Acme Packet Transcoding NIU DSP Installation Guide. Formerly Net-Net 4500

Size: px

Start display at page:

Download "Acme Packet Transcoding NIU DSP Installation Guide. Formerly Net-Net 4500"

Abigail Riley
5 years ago
Views:

1 Acme Packet 4500 Transcoding NIU DSP Installation Guide Formerly Net-Net 4500 April 2015

2 Copyright , Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable: U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government. This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group. This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.

3 About This Guide Overview The Acme Packet 4500 and 3820 are high performance, high capacity session border controller that optimally delivers interactive communications voice, video, and multimedia sessions across wireline, wireless, and cable IP network borders. Audience This guide is written for network administrators, and telecommunications equipment installers and technicians. It provides information related to the hardware components, features, installation, start-up, operation, and maintenance of the Acme Packet 4500 and Only experienced and authorized personnel should perform installation, configuration, and maintenance tasks. Revision History This section contains a revision history for this document. Date Revision Number Description March 15, 2012 Revision 1.00 Initial Release May 16, 2012 Revision 1.1 added 3820 April 27, 2015 Revision 1.2 added the requirement for a high-speed fan module when running S-Cz7.2.0 and above Version 1.0 Acme Packet 4500 Transcoding NIU DSP Installation Guide iii

4 iv Acme Packet 4500 Transcoding NIU DSP Installation Guide Version 1.0

5 Acme Packet 4500 and 3820 Transcoding NIU DSP Installation Introduction This guide provides information about how to install the Transcoding NIU and DSP modules into your Acme Packet 4500 and The following is a list of the major steps required to install Transcoding NIU and DSP modules into a Acme Packet 4500 and Follow preinstallation guidelines Ground yourself and follow proper ESD grounding procedures Remove the Transcoding NIU card from the Acme Packet 4500 and 3820 chassis Install the DSP Module's into the Transcoding NIU card. Install the Transcoding NIU card into the Acme Packet 4500 and Shipped Parts A Transcoding NIU and DSP Module upgrade order contains the following: Transcoding NIU with DSP Modules installed. The Transcoding NIU can support up to twelve DSP modules per card. Installation Tools and Parts The following tools and parts are required to install a Transcoding NIU and DSP modules into the Acme Packet 4500 and #2 Phillips-head screwdriver. ESD wrist strap. ESD safe location. Version 1.0 Acme Packet 4500 Transcoding NIU DSP Installation Guide 5

6 Preinstallation This upgrade should be performed during low-traffic periods or scheduled maintenance windows. When installing or removing DSP modules move the Transcoding NIU card to an ESD safe location. System Requirements Minimum Operating System: nnscx6.3.7f1 release. Acme Packet 4500 or Minimum Bootloader: 1.10 aug When running S-Cz7.2.0 and above, you must also have a high-speed fan module in the chassis in order to avoid overheating the system. Caution Before handling a Transcoding NIU card follow the proper ESD grounding procedures. Failure to do so could damage the Transcoding NIU card and its components. ESD When performing maintenance on Acme Packet 4500 and 3820 components you must ground yourself with an ESD wrist strap. An ESD wrist strap is used to channel static electricity to ground. Proper grounding is essential for handling static-sensitive equipment. Alternatively, you can ground yourself according to established grounding guidelines of the location where the Acme Packet 4500 and 3820 resides. Note: An ESD wrist strap is not shipped with your Transcoding NIU install kit. 6 Acme Packet 4500 Transcoding NIU DSP Installation Guide Version 1.0

Transcoding NIU Removal Note: The installation procedure below shows a Acme Packet 4500. The installation procedure is exactly the same for a Acme Packet 3820. 1.

7 Transcoding NIU Removal Note: The installation procedure below shows a Acme Packet The installation procedure is exactly the same for a Acme Packet Front view of the Acme Packet 4500 chassis. 2. Rear view of the Acme Packet 4500 chassis. 3. Unscrew the two thumb screws located on each side of the Transcoding NIU card with a #2 Phillips screwdriver. The screws are spring-loaded and will be pushed forward, but will not fall out of the processing unit. 4. Pull the two ejector handles out and away from the chassis at the same time to disengage the Transcoding NIU card from the midplane and chassis. Note: Do not force the Transcoding NIU card out of the chassis. If there is any resistance. Check the alignment of the card and guide rails. Version 1.0 Acme Packet 4500 Transcoding NIU DSP Installation Guide 7

8 5. Remove the Transcoding NIU card from the Acme Packet 4500 chassis and move to an ESD safe location. 6. The Transcoding NIU card is removed from the chassis and moved to an ESD safe location. 8 Acme Packet 4500 Transcoding NIU DSP Installation Guide Version 1.0

as you have. The arrow is indicating the location of slot 0.

9 Transcoding NIU Identification, logical slot 0-11 Transcoding NIU card with 12 DSP modules installed in logical slots You must fill in slot 0 first, then slots 1, 2 consecutively and work your way up to 11 or as many DSP modules as you have. The arrow is indicating the location of slot 0. Transcoding NIU with no DSP modules installed in slots The arrow is indicating the location of slot 0. Version 1.0 Acme Packet 4500 Transcoding NIU DSP Installation Guide 9

10 DSP module Installation The Transcoding NIU card is populated with a minimum of 1 and a maximum of up to 12 DSP modules. The DSP modules must be inserted into slot 0 first and then consecutive until slot 11 is reached. Caution The DSP module is keyed and will only fir into the socket if the keyed position is correct. 1. The arrow indicates the Keyed position on the DSP module.. 2. The two white ejector handles are in the closed position. 3. With you fingers and thumbs push the two white ejector handles out to the extended position. The arrows show the direction. 10 Acme Packet 4500 Transcoding NIU DSP Installation Guide Version 1.0

11 4. The two white ejector handles are in the extended position and ready for the DSP module to be inserted into the socket. Caution The DSP module is keyed and will only fit into the socket if the keyed position is correct. 5. The arrow indicates the Keyed position on the DSP module. The DSP module will only go into the socket if the keyed position is correct. Version 1.0 Acme Packet 4500 Transcoding NIU DSP Installation Guide 11

12 6. Make sure the keyed position is correct on the DSP module and the socket, then insert the DSP module into the socket. 7. Once the DSP module is inserted into the socket properly. Apply pressure evenly across the top of the DSP module until it is inserted into the socket. 12 Acme Packet 4500 Transcoding NIU DSP Installation Guide Version 1.0

13 8. As you press down evenly across the top of the DSP module, the two white ejector handles will move up and lock the DSP module into the socket. 9. The two white ejector handles and the DSP are locked into the correct position in the socket. Repeat these steps for as many DSP modules you have, populating in slot 0 through 11 or less. Version 1.0 Acme Packet 4500 Transcoding NIU DSP Installation Guide 13

14 Transcoding NIU Installation 1. Acme Packet 4500 chassis without the Transcoding NIU card installed. 2. Insert the Transcoding NIU card into the chassis with both sides of the Transcoding NIU card inserted into the guide rails. Note: Do not force the Transcoding NIU card into the chassis. If there is any resistance remove the Transcoding NIU card and check the alignment of the card and guide rails. 3. Slide the Transcoding NIU card forward until it engages with the midplane and chassis. 4. Move the ejector handles from the extended position to the forward position and into the chassis. 14 Acme Packet 4500 Transcoding NIU DSP Installation Guide Version 1.0

15 5. With a #2 phillips head screw driver, screw in the two screws so the Transcoding NIU card is secured in the chassis. Version 1.0 Acme Packet 4500 Transcoding NIU DSP Installation Guide 15

16 System Startup Once you have completed the Transcoding NIU DSP installation you must verify that all the DSP modules are recognize by the system. Using the show prom-info phy command you can check if the DSP modules are recognized by the Acme Packet Make sure all the DSP modules you installed are present in the system. The example below shows a Transcoding NIU (4 port SFP with QOS) and 3 DSP modules installed. Note: Logically the system sees the ports as The DSP modules must be inserted into slot 0 first and then consecutive until slot 11 is reached. Physically the system sees the ports as ACLI commands 1. From Superuser mode type show prom-info phy and press <Enter> ACMESYSTEM# ACMESYSTEM# show prom-info phy Contents of PHY Assy, 4 Port SFP with QOS and DSP (This is the Transcoding NIU card.) Part Number: Serial Number: Functional Rev: BoardRev: PCB Family Type: Quad port GiGE SFP PHY ID: 4 Port GiGE w/qos & DSP Format Rev: 16 Options: 0 Manufacturer: Plexus Week/Year: 52/2011 Sequence Number: Contents of PHY DSP DSP on port 1: (This is the first DSP module in logical slot 0) Assy: DSP on DIMM (translator) Part Number: Serial Number: FunctionalRev: Artwork Rev: 2.00 PCB Family Type: 16 ID: 600e Format Rev: 10 Options: 0 Week/Year: 50/2011 Sequence Number: DSP on port 2: (This is the second DSP module in logical slot 1) Assy: DSP on DIMM (translator) Part Number: Serial Number: FunctionalRev: Artwork Rev: 2.00 PCB Family Type: 16 ID: 600e Format Rev: 10 Options: 0 16 Acme Packet 4500 Transcoding NIU DSP Installation Guide Version 1.0

17 Week/Year: 48/2011 Sequence Number: DSP on port 3: (This is the third DSP module in logical slot 2) Assy: DSP on DIMM (translator) Part Number: Serial Number: FunctionalRev: Artwork Rev: 2.00 PCB Family Type: 16 ID: 600e Format Rev: 10 Options: 0 Week/Year: 48/2011 Sequence Number: DSP on port 4: not present DSP on port 5: not present DSP on port 6: not present DSP on port 7: not present DSP on port 8: not present DSP on port 9: not present DSP on port 10: not present DSP on port 11: not present DSP on port 12: not present ACMESYSTEM# Version 1.0 Acme Packet 4500 Transcoding NIU DSP Installation Guide 17

18 18 Acme Packet 4500 Transcoding NIU DSP Installation Guide Version 1.0

Acme Packet ETC NIU Memory Upgrade Guide. Formerly Net-Net 4500

Acme Packet ETC NIU Memory Upgrade Guide. Formerly Net-Net 4500 Acme Packet 4500 ETC NIU Memory Upgrade Guide Formerly Net-Net 4500 October 2013 Copyright 2013, 2012 Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided