INSTALLATION MANUAL LED TV*

Transcription

1 INSTALLATION MANUAL LED TV* Please read this manual carefully before operating your set and retain it for future reference. UV3***-U*

2 2 TABLE OF CONTENTS TABLE OF CONTENTS 3 LOCATION AND FUNCTION OF CONTROLS 3 Parts and Button 27 Customer Computer 27 RS-232C Configurations 28 Communication Parameters 28 Command reference list 29 / Receiving Protocol OK nowledgement 29 - Error nowledgement 29 - Real data mapping (Hexadecimal : Decimal) 4 EZMANAGER 4 LANGUAGE & COUNTRY SELECTION 5 INSTALLATION MENU 5 INTRODUCTION 6 PUBLIC DISPLAY SETTINGS 6 - Public Display Settings Operation 6 - Power On Status 7 - Volume 7 - Key Management 8 - Limited Mode 8 - DTV Channel Update 9 - Power On Default 9 - Aux Source Setting 9 - Power Management 9 - Factory Reset 10 NETWORK 10 - MAC Address 10 - Network Setting 11 - Wake On LAN 11 - Server Settings 12 GENERAL 12 - Configuration Setup 14 - External Speaker 14 - Set ID Setup 14 - Power Saving 15 HCEC Setup 16 - Clock Setup 17 Password Change 17 Lock Mode 17 Crestron 17 Welcome Video 18 TV MANAGER 18 - USB Download Menu 25 KEY CODES 26 EXTERNAL CONTROL DEVICE SETUP 26 USB to Serial converter with USB Cable 26 RS-232C with RS-232C Cable 26 - DE9 (D-Sub 9 pin) Type 26 - Phone jack Type 27 Set ID

3 LOCATION AND FUNCTION OF CONTROLS 3 LOCATION AND FUNCTION OF CONTROLS Parts and Button Screen Remote control and Intelligent 1 sensors Power Indicator Button 2 Button 2 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 Button - This button is located below the TV screen. NOTE You can set the power indicator light to on or off by selecting General in the main menus.

4 4 EZMANAGER EzManager Image shown may differ from your TV. LANGUAGE & COUNTRY SELECTION Please select the Language and Country. Some countries need to select the Time Zone.

5 INSTALLATION MENU 5 Installation Menu Image shown may differ from your TV. INTRODUCTION The abundant functions for Hotel TV linked with software installation can be projected on OSD as Installation Menu. The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV s easy installation and convenient operation for Hotelier and System Integrators. 1 Press the Setting button for more than 5 seconds using the user remote control, Channel information will appear at top left on the screen. 2 Enter a four digit password and press OK button. The TV is set with the initial password Use the button to select the desired menu.

6 6 INSTALLATION MENU PUBLIC DISPLAY SETTINGS 1 Use the button to select the PUBLIC DISPLAY SETTINGS. 2 Use the OK button and then button to select Public Display Mode. When Public Display Mode is set to On (Work), all functions of Public Display Mode apply. Public Display Settings Operation Decide to work all functions of Public Display Mode or not by setting Public Display Mode as On(Work) or Off(Do Not Work) - When Public Display Mode is set to On(Work), all functions of Public Display Mode apply. When Public Display Mode is set to Off(Do Not Work), all functions of Public Display Mode Do Not apply. When it is set to On, Key Lock item of the User menu is disabled and the OSD is displayed same to the Local Key Operation setting of the Public Display Mode. When it is set to On, all items reserved at the Schedule list are deleted and the reservation function is not supported.(applied for the model offering the reservation function) - The TV triggered by the external device (ex: SIMPLINK, TVLink-Tuner, etc.) operates separately from the Public Display Mode. When it is set to On, User Menu General Reset to Initial Settings and Demo Mode are disabled. When Public Display Mode is set to On(Work), all skipped programs are not tuned by number keys. When Public Display Mode is set to On(Work), Detailed Information about the Channel is not available in the EPG. Power On Status Decide to select working status of TV Set when turn on main power. You can set with PWR, STD, LST. PWR always make TV set On status when turn on main power. STD make Stand-by status when turn on main power. LST make TVSet work like previous power status. As same concept as Power Backup mode; If main power were turned off in Power On status, TVSet would work in On status. If main power were turned off in Stand-by status, TVSet would work in Stand-by status. If there Block All is both IR Operation and Local Key Operation from Key Management, In order to provide the Option that must be able to turn on the TV in the TV turned off situation, change the value of the PWR. (Reference the Key Management)

7 INSTALLATION MENU 7 Volume Decide to apply volume policy of Start Volume, Maximum Volume and Minimum Volume as On(Work) or Off(Do Not Work). (0 Min Start Max 100) Start Volume This entry sets the start volume level when is power on. The level is specified as a number between minimum volume to maximum value. (Min Start Max) The default setting is Off (disabled). When enabled, if the value is lower then the minimum specified in the minimum volume entry, the minimum volume entry must be used. When enabled, if the value is larger then the maximum specified in the maximum volume entry, the maximum volume value must be used. Access to a volume in On Timer must be fixed to start volume when Hotel Mode Operation (On) and Start Volume (Off, 0 ~ 100) were set simultaneously. Maximum Volume This entry sets the maximum volume level the set. The level is specified as a number between Minimum Volume to 100. (Min Max 100). If the command volume up to higher than maximum volume is received, that should be ignored. The default value is 100. Minimum Volume This entry sets the minimum volume level the set will produce. The level is specified as a number between 0 to Maximum Volume. (0 Min Max) If the command volume down to lower than minimum volume is received, that should be ignored. The default value is 0. Key Management Manage key usability of Local(Front) Key and Remote Control. When selected to On, following IR Operation and Local Key Operation will be worked by below. IR Operation Decide whether work the LG remote control or not. When IR Operation is set to Normal, all remote keys are available. Use PWR Only makes block all remote keys except power key. When IR Operation is set to Block All, all normal remote keys don t work. Local Key Operation Decide to operate Local/Front Key working behavior by setting Local Key Operation as Normal, Use PWR Only and Block All. When Local Key Operation is set to Normal, all local keys are available. Use PWR Only makes block all local keys except power key. When Local Key Operation is set to Block All, all local keys don t work.

8 8 INSTALLATION MENU Limited Mode Configure TV function s limitation. When selected to On, following sub-menus will be worked by below. Setup Menu Permit to tune and manage Channels as On (permitted) or Off (not permitted). Channel Change Decide to change channel or not by setting Program Change as On (Change Possible) or Off (Change Impossible) when present source is TV. When Channel Change is set to Off (Change Impossible)»» Program Key, Numeral Key, List Key, Q.View Key don t work and entering Channel Menu in the Main Menu OSD is impossible.»» Channel item in On Time menu will be fixed.»» Entering Channels in the Main Menu OSD is impossible regardless of Channels item. When Program Change is set to On(Change Possible), Program Key, Numeric Key, List Key, Q.View Key, TV/RAD Key, does work and entering Channel Menu in the Main Menu OSD is possible. Menu Display Function to decide whether work with menu (including relevant menus too) of control key (On Enter possible) or not (Off Enter Impossible). Although select Off(Enter impossible), the action that press a Menu button for 5 seconds to enter Installation Menu is available. When select On(Enter possible), Menu works. OSD Display Decide to display OSD or not by setting OSD Display as On(Display) or Off(Do not Display). When OSD Display is set to Off (Do not Display), all OSD is not displayed except some exception. Although select Off (Do not Display), the action that press a Menu button for 5 seconds to enter Installation Menu and entering service menu are available. (In-Start, Power-Only, Adjust, Installation Menu ) System Provider Mode System Provider Mode allows access to the menu system from the front panel or remote control but access is controlled as follows: When value is On, Accessible Items on the menu system, others are not permissible.»» Input select screens»» Sleep timer»» Aspect Ratio»» Subtitles»» Channels (Except for Channel Tuning & Settings and Channel Manager)»» Safety / Photo & Video / Music / Network / Bluetooth Menu If the channel map is empty, Auto-tuning guide dialog should be blocked by pressing List, CH+, CH- keys. DTV Channel Update It is a mode to set whether to update dtv Channel automatically or not. When DTV Channel Update is set to Auto, the function to update TV s Channel map according to dtv Channel s stream information. DTV Channel Update is set to Manual, the function to keep TV s Channel map even though dtv Channel s information is changed.

9 INSTALLATION MENU 9 Power On Default Set the channel to display and Volume Level, etc. when turn on power in AC Power On or Standby status. Set to On(Work) or Off(Do Not Work). When Power On Default is set to Off, it is not applied to the subordinate Input, Channel, A/V Setting, Aspect Ratio menu. When Power On Default is set to On, it can set by entering the subordinate menu. Input Set whether it is turned on by the set input source or by the last stored input source. Channel Select start channel number if Input source s value is TV. A/V Setting If A/V Setting is changed from Off to On, A/V parameters that are set before entering Installation Menu are applied whenever turn on power. Aspect Ratio The aspect ratio determines the default aspect ratio that the set returns to on power up. Aux Source Setting Set to On(Work) or Off(Do Not Work). The Auxiliary (Input) Source Setting feature will enable or disable for each external input. User cannot disable the current input s Aux Source Setting. Power Management The Power Management feature will turn off the television receiver if no input control command is received from either the Local or IR Key within a selected hours. Activity on either of these inputs shall reset the Power Management timer and prevent interruption of TV viewing. This entry can be set to a value which is corresponding to the desired hours (1Hour to 7Hours). Default value is Off(disabled). Factory Reset Change all settings to their default values.

10 10 INSTALLATION MENU NETWORK (Depending on model) 1 Use the button to select the NETWORK. MAC Address Displays the MAC address (not customizable). Network Setting One-click network connection Connects easily to a wired/wireless network. Network Connection to connect to an available network automatically. Follow the prompts on the TV. To connect to a network through Set Expert For use in special circumstances such as in offices (in cases where a static IP is used). 1 Select a network connection, either Wired or Wireless. 2 When connecting via Wired, Configures the IP settings of the TV set. You can set the IP address, subnet mask, gateway and DNS server. 3 When connecting via Wi-Fi, use the one of the following network connection methods. AP List Enter the SSID WPS-PBC WPS-PIN Advanced Wi-Fi Settings Connects to the network selected from the AP List. Connects to the wireless AP typed in. Connects easily when the button of a wireless AP supporting PBC is pressed. Connects easily when the PIN of the wireless AP that you wish to connect to is entered in to the AP website. After connects Wi-Fi, you can set the IP address, subnet mask, gateway and DNS server.

11 INSTALLATION MENU 11 Wake On LAN Sets the Wake On LAN function to Enable or Disable. The Wake On LAN feature enables the TV to receive software updates and/or be powered ON upon receipt of Wake Up Frame packets and/or Magic Packet data via the wired LAN. To facilitate use of this feature, note that the appropriate wired connection must be made. ( Wake up Frame is not supported depending on model) Server Settings Sets the information to connect to the external server. Supersign Premium Server (Depending on model ) Supersign Link Server (Depending on model )

12 12 INSTALLATION MENU GENERAL Configuration Setup Select RCU It is a mode to set whether to use Select RCU or not. When Select RCU is set to Enable, You can adjust Number of RCU menu. Number of RCU It is a mode to set Number of RCU. Number of RCU value range 1~9. (When Select RCU is set to Enable ) Number of RCU value range 0. (When Select RCU is set to Disable ) * RCU(Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV. DTV Channel Update It is a mode to set whether to update DTV Channel automatically or not. When DTV Channel Update is set to Auto, the function to update TV s Channel map according to dtv Channel s stream information. DTV Channel Update is set to Manual, the function to keep TV s Channel map even though DTV Channel s information is changed. On Timer Operation - - It is a mode to select On Timer Operation working one time or repeatedly. Once : On Time in the user menu operates only one time when the On Time menu is set to ON. Repeat : On Time operates repeatedly when the On Time menu is set to ON.

13 INSTALLATION MENU 13 15Min Auto Off When 15Min Auto Off is set to Enable, TV will turn off if there is no signal in 15Min. Auto Sensing If Auto Sensing is set to On, the input is automatically switched when the input signal that you set to ON is received. If Auto Sensing is set to Disable, the input is not switched when the input signal is received. * SIMPLINK and Auto Sensing cannot work simultaneously. If SIMPLINK is set to On, Auto Sensing is automatically set to Disable. * If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns to the previous setting. If the several input are connected by enabling Auto Sensing and the automatic input returns to the previous setting. If the several inputs are connected by enabling Auto Sensing and the automatic input switch is performed several times, the input returns to the previous setting only for the last input and does not repeat the operation for the rest. DPM (Depending on model ) You can configure the DPM (Display Power Management) function. If this option is not set to Off, the TV set enters the DPM mode when there is no input signal. If you set this option to Off, the DPM function is disabled.

14 14 INSTALLATION MENU External Speaker Volume Control Selects the volume control method of an external speaker. You can select Off, Int Variable, Fixed., Ext Variable by ^ pressing button. Ext Variable uses the External Vol Up/Down Control Line to change the volume up to 1 Watts. Int variable is linked to the main volume OSD and change the volume 0-1 Watts. Fixed produces a fixed output. The default is Off. Output This item is enabled when Volume Control is set to Fixed. You can choose one of 7 steps. (0.01/0.03/0.05/0.1/0.2/0.5/1 Watts). The Default is 1 Watt. Set ID Setup Set ID Lock Set the Set ID item in GENERAL Menu whether to activate or not. Set to On(Work) or Off(Do Not Work). Set ID Set the Set ID of TV Set with 1~99. Power Saving Static Saving It is the item for setting the level to reduce the backlight control from the items for saving the consuming power, which is increased or decreased by 10 steps from 0 to makes the consuming power set to the same one from the TV. 0 reduces the consuming power to the minimum. The default value is 100. * The value displayed at the OSD is not changed and only the actual setting value is converted to percentage based on the static saving value to set. * 0 ~ 30: HIGH, 40 ~ 60 : MID, 70 ~ 90 : LOW, 100 : OFF Keyless Off Hours Automatically TV will be turned off if there is no key input for the preset time period. When it is set to Enable, User Menu -> Timer -> Auto Power Off is disabled. When it is set to Enable, User Menu -> Timer -> 2Hour Auto Power Off is disabled.

15 INSTALLATION MENU 15 HCEC Setup CEC Mode You will have 3 modes to choose [Default], [HCEC] and [TVLink-CEC]. If [Default] is selected, you can use SIMPLINK which is provided in LG TV. Also you can enable and disable SIMPLINK through SIMPLINK MENU. If [HCEC] is selected, you can use TVLink-HCEC Protocol. For more detailed information, please refer to TVLink-HCEC Protocol document) If [TVLink-CEC] is selected, TV will not directly work for key input except for power key. And volume related keys will work just in case of Follower volume control mode. (for more detailed information regarding the scenario of volume control, please refer to TVLink-CEC protocol document) IR Decoding When IR Decoding is set to Enable, the TV decodes and changes it into a CEC Message and sends it to Command via the HDMI CEC Line. The default value is Disable. Device ID Sets the ID of a device(logical Address) connected to the CEC Line. You can choose between All and E. The default value is All.

16 16 INSTALLATION MENU StandBy Set the sending and receiving scenario of OpStandBy(0x0c) command. Ths detailed scenario is described on the table below. Send Receive Send Only O X Receive Only X O All O O Off X X Forced Initialize This setting will be enabled When CEC mode is set as TVLink-CEC If Enable is selected, TV will change its input source to HDMI1 by any HDMI-CEC simulation from a device. HTNG Public Display Mode If you use following functions via TVLink-HCEC, HTNG Hotel mode will be set as Yes automatically. (*Power On Default, Start Volume, Maximum Volume, Minimum Volume, or Start Volume) Even if Public Display Settings Operation is set as No, above settings are still effective. Clock Setup Clock Source You can select Off, TV, NTP, Admin by pressing button. NTP : Clock is synchronized using Network Time Protocol. It's only enabled when network cable is connected. Admin : It's automatically set to Admin when clock is updated by commercial protocols like TVLink-HCEC, TVLink-Interactive, or HCAP API. Off : Clock is synchronized using any available clock source. TV : Clock is synchronized using particular TV program.

17 INSTALLATION MENU 17 * Input (Depending on model) You can select 'Input' according to 'Clock Source'. You can select TV source when Clock Source is 'TV'. Input is set to 'None', 'HCAP', 'Protocol', 'HTNG' automatically when Clock Source is 'Admin'. * Program/Frequency (Depending on model) You can select Program when Clock Source is 'TV' * Timezone(City) /Timezone(Custom) /Timezone(Offset) (Depending on model) In the case when there is difference between the time information received from the Teletext and the time of the current area, it can be set up to correct this. The initial value is 0, and it can be changed in the range of -12Hrs ~ +14Hrs. (Timezone(Offset) range is -12Hrs ~ +12Hrs) Password Change To ensure more security, Password can be changed by installers own design. 1 Change password by using virtual keyboard. 2 Input the password again for confirmation. Lock Mode If Lock Mode is Yes, the following features will be unavailable. * USB - If it is set to Enable,USB devices do not work in relative features.(exclude S/W update). * Factory Reset - If it is set to Enable, User Menu -> General -> Reset to Initial Settings is disabled. Crestron This function enables synchronization with applications provided by Crestron. Server: This menu sets the server s IP address for the network connection with the server (equipment provided by Crestron). Port: This menu sets the port for the network connection with the server. The default port number is IP ID: This menu sets a unique ID for synchronizing with the application. Welcome Video * Welcome video Mode You can set to Off, Once or Repeat * Video Download You can download video file from USB Video file locate LG_DTV folder

18 18 INSTALLATION MENU * Reset Delete Downloaded video file * Operation The video displays after your TV is turned on and the boot logo appears If Welcome Video is enabled and a video is downloaded on the TV, the video plays The time it takes a video to be displayed may differ depending on the decoding time of the video. Controls for playing the video are not available. (Pause, stop, fast forward, etc.) Videos in any file format that the TV supports can be downloaded and displayed. TV MANAGER USB Download Menu * USB Cloning : An Installer can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the same Master TV Setup: Public Display Mode Installation Menu settings, User A/V settings and the Channel Map. This newer procedure significantly decreases the installation time that would be necessary if the standard RS-232C method were used instead. 1 Overview USB Cloning Procedure : Commercial TVs have the capability to support cloning internal TV data and Channel information with an external clone device called USB Cloning, in order to copy TV data accurately and quickly. The clone internal functions use slightly different internal processes for the two types of commercial TVs. However, the UI of cloning feature remains the same in both. Regarding the demands over the current cloning feature for quicker cloning, better portability and etc, we would like to announce the cloning process via USB port, named as USB Cloning. USB cloning process is divided into 2 main processes. One is writing the previously saved TV data into the TV, and one another is reading of current TV data into USB memory card. To avoid any confusion due to the words, it is clearly specified as Import Clone File and Export Clone File in the whole process. 2 Data To Be Cloned : The data cloned are the same data cloned by previous USB Cloning. Details are explained in the following: TV data includes :»» A. Installer Menu settings»» B. Main menu settings (Audio, Picture etc) Analog / Digital Channel information includes:»» A. Channel numbers»» B. Channel label»» C. Channel attributes including channel type, skipping status and etc. 3 Input Source : The user needs a USB memory card with FAT formatted to make successive cloning via USB port. NOTE Currently, support the preceding USB file system for FAT file format only. Other file formats including NTFS is not currently supported. Microsoft Windows officially supports FAT for the USB memory card. Only a USB storage device is recognizable.

19 INSTALLATION MENU 19 Ez Download Ez Download is a function that enables users to download the desired items all at once, such as EPK (software update file), TLL, Logo Image, Background Images, Micom. * Images and EPK files should be copied into the folder named LG_DTV on the USB. TLL files should be copied to the root folder of the USB. If you press EZ Download menu, EZ Download is launched. If.DZM file exist file will be selected previously download file. NOTE If the DZM file is still in the USB after the download is complete: An Ez Download pop-up window will appear and list the file types, such as TLL,Logo Image,Background Images,EPK or Micom with the previously downloaded lists checked automatically. If the global TLL and model TLL files exist in the same USB root directory, then only the global TLL will be shown. If the global TLL has been deleted, then the model TLL will be shown.

20 20 INSTALLATION MENU Logo Image Download If there are more than two USB Memory Device, It is possible to select the USB. The download sequence is Logo Image Download -> Select Image -> UPDATE. NOTE Splash Image update function supports only JEPG,BMP format file of less than 8 MB filesize. We recommend you that splash image resolution match the TV`s panel resolution. Max resolution of splash image : Full HD 1920 x 1080, HD 1360 x 768. Min resolution of splash image : Full HD 64 x 64, HD 64 x 64. TV keep splash image until you change a new splash image. The target file is located in LG_DTV folder.

21 INSTALLATION MENU 21 Update TV Software This feature update EPK of TV through the hex file in USB. The target file is located in \LG_DTV folder. If there are more than two USB memory Device, It is possible to select the USB. The download sequence is Update TV Software -> Select file(epk) -> UPDATE.

22 22 INSTALLATION MENU Update Micom Software This feature update MICOM of TV through the txt file in USB. The target file is located in \LG_DTV folder If there are more than two USB memory Device, It is possible to select the USB. The download sequence is Update Micom Software -> Select file(micom) -> UPDATE.

23 INSTALLATION MENU 23 Import Clone File - - Once the internal TV data and its channel map information is written to the USB memory card, the user can start Import Clone File process with the data file generated and stored in USB memory card. As previously warned in Export Clone File process, the user should not turn TV off nor unplug the USB memory card. The following images might be slightly different than the OSD image.

24 24 INSTALLATION MENU Export Clone File - - "Export Clone File must be done first before Import Clone File process, as it generate the file to be used in Export Clone File. While writing is in process, the user must not turn TV off nor unplug the USB memory card. The following images might be slightly different than the OSD image.

25 KEY CODES 25 Key Codes This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 R/C Button 52 R/C Button 01 R/C Button 61 R/C Button 02 R/C Button 63 R/C Button 03 R/C Button 71 R/C Button 06 R/C Button 72 R/C Button 07 R/C Button 79 R/C Button 08 (Power) R/C Button 4C R/C Button 09 R/C Button 5B R/C Button 0B R/C Button 0A R/C Button 1A R/C Button 8E R/C Button 0F R/C Button 8F R/C Button Number Key 0-9 R/C Button 0E R/C Button 45 R/C Button AA R/C Button 28 R/C Button B0 R/C Button 30 R/C Button B1 R/C Button 39 R/C Button BA R/C Button 40 R/C Button 1E R/C Button 41 R/C Button 4D R/C Button 43 R/C Button 91 R/C Button 44 R/C Button Key code 4C (0x4C) is available on ATSC / ISDB models which use major / minor channel. (For South Korea, Japan, North America, Latin America except Colombia models)

26 26 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP (Image shown may differ from your TV.) Connect the USB to Serial converter/rs-232c input jack to an external control device (such as a computer or an A/V control system) to control the product s functions externally. Note: The type of control port on the TV can be different between model series. Please be advised that not all models support this type of connectivity. Cable is not provided. USB to Serial converter with USB Cable USB Type (PC) USB IN (TV) LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter which is not made nor provided by LG. It can be purchased from computer stores that carry accessories for IT support professionals. RS-232C with RS-232C Cable DE9 (D-Sub 9 pin) Type You need to purchase the RS-232C (DE9, D-Sub 9 pin female-to-female type) to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual. The connection interface may differ from your TV. (PC) (PC) (PC) RS-232C IN (CONTROL & SERVICE) USB USB IN IN (TV) (TV) (TV) Phone jack Type 1 3 RS-232C IN (CONTROL & SERVICE) You need to purchase the phone-jack to RS-232C cable required RS-232C IN for the connection between the (CONTROL & SERVICE) (TV) PC and the TV, which is specified in the manual. (TV) For other models, connect to the USB port. 2 The connection interface may differ from your TV. (PC) (PC) SERVICE ONLY (PC) (PC) SERVICE SERVICE ONLY ONLY RS-232C IN (CONTROL & SERVICE) (TV) (TV) or (PC) (PC) RS-232C IN (CONTROL & SERVICE) RS-232C IN (CONTROL & SERVICE) (TV) (TV)

27 EXTERNAL CONTROL DEVICE SETUP 27 Set ID For Set ID number, see Real Data Mapping. 1 Press to access the main menus. 2 Press the Navigation buttons to scroll to General Set ID and press. 3 Press the Navigation buttons to scroll to SET ID and press. 4 Scroll left or right to select a set ID number and select,,. The adjustment range is When you are finished, press. * (Depending upon model) Customer Computer RS-232C (Serial port) RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) PC TV RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DTR DSR 6 4 DSR RTS 7 8 RTS CTS 8 7 CTS D-Sub 9 D-Sub 9 3-Wire Configurations (Not standard) PC TV RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DTR DSR 6 4 DSR RTS 7 8 RTS CTS 8 7 CTS D-Sub 9 D-Sub 9

28 28 EXTERNAL CONTROL DEVICE SETUP Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None Stop bit : 1 bit Communication code : ASCII code Use a crossed (reverse) cable. Command reference list (Depending upon model) COMMAND 1 COMMAND 2 DATA (Hexadecimal) COMMAND 1 COMMAND 2 DATA (Hexadecimal) 01. Power* k a 00 to Treble k r 00 to Aspect Ratio k c (page 30) 14. Bass k s 00 to Screen Mute k d (page 30) 15. Balance k t 00 to Volume Mute 05. Volume Control k e 00 to Color (Colour) x u 00 to 64 Temperature k f 00 to Equalizer j v (page 32) 06. Contrast k g 00 to Brightness 08. Color/ Colour k h 00 to 64 k i 00 to Energy Saving j q 00 to Tune m a (page 33) Command 20. Channel (Programme) Add/ m b 00 to 01 Del(Skip) 09. Tint k j 00 to Key m c Key Codes 22. Control m g 00 to Backlight, k k 00 to 32 Sharpness Control Panel Light 11. OSD Select 12. Remote Control Lock Mode k l 00 to 01 k m 00 to Input select (Main) x b (page 35) 24. Auto j u (page 35) Configure * Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not executed and treated as NG. With RS-232C cable, TV can communicate ka command in power-on or power-off status. But with USB-to-Serial converter cable, the command works only if TV is on.

29 EXTERNAL CONTROL DEVICE SETUP 29 / Receiving Protocol [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to 0, every connected set can be controlled. * [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0 x 00 to 0 x 63) on transmission/receiving protocol. [DATA] : To transmit command data (hexadecimal). Transmit FF data to read status of command. [Cr] : Carriage Return - ASCII code 0 x 0D [ ] : Space ASCII code 0 x 20 OK nowledgement [Command2][ ][Set ID][ ][OK][Data][x] The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. Error nowledgement [Command2][ ][Set ID][ ][NG][Data][x] The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data 00: Illegal Code Real data mapping (Hexadecimal : Decimal) When you enter the [data] in hexadecimal, refer to following conversion table. Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number. 00 : Step 0 32 : Step 50 (Set ID 50) FE : Step : Step 1 (Set ID 1) 33 : Step 51 (Set ID 51) FF : Step A : Step 10 (Set ID 10) 63 : Step 99 (Set ID 99) : Step F : Step 15 (Set ID 15) C7 : Step E : Step : Step 16 (Set ID 16) C8 : Step F : Step

30 30 EXTERNAL CONTROL DEVICE SETUP Commands may work differently depending upon model and signal. 01. Power (Command: k a) To control Power *On or Off of the set. [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off [a][ ][Set ID][ ][OK/NG][Data][x] 01 : *Power On To Show TV is Power On or *Off [k][a][ ][Set ID][ ][FF][Cr] [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit FF data based on this format, nowledgement feedback presents status about each function. [c][ ][Set ID][ ][OK/NG][Data][x] Using the PC input, you select either 16:9 or 4:3 screen aspect ratio. In DTV/HDMI/Component mode (highdefinition), Just Scan is available. Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially. 03. Screen Mute (Command: k d) To select screen mute on/off. [k][d][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on [d][ ][Set ID][ ][OK/NG][Data][x] 02. Aspect Ratio (Command: k c) (Main Picture Size) To adjust the screen format. (Main picture format) You can also adjust the screen format using the Aspect Ratio in the (Q.Settings) or Picture menu. [k][c][ ][Set ID][ ][Data][Cr] Data 01 : Normal screen (4:3) (Just Scan Off) 02 : Wide screen (16:9) (Just Scan Off) 04 : Zoom 05 : Zoom 2 (Latin America except Colombia Only) 06 : Set by Program/Original (Just Scan Off) 07 : 14:9 (Europe, Colombia, Mid- East, Asia except South Korea and Japan) 09 : * Just Scan 0B : Full Wide (Europe, Colombia, Mid-East, Asia except South Korea and Japan) 10 to 1F : Cinema Zoom 1 to 16 0C : 21:9 (Depending upon model) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. 04. Volume Mute (Command: k e) To control volume mute on/off. You can also adjust mute using the (Mute) button on remote control. [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on) [e][ ][Set ID][ ][OK/NG][Data][x] 05. Volume Control (Command: k f) To adjust volume. You can also adjust volume with the volume buttons on remote control. [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

31 EXTERNAL CONTROL DEVICE SETUP 31 [f][ ][Set ID][ ][OK/NG][Data][x] 06. Contrast (Command: k g) To adjust screen contrast. You can also adjust contrast in the Picture menu. [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 [g][ ][Set ID][ ][OK/NG][Data][x] 07. Brightness (Command: k h) To adjust screen brightness. You can also adjust brightness in the Picture menu. [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 [h][ ][Set ID][ ][OK/NG][Data][x] 08. Color/Colour (Command: k i) To adjust the screen Color(Colour). You can also adjust colour in the Picture menu. [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) To adjust the screen tint. You can also adjust tint in the Picture menu. [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) To adjust the screen sharpness. You can also adjust sharpness in the Picture menu. [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 32 [k][ ][Set ID][ ][OK/NG][Data][x] 11. OSD Select (Command: k l) To select OSD (On Screen Display) on/off when controlling remotely. [k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off 01 : OSD on [l][ ][Set ID][ ][OK/NG][Data][x] 12. Remote Control Lock Mode (Command: k m) To lock the front panel controls on the monitor and remote control. [k][m][ ][Set ID][ ][Data][Cr] Data 00 : Lock off 01 : Lock on [m][ ][Set ID][ ][OK/NG][Data][x] * If you are not using the remote control, use this mode. When main power is off & on (plug-off and plug-in, after seconds), external control lock is released. * In the standby mode (DC off by off timer or ka, mc command), and if key lock is on, TV will not turn on by power on key of IR & Local Key. 13. Treble (Command: k r) To adjust treble. You can also adjust in the Sound menu. [k][r][ ][Set ID][ ][Data][Cr] Data Min: 00 to Max: 64 [r][ ][Set ID][ ][OK/NG][Data][x] (Depending upon model)

32 32 EXTERNAL CONTROL DEVICE SETUP 14. Bass (Command: k s) To adjust Bass. You can also adjust in the Sound menu. [k][s][ ][Set ID][ ][Data][Cr] Data Min: 00 to Max: 64 [s][ ][Set ID][ ][OK/NG][Data][x] (Depending upon model) 17. Equalizer (Command : j v) Adjust EQ of the set. [j][v][ ][Set ID][ ][Data][Cr] MSB Frequency Data LSB 15. Balance (Command: k t) To adjust balance. You can also adjust balance in the Sound menu. [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 [t][ ][Set ID][ ][OK/NG][Data][x] 16. Color (Colour) Temperature (Command: x u) To adjust colour temperature. You can also adjust Color (Colour) Temperature in the Picture menu. [x][u][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 [u][ ][Set ID][ ][OK/NG][Data][x] Frequency Step st Band (decimal) nd Band (decimal) rd Band th Band (decimal) th Band (decimal) [v][ ][Set ID][ ][OK/NG][Data][x] * It depends upon model, and can adjust when sound mode is EQ adjustable value. 18. Energy Saving (Command: j q) To reduce the power consumption of the TV. You can also adjust Energy Saving in Picture menu. [j][q][ ][Set ID][ ][Data][Cr] Data 00: Off 01: Minimum 02: Medium 03: Maximum 04: Auto (For LCD TV / LED TV) 05: Screen off (Depending upon model) [q][ ][Set ID][ ][OK/NG][Data][x]

33 EXTERNAL CONTROL DEVICE SETUP Tune Command (Command: m a) * This command may work differently depending upon model and signal. * For Europe, Mid-East, Colombia, Asia except South Korea and Japan Model Select channel to following physical number. [m][a][ ][Set ID][ ][Data 00][ ][Data 01][ ] [Data 02][Cr] * Digital Antenna/Cable/Satellite [Data 00][Data 01]: Channel Data Data 00 : High Channel data Data 01 : Low Channel data ~ 27 0F (Decimal: 0 ~ 9999) Data 02 : Input Source (Digital) - 10: Antenna TV (DTV) - 20: Antenna Radio (Radio) - 40: Satellite TV (SDTV) - 50: Satellite Radio (S-Radio) - 90: Cable TV (CADTV) - a0: Cable Radio (CA-Radio) * Tune Command Examples: 1. Tune to the Analog antenna (PAL) Channel 10. Set ID = All = 00 Data 00 & 01 = Channel Data is 10 = 00 0a Data 02 = Analog Antenna TV = 00 Result = ma a Tune to the digital antenna (DVB-T) Channel 01. Set ID = All = 00 Data 00 & 01 = Channel Data is 1 = Data 02 = Digital Antenna TV = 10 Result = ma Tune to the satellite (DVB-S) Channel Set ID = All = 00 Data 00 & 01 = Channel Data is 1000 = 03 E8 Data 02 = Digital Satellite TV = 40 Result = ma E8 40 [m][a][ ][0][ ][Data00][ ][Data01][ ][Data02] [ ] [Data03][ ][Data04][ ][Data05][Cr] * Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel from the Major / Minor number, the Physical number is not required when sending a command in Digital. * Analog Antenna/Cable Data 00: Physical Channel Number - Antenna (ATV): 02~45 (Decimal: 2 ~ 69) - Cable (CATV): 01, 0E~7D (Decimal: 1, 14~125) [Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don t care) Data 03 & 04: xx (Don t care) Data 05: Input Source (Analog) * Digital Antenna/Cable Data 00 : xx (Don t care) [Data 01][Data 02]: Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor Channel Number Data 03 : High byte Channel Data Data 04 : Low byte Channel Data [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][x][a][ ][Set ID][ ][NG][Data 00][x] * For South Korea, North/Latin America except Colombia Model * To tune channel to following physical/ major/minor number.

34 34 EXTERNAL CONTROL DEVICE SETUP Data 05 : Input Source (Digital) 02: Antenna TV (DTV) Use Physical Channel Number 06: Cable TV (CADTV) Use Physical Channel Number 22: Antenna TV (DTV) Don t Use Physical Channel Number 26: Cable TV (CADTV) - Don t Use Physical Channel Number 46: Cable TV (CADTV) Use Physical/ Major Channel Number Only (One Part Channel) 66: Cable TV (CADTV) Use Major Channel Number Only (One Part Channel) * Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35. Set ID = All = 00 Data 00 = Channel Data is 35 = 23 Data 01 & 02 = No Major = Data 03 & 04 = No Minor = Data 05 = Analog Cable TV = 01 Total = ma Tune to the digital antenna (ATSC) channel Set ID = All = 00 Data 00 = Don t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = Data 05 = Digital Antenna TV = 22 Total = ma E [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05][x][a][ ] [Set ID][ ][NG][Data 00][x] * For Japan Model To tune channel to following physical/ major/minor number. [m][a][ ][0][ ][Data00][ ][Data01][ ][Data02] [ ] [Data03][ ][Data04][ ][Data05][Cr] 20. Channel (Programme) Add/Del(Skip) (Command: m b) To skip current channel(programme) for next time. [m][b][ ][Set ID][ ][Data][Cr] Data 00: Del(ATSC,ISDB)/Skip(DVB) [b][ ][Set ID][ ][OK/NG][Data][x] 01: Add Set the saved channel status to del(atsc, ISDB)/ skip(dvb) or add. 21. Key (Command: m c) To send IR remote key code. [m][c][ ][Set ID][ ][Data][Cr] Data Key code - page 84 [c][ ][Set ID][ ][OK/NG][Data][x] 22. Control Backlight, Control Panel Light (Command: m g) * For LCD TV / LED TV To control the backlight. [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 [g][ ][Set ID][ ][OK/NG][Data][x]

35 EXTERNAL CONTROL DEVICE SETUP Input select (Command: x b) (Main Picture Input) To select input source for main picture. [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 10 : ATV 01 : CADTV 11 : CATV 02 : Satellite DTV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 20 : AV or AV1 40 : Component1 21 : AV2 41 : Component2 60 : RGB 90 : HDMI1 91 : HDMI2 92 : HDMI3 93 : HDMI4 [b][ ][Set ID][ ][OK/NG][Data][x] * This function depends on model and signal. 24. Auto Configure (Command: j u) To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. [j][u][ ][Set ID][ ][Data][Cr] Data 01: To set [u][ ][Set ID][ ][OK/NG][Data][x]

36