Wireless DMX Control. Show Performer DMX Controller. Stage Desk 48 DMX Controller

Transcription

1 Wireless DMX Control SRC-260 Each unit is a transmitter and receiver based on its Dip settings. Connect a DMX 512 standard controller to the SRC-260 and set another SRC-260 set in receivers mode down range and send DMX 512 wireless! channels Distance Input power Transmit and Receive Frequencies (2) 512 Channel Pass Through 150m 9V / 500MA 915/916 Hz L170 x W86 x H200mm 0.7 kg Show Performer DMX Controller SRC-232P Professional style desk controller for intelligent DMX fixtures channels SMPTE out Input 512 DC 12V, 700MA 5-pin XLR Female DB-9 RS-232 Serial PC L516 x W28 x H120mm 0.7 kg Also available without plastic rails: Part# SRC-232 Plastic Controller Rails Stage Desk 8 DMX Controller SRC-172P Controller channels chaser programs Audio input 8 96 by built-in microphone or line in 100mv-1 vpp DC 12-20V 500MA min L7 x W29 x H90mm 7.5 kg Plastic Controller Rails 37

2 52 DMX Controller SRC Patches of 12 channels each 8 programmable chases of 999 scenes each Auto, Sound active, Auto mode In auto mode, 8 chases program or 12 program are played synchronously. ously. Auto mode program controlled by speed and fade sliders, fade time or again fade time Blackout output control over program, sound, black out 16x blue LCD display LED indicator Entertainment lighting channels 512 L516 x W85 x H65mm 8.5kg 92 DMX Controller SRC fixture assignment buttons each comprising 16 channels 16 channels divided into Page A and B, each page with 8 channels 12 chase buttons, each chase can store up to 20 steps of scenes Manual, Sound Active, and Auto mode Via Auto, all fade or X/Y axes fade selectable, and speed adjustable For every scanner, Reverse and Assign available Via manual and program-editing, press Fine and the relative LED indicator flash. That is the 16 bit assign value. If not, that is the 8 bit assign value. activated Bank, Chase, Sound Active on/off, Auto on/off, and Blackout on/off. Data delivery between consoles LED digital screen display and LED indicator DMX phase switch selectable channels Power Supply Audio input 192 DC 12V, 1000MA by built-in microphone or line in, 100mv-1vpp L516 x W28 x H120mm 3.8 kg Club-2F DMX Controller SRC-15 Compact feature-packed intelligent lighting controller. Control up to 12 DMX fixtures of up to 16 channels each for a total of 192 output channels 30 banks of scene memory hold up to 20 scenes 6 programmable chase memories LED function and program display Fade and Speed control Built-in microphone for sound-active mode channels 192 DC 9V L516 x W160 x H90mm 2.5 kg Plastic Controller Rails 38

3 32 DMX Controller SRC-273P 32, AB page, chase and manual, adjustable speed, fade and dimmer channels Scenes 32 DC 9V 500mA 16 L516 x W160 x H90mm 2.5 kg Club-2J DMX Controller SRC-17P 12 Fixture Buttons of 16 channels each 30 banks of 8 programmable scenes 6 programmable chases of 20 scenes each 8 sliders for manual control of channels Assignable joystick for ease of movement Fine adjustment for joystick pan and tilt Fade time / assign fade time 8 Bit or 16 Bit Manual override button allow you to grab any fixture on the fly Built in microphone control DMX polarity selector Non-Volatile Memory Fog machine connector channels Power input Audio input 192 DC 9-12V 300ma min by built-in microphone or line in, 100mv-1vpp L516 x W160 x H90mm 2.7 kg Plastic Controller Rails Plastic Controller Rails Stage-2 DMX Controller SRC-16P Powerful 2-channel programmable controller. : 2 channels of pages of program memory holds up to 8 programs Large variety of chase functions Built-in microphone and line in for sound-active mode channels 2 DC 12V L516 x W160 x H90mm 2.1 kg Plastic Controller Rails Controller 39

4 DMX Mini Scene Setter SRC , AB page, chase and manual, adjustable speed, fade and dimmer with MB Removable Memory Card channels 32 DC 12V L282 x W130 x H60mm 1.5 kg DMX Mini Scene Setter 2 SRC-198A Compact Version of SRC-198, with MB Removable Memory Card channels 1 DC 12V L258 x W125 x H50mm 1.3 kg Club-2 DMX Controller SRC Scene Light channels channels 512 DC 12V/500MA L200 x W10 x H70mm 1.5 kg DMX 256 Controller SRC-25 2 Banks, each bank has 0 Scenes, 0 Chases, each chase has 99 Steps Sound-active Three controllers can be connected together to control 768 total channels channels DMX input/output Linking input/output 256 DC 9V 2 (1 3-pin XLR input female,1 3-pin XLR output male) 2 (1 5-pin input female,1 5-pin output male) L516 x W160 x H90mm 2.7 kg 0

5 Four Channel Strobe Controller SRC W sound activated channel strobe controller with individual fader control Control functions include auto chase, sound chase 16 pattern pro grams to sound or auto, flash, full dimmer fader for manual control Speed control Sound sensitivity knob individually fused AC outlets Controlled by SRC-10 step switch L280 x W130 x H75mm 2.1 kg Intelligent Fixture Controller SRC-232 channels SMPTE out Input 512 DC 12V, 700MA 5-pin XLR Female DB-9 RS-232 Serial PC L516 x W28 x H120mm 0.7 kg DMX Stage 6 Controller SRC built-in programs 16 user programs in, out, and thru Audio, fade, and speed controls 16-channel fade and flash button controls Digital LCD display screen Sound active via built-in microphone or line in Independent fog machine output button Mix chases channels Power Supply 16 DC 12-20V, 500MA L82 x W222 x H65mm 1 kg Controller

6 DMX Controller SRC-17R 12 fixture buttons with 16 channels each 30 banks of 8 programmable scenes 6 programmable chases of 20 scenes each 8 sliders for manual control of channels 2 assignable fine adjustment wheels for ease of movement 8 Bit or 16 Bit mode Manual override button allow you to grab any fixture on the fly Built in microphone Trigger Non-Volatile Fog machine connector channels Power input Audio input 192 DC 9-12V 300ma min by built-in microphone or line in, 100mv-1vpp L516 x W160 x H90mm 2.7 kg DMX Controller SRC scanners of 16 channels each 30 banks of 8 programmable scenes 6 programmable chases of 20 scenes each 8 sliders for manual control of channels Assignable joystick for ease of movement File dump allows data to be sent or received between two units Auto mode program controlled by speed and fade time sliders Fade time / assign fade time Reversible fixture to react in opposition to others in a chase 8 channel or 16 channel mode Fine adjustment for joystick pan and tilt Blackout master button Manual override button allow you to grab any fixture on the fly Built in microphone for music triggering control over banks, chases and blackout DMX polarity selector Power failure memory Fog machine connector channels Power input Audio input 192 DC 9-12V 300ma min by built-in microphone or line in, 100mv-1vpp L516 x W160 x H90mm 2.7 kg 2

7 DMX Controller SRC-172 Add # Fixture Buttons and similar information as similar types of controllers channels Chaser programs Audio input Stage-2 DMX Controller SRC-16 Powerful 2-channel programmable controller. 2 channels of pages of program memory holds up to 8 programs Large variety of chase functions Built-in microphone and RCA in DC 12V power supply channels 2 DC 12-20V 250MA L300 x W152 x H72mm 2.1 kg Stage-6 DMX Controller SRC-269 Linkable, Master, slave, 8 96 by built-in microphone or line in 100mv-1 vpp DC 12-20V 500MA L710 x W270 x H75mm 7.5kg DJX-6 DMX Controller SRC channel DMX dimming and relay console 8 dimming faders with 8 Bump buttons (channels 1-8) 8 Bump buttons (channels 9-16) 30 programmable banks with 99 steps 16 programmable scenes on faders 1-8 and keys 9-16 channels Programs DC 12-20V 250MA L710 x W270 x H75mm 7.5kg Controller channels 16 DC 9V 500mA L82 x W63 x Hmm 1 kg 3

8 Club-2 DMX Controller SRC Scene Banks each with 8 programmable scenes (20 Scenes) 8 Channel Faders Built-in Microphone LED display channels 192 DC 9-12V 300mA L82 x W132 x H73mm 2.5 kg DMX 32 Controller SRC , AB page, chase and manual, adjustable speed, fade and dimmer channels Scenes 32 DC 9V 500mA x W132 x H8mm 2.7 kg DJX-36 DMX Controller SRC-1 Easy-to-use DMX controller for programming up to 9 intelligent lights 36 channels with 9 projector banks of channels each Scene, program and projector LED displays 9 programs with up to 50 steps per program Fade and Speed control Built-in microphone channels 36 DC 9V L300 x W152 x H72mm 2.1 kg

9 2 Channel DMX Dimmer Pack SRC-193 Microprocessor control Separate DMX addressing for each channel 12 chase programs 1-12, DMX Hold, Analogue can be selectable in the event of DMX failure Phase correction activates linear dimming (0-100%) Control curve can be selectable from Linear/Switch/Square Analogue input Short circuit protection for each channel with integral 10A circuit breakers LCD menu system Electronic protection against over temperature Non-Volatile Analogue Input 12 10A 0~10V, 8-Pin din socket L96 x W75 x H177mm 27 kg 6 Channel DMX Dimmer Pack SRC-192 Microprocessor control Separate DMX addressing for each channel 6 Channel DMX Control 6-Channel Analog 0-10V DC Control Phase correction activates linear dimming (0-100%) Linear/Switch/Square Control Curves (Selectable) Short circuit protection for each channel with integral 10A circuit breakers LCD menu system Electronic protection against over temperature Non-Volatile Analogue Input 6 10A 0~10V, 8-Pin DIN L82 x W0 x H88mm 10 kg 6 Channel Dimmer SRC Channel Linear Dimming Channels 2200 W Max Per Channel (See Manual) 6 DMX Channels LCD Menu System 6 L70 x W1 x H100mm 0.9 kg Controller 5

10 One Channel DMX Dimmer SRC-233 One Channel Dimmer 1 5A DC 9V 500mA L190 x W80 x H65mm 1 kg Four Channel Dimmer Pack and Footswitch SRC-29 + SRC-29P Footswitch provides on/off, flash and chase functions Dimmer-X DMX SRC-167 Four channel DMX dimmer pack. Zero-crossing circuitry Stand alone chase feature Dimmer-X SRC A (SRC-29))L305 x W167 x H81mm (SRC-29P))L169 x W190 x H76mm (SRC-29) 2.7 kg (SRC-29P) 1.2 kg 8 10A L260 x W190 x H75mm 2.7 kg Four channel analog 0-10V wall or truss-mountable dimmer pack. SRC-29P SRC-29 5A L298 x W165 x H96mm 2.8 kg Dimmer- DMX SRC-152DMX Four channel dimmer pack with both DMX and Analog inputs. 16A circuit breaker Control by either one or four Auto chase and Auto parallel functions 6 5A per channel, 16A total L298 x W165 x H96mm 2.8 kg

11 DMX 20 SRC-135 Four channel dimmer pack with both DMX and Analog inputs. 2-phase input LED indicators for each channel Individual channel faders Adjustable preheat 0-50% DMX 620 SRC-13 20A per channel output L82 x W381 x H89mm 8 kg Six channel dimmer pack with both DMX and Analog inputs 3-phase input LED indicators for each channel Individual channel faders Adjustable preheat 0-50% 6 20A L82 x W381 x H89mm 8 kg -Way DMX Distributor SRC-13 Four-way DMX distributor with one input and four outputs Electrically isolated input and output Features both 3 and 5 pin connectors Independent driver, data and data display for each output DMX outtput DMX input 10(5 3-pin XLR female, 5 5-pin female) L227 x W172 x H72mm 2.8 kg -Way DMX Distributor New Version SRC Four-way DMX distributor with one input and four outputs Electrically isolated input and output Features both 3 and 5 pin connectors Independent driver, data and data display for each output DMX outtput DMX input 10(5 3-pin XLR female, 5 5-pin female) L80 x W15 x H88mm 3.5 kg Controller 7

12 2-Way DMX Distributor SRC-12 Two-way DMX distributor with one input and two outputs. Opto-isolated input and output Features both 3 and 5 pin connectors 1 In x 2 Through DMX input 2 2 (1 3-pin XLR male, 1 5-pin male) (2 3-pin XLR female, 2 5-pin female) L25 x W165 x H72mm 1.9 kg Chase-6 T-bar DMX SRC-17 Four channel DMX light stand-mountable chaser 16 built-in stand alone chase programs Pre-heat function Memory back-up Master and Channel dimming 5A L1300 x W100 x H100mm.5 kg Chase-6 T-bar MIDI SRC-17H Four channel DMX light stand-mountable chaser : 5 pin DIN 16 built-in stand alone chase programs Pre-heat function Memory back-up Master and Channel dimming 5A L1500 x W100 x H100mm 5.2 kg Chase- T-bar SRC-17S Four channel light stand-mountable chaser Stand-alone or sound-active operation Full-on, stand-by and linking functions Infrared remote 8 5A L610 x W100 x H100mm 2.6 kg

13 Chase-2 Multi SRC-136P Four channel multi-function chasing power pack 2 built-in chase programs Full-on, Stand-by, Fade time and Tap Sync functions Sound active through built-in microphone or line in and RCA input Mode Chase-6 SRC-128 5A Hold Dim / Hold Sound / Prog. Sound/ Prog. Speed / Auto Speed / Auto Sound / Memory L82 x W132 x H127mm.5 kg 16 chase patterns Terminal block or IEC sockets Zero-Crossing, inductive or resistive load, with opto-isolation Mode 5A Sound, Auto, Manual, Full-on stand-by L82 x W50 x Hmm 1.9 kg Chase-5K SRC-123 The Chase-K is designed for pin spots, small effects, strobes and par cans, and features selectable chase positions, each with multiple patterns. 115V unit with U-ground connectors 230V unit with IEC connectors Sound-active with adjustable audio sensitivity Speed control 10A L60 x W20 x H100mm kg Controller Chase Pack C SRC-105C 16 Auto Chase patterns Built-in microphone with adjustable audio sensitivity 550W L278 x W22 x H108mm(110V) L238 x W22 x H108mm(220V) 2.1 kg (110V) 1.8 kg (220V) 9

14 Chase Pack SRC Auto Chase patterns Built-in microphone with adjustable audio sensitivity 600W AC 120V 50Hz only L200 x W165 x H125mm 1.5 kg Strobe Sync DMX SRC-168 DMX interface for strobe models SRL-58, SRL-563, SRL-565, SRL-570, SRL-562, and SRL-523. Strobe Sync 32 SRC-108X 1 L195 x W90 x H5mm 0.8 kg Eight channel switch panel with front-mounted resetable circuit breaker (15A for 125V, 10A for 250V) and a variety of rear panel connection options. 8 AC 120V (SRC-106) or 20V (SRC-11) L82 x W110 x H50mm 2.5 kg Strobe Sync 8 SRC-103 Control up to 8 strobes in a series connection. Suitable for strobe models SRL-58, SRL-563, SRL-565, SRL-570, SRL-562, and SRL-523. L130 x W65 x H150mm 1 kg DMX Status Lights SRC-18 LED indicators for each channel Variety of rear panel connector options 12 5A L80 x W15 x H88mm 3.5 kg 50

15 PDPL-8LED SRC-129 Features a linear LED voltage meter plus true power surge protection, master power switch, 8 three-prong outlets on the rear of the unit, 15A resetable circuit breaker, and 2 pullout light tubes with dimmer control. On/off switch for light tube dimmer 115V unit with U-ground connectors 230V unit with IEC connectors Maximum load is 1800W L83 x W70 x H229mm 3 kg PDPL-8 SRC-119 Same Features as PDP-8LED, but without LED voltage meter display Maximum power load 1800W(120V), 2200W(20V) L83 x W70 x H229mm 3 kg Power Distribution SRC-129A On/Off switch for light tube dimmer 8 buttons for the SRC-176P 360 revolvable light tube 115V unit with U-ground connectors 230V unit with IEC connectors PDP- SRC-12 L83 x W70 x H229mm 3 kg illuminated rocker switches 115V unit with U-ground connectors 230V unit with IEC connectors three-prong outlets on the rear of the unit and a 15A resetable circuit breaker Maximum power load 15A /1700W L22 x W x H90mm 0.9 kg Controller 5

16 PC-88 SRC The PC-188 controller + power pack features a master power switch, 1 unswitched AC channel, and 8 channels with 8 latch switches and 8 flash buttons. Up to 3 power packs can be used with each controller 25 foot control cable included. 115V unit with U-ground connectors 230V unit with IEC connectors Switch-0 SRC L83 x W102 x H89mm (Controller) L368 x W57 x H57mm (Power Pack) kg Ten channel switch panel with individual channel fuses and a variety of rear panel connection options. Channel output Foot Switch SRC-10 For use with SRC-105 Chase Pack 3 functions A per channel, 20A total L82 x W110 x H50mm 2.5 kg All On, All Off, Chase 52