HDMI to HDMI Matrix Switcher

Transcription

1 4K HDR 4 4 HDMI to HDMI Matrix Switcher Application Programming Interface AT-HDR-H2H-44M API

2 Version Information Version Release Date Notes 1 02/22 Initial release AT-HDR-H2H-44M API 2

3 Table of Contents Commands 4 AT-HDR-H2H-44M API 3

4 The following tables provide an alphabetical list of commands available on the AT-HDR-H2H-88MA. All commands are case-sensitive and must be entered as documented. If the command fails or is entered incorrectly, then the feedback is Command FAILED. IMPORTANT: Each command is terminated with a carriage-return (0x0d) and the feedback is terminated with a carriage-return and line-feed (0x0a). Command All# Blink Broadcast Clear CSpara EDIDMSet EDIDOut HDCPSet IPAddUser IPCFG IPDelUser IPDHCP IPLogin IPPort IPQuit IPStatic IPTimeout IROFF IRON IRSTA Lock Mreset PWOFF PWON PWSTA Recall Description Resets all inputs to corresponding outputs Enable/Disable red blinking of the PWR button LED Enables, disables, and displays status of broadcast mode Erases the saved I/O route settings for the chosen preset number Set RS-232 parameter Sets the EDID of an input to default, internal, or a previously saved EDID Saves the output EDID to memory Sets HDCP mode of the HDMI ports Add a user for TCP/IP control Displays IP address configuration Delete a user from TCP/IP Turns DHCP on / off Enables / Disables IPLogin mode Set the TCP/IP port Logs out of TCP/IP Sets a static IP address Determines amount of seconds of inactivity before TCP/IP disconnects Disables the front panel IR receiver window Enables the front panel IR receiver window Displays the current status of the front panel IR receiver window Locks the front panel of the matrix so no buttons are active Sets matrix back to the default settings Turns the unit off Turns the unit on Displays the power status of the matrix Recalls saved I/O route settings for the chosen preset number AT-HDR-H2H-44M API 4

5 Command Description Save Saves I/O route settings for future use, preset options 0 to 8 Status System Telnet TrigCEC Type Unlock Version VOUTMute x?all x?$ x?avx& Displays which inputs are currently connected to which outputs Displays system information about the AT-HDR-H2H-44M Enables/Disables telnet daemon Triggers the stored CEC command to turn the display on and off Brings up the model information Unlocks the front panel of the matrix, enabling the buttons again Brings up the current firmware version Mutes/Unmutes audio output volume Sets selected input to all outputs Changes status of output channel Switch input to output AT-HDR-H2H-44M API 5

6 All# Resets all inputs to corresponding outputs. All# All# Blink x1avx1, x2avx2, x3avx3, x4avx4 Enable/Disable red blinking of the PWR button LED for identifying the unit among others similar units. Default is off. Blink X X Value on, off, sta Blink sta Blink off Broadcast Enables, disables, and displays status of broadcast mode. Broadcast X X Variable on, off, sta Broadcast sta Broadcast on Clear Erases the saved I/O route settings for the chosen preset number. ClearX X I/O preset number 1 to 4 Clear2 Clear2 AT-HDR-H2H-44M API 6

7 CSpara Set RS-232 parameters CSpara[W,X,Y,Z] W Baud rate 2400, 4800, 9600, 19200, 38400, 57600, X Data bits 7, 8 Y Parity bit None, Odd, Even Z Stop bits 1, 2 CSpara[115200,8,0,1] CSpara[sta] CSpara[115200,8,0,1] CSpara [115200,8,0,1] EDIDMSet Sets the EDID of an input to default, internal, or a previously saved EDID. EDIDMSetX YZ X Input 1 to 4 Y EDID type default, save, int Z Variable save - 1 to 4 int - 1 to 12 EDIDMSet1 default EDIDMSet2 save2 EDIDMSet3 int3 Internal EDIDs 1: 1080p / 2 channel 2: 1080p / multichannel (lossless) 3: 1080p 3D / Dolby Digital 4: 1080p 3D / 2 channel 5: 1080p 3D / multichannel (lossless) 6: 1080p 3D / Dolby Digital EDIDMSet1 default EDIDMSet2 save2 EDIDMSet3 int3 7: 4K 60 4:2:0 / 2 channel 8: 4K 60 4:2:0 / multichannel (HD lossless) 9: 4K 60 4:2:0 HDR / 2 channel 10: 4K 60 4:2:0 HDR / multichannel (HD lossless) 11: 4K 60 4:4:4 8-bit / 2 channel 12: 4K 60 4:4:4 8-bit / multichannel (HD lossless) AT-HDR-H2H-44M API 7

8 EDIDOut Saves the output EDID to memory. EDIDOut X X Variable 1 to 4 EDIDOut 1 EDIDOut 1 HDCPSet Sets HDCP mode of the HDMI input ports. HDCPSet X Y X Input 1 to 4 Y Variable on, off, sta HDCPSet 1 on HDCPSet 1 on IPAddUser Add a user for TCP/IP control. IPAddUser X Y X User name 20 characters (max) Y Password 20 characters (max) IPAddUser ABCd Y4n IPAddUser ABCd Y4n TCP/IP user was added AT-HDR-H2H-44M API 8

9 IPCFG Displays IP address configuration. IPCFG IPCFG IP Addr: Netmask: Gateway: IP Port: 23 IPDelUser Delete a user from TCP/IP. IPDelUser X X User name 20 characters (max) IPDelUser ABCd IPDelUser ABCd TCP/IP user was deleted IPDHCP Turns DHCP on / off. IPDHCP X X Value on, off, sta IPDHCP on IPDHCP on AT-HDR-H2H-44M API 9

10 IPLogin Enables / Disables IPLogin mode. IPLogin X X Value on, off, sta IPLogin off IPLogin off IPPort Set the TCP/IP port. IPPort X X Port 1 to 65535, sta IPPort 23 IPPort 23 IPQuit Logs out of TCP/IP. IPQuit IPQuit IPQuit AT-HDR-H2H-44M API 10

11 IPStatic Sets a static IP address. IPStatic X Y Z X IP address 0 to 255 (per byte) Y Subnet mask 0 to 255 (per byte) Z Gateway (router) 0 to 255 (per byte) IPStatic IPStatic IPTimeout Determines amount of seconds of inactivity before TCP/IP disconnects. IPTimeout X X Interval (in seconds) 1 to 3600 IPTimeout 300 IROFF IPTimeout 300 Disables all IR. IROFF IROFF IROFF IRON Enables all IR. IRON IRON IRON AT-HDR-H2H-44M API 11

12 IRSTA Provides the current status of IR. IRSTA IRSTA IRON Lock Locks the front panel of the matrix so no buttons are active. The PWR led will blink blue when locked. Lock Lock Lock Mreset Sets matrix back to the default settings. MReset Mreset Mreset PWOFF Turns the unit off. PWOFF PWOFF PWOFF PWON Turns the unit on. PWON PWON PWON AT-HDR-H2H-44M API 12

13 PWSTA Displays the power status of the matrix. PWSTA PWSTA PWON Recall Recalls saved I/O route settings for the chosen preset number RecallX X Channel 1 to 4 Recall3 Recall3 Save Saves I/O route settings for future use, preset options 1 to 8. SaveX X Channel 1 to 4 Save1 Save1 Status Displays which inputs are currently connected to which outputs. Status Status x1avx2, x2avx3, x3avx2, x4avx1 AT-HDR-H2H-44M API 13

14 System Displays system information about the AT-HDR-H2H-88MA. System X X Status sta System sta Model: AT-HDR-H2H-88MA MAC Addr: b8-98-b e6 Address Type: DHCP IP Addr: Netmask: Gateway: HTTP Port: 80 Telnet Port: 23 Firmware: On/Up Time <dd HH:mm:ss>: 00 00:53:31 Telnet Enables/Disables telnet daemon. Telnet X X Value on, off, sta Telnet sta Telnet off TrigCEC Triggers the stored CEC commands to control a display. TrigCECX Y X Output Channel 1 to 4 Y Variable on, off, vol+, vol-, mute TrigCEC on TrigCEC on AT-HDR-H2H-44M API 14

15 Type Brings up the model information. Type Type AT-HDR-H2H-44M Unlock Unlocks the front panel of the matrix, enabling the buttons again. Unlock Unlock Unlock Version Brings up the current firmware version. VersionX X Variable MCU VersionMCU V VOUTMute Mutes/Unmutes audio output volume by channel. VOUTMuteX Y X Audio Output Channel 1 to 4 Y Variable on, off, sta VOUTMute3 sta VOUTMute3 on AT-HDR-H2H-44M API 15

16 x?all Sets selected input to all outputs. x?all? Input 1 to 4 x3all x3all x?$ Turns HDMI signal on/off for the specified output channel. x?$ Y X Output 1 to 4 Y Variable on, off, sta x2$ sta x2$ on x?avx& Switch input to output. x?avx&? Input 1 to 4 & Output 1 to 4 x1avx3 x1avx3 AT-HDR-H2H-44M API 16

17 atlona.com Atlona Inc. All rights reserved. Atlona and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here. AT-NPIB