Wireless 150N USB Mini Adapter quick guide

Transcription

1 Wireless 150N USB Mini Adapter quick install guide Model INT QIG

2

3 introduction Thank you for purchasing the INTELLINET NETWORK SOLUTIONS Wireless 150N USB Mini Adapter, Model This quick install guide presents the basic steps required for setting up and operating this device. For more detailed instructions and specifications (including FCC and CE warnings and statements), refer to the user manual 1) on the CD enclosed with this product; 2) on the Web site listed below; or 3) in some cases, printed and enclosed with this product. Contact your INTELLINET NETWORK SOLUTIONS dealer with comments or questions, or visit for information on the latest software and firmware updates, related products and additional contact information. System Requirements Notebook or desktop PC with Pentium 1 GHz-compatible processor or higher Windows XP/Vista and Windows 7 Available Hi-Speed USB 2.0 port Package Contents Wireless 150N USB Mini Adapter Quick installation guide Setup CD with user manual NOTE: Some screen images have been modified to fit the format of this guide. Screen images on all compatible operating systems are similar. 3

4 installation 1. With your computer powered on, plug the Wireless 150N USB Mini Adapter into an available USB 2.0 port. NOTE: Never use force to insert the adapter. If it doesn t slide into the port easily, it may simply be upside down. 2. The first of the InstallShield Wizard screens the Welcome to the Found New Hardware Wizard screen will display automatically. Click Cancel to continue with the software installation. 4

5 3. Insert the included driver CD into the CD/DVD-ROM drive of your computer and run the Setup.exe program. When the Choose Setup Language screen displays, highlight your selection and click Next. 4. When the first of the Install Driver and Utility screens displays, click Next. As with any InstallShield Wizard process, you can click Back to change settings or selections on previous screens; Cancel to exit the wizard and start over. 5. When the subsequent Install screen displays, click Install to continue. 6. When the Setup Status screen displays, you ll see a status bar indicating the progress of the installation procedure. Allow the process to be completed. 7. When the InstallShield Wizard Complete screen displays, click Finish. At this point, you can proceed to the configuration of the adapter. 5

6 configuration 1. Once the installation has been completed, the configuration utility will automatically display on your computer desktop. Also, the utility icon will appear in the lower-right corner in your systems tray, allowing you to open the utility by right-clicking the icon. 2. The configuration utility will automatically scan for wireless access points and access to any unencrypted wireless access point. To connect to another access point, select the access point and double-click it. If the particular wireless access point you want to connect to doesn t show on this screen, click Refresh and the adapter will re-scan for devices. INTELLINET Wireless 6

7 3. If the wireless access point uses encryption, you need to input either a WEP key or a WPA preshared key. Obtain it from the owner of the wireless access point you want to connect to, enter the correct key in the Network key fields highlighted below, then click OK. NOTE: If the value you enter isn t an exact match to the correct key, you won t be able to connect to that wireless AP. 4. If the wireless AP is successfully connected, you ll see an icon representing an antenna receiving a signal in front of the name of wireless device. 7

8 INTELLINET NETWORK SOLUTIONS offers a complete line of active and passive networking products. Ask your local computer dealer for more information or visit Copyright INTELLINET NETWORK SOLUTIONS All products mentioned are trademarks or registered trademarks of their respective owners.