Serial Device Servers

Size: px

Start display at page:

Download "Serial Device Servers"

Joan Dixon
5 years ago
Views:

Total Solutions for Industrial Device Networking Device Server Introduction -2 Serial Device Server Selection Guide -7

Rackmount Device Server -24 NPort 5600 Series 8 and 16-port Device Server -28 DE-11 / DE-211 1-port RS-22/422/485

Series 1 and 2-port Device Server for Industrial Automation -40 Embedded Device Servers Tutorial -44 Embedded Device

1 Total Solutions for Industrial Device Networking Device Server Introduction -2 Serial Device Server Selection Guide -7 NPort NPort 5100 Series 1-port Device Server -16 NPort 5200 Series 2-port Device Server -20 NPort 5400 Series 4-port Rackmount Device Server -24 NPort 5600 Series 8 and 16-port Device Server -28 DE-11 / DE port RS-22/422/485 Device Server -4 Serial Device Servers NPort IA Tutorial -6 NPort IA Serial Device Server Selection Guide -8 NPort IA Series 1 and 2-port Device Server for Industrial Automation -40 Embedded Device Servers Tutorial -44 Embedded Device Server Selection Guide -45 NE-4100 Series 100 Mbps Embedded Device Server -46 WE-2100T Embedded Wireless Network Enabler -49

Device Server Introduction Enable Network Access to Your Serial Device Easy device networking with device server technology NPort device servers enable network access to traditional RS- 22/422/485

With No restrictions on host or OS type NPort device servers, you can access, manage, and configure remote facilities and equipment from anywhere in the world over the Internet.

2 Device Server Introduction Enable Network Access to Your Serial Device Easy device networking with device server technology NPort device servers enable network access to traditional RS- 22/422/485 devices. A device server is a tiny computer equipped with a CPU, a real-time OS, and TCP/IP protocols for bi-directional translation of data between serial and Ethernet formats. With No restrictions on host or OS type NPort device servers, you can access, manage, and configure remote facilities and equipment from anywhere in the world over the Internet. The NPort is an IP-based solution that makes serial devices accessible over a network. Any host computer that supports the TCP/IP protocol can access the NPort's serial ports. You are no longer restricted by the need for operating system drivers or by bus slot limitations (such as ISA or PCI). Real COM/TTY drivers for existing software In addition to providing socket access, the NPort also comes with Real COM/TTY drivers to provide access to devices from a virtual COM or TTY port. Serial Device Server Selection Table No. of Serial Ports RS-22 RS-422/485 RS-22/422/485 Isolation Wide Temperature 1 port IA5150 IA5150-M-SC IA5150-S-SC 510I 5150I IA5150I IA5150I-M-SC IA5150I-S-SC 5110-T IA5150-T IA5150-M-SC-T IA5150I-M-SC-T IA5150-S -SC -T IA5150I-M-SC-T 2 ports IA I 5210-T 520-T 522-T IA5250-T 4 ports I/5450I -- 8 ports DT DT-J M-SC S-SC DT DT-J 5650I-8-DT ports M-SC S-SC info@moxa.com

Total Solutions for Industrial Device Networking How the NPort Provides Network Access to Serial Devices Socket Mode TCP Server Mode TCP Server mode supports up to 4 connection requests In TCP Server

TCP Server mode supports up to 4 simultaneous connections, so multiple hosts can collect data from the same serial device at the same time.

computer when data is received from the attached device. After the data has been transferred, the NPort automatically closes the connection.

TCP communication. This mode is ideal for message display applications.

3 Total Solutions for Industrial Device Networking How the NPort Provides Network Access to Serial Devices Socket Mode TCP Server Mode TCP Server mode supports up to 4 connection requests In TCP Server mode, the serial port is assigned a unique IP:Port address on the TCP/IP network. The NPort simply waits passively for a host computer to establish a connection with the attached device. TCP Server mode supports up to 4 simultaneous connections, so multiple hosts can collect data from the same serial device at the same time. Socket Mode TCP Client Mode TCP Client mode connects up to 4 hosts at the same time In TCP Client mode, the NPort establishes a TCP connection between the attached device and a specified host computer when data is received from the attached device. After the data has been transferred, the NPort automatically closes the connection. Socket Mode UDP Mode UDP mode supports up to 4 multicasting groups In UDP mode, the attached device can exchange data simultaneously with up to 4 network destinations, and at a higher speed than with TCP communication. This mode is ideal for message display applications. Driver Mode Real COM Mode In Real COM mode, the serial port is assigned an IP:Port address and is mapped by special drivers to a host computer's local COM or TTY port. Legacy applications can then access the attached device using the local COM or TTY port without dealing with network protocols. Driver Mode RFC2217 Mode In RFC2217 mode, the serial port is assigned an IP:Port address and is mapped to a virtual COM port by RFC2217-compliant drivers. The RFC2217 protocol defines general COM port control options based on the Telnet protocol. The NPort supports any rd party driver that is RFC2217 compliant. info@moxa.com -2

Pair Connection Mode In Pair Connection Mode, two NPort device servers are used to transmit RS-22 signals over Ethernet, and in this way overcome the 15-meter limitation imposed by the RS-22 standard.

4 Pair Connection Mode In Pair Connection Mode, two NPort device servers are used to transmit RS-22 signals over Ethernet, and in this way overcome the 15-meter limitation imposed by the RS-22 standard. One NPort connects to the PC's COM port, and the other NPort connects to the device. Both NPorts are either connected to each other by a crossover Ethernet cable, connected to the same LAN, or connected to a WAN. Both data and modem control signals can then be exchanged between the PC and the device over Ethernet, but DCD signals will not be transmitted. Ethernet Modem Mode In Ethernet Modem mode, the serial port is connected to a PC's COM port and behaves as if it were an attached modem. However, the data travels directly over the network rather than over phone lines. Ethernet Modem mode enables network access for legacy software that was originally designed to transmit data by modem. Reverse Telnet Mode In Reverse Telnet mode, the serial port provides a connection to a server and connections are initiated by a host over Ethernet. This is similar to TCP server mode, except Reverse Telnet mode also provides Telnet-style CR/LF conversion. Reverse Telnet mode can be used for remote console management, where the NPort is used to enable network access to the serial console ports of different equipment, such as routers, switches, or servers. Mode Selection Flow Chart Start NO Using legacy COM-based software? Host requires more COM ports? YES YES Using socket program? NO TCP Which protocol, TCP or UDP? UDP Need to extend serial transmission range? NO Using MOXA's drivers? NO YES Host application is server or client? Server NO Client Need serial control parameters? YES YES Need to perform console management? YES NO TCP Client Mode TCP Server Mode RFC2217 Mode or TCP Server Mode UDP Mode Pair Connection Modes Reverse Telnet Contact your saleperson. RFC2217 Mode Real COM Mode info@moxa.com

Total Solutions for Industrial Device Networking Typical Applications Use only one IP address to control multiple serial devices over the Internet Automatic or remote data acquisition is possible

By specifying the IP address and TCP port number, a host computer can access different serial devices over the Internet.

s first serial port can be obtained by connecting to 192.168.10.

5 Total Solutions for Industrial Device Networking Typical Applications Use only one IP address to control multiple serial devices over the Internet Automatic or remote data acquisition is possible using NPort 5400 products, which can connect up to 4 serial devices with only one IP address. By specifying the IP address and TCP port number, a host computer can access different serial devices over the Internet. For example, data from NPort 5410 s first serial port can be obtained by connecting to :4001. Remote host Internet Local host Ethernet NPort 5410 RS-22 TCP Port PLC Fire Alarm Control Server sharing allows serial device management from a centralized location for more flexibility Devices that are attached to the NPort 5400 can be shared between different host computers. For example, ports 1 and 2 on the NPort can be assigned to Host A s COM and COM4, and ports and 4 can be assigned to Host B s COM and COM4. Windows Host A Temprature Control Entrance Control Windows Host B Ethernet NPort 5410 RS-22 RTU RTU RTU RTU Host A s COM Host A s COM4 Host B s COM Host B s COM4 Centralize RS-422/485 serial device control Up to 1 RS-485 devices or 9 RS-422 devices can be connected to each serial port on the NPort 540 or 540I. The web console or Windows utility can be used to configure RS-422 or RS-485 operation for each port, and both 2-wire and 4-wire RS-485 is supported. 4-wire RS-422 Host A Host B Ethernet NPort 540/540I 2- or 4-wire RS-485 Multidrop info@moxa.com -4

5000 Device Servers Are Easily Configured NPort Administrator makes installation more efficient

monitoring and server location functions.

suite, you have everything you need to manage, monitor, and modify your NPort from a remote

Configuration Features Broadcast search for NPorts on the LAN Select and configure operation

convenience NPort 5000 device servers are easily configured over the network by using the web

6 5000 Device Servers Are Easily Configured NPort Administrator makes installation more efficient NPort Administrator is designed for easy installation and configuration of NPort 5000 device servers over the network. Five groups of functions ease the installation process, allow offline COM mapping, and provide monitoring and server location functions. With both NPort Administrator and the IP Serial Library bundled in the integrated software suite, you have everything you need to manage, monitor, and modify your NPort from a remote location, hassle-free. Configuration Features Broadcast search for NPorts on the LAN Select and configure operation mode Upgrade firmware Export and import configuration Web console provides exceptional convenience NPort 5000 device servers are easily configured over the network by using the web console or Telnet console. Network Settings IP, netmask, gateway DNS server Static IP, DHCP, BOOTP Serial Settings Baudrate Flow control Data bits, stop bit, parity Communication interface Operating Settings Operation mode TCP alive check time Inactivity time Delimiter Force transmit info@moxa.com

7 Total Solutions for Industrial Device Networking IP Serial Library eases programming for socket-based serial communication What is the IP Serial Library? The IP Serial Library is a collection of Windows functions for NPort 5000 device servers. Serial command sets and common subroutines are provided. The purpose of the library is to help reduce complexity and increase efficiency when programming for serial communication over TCP/IP. For example, the IP Serial Library can be used to add new functionality to your Telnet sessions, since Telnet can only transfer data and can not monitor or configure serial line parameters. Why Use the IP Serial Library? For programmers who are familiar with serial communication, the IP Serial Library provides well-designed function calls that have the same style as MOXA s PComm Library. The IP Serial Library is amazingly simple and easy to understand. By including the library in your VB, C, or Delphi programming environment, you will be able to develop TCP/IP applications that have control of serial communication parameters. When Real COM mode is used, NPort serial device servers use two TCP ports for communication between an attached device and a host computer s Real COM driver. The two ports, a data port and a command port, provide pure data transfer without requiring encoding and decoding. With the IP Serial Library, only one port is used to communicate with a user's application, and no encoding or decoding is required. IP Serial Library Example char nportip= ; char buffer[255]; int port = 1; int portid; nsio_init(); portid = nsio_open(nportip, port); nsio_ioctl(portid, B9600, (BIT_8 STOP_1 P_NONE) ); sleep(1000); nsio_read(port, buffer, 200); nsio_close(portid); nsio_end(); /*data buffer, 255 chars */ /*1st port */ /* port handle */ /*initial IP Serial Library */ /*1st port, nport IP= */ /*set 9600, N81 */ /* wait for 1000 ms for data */ /* read 200 bytes from port 1 */ /* clost this serial port */ /* close IP Serial Library */ IP Serial API Function List Server Control Port Control Input/Output Data Port Status Inquiry Miscellaneous nsio_init nsio_open nsio_read nsio_lstatus nsio_break nsio_end nsio_close nsio_setreadtimeouts nsio_data_status nsio_break_on nsio_resetserver nsio_ioctl nsio_write nsio_break_off nsio_checkalive nsio_fl owctrl nsio_setwritetimeouts nsio_breakcount nsio_dtr nsio_rts nsio_lctrl nsio_baud nsio_resetport info@moxa.com -6

8 Serial Device Server Selection Guide Model Name NPort 5110 NPort 510 NPort 5150 LAN Serial Interface Software Features 10/100M Ethernet 1.5 KV Magnetic Isolation Number of Ports 1 RS-22 1 RS-422/485 1 RS-22/422/485 Connector DB9 (Male) DB9 (Male) DB9 (Male) Speed 110 bps to 20.4 Kbps 50 bps to Kbps 50 bps to Kbps Communication Parameters Parity: None, Even, Odd, Space, Mark; Data Bits: 5, 6, 7, 8; Stop Bit(s): 1, 1.5, 2 Flow Control (RTC/CTS/XON/XOFF) Serial Console (RS-22) 2 KV Serial Line Isolation 15 KV ESD Protection Patented ADDC Protocols Utilities OS Driver Support Configuration ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP NPort Driver Manager for Windows 95/98/ME/NT/2000/XP/200/Vista Windows 95/98/ME/NT/2000/XP/200/Vista/XP x64/200 x64/vista x64 Real COM driver Linux real TTY driver Linux2.4.x(x86) / Linux2.6x(x86) / Linux 2.6x(x64) Unix fixed TTY driver SCO Open Server 5 / SCO Open Server 6 / SCO Open Server 7 / Sun Solaris 10 / QNX 4.25 / QNX 6 / FreeBSD 5.x / FreeBSD 6.x Web Browser, Serial/Telnet Console, or Windows Utility Operation Modes Real COM Real COM, TCP server, TCP client, UDP, Pair Connection, Reverse Telnet, Ethernet Modem, Disabled Mode Advanced Built-in Features Power Mechanical Environment Regulatory Approvals Warranty Buzzer Real-Time Clock Watch Dog Timmer Power Input 12 to 48 VDC Power Consumption ma@12v (max.) ma@12v (max.) ma@12v (max.) 4 KV Burst Protection (EFT), EN KV Surge Protection, EN Casing Dimensions (W H D) Aluminum (1 mm) SECC Sheet Metal (1 mm) mm ( in) mm ( in) mm ( in) DIN-Rail/Wall Mountable Operating Temperature Storage Temperature 0 to 55 C (2 to 11 F), 5 to 95% RH -20 to 85 C (-4 to 185 F), 5 to 95% RH Wide Temperature Models, 40 to 75 C (-40 to 167 F) Safety EMC Medical UL UL UL UL TÜV EN EN EN FCC Part 15, Subpart B Class A Class A Class A CE EN55022 / EN55024 Class A Class A Class A EN Class B EN55011 DNV 5 years info@moxa.com

9 Total Solutions for Industrial Device Networking NPort 5210 NPort 520 NPort 522 NPort 522I DE-11 DE M Ethernet 2 (RS-22) 1 RS-22, 1 RS-422/485 2 RS-422/485 2 RS-422/485 1 RS-22/422/485 1 RS-22/422/485 RJ45 Terminal Block Terminal Block Terminal Block DB9 (Female) DB25 (Female) 110 bps to 20.4 Kbps 110 bps to 20.4 Kbps 110 bps to 20.4 Kbps 110 bps to 20.4 Kbps 50 bps to 20.4 Kbps 50 bps to 20.4 Kbps Parity: None, Even, Odd, Space, Mark; Data Bits: 5, 6, 7, 8; Stop Bit(s): 1, 1.5, 2 XON/XOFF only XON/XOFF only ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP NPort Driver Manager for Windows 95/98/ME/NT/2000/XP/200/Vista Windows 95/98/ME/NT/2000/XP/200/Vista/XP x64/200 x64/vista x64 Real COM driver Linux real TTY driver Linux2.4.x(x86) / Linux2.6x(x86) / Linux 2.6x(x64) Unix fixed TTY driver SCO Open Server 5 / SCO Open Server 6 / SCO Open Server 7 / Sun Solaris 10 / QNX 4.25 / QNX 6 / FreeBSD 5.x / FreeBSD 6.x Web Browser, Serial/Telnet Console, or Windows Utility Real COM, TCP server, TCP client, UDP, Pair Connection, Reverse Telnet, Disabled Mode ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, ARP NPort Management Suite for Windows 95/98/ME/NT/2000/XP/200 Serial/Telnet Console, or Windows Utility Real COM, TCP server, TCP client, UDP, Pair Connection, Ethernet Modem 12 to 48 VDC 9 to 0 VDC 12 to 0 VDC 05 12V (max.) V (max.) V (max.) V (max.) 00 9V (max.) V (max.) mm ( in) mm ( in) mm ( in) mm ( in) mm ( in) mm ( in) 0 to 55 C (2 to 11 F), 5 to 95% RH -20 to 85 C (-4 to 185 F), 5 to 95% RH NPort 5210-T NPort 520-T NPort 522-T NPort 522I-T UL UL UL UL UL60950 UL60950 EN EN EN EN EN60950 EN60950 Class A Class A Class A Class A Class B Class B Class A Class A Class A Class A Class B Class B 5 years info@moxa.com -8

10 Serial Device Server Selection Guide Model Name NPort 5410 NPort 540 NPort 540I NPort 5450 NPort 5450I LAN Serial Interface Software Features Operation Mode Advanced Built-in Features Power Mechanical Environment Regulatory Approvals Warranty 10/100 Mbps Ethernet 1.5 KV Magnetic Isolation Serial RS-22 RS-422/485 RS-422/485 RS-22/422/485 RS-22/422/485 Connector DB9 (Male) Terminal Blcok Terminal Blcok DB9 (Male) DB9 (Male) Speed 50 bps to Kbps Communication Parameters Parity: None, Even, Odd, Space, Mark; Data Bits: 5, 6, 7, 8; Stop Bit(s): 1, 1.5, 2 Flow Control (RTC/CTS/ XON/XOFF) XON/OFF Only XON/OFF Only Serial Console (RS-22) -- 2 KV Serial Line Isolation KV ESD Protection 1K / 150 K Pull High/Low Resistance -- Selectable by DIP Switch Patented ADDC -- Protocols Utilities OS Driver Support Configuration HMI LCM Display with Four Push Buttons ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP NPort Driver Manager for Windows 95/98/ME/NT/2000/XP/200/Vista Windows 95/98/ME/NT/2000/XP/200/Vista/XP x64/200 x64/vista x64 Real COM driver Linux real TTY driver Linux2.4.x(x86) / Linux2.6x(x86) / Linux 2.6x(x64) Unix fixed TTY driver SCO Open Server 5 / SCO Open Server 6 / SCO Open Server 7 / Sun Solaris 10 QNX 4.25 / QNX 6 / FreeBSD 5.x / FreeBSD 6.x Web Browser, Serial/Telnet Console, or Windows Utility Real COM, TCP server, TCP client, UDP, Pair Connection, Reverse Telnet, Disabled Mode Buzzer Real-Time Clock Watch Dog Timer Power Input 12 to 48 VDC Power Comsumption 50 12V (max.) 60 12V (max.) V (max.) 50 12V V 4 KV Burst Protection (EFT), EN KV Surge Protection, EN Casing SECC Sheet metal (1 mm) Dimensions (W H D) mm / in (with mounting kit); mm / in (without mounting kit) DIN-Rail / Wall Mountable Operating Temperature Storage Temperature Safety EMC Medical 0 to 55 C (2 to 11 F), 5 to 95% RH -20 to 70 C (-4 to 158 F), 5 to 95% RH UL UL TÜV EN FCC Part 15, Subpart B, Class A CE EN55022 Class A CE EN55024 EN Class B EN years info@moxa.com

11 Total Solutions for Industrial Device Networking Model Name NPort NPort NPort LAN Serial Interface Software Features Operation Mode Advanced Built-in Features Power Mechanical Environment Regulatory Approvals Warranty 10/100 Mbps Ethernet 100 Mbps Fiber Connector RJ45 RJ45 RJ KV Magnetic Isolation Number of Ports 8 RS RS-22 8 RS-422/485 Connector RJ45 RJ45 RJ45 Speed 50 bps to Kbps 50 bps to Kbps 50 bps to Kbps Communication Parameters Parity: None, Even, Odd, Space, Mark; Data Bits: 5, 6, 7, 8; Stop Bit(s): 1, 1.5, 2 Flow Control (RTC/CTS/ XON/XOFF) XON/XOFF 15 KV ESD Protection Patented ADDC Protocols Utilities OS Driver Support Configuration ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP NPort Driver Manager for Windows 95/98/ME/NT/2000/XP/200/Vista Windows 95/98/ME/NT/2000/XP/200/Vista/XP x64/200 x64/vista x64 Real COM driver Linux real TTY driver Linux2.4.x(x86) / Linux2.6x(x86) / Linux 2.6x(x64) Unix fixed TTY driver SCO Open Server 5 / SCO Open Server 6 / SCO Open Server 7 / Sun Solaris 10 / QNX 4.25 / QNX 6 / FreeBSD 5.x / FreeBSD 6.x Web Browser, Serial/Telnet Console, or Windows Utility Real COM, TCP server, TCP client, UDP, Pair Connection, RFC2217, Reverse Telnet, Disabled Mode, PPP Mode HMI LCM Display with Four Push Buttons Buzzer Real-Time Clock Watch Dog Timer Power Input 100 to 240 VAC, 47 to 6 Hz Power Comsumption V V 4 KV Burst Protection (EFT), EN KV Surge Protection, EN Casing Aluminum (1 mm) SECC Sheet Metal (1 mm) mm 440 x 1.77 x 198 mm 440 x 1.77 x 198 mm Dimensions (W H D) (17. x 1.77 x 7.8 in) (17. x 1.77 x 7.8 in) (17. x 1.77 x 7.8 in) Rack/Wall Mountable Operating Temperature Storage Temperature Safety EMC 0 to 55 C (2 to 11 F), 5 to 95% RH -20 to 70 C (-4 to 158 F), 5 to 95% RH UL UL60950 UL60950 UL60950 TÜV EN60950 EN60950 EN60950 FCC Part 15, Subpart B, Class A CE EN55022 Class A CE EN55024 IEC years info@moxa.com -10

12 Serial Device Server Selection Guide Model Name LAN Serial Interface Software Features Operation Mode Advanced Built-in Features Power Mechanical Environmental Regulatory Approvals Warranty 10/100 Mbps Ethernet 100 Mbps Fiber Connector 1.5 KV Magnetic Isolation Number of Ports Connector Speed Communication Parameters Flow Control (RTC/CTS/ XON/XOFF) 15 KV ESD Protection Patented ADDC Protocols Utilities OS Driver Support Configuration HMI LCM Display with Four Push Buttons Buzzer Real-Time Clock Watch Dog Timer Power Input Power Comsumption 4 KV Burst Protection (EFT), EN KV Surge Protection, EN Aluminum (1 mm) Casing SECC Sheet Metal (1 mm) Dimensions (W H D) Rack/Wall Mountable Operating Temperature Storage Temperature Wide Temperature Models, -40 to 75 C (-40 to 167 F) UL Safety TÜV FCC Part 15, Subpart B, Class A CE EN55022 Class A EMC CE EN55024 IEC NPort NPort V NPort V RJ45 RJ45 RJ45 16 RS-422/ RS RS-22 RJ45 RJ45 RJ45 50 bps to Kbps 50 bps to Kbps 50 bps to Kbps Parity: None, Even, Odd, Space, Mark; Data Bits: 5, 6, 7, 8; Stop Bit(s): 1, 1.5, 2 XON/XOFF ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP NPort Driver Manager for Windows 95/98/ME/NT/2000/XP/200/Vista Windows 95/98/ME/NT/2000/XP/200/Vista/XP x64/200 x64/vista x64 Real COM driver Linux real TTY driver Linux2.4.x(x86) / Linux2.6x(x86) / Linux 2.6x(x64) Unix fixed TTY driver SCO Open Server 5 / SCO Open Server 6 / SCO Open Server 7 / Sun Solaris 10 / QNX 4.25 / QNX 6 / FreeBSD 5.x / FreeBSD 6.x Web Browser, Serial/Telnet Console, or Windows Utility Real COM, TCP server, TCP client, UDP, Pair Connection, RFC2217, Reverse Telnet, Disabled Mode, PPP Mode 100 to 240 VAC, 47 to 6Hz 8 to 72 VDC V 15 48V (max.) x 1.77 x 198 mm 440 x 1.77 x 198 mm 440 x 1.77 x 198 mm (17. x 1.77 x 7.8 in) (17. x 1.77 x 7.8 in) (17. x 1.77 x 7.8 in) 0 to 55 C (2 to 11 F), 5 to 95% RH -20 to 70 C (-4 to 158 F), 5 to 95% RH UL60950 UL60950 UL60950 EN60950 EN60950 EN years info@moxa.com

13 Total Solutions for Industrial Device Networking Model Name LAN Serial Interface 10/100 Mbps Ethernet 100 Mbps Fiber Connector 1.5 KV Magnetic Isolation Number of Ports Connector Speed Communication Parameters Flow Control (RTC/CTS/ XON/XOFF) 15 KV ESD Protection Patented ADDC Protocols Utilities NPort NPort NPort M-SC Multi-Mode RJ45 RJ45 SC 8 RS-22/422/ RS-22/422/485 8 RS-22/422/485 RJ45 RJ45 RJ45 50 bps to Kbps 50 bps to Kbps 50 bps to Kbps Parity: None, Even, Odd, Space, Mark; Data Bits: 5, 6, 7, 8; Stop Bit(s): 1, 1.5, 2 ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP NPort Driver Manager for Windows 95/98/ME/NT/2000/XP/200/Vista Software Features OS Driver Support Windows 95/98/ME/NT/2000/XP/200/Vista/XP x64/200 x64/vista x64 Real COM driver Linux real TTY driver Linux2.4.x(x86) / Linux2.6x(x86) / Linux 2.6x(x64) Unix fixed TTY driver SCO Open Server 5 / SCO Open Server 6 / SCO Open Server 7 / Sun Solaris 10 / QNX 4.25 / QNX 6 / FreeBSD 5.x / FreeBSD 6.x Operation Mode Advanced Built-in Features Power Mechanical Environment Regulatory Approvals Warranty Configuration HMI LCM Display with Four Push Buttons Buzzer Real-Time Clock Watch Dog Timer Power Input Power Comsumption 4 KV Burst Protection (EFT), EN KV Surge Protection, EN Aluminum Case (1 mm) Casing SECC Sheet Metal (1 mm) Dimensions (W H D) Rack/Wall Mountable Operating Temperature Storage Temperature Wide Temperature Models, -40 to 75 C (-40 to 167 F) UL Safety TÜV FCC Part 15, Subpart B, Class A CE EN55022 Class A EMC CE EN55024 IEC Web Browser, Serial/Telnet Console, or Windows Utility Real COM, TCP server, TCP client, UDP, Pair Connection, RFC2217, Reverse Telnet, Disabled Mode, PPP Mode 100 to 240 VAC, 47 to 6 Hz V x 1.77 x 198 mm 440 x 1.77 x 198 mm 440 x 1.77 x 198 mm (17. x 1.77 x 7.8 in) (17. x 1.77 x 7.8 in) (17. x 1.77 x 7.8 in) 0 to 55 C (2 to 11 F), 5 to 95% RH -20 to 70 C (-4 to 158 F), 5 to 95% RH UL UL UL EN EN EN years info@moxa.com -12

14 Serial Device Server Selection Guide Model Name LAN Serial Interface 10/100 Mbps Ethernet 100 Mbps Fiber Connector 1.5 KV Magnetic Isolation Number of Ports Connector Speed Communication Parameters Flow Control (RTC/CTS/ XON/XOFF) 15 KV ESD Protection Patented ADDC Protocols Utilities NPort M-SC NPort S-SC NPort S-SC Multi-Mode Single-Mode Single-Mode SC SC SC 16 RS-22/422/485 8 RS-22/422/ RS-22/422/485 RJ45 RJ45 RJ45 50 bps to Kbps 50 bps to Kbps 50 bps to Kbps Parity: None, Even, Odd, Space, Mark; Data Bits: 5, 6, 7, 8; Stop Bit(s): 1, 1.5, 2 ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP NPort Driver Manager for Windows 95/98/ME/NT/2000/XP/200/Vista Software Features Operation Mode Advanced Built-in Features Power Mechanical Environment Regulatory Approvals Warranty OS Driver Support Configuration HMI LCM Display with Four Push Buttons Buzzer Real-Time Clock Watch Dog Timer Power Input Power Comsumption 4 KV Burst Protection (EFT), EN KV Surge Protection, EN Aluminum (1 mm) Casing SECC Sheet Metal (1 mm) Dimensions (W H D) Rack/Wall Mountable Operating Temperature Storage Temperature Wide Temperature Models, -40 to 75 C (-40 to 167 F) UL Safety TÜV FCC Part 15, Subpart B, Class A CE EN55022 Class A EMC CE EN55024 IEC Windows 95/98/ME/NT/2000/XP/200/Vista/XP x64/200 x64/vista x64 Real COM driver Linux real TTY driver Linux2.4.x(x86) / Linux2.6x(x86) / Linux 2.6x(x64) Unix fixed TTY driver SCO Open Server 5 / SCO Open Server 6 / SCO Open Server 7 / Sun Solaris 10 / QNX 4.25 / QNX 6 / FreeBSD 5.x / FreeBSD 6.x Web Browser, Serial/Telnet Console, or Windows Utility Real COM, TCP server, TCP client, UDP, Pair Connection, RFC2217, Reverse Telnet, Disabled Mode, PPP Mode 100 to 240 VAC, 47 to 6 Hz x 1.77 x 198 mm 440 x 1.77 x 198 mm 440 x 1.77 x 198 mm (17. x 1.77 x 7.8 in ) (17. x 1.77 x 7.8 in) (17. x 1.77 x 7.8 in) 0 to 55 C (2 to 11 F), 5 to 95% RH -20 to 70 C (-4 to 158 F), 5 to 95% RH UL UL UL EN EN EN years info@moxa.com

15 Total Solutions for Industrial Device Networking Model Name LAN Serial Interface Software Features Operation Mode Advanced Built-in Features Power Mechanical Environment Regulatory Approvals Warranty 10/100 Mbps Ethernet 100 Mbps Fiber Connector 1.5 KV Magnetic Isolation Number of Ports Connector Speed Communication Parameters Flow Control (RTC/CTS/ XON/XOFF) 2 KV Serial Line Isolation 15 KV ESD Protection Patented ADDC Protocols Utilities OS Driver Support Configuration HMI LCM Display with Four Push Buttons Buzzer Real-Time Clock Watch Dog Timer Power Input Power Comsumption 4 KV Burst Protection (EFT), EN KV Surge Protection, EN Aluminum Casing (1 mm) Dimensions (W H D) DIN-Rail / Wall Mountable Operating Temperature Storage Temperature Safety EMC UL TÜV FCC Part 15, Subpart B CE EN CE EN55024 IEC NPort DT NPort DT-J NPort DT NPort 5650I-8-DT NPort DT-J RJ45 RJ45 RJ45 RJ45 RJ45 8 RS-22 8 RS-22 8 RS-22/422/485 8 RS-22/422/485 8 RS-22/422/485 DB9 (Male) RJ45 DB9 (Male) DB9 (Male) RJ45 50 bps to Kbps Parity: None, Even, Odd, Space, Mark; Data Bits: 5, 6, 7, 8; Stop Bit(s): 1, 1.5, ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP NPort Driver Manager for Windows 95/98/ME/NT/2000/XP/200/Vista Windows 95/98/ME/NT/2000/XP/200/Vista/XP x64/200 x64/vista x64 Real COM driver Linux real TTY driver Linux2.4.x(x86) / Linux2.6x(x86) / Linux 2.6x(x64) Unix fixed TTY driver SCO Open Server 5 / SCO Open Server 6 / SCO Open Server 7 / Sun Solaris 10 QNX 4.25 / QNX 6 / FreeBSD 5.x / FreeBSD 6.x Web Browser, Serial/Telnet Console, or Windows Utility Real COM, TCP server, TCP client, UDP, Pair Connection, RFC2217, Reverse Telnet, Disabled Mode, PPP Mode 12 to 48 VDC 12 to 48 VDC 12 to 48 VDC 12 to 48 VDC 12 to 48 VDC 615 (max.) 615 (max.) 615 (max.) 615 (max.) 615 (max.) 197 x 125 x x 125 x x 125 x x 125 x x 125 x 44 (7.76 x 4.92 x 1.7 in) (7.76 x 4.92 x 1.7 in) (7.76 x 4.92 x 1.7 in) (7.76 x 4.92 x 1.7 in) (7.76 x 4.92 x 1.7 in) 0 to 55 C (2 to 11 F), 5 to 95% RH -20 to 70 C (-4 to 158 F), 5 to 95% RH UL60950 UL60950 UL60950 UL60950 UL60950 EN60950 EN60950 EN60950 EN60950 EN60950 Class A Class A Class A Class A Class A Class A Class A Class A Class A Class A 5 years info@moxa.com -14

5100 Series 1-port Features Small size Real COM/TTY drivers for Windows and Linux Standard TCP/IP interface and versatile operation modes Easy-to-use Windows utilty for mass installation Built-in 15

servers are designed to make industrial serial devices instantly Internet-ready.

16 5100 Series 1-port Features Small size Real COM/TTY drivers for Windows and Linux Standard TCP/IP interface and versatile operation modes Easy-to-use Windows utilty for mass installation Built-in 15 KV ESD protection for all serial signals SNMP MIB-II for network management Configuration by Telnet or web browser Adjustable termination resistor for the RS-485 port Overview NPort 5100 device servers are designed to make industrial serial devices instantly Internet-ready. Their small size makes them ideal for connecting devices such as card readers or payment terminals to an IP-based Ethernet LAN. With NPort device servers, your devices can be made accessible to your software from anywhere on the local LAN or the Internet. Most Cost-Effective Serial-to-Ethernet Solution Using serial-to-ethernet to connect legacy serial devices to Ethernet is no longer a novel solution. Users now expect to be able to find device servers that are cost-effective, provide a broad selection of different functions, and are high quality. With its full support of Microsoft and Linux operating systems and solid 5-year warranty, NPort 5100 is one of the best device server solutions in the worldwide industrial market. Adjustable Termination and Pull High/Low Resistors In some critical environments, termination resistors may be needed values is universally compatible for all environments, NPort 5100 to prevent the reflection of serial signals. When using termination device servers allow user adjustment of termination and pull high/low resistors, it is also important to set the pull high/low resistors correctly resistor values for each serial port, using jumpers. so that the electrical signal is not corrupted. Since no set of resistor Standard TCP/IP Interface and Versatile Operation Modes The NPort 5110 can operate in TCP Server, TCP Client, UDP compatibility with software based on a standard network API (Winsock, Server/Client, Pair Connection, or Ethernet Modem mode, ensuring BSD Sockets). Real COM/TTY Drivers for Existing Software With the Real COM/TTY drivers that are provided with each NPort, software designed for communication with COM/TTY ports can be instantly and seamlessly integrated into a TCP/IP network. This is an excellent way to preserve your software investment and enjoy the benefits of networking your serial devices, with no fuss. Easy Troubleshooting NPort 5100 device servers support SNMP V2, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an alert can be sent instead. Users can define the trigger for those alerts using MOXA s Windows utility or the web console. For example, alerts can be triggered by a warm start, a cold start, or a change in password info@moxa.com

Total Solutions for Industrial Device Networking NPort 5110, 510, 5150 Power input Power jack 12 to 48 VDC Ethernet RJ45 10/100 Mbps Reset button Ethernet RJ45 10/100 Mbps

Information NPort 5110: 1-port RS-22 device server NPort 510: 1-port RS-422/485 device server NPort 5150: 1-port RS-22/422/485 device server Package Checklist 1 NPort 5100

17 Total Solutions for Industrial Device Networking NPort 5110, 510, 5150 Power input Power jack 12 to 48 VDC Ethernet RJ45 10/100 Mbps Reset button Ethernet RJ45 10/100 Mbps Reset button Power input Power jack 12 to 48 VDC Power input Power jack 12 to 48 VDC Reset button Ethernet RT45 10/100 Mbps DK-5A RS-22/422/485 RS-22 RS-422/485 Ordering Information NPort 5110: 1-port RS-22 device server NPort 510: 1-port RS-422/485 device server NPort 5150: 1-port RS-22/422/485 device server Package Checklist 1 NPort 5100 Device Server Power Adaptor Quick Installation Guide NPort Document and Software CD-ROM Optional Accessories DK-5A: DIN-Rail Mounting Kit (5 mm) info@moxa.com -16

18 Dimensions (unit = mm) NPort 5110 NPort 510 NPort Port 1 RS-422/485 Port 1 RS-22/422/485 Pin Assignment NPort 5110 NPort NPort 5150 PIN RS-22 1 DCD 2 RxD TxD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS PIN RS-422/485 (4W) RS-485 (2W) 1 TxD-(A) 2 TxD+(B) RxD+(B) Data+(B) 4 RxD-(A) Data-(A) 5 GND GND PIN RS-22 RS-422/485 (4W) RS-485 (2W) 1 DCD TxD-(A) 2 RxD TxD+(B) TxD RxD+(B) Data+(B) 4 DTR RxD-(A) Data-(A) 5 GND GND GND 6 DSR 7 RTS 8 CTS info@moxa.com

19 Total Solutions for Industrial Device Networking Specifications LAN Ethernet: 10/100 Mbps, RJ45 Protection: Built-in 1.5 KV magnetic isolation NPort 5110 Serial Interface Interface: RS-22 No. of Ports: 1 Port Type: DB9 (Male) Transmission Speed: Kbps Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Serial Line Protection: 15 KV ESD for all signals NPort 510 Serial Interface Interface: RS-422/485 No. of Ports: 1 Port Type: DB9 (Male) Transmission Speed: Kbps Signals RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (2-wire): Tx+, Tx-, Rx+, Rx-, GND Serial Line Protection: 15 KV ESD for all signals RS-485 Data Direction: ADDC (Automatic Data Direction Control) NPort 5150 Serial Interface Interface: RS-22/422/485 No. of Ports: 1 Port Type: DB9 (Male) Transmission Speed: Kbps Signals RS-22: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND Serial Line Protection: 15 KV ESD for all signals RS-485 Data Direction ADDC (Automatic Data Direction Control) Power Line Protection: 4 KV burst (EFT), EN , 2 KV surge, EN Advanced Built-in Features: Watchdog timer Serial Communication Parameters Parity: None, Even, Odd, Space, Mark Data Bits: 5, 6, 7, 8 Stop Bit(s): 1, 1.5, 2 Flow Control: RTS/CTS, DTR/DSR (for RS-22 only), XON/XOFF Software Features Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP Utilities: NPort Administrator for Windows 95/98/ME/NT/2000/XP/200/Vista OS Driver Support: Windows 95/98/ME/NT/2000/XP/200/XP x64/200 x64/ COM driver/ Linux Real TTY driver/sco Unix/SCO OpenServer 5/UnixWare 7/Unix Ware 2.1.x/SVR4.2/QNX Configuration: Web console, serial console, Telnet console, or Windows utility Power Requirements Power Input: 12 to 48 VDC Power Consumption: NPort 5110: ma@12v, 72 ma@24v NPort 510: 200 ma@12v, 106 ma@24v NPort 5150: 200 ma@12v, 106 ma@24v Mechanical Casing: Aluminum case (1 mm) Dimensions (W H D): mm ( in) Gross Weight: kg Environment Operating Temperature: 0 to 55 C (2 to 11 F), 5 to 95%RH -40 to 75 C (-40 to 167 F) for wide temperature models Storage Temperature: -20 to 85 C (-4 to 185 F), 5 to 95%RH Regulatory Approvals EMC FCC Class A, CE Class A, Safety UL, CUL, TÜV Warranty: 5 years MTBF NPort 5110: 279/22 hrs NPort 510: hrs NPort 5150: hrs info@moxa.com -18

2-port 5200 Series Standard TCP/IP Interface and Versatile Operation Modes NPort 5200 device servers can operate in TCP Server, TCP Client, or UDP operation mode, ensuring compatibility with software

Ethernet 2 or 4-wire RS-485 with patented Automatic Data Direction Control (ADDC ) Built-in 15 KV ESD protection for all serial signals Supports SNMP MIB-II for network management standard network

Real COM/TTY Drivers for Existing Software With the Real COM/TTY drivers that are provided with each NPort, software designed for communication with COM/TTY ports can be instantly and seamlessly

20 2-port 5200 Series Standard TCP/IP Interface and Versatile Operation Modes NPort 5200 device servers can operate in TCP Server, TCP Client, or UDP operation mode, ensuring compatibility with software based on a Features Makes serial devices Internet ready Versatile socket operation modes, including TCP Server, TCP Client, UDP Easy mass installation with Windows utility Small size 10/100 Mbps Ethernet 2 or 4-wire RS-485 with patented Automatic Data Direction Control (ADDC ) Built-in 15 KV ESD protection for all serial signals Supports SNMP MIB-II for network management standard network API (Winsock, BSD Sockets). Real COM/TTY Drivers for Existing Software With the Real COM/TTY drivers that are provided with each NPort, software designed for communication with COM/TTY ports can be instantly and seamlessly integrated into a TCP/IP network. This is Typical Application an excellent way to preserve your software investment and enjoy the benefits of networking your serial devices, with no fuss. Control Remote Serial Devices Using TCP/IP or Traditional COM/TTY Port By specifying the NPort 5200's IP address and port number, a network sockets API can obtain access to the attached serial device over the network, from any host computer that supports TCP/IP. For legacy Windows or Linux software that is COM or TTY-based, MOXA's COM/TTY drivers provide a seamless way to operate over the Internet. COM Driver or Network Socket Operation Remote Host Windows/Linux Local Host Windows/Linux Internet Ethernet :4001 NPort 520/522 Driver TCP Server TCP Client UDP RS-485 (2 or 4-wire) Up to 2 Serial Devices info@moxa.com

Total Solutions for Industrial Device Networking NPort 522, 520, 5210 Ethernet RJ45 10/100 Mbps Reset Button Power Input Terminal Block 12 to 48 VDC Ethernet RJ45 10/100 Mbps Reset Button Power Input

Information NPort 5210: 2-port RS-22 serial device server NPort 5210-T: NPort 5210, -40 to 75 C operating temperature NPort 520: 2-port serial device server with 1 RS-22 port, 1 RS-422/485 port NPort

21 Total Solutions for Industrial Device Networking NPort 522, 520, 5210 Ethernet RJ45 10/100 Mbps Reset Button Power Input Terminal Block 12 to 48 VDC Ethernet RJ45 10/100 Mbps Reset Button Power Input Terminal Block Ethernet RJ45 10/100 Mbps Reset Button 12 to 48 VDC Power Input Terminal Block 12 to 48 VDC DIN-Rail Kit (Optional) DK-5A RS-422/485 RS-22 RS-422/485 8-pin RJ45, RS-22 Ordering Information NPort 5210: 2-port RS-22 serial device server NPort 5210-T: NPort 5210, -40 to 75 C operating temperature NPort 520: 2-port serial device server with 1 RS-22 port, 1 RS-422/485 port NPort 520-T: NPort 520, -40 to 75 C operating temperature NPort 522: 2-port RS-422/485 serial device server NPort 522-T: NPort 522, -40 to 75 C operating temperature NPort 522I: 2-port RS-422/485 serial device server with 2 KV isolation NPort 522I-T: 2-port RS-422/485 serial device server with 2 KV isolation, -40 to 75 C operating temperature Package Checklist 1 NPort 5200 Device Server Quick Installation Guide NPort Document and Software CD-ROM Power Jack to Terminal Block Power Cable Optional Accessories DK-5A: DIN-Rail Mounting Kit (5 mm) DIN-Rail Power Supply: See page 12-7 Terminal Block: : See page info@moxa.com -20

22 Dimensions (unit = mm) NPort 5210 NPort 520 NPort 522/522I 22.0 mm (0.87 in) V- V V Ready Link P1 RESET 10/100M Ethernet O 6 mm (0.24 in) O 4 mm (0.16 in) V- V V Ready Link P1 RESET 10/100M Ethernet V- V V Ready Link P1 RESET 10/100M Ethernet P2 P2 P mm (.95 in) 5210 Industrial RS-22 Device Server 12.5 mm (0.49 in) 25 mm (0.98 in) Industrial RS-22/422/485 Device Server Industrial RS-422/485 Device Server 21. mm (0.8 in) 42. mm (1.67 in) P1 RS mm (2.64 in) 78 mm (.07 in) 90.2 mm (.55 in) P2 RS-22 O 7 mm (0.28 in) 22.0 mm (0.87 in) Tx P1 RS-22 Rx RTS CTS GND T+ P2 RS-485/422 T+ P1 RS-485/422 T- R+/D+ R-/D- GND T- R+/D+ R-/D- GND T+ P2 RS-485/422 T- R+/D+ R-/D- GND Pin Assignment NPort 5210/5210-T RJ45 RS-22 Port 1 8 PIN RS-22 1 DSR (in) 2 RTS (out) GND 4 TxD (out) PIN RS-22 5 RxD (in) 6 DCD (in) 7 CTS (in) 8 DTR (out) NPort 520/520-T NPort 522/522-T/522I/522I-T RS-22/422/485 Terminal Block Wiring RS-422/485 Terminal Block Wiring NPort 522/522-T Signals Tx P1 RS-22 Rx RTS CTS GND P2 RS-485/422 T+ T- R+/D+ R-/D- GND NPort 522/522-T NPort 522I/522I-T Signals P1 RS-485/422 T+ T- R+/D+ R-/D- GND T+ T- R+/D+ R-/D- GND P2 RS-485/422 Serial Device Signals RxD TxD CTS RTS GND Rx+ Rx- Tx+ / Data+ Tx- / Data- GND Serial Device Signals Tx+ / Data+ Tx- / Data- Rx+ Rx- Tx+ / Data+ Tx- / Data- GND Rx+ Rx- GND info@moxa.com

23 Total Solutions for Industrial Device Networking Specifications LAN Ethernet: 10/100 Mbps, RJ45, Auto MDI/MDIX Protection: Built-in 1.5 KV magnetic isolation Serial NPort 5210/5210-T No. of Ports: 2 (RS-22) Port Type: RJ45 (8-pin) Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Serial Line Protection: 15 KV ESD for all signals NPort 520/520-T No. of Ports: 1 RS-22 port and 1 RS-422/485 port Port Type: Terminal Block (5 pins per port) Signals: RS-22: TxD, RxD, RTS, CTS, GND RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND Serial Line Protection: 15 KV ESD for all signals RS-485 Data Direction: Patented Automatic Data Direction Control (ADDC ) NPort 522/522I/522-T/525I-T No. of Ports: 2 (RS-422/485) Port Type: Terminal block (5 pins per port) Signals: RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND Serial Line Protection: 15 KV ESD for all signals, 2 KV isolation protection for NPort 522I RS-485 Data Direction: Patented Automatic Data Direction Control (ADDC ) Serial Line Protection: 15 KV ESD for all signals Power Line Protection: 1 KV Burst (EFT), EN KV Surge, EN Built-in Buzzer Built-in Real Time Clock Built-in Watchdog Timer Serial Communication Parameters Parity: None, Even, Odd, Space, Mark Data Bits: 5, 6, 7, 8 Stop Bit(s): 1, 1.5, 2 Flow Control: RTS/CTS (for RS-22 only), XON/XOFF Speed: 110 bps to 20.4 Kbps Software Features Protocols: ICMP, IP, TCP, UDP, DHCP, BootP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP Utilities: NPort Administrator for Windows 95/98/ME/NT/2000/ XP/200 OS Driver Support: Windows 95/98/ME/NT/2000/XP/200/XP x64/200 x64 COM driver, Linux real TTY driver, SCO Unix, SCO OpenServer 5, UnixWare 7, UnixWare 2.1.x, SVR4.2, QNX Configuration: Web console, serial console (for NPort 5210, 520 only), Telnet console, or Windows utility, (NPort 5210/520) Power Requirements Power Input: 12 to 48 VDC Power Consumption: NPort 5210: 05 12V (max.) NPort 520: V (max.) NPort 522: V (max.) NPort 522I: V (max.) Mechanical Specifications Material: Aluminum (1 mm) Gross Weight: NPort 5210: 20 g NPort 520: 40 g NPort 522: 40 g NPort 522I: 80 g Environment Operating Temperature: 0 to 55 C (2 to 11 F), 5 to 95% RH -40 to 75 C (-40 to 167 F), for wide temperature models Storage Temperature: -20 to 85 C (-4 to 185 F), 5 to 95% RH Regulatory Approvals EMC: CE: EN55022 / EN55024 Class A FCC: FCC Part 15 Subpart B Class A Safety: UL: UL TÜV: EN Medical: EN Class B, EN55011 (NPort 5210) Marine: DNV Warranty: 5 years MTBF: NPort 5210: hours NPort 520: hours NPort 522: hours NPort 522I: 8708 hours info@moxa.com -22

5400 Series 4-port Rackmount Internet Readiness for up to Four Serial Devices Features Easy IP address configuration with LCM (Liquid Crystal Module) Auto-detecting 10/100 Mbps Ethernet 4 ports with

console, and more Supports SNMP MIB-II for network management 2 KV isolation protection for NPort 540I NPort 5400 device servers can conveniently and transparently connect up to four serial devices

By using NPort device servers, you not only protect your current hardware investment, but also allow for future network expansion.

Independent Operation Mode for Each Serial Port NPort 5400 device servers can be used to connect different devices for remote data polling, event handling, or data multicasting over the TCP/IP

24 5400 Series 4-port Rackmount Internet Readiness for up to Four Serial Devices Features Easy IP address configuration with LCM (Liquid Crystal Module) Auto-detecting 10/100 Mbps Ethernet 4 ports with selectable RS-22, RS-422, and RS-485 operation 15 KV ESD surge protection for all serial signals TCP Server, TCP Client, UDP, and Real COM operation modes Configuration by web console, Telnet console, and more Supports SNMP MIB-II for network management 2 KV isolation protection for NPort 540I NPort 5400 device servers can conveniently and transparently connect up to four serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bidirectional. By using NPort device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize management of your serial devices and distribute management hosts over the network. Independent Operation Mode for Each Serial Port NPort 5400 device servers can be used to connect different devices for remote data polling, event handling, or data multicasting over the TCP/IP network. Each serial port on the NPort 5400 device server operates independently, allowing maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports and 4 in TCP client mode. User-Friendly LCD Control Panel for Easy Installation A control panel is provided on NPort 5400 device servers, with four buttons for inputting data, configuration, and selecting the operation mode. The control panel displays the server name, serial number, and IP address, and can be used to enter or modify parameters such as IP address, netmask, or gateway. Redundant DC Power Inputs NPort 5400 device servers supports redundant power sources and provides both a DC terminal block input and a DC power jack input. The two power inputs not only provide power redundancy, but also allow greater flexibility for use with different applications info@moxa.com

Total Solutions for Industrial Device Networking Adjustable Termination and Pull High/Low Resistors In some critical environments, termination resistors may be needed to

When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted.

resistor values for each serial port, using DIP switches.

25 Total Solutions for Industrial Device Networking Adjustable Termination and Pull High/Low Resistors In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, NPort 5400 device servers allow manual adjustment of termination and pull high/low resistor values for each serial port, using DIP switches. DIP Switches on Rear Panel NPort 5410, 540, 5450 Power Input Terminal Block (12 to 48 VDC) Ethernet RJ45 10/100 Mbps Reset Button LEDs LAN and Serial Status LCM Display Panel NPort 5450 NPort 5410 DIN-Rail or Panel mounting Optional DIN-Rail (5 mm) Mounting Kit DB9 (Male) RS-22 RS-422/485 DK-5A NPort 540 DB9 (Male) RS-22/422/485 Push Buttons DB9 (Male) Connector RS-22 with 15 KV ESD Protection

26 Ordering Information NPort 5410: 4-port RS-22 serial device server NPort 540: 4-port RS-422/485 serial device server NPort 540I: NPort 540 with 2 KV isolation NPort 5450: 4-port RS-22/422/485 serial device server NPort 5450I: NPort 5450 with 2 KV isolation Package Checklist 1 NPort 5400 Device Server Quick Installation Guide NPort Document and Software CD-ROM Power Jack to TB Power Cable Optional Accessories DK-5A: DIN-Rail Mounting Kit (5 mm) DIN-Rail Power Supply: See page 12-7 Dimensions (unit = mm) Terminal Block: See page 12-5 Power Adaptor: See page 12-8 O.2 mm (0.1 in) 25 mm (0.98 in) 9 mm (1.54 in) P1 P P 4 Port Device Server P4 10 mm (4.06 in) RESET LAN V+ V- mm (1. in) 5.5 mm (1.4 in ) 158 mm (6.22 in) 169 mm (6.67 in) 158 mm (6.22 in) 169 mm (6.67 in) 181 mm (7.14 in) Pin Assignment NPort 5410 DB9 (Male) RS-22 Port NPort 540/540I Terminal Block RS-422/485 Port RJ45 RS-22 port PIN RS-22 1 DCD (in) 2 RxD (in) TxD (out) 4 DTR (out) 5 GND RS-422/485 Terminal Block Wiring NPort 540/540I Terminal Block T+ T- R+ / D+ R- / D- GND DSR (in) 7 RTS (out) 8 CTS (in) 9 Serial Device Signals Rx+ Rx- Tx+ / Data+ Tx- / Data- GND NPort 5450/5450I DB9 (Male) RS-22/422/485 Port DB9 (Male) RS-22/422/485 Port PIN RS-22 RS-422/485 (4W) RS-485 (2W) 1 DCD TxD-(A) 2 RxD TxD+(B) TxD RxD+(B) Data+(B) 4 DTR RxD-(A) Data-(A) 5 GND GND GND 6 DSR 7 RTS 8 CTS info@moxa.com

27 Total Solutions for Industrial Device Networking Specifications LAN Ethernet: 10/100 Mbps, RJ45 Protection: Built-in 1.5 KV magnetic isolation NPort 5410 Serial Interface Interface: RS-22 No. of Ports: 4 Port Type: DB9 (male) Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Serial Line Protection: 15 KV ESD for all signals NPort 540/540I Serial Interface Interface: RS-422/485 No. of Ports: 4 Port Type: Terminal Block Signals: RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND Serial Line Protection: 15 KV ESD for all signals RS-485 Data Direction: ADDC (Automatic Data Direction Control) NPort 5450/5450I Serial Interface Interface: RS-22/422/485 No. of Ports: 4 Port Type: DB9 (male) Signals: RS-22: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND Serial Line Protection: 15 KV ESD for all signals RS-485 Data Direction: ADDC (Automatic Data Direction Control) Power Line Protection 4 KV burst (EFT), EN KV surge, EN Advanced Built-in Features HMI: LCM display with four push buttons Buzzer Real-Time Clock Watch Dog Timer Serial Communication Parameters Parity: None, Even, Odd, Space, Mark Data Bits: 5, 6, 7, 8 Stop Bit(s): 1, 1.5, 2 Flow Control: RTS/CTS, XON/XOFF, DSR/DTR (excluding NPort 540) Transmission Speed: 50 bps to Kbps Software Features Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, Rtelnet, ARP Utilities: NPort Administrator for Windows 95/98/ME/NT/2000/XP/200/Vista OS Driver Support: Windows 95/98/ME/NT/2000/XP/200/x64 Real COM driver/ Linux real TTY driver/sco Unix/SCO OpenServer 5/ UnixWare 7/UnixWare 2.1/SVR4.2/QNX Configuration: Web console, Telnet console, or Windows utility Power Requirements Power Input: 12 to 48 VDC Power Consumption: NPort 5410: 50 12V (max.) NPort 540: 60 12V (max.) NPort 540I: V (max.) Mechanical Material: SECC sheet metal (1 mm) Dimensions (W H D): mm (including ears) mm (without ears) Gross Weight: NPort 5410: 0.5 kg (1.10 lb) NPort 540: 0.5 kg (1.10 lb) NPort 540I: 0.5 kg (1.10 lb) Environment Operating Temperature: 0 to 55 C (2 to 11 F), 5 to 95%RH Storage Temperature: -20 to 70 C (-4 to 158 F), 5 to 95%RH Regulatory Approvals EMC: FCC Class A, CE Class A Safety: UL, CUL, TÜV Marine: DNV Warranty: 5 years MTBF NPort 5410: hours NPort 540: hours NPort 540I: hours info@moxa.com -26

5600 Series 8 and 16-port Features Internet Readiness for up to 16 Serial Devices Up to 16 ports supporting RS-22, RS-422, or RS-485 operation Compact desktop model or standard 19-inch rackmount

console, and more TCP Server, TCP Client, UDP, and Real COM operation modes Supports SNMP MIB-II for network management NPort 5600 device servers can conveniently and transparently connect up to 16

Compact Desktop Model and Standard 19-inch Rack-Mount Model The NPort 5600 is available in a rackmount model, which has a professional cabinet design, Tx/Rx LEDs for all ports, and RS-22 RJ45

28 5600 Series 8 and 16-port Features Internet Readiness for up to 16 Serial Devices Up to 16 ports supporting RS-22, RS-422, or RS-485 operation Compact desktop model or standard 19-inch rackmount model Auto-detecting 10/100 Mbps Ethernet 15 KV ESD surge protection for all serial signals Easy IP address configuration with LCM (Liquid Crystal Module) Configuration by web console, Telnet console, and more TCP Server, TCP Client, UDP, and Real COM operation modes Supports SNMP MIB-II for network management NPort 5600 device servers can conveniently and transparently connect up to 16 serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize management of your serial devices and distribute management hosts over the network. Compact Desktop Model and Standard 19-inch Rack-Mount Model The NPort 5600 is available in a rackmount model, which has a professional cabinet design, Tx/Rx LEDs for all ports, and RS-22 RJ45 connectors. The rackmount model is suitable for mounting on a standard 19-inch rack, simplifying operation, maintenance, and administration. The NPort 5600 is also available in a compact desktop model, the NPort DT. The desktop model's most obvious benefit is its small size--it is only one-fourth the size of the rackmount model. With its small size, the desktop model can be mounted on a DIN-rail, wall, or desktop. 19 Rackmount Model Desktop Model Adjustable Termination and Pull High/Low Resistors In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, NPort 5600 device servers allow manual adjustment of termination and pull high/ low resistor values for each serial port, using DIP switches info@moxa.com

Total Solutions for Industrial Device Networking DIP Switches for NPort 5600 DIP Switches for NPort 5600-8-DT NPort

Mbps Serial Ports NPort 5610: RJ45, RS-22, 50 bps to 921.6 Kbps NPort 560: RJ45, RS-422/485, 50 bps to 921.

6 Kbps Mounting Plate Reset Button LCM Display Panel Push Buttons LED Indicators System Status, Serial Tx/Rx

Push Buttoms Ethernet Switch RJ45 10/100 Mbps Power Input Both power Jack and Terminal block 12-48VDC RS-22 Console

29 Total Solutions for Industrial Device Networking DIP Switches for NPort 5600 DIP Switches for NPort DT NPort 5600, Rackmount Model Appearance AC Power Input 100 to 240 VAC Input, 47 to 6 HZ AC Power Switch Ethernet RJ45 10/100 Mbps Serial Ports NPort 5610: RJ45, RS-22, 50 bps to Kbps NPort 560: RJ45, RS-422/485, 50 bps to Kbps NPort 5650: RJ45, RS-22/422/485, 50 bps to Kbps Mounting Plate Reset Button LCM Display Panel Push Buttons LED Indicators System Status, Serial Tx/Rx Connection Cable RJ45 to DB9 Cable (Optional Accessory) NPort 5600, Desktop Model LCM Display Panel LED Indicators Push Buttoms Ethernet Switch RJ45 10/100 Mbps Power Input Both power Jack and Terminal block 12-48VDC RS-22 Console Port Reset Buttom Serial Ports NPort DT: DB9, RS-22 NPort DT: DB9, RS-22/422/485 NPort DT-J: RJ45, RS-22 NPort DT-J: RJ45, RS-22/422/ info@moxa.com -28

30 Ordering Information NPort DT: 8-port RS-22 serial device server, DB9 connector, desktop model NPort DT-J: 8-port RS-22 serial device server, RJ45 connector, desktop model NPort : 8-port RS-22 serial device server, VAC power input NPort V: 8-port RS-22 serial device server, 48 VDC power input NPort 560-8: 8-port RS-422/485 serial device server, VAC power input NPort DT: 8-port RS-22/422/485 serial device server, VAC power input, desktop model NPort 5650I-8-DT: NPort DT with 2 KV isolation NPort DT-J: 8-port RS-22/422/485 serial device server, RJ45 connector, desktop model NPort : 8-port RS-22/422/485 to Ethernet secure device server, VAC input NPort M-SC: 8-port RS-22/422/485 serial device server, 10/100BaseF(X), multi mode fiber (SC connector) NPort S-SC: 8-port RS-22/422/485 serial device server, 10/100BaseF(X), single mode fiber (SC connector) NPort : 16-port RS-22 serial device server, VAC power input NPort V: 16-port RS-22 serial device server, 48 VDC power input NPort : 16-port RS-422/485 serial device server, VAC power input NPort : 16-port RS-22/422/485 to Ethernet secure device server, VAC power input NPort M-SC : 16-port RS-22/422/485 serial device server, 10/100BaseF(X), multi mode fiber (SC connector) NPort S-SC: 16-port RS-22/422/485 serial device server, 10/100BaseF(X), single mode fiber (SC connector) Package Checklist Optional Accessories 1 NPort 5600 Device Server Power Cord: See page Quick Installation Guide Serial Cable & Serial Adaptor: See page 12-4 Document and Software CD ROM Power Cord (AC Model Only) Power Adaptor (Desktop Model Only) Dimensions (unit = mm / Rackmount Model) mm (7.8 in) AC POWER V, 47-6Hz LA N 45 mm (1.77 in) Serial ports mm (17. in) 480 mm (19 in) info@moxa.com

31 Total Solutions for Industrial Device Networking Dimensions (unit = mm / Desktop Model) 5650-B-DT 125 mm 50 mm 25 mm 44 mm 197 mm 209 mm 229 mm Pin Assignment NPort 5610 RJ45 RS-22 Port NPort 560 RJ45 RS-422/485 Port NPort 5650 RJ45 RS-22/422/485 Port PIN RS-22 1 DSR (in) 2 RTS (out) GND 4 TxD (out) 5 RxD (in) 6 DCD (in) 7 CTS (in) 8 DTR (out) PIN RS-422/485 (4W) RS-485 (2W) TxD TxD RxD- Data+ 6 RxD+ Data- 7 GND GND PIN RS-22 RS-422/485 (4W) RS-485 (2W) 1 DSR (in) RTS (out) TxD+ --- GND GND GND 4 TxD (out) TxD RxD (in) RxD+ Data+ 6 DCD (in) RxD- Data- 7 CTS (in) DTR (out) NPort DT NPort DT / NPort 5650I-8-DT PIN RS-22 1 DCD 2 RxD TxD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS PIN RS-22 RS-422/485 (4W) RS-485 (2W) 1 DCD TxD-(A) 2 RxD TxD+(B) TxD RxD+(B) Data+(B) 4 DTR RxD-(A) Data-(A) 5 GND GND GND 6 DSR 7 RTS 8 CTS info@moxa.com -0

32 Specifications LAN Ethernet: 10/100 Mbps, RJ45 Protection: Built-in 1.5 KV magnetic isolation Optical Fiber Distance: Multi mode: 0 to 2 km, 110 nm (62.5/125 µm, 500 MHz*km) Single mode: 0 to 40 km, 110 nm (9/125 µm,.5 PS/(nm*km)) Min. TX Output: Multi mode: -20 dbm Single mode: 0 to 40 km, -5 dbm Max. TX Output: Multi mode: -14 dbm Single mode: 0 to 40 km, 0 dbm Sensitivity: -6 to -2 dbm (single), -4 to -0 dbm (multi) NPort 5610 Serial Interface Interface: RS-22 No. of Ports: 8 or 16, depending on model Port Type: RJ45 (8-pin) or DB9 (male for DT model) Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Serial Line Protection: 15 KV ESD for all signals NPort 560 Serial Interface Interface: RS-422/485 No. of Ports: 8 or 16, depending on model Port Type: RJ45 (8-pin) Signals: RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND Serial Line Protection: 15 KV ESD for all signals RS-485 Data Direction: ADDC (Automatic Data Direction Control) NPort 5650 Serial Interface Interface: RS-22/422/485 No. of Ports: 8 or 16, depending on model Port Type: RJ45 or DB9 (male) for DT model Signals: RS-22: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND Serial Line Protection: 15 KV ESD for all signals RS-485 Data Direction: ADDC (Automatic Data Direction Control) Power Line Protection 4 KV burst (EFT), EN KV surge, EN Advanced Built-in Features HMI: LCM display with four push buttons Buzzer Real-Time Clock Watchdog Timer Serial Communication Parameters Parity: None, Even, Odd, Space, Mark Data Bits: 5, 6, 7, 8 Stop Bit(s): 1, 1.5, 2 Flow Control: RTS/CTS, XON/XOFF, DSR/DTR (only for RS-22) Transmission Speed: 50 bps to Kbps Software Features Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, Rtelnet, ARP, PPP, RFC2217 Utilities: NPort Administrator for Windows 95/98/ME/NT/2000/XP/200/Vista OS Driver Support: Windows 95/98/ME/NT/2000//XP/200/x64 Real COM driver/ Linux Real TTY driver/sco Unix/SCO OpenServer 5/UnixWare7/ UnixWare 2.1/SVR4.2/QNX Configuration: Web console, Telnet Console, or Windows utility info@moxa.com

33 Total Solutions for Industrial Device Networking Power Requirements Power Input: Rackmount model: 100 to 240 VAC/VDC or ±48 VDC Desktop model: 12 to 48 VDC Power Consumption: NPort /8: 141 ma for 100V, 9 ma for 240V NPort /8-48V: 15 48V (max.) NPort /8: 152 ma for 100V, 98 ma for 240V NPort /16: VAC, VAC NPort 5650-S-SC-8/16: VAC, VAC NPort 5650-M-SC-8/16: VAC, VAC Mechanical Material: SECC sheet metal (1 mm) Dimensions (W H D): mm (including ears) mm (without ears) Gross Weight: NPort : 40 g MTBF NPort : hours NPort : hours NPort V: hours NPort V: hours NPort 560-8: hours NPort : 9148 hours NPort : hours NPort : hours NPort 5650-S-SC-8: hours NPort 5650-S-SC-16: hours NPort 5650-M-SC-8: hours NPort 5650-M-SC-16: hours NPort : 420 g NPort V: 160 g NPort V: 260 g NPort 560-8: 80 g NPort : 400 g NPort : 60 g NPort : 460 g NPort 5650-S-SC-8: 80 g NPort 5650-S-SC-16: 440 g NPort 5650-M-SC-8: 80 g NPort 5650-M-SC-16: 440 g Environment Operating Temperature: 0 to 55 C (2 to 11 F), 5 to 95%RH Storage Temperature: -20 to 70 C (-4 to 158 F), 5 to 95%RH Regulatory Approvals EMC: FCC Class A, CE Class A Safety: UL, CUL, TÜV Warranty: 5 years info@moxa.com -2

DE-11 and DE-211 Make Your Serial Device Internet Ready Ordering Information NPort DE-11 NPort DE-211 DE-11: 10/100 Mbps, 1-port RS-22/422/485 serial device server DE-211: 10 Mbps, 1-port

Pair Connection Real COM/TTY drivers for Windows and Linux Fast and standard Ethernet support 2 or 4-wire RS-485 with patented Automatic Data Direction Control (ADDC ) Built-in 15 KV ESD protection

34 DE-11 and DE-211 Make Your Serial Device Internet Ready Ordering Information NPort DE-11 NPort DE-211 DE-11: 10/100 Mbps, 1-port RS-22/422/485 serial device server DE-211: 10 Mbps, 1-port RS-22/422/485 serial device server Features -in-1 serial port with selectable RS-22, RS-422, and RS-485 operation Versatile operation modes including TCP Server, TCP Client, UDP, Ethernet Modem, and Pair Connection Real COM/TTY drivers for Windows and Linux Fast and standard Ethernet support 2 or 4-wire RS-485 with patented Automatic Data Direction Control (ADDC ) Built-in 15 KV ESD protection for all serial signals Package Checklist 1 Device Server Quick Installation Guide NPort Document and Software CD-ROM Optional Accessories DK-5A NP21101: DB25 (Male) to DB9 (Female) RS-22 Cable, 0 cm NP21102: DB25 (Male) to DB9 (Male) RS-22 Cable, 0 cm NP2110: DB25 (Male) Terminal Block Kit for RS-422/485 Pin Assignment DE-11 DE-211 DB9 RS-22/422/485 Port DB25 RS-22/422/485 Port PIN RS-22 RS-422 RS-485 (2W) 1 DCD RxD-(A) TxD RxD+(B) ---- RxD TxD+(B) Data+(B) 4 DSR TxD-(A) Data-(A) 5 GND GND GND 6 DTR CTS-(A) CTS CTS+(B) RTS RTS+(B) RTS-(A) RXDA(-) / DataA(-) RXDB(+) / DataB(-) DSR (in) 20 TXDA (-) 15 TXDB (+) 14 1 Power GND for 12-0 VDC 12 Unreg VDC (in) 10 Power GND for 5 VDC 9 Reg. +5 VDC (out) 8 DCD (in) 7 SGND 6 DTR (out) 5 RTS (out) 4 CTS (in) TxD (out) 2 RxD (in) 1 Do not use this pin* * This pin is reserved for debugging only. Connecting this pin may cause irreparable damage to your device info@moxa.com

35 Total Solutions for Industrial Device Networking Dimensions (unit = mm) NPort DE-11 NPort DE mm (0.87 in) ON DIP mm (0.87 in) 22.0 mm (0.87 in) 22.0 mm (0.87 in) DC-IN RESET 10/100M Ethernet O 6 mm (0.24 in) DC-IN SW RESET 10BaseT Ethernet O 6 mm (0.24 in) PWR Link O 4 mm (0.16 in) PWR Link O 4 mm (0.16 in) Ready Ready Serial Tx mm (.95 in) Express DE-11 RS-22/422/485 Device Server 12.5 mm (0.49 in) 25 mm (0.98 in) mm (.95 in) Serial Rx Express DE-211 RS-22/422/485 Device Server 12.5 mm (0.49 in) 25 mm (0.98 in) 21. mm (0.8 in) SW1 ON OFF Serial Connection Console (19200,N,8,1) Data Comm. SW2 OFF OFF ON ON SW OFF ON OFF ON Interface Mode RS-22 RS-22 RS-422 RS-485 by RTS RS-485 ADDC O 7 mm (0.28 in 21. mm (0.8 in) SW1 ON OFF Serial Connection RS-22 Console Data Comm SW2 OFF OFF ON ON ON ON SW OFF ON OFF ON OFF ON SW4 OFF ON ON ON OFF OFF Serial Interface Mode RS-22 RS Wire RS-485 by RTS 4-Wire RS-485 by ADDC 2-Wire RS-485 by RTS 4-Wire RS-485 by ADDC O 7 mm (0.28 in) 42. mm (1.67 in) Specifications Serial 67.0 mm (2.64 in) 78 mm (.07 in) 90.2 mm (.55 in) SW ON mm (0.87 in) 42. mm (1.67 in) Serial 67.0 mm (2.64 in) 78 mm (.07 in) 90.2 mm (.55 in) 22.0 mm (0.87 in) LAN Ethernet: DE-11: 10/100 Mbps, RJ45 DE-211: 10 Mbps, RJ45 Protection: Built-in 1.5 KV magnetic isolation Serial Interface: 1 RS-22/422/485 port DE-11: DB9 (Female), DE-211: DB25 (Female) RS-22 Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422 Signals: Tx+, Tx-, Rx+, Rx-, RTS+, RTS-, CTS+, CTS-, GND RS-485 (2-wire) Signals: Data+, Data-, GND RS-485 (4-wire) Signals: Tx+, Tx-, Rx+, Rx-, GND Serial Line Protection: 15 KV ESD for all signals RS-485 Data Direction: Patented Automatic Data Direction Control (ADDC ) Serial Communication Parameters Parity: None, Even, Odd, Space, Mark Data Bits: 5, 6, 7, 8 Stop Bit(s): 1, 1.5, 2 Flow Control: RTS/CTS, XON/XOFF Speed: 50 bps to 20.4 Kbps Software Features Protocols: DHCP, BootP, Telnet, TCP, UDP, IP, ICMP, ARP Utilities: NPort Management Suite for Windows 95/98/ME/NT/2000/ XP/200 OS Driver Support: Windows 95/98/ME/NT/2000/XP/200/XP x64/200 x64 COM driver, Linux Real TTY driver, SCO Unix, SCO OpenServer 5, UnixWare 7, UnixWare 2.1.x, SVR4.2, QNX Configuration: Telnet console, serial console, Windows utility Power Requirements Power Input: DE-11: 9 to 0 VDC DE-211: 12 to 0 VDC Power Consumption: DE-11: 00 9V (max.) DE-211: V (max.) Mechanical Specifications Material: SECC sheet metal (1 mm) Gross Weight: DE-11: 720 g DE-211: 720 g Environment Operating Temperature: 0 to 70 C (2 to 11 F), 5 to 95% RH Storage Temperature: -20 to 85 C (-4 to 185 F), 95% RH Regulatory Approvals EMC: CE: EN55022/EN55024 Class B FCC: FCC Part 15 Subpart B Safety: UL: UL60950 TÜV: EN60950 Medical: EN Class B, EN55011 (DE-11) Warranty: 5 years MTBF DE-11: hours DE-211: hours info@moxa.com -4

IA for Industrial Applications Features NPort IA serial device servers connect traditional

Each NPort IA model possesses both industrial certification and IP0 anti-dust certification.

The NPort IA line supports a complete set of operation modes, including Real COM, Real TTY, TCP

NPort IA Family Model Serial Interface RJ45 Ethernet Interface Fiber (SC) Isolation NPort IA5150 1

isolation NPort IA5150-M-SC 1 port: RS-22 (DB9) or RS-422/485 (TB) 1 multi mode NPort IA5150I-M-SC

(DB9) or RS-422/485 (TB) 1 single mode NPort IA5150I-S-SC 1 port: RS-22 (DB9)or RS-422/485 (TB) 1

36 IA for Industrial Applications Features NPort IA serial device servers connect traditional RS-22/422/485 devices to Ethernet and are designed specifically for industrial applications. Each NPort IA model possesses both industrial certification and IP0 anti-dust certification. All models are offered in standard and wide temperature versions. The NPort IA line supports a complete set of operation modes, including Real COM, Real TTY, TCP Server, TCP Client, UDP, and Pair Connection. NPort IA Family Model Serial Interface RJ45 Ethernet Interface Fiber (SC) Isolation NPort IA port: RS-22 (DB9) or RS-422/485 (TB) 2 NPort IA5150I 1 port: RS-22 (DB9) or RS-422/485 (TB) 2 2 KV isolation NPort IA5150-M-SC 1 port: RS-22 (DB9) or RS-422/485 (TB) 1 multi mode NPort IA5150I-M-SC 1 port: RS-22 (DB9) or RS-422/485 (TB) 1 multi mode 2 KV isolation NPort IA5150-S-SC 1 port: RS-22 (DB9) or RS-422/485 (TB) 1 single mode NPort IA5150I-S-SC 1 port: RS-22 (DB9)or RS-422/485 (TB) 1 single mode 2 KV isolation NPort IA ports: RS-22/422/485 (DB9) 2 Typical Applications Factory Automation Petrochemical Processing Utilities Transportation info@moxa.com

Total Solutions for Industrial Device Networking Redundant Power Inputs NPort IA5000 series device servers have two power inputs that can be connected simultaneously to live DC power sources.

Dual Power Inputs Power Failure Alarm Relay Output Warning and E-mail Alerts The built-in relay output can be used to alert administrators of problems with the Ethernet links or power inputs, with

These functions are valuable tools that enable maintenance engineers to react promptly to emergency situations.

37 Total Solutions for Industrial Device Networking Redundant Power Inputs NPort IA5000 series device servers have two power inputs that can be connected simultaneously to live DC power sources. If one power source fails, the other source takes over automatically. Redundant power inputs help assure non-stop operation of your device server. Dual Power Inputs Power Failure Alarm Relay Output Warning and Alerts The built-in relay output can be used to alert administrators of problems with the Ethernet links or power inputs, with the web console indicating which Ethernet link or power input has failed. An warning can also be issued when an exception is detected. These functions are valuable tools that enable maintenance engineers to react promptly to emergency situations. Fiber for Ethernet Communication 100BaseFX fiber models of the NPort IA5000 device server are available, supporting transmission distances up to 2 km for multimode models and up to 40 km for single-mode models. Optical fiber is well-suited for industrial applications because it is immune to electromagnetic noise and interference. For environments that experience high ground loop voltages, fiber provides the best isolation protection. Since there is no danger of sparks being created with fiber optic media, it is also safer to use in hazardous environments than copper wire. Industrial Grade Certification To ensure safe and reliable operation in industrial environments, the NPort IA5000 device server has obtained various industrial certifications, including the IP0 rating for mechanical protection, UL508 safety certification for industrial control equipment, and explosion-safe certifications for hazardous locations including UL/cUL Class 1, Division II, Groups A, B, C, D and ATEX Class 1, Zone info@moxa.com -6

38 NPort IA Serial Device Server Selection Guide Model Name NPort IA5150 NPort IA5150I NPort IA5150-M-SC LAN Serial Interface Software Features Operation Modes Advanced Built-in Features Power Input Mechanical Environment Regulatory Approvals Warranty Ethernet (10/100BaseTX) Connector RJ45 RJ45 SC Fiber (100BaseFX) Multi-Mode Cascading Capability 1.5 KV Magnetic Isolation RS-22/422/485 1 port 1 port 1 port Connector Type Male DB9 (RS-22); 5-pin Terminal Block (RS-422/485) Male DB9 (RS-22); 5-pin Terminal Block (RS-422/485) Male DB9 (RS-22); 5-pin Terminal Block (RS-422/485) Speed 110 bps to 20.4 Kbps 110 bps to 20.4 Kbps 110 bps to 20.4 Kbps Communication Parameters Parity: None, Even, Odd, Space, Mark; Data Bits: 5, 6, 7, 8; Stop Bit(s): 1, 1.5, 2 Flow Control (RTC/CTS/ XON/XOFF) Serial Console (RS-22) 2 KV Serial Line Isolation 15 KV ESD Protection Patented ADDC Protocols Utilities OS Driver Support Configuration Power Input ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP NPort Administration Suite for Windows 95/98/ME/NT/2000/XP/200 Windows 95/98/ME/NT/2000/XP/200/XP x64/200 x64 COM driver, Linux Real TTY driver, Unix Web/Serial/Telnet Console, or Windows Utility Real COM, TCP Server, TCP Client, UDP, Pair Connection, Ethernet Modem, Reverse Telnet, Disabled Mode Buzzer, Real-Time Clock, Watchdog Timer, Relay Out 12 to 48 VDC Redundant Power Input Power Consumption 60 12V (max.) V (max.) V (max.) Casing: PC (Polycarbonate, 2 mm) Dimensions (W H D) 29 x 89.2 x mm (1.14 x.51 x 4.66 in) 29 x 89.2 x mm (1.14 x.51 x 4.66 in) 29 x 89.2 x mm (1.14 x.51 x 4.66 in) IP0 Protection DIN-Rail/Wall Mountable Operating Temperature 0 to 55 C (2 to 11 F), 5 to 95% RH Storage Temperature -20 to 85 C (-40 to 185 F) Safety EMC UL UL , UL 508, TÜV EN FCC Part 15, Subpart B, Class A, CE EN55022 Class A, CE EN55024 Hazardous location UL/cUL Class 1, Division 2, Groups A, B, C, and D; ATEX Class 1, Zone 2 Shock Freefall Vibration IEC IEC IEC EN (ESD) Level EN (EFT) Level 4 EN (Surge) Level EN (RS) Level EN (CS) Level EN EN EN DNV Passed Passed Passed 5 years info@moxa.com

39 Total Solutions for Industrial Device Networking Model Name LAN Serial Interface Software Features Operation Modes Advanced Built-in Features Power Input Mechanical Environment Regulatory Approvals Warranty Ethernet (10/100BaseTX) Connector Fiber (100BaseFX) Cascading Capability 1.5 KV Magnetic Isolation RS-22/422/485 Connector Type Speed Communication Parameters Flow Control (RTC/CTS/ XON/XOFF) Serial Console (RS-22) 2 KV Serial Line Isolation 15 KV ESD Protection Patented ADDC Protocols Utilities OS Driver Support Configuration Power Input Redundant Power Input Power Consumption Casing: PC (Polycarbonate, 2 mm) Dimensions (W H D) IP0 Protection DIN-Rail/Wall Mountable Operating Temperature Storage Temperature Safety EMC Hazardous location Shock Freefall Vibration EN (ESD) EN (EFT) EN (Surge) EN (RS) EN (CS) EN EN EN DNV NPort IA5150I-M-SC NPort IA5150-S-SC NPort IA5150I- S-SC NPort IA5250 SC SC SC RJ45 Multi-Mode Single-Mode Single-Mode 1 port 1 port 1 port 2 ports Male DB9 (RS-22); 5-pin Terminal Block (RS-422/485) Male DB9 (RS-22); 5-pin Terminal Block (RS-422/485) Male DB9 (RS-22); 5-pin Terminal Block (RS-422/485) Male DB9 (RS-22/422/485) 110 bps to 20.4 Kbps 110 bps to 20.4 Kbps 110 bps to 20.4 Kbps 110 bps to 20.4 Kbps Parity: None, Even, Odd, Space, Mark; Data Bits: 5, 6, 7, 8; Stop Bit(s): 1, 1.5, 2 ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP NPort Administration Suite for Windows 95/98/ME/NT/2000/XP/200 Windows 95/98/ME/NT/2000/XP/200/XP x64/200 x64 COM driver, Linux Real TTY driver, Unix Web console, serial console, Telnet console, or Windows utility Real COM, TCP Server, TCP Client, UDP, Pair Connection, Ethernet Modem, Reverse Telnet, Disabled Mode Buzzer, Real-Time Clock, Watchdog Timer, Relay Out 12 to 48 VDC V (max.) V (max.) V (max.) 90 12V (max.) 29 x 89.2 x mm (1.14 x.51 x 4.66 in) 29 x 89.2 x mm (1.14 x.51 x 4.66 in) 29 x 89.2 x mm (1.14 x.51 x 4.66 in) 29 x 89.2 x mm (1.14 x.51 x 4.66 in) 0 to 55 C (2 to 11 F), 5 to 95% RH -40 to 85 C (-40 to 185 F) UL UL , UL 508, TÜV EN FCC Part 15, Subpart B, Class A, CE EN55022 Class A, CE EN55024 UL/cUL Class 1, Division 2, Groups A, B, C, and D, ATEX Class 1, Zone 2 IEC IEC IEC Level Level 4 Level Level Level Passed Passed Passed 5 years info@moxa.com -8

1 and 2-port for Industrial Automation Overview IA Series Features Makes serial devices Internet ready Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real Com driver 2

10/100BaseTX (RJ45) or 100BaseFX (single or multi-mode SC connector) IP0-rated case NPort IA device servers provide easy and reliable serial-to-ethernet connectivity for industrial automation.

The rock-solid reliability of NPort IA device servers makes them an ideal choice for establishing network access to RS-22/422/485 serial devices such as PLCs, sensors, meters, motors, drives,

Cascading Ethernet Ports for Easy Wiring (RJ45 Only) Two Ethernet Ports for Easy Wiring The NPort IA5150 and IA5250 each have two Ethernet ports that can be used as Ethernet switch ports.

40 1 and 2-port for Industrial Automation Overview IA Series Features Makes serial devices Internet ready Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real Com driver 2 or 4-wire RS-485 with patented Automatic Data Direction Control (ADDC ) Cascading Ethernet ports for easy wiring (RJ45 only) Redundant DC power inputs Warning by relay output and 10/100BaseTX (RJ45) or 100BaseFX (single or multi-mode SC connector) IP0-rated case NPort IA device servers provide easy and reliable serial-to-ethernet connectivity for industrial automation. They can connect any serial device to an Ethernet network and offer various port operation modes, such as TCP Server, TCP Client, and UDP mode, to ensure compatibility with network software. The rock-solid reliability of NPort IA device servers makes them an ideal choice for establishing network access to RS-22/422/485 serial devices such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. All models are housed in a compact, rugged casing that can be mounted on a DIN-rail. Cascading Ethernet Ports for Easy Wiring (RJ45 Only) Two Ethernet Ports for Easy Wiring The NPort IA5150 and IA5250 each have two Ethernet ports that can be used as Ethernet switch ports. While one port connects to the network or server, the other port can be used to connect another NPort IA device server or another Ethernet device. The dual Ethernet ports eliminate the need to connect each device to a separate Ethernet switch, reducing wiring costs info@moxa.com

41 Total Solutions for Industrial Device Networking Redundant Power Inputs NPort IA5000 series device servers have two power inputs that can be connected simultaneously to live DC power sources. If one power source fails, the other source takes over automatically. Redundant power inputs help assure non-stop operation of your device server. Warning by Relay Output and The built-in relay output can be used to alert administrators of problems with the Ethernet links or power inputs, with the web console indicating which Ethernet link or power input has failed. An warning can also be issued when an exception is detected. These functions are valuable tools that enable maintenance engineers to react promptly to emergency situations. Appearance LED Indicators Reset Reset Dual Power Input and Relay Output Copper Ethernet Fiber optic Ethernet RS-22 RS-422/485 RS-22/422/485 1-port 2-port Ordering Information NPort IA5150: 1-port RS-22/422/485 serial device server, 2 x 10/100BaseT(X) (RJ45, single IP) NPort IA5150-T: NPort IA5150, -40 to 75 C operating temperature NPort IA5150I: 1-port RS-22/422/485 serial device server with 2 KV isolation, 2 x 10/100BaseT(X) (RJ45, single IP) NPort IA5150I-T: NPort IA5150I, -40 to 75 C operating temperature NPort IA5150-M-SC: 1-port RS-22/422/485 serial device server, 2 x 10/100BaseF(X), multi mode fiber (SC connector) NPort IA5150-M-SC-T: NPort IA5150-M-SC, -40 to 75 C operation temperature NPort IA5150I-M-SC: NPort IA5150-M-SC with 2 KV isolation NPort IA5150I-M-SC-T: NPort IA5150-M-SC with 2 KV isolation, -40 to 75 C operation temperature NPort IA5150-S-SC: 1-port RS-22/422/485 serial device server, 2 x 10/100BaseF(X), single mode fiber (SC connector) NPort IA5150-S-SC-T: NPort IA5150-S-SC, -40 to 75 C operation temperature NPort IA5150I-S-SC: NPort IA5150-S-SC with 2 KV isolation NPort IA5150I-S-SC-T: NPort IA5150-S-SC with 2 KV isolation, -40 to 75 C operation temperature NPort IA5250: 2-port RS-22/422/485 serial device server, 2 x 10/100BaseT(X) (RJ45, Single IP) NPort IA5250-T: NPort IA5250, -40 to 75 C operation temperature Package Checklist Optional Accessories 1 NPort IA Serial Device Server DIN Rail Power Supply: See page 12-7 Quick Installation Guide Optical Fiber Patch Cord: See page NPort Document and Software CD-ROM Terminal Block: See page 12-5 Power Jack to TB Power Cable: See page info@moxa.com -40

42 Dimensions (unit = mm) NPort IA5150 NPort IA5150I NPort IA mm (1.14 in) 14.5 mm (0.57 in) NPort IA5150I-S-SC NPort IA5150I-M-SC NPort IA5150-S-SC NPort IA5150-M-SC 29 mm (1.14 in) 14.5 mm (0.57 in) 11.5 mm (0.45 in) 20.6 mm (0.81 in) mm (1.18 in) 89.2 mm (.51 in) 14.5 mm (0.57 in) 25.9 mm (1.02 in) 5 mm (1.8 in) 69.5 mm (2.74 in) 20 mm (0.79 in) NPort IA5150 NPort IA5150I NPort IA5150-S-SC NPort IA5150-M-SC NPort IA5150I-S-SC NPort IA5150I-M-SC 66.6 mm (2.62 in) 79.5 mm (.1 in) 92.4 mm (.64 in) 25.9 mm (1.02 in) mm (4.67 in) 5 mm (1.8 in) mm (4.9 in) NPort IA5250 Pin Assignment RS-22/422/485 DB9 (Male) Port RS-422/485 Terminal Block Wiring PIN RS-22 RS-485 (4W) RS-485 (2W) RS DCD TxD-(A) TxD-(A) 2 RXD TxD+(B) TxD+(B) TXD RxD+(B) Data+(B) RxD+(B) 4 DTR RxD-(A) Data-(A) RxD-(A) 5 GND GND GND GND 6 DSR 7 RTS 8 CTS PIN RS-485 (4W) RS-485 (2W) RS TxD+(B) TxD+(B) 2 TxD-(A) TxD-(A) RxD+(B) Data+(B) RxD+(B) 4 RxD-(A) Data-(A) RxD-(A) 5 GND GND GND info@moxa.com

43 Total Solutions for Industrial Device Networking Specifications LAN NPort IA5150-M-SC/5150I-M-SC/5150-S-SC/5150I-S-SC Fiber Ports: 1 100BaseFX port, SC connector NPort IA5150/5150I/5250 Ethernet Switch Ports: 2 10/100BaseT(X) ports, RJ45 connector Protection: Built-in 1.5 KV magnetic isolation Optical Fiber Distance: Multi mode: 0 to 2 km, 110 nm (62.5/125 μm, 500 MHz*km) Single mode: 0 to 40 km, 110 nm (9/125 μm,.5 PS/(nm*km)) Min. TX Output: Multi mode: -20 dbm Single mode: 0 to 40 km, -5 dbm Max. TX Output: Multi mode: -14 dbm Single mode: 0 to 40 km, 0 dbm Sensitivity: Multi mode: -4 to -0 dbm Single mode: -6 to -2 dbm Serial NPort IA5150 Interface: 1 RS-22/422/485 port (male DB9 for RS-22, 5-pin terminal block for RS-422/485) RS-22 Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND RS-485 Data Direction: Patented Automatic Data Direction Control (ADDC ) Isolation: 2 KV for NPort IA5150I, IA5150I-M-SC, IA5150I-S-SC Serial Line Protection: 15 KV ESD for all signals NPort IA5250 Interface: 2 RS-22/422/485 ports, DB9 (male) RS-22 Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485 (2-wire): Data+, Data-, GND RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND RS-485 Data Direction: Patented Automatic Data Direction Control (ADDC ) Serial Line Protection: 15 KV ESD for all signals Serial Communication Parameters Parity: None, Even, Odd, Space, Mark Data Bits: 5, 6, 7, 8 Stop Bit(s): 1, 1.5, 2 Flow Control: RTS/CTS (for RS-22 port only), XON/XOFF Speed: 110 bps to 20.4 Kbps Software Features Protocols: ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP, HTTP, SMTP, SNTP Utilities: NPort Administrator for Windows 95/98/ME/NT/ 2000/XP/200 OS Driver Support: Windows 95/98/ME/NT/2000/XP/200/XP x64/200 x64 COM driver, Linux real TTY driver, Unix Configuration: Web console, serial console, Telnet console, or Windows utility Power Requirements Power Input: 12 to 48 VDC Power Consumption: NPort IA5150: 60 12V (max.) NPort IA5150I: V (max.) NPort IA5250: V (max.) NPort IA5150-S-SC: V (max.) NPort IA5150I-S-SC: V (max.) NPort IA5150-M-SC: V (max.) NPort IA5150I-M-SC: V (max.) Mechanical Specifications Casing: IP0 protection Dimensions (W H D): 29 x 89.2 x mm Gross Weight: NPort IA5150: 60g NPort IA5250: 80g Environmental Operating Temperature: 0 to 55 C (2 to 11 F), 5 to 95% RH -40 to 75 C (-40 to 167 F) for wide temperature models Storage Temperature: -20 to 85 C (-4 to 185 F), 5 to 95% RH Regulatory Approvals Safety: UL60950 (E21260), UL 508, CSA C22.2 No , EN60950 Hazardous location: UL/cUL Class I, Division 2, Groups A, B, C and D (E28559) (pending) ATEX Class I, Zone 2, EEx nc IIC (0CA2457) (pending) Marine: DNV EMI: FCC Part 15, CISPR (EN55022) class A, EMS: EN (ESD), Level EN (RS), Level EN (EFT), Level 4 EN (Surge), Level EN (CS), Level EN EN EN Shock: IEC Freefall: IEC Vibration: IEC Dust-proof: IP0 Warranty: 5 years MTBF: NPort IA5150, IA5150I: hrs NPort IA5150I-M-SC: hrs NPort IA5250: hours info@moxa.com -42

Embedded Device Servers Build Network Connectivity into Your Serial Device Powerful, User-Friendly Utilities Configure and Manage Embedded Device Servers with MOXA s Windows Utility MOXA s Network

Building network connectivity into a product is not a simple job. Why build it from scratch yourself when we can provide you with a ready-to-go module?

All the functions that are needed for advanced device networking are included in each embedded device server.

44 Embedded Device Servers Build Network Connectivity into Your Serial Device Powerful, User-Friendly Utilities Configure and Manage Embedded Device Servers with MOXA s Windows Utility MOXA s Network Enabler series of embedded device servers are designed for manufacturers who want to add Ethernet and IP network connectivity to their products. Building network connectivity into a product is not a simple job. Why build it from scratch yourself when we can provide you with a ready-to-go module? Any device that has serial communication capability (RS- 22/422/485, TTL) can use a MOXA embedded device server to connect to an Ethernet network or the Internet. All the functions that are needed for advanced device networking are included in each embedded device server. Network Enabler Administrator is a powerful, Windows-based configuration and management tool for NE-4100 embedded device servers. Over the network, users can modify the IP address, update communication parameters, and configure all other settings. The utility has the following useful features: Network Enabler Administrator Search for embedded device servers on the network Export/import configuration parameters Upgrade firmware over the network Remotely monitor data traffic, serial line status, and TCP/IP connections Configure SNMP, alerts System log for cold boot, warm boot, etc. Search for installed embedded device servers Remotely configure serial, network, alarm, and other parameters Web-based Configuration In addition to the Windows utility, NE-4100 embedded device servers can be configured through the web console, which can be accessed from any networked computer with a web browser info@moxa.com

45 Total Solutions for Industrial Device Networking Embedded Device Server Selection Guide Model Name NE-4110S NE-4110A NE-4120S NE-4120A NE-4100T WE-2100T Available with Command Mode Form Factor LAN WLAN Serial Interface Software Features Operation Modes Advanced Built-in Features Power Environment Regulatory Approvals Typical Installation Examples Stand-alone Type RJ45 Ethernet Pin-Header Ethernet Drop-in Type Dual-in-Line Pin Header Dual-in-Line Pin Header Ethernet 10/100M 10/100M 10/100M 10/100M Connector RJ45 5-pin Pin-Header 26-pin Dual-in-Line 44-pin Dual-in-Line 1.5 KV Magnetic Isolation Standard Compliance IEEE a/b/g Radio Frequency Type DSSS, CCK, OFDM Wireless Security WEP, WPA, WPA2, i Network Mode Port 1 RS-22 (NE-4110S) RS-422/485 (NE-4110A) RS-22 (NE-4120S) RS-422/485 (NE-4120A) TTL Infrastructure mode (a/b/g), Ad Hoc mode (b/g) Port 2 TTL TTL TTL TTL Speed 110 bps to 20.4 Kbps 50 bps to Kbps Communication Parameters Parity: None, Even, Odd, Space, Mark; Data Bits: 5, 6, 7, 8; Stop Bit(s): 1, 1.5, 2 Flow Control (RTC/CTS/ XON/XOFF) Protocols Utilities OS Driver Support Configuration ICMP, IP, TCP, UDP, DHCP, Telnet, SNMP, HTTP, SMTP, ARP, SNTP Network Enabler Administration Suite for Windows 95/98/ME/NT/2000/XP/200 TTL ICMP, IP, TCP, UDP, DHCP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, SSH, HTTPS Windows 95/98/ME/NT/2000/XP/200/XP x64/200 x64 COM driver, Linux real TTY driver, SCO Unix, SCO OpenServer 5, UnixWare 7, UnixWare 2.1.x, SVR4.2, QNX Web console, serial console, Telnet console, or Windows utility Real COM, TCP Server, TCP Client, UDP Watchdog timer Real COM, TCP Server, TCP Client, UDP, RFC 2217 Power Input 5 VDC ± 5%. VDC ± 5% Power Consumption VDC (max) 950 VDC (max) Dimensions (W H D) Operating Temperature Storage Temperature 57 x 40 mm (2.24 x 1.57 in) 45 x 6 mm (1.77 x 1.41 in) 0 to 55 C (2 to 11 F), 5 to 95% RH -20 to 85 C (-4 to 185 F), 5 to 95% RH 54 x 40 x 1. mm (2.1 x 1.57 x 0.52 in) Wide Temperature Models -40 to 75 C (-40 to 167 F) EMC FCC Part 16, Subpart B, Class B CE EN55022 Class B CE EN55024 FCC Part 17 Subpart B, Class A / FCC Part 15 Subpart B, Class A Class A/ ETSI EN / ETSI EN Warranty 5 years info@moxa.com -44

NE-4100 Series 100 Mbps Embedded NE-4110S/4110A NE-4120S/4120A Features 10/100 Mbps Ethernet interface, 20.

half the size of a credit card Low power consumption at 1.

Any device with a standard serial interface can connect to Ethernet with MOXA embedded devices servers in a snap.

46 NE-4100 Series 100 Mbps Embedded NE-4110S/4110A NE-4120S/4120A Features 10/100 Mbps Ethernet interface, 20.4 Kbps serial interface TCP Server, TCP client, UDP, and Real COM operation modes Support for DHCP, BootP, Static IP, and ARP SNMP and alert for event trapping and notification Only mm, half the size of a credit card Low power consumption at 1.5W, with single +5V input NE-4100T Overview NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their products. Any device with a standard serial interface can connect to Ethernet with MOXA embedded devices servers in a snap. NE-4110 embedded device servers provide a 10/100 Mbps Ethernet interface with ready-touse operation modes such as TCP Server, TCP Client, and UDP. A Real COM driver is also included for backwards compatibility with legacy software. SNMP and Alert for Event Trap and Notification NE-4100 embedded device servers can be configured to send an SNMP trap or under the following conditions: Cold/warm start Change in IP address Failure in password authentication Change in password Change in DSR/DCD line signal On-site Configuration with Serial Command Mode Easy on-site configuration of network settings Simple command frame format Comprehensive command set for serial and network configuration Easily switch between software and hardware triggers Software reset Typical Installation Examples Stand-alone Type (RJ45 Ethernet, NE-4110) Stand-alone Type (Pin header Ethernet, NE-4120) Drop-in Type (Dual-in-line pin header, NE-4100T) info@moxa.com

Total Solutions for Industrial Device Networking NE-4100 Starter Kit The Network Enabler Starter Kit includes an evaluation board, power adaptor, software, and serial and Ethernet cables to allow

The evaluation board is equipped with serial, Ethernet, digital I/O, and power circuits to help you test your modules and applications.

47 Total Solutions for Industrial Device Networking NE-4100 Starter Kit The Network Enabler Starter Kit includes an evaluation board, power adaptor, software, and serial and Ethernet cables to allow quick and easy evaluation of all embedded device server functions. The evaluation board is equipped with serial, Ethernet, digital I/O, and power circuits to help you test your modules and applications. Cross-over Ethernet Cable Null Modem Cable Power Cord (US or Euro plug) Document & Application Power Adaptor Software CD Board (90 to 240 VAC, 12 VDC) 40 mm (1.57 in) Pin Assignment NE-4110S/4110A 4 mm (1.4 in) J2 J1 57 mm (2.24 in) 45 mm (1.77 in) 16-bit Micro Processor RJ45 CN 1 8 PIN Signals 1 Tx+ 2 Tx- Rx+ 6 Rx- NE-4120S/4120A 40 mm (1.57 in) 4 mm (1.4 in) J2 J1 57 mm (2.24 in) 45 mm (1.77 in) 16-bit Micro Processor J J Ethernet Pin-header Tx+ Rx+ Tx- Rx- NE-4110/4120 Series J2 NE-4110S/4120S J1 NE-4110A/4120A J1 GND GND DIO0 DIO1 DIO2 DIO VCC(+5V) VCC(+5V) 10M_LED 100M_LED Ready_LED Reset NC CTS0 DSR0 DTR0 RxD NC RTS0 GND TxD0 DCD0 NC NC NC RxD- (Data-) TxD NC NC GND RxD+ (Data+) TxD- For 2-wire RS-485 mode, Pin is Data+, Pin 4 is Data- TxD1 2 1 RxD1 NE-4100T Pin No. Signal Pin No. Signal 1 ETx+ 2 ETx- ERx+ 4 ERx- 5 LED 10M 6 TxD0 7 RxD0 8 RTS0 9 CTS0 10 Reset 11 GND 12 GND 1 TxD1 6 mm (1.42 in) 45 mm (1.77 in) 14 PIO0 15 PIO1 16 PIO2 17 PIO 18 LED 100M 19 DCD0 20 DSR0 21 DTR0 22 GND 2 Ready LED 24 +5V 25 +5V 26 RxD1 (45 6 mm, 26-pin DIL package, 2.54 mm pitch) info@moxa.com -46

48 Ordering Information NE-4110S: 100 Mbps network enabler for RS-22 devices, with RJ45 Ethernet connector NE-4110A: 100 Mbps network enabler for RS-422/485 devices, with RJ45 Ethernet connector NE-4120S: 100 Mbps network enabler for RS-22 devices, with 5-pin Ethernet pin header NE-4120A: 100 Mbps network enabler for RS-422/485 devices, with 5-pin Ethernet pin header NE-4100T: 100 Mbps network enabler for TTL devices, with DIL package NE-4110-ST: Starter kit for NE-4110S/NE-4110A NE-4120-ST: Starter kit for NE-4120S/NE-4120A NE-4100-ST: Starter kit for NE-4100T Specifications Form Factor Type: NE-4110, NE-4120 Series: Stand-alone module, ready-to-go NE-4100T: 26-pin dual-in-line package Dimensions: NE-4110, NE-4120 Series: mm NE-4100T: 45 6 mm LAN Interface Type: 10/100 Mbps auto-sensing MDI/MDIX Protection: 1.5 KV isolation Connector: NE-4110 Series: RJ45 connector NE-4120 Series: 5-pin header Serial Interface Port 1: NE-4110S, 4120S: RS-22 NE-4110A, 4120A: RS-422, RS-485 (2-wire), RS-485 (4-wire) NE-4100T: Serial (TTL) Port 2: Serial (TTL) console port Serial Signals RS-22: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485: Data+, Data-, GND with ADDC (Automatic Data Direction Control) TTL (Port 1): TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND TTL (Port 2): TxD, RxD, GND Serial Parameters Parity: None, Even, Odd, Space, Mark Data Bits: 5, 6, 7, 8 Stop Bit(s): 1, 1.5, 2 Flow Control: RTS/CTS, XON/XOFF Speed: 110 bps to 20.4 Kbps Digital I/O Pins Four programmable I/O pins (GPIO) Software Features Protocols: ICMP, ARP, IP, TCP, UDP, DHCP, Telnet, HTTP, SNMP, SMTP Utilities: Network Enabler Administration Suite for Windows 95/98/ ME/NT/2000/XP/200/Vista OS Driver Support: Windows 95/98/ME/NT/2000/XP/200/XP x64/200 x64 COM driver, Linux Real TTY, Unix Configuration: Web console, serial console, Telnet console, or Windows utility Operation Modes: TCP Server, TCP Client, UDP, Real COM Power Requirements Power input: 5 VDC, +/- 5% Power consumption: VDC (max.) Temperature/Humidity Operation: 0 to 50 C (2 to 11 F), 5 to 95% RH for standard models -40 to 75 C (-40 to 185 F), 5 to 95% RH for -T models Storage: -20 to 85 C (-4 to 185 F), 5 to 95% RH Regulatory Approvals EMC: CE: Class A FCC: Class A Warranty: 5 years info@moxa.com

Total Solutions for Industrial Device Networking WE-2100T Embedded Wireless Network Enabler for Serial Devices Overview The WE-2100T is a secure and compact embedded wireless module.

11a/b/g networks Real COM, TCP server, TCP slave, UDP operating, RFC 2217 modes Windows, Linux COM drivers Windows Vista Real COM driver Wireless security with WEP, WPA, and WPA2 Configure through

not need complex RF knowhow to connect serial devices to the wireless Ethernet. Encryption for secure data transfer is supported along with the 802.11 a/b/g radio specification.

49 Total Solutions for Industrial Device Networking WE-2100T Embedded Wireless Network Enabler for Serial Devices Overview The WE-2100T is a secure and compact embedded wireless module. It allows serial devices to connect to access points in infrastructure mode, or to other WE-2100T's in ad-hoc mode. With the WE-2100T, Features Connect a serial device to IEEE802.11a/b/g networks Real COM, TCP server, TCP slave, UDP operating, RFC 2217 modes Windows, Linux COM drivers Windows Vista Real COM driver Wireless security with WEP, WPA, and WPA2 Configure through serial port with serial command Nonstandard baudrates such as 250K and 500K 8 programmable digital I/O channels SSL/SSH encryption for configuration Compact size and easily mounted housing users do not need complex RF knowhow to connect serial devices to the wireless Ethernet. Encryption for secure data transfer is supported along with the a/b/g radio specification. Operation Modes for Embedded Applications The WE-2100T supports Real COM, TCP server, TCP client, UDP, and RFC 2217 operation modes. These operation modes are designed to fulfill the requirements of embedded module applications. Complete driver support for Real COM mode is included and easy to install. On-site Configuration with Serial Command Mode Easy on-site configuration of network settings Simple command frame format Comprehensive command set for serial and network configuration Easily switch between software and hardware triggers Software reset Ordering Information WE-2100T: 1-port wireless module with a/b/g WE-2100T-ST: Starter kit for WE-2100T Package Checklist 1 WE-2100T Wireless Module Power Adaptor Warranty Booklet Quick Installation Guide Document and Software CD-ROM info@moxa.com -48

5600 Series. 8 and 16-port Serial Device Servers. Features. Internet Readiness for up to 16 Serial Devices

5600 Series. 8 and 16-port Serial Device Servers. Features. Internet Readiness for up to 16 Serial Devices 5600 Series 8 and 16-port Features Up to 16 ports supporting RS-22, RS-422, or RS-485 operation Compact desktop model or standard 19-inch rackmount model Auto-detecting 10/100 Mbps Ethernet 15 KV ESD surge