FORM: 2391 DRAWING NO: CMMP025 Cessna Aircraft Company P.O Box 7704 WICHITA, KS 67277
|
|
- Myra Glenn
- 5 years ago
- Views:
Transcription
1 FORM: 2391 DRAWING NO: CMMP025 Cessna Aircraft Company P.O Box 7704 WICHITA, KS ENGINEERING DRAWING AND PART LIST SIGNATURE AUTHORIZATION Originals Electronically Signed in the VPM System ================================================================================ REVISION: CMMP025 MP_SPEC --V PKG: ================================================================================ ORIGINATOR LaShelle Brown (APPROVE 11/06/ :21:40) M&P Sharan Gopasetty (APPROVE 11/07/ :44:10) M&P_CHECK Jennifer Graham-Rateliff (APPROVE 11/10/ :29:56) M&P_GROUP Bret Vogel (APPROVE 11/10/ :31:14) CTC Brent Anderson (APPROVE 11/11/ :01:03) ME Terri Goforth (APPROVE 11/13/ :35:26) for Jason Neal QUALITY Richard Downs (APPROVE 11/11/ :58:39) SI_MANAGER Ab Dirkzwager (APPROVE 11/12/ :52:14) M&P_EFFECTIVITY Amit Tamhane (APPROVE 11/13/ :47:39) UM ROLE Bret Vogel (APPROVE AS UM 11/13/ :14:45) RELEASE_M&P LaShelle Brown (APPROVE 11/13/ :19:24)
2 CESSNA AIRCRAFT COMPANY AIRCRAFT DIVISION WICHITA, KANSAS CESSNA SPECIFICATION CMMP025 PROCUREMENT REQUIREMENTS FOR WROUGHT ALUMINUM SHEET AND PLATE Prepared By: Krish Patni Checked By: Approved By: Approved By: A. Ayala Material & Process Supervisor R.B. Held Product Engineering Manager Effectivity Date: 5 July 94 Effectivity Approval: A. Ayala Product Engineering Manufacturing Engineering Keith C. Kastner Quality and Reliability
3 Cessna Aircraft Company CAGE No Page i The information contained in this document is Cessna Aircraft Company proprietary information and is disclosed in confidence. It is the property of Cessna Aircraft Company and shall not be used, disclosed to others, or reproduced without the express written consent of Cessna Aircraft Company. If consent is given for reproduction in whole or in part, this notice, and the notice set forth on each page of this document, shall appear in any such reproduction in whole or in part. This document contains technical data subject to U.S. Export Control Laws, including the Export Administration Regulations. The export, re-export, or transfer contrary to U.S. law is strictly prohibited.
4 Cessna Aircraft Company CAGE No Page ii Revisions Specification revisions are identified with an alphanumeric identifier (Example A, A1, A2, B, B1, B2, etc.) The letter indicates the revision level. The number indicates the version. For any parts or processes, compliance to the latest revision level of the specification is required. Compliance to the latest version level is desirable, but not required. To view previous changes made to this specification, please refer to previous revisions. Date Letter Written Description V REASON: 1) Updated thickness range for 7150-T7751 plate material from to for Alcoa Davenport Works per MMPDS/MIL-HDBK-5 Meeting Agenda Item and Item in Table II. 2) Updated Alcoa Davenport Works facility address per supply chain input. 3) Added specification reference AMS4315 for 7075-T76 sheet and T7651 plate; AMS4048 for Alclad 7075-O sheet; AMS4049 for Alclad 7075-T6 sheet; AMS4316 for Alclad 7075-T76 sheet in Section 3.0, Tables I and II. 4) Added Alcoa Davenport Works to Table II for 7475-T7351 plate ( ) per M&P Report ) Added to Table II for 7050-T7651 plate ( and ) per M&P Report ) Added to Table I for the following alloys and thickness range per M&P report : 2024-T3 sheet ( and ), Alclad 2024-T3 MRS sheet ( ), 6061-T4 sheet ( ), Alclad T6 sheet ( ), 7075-T6 sheet ( ). 7) Added for Alclad 7075-O sheet ( ) to Table I per M&P report ) Added to Table II for the following alloys and thickness range per M&P report : 2024-T351 plate ( ), 6061-T651 plate ( ), 7050-T7451 plate ( ), 7075-T651 plate ( ), 7075-T7351 plate ( ). 9) Few minor editorial changes. Approvals: See Separate Signature Sheet Effectivity Date: UM Signature indicates FAA approval of the type design; this is a minor (Class II) change; and all required substantiating data has been reviewed and found to satisfy applicable 14 CFR requirements. No further approval using FAA Form / is required.
5 Cessna Aircraft Company CAGE No Page iii Table of Contents Section Title Page 1.0 SCOPE REFERENCES Cessna Specifications American Society for Testing and Materials Specifications Other Specifications MATERIAL REQUIREMENTS Ultrasonic Inspection Tensile Properties Electrical Conductivity Chemistry Polished Aluminum Sheet Process Control Documents Certification MARKING AND IDENTIFICATION QUALITY QUALIFIED PRODUCERS LIST Approval of a Producer Facility Data Requirements for Statistical Analysis Renewal of Qualifications Process Control Documents... 4 Table I Qualified Producers List for Sheet Material... 5 II Qualified Producers List for Plate Material III Qualified Producer Facility Addresses... 16
6 Cessna Aircraft Company CAGE No Page SCOPE This specification covers the procurement requirements for wrought metallic plate and sheet and is applicable when referenced on the applicable engineering document or the purchase order. The requirements of this specification supplement the Federal, Industry, or Cessna material specification (CMMPXXX) called out on the applicable engineering document or Purchase Order. Cessna Material and Process (M&P) Engineering is the final authority on the interpretation of the contents of this specification. 2.0 REFERENCES Except where a specified issue is indicated, the current issue of the following publications shall form a part of the specification to the extent indicated herein. 2.1 Cessna Specifications CSTI006 CMMP006 CMMP021 Ultrasonic Inspection Requirements and Procedures for Wrought Metal Products Polished Aluminum Sheet, Procurement and Inspection Surface Quality Characteristics of Alclad or Bare Aluminum: Flat Sheet and Coiled Sheet Aluminum Alloys, Fine Grain Quality, Sheet and Coil Form 2.2 American Society for Testing and Materials Specifications ASTM B594 ASTM B666 Standard Practice for Ultrasonic Inspection of Aluminum Alloy Wrought Products for Aerospace Applications Standard Practice for Identification Marking of Aluminum and Magnesium Products 2.3 Other Specifications AMS-STD-2154 AMS2355 Inspection Ultrasonic, Wrought Metals, Process for Quality Assurance Sampling and Testing Aluminum Alloys and Magnesium Alloys 3.0 MATERIAL CMMP008 CMMP010 CMMP017 Aluminum Alloy 2524-T3 Formplus, Bare and Alclad Sheet Oversize 7050 Aluminum Alloy Plate Aluminum Alloy 6022-T4 Sheet CMMP018 Aluminum Alloy 6013 CMMP020 CMMP023 CMMP030 Aluminum Alloy 2024-T4 Kaiser T-Form, Bare and Alclad Sheet Aluminum Alloy 2324-T39 Plate Oversize 7075 Aluminum Alloy Plate AMS-QQ-A-250/4 Aluminum Alloy 2024, Plate and Sheet
7 Cessna Aircraft Company CAGE No Page 2 AMS-QQ-A-250/5 AMS-QQ-A-250/11 AMS-QQ-A-250/12 AMS-QQ-A-250/13 AMS-QQ-A-250/24 AMS-QQ-A-250/25 AMS 4025 AMS 4026 AMS 4027 Aluminum Alloy Alclad 2024, Plate and Sheet Aluminum Alloy 6061, Plate and Sheet Aluminum Alloy 7075, Plate and Sheet Aluminum Alloy Alclad 7075, Plate and Sheet Aluminum Alloy, 7075, Plate and Sheet (Improved Exfoliation Resistance) Aluminum Alloy Alclad, 7075, Plate and Sheet (Improved Exfoliation Resistance) Aluminum Alloy, Sheet and Plate, 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-O) Annealed Aluminum Alloy, Sheet and Plate, 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4 Sheet, -T451) Solution Heat Treated and Naturally Aged Aluminum Alloy, Sheet and Plate, 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T6 Sheet, -T651 Plate) Solution Heat Treated and Precipitation Heat Treated AMS 4050 Aluminum Alloy Plate, 7050-T7451 AMS 4084 Aluminum Alloy Sheet, 7475-T761 AMS 4085 Aluminum Alloy Sheet, 7475-T761 AMS 4100 Aluminum Alloy Alclad Sheet, 7475-T761 AMS 4201 Aluminum Alloy Plate, 7050-T7651 AMS 4202 Aluminum Alloy Plate, 7475-T7351 AMS 4252 Aluminum Alloy Plate, 7150-T7751 AMS 4085 AMS 4315 AMS 4316 AMS 4048 AMS 4049 Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu Cr (7475-T761) Solution Heat Treated and Overaged Aluminum Alloy Sheet and Plate 7075: (-T76 Sheet, -T7651 Plate) Solution and Precipitation Heat Treated Aluminum Alloy, Alclad Sheet and Plate: (-T76 Sheet, -T7651 Plate) Solution and Precipitation Heat Treated Aluminum Alloy Sheet and Plate, Alclad: (Alclad 7075-O) Annealed Aluminum Alloy Sheet and Plate, Alclad: (Alclad 7075; -T6 Sheet T651 Plate) Solution and Precipitation Heat Treated
8 Cessna Aircraft Company CAGE No Page REQUIREMENTS 4.1 Ultrasonic Inspection Producer shall perform the ultrasonic inspection per CSTI006 or AMS-STD-2154, Class A, or per ASTM B594, Class A, on all wrought aluminum alloys listed in Paragraph 3.0 with thickness dimension inch or greater. The producer shall include the ultrasonic certification along with each shipment. 4.2 Tensile Properties Tensile properties shall meet the requirements of the applicable material specification. 4.3 Electrical Conductivity Electrical conductivity tests shall meet the requirements of the applicable material specification. It is permissible to measure the electrical conductivity on the tensile specimens and/or the delivered sheet and plate material in the T temper. 4.4 Chemistry The material shall meet the chemistry requirements of the applicable material specification. 4.5 Polished Aluminum Sheet When required by Cessna Engineering, polished aluminum sheet shall meet the requirements of CMMP Process Control Documents In certain cases, qualified producers listed in this specification have special process or testing requirements documented in an approved Process Control Document (PCD). These cases include, but are not limited to: a. Material Producers using services such as, but not limited to, heat treatment, ingot production, or other special processes outside their facility that affect the properties of the final product. b. Alloys or tempers requiring closer than standard process controls or inspections to ensure consistent properties. c. Other special circumstances. When a PCD is specified, material shall be produced to those requirements, and the producing mill shall include the PCD number on their certification. Producers shall submit PCDs to Cessna M&P Engineering for review and approval. Once approved, no deviations from the PCD are allowed without prior Cessna M&P Engineering approval. 4.7 Certification The producer shall certify that the ultrasonic test results, as required, tensile properties, electrical conductivity, as required, and chemistry meet the applicable material specification for each lot of material supplied in the -T temper. The producer shall also certify that the capability test results of
9 Cessna Aircraft Company CAGE No Page 4 material supplied in the O temper meet the applicable material specification. Certification shall also include any required PCD number. 5.0 MARKING AND IDENTIFICATION Marking and identification shall be per ASTM B666. In addition, the producer shall include ultrasonic inspection marking by stenciling; or with ultrasonic acceptance stamp on each piece in ink or by steel stamp at one end and preferably on both ends. 6.0 QUALITY Controls shall be established to ensure that the requirements of this specification are complied with. 7.0 QUALIFIED PRODUCERS LIST Material per this specification shall only be procured from the producers listed in Tables I and II. 7.1 Approval of a Producer Facility Producers are qualified by facility, the addresses of which are listed in Table III. The facility qualification is not impacted by a producer name change, provided the producer can demonstrate there are no changes to the manufacturing processes, inspection/testing processes, or quality system. Any changes to the manufacturing and/or inspection/testing processes that may affect material properties must be approved by Cessna M&P before implementation. M&P will determine the requalification steps required for approval. -O- and W- temper qualification shall be based on data analysis of capability test results per the applicable material specification. The QPL is an engineering approval. Additional approval by Supply Chain Quality is required prior to material procurement. 7.2 Data Requirements for Statistical Analysis The producer is required to submit sufficient data for each alloy, form and thickness range to establish material properties on a statistical basis. Cessna M&P Engineering will evaluate the data to ensure conformance to design requirements. 7.3 Renewal of Qualifications Cessna M&P Engineering may request an audit and/or data for assessment for renewal of prior approval. The type and quantity of data needed will be communicated to the producer at the time of such request. 7.4 Process Control Documents Process Control Documents (PCD) as defined in section 4.6, when applicable, are shown after the producer s name (For example: PCD-01) in Tables I & II.
10 Cessna Aircraft Company CAGE No Page 5 Table I Qualified Producers List for Sheet Material Alloy (Note 1) Temper Thickness (in) Qualified Producers Specifications 2024 O AMS-QQ-A-250/4 Alcoa Davenport (PCD-02) 2024 O Alcoa Davenport Works AMS-QQ-A-250/ O AMS-QQ-A-250/4 Alcoa Davenport Works 2024 O Alcoa Davenport Works AMS-QQ-A-250/ MRS O Alcoa Davenport Works AMS-QQ-A-250/ MRS O Alcoa Davenport Works AMS-QQ-A-250/ Fine Grain O Sheet/ coil AMS-QQ-A-250/4 CMMP Fine Grain O AMS-QQ-A-250/4 CMMP T Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/4
11 Cessna Aircraft Company CAGE No Page 6 Table I (Continued) Qualified Producers List for Sheet Material Alloy (Note 1) Temper Thickness (in) Qualified Producers Specifications 2024 T AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/ EF Coil T3 < AMS-QQ-A-250/ MRS T Alcoa Davenport Works AMS-QQ-A-250/ MRS T Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/ T4 T-Form CMMP020 Alclad 2024 O Alcoa Davenport Works AMS-QQ-A-250/5 Alclad 2024 O Alcoa Davenport Works AMS-QQ-A-250/5 Alclad 2024 O Alcoa Davenport Works AMS-QQ-A-250/5 Alclad 2024 O AMS-QQ-A-250/5 Alcoa Davenport Works
12 Cessna Aircraft Company CAGE No Page 7 Table I (Continued) Qualified Producers List for Sheet Material Alloy (Note 1) Temper Thickness (in) Qualified Producers Specifications Alclad 2024 O Alcoa Davenport Works AMS-QQ-A-250/5 Alclad 2024 Fine Grain O Sheet/ coil AMS-QQ-A-250/5 CMMP021 Alclad 2024 T Alcoa Davenport Works AMS-QQ-A-250/5 Alclad 2024 T Alcoa Davenport Works AMS-QQ-A-250/5 Alclad 2024 T Alcoa Davenport Works AMS-QQ-A-250/5 Alclad 2024 T Alcoa Davenport Works AMS-QQ-A-250/5 Alclad 2024 EF Coil T3 < AMS-QQ-A-250/5 Alclad 2024 T Alcoa Davenport Works AMS-QQ-A-250/5 Alclad 2024 T Alcoa Davenport Works AMS-QQ-A-250/5 Alclad 2024 T4 T-Form CMMP020 Alclad 2024 MRS T AMS-QQ-A-250/5 Alclad 2024 MRS T AMS-QQ-A-250/5 Alclad 2024 MRS T AMS-QQ-A-250/5
13 Cessna Aircraft Company CAGE No Page 8 Table I (Continued) Qualified Producers List for Sheet Material Alloy (Note 1) Temper Thickness (in) Qualified Producers Specifications 2524 T Alcoa Davenport Works CMMP008 Alclad 2524 T Alcoa Davenport Works CMMP T Alcoa Davenport Works AMS 4347 CMMP MRS T Alcoa Davenport Works AMS 4347 CMMP T Alcoa Davenport (PCD-02) CMMP T Alcoa Davenport (PCD-02) CMMP T Alcoa Davenport Works CMMP O Alcoa Davenport Works AMS 4025 (Note 2) 6061 O Alcoa Davenport Works AMS 4025 (Note 2) 6061 O Alcoa Davenport Works AMS 4025 (Note 2) 6061/ Fine Grain O Sheet/ Coil AMS 4025 (Note 2) CMMP T Alcoa Davenport Works AMS 4026 (Note 3) 6061 T AMS T Alcoa Davenport Works AMS 4026 (Note 3) 6061 T Alcoa Davenport Works AMS 4027 (Note 4) 6061 T Alcoa Davenport Works AMS 4027 (Note 4) 6061 T Alcoa Davenport Works AMS 4027 (Note 4) 7075 O Alcoa Davenport Works AMS-QQ-A-250/12
14 Cessna Aircraft Company CAGE No Page 9 Table I (Continued) Qualified Producers List for Sheet Material Alloy Temper Thickness (in) Qualified Producers Specifications 7075 O Alcoa Davenport Works AMS-QQ-A-250/ O Alcoa Davenport Works AMS-QQ-A-250/ / Fine Grain O Sheet/ Coil AMS-QQ-A-250/12 CMMP T Alcoa Davenport Works AMS-QQ-A-250/ T AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/24 AMS 4315, 7075 T Alcoa Davenport Works AMS-QQ-A-250/24 AMS4315 Alclad 7075 O Alcoa Davenport Works AMS-QQ-A-250/13 AMS 4048, Alclad 7075 O Alcoa Davenport Works AMS-QQ-A-250/13 AMS 4048, Alclad 7075 O Alcoa Davenport Works AMS-QQ-A-250/13 AMS 4048, Alclad 7075 O AMS-QQ-A-250/13, AMS 4048 Alclad 7075 O Alcoa Davenport Works AMS-QQ-A-250/13 AMS 4048 Alclad 7075 /Fine Grain O Sheet/ coil AMS-QQ-A-250/13 AMS 4048, Alclad 7075 T Alcoa Davenport Works AMS-QQ-A-250/13 AMS 4049, Alclad 7075 T AMS-QQ-A-250/13, AMS 4049 Alclad 7075 T Alcoa Davenport Works AMS-QQ-A-250/13 AMS 4049,
15 Cessna Aircraft Company CAGE No Page 10 Table I (Continued) Qualified Producers List for Sheet Material Alloy Temper Thickness (in) Qualified Producers Specifications Alclad 7075 T Alcoa Davenport Works AMS-QQ-A-250/13 AMS 4049 Alclad 7075 T Alcoa Davenport Works AMS-QQ-A-250/25 AMS 4316, Alclad 7075 T Alcoa Davenport Works AMS-QQ-A-250/25 AMS T Alcoa Davenport Works AMS T Alcoa Davenport Works AMS T Alcoa Davenport Works AMS / Fine Grain O Sheet/ coil< AMS 4084 CMMP021 Alclad 7475 /Fine Grain O Sheet/ coil< AMS 4100 CMMP021 NOTES: 1. MRS: Minimum Residual Stress 2. AMS-QQ-A-250/11 superseded by AMS 4025 for 6061-O. 3. AMS-QQ-A-250/11 superseded by AMS 4026 for 6061-T4, -T42, and T AMS-QQ-A-250/11 superseded by AMS 4027 for 6061-T6, T62, and T651.
16 Cessna Aircraft Company CAGE No Page 11 Table II Qualified Producers List for Plate Material Alloy Temper Thickness (in) Qualified Producers Specifications 2024 O Alcoa Davenport Works AMS-QQ-A-250/4 (PCD-04) 2024 O Alcoa Davenport (PCD-02) AMS-QQ-A-250/4 (PCD-04) 2024 O Alcoa Davenport Works AMS-QQ-A-250/ O Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/4 Alcoa Kitts Green(Europe) 2024 T Alcoa Davenport Works AMS-QQ-A-250/4 Alcoa Kitts Green (Europe) 2024 T Alcoa Davenport Works AMS-QQ-A-250/4
17 Cessna Aircraft Company CAGE No Page 12 Table II (Continued) Qualified Producers List for Plate Material Alloy Temper Thickness (in) Qualified Producers Specifications 2024 T Alcoa Davenport Works AMS-QQ-A-250/ Alclad T AMS-QQ-A-250/ Alclad O Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works CMMP O Alcoa Davenport Works AMS 4025 (Note 1) 6061 T Alcoa Davenport Works AMS 4027 (Note 2) 6061 T AMS T Alcoa Davenport Works AMS 4027 (Note 2) 7050 T7451 < Alcoa Davenport Works AMS T AMS T Alcoa Davenport Works AMS T Alcoa Davenport Works AMS T Alcoa Davenport Works AMS T Alcoa Davenport Works AMS 4050
18 Cessna Aircraft Company CAGE No Page 13 Table II (Continued) Qualified Producers List for Plate Material Alloy Temper Thickness (in) Qualified Producers Specifications 7050 T Alcoa Davenport Works AMS T Alcoa Davenport Works AMS T Alcoa Davenport Works AMS T Alcoa Davenport Works AMS T AMS T Alcoa Davenport Works CMMP010 Alcoa Kitts Green (Europe) 7050 T Alcoa Davenport Works CMMP010 (PCD-03) AMS-QQ-A-250/ T AMS-QQ-A-250/ T AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/ T AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/12 Alcoa Kitts Green(Europe) Table II (Continued)
19 Cessna Aircraft Company CAGE No Page 14 Qualified Producers List for Plate Material Alloy Temper Thickness (in) Qualified Producers Specifications 7075 T Alcoa Davenport Works AMS-QQ-A-250/12 Alcoa Kitts Green(Europe) 7075 T Alcoa Davenport Works AMS-QQ-A-250/12 Alcoa Kitts Green(Europe) 7075 T Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works AMS-QQ-A-250/ T Alcoa Davenport Works CMMP030 (PCD- 01) Kaiser Trentwood works 7075 T AMS-QQ-A-250/24 Alcoa Davenport Works AMS T Alcoa Davenport Works AMS-QQ-A-250/24 AMS T Alcoa Davenport Works AMS-QQ-A-250/24 AMS T Alcoa Davenport Works AMS 4252
20 Cessna Aircraft Company CAGE No Page 15 Table II (Continued) Qualified Producers List for Plate Material Alloy Temper Thickness (in) Qualified Producers Specifications 7475 T Alcoa Davenport Works AMS T AMS T Alcoa Davenport Works AMS T Alcoa Davenport Works AMS T Alcoa Davenport Works AMS T Alcoa Davenport Works AMS 4202 NOTES: 1. AMS-QQ-A-250/11 superseded by AMS 4025 for 6061-O. 2. AMS-QQ-A-250/11 superseded by AMS 4027 for 6061-T6, T62, and T651.
21 Cessna Aircraft Company CAGE No Page 16 Table III Qualified Producer Facility Addresses Alcoa Kitts Green (Europe) Flat Rolled Products P.O. Box 383,Kitts Green Road, Kitts Green, Birmingham, B33 9QR, England Alcoa Davenport Works 4879 State St, Bettendorf, IA (formerly ALCAN Ravenswood) Ravenswood Operations P.O. Box 98 Ravenswood, WV Kaiser Aluminum (Trentwood Works) P.O. Box Trentwood Works Spokane, Washington (formerly ALCAN Rhenalu) Zone Industrielle Des Listes BP Issoire, France (formerly Ranshofen Aluminum Walzwerk GmbH) P.O.B 32 A-5282 Ranshofen, Austria GmbH (formerly Corus Aluminium Walzprodukte or Hoogovens Aluminum Walzprodukte) Carl-Spaeter-Strasse 10 Postfach D Koblenz, Germany
DIVISION 2600 MATERIALS CERTIFICATIONS
TABLE OF CONTENTS DIVISION 2600 MATERIALS CERTIFICATIONS SECTION 2601 - MATERIALS CERTIFICATIONS... 2600-1 PAGE i SECTION 2601 MATERIALS CERTIFICATIONS 2601.1 DESCRIPTION This specification governs the
More informationAUDIT PROGRAM. Revision 6 Dated September 29, Management Systems Analysis, Inc. P.O. Box 136, Royersford, PA
AUDIT PROGRAM Revision 6 Dated September 29, 2010 Management Systems Analysis, Inc. P.O. Box 136, Royersford, PA 19468 610-409-0168 jhighl@aol.com Approved: 1.0 Objective 2.0 Scope 3.0 General To describe
More informationSERVICE LETTER EXHAUST - TRANSMITTAL OF NORDAM S SERVICE BULLETIN CIT SV 78-05, THRUST REVERSER MAINTENANCE LOCK ASSEMBLY REPLACEMENT
Citation TITLE SERVICE LETTER SL680-78-06 EXHAUST - TRANSMITTAL OF NORDAM S SERVICE BULLETIN, THRUST REVERSER MAINTENANCE LOCK ASSEMBLY REPLACEMENT EFFECTIVITY MODEL SERIAL NUMBERS 680 (Citation Sovereign)
More informationSubsea Performance Bolt Workshop
Subsea Performance Bolt Workshop API Spec Q1, Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry, 9 th Edition API Spec
More informationDOCUMENT E-275 AUTHORIZED ALTERNATIVE SPECIFICATIONS
DOCUMENT E-275 AUTHORIZED ALTERNATIVE SPECIFICATIONS THIS DOCUMENT CONSISTS OF Cover Page, Pages i-v, Pages 1-11 This document is uncontrolled once it is printed. Consult Document Control for the latest
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 9154 Second edition 2016-02-15 Aerospace Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa Procurement specification Aéronautique et
More informationCSA STANDARDS W47.1, W47.2 & W186 CERTIFICATION GUIDE FOR APPLICANT COMPANIES TO. Congratulations and Welcome to the Certification Application Process
CERTIFICATION GUIDE FOR APPLICANT COMPANIES TO CSA STANDARDS W47.1, W47.2 & W186 Congratulations and Welcome to the Certification Application Process This guide will help you as an applicant company meet
More informationAsia
Administered by PRI July 21, 2011 Mr. Mike Hushek Quality Assurance Manager Dear Mike Hushek The report of the Nadcap accreditation audit of your facility on November 09 - November 12, 2010 has been approved
More informationSFI SPECIFICATION 29.2 EFFECTIVE: FEBRUARY 9, 2006 * PRODUCT: High Horsepower Automatic Transmission Flexplates
SFI SPECIFICATION 29.2 EFFECTIVE: FEBRUARY 9, 2006 * PRODUCT: High Horsepower Automatic Transmission Flexplates 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and
More informationAccredited Testing Facility (ATF) 3 rd Year On-Site Audit Checklist
Facility Information: ATF Certificate #: Test Facility Name: Test Facility Representative: Address: City: State Zip: Phone Phone: Fax: Email: Facility Assessor: AWS Auditor: Date: Date: 3 rd Year On-Site
More informationSTEEL FABRICATOR REGISTRATION PROGRAM
STEEL FABRICATOR REGISTRATION PROGRAM The Washington Association of Building Officials (WABO) maintains a roster of registered fabricators engaged in the manufacture of Structural Steel systems and assemblies.
More informationTABLE 1 Metallic Materials SUPERSEDED SPEC./ OBSOLETE MATERIAL DESCRIPTION
TABLE 1 Metallic Materials Aluminum 2024 Bars, Rods, Shapes, Tubing, and Wire; Extruded QQ-A-200/3 AMS-QQ-A-200/3 MMPDS Section 3.2.4 6061 QQ-A-200/8 AMS-QQ-A-200/8 MMPDS Section 3.6.2 7075 1100 Gen T76
More informationSpecification for Threading, Gauging and Thread Inspection of Casing, Tubing, and Line Pipe Threads
Specification for Threading, Gauging and Thread Inspection of Casing, Tubing, and Line Pipe Threads API SPECIFICATION 5B FIFTEENTH EDITION, APRIL 2008 EFFECTIVE DATE: OCTOBER 1, 2008 Specification for
More informationCALIFORNIA INDEPENDENT SYSTEM OPERATOR CORPORATION FERC ELECTRIC TARIFF ORIGINAL VOLUME NO. III Original Sheet No. 977 METERING PROTOCOL
ORIGINAL VOLUME NO. III Original Sheet No. 977 METERING PROTOCOL ORIGINAL VOLUME NO. III Original Sheet No. 978 METERING PROTOCOL Table of Contents MP 1 OBJECTIVES, DEFINITIONS AND SCOPE MP 1.1 Objective
More informationIATF - International Automotive Task Force Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations
Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
More informationIPC-D-859. Design Standard for Thick Film Multilayer Hybrid Circuits ANSI/IPC-D-859. The Institute for. Interconnecting
The Institute for Interconnecting and Packaging Electronic Circuits Design Standard for Thick Film Multilayer Hybrid Circuits ANSI/ Original Publication December 1989 A standard developed by the Institute
More informationSFI SPECIFICATION 29.1 EFFECTIVE: AUGUST 26, 2016 *
SFI SPECIFICATION 29.1 EFFECTIVE: AUGUST 26, 2016 * PRODUCT: Automatic Transmission Flexplates 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards
More informationProcess for the Evaluation and Acceptance of Building Products in the USA
Process for the Evaluation and Acceptance of Building Products in the USA Rick Okawa, P.E. Deputy Vice President of Global Services and Business Development An Integrated Building System Product Certification
More informationCALIFORNIA INDEPENDENT SYSTEM OPERATOR CORPORATION FERC ELECTRIC TARIFF FIRST REPLACEMENT VOLUME NO. II Original Sheet No. 727 METERING PROTOCOL
FIRST REPLACEMENT VOLUME NO. II Original Sheet No. 727 METERING PROTOCOL FIRST REPLACEMENT VOLUME NO. II Original Sheet No. 728 METERING PROTOCOL Table of Contents MP 1 OBJECTIVES, DEFINITIONS AND SCOPE
More informationContents. Rev. 2, 5/12/2016 1
Answers to Frequently Asked Questions for CTI STD-201 Thermal Certification of Cooling Towers, Closed Circuit Coolers and Evaporative Refrigerant Condensers Contents What is CTI STD-201?... 3 To what equipment
More informationMARPA DOCUMENT MARPA Revision 1.1
MARPA 1100 - Page 1 MARPA DOCUMENT MARPA 1100 Revision 1.1 STREAMLINE PROGRAM FOR PMA APPLICATIONS OF NON-SAFETY-SIGNIFICANT ARTICLES SUBMITTED BY EXPERIENCED APPLICANTS WITH A QUALIFYING PERFORMANCE RECORD
More informationSERVICE BULLETIN REVISION
Revision 1 REVISION TRANSMITTAL SHEET This sheet transmits Revision 1 to, which: A. Adds the 8941001-12 CD for the LDI software installation to all the kits in the MATERIAL INFORMATION section. NOTE: This
More informationPARAGRAPH INDEX QUALITY ASSURANCE INSTRUCTIONS TO SUPPLIERS NON DESTRUCTIVE TESTING
QAIS NO: SUBJECT: Q5B-008L NON DESTRUCTIVE TESTING PARAGRAPH INDEX 1. INTRODUCTION 2. APPLICABILITY 3. REFERENCED AND ASSOCIATED DOCUMENTS 4. RESPONSIBILITY FOR QUALIFICATION 5. QUALIFICATION LEVELS AND
More informationApplication and Instructions for Firms
United States Environmental Protection Agency Office of Prevention Pesticides, and Toxic Substances EPA 747-B-99-001 March 2010 https://www.epa.gov/lead Application and Instructions for Firms Applying
More informationAreas of impact for client consideration taken from the Rules for achieving and maintaining IATF recognition 4 th Edition for ISO/TS 16949
Areas of for client consideration taken from the Rules for achieving and maintaining IATF recognition 4 th Edition for ISO/TS 16949 1 st February 2014 1 Foreword Introduction The IATF recognizes certification
More informationTITLE 595. DEPARTMENT OF PUBLIC SAFETY CHAPTER 10. CLASS D DRIVER LICENSES AND IDENTIFICATION CARDS AND MOTOR LICENSE AGENT PROCEDURES
TITLE 595. DEPARTMENT OF PUBLIC SAFETY CHAPTER 10. CLASS D DRIVER LICENSES AND IDENTIFICATION CARDS AND MOTOR LICENSE AGENT PROCEDURES RULEMAKING ACTION: EMERGENCY adoption PROPOSED RULES: Subchapter 11.
More informationCALIFORNIA INDEPENDENT SYSTEM OPERATOR CORPORATION FERC ELECTRIC TARIFF FIRST REPLACEMENT VOLUME NO. II Original Sheet No. 727 METERING PROTOCOL
FIRST REPLACEMENT VOLUME NO. II Original Sheet No. 727 METERING PROTOCOL FIRST REPLACEMENT VOLUME NO. II Original Sheet No. 728 METERING PROTOCOL Table of Contents MP 1 OBJECTIVES, DEFINITIONS AND SCOPE
More informationMETRIC MIL-C-83522/16B w/amendment 1 17 AUGUST 2004 SUPERSEDING MIL-C-83522/16B 11 May 1995 MILITARY SPECIFICATION SHEET
METRIC MIL-C-83522/16B 17 AUGUST 2004 SUPERSEDING MIL-C-83522/16B 11 May 1995 MILITARY SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, PLUG, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETERS DIAMETER
More informationGUIDE FOR ASME REVIEW TEAMS FOR REVIEW OF APPLICANTS FOR ASME CERTIFICATES OF AUTHORIZATION {A, M, PP, S, E, H, HLW, U, UM, U2, U3, PRT and T}
GUIDE FOR ASME REVIEW TEAMS FOR REVIEW OF APPLICANTS FOR ASME CERTIFICATES OF AUTHORIZATION {A, M, PP, S, E, H, HLW, U, UM, U2, U3, PRT and T} The American Society of Mechanical Engineers Two Park Avenue
More informationSDDOT CONSTRUCTION MANUAL PROJECT MANAGEMENT SECTION CHAPTER 3 MATERIALS TABLE OF CONTENTS
SDDOT CONSTRUCTION MANUAL PROJECT MANAGEMENT SECTION CHAPTER 3 MATERIALS TABLE OF CONTENTS ITEM PAGE SDDOT MATERIALS MANUAL...3-2 ADMINISTRATION OF MATERIALS CERTIFICATION AND TESTING PROCEDURES...3-2
More informationFSC STANDARD. Standard for Multi-site Certification of Chain of Custody Operations. FSC-STD (Version 1-0) EN
FOREST STEWARDSHIP COUNCIL INTERNATIONAL CENTER FSC STANDARD Standard for Multi-site Certification of Chain of Custody Operations FSC-STD-40-003 (Version 1-0) EN 2007 Forest Stewardship Council A.C. All
More informationGUIDELINE. of the European Committee for Welding of Railway Vehicles (ECWRV) ( ) PART 1
GUIDELINE of the European Committee for Welding of Railway Vehicles (ECWRV) (2016-05-10) PART 1 Procedure for the application of EN 15085 and certification of welding manufacturers for welding railway
More informationCSWIP Program. The following documents are included in this package. Please scroll down to view all documents or click on the BLUE link.
CSWIP Program The following documents are included in this package. Please scroll down to view all documents or click on the BLUE link. TABLE OF CONTENTS CSWIP Program Information CSWIP Application Body
More informationProgram Guidelines for Security Fenestration Rating and Certification Program Administered by Architectural Testing
Program Guidelines for Security Fenestration Rating and Certification Program Administered by Architectural Testing TABLE OF CONTENTS 1.0 FORWARD...2 2.0 GENERAL...2 3.0 REFERENCED DOCUMENTS...4 4.0 DEFINITION
More informationM E M O R A N D U M I.S.
Physikalisch-Technische Bundesanstalt Department 3.6 " Intrinsic safety and Safety of Systems" 38023 Braunschweig Germany P.O. Box 33 45 Tel. ++49 531 592-3630 Fax ++49 531 592-3605 M E M O R A N D U M
More informationGRCA FULL MEMBER GRADE (GRC Manufacturer) Regulations, Membership Procedure and Assessment
GRCA FULL MEMBER GRADE (GRC Manufacturer) Regulations, Membership Procedure and Assessment The International Glassfibre Reinforced Concrete Association (GRCA) October 2017 The International Glassfibre
More informationAssessment of Vaisala Veriteq viewlinc Continuous Monitoring System Compliance to 21 CFR Part 11 Requirements
/ White PAPer Assessment of Vaisala Veriteq viewlinc Continuous Monitoring System Compliance to 21 CFR Part 11 Requirements The 21 CFR Part 11 rule states that the FDA view is that the risks of falsification,
More informationIATF - International Automotive Task Force Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations
Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
More informationC-BPVCA ADMINISTRATIVE PROCEDURES DELEGATED TO ASME CONFORMITY ASSESSMENT STAFF
PROCEDURES ISSUE 1, REVISION 10 C-BPVCA ADMINISTRATIVE PROCEDURES DELEGATED TO ASME CONFORMITY ASSESSMENT STAFF Approved by the Committee on Boiler and Pressure Vessel Conformity Assessment 9/11/2018 The
More informationBattery Program Management Document
Battery Program Management Document Revision 5.1 February 2011 CTIA Certification Program 1400 16 th Street, NW, Suite 600 Washington, DC 20036 e-mail: certification@ctia.org Telephone: 1.202.785.0081
More informationSECTION (16410) - ENCLOSED SWITCHES AND CIRCUIT BREAKERS
SECTION 26 28 16 (16410) - ENCLOSED SWITCHES AND CIRCUIT BREAKERS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Individually Mounted Switches and Circuit Breakers Used for the following: a. Service
More informationTerms of Use. Changes. General Use.
Terms of Use THESE TERMS AND CONDITIONS (THE TERMS ) ARE A LEGAL CONTRACT BETWEEN YOU AND SPIN TRANSFER TECHNOLOGIES ( SPIN TRANSFER TECHNOLOGIES, STT, WE OR US ). THE TERMS EXPLAIN HOW YOU ARE PERMITTED
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 4 6587 (56) 699 054 www.icc es.org ESR 78 Reissued /07 This report is subject to renewal /09. DIVISION: 06 00 00 WOOD, PLASTICS
More informationSUBJECT: CHAMPION AEROSPACE SLICK SERVICE BULLETIN SB1-12
CONTINENTAL MOTORS, INC AIRCRAFT ENGINE SERVICE BULLETIN Compliance Will Enhance Safety SUBJECT: CHAMPION AEROSPACE SLICK SERVICE BULLETIN COMPLIANCE: As outlined in Slick compliance section Category 3
More informationSection Qualifications of Audit teams Qualifications of Auditors Maintenance and Improvement of Competence...
Section 9. SFI 2010-2014 Audit Procedures and Auditor Qualifications and Accreditation Updated January 2011 Section 9 Introduction... 3 1. Scope... 3 2. Normative Reference... 3 3. Terms and Definitions...
More informationAgreement on High Security Locks
Agreement on High Security Locks Participants: Certification Body Signatory CNPP VdS Schadenverhütung Svensk Brand- och Säkerhetscertifiering AB (SBSC) Associated Testing Laboratories Signatory CNPP VdS
More informationR318 - Specific Requirements: Forensic. Examination Accreditation Program - Inspection
Page 1 of 6 Examination Accreditation Program - October 2015 2015 by A2LA. All rights reserved. No part of this document may be reproduced in any form or by any means without the prior written permission
More informationOIML-CS PD-05 Edition 2
PROCEDURAL DOCUMENT OIML-CS PD-05 Edition 2 Processing an application for an OIML Type Evaluation Report and OIML Certificate OIML-CS PD-05 Edition 2 ORGANISATION INTERNATIONALE DE MÉTROLOGIE LÉGALE INTERNATIONAL
More informationSALT RIVER PROJECT STANDARDS OF CONDUCT AND WRITTEN PROCEDURES FOR COMPLIANCE WITH FERC ORDER 717 February 11, 2009
SALT RIVER PROJECT STANDARDS OF CONDUCT AND WRITTEN PROCEDURES FOR COMPLIANCE WITH FERC ORDER 717 February 11, 2009 The Salt River Project Agricultural Improvement and Power District ( SRP ), in compliance
More informationJun11 Rev A
Product Specification MULTIGIG* Extreme 108-2072-2 28Jun11 Rev A 1. SCOPE 1.1. Content This document is specific to features, performance and testing of a metal shell and hardware kit which can be installed
More informationUSDA ISO Guide 65 Program Accreditation for Certification Bodies
Page 1 of 6 USDA ISO Guide 65 Program Accreditation for Certification Bodies 1 Purpose This document provides the requirements to be met in designing a USDA ISO Guide 65 Program. It also provides the requirements
More informationFlorida Building Code Online
Florida Building Code Online http://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wgevxqwtdqsxyieb4opodd... Page 1 of 2 12/2/2010 BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats
More informationSPECIFICATION AND GRADE YIELD EXT % TENSILE Y/T ELONG % (IN ) MIN: MAX: QT - QUENCH & TEMPERED SR - STRESS RELIEVED AR - AS ROLLED
DATE: 08/8/4 UNITED STATES STEEL CORPORATION TUBULAR S TIME: 07:5:58 CERTIFIED REPORT SERIAL NO: L005857 (IN ACCORDANCE WITH ISO 0474/EN004/DIN50049 "type.") MILL ORDER/ITEM NO SHIPPERS NO. P.O. NUMBER
More informationVirginia State Fire Marshal s Office
Virginia State Fire Marshal s Office Application for the USE of PYROTECHNICS INSIDE State-owned Buildings and OUTDOORS on State-owned Property Before a Proximate Audience 1. Applicant Name/Company: 2.
More informationCRD - NPA 11/ May 2005 Page 1 of 14 I-B. Paragraph CS / F. Fagegaltier
CRD - NPA 11/2004 Comment I-B. Paragraph CS 25.302 3 / F. Fagegaltier The proposed text refers to appendix K. This appendix defines factors of safety (figure 1, figure 2, etc). Does this means that these
More informationMARPA DOCUMENT MARPA 1100 DRAFT
Page 1 MARPA DOCUMENT MARPA 1100 DRAFT STREAMLINE PROGRAM FOR PMA APPLICATIONS OF NON-SAFETY-SIGNIFICANT ARTICLES SUBMITTED BY EXPERIENCED APPLICANTS WITH A QUALIFYING PERFORMANCE RECORD Page 2 TABLE OF
More informationEthics and Professional Conduct for Washington CPAs. Course #4300S Exam Packet
Ethics and Professional Conduct for Washington CPAs Course #4300S Exam Packet ETHICS AND PROFESSIONAL CONDUCT FOR WASHINGTON CPAS (COURSE #4300S) COURSE DESCRIPTION This course is designed to meet the
More informationSMU-C2 Series MU HOUSING - for ø 2 mm cord -
DOCUMENT NUMBER S05-H079-01E MU HOUSING - for ø 2 mm cord - TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN. TEL: +81-47-388-6111 FAX: +81-47-388-4477
More informationAPPLICATION FOR AIR EMISSION TESTING BODY (AETB) ACCREDITATION
APPLICATION FOR AIR EMISSION TESTING BODY (AETB) ACCREDITATION Source Emission Measurement Quality Assurance Programs (SEMQAP) Stack Testing Accreditation Council (STAC) A. Purpose of Application: Mark
More informationStandards Designation and Organization Manual
Standards Designation and Organization Manual InfoComm International Standards Program Ver. 2014-1 April 28, 2014 Issued by: Joseph Bocchiaro III, Ph.D., CStd., CTS-D, CTS-I, ISF-C Director of Standards
More information3M Ribbon Cable Socket and Header, Series 451 & " x.050" (1.27 mm x 1.27 mm)
1 of 8 3M Ribbon Cable Socket and Header, Series 451 & 452.050" x.050" (1.27 mm x 1.27 mm) Product Specification: 78-5102-0091-4 Revised: 05-01-2013 2 of 8 Page Cover Page..... 1 Contents 2 1. Scope......
More informationCalibration Procedure
Management Procedure 2540 Revision: C Date Issued: July 5, 2005 Date Revised: March 6, 2012 Calibration Procedure DeFelsko Corporation PosiTector 6000 FKS PosiTector 6000 NKS Coating Thickness Probes Table
More informationNEW YORK CITY DEPARTMENT OF BUILDINGS. Notice of Public Hearing and Opportunity to Comment on Proposed Rules
NEW YORK CITY DEPARTMENT OF BUILDINGS Notice of Public Hearing and Opportunity to Comment on Proposed Rules What are we proposing? The Department of Buildings (DOB) is proposing to amend 1 RCNY 104-09
More informationReceipt Label Specifications Shipping to Mexico
Receipt Label Specifications Shipping to Mexico Revised August 2017 Sensata Technologies de Mexico S. de R.L. de C.V. Document ID:????? Copyright 2017 Sensata Technologies. All rights reserved. SENSATA
More informationMILITARY STANDARD NONDESTRUCTIVE TESTING PERSONNEL QUALIFICATION AND CERTIFICATION
NOT MEASUREMENT SENSITIVE MIL STD 410E 25 January 1991 SUPERSEDING MIL STD 410D 23 JULY l974 MILITARY STANDARD NONDESTRUCTIVE TESTING PERSONNEL QUALIFICATION AND CERTIFICATION AMSC N/A AREA NDTI DISTRIBUTION
More informationRead Me First for the HP ProCurve Wireless Products - software ver
Read Me First for the Wireless Products - software ver. 2.1.0 This Read Me First provides information for the following products: Wireless Access Point 520wl (J8133A) 802.11a AP Kit 160wl - N America +
More informationSOUTHERN CALIFORNIA EDISON COMPANY
SOUTHERN CALIFORNIA EDISON COMPANY COMPLIANCE PROCEDURES IMPLEMENTING FERC ORDER 717C STANDARDS OF CONDUCT Version 1.2 Updated June 14, 2017 Purpose: To provide Southern California Edison s (SCE) overall
More informationTimber Products Inspection, Inc.
Timber Products Inspection, Inc. Product Certification Public Document Timber Products Inspection, Inc. P.O. Box 919 Conyers, GA 30012 Phone: (770) 922-8000 Fax: (770) 922-1290 TP Product Certification
More informationAccreditation Body Evaluation Procedure for AASHTO R18 Accreditation
Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation Final August 9, 2016 Page 1 of 12 Section Number Table of Contents Title of Section 0 Purpose 1 Scope 2 References 3 Objectives 4 Criteria
More information"Energy and Ecological Transition for the Climate" Label Control and Monitoring Plan Guidelines
MINISTRY OF ENVIRONMENT, ENERGY AND THE SEA "Energy and Ecological Transition for the Climate" Label Control and Monitoring Plan Guidelines Contents FOREWORD... 3 INTRODUCTION... 4 I. INITIAL CERTIFICATION
More informationSECTION ELECTRIC METERING
SECTION 26 27 13 ELECTRIC METERING SPEC WRITER NOTES: Use this section only for NCA projects Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
More informationGreen Squared Certification Manual
SCS Global Services Manual Green Squared Certification Manual Environmental Certification Services Division 2000 Powell Street, Ste. 600, Emeryville, CA 94608 USA +1.510.452.8000 main +1.510.452.8001 fax
More informationPRODUCT CERTIFICATION SCHEME FOR CHILDREN TOYS
Ref No: RACS/PCS/22 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Children Toys
More informationPI31xx Product Family Reflow Soldering Guidelines
APPLICATION NOTE AN:302 PI31xx Product Family Reflow Soldering Guidelines Chris Swartz Principal Applications Engineer Contents Page Introduction 1 Storage 1 Solder Paste 1 Leaded Applications 1 PCB Considerations
More informationDIGITALSIGN - CERTIFICADORA DIGITAL, SA.
DIGITALSIGN - CERTIFICADORA DIGITAL, SA. TIMESTAMP POLICY VERSION 1.1 21/12/2017 Page 1 / 18 VERSION HISTORY Date Edition n.º Content 10/04/2013 1.0 Initial drafting 21/12/2017 1.1 Revision AUTHORIZATIONS
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 11
Amphenol Amphenol Taiwan Corporation Sheet 1 of 11 Title: Part Number: Description: RJ-MAG Connector Product Specification RJMG21202XXXXXX RJmag 1 x 2-Port W/ LED Revisions Control Rev. ECN Number Originator
More informationVendor Partnership Manual. Section 6 EDI
Section 6 No changes have occurred in this chapter since our last update in January 2017. TABLE OF CONTENTS 1. Electronic Data Interchange Trading Partner Agreement... 1 2. Requirements - Shopko Stores
More informationSECTION.0900 LEAD-BASED PAINT HAZARD MANAGEMENT PROGRAM FOR RENOVATION, REPAIR AND PAINTING
SECTION.0900 LEAD-BASED PAINT HAZARD MANAGEMENT PROGRAM FOR RENOVATION, REPAIR AND PAINTING 10A NCAC 41C.0901 GENERAL (a) In addition to the definitions found in 40 CFR Part 745 Subpart E and Subpart L
More informationISO/IEC :2015 IMPACT ON THE CERTIFIED CLIENT
ISO/IEC 17021-1:2015 IMPACT ON THE CERTIFIED CLIENT P R E S E N T E D B Y S H A N N O N C R A D D O C K, P R O G R A M S & A C C R E D I T A T I O N S M A N A G E R TODAY S APPROACH What is ISO/IEC 17021-1:2015?
More informationCUMBRE VISTA HOMEOWNERS ASSOCIATION, INC. RECORDS INSPECTION AND COMMUNICATIONS POLICY AND PROCEDURE. 1-Pl) ~ \ 1
CUMBRE VISTA HOMEOWNERS ASSOCIATION, INC. RECORDS INSPECTION AND EMAIL COMMUNICATIONS POLICY AND PROCEDURE Effective Date: ~ \ 1 1-Pl) Pursuant to Article XIII of the Association's Bylaws, "records and
More informationQuality Assurance Program Addendum for IEC Specific Product Testing
Quality Assurance Program Addendum for IEC 61850 Specific Product Testing July 15, 2008 Version 1.3 Prepared for the UCA International Users Group - 1-07/15/2008 PREPARED BY: UCA International Users Group
More informationGuidance of NOP Certification system Page 1/8
Page 1/8 I. Introduction A. Regulation Since October 21, 2002, The USDA implemented its organic regulations for the production, labeling, and inspection of organic products: the National Organic Program
More informationPlate. Channels - Standard Structural* Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue.
Channels - Standard Structural* Grades Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue. A Depth B Flange Width C Web Thickness Estimated Weight - Lbs. Lbs/Foot
More informationFederal Communication Commission (FCC) Office of Engineering and Technology (OET) Program Accreditation Procedure
PJLA offers third-party accreditation services to Conformity Assessment Bodies (i.e. Testing and/or Calibration Laboratories, Reference Material Producers, Field Sampling and Measurement Organizations
More informationWelding Certificate TÜV SÜD
Welding Certificate TÜV SÜD-00064.2013.004 in accordance with EN 1090-1, table B.1, its hereby declared: The manufacturer has produced evidence that he fulfills the requirements of the European standard
More informationMIL-PRF SUMMARY OF CHANGES FOR DRAFT REVISION L 01 February, 2019
The following table summarizes changes to MIL-PRF-38534 Revision K that are currently being proposed for MIL-PRF-38534 Revision L. 1 TOC Paragraph 4. Correct spelling from VERIFICAITON to VERIFICATION
More informationAWS QC Standard for the AWS Certification of Arc Welding Personnel
AWS QC19-2002 Standard for the AWS Certification of Arc Welding Personnel Keywords: Robotic, robot, arc welding AWS QC19:2002 Standard for the A WS Certification of Arc Welding Personnel Prepared by: The
More informationCertified Assessor. Application for COBIT Certified Assessor
Application for COBIT Certified Application for COBIT Certified REQUIREMENTS TO BECOME A COBIT CERTIFIED ASSESSOR There is a required US $100 Application processing fee. Payment of the COBIT Certified
More informationEnterprise - Control System Integration Part 2: Object Model Attributes
ISA Draft 95.00.02 Draft Standard Enterprise - Control System Integration Part 2: Object Model Attributes Draft 9 May 2001 Deleted: 8 Deleted: April This document is a draft that represents work being
More informationCode Version *Approved by DBPR. Approvals by DBPR shall be reviewed and ratified by the POC and/or the Commission if necessary.
Florida Building Code Product Approval FL14752.32-R3 Impact 12 0 x 6 8 Outswing, 3/4 Lite DP50 FL # Application Type FL14752-R3 Revision Code Version 2010 Application Status Comments Archived Approved
More informationGDPR AMC SAAS AND HOSTED MODULES. UK version. AMC Consult A/S June 26, 2018 Version 1.10
GDPR AMC SAAS AND HOSTED MODULES UK version AMC Consult A/S June 26, 2018 Version 1.10 INDEX 1 Signatures...3 2 General...4 3 Definitions...5 4 Scoping...6 4.1 In scope...6 5 Responsibilities of the data
More informationCA ELAP Expert Review Panel Meeting January 31, EPA Perspective: Effective Laboratory Certification Program Implementation
CA ELAP Expert Review Panel Meeting January 31, 2017 EPA Perspective: Effective Laboratory Certification Program Implementation Daniel P. Hautman, Deputy Director Technical Support Center Cincinnati, OH
More informationSchedule Identity Services
This document (this Schedule") is the Schedule for Services related to the identity management ( Identity Services ) made pursuant to the ehealth Ontario Services Agreement (the Agreement ) between ehealth
More informationWater Quality Association Sustainability Certification Program s Logo Policy. Version 1.0
Water Quality Association Sustainability Certification Program s Logo Policy Version 1.0 Effective Date: 7/19/2013 TABLE OF CONTENTS INTRODUCTION... 3 OWNERSHIP & REGISTRATION OF THE SUSTAINABILITY MARK...
More informationCPE Frequently Asked Questions
What are the CPE requirements in Louisiana? Each certificate holder must complete and report a minimum of 20 hours of continuing professional education (CPE) annually, and at least 80 hours of continuing
More informationAccreditation Criteria For Conformity Assessment Bodies
Page 1 of 8 Reviewed by: Getnet Tsigemalak Approved by: Araya Fesseha Position: Quality Manager Position: Director General Signature: Signature: Contents Page 1 Purpose and Scope... 2 2 References... 2
More informationIECEx Guide Guidance for Applications from Service Facilities seeking IECEx Certification
IECEx Guide Guidance for Applications from Service Facilities seeking IECEx Certification INTERNATIONAL ELECTROTECHNICAL COMMISSION SCHEME FOR CERTIFICATION TO STANDARDS RELATING TO EQUIPMENT FOR USE IN
More informationhttps://www.asme.org/shop/certification-accreditation UG-117 ASME BPVC.Vlll.1-2015 17-230 page 3 of 18 certificate will identify the Certification Designator to be used, and the type of shop and/or field
More informationSECTION A. Tempered Glass Free Standing Swing Gate Post Assemblies.
Page 1 of 5 SECTION 05 7310 CRL-BLUMCRAFT FREE STANDING GLASS SWING GATE POST SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Tempered Glass Free Standing Swing Gate Post Assemblies. 1.2 RELATED SECTIONS
More informationSpark Arrestors OCTOBER The electronic pdf version of this document found through is the officially binding version
STANDARD FOR CERTIFICATION No. 2.9 TYPE APPROVAL PROGRAMME 5-779.70-1 Spark Arrestors OCTOBER 2011 The electronic pdf version of this document found through http://www.dnv.com is the officially binding
More information