip Serial EEPROMs Serial EEPROM advantages? Which EEPROM bus is best? Package options? Design tools? Pin limited? 2008 Microchip Technology Incorporated. All Rights Reserved. EEPROM Overview
AN1839 APPLICATION NOTE How to Use a Small Page ST NAND Flash Memory in an Application Designed for a Toshiba Device
AN1839 APPLICATION NOTE How to Use a Small Page ST NAND Flash Memory in an Application Designed for a Toshiba Device This Application Note describes how to use an STMicroelectronics Small Page (528 Byte/
Serial EEPROMs. Cross Reference Guide AKM HITACHI SEIKO ROHM. to ST. STMicroelectronics More Intelligent Solutions
Serial EEPROMs www.st.com/eeprom Cross Reference Guide AKM HITACHI SEIKO ROHM to ST STMicroelectronics More Intelligent Solutions How to use the Cross Reference Guide This Cross Reference Guide is intended
M25PXX 512 Kbit to 32 Mbit, Low Voltage, Serial Flash Memory With 40 MHz or 50 MHz SPI Bus Interface
512 Kbit to 32 Mbit, Low Voltage, erial Flash Memory ith 40 MHz or 50 MHz PI Bus Interface ATA BRIEF FEATURE UMMARY 512Kbit to 32Mbit of Flash Memory Page Program (up to 256 Bytes) in 1.4ms (typical) ector
STA bit single chip baseband controller for GPS and telematic applications. Features
32-bit single chip baseband controller for GPS and telematic applications Data Brief Features Suitable for automotive applications ARM7TDMI 16/32 bit RISC CPU based host microcontroller. Complete embedded
Obsolete Product(s) - Obsolete Product(s)
8 line low capacitance EMI filter and ESD protection Main product characteristics Where EMI filtering in ESD sensitive equipment is required: LCD and camera for mobile phones Computers and printers Communication
ST33F1M. Smartcard MCU with 32-bit ARM SecurCore SC300 CPU and 1.25 Mbytes high-density Flash memory. Features. Hardware features.
Smartcard MCU with 32-bit ARM SecurCore SC300 CPU and 1.25 Mbytes high-density Flash memory Data brief Features ST33F1M major applications include: Mobile communications (GSM, 3G and CDMA) Java Card applications
EMIF01-SMIC01F2 IPAD. Single line EMI filter including ESD protection. Main application. Description. Benefits. Pin configuration (Bump side view)
IPAD Single line EMI filter including ESD protection Main application Single ended microphone in mobile phones and portable devices Description The is a highly integrated device designed to suppress EMI/RFI
EMIF02-MIC01F2 2-line IPAD, EMI filter including ESD protection Features Application Description Complies with the standards:
2-line IPAD, EMI filter including ESD protection Features 2-line symetrical low-pass filter Lead-free package High-density capacitor High-efficiency EMI filtering Very small PCB footprint: 1.42 mm x 1.92
M4T28-BR12SH M4T32-BR12SH
M4T28-BR12SH M4T32-BR12SH TIMEKEEPER SNAPHAT (Battery & Crystal) FEATURES SUMMARY PROVIDES BATTERY BACKUP POWER FOR NON-VOLATILE TIMEKEEPERs and CONTROLLERS IN THE SNAPHAT SOIC PACKAGE REMOVABLE BATTERY
EMIF03-SIM06F3. 3-line IPAD, EMI filter including ESD protection. Description. Features. Application. Complies with the following standards:
3-line IPAD, EMI filter including ESD protection Description Datasheet production data The EMIF03-SIM06F3 chip is a highly integrated audio filter device designed to suppress EMI/RFI noise in all systems
Non-volatile RAMs. Selection guide. September
Non-volatile RAMs Selection guide September 2007 www.st.com/nvram ZEROPOWER NVRAMs Battery backed SRAM 16 Mbit to 16 Kbit Density 16 Mb (2 Mx8) M48Z2M1Y 5.0 M48Z2M1V 3.3 4 Mb (512 Kx8) M48Z512AY 5.0 32
M93Cx6-A125. Automotive 16-Kbit, 8-Kbit, 4-Kbit, 2-Kbit and 1-Kbit (8-bit or 16-bit wide) MICROWIRE serial EEPROM. Features
Automotive 16-Kbit, 8-Kbit, 4-Kbit, 2-Kbit and 1-Kbit (8-bit or 16-bit wide) MICROWIRE serial EEPROM Features Datasheet - production data SO8 (MN) 150 mil width TSSOP8 (DW) 169 mil width WFDFPN8 (MF) 2
EMIF02-SPK02F2. 2-line IPAD, EMI filter and ESD protection. Features. Application. Description. Complies with the following standards
2-line IPAD, EMI filter and ESD protection Datasheet production data Features Packaged in lead-free Flip Chip Very low resistance: 0.35 Ω High attenuation: -45 db at 900 MHz Very low PCB space consumption:
STTS V memory module temperature sensor. Features
2.3 V memory module temperature sensor Data brief Features is a 2.3 V memory module temperature sensor forward compatible with JEDEC standard TS3000 and backward compatible with STTS424 Operating temperature
ST33TPM12SPI. Trusted Platform Module with SPI based on 32-bit ARM SecurCore SC300 CPU. Features. TPM features. Security features.
Trusted Platform Module with SPI based on 32-bit ARM SecurCore SC300 CPU Data brief Features TPM features Single-chip Trusted Platform Module (TPM) Compliant with Trusted Computing Group (TCG) Trusted
ECMF02-3F3. Common mode filter with ESD protection. Features. Description. Applications. Complies with the following standard:
Common mode filter with ESD protection Datasheet production data Figure 1. Pin configuration (bump side) 1 2 A B Flip Chip 6 bumps C Features Figure 2. Schematic (bump side) Very large differential bandwidth
ST21NFCB. Near field communication controller. Features. RF communications. Hardware features. Communication interfaces. Electrical characteristics
Near field communication controller Data brief Features NFC operating modes supported: Card emulation Reader / Writer Peer-to-peer communication Hardware features FBGA WFBGA 64-pin 36 Kbytes of EEPROM
24AA16/24LC16B. 16K I 2 C Serial EEPROM. Device Selection Table. Description: Features: Package Types. Block Diagram. Temp. Ranges.
6K I C Serial EEPROM Device Selection Table Part Number Features: Vcc Range Max. Clock Frequency Temp. Ranges A6.7-. 00 khz () I LC6B.-. 00 khz I, E Note : 00 khz for
STLC2500D. Bluetooth V2.1 "Lisbon" + EDR. Features. Description
Bluetooth V2.1 "Lisbon" + EDR Data Brief Features Based on Ericsson Technology Licensing Baseband Core (EBC) Bluetooth specification compliance: V2.1 ( Lisbon ) + EDR HW support for packet types ACL, SCO,
SOT23-6L ESDALCL6-2SC6
Very low capacitance and low leakage current ESD protection Features 2 data-line protection Datasheet production data Protects V BUS Very low capacitance: 2.5 pf typ. Very low leakage current: 10 na at
EMIF M8. 4-line IPAD low capacitance EMI filter and ESD protection in micro QFN package. Features. Applications. Description
4-line IPAD low capacitance EMI filter and ESD protection in micro QFN package Features EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering: -34 db at frequencies from 900 MHz to 1.8
STM3220G-SK/KEI. Keil starter kit for STM32F2 series microcontrollers (STM32F207IG MCU) Features. Description
Keil starter kit for STM32F2 series microcontrollers (STM32F207IG MCU) Data brief Features The Keil MDK-Lite development tools: µvision 4 IDE/Debugger for application programming and debugging ARM C/C++
Flash Memory Overview
GigaDevice Semiconductor, Inc. Flash Memory Overview NOR and NAND Flash Memory are the critical Non-Volatile Memory devices that store a digital device s configuration data. GigaDevice has a large Flash
AN1432 APPLICATION NOTE
AN1432 APPLICATION NOTE Write Protection and Code Storage on the M25Pxx Serial Flash Memory Family Protection is one of the key features of a code storage memory. After all, the corruption of a single
ST33F1M, ST33F1M0, ST33F896, ST33F768, ST33F640, ST33F512
ST33F1M, ST33F1M0, ST33F896, ST33F768, ST33F640, ST33F512 Secure MCU with 32-bit ARM SC300 CPU, SWP interface, NESCRYPT cryptoprocessor and high-density Flash memory Data brief Micromodule DFN8 package
Microprocessor resets and supervisor ICs
Microprocessor resets and supervisor ICs Selection guide Microprocessor resets and supervisors Microprocessor supervisors with switchover December 2005 www.st.com/supervisor www.st.com/reset www.st.com/rtc
Obsolete Product(s) - Obsolete Product(s)
2-line IPAD, EMI filter and ESD protection for speaker Figure 1. Pin configuration (top view) and basic cell configuration Input SPK R in GND SPK L in 1 Pin 1 Micro QFN 6 leads 1.45 mm x 1.00 mm (bottom
AN3250 Application note
Application note M24LR64-R Multi-bank reference design description and settings 1 Introduction The M24LR64-R multi-bank reference design has been created to help users increase the memory density of their
AN2672 Application note
Application note I²C application examples Introduction The I 2 C peripheral is very flexible, supporting standard interrupts in both 10-bit and 7-bit addressing modes. As a result, generated events are
EMIF M6. 2 line IPAD, EMI filter and ESD protection in Micro QFN package. Features. Applications. Description. Complies with following standards
2 line IPAD, EMI filter and ESD protection in Micro QFN package Features Dual line EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering Very low PCB space consumption: 1.0 mm x 1.45 mm
93AA46A/B/C, 93LC46A/B/C, 93C46A/B/C
9AA6A/B/C, 9LC6A/B/C, 9C6A/B/C K Microwire Compatible Serial EEPROM Device Selection Table Part Number CC Range ORG Pin Word Size Temp Ranges Packages 9AA6A.8-. No 8-bit I P, SN, ST, MS, OT, MC 9AA6B.8--
HSP line ESD protection for high speed lines. Applications. Description. Features. µqfn 4 leads. Benefits. Complies with following standards
2-line ESD protection for high speed lines Datasheet - production data Benefits High ESD robustness of the equipment Suitable for high density boards Complies with following standards MIL-STD 883G Method
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
9AA6A/B/C, 9LC6A/B/C, 9C6A/B/C K Microwire Compatible Serial EEPROM Device Selection Table Part Number CC Range ORG Pin Word Size Temp Ranges Packages 9AA6A.8-. No 8-bit I P, SN, ST, MS, OT, MC 9AA6B.8--
M24C64 M24C32. 64/32 Kbit Serial I²C Bus EEPROM
M24C64 M24C32 64/32 Kbit Serial I²C Bus EEPROM Two Wire I 2 C Serial Interface Supports 400 khz Protocol Single Supply Voltage: 4.5V to 5.5V for M24Cxx 2.5V to 5.5V for M24Cxx-W.8V to 3.6V for M24Cxx-S
STEVAL-PCC010V1. ST802RT1A Ethernet PHY demonstration board with STM32F107 controller add-on board. Features. Description
ST802RT1A Ethernet PHY demonstration board with STM32F107 controller add-on board Data brief Features ST802RT1A Ethernet PHY demonstration board: ST802RT1A fast Ethernet physical layer transceiver On-board
ST33TPM12LPC. Trusted Platform Module with LPC interface based on 32-bit ARM SecurCore SC300 CPU. Features. TPM features.
Trusted Platform Module with LPC interface based on 32-bit ARM SecurCore SC300 CPU Features Data brief TPM features Single-chip Trusted Platform Module (TPM) Compliant with Trusted Computing Group (TCG)
Chip Card & Security ICs SLE Intelligent 256-Byte EEPROM with Write Protection function and Programmable Security Code
Chip Card & Security ICs SLE 5542 Intelligent 256-Byte EEPROM with Write Protection function and Programmable Security Code Short Product Information May 2006 Short Product Information Revision History:
USB6B1 DATA LINES PROTECTION. Application Specific Discretes A.S.D.
Application Specific Discretes A.S.D. DATA LINES PROTECTION APPLICATIONS Where transient overvoltage protection in sensitive equipment is required, such as: - Universal Serial Bus ports - RS-423 interfaces
Maximum Clamping Voltage 8x20μs I/O to pin 2. Typical TLP Clamping Voltage (Note 1) I/O to GND I/O to I/O V RWM V I PP V I PP
CPZ41X-CMKTVS5-4 4-Line Uni-Directional TVS/Diode Array Die 5.0 Volt The CPZ41X-CMKTVS5-4 is a silicon, low capacitance uni-directional transient voltage suppressor/diode array designed to protect four
EMIF03-SIM02M8. 3 line IPAD, EMI filter for SIM card applications. Features. Applications. Description. Complies with following standards
3 line IPAD, EMI filter for SIM card applications Features SIM card EMI low-pass filter High efficiency in EMI filtering Very low PCB space consumption: 1.7 mm x 1.5 mm Very thin package: 0.6 mm max High
SMP75. Trisil for telecom equipment protection. Features. Description. Applications. Benefits
Trisil for telecom equipment protection Features bidirectional crowbar protection voltage: 8 V low leakage current: I R = 2 µa max holding current: I H = 15 ma min repetitive peak pulse current: I PP =
ST19NP18-TPM-I2C Trusted Platform Module (TPM) with I²C Interface Features
Trusted Platform Module (TPM) with I²C Interface Data brief Features Single-chip Trusted Platform Module (TPM) Embedded TPM 1.2 firmware I²C communication interface (Slave mode) Architecture based on ST19N
EMIF M16. 8-line IPAD low capacitance EMI filter and ESD protection in micro QFN package. Features. Description.
8-line IPAD low capacitance EMI filter and ESD protection in micro QFN package Features EMI (I/O) low-pass filter High efficiency in EMI filtering: Greater than 30 db attenuation at frequencies from 900
24AA128/24LC128/24FC128
18K I C CMOS Serial EEPROM Device Selection Table Part Number Range Max. Clock Frequency Temp. Ranges Temperature ranges: - Industrial (I): -0 C to +8 C - Automotive (E): -0 C to +1 C A8 1.-.V 00 khz (1)
M24C64 M24C32. 64/32 Kbit Serial I²C Bus EEPROM
M24C64 M24C32 64/32 Kbit Serial I²C Bus EEPROM Compatible with I 2 C Extended Addressing Two Wire I 2 C Serial Interface Supports 400 khz Protocol Single Supply Voltage: 4.5V to 5.5V for M24Cxx 2.5V to
ASM330LHH. Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope. Data brief. Features. Applications. Description
Data brief Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope Features LGA-14L Typ: (2.5 x 3.0 x 0.83 mm³) AEC-Q100 qualified Extended temperature range from -40 to +105 C Embedded compensation
ST1284-xxA8. PARALLEL PORT SINGLE TERMINATION NETWORK WITH ±15kV ESD PROTECTION A.S.D. TM
A.S.D. TM ST284-xxA8 PARALLEL PORT SINGLE TERMINATION NETWORK WITH ±5kV ESD PROTETION MAIN APPLIATIONS EP/EPP Parallel Port termination on: Desktops Notebooks Workstations Servers P Peripherals Set Top
Kinetis KE1xF512 MCUs
NXP Semiconductors Document Number: KE1XF512PB Product Brief Rev. 1.1, 08/2016 Kinetis KE1xF512 MCUs Robust 5V MCUs with ADCs, FlexTimers, CAN and expanding memory integration in Kinetis E-series. Now
STICE CF/Stice_Connect AD/Stice_Connect AS/Stice_Connect
STICE CF/Stice_Connect AD/Stice_Connect AS/Stice_Connect Full-featured cost-effective emulation system for ST microcontrollers Data brief Features Emulation system Real-time emulation of STM8 MCUs (CPU
512 Kbit / 1 Mbit / 2 Mbit / 4 Mbit SPI Serial Flash SST25VF512 / SST25VF010 / SST25VF020 / SST25VF040
FEATURES: SST25VF512 / 010 / 020 / 040512Kb / 1Mb / 2Mb / 4Mb Serial Peripheral Interface (SPI) flash memory Single 2.7-3.6V Read and Write Operations Serial Interface Architecture SPI Compatible: Mode
USB6Bx USB PORT PROTECTION. Application Specific Discretes A.S.D.
Application Specific Discretes A.S.D. USB PORT PROTECTION FEATURES Fulldiodebridgewith integratedclamping protection Breakdown voltage : VBR = 6V min. Peakpulsepowerdissipation: PPP =500W(8/20µs) Verylowcapacitance,compatiblewith
ESDA6V1-4BC6 QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION ASD
ASD ESDA6V1-4BC6 QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION MAIN APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as: Computers Printers Communication
Description SPC564A-DISP. March 2014 DocID Rev 3 1/5
SPC564A-DISP: Discovery+ evaluation board Description Data brief - production data Features SPC564A70L7 32-bit 150 MHz e200z4 Power Architecture core, 2Mbyte on-chip in an LQFP176 package. Board Supply:
M34D64 64 Kbit Serial I²C Bus EEPROM With Hardware Write Control on Top Quarter of Memory
64 Kbit Serial I²C Bus EEPROM With Hardware Write Control on Top Quarter of Memory FEATURES SUMMARY Two Wire I 2 C Serial Interface Supports 400 khz Protocol Single Supply Voltage: 2.5V to 5.5V for M34D64-W
SMP30. Trisil for telecom equipment protection. Features. Applications. Description. Benefits
SMP3 Trisil for telecom equipment protection Features Bidirectional crowbar protection Voltage range from 62 V to 27 V Low capacitance from 1 pf to 2 pf typ.@ 5 V Low leakage current: I R = 2 µa max. Holding
ESDA7P60-1U1M. High power transient voltage suppressor. Description. Features. Applications. Complies with the following standards:
High power transient voltage suppressor Description Datasheet - production data The ESDA7P60-1U1M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.
Optimizing Your Memory Sub-System
Optimizing Your Memory Sub-System AKA Choosing the right memories Design with Freescale Toronto Jim Cooke Ecosystems Enablement JCooke@micron.com Les Marentette FAE Manager LMarentette@tech-trek.com November
Technical Note. Migrating from Micron M25P to Micron MT25Q 128Mb. Introduction. TN-25-34: Migrating from M25P to MT25Q 128Mb.
Technical Note TN-25-34: Migrating from to MT25Q 128Mb Introduction Migrating from Micron to Micron MT25Q 128Mb Introduction The purpose of this technical note is to compare the features of Micron Flash
Technical Note. Migrating from Micron M25PE to Micron MT25Q 128Mb. Introduction. TN-25-36: Migrating from M25PE to MT25Q 128Mb.
Technical Note TN-25-36: Migrating from to MT25Q 128Mb Introduction Migrating from Micron to Micron MT25Q 128Mb Introduction The purpose of this technical note is to compare the features of Micron Flash
AN2470 Application note TS4871 low voltage audio power amplifier Evaluation board user guidelines Features Description
Application note TS4871 low voltage audio power amplifier Evaluation board user guidelines Features TS4871 low voltage audio power amplifier with active low standby mode Operating range from V CC =2.2V
EV-VNQ5E050AK VNQ5E050AK evaluation board
VNQ5E050AK evaluation board Data brief production data Features Parameter Symbol Value Unit Max supply voltage V CC 41 V Operating voltage range V CC 4.5 to 28 V Max On-State resistance R ON 50 mω Current
Kvaser PCIcanx II User's Guide
Kvaser PCIcanx II User's Guide Copyright 2001-2011 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Last updated Wednesday, 05 September 2012 We believe that the information contained herein was accurate
ST19WR08 Dual Contactless Smartcard MCU With RF UART, IART & 8 Kbytes EEPROM Features Contactless specific features
Dual Contactless Smartcard MCU With RF UART, IART & 8 Kbytes EEPROM Data Brief Features Enhanced 8-bit CPU with extended addressing modes 112 KBytes user ROM with partitioning 2 KBytes user RAM with partitioning
ESDALC20-1BF4. Low clamping, low capacitance bidirectional single line ESD protection. Description. Features. Applications
Low clamping, low capacitance bidirectional single line ESD protection Description Datasheet - production data The ESDALC20-1BF4 is a bidirectional single line TVS diode designed to protect the data line
AN2474 Application note
AN474 Application note TS4995.W fully differential audio power amplifier with selectable standby and 6db fixed gain - Evaluation board user guidelines Introduction This application note describes the DEMO
STM32-MP3NL/DEC. STM32 audio engine MP3 decoder library. Description. Features
STM32 audio engine MP3 decoder library Data brief Features MPEG-1, 2 or 2.5 formats Layers 1, 2 and 3 Constant bit rate and variable bit rate Mono or stereo input streams PCM (Pulse Code Modulation) output
24AA01/24LC01B. 1K I 2 C Serial EEPROM. Description: Device Selection Table. Features: Package Types. Block Diagram. Part Number.
K I C Serial EEPROM Device Selection Table Part Number Features: Range Max. Clock Frequency Temp. Ranges AA0.7-. 00 khz () I LC0B.-. 00 khz I, E Note : 00 khz for
LD A very low drop adjustable positive voltage regulator. Description. Features
7 A very low drop adjustable positive voltage regulator Description Datasheet - production data Features P ² PAK Output current limit Low-dropout voltage: typically 400 mv at 7 A output current Output
Getting started with the X-NUCLEO-EEPRMA1 standard I²C and SPI EEPROM memory expansion board based on M24xx and M95xx series for STM32 Nucleo
UM80 User manual Getting started with the X-NUCLEO-EEPRMA standard I²C and SPI EEPROM memory expansion board based on Mxx and M9xx series for STM Nucleo Introduction The X-NUCLEO-EEPRMA expansion board
FM24C02A 2-Wire Serial EEPROM
FM24C02A 2-Wire Serial EEPROM Apr. 2010 FM24C02A 2-wrie Serial EEPROM Ver 1.3 1 INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS IN THE SELECTION OF SHANGHAI FUDAN MICROELECTRONICS
CYPRESS F-RAM SOLUTIONS
CYPRESS F-RAM SOLUTIONS CYPRESS F-RAM SOLUTIONS THE TRUSTED LEADER FOR INSTANT DATA CAPTURE AND PROTECTION THE INDUSTRY S BEST MISSION-CRITICAL MEMORIES Cypress is the trusted global leader for instant
M95020-A125 M95020-A145
Automotive 2-Kbit serial SPI bus EEPROMs with high-speed clock Features Datasheet - production data SO8 (MN) 150 mil width TSSOP8 (DW) 169 mil width WFDFPN8 (MF) 2 x 3 mm Compatible with the Serial Peripheral
M93C86-x M93C76-x M93C66-x M93C56-x M93C46-x
M93C86-x M93C76-x M93C66-x M93C56-x M93C46-x 16-Kbit, 8-Kbit, 4-Kbit, 2-Kbit and 1-Kbit (8-bit or 16-bit wide) MICROWIRE serial access EEPROM Features Datasheet - production data PDIP8 (BN) SO8 (MN) TSSOP8
STEVAL-SPBT4ATV3. USB dongle for the Bluetooth class 1 SPBT2632C1A.AT2 module. Features. Description
USB dongle for the Bluetooth class 1 SPBT2632C1A.AT2 module Features Based on V3.0 Bluetooth class 1 module, SPBT2632C1A.AT2 USB interface and power supply Supported reprogrammability via USB interface
b. Typical values, independent of external clock frequency and supply voltage. a. TCG website:
Trusted Platform Module (TPM) Data brief Features Single-chip Trusted Platform Module (TPM) Embedded TPM 1.2 firmware 33-MHz Low Pin Count (LPC) interface V1.1 Compliant with TCG PC client specific TPM
AN3154 Application note
Application note CAN protocol used in the STM32 bootloader Introduction This application note describes the CAN protocol used in the STM32 microcontroller bootloader. It details each supported command.
STR710-EVAL. Evaluation Board for STR71xF. Main components. Description. Features. STR710-EVAL board
Evaluation Board for STR71xF STR710-EVAL board Host to JTAG interface High speed JTAG debug port connection Main components STR710F processor running at 48 MHz EMI SRAM 4 Mbytes (2M x 16) EMI flash 4 Mbytes
PSDPRO Parallel Port Programmer for ST s Programmable System Device (PSD) Products
PSDPRO Parallel Port Programmer for ST s Programmable System Device (PSD) Products DATA BRIEFING FEATURES SUMMARY LOW COST PARALLEL PORT PROGRAMMER FOR ST'S ENTIRE PSD PRODUCT LINE PROGRAMS ALL PSD DEVICES
ESDA8P80-1U1M. High power transient voltage suppressor. Description. Features. Applications
High power transient voltage suppressor Description Datasheet - production data The ESDA8P80-1U1M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.
Is this presentation suited for you?
bus protection Is this presentation suited for you? 2 Where do you stand with bus protection? Beginner? I am not familiar with this subject. I am in the discovery phase and would like an overview and a
Optimize your system designs using Flash memory
Optimize your system designs using Flash memory Howard Cheng Sr. Segment Applications Manager Embedded Solutions Group, Micron 2012 Micron Technology, Inc. All rights reserved. Products are warranted only
4 Mbit (x16) Multi-Purpose Flash Plus SST39VF401C / SST39VF402C SST39LF401C / SST39LF402C
Features Organized as 256K x16 Single Voltage Read and Write Operations 2.7-3.6V for SST39VF401C/402C 3.0-3.6V for SST39LF401C/402C Superior Reliability Endurance: 100,000 Cycles (Typical) Greater than
MEMS functional sensor: smart 3D orientation and click detection standalone device. FC30-40 to +85 LGA-14 Tray FC30TR -40 to +85 LGA-14 Tape and reel
MEMS functional sensor: smart 3D orientation and click detection standalone device Features 3D orientation sensor: 3 orthogonal directions (6 positions) Embedded click/double-click functionality Low power
EMIF06-HMC02F2. 6-line IPAD, EMI filter including ESD protection. Description. Features. Applications. Complies with the following standards
6-line IPAD, EMI filter including ESD protection Description Datasheet - production data Features 6 lines low-pass-filter High efficiency in EMI filtering Very low PCB space consuming: < 4 mm² Lead-free
UM1572 User manual. STEVAL-IPE020V1: ST energy meter application based on the Android platform. Introduction
User manual STEVAL-IPE020V1: ST energy meter application based on the Android platform Introduction The ST energy meter application is a user friendly Android based solution based on NFC technology that
M24C16, M24C08 M24C04, M24C02, M24C01
M24C16, M24C08 M24C04, M24C02, M24C01 16/8/4/2/1 Kbit Serial I²C Bus EEPROM Two Wire I 2 C Serial Interface Supports 400 khz Protocol Single Supply Voltage: 4.5V to 5.5V for M24Cxx 2.5V to 5.5V for M24Cxx-W
AN2240 Application note
AN0 Application note Using the evaluation board for the TS7 low noise microphone preamplifier with V bias Introduction This application note describes the DEMO TS7 evaluation board, specifically designed
AN2430 Application note
Application note STR75x SystemMemory boot mode Introduction te: This application note describes the features of the SystemMemory boot mode developed for STR75x Flash microcontrollers providing all the
M24M02-A125. Automotive 2-Mbit serial I²C bus EEPROM with 1 MHz clock. Features
Automotive 2-Mbit serial I²C bus EEPROM with 1 MHz clock Features Datasheet - production data SO8 (MN) 150 mil width Compatible with all I 2 C bus modes 1 MHz 400 khz 100 khz Memory array 2 Mbit (256 Kbyte)
IoT, Wearable, Networking and Automotive Markets Driving External Memory Innovation Jim Cooke, Sr. Ecosystem Enabling Manager, Embedded Business Unit
IoT, Wearable, Networking and Automotive Markets Driving External Memory Innovation Jim Cooke, Sr. Ecosystem Enabling Manager, Embedded Business Unit JCooke@Micron.com 2016Micron Technology, Inc. All rights
RM24C64AF 64-Kbit 1.65V Minimum Non-volatile Fast Write Serial EEPROM I 2 C Bus
64-Kbit 1.65V Minimum Non-volatile Fast Write Serial EEPROM I 2 C Bus Advance Datasheet Features Memory array: 64Kbit EEPROM-compatible non-volatile serial memory Single supply voltage: 1.65V - 2.2V 2-wire
Kvaser PCIcan II User's Guide
Kvaser PCIcan II User's Guide Copyright 2001-2011 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Last updated Wednesday, 05 September 2012 We believe that the information contained herein was accurate
AN2143 Application note
AN2143 Application note Programming the ST10F27X embedded Flash using the ST10FLASHER tool Introduction This document summarizes the different steps needed to program the internal Flash memory of the ST10F27x
AN2737 Application note Basic in-application programming example using the STM8 I 2 C and SPI peripherals Introduction
Application note Basic in-application programming example using the STM8 I 2 C and SPI peripherals Introduction This application note is one of a set of application notes giving examples of how to use