ETC Quick Guide. Source Four LED Profile
|
|
|
- Augustus Gilmore
- 5 years ago
- Views:
Transcription
1 ETC Quick Guide Source Four LED Profile Overview For complete information and step-by-step instructions, see Source Four LED Profile v1.3.0 User Manual. Yoke Safety cable loop Yoke locking knob Accessory retainer Accessory holder Keypad LCD Power Thru Status indicators DMX Thru Power In DMX In Up Back Home Light Bulb Enter Down Power Indicates AC power is On. DMX Indicates control signal is Active. Error Indicates data error, high temperature, or other unusual status. Corporate Headquarters 3031 Pleasant View Road, P.O. Box , Middleton, Wisconsin USA Tel Fax London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0) Fax +44 (0) Rome, IT Via Pieve Torina, 48, Rome, Italy Tel +39 (06) Fax +44 (0) Holzkirchen, DE Ohmstrasse 3, Holzkirchen, Germany Tel +49 (80 24) Fax +49 (80 24) Hong Kong Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel Fax Service: (Americas) service@etcconnect.com (UK) service@etceurope.com (DE) techserv-hoki@etcconnect.com (Asia) service@etcasia.com Web: Copyright 2012 ETC. All Rights Reserved. Product information and specifications subject to change. 7460M Rev B Released ETC intends this document to be provided in its entirety. US and international patents pending Source Four LED Profile v1.3.0 Quick Guide Page 1 of 7 Electronic Theatre Controls, Inc.
2 Install Lens Tube Install Lens Tube Install Fixture Slide lens tube into shutter barrel. Install the lens zoom knob. Install the Phillips screw in the top of the lens barrel. General use position Low clearance position Hang or mount the fixture. Attach safety cable. Insert additional accessories such as a top hat, etc. WARNING: Use only hardware rated for total weight of fixture and accessories. A safety cable (or other approved safety device) must be securely attached to the safety cable loop before loosening the clamp. Source Four LED Profile v1.3.0 Quick Guide Page 2 of 7 Electronic Theatre Controls, Inc.
3 Connect Connect Power Thru DMX Thru Power In DMX In Step 4: Step 5: Attach power cable to Power In. Attach 5-pin XLR cable to DMX In (if using external control). Connect power cable to AC power. Plug XLR cable (if using) into data source. Link additional fixtures via Power Thru and DMX Thru connectors. WARNING: No more than nine Source Four LED fixtures per circuit (non-dimming, 100 to 240 VAC, 50/60 Hz) Up to 32 device loads on the DMX daisy-chain. Disconnect Power and DMX before all cleaning and maintenance. Focus Step 4: Step 5: Supply power and wait for the fixture to boot up. Press [Light Bulb] to open Presets & Sequences. Select Focus and press [Enter] to turn on LED array. Adjust fixture's position. Once focus is set, press [Enter] to turn off LED array and then [Home] to return to home screen. Source Four LED Profile v1.3.0 Quick Guide Page 3 of 7 Electronic Theatre Controls, Inc.
4 Soft Focus Diffuser Soft Focus Diffuser Address Install the diffuser into an A-Sized Pattern holder. Install a pattern in front of the diffuser, if needed. Insert the pattern holder and diffuser into the Pattern holder slot, making sure the writing on the diffuser faces the front of the fixture. From the home screen, press [Enter] to open Main Menu. On the Main Menu, scroll to DMX Start Address, press [Enter]. Use [Up] or [Down] to scroll to desired address. Step 4: Press [Enter] to select address number. Step 5: Press [Home] to return to home screen. * DMX address is not needed if using standalone or master/slave control. Features Quick Setup On the Main Menu, scroll to Quick Setups. Press [Enter]. Scroll to the desired setup and then press [Enter]. An asterisk (*) indicates which setup is active. Step 4: Press [Home] to return to the home screen. The top line of the home screen displays the name of the active setup. Individual features and settings are adjustable under the Advanced menu. Consult the User Manual for more information on advanced features of Source Four LED fixtures. Source Four LED Profile v1.3.0 Quick Guide Page 4 of 7 Electronic Theatre Controls, Inc.
5 Quick Setups Quick Setups Lustr+ Quick Setup Features Recommended For: General Smooth dimming, good consistency, direct color control, simple operation. General lighting, rentals. Stage Tungsten-like dimming, HSI color control with Plus-7 fine tuning, fast color mixing and consistency, console output snapshot to record stand alone presets. Theatrical lighting. XT Arch High Impact Studio Maximum consistency in extreme applications, reduced brightness. Maximum brightness, quick response, RGB color control, reduced consistency. Three-point control White Point (CCT), Intensity and Tint, DMX, or standalone operation. High-temperature environments, installations with limited access. Video-based control, effects lighting, concerts. Video and film lighting, white light-only applications. Parameter General Stage XT Arch High Impact Studio DMX Settings Profile Direct HSI HSI RGB Studio Strobe Enabled Enabled Enabled Enabled Enabled Data Loss Setting Instant Instant HLL-4ever Instant N/A Plus Seven N/A Enabled Disabled Disabled Disabled Fan Control DMX DMX DMX DMX DMX LED Settings Output Setting Regulated Regulated Protected Boost Regulated Dimming Curve Standard Incandescent Standard Quick Linear Red Shift N/A Disabled Disabled Disabled N/A White Point N/A N/A Local Settings Status Indicators On On On On On Overtemp Dark Dark Visible Dark Visible Source Four LED Profile v1.3.0 Quick Guide Page 5 of 7 Electronic Theatre Controls, Inc.
6 Quick Setups Tungsten and Daylight Quick Setup Features Recommended For: Studio Stage Single Channel Linear dimming, simple standalone operation via the UI. Tungsten-like dimming, stage-friendly settings, DMX fan control. Standard dimming, automatic fan, only 1 DMX channel. Video or film lighting, installations without DMX control. Theatrical lighting, installations mixed with tungsten. Architectural applications with streamlined control. Parameter Studio Stage Single Channel DMX Settings Profile Intensity Intensity Intensity Strobe Enabled Enabled Disabled Data Loss Setting N/A Instant Instant Fan Control DMX DMX Automatic LED Settings Output Setting Regulated Regulated Regulated Dimming Curve Linear Incandescent Standard Local Settings Status Indicators On On On Overtemp Visible Dark Dark Source Four LED Profile v1.3.0 Quick Guide Page 6 of 7 Electronic Theatre Controls, Inc.
7 DMX Profiles DMX Profiles Tungsten and Daylight Channel Control 1 Intensity 2 Strobe * Lustr+ 3 Fan control * Channel HSI HSIC RGB Studio Direct 1 Hue Hue Red Intensity Color 1 2 Hue fine Hue fine Green Color temp Color 2 3 Saturation Saturation Blue Tint Color 3 4 Intensity Intensity N/A N/A Color 4 5 Strobe* Strobe* Strobe* Strobe* Color 5 6 Fan control * Fan control * Fan control * Fan control * Color 6 7 N/A Color temp N/A N/A Color 7 8 Plus7 on/off * Plus7 on/off * Plus7 on/off * Plus7 on/off * Intensity 9 Plus7 - (1) * Plus7 - (1) * Plus7 - (1) * Plus7 - (1) * Strobe * 10 Plus7 - (2) * Plus7 - (2) * Plus7 - (2) * Plus7 - (2) * Fan control * 11 Plus7 - (3) * Plus7 - (3) * Plus7 - (3) * Plus7 - (3) * N/A 12 Plus7 - (4) * Plus7 - (4) * Plus7 - (4) * Plus7 - (4) * N/A 13 Plus7 - (5) * Plus7 - (5) * Plus7 - (5) * Plus7 - (5) * N/A 14 Plus7 - (6) * Plus7 - (6) * Plus7 - (6) * Plus7 - (6) * N/A 15 Plus7 - (7) * Plus7 - (7) * Plus7 - (7) * Plus7 - (7) * N/A * When this feature is enabled. Typical Power Consumption Lustr+ Daylight Tungsten 90V 120V 240V Idle Power / Current 4.27W / 0.084A 4.38W / 0.079A 4.2W / 0.068A 100% Boost Power / Current 130.8W / 1.48A 129.9W / 1.11A 126.4W / 0.576A 90V 120V 240V Idle Power / Current 4.3W / 0.083A 4.35W / 0.077A 4.04W / 0.066A 100% Boost Power / Current 165.2W / 1.87A 163.3W / 1.39A 160.3W / 0.718A 100V 120V 240V Idle Power / Current 4.3W / 0.085A 4.35W / 0.078A 4.0W / 0.065A 100% Boost Power / Current 159.8W / 1.81A 157.4W / 1.35A 154.8W / 0.695A Source Four LED Profile v1.3.0 Quick Guide Page 7 of 7 Electronic Theatre Controls, Inc.
ETC Desire Quick Guide
ETC Desire Quick Guide D22, D40, D40XT, D60 Overview For complete information and step-by-step instructions, see Desire Series by ETC D22, D40, D40XT, D60 User Manual. ETC documentation can be downloaded
ETC Desire Quick Guide
D40, D40XT, D60 Overview For complete information and step-by-step instructions, see Desire Series by ETC D40, D40XT, D60 User Manual. Yoke Safety cable loop Yoke locking knob Accessory retainer Accessory
Loosen these screws 2 full turns Step 4: Carefully flip over the console and loosen the 3 screws in blue below: NOTE: DO NOT remove the 3 screws.
ETC Service Note Tools Required: Procedure: Step 1: Step 2: Step 3: #2 Phillips Screwdriver #1 Phillips Screwdriver Side Cutter 4 Replacement zip ties Remove the protective side panels from the Congo jr
ETC Installation Guide
ETC Installation Guide Desire Series D22 Introduction ETC s Desire D22 is designed for indoor installations and has a rugged die-cast enclosure, steel mounting yoke, and noise-free, fan-less operation.
ETC Installation Manual
ColorSource Spot Overview The is an affordable profile fixture that offers the quality and support of an ETC LED fixture. Utilizing an RGB-L color mixing system, the produces amazing color and output for
User Manual. Revision B
User Manual TM Revision B Copyright 2014 Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part Number: 7063M1220 Rev B Released: 2014-07
User Manual. v Rev C. LED fixtures are intended for professional use only. Read this entire document before using this product.
User Manual v1.8.0 Rev C LED fixtures are intended for professional use only. Read this entire document before using this product. Copyright 2016 Electronic Theatre Controls, Inc. All rights reserved.
ETC. Source 4WRD LED. White-Light LED Retrofit GENERAL INFORMATION ORDERING INFORMATION. Source 4WRD
GENERAL INFORMATION Source 4WRD (Watt Reduction Device) LED is a replacement for a standard Source Four burner assembly that will convert the HPL source to a white-light LED and provides a significant
ETC. ColorSource CYC. ColorSource Series GENERAL INFORMATION ORDERING INFORMATION. ColorSource CYC Adapter
100V 115/120V ColorSource CYC GENERAL INFORMATION The ColorSource CYC is a dedicated cyclorama fixture designed with the sole purpose of creating beautiful, smooth washes of light on a cyclorama or wall.
Source Four Mini LED Gallery: 90+ CRI ETC. 4M Series. General information. Additional Ordering Information
General information The Source Four Mini LED can go where no full-sized Source Four has gone before. ETC s 12W Source Four Mini LED features the same crisp optics, user-friendly functionality and sleek
ETC Installation Guide
ColorSource PAR v1.7 Overview The ColorSource PAR is an affordable LED fixture that uses the RGB-L (red, green, blue, and lime) color system to provide a rich, bright light. The ColorSource PAR is available
Source Four Mini LED ETC. 4M Series ORDERING INFORMATION GENERAL INFORMATION. Additional Ordering Information. Source Four Mini LED
GENERAL INFORMATION The Source Four Mini LED can go where no full-sized Source Four has gone before. ETC s 12W Source Four Mini LED features the same crisp optics, user-friendly functionality and sleek
ETC Installation Guide
Overview Echo preset stations are used to activate built-in presets in compatible power control products. Stations mount using a standard singlegang back box (RACO 690 or equivalent), or an optional surface
Source Four CE Mini ETC. Source Four Mini Series GENERAL INFORMATION ORDERING INFORMATION
GENERAL INFORMATION The Source Four CE Mini can go where no full-sized Source Four has gone before. ETC s 12V 50 watt Source Four Mini features the same crisp optics, user-friendly functionality and sleek
Source Four CE Mini ETC. Source Four Mini Series GENERAL INFORMATION ORDERING INFORMATION. Source Four CE Mini Luminaire (Body only)
GENERAL INFORMATION The tungsten luminaire can go where no fullsized Source Four has gone before. ETC s 12V 50 watt Source Four Mini features the same crisp optics, user-friendly functionality and sleek
Source Four Mini ETC. 4M Series GENERAL INFORMATION ORDERING INFORMATION. Additional Ordering Information. Source Four Mini
GENERAL INFORMATION The Source Four Mini can go where no full-sized Source Four has gone before. ETC s 50-watt Source Four Mini features the same crisp optics, user-friendly functionality and sleek look
Desire Series by ETC D22, D40, D40XT, D60 User Manual
Desire Series by ETC D22, D40, D40XT, D60 User Manual v1.7 Rev A The Desire series of fixtures are intended for professional use only. Read entire User Manual before using equipment. Copyright 2014 Electronic
PRELIMINARY. Source Four Mini ETC. 4M Series. General information. Ordering information. Additional Ordering Information
General information The Source Four Mini can go where no full-sized Source Four has gone before. ETC s 50-watt Source Four Mini features the same crisp optics, user-friendly functionality and sleek look
ETC. Source Four jr Zoom. Ellipsoidal Series. Source Four jr Zoom. Connector Designation
S P E C I F I C A T I O N s PHYSICAL Rugged die cast aluminum construction 20 gauge stainless steel shutters in a bi-plane assembly High impact, thermally insulated knobs and shutter handles Two accessory
Loaner Unison CMEd Installation Instructions
ETC Quick Guide Please follow these instructions in order to swap out your existing processor with a loaner. Please keep the box and its packing materials to use when sending your original processor back
ETC. Source Four Zoom Ellipsoidal Series. Source Four Zoom. Connector Designation
Source Four Zoom 25-50 50 45 38 30 S p e c i f i c a t i o n s PHSICAL Rugged, die cast and extruded aluminium construction Patented one-handed focus mechanism with positive lock Rotating shutter assembly
User Manual. Production Dates: September Present
User Manual Production Dates: September 2004 - Present Copyright 2008 Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part Number: 7061M1250-06.01
ETC. ColorSource Spot Pearl. ColorSource Series GENERAL INFORMATION ORDERING INFORMATION
100V 115/120V GENERAL INFORMATION ColorSource Spot Pearl is a variable white-light LED array that utilizes a mix of two different white LEDs that enable a user to set the color temperature anywhere between
Source Four XT HID Zoom and User Manual
Source Four XT HID Zoom 15-30 and 25-50 User Manual Production Dates: May 2013 - Present Copyright 2013. Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject
Weight - 400g (14 oz.) includes antenna. Connections - Integral USB connector to console or RPU. Ethernet. Weight - 380g (13 oz.) includes antenna.
ETC Setup Guide Overview The (RFR) provides an advanced, wireless solution for remote control. Compatible with ETC Congo, Congo jr, Eos, and Ion consoles, this unit provides remote access to frequently
User Manual. Version 3.0.1
User Manual Version 3.0.1 Copyright 2011. Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part Number: 7219M1220-3.0.1 Rev A Released: 2011-10
Source Four 150W HID Zoom 25-50
S P E C I F I C A T I O N S PHSICAL oke mounted electronic ballast Rugged, die cast and extruded aluminum construction Patented one-handed focus mechanism with positive lock Rotating shutter assembly ±25
Source Four Zoom 15-30
24 21 27 18 15 SPECIFICATIONS PHSICAL Rugged die cast and extruded aluminum construction Patented one-handed focus mechanism with positive lock Rotating shutter assembly ±25 20 gauge stainless steel shutters
Source Four 70W HID jr Zoom
S P E C I F I C A T I O N s PHSICAL Rugged die cast aluminum construction 20 gauge stainless steel shutters in a bi-plane assembly High impact, thermally insulated knobs and shutter handles Two accessory
Irideon FPZ. User Manual. Rev A
Irideon FPZ User Manual Rev A Copyright 2016 Electronic Theatre Controls, Inc. All rights reserved. Product information and specifications subject to change. Part Number: 7191M1200-1.0.0 Rev: A Released:
User Manual. Version 2.0
User Manual Version 2.0 Copyright 2008. Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part Number: 7219M1220-2.0.0 Rev A Released: November
Push button to adjust displays. LCD Touchscreen Power Button. keypad Keyboard Tray
Supplement to Operations Manual Overview This document will discuss specific hardware and software features. For additional information on using the console, please see the Eos v2.0 Operations Manual and
Installation and User Manual
HPL to LED Retrofit Installation and User Manual revision D v 1.0 LED fixtures are intended for professional use only. Read this entire document before using this product. Copyright 2016 Electronic Theatre
ETC Configuration Guide
ETC Configuration Guide Overview The Paradigm ACP can be controlled through its local RS232 serial port and Ethernet interface using a default command structure referred to as the. All aspects of serial
Eos Family v2.2 Supplement to Operations Manual
ETC Supplement Eos Family v2.2 Supplement to Operations Manual The following information is new for version 2.2.0. This document is supplemental to and should be used in conjunction with information in
ETC Setup Guide Universal Fader Wing Installation
Universal Fader Wing Installation Introduction The Universal Fader Wings are peripheral devices that can expand the functionality of your ETC Eos, Eos Ti, Gio, Gio @5, Ion Xe, Ion, Cobalt, Congo, or Congo
PAR Series SPECIFICATIONS. Source Four PAR EA. Connector Designation Use Suffixes below to specify Factory Fitted Connector type
SPECIFICATIONS PHSICAL Rugged die-cast aluminum construction Tool free access to the reflector and lens High-impact, thermally insulated knobs Sealed reflector housing Reflector temperature control through
PAR Series SPECIFICATIONS. Source Four PAR MCM. Connector Designation Use Suffixes below to specify Factory Fitted Connector type
SPECIFICATIONS PHSICAL Rugged die cast aluminum construction Tool free access to the reflector and lens High impact, thermally insulated knobs Sealed reflector housing Reflector temperature control through
ETC Installation Guide
Unison Foundry Overview The Unison Foundry provides fully-rated 20A relays for switched power control with 0 10V dimming for compatible fluorescent ballasts and LED drivers. The provides two outputs of
Eos Family v Supplement to Operations Manual
ETC Supplement Eos Family v1.9.11 Supplement to Operations Manual The following information is new for version 1.9.11. This document is supplemental to information in the Eos v1.7 Operations Manual, Ion
Zone and Room Controllers
Zone and Room Controllers Echo Room Controllers respond to Echo Control Stations and provide relay or dimming functions for their local zones. Panels allow for the separation of circuits into multiple
SmartBar & SmartModule User Manual
SmartBar & SmartModule User Manual Version 1.67 C Copyright 2009. Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part Number: 7521M1200-1.67
Assembly Guide. Production Dates: September Present
Assembly Guide Production Dates: September 2004 - Present Copyright Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part : 7062M2500-05.04
USB Type A. Connector. USB Type B. Power Input. Connector
Eos Programming Wing For information about the Cobalt Programming Wing, see page 3, and for the Cobalt Motor Fader Wing, see page 5. This section outlines the setup of your Eos Programming Wing. For additional
CE User Manual. Production Dates: September Present
CE User Manual Production Dates: September 2004 - Present Copyright 2008 Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part Number: 7060M1210-06.01
Source Four PARNel. Assembly Guide
Source Four PARNel Assembly Guide Table of Contents Final Assembly... 3 Lamp Burner Assembly... 4-5 Housing Assembly... 6-7 Installing a stippled/wave lens... 7 Positioning the stippled/wave lens... 7
ETC Installation Guide
Unison Echo Inspire Station Overview Inspire stations provide preset, zone, and space combine controls for use with Unison Echo and Sensor control systems. Reference the ETC website at www.etcconnect.com
TechnicalBrochure T Studio ReflectionSeries
echnicalbrochure T Studio Reflection LEDko T Studio KEY FEATURES CRI 9, ideal for broadcast segment Light source: W Tungsten LEDs Soft profiling thanks to Fresnel and PC optics (Coemar patent) Smooth bit
Wall Mount, UL Installation Manual
Wall Mount, UL Installation Manual Revision E Copyright 2014 Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part Number: 7021M2120-EN Rev
SmartBar and SmartModule User Manual. Version 1.40
SmartBar and SmartModule User Manual Version 1.40 Copyright Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part Number: 7521M1200-1.40
TechnicalBrochure DIM ReflectionSeries
echnicalbrochure DIM Reflection LEDko DIM Tungsten or Daylight KEY FEATURES Light source: W Tungsten or Daylight LEDs Powered directly through standard Power Dimming Units Superior flat field optics Fixed
TechnicalBrochure T - CRI 90 ReflectionSeries
echnicalbrochure T - CRI 9 Reflection LEDko T CRI 9 KEY FEATURES CRI 9 Light source: W Tungsten LEDs Soft profiling thanks to Fresnel and PC optics (Coemar patent) Smooth bit dimmer Guaranteed Flicker-free
Unison Echo Room Controller
Unison Echo Room Controller Installation and User Operation Manual Version 2.0 Copyright 2016 Electronic Theatre Controls, Inc. All rights reserved. Product information and specifications subject to change.
SmartBar & SmartModule CE User Manual. Version 1.42
SmartBar & SmartModule CE User Manual Version 1.42 Copyright Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part Number: 7521M1200-1.42-GB
CueSystem User Guide. PC Application Version 4.0 and later Firmware Version 4.0 and later. Part Number: 7493M Rev: A Released:
CueSystem User Guide PC Application Version 4.0 and later Firmware Version 4.0 and later Part Number: 7493M1200-4.0 Rev: A Released: 2017-01 ETC is a registered trademark of Electronic Theatre Controls,
ZEP - 641SXCW 640SX - LED 150 W. Profile spot. Type: Profile spot Source: LED 150 W Optics: 11 to 26 zoom Colour temperature: Cool White.
f ZEP - 641SXCW 640SX - LED 150 W Type: Profile spot Source: LED 150 W Optics: 11 to 26 zoom Colour temperature: Cool White Profile spot The new powerful LED profile An evolution of the award-winning 85
TechnicalBrochure D - CRI 90 ReflectionSeries
echnicalbrochure D - CRI 9 eflection LEDko D CRI 9 KEY FEATURES CRI 9 Light source: W Daylight LEDs Soft profiling thanks to Fresnel and PC optics (Coemar patent) Smooth bit dimmer Guaranteed Flicker-free
ETC. Source Four XT HID Zoom W. HID Exterior Series ORDERING INFORMATION GENERAL INFORMATION. Source Four XT HID Zoom W FEATURES
Source Four T HID Zoom 15-30 150W GENERAL INFORMATION ETC s Source Four T HID is a Source Four spotlight for all-weather use. Powerful Source Four optics, light output and energy savings in a sleek IP66-rated
ReNEW LED Retrofit Assembly QUICK START GUIDE
ReNEW LED Retrofit Assembly QUICK START GUIDE This document provides installation and setup procedures for the PRG ReNEW LED Retrofit Assembly. For complete operating instructions, refer to the ReNEW LED
ColorSource ThruPower
ColorSource ThruPower Installation Manual rev B This product is intended for professional use only. Read this entire document before using this product. Copyright 2016 Electronic Theatre Controls, Inc
Type: Source: Optics: Profile spot Colour temperature: Features Optical Multi-function double gate: Very long-life lamp source: Shutter gate:
f ZEP - 663SX CW 660SX - LED 300 W Type: Profile spot Source: LED 300 W Optics: 28 to 54 zoom Colour temperature: Cool White Profile spot Enhanced performance for the new ZEP member! Combining power with
VBAR 270. User Manual. Version 1.2
VBAR 270 User Manual Version 1.2 VBAR 270 User Manual Page 1of 19 Introduction Thank you for purchasing VBAR 270. VBAR 270 is a LED light fixture for professional use. Using the RGB color mixing technology
PHX 250W LED PROFILE SPOT 250 Watt LED
PHX 250W LED PROFILE SPOT 250 Watt LED The 5, 10, 19, 26, 36 and 50 fixed focus PHX LED ellipsoidals are state of the art luminaires in function, style, and efficiency. These ellipsoidals have been designed
V2 LED SOFTLIGHT USER GUIDE
with On-Board Controls v2.0 V2 LED SOFTLIGHT USER GUIDE X2 Panel 2X2 Panel Pro-Panel LED User Guide TABLE OF CONTENTS What s in the Box... 2 Features... 3 Cautions & Warnings... 3 Operations, Storage &
ZEP - 644SXCW 640SX - LED 150 W. Profile spot. Type: Profile spot Source: LED 150 W Optics: 16 to 35 zoom Colour temperature: Cool White
f ZEP - 644SXCW 640SX - LED 150 W Type: Profile spot Source: LED 150 W Optics: 16 to 35 zoom Colour temperature: Cool White Profile spot The new powerful LED profile An evolution of the award-winning 85
ZEP - 664SX WW 660SX - LED 300 W. Profile spot. Type: Profile spot Source: LED 300 W Optics: 16 to 35 zoom Colour temperature: Warm white
f ZEP - 664SX WW 660SX - LED 300 W Type: Profile spot Source: LED 300 W Optics: 16 to 35 zoom Colour temperature: Warm white Profile spot Enhanced performance for the new ZEP member! Combining power with
ETC Setup Guide arfr/ irfr for Eos Family Consoles
Overview The arfr/irfr application is for remote control of Eos Family consoles via an Android or iphone/ipad device. arfr/irfr requires that your lighting console be on a wireless network using a wireless
Spikie. Light source 60W RGBW LED. LIGHT OUTPUT 920 lm, m. Zoom range Effects Flower Effect, Colour Rainbow Effect, 3 Facet Prism
Spikie Spikie, a small, super fast LED WashBeam, which utilises a single 60W RGBW light source with a specially designed 110mm wide front lens producing a solid beam. The fixture quickly zooms from a soft
Operation Manual. Celeb 400Q DMX LED
Operation Manual Celeb 400Q DMX LED Part No. 3100077 Rev A 03-11-2014 Celeb 400Q DMX LED Fixtures CEL-400Q-120U Celeb 400Q DMX Yoke Mount, Univ 120U CEL-400Q-230U Celeb 400Q DMX Yoke Mount, Univ 230U CEL-400QP-120U
Operation Manual. Celeb 400 DMX LED
Operation Manual Celeb 400 DMX LED Part No. 3100072 Rev A 01-31-2014 Celeb 400 DMX LED Fixtures Celeb 400 Center Mount CEL-400C-120U Celeb 400 DMX Center Mount, Univ 120U CEL-400C-230U Celeb 400 DMX Center
Source Four XT HID Zoom 150W
Source Four T HID Zoom 150W GENERAL INFORMATION ETC s Source Four T HID is a Source Four spotlight for all-weather use. Powerful Source Four optics, crisp light output and energy savings in a sleek IP66-rated
BRAQ CUBE USER S MANUAL
BRAQ CUBE USER S MANUAL Table of Contents Your Braq Cube Product Description... 5 What s In the Box... 7 Braq Cube Interface... 8 Braq Cube Series Braq Cube 4C... 9 Braq Cube WNC... 10 Braq Cube Modes
STUDIO LED X SERIES. The New Generation. The New Revolution.
STUDIO LED X SERIES The New Generation. The New Revolution. QUARTZCOLOR introduces STUDIO LED X SERIES, a high performing professional LED Fresnel spotlight range for the television and the lighting industry.
SL BEAM 300 FX LED Luminaire
SL BEAM 3 FX LED Luminaire Showline Offices Showline - Dallas 11 Petal Street Dallas, TX 75238 Tel: 214-647-788 Fax: 214-647-83 Showline - Europe Marssteden 152 Enschede 7547 TD The Netherlands Tel: +31
A double yoke enables the fixture to be operated in several positions.
Page 1 of 6 FEATURES AND SPECIFICATIONS LEDS: 60 Three Watt LEDs (RGBAW) Beam angle: 25 º Control system: -512 + Stand Alone channels: 4, 5, or 9 connectors: 3 pin XLR Voltage: 100-250 VAC, 50/60Hz Max
DarkFX Spot 670 User Manual English
DarkFX Spot 670 User Manual English 2016 Antari Lighting and Effects Ltd. 2 User Manual English Safety Information Please read the following safety information carefully before operating the fixture. Information
Sensor3 CEM3. User Manual. Version Part Number: 7140M Rev: A Released:
Sensor3 CEM3 User Manual Version 1.6.1 Part Number: 7140M1200-1.6.1 Rev: A Released: 2017-08 ETC and Sensor are either registered trademarks or trademarks of Electronic Theatre Controls, Inc. in the United
TABLE OF CONTENTS 1. Safety Instructions 2. Technical Specifications 3. Installation 4. How to Connect the Fixture 5. DMX512 Connections 6.
TABLE OF CONTENTS 1. Safety Instructions 2. Technical Specifications 3. Installation 4. How to Connect the Fixture 5. DMX512 Connections 6. How to Set the Unit 7. DMX Configuration 8. IR Remote Control
Operation Manual. Diva-Lite 20/30 LED
Operation Manual Diva-Lite 20/30 LED Part No. 3100089 Rev C 07-26-2017 Diva-Lite LED DMX System DIV-L20X-120U Diva-Lite 20 LED DMX, Univ 120U DIV-L20X-230U Diva-Lite 20 LED DMX, Univ 230U DIV-L30X-120U
K9 Lights USER MANUAL
K9 Lights www.k9lights.com USER MANUAL K9 Lights www.k9lights.com Index Introduction... 1 Safety Instructions... 1 Fixture Diagram... 2 Features... 3 DMX Control... 3 Display... 6 Menu... 6 Connecting
LED SPIDER MOVING HEAD LIGHT
LED SPIDER MOVING HEAD LIGHT MJ-1031C (4IN1) INSTRUCTION MANUAL Thank you for choosing our LED spider moving head light. For the sake of your safety, Please read and follow these instructions carefully
Quick Reference Guide
Ilumipod 42 IP Series Quick Reference Guide About this Guide Disclaimer The Ilumipod 42 IP Series Quick Reference Guide (QRG) only contains the product s connection and mounting information as well as
ETC Release Note. Cobalt Lighting Control System. Engineering Change Master (ECM): Effective Date: Purpose.
ETC Release Note Cobalt Lighting Control System Software Product Line: Description: Cobalt Lighting Control System Version 7.1.1 software Engineering Change Master (ECM): 500012952 Effective Date: 2014-10-10
Operation Manual. Imara S100 & S60 DMX. Imara S100 DMX Yoke Mount. Imara S100 DMX Pole-Op
Operation Manual Imara S100 & S60 DMX Imara S100 DMX Yoke Mount Imara S100 DMX Pole-Op Part No. 3100083 Rev A 03-02-2015 Imara DMX Yoke Mount Imara Fixtures IMR-S100-120U Imara S100 DMX Yoke Mount, Univ
TB-1230 QW. User Manual Please read the instruc on carefully before use
TB-1230 QW User Manual Please read the instruc on carefully before use CONTENTS 1. Safety Instructions... 2 2. Technical Specifications... 3 3. How To Set The Unit... 4 3.1 Control panel... 4 3.2 Main
SUPER LEDF10HP DATASHEET
DATASHEET LED Fresnel Spotlight 330W - CRI>95 White light, either Tungsten or Daylight balanced OVERVIEW The Super LED F10HP is a high efficiency Fresnel lens spotlight using the innovative High Power
DL7S Profile. Light source 800 W 7 colours LED engine. Light output lm. Zoom range 7-43
DL7S Profile The DL7S Profile is the first DL range fixture to receive a powerful new 800W version of the LED engine with seven colours for unprecedented smooth, stable and even colour mixing and a very
SL BEAM 500 FX LED LUMINAIRE
SL BEAM 5 FX LED LUMINAIRE Showline Offices Showline - Dallas 1911 Petal Street Dallas, TX 75238 Tel: 214-647-788 Fax: 214-647-83 Showline - Europe Marssteden 152 Enschede 7547 TD The Netherlands Tel:
USER S MANUAL
612720 USER S MANUAL Introduction Thank you for purchasing this stage light from Monoprice! This light features an aluminum shell and 177 RGB LEDs. Each color can be independently dimmed, faded, and mixed.
LED Colour Flood 10W / 30W RGB LED floodlight. user manual
LED Colour Flood 10W / 30W RGB LED floodlight user manual Musikhaus Thomann e.k. Treppendorf 30 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de
MIRO CUBE DESIGNED BY THE BLACK TANK
MIRO CUBE DESIGNED BY THE BLACK TANK USER S MANUAL Table of Contents Your MIRO CUBE Product Description... 5 What s In the Box... 7 MIRO CUBE Interface... 8 MIRO CUBE Series MIRO CUBE 4C... 10 MIRO CUBE
SUPER LEDF6 DATASHEET
SUPER DATASHEET LED Fresnel Spotlight 120W - CRI>96 White light, either Tungsten or Daylight balanced OVERVIEW The Super LED F6 is a high efficiency Fresnel lens spotlight using the innovative High Power
Quick Reference Guide
Quick Reference Guide About This Guide Disclaimer Safety Notes What Is Included The Colorado Zoom Tour WW Quick Reference Guide (QRG) only contains the product s connection and mounting information, as
RGBW 3x4 Brick & 10x4 Batten USER MANUAL
RGBW 3x4 Brick & 10x4 Batten USER MANUAL TABLE OF CONTENTS 1. INTRODUCTION... 3 PRODUCT OVERVIEW... 3 WHAT IS INCLUDED... 3 AVAILABLE OPTIONS... 3 UNPACKING INSTRUCTIONS... 3 POWER REQUIREMENTS... 3 FREQUENCY
711SX2. 700SX2-2000/2500 W Tungsten. Profile spot. Type: Profile spot Source: 2000/2500 W Tungsten Optics: 8 to 16 zoom
f 711SX2 700SX2-2000/2500 W Tungsten Type: Profile spot Source: 2000/2500 W Tungsten Optics: 8 to 16 zoom Profile spot The ideal zoom profile for all very long throw applications Combining power with a
Quick Start Guide. Celeb 250/450/450Q LED DMX
Quick Start Guide Celeb 250/450/450Q LED DMX Part No. 3100099 Rev A 04-10-2017 Center Mount Celeb LED DMX Systems CEL-250C-120U CEL-250C-230U CEL-450C-120U CEL-450C-230U Celeb 250 LED DMX Center, 120U
Spectrum Laser. User manual UK. Version 1.0
Spectrum Laser User manual 152.753UK Version 1.0 CAUTION 15. Disposal : Please disposal of the unserviceable device according to the current statutory requirements. Please read this manual fully before
Quick Start Guide. Celeb 850 LED DMX
Quick Start Guide Celeb 850 LED DMX Part No. 3100095 Rev 01 08-07-2017 Celeb 850 LED DMX CEL-850CU Celeb 850 LED DMX Center, Univ Included w/ Celeb 850 LVR-CE890 Celeb 850 Louver-Honeycomb, 90 Celeb 850
i.shine 1136 RGBW Color Stainer CN USER MANUAL
i.shine 1136 RGBW Color Stainer CN USER MANUAL Thank you very much for choosing our product. For safety purpose, please read this manual carefully before your operation. This manual included installation
714SX2. 700SX2-2000/2500 W Tungsten. Profile spot. Type: Profile spot Source: 2000/2500 W Tungsten Optics: 15 to 40 zoom
f 714SX2 700SX2-2000/2500 W Tungsten Type: Profile spot Source: 2000/2500 W Tungsten Optics: 15 to 40 zoom Profile spot The ideal zoom profile for all medium throw applications Combining power with a smooth