Universal Port Resource Pooling for Voice and Data Services
|
|
- Suzanna Lee
- 6 years ago
- Views:
Transcription
1 Universal Port Resource Pooling for Voice and Data Services Feature History Release 12.2(2)XA 12.2(2)XB1 12.2(11)T Description This feature was introduced on the Cisco AS5350 and AS5400. This feature was implemented on the Cisco AS5850 platform. This feature was integrated into Cisco IOS Release 12.2(11)T and support was added for the Cisco AS5350, Cisco AS5400, and Cisco AS5850 platforms. This document describes the Universal Port Resource Pooling for Voice and Data Services feature and includes the following sections: Feature Overview, page 1 Supported Platforms, page 3 Supported Standards, MIBs, and RFCs, page 4 Configuration Tasks, page 4 Command Reference, page 7 Glossary, page 9 Feature Overview With Cisco Resource Pool Manager (RPM), telephone companies and Internet service providers (ISPs) can share dial resources for wholesale and retail dial network services in a single network access server (NAS) or across multiple NAS stacks. Call management and call discrimination can be configured to occur before the call is answered, and customers are differentiated by using configurable customer profiles that are based on the dial number identification service (DNIS) and call type determined at the time of an incoming call. As a result, Cisco RPM enables service providers to count, control, and manage resources and provide accounting for shared resources when implementing different service-level agreements. 1
2 Feature Overview The Universal Port Resource Pooling for Voice and Data Services feature now enables service providers to mix voice and data services using resource pool management. With the implementation of the new voice command in resource-pool profile service configuration mode, a resource group with voice service is designated under a particular customer profile, and voice resource pool service is enabled after resouce pool management is configured. Cisco RPM can be configured in one or more standalone Cisco NASs or, optionally, across multiple NAS stacks by using one or more external Cisco Resource Pool Manager Servers (RPMSs). This document presents the single, standalone NAS version of Cisco RPM. For more information about Cisco RPMS, see the Cisco Resource Pool Manager Server Solution Guide. Benefits The Universal Port Resource Pooling for Voice and Data Services feature provides the following benefits: Mix voice and data services in a single access server or stack of servers using resource pool management. Manage customer use of shared resources. Offer advanced wholesale dial-up services directly to customers. Because the PPP and AAA feature sets are selected by the incoming DNIS, the service provider no longer needs tunneling technology to provide unique service-level agreements to wholesale dial customers. Efficiently use resource groups to offer differing over-subscription rates and dial service-level agreements. Accept or reject a call based on the incoming DNIS number before answering the call. Include local retail dial services in the same NAS with the wholesale dial customers. Restrictions For voice calls, resource pool management is done only for incoming calls (calls from PSTN legs). For outgoing voice calls, resources are allocated only from the default system resource group. Mixing of voice DNIS numbers and data DNIS numbers within the same DNIS group in resource pool management is not allowed. The same DNIS cannot be used for both voice and data calls in resource pool management. Modem pooling and resource pool management are not compatible. Related Features and Technologies Authentication, authorization, and accounting (AAA) Point-to-Point Protocol (PPP) Virtual Private Dialup Network (VPDN) 2
3 Supported Platforms Related Documents Cisco Resource Pool Manager Server Configuration Guide Cisco Resource Pool Manager Server Installation Guide Cisco Resource Pool Manager Server Solutions Guide Release Notes for Cisco Resource Pool Manager Server, Release 1.0 Resource Pool Management Resource Pool Management with Direct Remote Services Supported Platforms Cisco AS5350 universal gateway Cisco AS5400 universal gateway CiscoAS5850universalgateway Table 1 Cisco IOS Release and Platform Support for this Feature Platform 12.2(2)XA 12.2(2)XB1 12.2(11)T Cisco AS5350 X Not supported X Cisco AS5400 X Not supported X Cisco AS5850 Not supported X X Determining Platform Support Through Cisco Feature Navigator Cisco IOS software is packaged in feature sets that support specific platforms. To get updated information regarding platform support for this feature, access Cisco Feature Navigator. Cisco Feature Navigator dynamically updates the list of supported platforms as new platform support is added for the feature. Cisco Feature Navigator is a web-based tool that enables you to determine which Cisco IOS software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or release. Under the release section, you can compare releases side by side to display both the features unique to each software release and the features in common. To access Cisco Feature Navigator, you must have an account on Cisco.com. If you have forgotten or lost your account information, send a blank to cco-locksmith@cisco.com. An automatic check will verify that your address is registered with Cisco.com. If the check is successful, account details with a new random password will be ed to you. Qualified users can establish an account on Cisco.com by following the directions at Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following URL: 3
4 Supported Standards, MIBs, and RFCs Availability of Cisco IOS Software Images Platform support for particular Cisco IOS software releases is dependent on the availability of the software images for those platforms. Software images for some platforms may be deferred, delayed, or changed without prior notice. For updated information about platform support and availability of software images for each Cisco IOS software release, refer to the online release notes or, if supported, Cisco Feature Navigator. Supported Standards, MIBs, and RFCs Standards No new or modified standards are supported by this feature. MIBs No new or modified MIBs are supported by this feature. To obtain lists of MIBs supported by platform and Cisco IOS release and to download MIB modules, go to the Cisco MIB website on Cisco.com at RFCs No new or modified RFCs are supported by this feature. Prerequisites Because Cisco RPM differentiates customers through configured customer profiles based on the DNIS and call type determined at the time of an incoming call, the following components of resouce pool management must be configured before enabling voice resource pool service: Customer Profile Types Call Types DNIS Groups Resource Groups Resource Services For more information about configuring resouce pool management, see Configuring Resource Pool Management. Configuration Tasks See the following sections for configuration tasks for this feature. Each task in the list is identified as either required or optional. Confirming Voice Resource Pool Service Availability (optional) Enabling Voice Resource Pool Service (required) Verifying Voice Resource Pool Service (optional) 4
5 Configuration Examples Confirming Voice Resource Pool Service Availability To confirm voice resource pool service availability, use the following commands, beginning in global configuration mode: Command Purpose Step 1 Router(config)# resource-pool profile service voip Enters profile service configuration mode. Step 2 Router(config-service-profile)#? Displays profile service configuration mode options. Enabling Voice Resource Pool Service To configure voice resource pool service, use the following commands, beginning in service profile configuration mode: Command Purpose Step 1 Router(config-service-profile)# voice Enables voice resource pool service. Verifying Voice Resource Pool Service Step 1 Enter the show running-config command in privileged EXEC mode. If the resource-pool profile service voip voice string is displayed, voice resource pool service is enabled. Router# show running-config... resource-pool enable! resource-pool group resource voip-rg range port 3/1 3/15! resource-pool profile customer cp-voice limit base-size all limit overflow-size 0 resource voip-rg speech service voip dnis group dnis-voip! resource-pool profile service voip voice! dialer dnis group dnis-voip number 526 number 522 number 525x call-type cas speech... Configuration Examples This section provides the following configuration examples: Confirming Voice Resource Pool Service Availability Example 5
6 Configuration Examples Configuring Voice Resource Pool Service Example Confirming Voice Resource Pool Service Availability Example In the following example, the help feature is used in profile service configuration mode to confirm that voice resource pool services can be configured. Router(config)# resource-pool profile service voip Router(config-service-profile)#? Service Profile Configuration Commands: default Set a command to its defaults exit Exit from resource-manager configuration mode help Description of the interactive help system modem Configure modem service parameters no Negate a command or set in its defaults voice Configure voice service parameters Configuring Voice Resource Pool Service Example In the following example, DNIS is assigned with leading digits of 522, 525x, and 526 to a DNIS group named dnis-voip, and voice resource pool service is enabled. Router(config)# dialer dnis group dnis-voip Router(config-dnis-group)# number 525x Router(config-dnis-group)# number 522 Router(config-dnis-group)# number 526 Router(config-dnis-group)# call-type cas speech Router(config-dnis-group)# exit Router(config)# resource-pool group resource voip-rg Router(config-resource-group)# range port 3/1 3/15 Router(config-resource-group)# exit Router(config)# resource-pool profile service voip Router(config-service-profile)# voice Router(config-service-profile)# exit Router(config)# resource-pool profile customer cp-voice Router(config-customer-profile)# resource voip-rg speech service voip Router(config-customer-profile)# dnis group dnis-voip Note For more information about using wildcards in DNIS profiles, see Configuring DNIS Groups in Configuring Resource Pool Management. 6
7 Command Reference Command Reference This section documents the new voice command. All other commands used with this feature are documented in the Cisco IOS Release 12.2 command reference publications. voice 7
8 voice voice To enable voice resource pool services for resource pool management, use the voice command in service profile configuration mode. To disable voice services, use the no form of this command. voice no voice Syntax Description There is no syntax for this command. Defaults Disabled Command Modes Service profile configuration mode Command History Release 12.2(2)XA 12.2(2)XB1 12.2(11)T Modification This command was introduced on the Cisco AS5350 and AS5400. This command was implemented on the Cisco AS5850 platform. This command was integrated into Cisco IOS Release 12.2(11)T and support was added for the Cisco AS5350, Cisco AS5400, and Cisco AS5850 platforms. Examples The following example shows that voice service is available and enables voice resource pool service using the voice command in service profile configuration mode: Router(config)# resource-pool profile service voip Router(config-service-profile)#? Service Profile Configuration Commands: default Set a command to its defaults exit Exit from resource-manager configuration mode help Description of the interactive help system modem Configure modem service parameters no Negate a command or set in its defaults voice Configure voice service parameters Router(config-service-profile)# voice Command History Command resource-pool enable resource-pool profile service voip Description Enables resource pool management. Defines the VoIP service profile for resource pool management. 8
9 Glossary Glossary AAA authentication, authorization, and accounting. DNIS Dialed Number Identification Service. Telephone service that identifies for the receiver of a call the number that the caller dialed. DSP Digital Signal Processor. NAS network access server. Cisco platform or collection of platforms, such as an AccessPath system, that interfaces between the packet world (for example, the Internet) and the circuit world (for example, the PSTN). PPP Point-to-Point Protocol. Successor to SLIP that provides router-to-router and host-to-network connections over synchronous and asynchronous circuits. Whereas SLIP was designed to work with IP, PPP was designed to work with several network layer protocols, such as IP, IPX, and ARA. PPP also has built-in security mechanisms, such as CHAP and PAP. PPP relies on two protocols, LCP and NCP. PSTN Public Switched Telephone Network. General term referring to the variety of telephone networks and services in place worldwide. Sometimes called POTS. RPM Resource Pool Manager. RPMS Resource Pool Manager Server. SLIP Serial Line Internet Protocol. Standard protocol for point-to-point serial connections using a variation of TCP/IP. Predecessor of PPP. VPDN virtual private dialup network. Note For a list of other internetworking terms, see the Internetworking Terms and Acronyms document available on the Documentation CD-ROM and Cisco.com at the following URL: 9
RADIUS Attribute 66 Tunnel-Client-Endpoint Enhancements
RADIUS Attribute 66 Tunnel-Client-Endpoint The RADIUS Attribute 66 (Tunnel-Client-Endpoint) feature allows the hostname of the network access server (NAS) to be specified--rather than the IP address of
More informationThis feature was introduced.
Feature History Release 12.2(11)T Modification This feature was introduced. This document describes the QSIG for TCL IVR (Tool Language Interactive Voice Response) 2.0 feature in and includes the following
More informationConfiguring Resource Pool Management
Configuring Resource Pool Management This chapter describes the Cisco Resource Pool Management (RPM) feature. It includes the following main sections: RPM Overview How to Configure RPM Verifying RPM Components
More informationAutosense for ATM PVCs and MUX SNAP Encapsulation
Autosense for ATM PVCs and MUX SNAP Encapsulation The PPPoA/PPPoE Autosense for ATM PVCs feature enables a router to distinguish between incoming PPP over ATM (PPPoA) and PPP over Ethernet (PPPoE) over
More informationRADIUS Tunnel Attribute Extensions
The feature allows a name to be specified (other than the default) for the tunnel initiator and the tunnel terminator in order to establish a higher level of security when setting up VPN tunneling. Finding
More informationDHCP Client on WAN Interfaces
DHCP Client on WAN Interfaces First Published: February 25, 2002 Last Updated: September 12, 2008 The DHCP Client on WAN Interfaces feature extends the Dynamic Host Configuration Protocol (DHCP) to allow
More informationPre-Fragmentation for IPSec VPNs
Pre-Fragmentation for IPSec VPNs Feature History Release 12.1(11b)E 12.2(13)T 12.2(14)S Modification This feature was introduced. This feature was integrated into Cisco IOS Release 12.2(13)T. This feature
More informationPPP over Frame Relay
The feature allows a router to establish end-to-end Point-to-Point Protocol (PPP) sessions over Frame Relay. Finding Feature Information, page 1 Prerequisites for, page 1 Restrictions for, page 2 Information
More informationRadius-Server Domain-Stripping Enhancements
Radius-Server Domain-Stripping Enhancements Feature History Release 12.2(15)B Modification This feature was introduced on the Cisco 7200 series and Cisco 7400 ASR. This document describes the Radius-Server
More informationSignaling IS-IS When dcef Is Disabled
Signaling IS-IS When dcef Is Disabled Feature History Release 12.0(10)S 12.0(10)ST Modification This feature was introduced. This command was integrated into T. This feature module describes the Signaling
More informationConfiguring PPP Callback
Configuring PPP Callback This chapter describes how to configure PPP callback for dial-on-demand routing (DDR). It includes the following main sections: PPP Callback for DDR Overview How to Configure PPP
More informationRSVP Support for RTP Header Compression, Phase 1
RSVP Support for RTP Header Compression, Phase 1 The Resource Reservation Protocol (RSVP) Support for Real-Time Transport Protocol (RTP) Header Compression, Phase 1 feature provides a method for decreasing
More informationConfiguring RADIUS. Finding Feature Information. Prerequisites for RADIUS
The RADIUS security system is a distributed client/server system that secures networks against unauthorized access. In the Cisco implementation, RADIUS clients run on Cisco devices and send authentication
More informationPPPoE Client DDR Idle Timer
The feature supports the dial-on-demand routing (DDR) interesting traffic control list functionality of the dialer interface with a PPP over Ethernet (PPPoE) client, but also keeps original functionality
More informationAutosense of MUX/SNAP Encapsulation and PPPoA/PPPoE on ATM PVCs
Autosense of MUX/SNAP Encapsulation and PPPoA/PPPoE on ATM PVCs Feature History for Autosense of MUX/SNAP Encapsulation and PPPoA/PPPoE on ATM PVCs Release Modification 12.2(15)B This feature was introduced.
More informationQoS: Per-Session Shaping and Queuing on LNS
QoS: Per-Session Shaping and Queuing on LNS First Published: February 28, 2006 The QoS: Per-Session Shaping and Queuing on LNS feature provides the ability to shape (for example, transmit or drop) or queue
More informationDHCP Relay MPLS VPN Support
DHCP Relay MPLS VPN Support Feature History Release 12.2(4)B 12.2(8)T 12.2(13)T 12.2(27)SBA Modification This feature was introduced. This feature was integrated into Cisco IOS Release 12.2(8)T The feature
More informationIP Overlapping Address Pools
The feature improves flexibility in assigning IP addresses dynamically. This feature allows you to configure overlapping IP address pool groups to create different address spaces and concurrently use the
More informationAAA Authorization and Authentication Cache
AAA Authorization and Authentication Cache First Published: March 16, 2006 Last Updated: March 1, 2006 The AAA Authorization and Authentication Cache feature allows you to cache authorization and authentication
More informationMPLS VPN ID. Feature Overview. This feature was introduced. Support for this feature was integrated into Cisco IOS Release 12.2(4)B.
MPLS VPN ID Feature History Release 12.0(17)ST 12.2(4)B Modification This feature was introduced. Support for this feature was integrated into. This document describes the MPLS VPN ID feature in and includes
More informationOSP URL Command Change
OSP URL Command Change Feature History Release 12.2(2)XU Modification This feature was introduced. This document describes the OSP URL Command Change feature in and includes the following sections: Feature
More informationMPLS Traffic Engineering (TE) Configurable Path Calculation Metric for Tunnels
MPLS Traffic Engineering (TE) Configurable Path Calculation Metric for Tunnels Feature History Release 12.0(18)ST 12.2(11)S 12.0(22)S Modification This feature was introduced. This feature was integrated
More informationRADIUS Packet of Disconnect
First Published: March 19, 2001 Last Updated: October 2, 2009 The feature is used to terminate a connected voice call. Finding Feature Information Your software release may not support all the features
More informationRADIUS Logical Line ID
The feature, also known as the Logical Line Identification (LLID) Blocking feature enables administrators to track their customers on the basis of the physical lines on which customer calls originate.
More informationFPG Endpoint Agnostic Port Allocation
When the Endpoint Agnostic Port Allocation feature is configured, an entry is added to the Symmetric Port Database. If the entry is already available, the port listed in the Symmetric Port Database is
More informationThis feature was introduced. This feature was integrated into Cisco IOS Release 12.2(27)SBA.
The feature allows an L2TP network server (LNS) participating in Stack Group Bidding Protocol (SGBP) to send a redirect message to the L2TP access concentrator (LAC) if another LNS wins the bid. The LAC
More informationRADIUS NAS-IP-Address Attribute Configurability
RADIUS NAS-IP-Address Attribute The RADIUS NAS-IP-Address Attribute feature allows you to configure an arbitrary IP address to be used as RADIUS attribute 4, NAS-IP-Address, without changing the source
More informationConfiguring Authorization
Configuring Authorization AAA authorization enables you to limit the services available to a user. When AAA authorization is enabled, the network access server uses information retrieved from the user
More informationPPPoE Client DDR Idle-Timer
The feature supports the dial-on-demand routing (DDR) interesting traffic control list functionality of the dialer interface with a PPP over Ethernet (PPPoE) client, but also keeps original functionality
More informationConfiguring the Physical Subscriber Line for RADIUS Access and Accounting
Configuring the Physical Subscriber Line for RADIUS Access and Accounting Configuring a physical subscriber line for RADIUS Access and Accounting enables an L2TP access concentrator (LAC) and an L2TP network
More informationRADIUS Logical Line ID
RADIUS Logical Line ID Feature History for RADIUS Logical Line ID Release Modification 12.2(13)T This feature was introduced. 12.2(15)B This feature was integrated into Cisco IOS Release 12.2(15)B. 12.2(27)SBA
More informationConfiguring DHCP Option 60 and Option 82 with VPN-ID Support for Transparent Automatic Logon
Configuring DHCP Option 60 and Option 82 with VPN-ID Support for Transparent Automatic Logon Intelligent Services Gateway (ISG) is a Cisco software feature set that provides a structured framework in which
More information802.1P CoS Bit Set for PPP and PPPoE Control Frames
802.1P CoS Bit Set for PPP and PPPoE Control The 802.1P CoS Bit Set for PPP and PPPoE Control feature provides the ability to set user priority bits in the IEEE 802.1Q tagged frame to allow traffic prioritization.
More informationConfiguring PPP over Ethernet with NAT
CHAPTER 3 The Cisco Secure Router 520 Ethernet-to-Ethernet routers support Point-to-Point Protocol over Ethernet (PPPoE) clients and network address translation (NAT). Multiple PCs can be connected to
More informationVLAN Range. Feature Overview
VLAN Range Feature History Release 12.0(7)XE 12.1(5)T 12.2(2)DD 12.2(4)B 12.2(8)T 12.2(13)T Modification The interface range command was introduced. The interface range command was integrated into Cisco
More informationQoS: Classification, Policing, and Marking on LAC Configuration Guide, Cisco IOS Release 12.4T
QoS: Classification, Policing, and Marking on LAC Configuration Guide, Cisco IOS Release 12.4T Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com
More informationConfiguring RADIUS. Finding Feature Information. Prerequisites for RADIUS. Last Updated: November 2, 2012
Configuring RADIUS Last Updated: November 2, 2012 The RADIUS security system is a distributed client/server system that secures networks against unauthorized access. In the Cisco implementation, RADIUS
More informationRADIUS Route Download
The feature allows users to configure their network access server (NAS) to direct RADIUS authorization. Finding Feature Information, page 1 Prerequisites for, page 1 Information About, page 1 How to Configure,
More informationConfiguring Authorization
The AAA authorization feature is used to determine what a user can and cannot do. When AAA authorization is enabled, the network access server uses information retrieved from the user s profile, which
More informationVirtual Private Networks (VPNs)
CHAPTER 19 Virtual Private Networks (VPNs) Virtual private network is defined as customer connectivity deployed on a shared infrastructure with the same policies as a private network. The shared infrastructure
More informationRemote Access MPLS-VPNs
First Published: August 12, 2002 Last Updated: May 4, 2009 The feature allows the service provider to offer a scalable end-to-end Virtual Private Network (VPN) service to remote users. This feature integrates
More informationConfiguring TACACS. Finding Feature Information. Prerequisites for Configuring TACACS
TACACS+ is a security application that provides centralized validation of users attempting to gain access to a router or network access server. TACACS+ provides detailed accounting information and flexible
More informationRADIUS Configuration Guide, Cisco IOS XE Everest (Cisco ASR 900 Series)
RADIUS Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series) Configuring RADIUS 2 Finding Feature Information 2 Prerequisites for RADIUS 2 Information About RADIUS 2 How to Configure
More informationpri-group timeslots pri-group timeslots range nfas_d [primary backup none] nfas_int number nfas_group group-id-number pri-group timeslots range
pri-group timeslots pri-group timeslots To configure Non-Facility Associated Signaling (NFAS) and specify the channels to be controlled by the primary NFAS D channel, use the pri-group timeslots command
More informationDial Peer Features and Configuration
Establishing voice communication over a packet network is similar to configuring a static route: You are establishing a specific voice connection between two defined endpoints. Call legs define the discrete
More information1- and 2-Port V.90 Modem WICs for Cisco 2600 and Cisco 3600 Series Multiservice Platforms
1- and 2-Port V.90 Modem WICs for Cisco 2600 and Cisco 3600 Series Multiservice Platforms Feature History Release 12.2(2)XB Description This feature was introduced. The 1- and 2-port V.90 modem WAN interface
More informationVPDN Group Session Limiting
VPDN Group Session Limiting Feature History Release 12.2(1)DX 12.2(2)DD 12.2(4)B 12.2(27)SB Modification This feature was introduced. This feature was integrated into Cisco IOS Release 12.2(2)DD. This
More informationInterworking Signaling Enhancements for H.323 and SIP VoIP
Interworking Signaling Enhancements for H.323 and SIP VoIP This feature module describes enhancements to H.323 and Session Initiation Protocol (SIP) signaling when interworking with ISDN, T1 channel associated
More informationCisco Voice Applications OID MIB
Cisco Voice Applications OID MIB The Cisco Voice Applications OID MIB (ciscovoiceapplicationsoidmib) defines the object identifiers (OIDs) that are assigned to various Cisco voice applications, such as
More informationConfiguring the Physical Subscriber Line for RADIUS Access and Accounting
Configuring the Physical Subscriber Line for RADIUS Access and Accounting Last Updated: December 5, 2011 Configuring a physical subscriber line for RADIUS Access and Accounting enables an L2TP access concentrator
More informationPPPoE on ATM. Finding Feature Information. Prerequisites for PPPoE on ATM. Restrictions for PPPoE on ATM
This feature module describes the PPP over Ethernet (PPPoE) on ATM feature. The feature provides the ability to connect a network of hosts over a simple bridging-access device to a remote access concentrator.
More informationConfiguring Modem Transport Support for VoIP
Configuring Modem Transport Support for VoIP This chapter explains how to configure modem transport support for Voice over IP (VoIP) and contains the following sections: Modem Transport Support Overview,
More informationRPR+ on Cisco 7500 Series Routers
RPR+ on Cisco 7500 Series Routers Feature History 12.0(19)ST1 12.0(22)S 12.2(14)S This feature was introduced. This feature was integrated into Cisco IOS Release 12.0(22)S. This feature was integrated
More informationRADIUS Vendor-Specific Attributes and RADIUS Disconnect-Cause Attribute Values
RADIUS s and RADIUS Disconnect-Cause Values The Internet Engineering Task Force (IETF) draft standard specifies a method for communicating vendor-specific information between the network access server
More informationConfiguring Media Antitrombone
Media Trombones are media loops in a SIP entity due to call transfer or call forward. Media loops in Cisco UBE are not detected because Cisco UBE looks at both call types as individual calls and not calls
More informationConfiguring Virtual Private Networks
Configuring Virtual Private Networks This chapter describes how to configure, verify, maintain, and troubleshoot a Virtual Private Network (VPN). It includes the following main sections: VPN Technology
More informationConfiguring Virtual Profiles
Configuring Virtual Profiles This chapter describes how to configure virtual profiles for use with virtual access interfaces. It includes the following main sections: Virtual Profiles Overview How Virtual
More informationISDN Network Side for ETSI Net5 PRI
ISDN Network Side for ETSI Net5 PRI Feature History Release 12.1(T) 12.1(5)XM2 Modification This feature was introduced. Support was added for the Cisco AS5350 and Cisco AS5400 universal gateways. This
More informationPPPoE Session Limit per NAS Port
PPPoE Session Limit per NAS Port First Published: March 17, 2003 Last Updated: February 28, 2006 The PPPoE Session Limit per NAS Port feature enables you to limit the number of PPP over Ethernet (PPPoE)
More informationSSG TCP Redirect for Services
SSG TCP Redirect for Services Feature History Release 12.1(5)DC 12.2(4)B 12.2(16)B Modification This feature was introduced on Cisco 6400 series routers as the HTTP Redirect feature. This feature was integrated
More informationVLAN Range. Feature Overview
VLAN Range Feature History Release 12.0(7)XE 12.1(5)T 12.2(2)DD Modification The interface range command was introduced. The interface range command was integrated into Cisco IOS Release 12.1(5)T. The
More informationConfiguring Client-Initiated Dial-In VPDN Tunneling
Configuring Client-Initiated Dial-In VPDN Tunneling Client-initiated dial-in virtual private dialup networking (VPDN) tunneling deployments allow remote users to access a private network over a shared
More informationThe MSCHAP Version 2 feature (introduced in Cisco IOS Release 12.2(2)XB5) allows Cisco routers to
The feature (introduced in Cisco IOS Release 12.2(2)XB5) allows Cisco routers to utilize Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAP V2) authentication for PPP connections between
More informationRADIUS Vendor-Specific Attributes (VSA) and RADIUS Disconnect-Cause Attribute Values
RADIUS Vendor-Specific Attributes (VSA) and RADIUS Disconnect-Cause Attribute Values First Published: September 23, 2005 Last Updated: August 18, 2010 The Internet Engineering Task Force (IETF) draft standard
More informationRADIUS Tunnel Preference for Load Balancing
RADIUS Tunnel Preference for Load Balancing and Fail-Over Finding Feature Information RADIUS Tunnel Preference for Load Balancing and Fail-Over Last Updated: July 18, 2011 The RADIUS Tunnel Preference
More informationGateway Trunk and Carrier Based Routing Enhancements
Gateway Trunk and Carrier Based Routing Enhancements Feature History Release Modification 12.2(2)XU This feature is introduced for H.323 and SIP interfaces on the Cisco 2600 series, Cisco 3600 series,
More informationPPP/MLP MRRU Negotiation Configuration
PPP/MLP MRRU Negotiation Configuration The PPP/MLP MRRU Negotiation Configuration feature allows a router to send and receive frames over Multilink PPP (MLP) bundles that are larger than the default Maximum
More informationRegulating Packet Flow on a Per-Interface Basis Using Generic Traffic Shaping
Regulating Packet Flow on a Per-Interface Basis Using Generic Traffic Shaping Packet flow on a network can be regulated using a traffic shaping mechanism. One such traffic shaping mechanism is a Cisco
More informationRADIUS Configuration Guide Cisco IOS XE Release 2
RADIUS Configuration Guide Cisco IOS XE Release 2 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387)
More informationRedundant Link Manager (RLM)
Redundant Link Manager (RLM) Feature History Release Modification 11.3(7) This feature was introduced. 12.1(5)XM2 Support was added for the Cisco AS5350 and Cisco AS5400 universal gateways. This document
More informationPPPoE Agent Remote-ID and DSL Line Characteristics Enhancement
PPPoE Agent Remote-ID and DSL Line Characteristics Enhancement The PPPoE Agent Remote-ID and DSL Line Characteristics Enhancement feature provides a method by which the digital subscriber line access multiplexer
More informationConfiguring Virtual Asynchronous Traffic over ISDN
Configuring Virtual Asynchronous Traffic over ISDN Cisco IOS software offers two solutions to send virtual asynchronous traffic over ISDN: Using International Telecommunication Union Telecommunication
More informationConfiguring PPP over Ethernet with NAT
This chapter provides an overview of Point-to-Point Protocol over Ethernet (PPPoE) clients and network address translation (NAT) that can be configured on the Cisco 819, Cisco 860, Cisco 880, and Cisco
More informationUnderstanding and Troubleshooting Idle Timeouts
Understanding and Troubleshooting Idle Timeouts Document ID: 23423 Contents Introduction Prerequisites Requirements Components Used Conventions Common Problems and Symptoms Idle Timeouts Interesting Traffic
More informationQoS Tunnel Marking for GRE Tunnels
The feature introduces the capability to define and control the quality of service (QoS) for both incoming and outgoing customer traffic on the provider edge (PE) router in a service provider network.
More informationIEEE 802.1X Multiple Authentication
The feature provides a means of authenticating multiple hosts on a single port. With both 802.1X and non-802.1x devices, multiple hosts can be authenticated using different methods. Each host is individually
More informationRADIUS Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 920 Series)
RADIUS Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 920 Series) Configuring RADIUS 2 Finding Feature Information 2 Prerequisites for RADIUS 2 Information About RADIUS 2 How to Configure RADIUS
More informationConfiguring SIP AAA Features
This chapter describes how to configure the following SIP AAA features: Configurable Screening Indicator (handled in this document as a subset of SIP - Enhanced Billing Support for Gateways) RADIUS Pre-authentication
More informationConfiguring SIP AAA Features
This chapter describes how to configure the following SIP AAA features: Configurable Screening Indicator (handled in this document as a subset of SIP - Enhanced Billing Support for Gateways) RADIUS Pre-authentication
More informationRADIUS Tunnel Preference for Load Balancing and Fail-Over
RADIUS Tunnel Preference for Load Balancing and Fail-Over Feature History for RADIUS Tunnel Preference for Load Balancing and Fail-Over Release Modification 12.2(4)T This feature was introduced. 12.2(11)T
More informationEncrypted Vendor-Specific Attributes
The feature provides users with a way to centrally manage filters at a RADIUS server and supports the following types of string vendor-specific attributes (VSAs): Tagged String VSA, on page 2 (similar
More informationMPLS VPN Carrier Supporting Carrier
MPLS VPN Carrier Supporting Carrier Feature History Release 12.0(14)ST 12.0(16)ST 12.2(8)T 12.0(21)ST 12.0(22)S 12.0(23)S Modification This feature was introduced in Cisco IOS Release 12.0(14)ST. Support
More informationTACACS+ Configuration Guide, Cisco IOS XE Release 3S
Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 THE SPECIFICATIONS AND INFORMATION
More informationConfiguring TCP Header Compression
Configuring TCP Header Compression First Published: January 30, 2006 Last Updated: May 5, 2010 Header compression is a mechanism that compresses the IP header in a packet before the packet is transmitted.
More informationThis feature was introduced. This feature was integrated into Cisco IOS Release 12.2(27)SBA.
PPPoE Relay The PPPoE Relay feature enables an L2TP access concentrator (LAC) to relay active discovery and service selection functionality for PPP over Ethernet (PPPoE), over a Layer 2 Tunneling Protocol
More informationConfiguring NAS-Initiated Dial-In VPDN Tunneling
Configuring NAS-Initiated Dial-In VPDN Tunneling Network access server (NAS)-initiated dial-in tunneling provides secure tunneling of a PPP session from a NAS to a tunnel server without any special knowledge
More informationImplementing T1 CAS for VoIP
This chapter describes how to implement the T1 Channel-Associated Signaling (CAS) for VoIP feature. This feature adds support for T1 CAS and E1 R2 signaling with the voice feature card (VFC). The T1 CAS
More informationAccess Server Dial In IP/PPP Configuration With Dedicated V.120 PPP
Access Server Dial In IP/PPP Configuration With Dedicated V.120 PPP Document ID: 6306 Contents Introduction Prerequisites Requirements Components Used Conventions Background Information How V.120 Affects
More informationConfiguring TCP Header Compression
Header compression is a mechanism that compresses the IP header in a packet before the packet is transmitted. Header compression reduces network overhead and speeds up the transmission of either Real-Time
More informationMultiprotocol Label Switching (MPLS) on Cisco Routers
Multiprotocol Label Switching (MPLS) on Cisco Routers Feature History Release 11.1CT 12.1(3)T 12.1(5)T 12.0(14)ST 12.0(21)ST 12.0(22)S Modification The document introduced MPLS and was titled Tag Switching
More informationMonitoring PPPoE Sessions with SNMP
The PPPoE Session Count Management Information Base feature provides the ability to use Simple Network Management Protocol (SNMP) to monitor in real time the number of PPP over Ethernet (PPPoE) sessions
More informationCisco MICA Modem Dial Modifiers for Cisco AS5300 and AS5800 Universal Access Servers
Cisco MICA Modem Dial Modifiers for Cisco AS5300 and AS5800 Universal Access Servers June 22, 2001 This feature module describes dial modifier support for Cisco MICA modems through enhanced Cisco MICA
More informationDHCP Server Port-Based Address Allocation
The feature provides port-based address allocation support on the Cisco IOS Dynamic Host Configuration Protocol (DHCP) server for the Ethernet platform. The DHCP server provides address assignment support
More informationVPDN LNS Address Checking
First Published: Sept. 30, 2007 Last Updated: Aug. 28, 2008 The feature allows a Layer 2 Tunnel Protocol (L2TP) Access Concentrator (LAC), that is receiving data from an L2TP Network Server (LNS) to check
More informationGeneric Transparency Descriptor for GKTMP Using SS7 Interconnect for Voice Gateways Version 2.0
Generic Transparency Descriptor for GKTMP Using SS7 Interconnect for Voice Gateways Version 20 Feature History Release 122(2)XU Modification This feature was introduced This document describes the Generic
More informationConfiguring Scalable Hub-and-Spoke MPLS VPNs
Configuring Scalable Hub-and-Spoke MPLS VPNs Last Updated: December 15, 2011 This module explains how to ensure that virtual private network (VPN) clients that connect to the same provider edge (PE) router
More informationPPPoE Session Limits per NAS Port
PPPoE Session Limits per NAS Port The PPPoE Session Limit per NAS Port feature enables you to limit the number of PPP over Ethernet (PPPoE) sessions on a specific permanent virtual circuit (PVC) or VLAN
More informationVoice over IP Q.SIG Network Transparency
Voice over IP Q.SIG Network Transparency Feature History Release 12.0(7)T 12.1(5)XM2 Modification This feature was introduced Support was added for the Cisco AS5350 and Cisco AS5400 universal gateways.
More informationppp accounting through quit
ppp accounting through quit ppp accounting, page 3 ppp authentication, page 5 ppp authentication ms-chap-v2, page 9 ppp authorization, page 11 ppp chap hostname, page 13 ppp chap password, page 15 ppp
More informationPer VRF AAA. Finding Feature Information. Last Updated: January 18, 2012
Per VRF AAA Last Updated: January 18, 2012 The Per VRF AAA feature allows ISPs to partition authentication, authorization, and accounting (AAA) services on the basis of Virtual Private Network (VPN) routing
More information