100 ms. 30 µs; Time per I/O byte. 24 V DC No; Power supply via system power supply. Not relevant for 400 series (300 series set)

Transcription

1 6ES7412-2XJ05-0AB0 SIMATIC S7-400, CPU CENTRAL PROCESSING UNIT WITH: 512 KB WORKING MEMORY, (256 KB CODE, 256 KB DATA), 1. INTERFACE MPI/DP 12 MBIT/S, 2. INTERFACE PROFIBUS DP Product type designation General information Hardware product version 03 Firmware version V5.3 Engineering with Programming package STEP7 V 5.3 SP2 or higher with HW update CiR - Configuration in RUN CiR synchronization time, basic load CiR synchronization time, time per I/O slave 100 ms 30 µs; Time per I/O byte Supply voltage 24 V DC ; Power supply via system power supply Input current from CPU, max. from backplane bus 5 V DC, typ. from backplane bus 5 V DC, max. from backplane bus 24 V DC, max. from interface 5 V DC, max. t relevant for 400 series (300 series set) 0.9 A 1.1 A 300 ma; 150 ma per DP interface 90 ma; At each DP interface Power losses

2 Power loss, typ. Power loss, max. 4.5 W 5 W Memory Type of memory RAM Work memory Integrated integrated (for program) integrated (for data) expandable 512 kbyte 256 kbyte 256 kbyte Load memory expandable FEPROM expandable FEPROM, max. integrated RAM, max. expandable RAM expandable RAM, max. ; with Memory Card (FLASH) 64 Mbyte 512 kbyte ; with Memory Card (RAM) 64 Mbyte Backup present with battery without battery ; all data Battery Backup battery Battery operation Backup current, typ. t relevant 125 µa; (up to 40 C) Backup current, max. 550 µa Backup time, max. See reference manual, module data, Chapter 3.3 Feeding of external backup voltage to CPU 5 to 15 VDC CPU processing times for bit operations, typ. 75 ns

3 for word operations, typ. for fixed point arithmetic, typ. for floating point arithmetic, typ. 75 ns 75 ns 225 ns CPU-blocks DB Number, max ; Number range: 1 to Size, max. 64 kbyte FB Number, max ; Number range: 0 to 7999 Size, max. 64 kbyte FC Number, max ; Number range: 0 to 7999 Size, max. 64 kbyte OB Number, max. Size, max. see instruction list 64 kbyte Number of free cycle OBs 1; OB 1 Number of time alarm OBs 2; OB 10, 11 Number of delay alarm OBs 2; OB 20, 21 Number of time interrupt OBs 2; OB 32, 35 (shortest cycle that can be set = 500 µs) Number of process alarm OBs 2; OB 40, 41 Number of DPV1 alarm OBs 3; OB Number isochronous mode OBs Number of multicomputing OBs 2; OB ; OB 60 Number of background OBs 1; OB 90 Number of startup OBs 3; OB Number of asynchronous error 9; OB 80-88

4 OBs Number of synchronous error OBs 2; OB 121, 122 Nesting depth per priority class 24 additional within an error OB 1 Counters, timers and their retentivity S7 counter Number Retentivity can be set lower limit 0 upper limit preset Z 0 to Z 7 Counting range lower limit 0 upper limit 999 IEC counter present Type Number SFB Unlimited (limited only by RAM capacity) S7 times Number Retentivity can be set lower limit 0 upper limit preset times retentive Time range

5 IEC timer lower limit 10 ms upper limit s present Type Number SFB Unlimited (limited only by RAM capacity) Data areas and their retentivity retentive data area, total Total working and load memory (with backup battery) Flag Number, max. Retentivity available 4 kbyte; Size of bit memory address area Retentivity preset MB 0 to MB 15 Number of clock memories 8; in 1 memory byte Data blocks Number, max ; Number range: 1 to Size, max. 64 kbyte Local data adjustable, max. preset 8 kbyte 4 kbyte Address area I/O address area Inputs Outputs 4 kbyte 4 kbyte of which, distributed MPI/DP interface, inputs 2 kbyte MPI/DP interface, outputs 2 kbyte DP interface, inputs 4 kbyte DP interface, outputs 4 kbyte Process image

6 Inputs, adjustable Outputs, adjustable Inputs, default Outputs, default consistent data, max. Access to consistent data in process image 4 kbyte 4 kbyte 128 byte 128 byte 244 byte Subprocess images Number of subprocess images, max. 15 Digital channels Inputs Outputs Inputs, of which central Outputs, of which central Analog channels Inputs Outputs Inputs, of which central Outputs, of which central Hardware configuration Expansion devices, max. 21 connectable OPs 31 Multicomputing ; 4 CPUs max. (with UR1 or UR2) Interface modules Number of connectable IMs (total), max. Number of connectable IM 460s, max. 6 6 Number of connectable IM 4; IM 463-2

7 463s, max. Number of DP masters Integrated 2 via IM Via CP Mixed mode IM + CP permitted 10; CP Extended ; IM 467 not suitable for use with CP Ext. and CP443-1 EX4x, EX20, GX20 (in PNIO mode) via interface module 0 Number of pluggable S5 modules (via adapter capsule in central device), max. 6 Number of IO Controllers Integrated 0 Via CP 4; mixed operation of CP443-1 EX40 and CP443-1 EX 41/EX20/GX20, max. 4 in central controller Number of operable FMs and CPs (recommended) FM CP, point-to-point Limited by number of slots and number of connections CP 440: Limited by number of slots; CP 441: Limited by number of slots and number of connections PROFIBUS and Ethernet CPs 14; Of which 10 CPs max. or IMs as DP master, 4 PROFINET controller maximum Slots Required slots 1 Time of day Clock Hardware clock (real-time clock) battery-backed and synchronizable Resolution Deviation per day (buffered), 1 ms 1.7 s; Power off

8 max. Deviation per day (unbuffered) max. 8.6 s; For power On Operating hours counter Number 16 Number/Number range 0 to 15 Range of values SFCs 2, 3 and 4: 0 to hours SFC 101: 0 to 2^31-1 hours Granularity retentive 1 hour Clock synchronization supported to MPI, master to MPI, slave to DP, master to DP, slave in AS, master in AS, slave on Ethernet via NTP to IF 964 DP ; Via CP Time difference in system when synchronizing via MPI, max. 200 ms Digital outputs integrated channels (DO) 0 Analog inputs Interfaces Interfaces 1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP Number of USB interfaces 0 Number of parallel interfaces 0

9 Number of 20 ma interfaces (TTY) 0 Number of RS 232 interfaces 0 Number of RS 422 interfaces 0 Number of other interfaces 0 1st interface Interface type Physics Isolated Power supply to interface (15 to 30 V DC), max. Integrated RS 485 / PROFIBUS + MPI 150 ma Number of connection resources MPI: 32, DP: 16 Functionality MPI DP master DP slave MPI Number of connections Transmission rate, max. 32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1 12 Mbit/s Services PG/OP communication Routing Global data communication S7 basic communication S7 communication S7 communication, as client S7 communication, as

10 server DP master Number of connections, max. Transmission rate, max. 16; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1 12 Mbit/s Number of DP slaves, max. 32 Services PG/OP communication Routing Global data communication S7 basic communication S7 communication S7 communication, as client S7 communication, as server Equidistance mode support Isochronous mode SYNC/FREEZE Activation/deactivation of DP slaves Direct data exchange (slave-to-slave communication) DPV1 Address area Inputs, max. 2 kbyte Outputs, max. 2 kbyte

11 User data per DP slave User data per DP slave, max. 244 byte Inputs, max. 244 byte Outputs, max. 244 byte Slots, max. 244 per slot, max. 128 byte DP slave Number of connections 16 GSD file Transmission rate, max. Automatic baud rate search Address area, max. User data per address area, max. User data per address area, of which consistent, max Mbit/s 32; Virtual slots 32 byte 32 byte Services PG/OP communication ; with interface active S7 routing ; with interface active Global data communication S7 basic communication S7 communication S7 communication, as client S7 communication, as server Direct data exchange (slave-to-slave

12 communication) DPV1 Transfer memory Inputs 244 byte Outputs 244 byte 2nd interface Interface type Physics Isolated Power supply to interface (15 to 30 V DC), max. Integrated RS 485 / PROFIBUS 150 ma Number of connection resources 16 Functionality DP master DP slave DP master Number of connections, max. 16 Transmission rate, max. 12 Mbit/s Number of DP slaves, max. 64 Services PG/OP communication Routing Global data communication S7 basic communication S7 communication S7 communication, as client S7 communication, as server

13 Equidistance mode support Isochronous mode SYNC/FREEZE Activation/deactivation of DP slaves Direct data exchange (slave-to-slave communication) DPV1 Address area Inputs, max. 4 kbyte Outputs, max. 4 kbyte User data per DP slave User data per DP slave, max. 244 byte Inputs, max. 244 byte Outputs, max. 244 byte Slots, max. 244 per slot, max. 128 byte DP slave Number of connections 16 GSD file Transmission rate, max Mbit/s Address area, max. 32 User data per address area, max. User data per address area, of which consistent, max. 32 byte 32 byte Services

14 Routing Transfer memory Inputs 244 byte Outputs 244 byte Isochronous mode Isochronous operation (application synchronized up to terminal) Number of DP masters with isochronous mode User data per isochronous slave, max. equidistance ; For PROFIBUS only byte shortest clock pulse 1.5 ms; 0.5 ms without use of SFC 126, 127 max. cycle 32 ms Communication functions PG/OP communication Number of connectable OPs without message processing Number of connectable OPs with message processing Data record routing 31 31; When using alarm_s and alarm_d Global data communication supported Number of GD loops, max. 8 Number of GD packets, transmitter, max. Number of GD packets, receiver, max. Size of GD packets, max. Size of GD packet (of which consistent), max byte 1 variable

15 S7 basic communication supported User data per job, max. User data per job (of which consistent), max. 76 byte 1 variable S7 communication supported as server As client User data per job, max. User data per job (of which consistent), max. 64 kbyte 462 byte; 1 variable S5-compatible communication supported User data per job, max. User data per job (of which consistent), max. Number of simultaneous AG- SEND/AG-RECV orders per CPU, max. ; Via FC AG_SEND and AG_RECV, max. via 10 CP or kbyte 240 byte 24/24 Standard communication (FMS) supported ; Via CP and loadable FB Open IE communication ISO-on-TCP (RFC1006) Via CP and loadable FB Web server Data length, max bytes via CP Adv. supported Number of connections overall 32

16 usable for PG communication reserved for PG communication Adjustable for PG communication, max. 1 0 usable for OP communication reserved for OP communication adjustable for OP communication, max. 1 0 usable for S7 basic communication Reserved for S7 basic communication adjustable for S7 basic communication, max. 0 0 usable for S7 communication reserved for S7 communication Adjustable for S7 communication, max. 0 0 usable for routing Reserved for routing 0 adjustable for routing, max. 0 S7 message functions Number of login stations for message functions, max. Symbol-related messages SCAN procedure Block related messages 31; Max. 31 with alarm_s and alarm_d (OP's); max. 8 with alarm_8 and alarm_p (e.g. WinCC)

17 Process diagnostic messages simultaneously active Alarm-S blocks, max. Alarm 8-blocks Number of instances for alarm 8 and S7 communication blocks, max. 250; Simultaneously active alarm_s/sq blocks or alarm_d/dq blocks 300 preset, max. 150 Process control messages Number of archives that can log on simultaneously (SFB 37 AR_SEND) 4 Number of messages overall, max. 256 in 100 ms grid, max. 0 in 500 ms grid, max. 256 in 1000 ms grid, max. 256 Number of additional values with 100 ms grid, max. 0 with 500, 1000 ms grid, max. 1 Test commissioning functions Status block Single step ; Up to 2 simultaneously Number of breakpoints 4 Status/control Status/control variable Variables Number of variables, max. ; Up to 16 variable tables Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters 70; Status/control Forcing Forcing

18 Force, variables Inputs, outputs, bit memories, peripheral inputs, peripheral outputs Number of variables, max. 64 Diagnostic buffer present Number of entries, max. 400 can be set preset 120 EMC Emission of radio interference acc. to EN Limit class A, for use in industrial areas Limit class B, for use in residential areas Configuration Configuration software STEP 7 programming Command set see instruction list Nesting levels 7 Access to consistent data in process image System functions (SFC) System function blocks (SFB) see instruction list see instruction list Programming language LAD FBD STL SCL CFC

19 GRAPH HiGraph Number of simultaneously active SFCs DPSYC_FR 2 D_ACT_DP 8 RD_REC 8 WR_REC 8 WR_PARM 8 PARM_MOD 1 WR_DPARM 2 DPNRM_DG 8 RDSYSST 8 DP_TOPOL 1 Number of simultaneously active SFBs RD_REC 8 WR_REC 8 Know-how protection User program protection/password protection Dimensions Width Height Depth 25 mm 290 mm 219 mm Weights Weight, approx. 0.7 kg last modified: