If you want to do other configurations please refer to below programming barcodes.

Transcription

1 NT-1202 Quick Setup Guide This is 1D&2D plug and play model if you use a US keyboard. If you use other type of keyboard, plug the USB cable on your device, setup keyboard language before you use it. (refer to below Keyboard Language Type) after that the scanner can start to work. If you want to do other configurations please refer to below programming barcodes. Barcode Programming Netum barcode scanners are factory programmed for common terminal and communications settings. If you need to change these settings, programming is accomplished by scanning the bar codes in this guide. An asterisk (*) next to an option indicates the default setting. Communication Mode USB -KBW When you connect the scanner to the Host via a USB connection, you can enable the USB-KBW feature by scanning the barcode below. It works on a Plug and Play basis and no driver is required. USB KBW* USB Serial Port If you connect scanner to the Host via a USB connection, the USB COM Port Emulation feature allows the Host to receive data in the way as a serial port does. USB Serial Port

2 Driver is required if you want to work under USB Serial Port. Please download it from below link For Win 7,install 64X, for other system please install X86. As for system above Win 10 no need to install any software. Keyboard Language In order to let scanner upload the codes in a correct way, you have to set the keyboard language. For example If you use French Keyboard, scan below barcode of French keyboard then scanner will upload barcodes according to France keyboard layout. American Keyboard is set by default, if you use a US keyboard you can skip this step. America Keyboard* Portugal Keyboard Franc Keyboard Spain Keyboard Germany Keyboard Turkey Q Keyboard Italy Keyboard Newly Added

3 Hungary Keyboard Czech Keyboard Scanning Mode Key Holding Press the button to trigger the reading, release the button to end the reading. Reading success or reading time over a single reading time will end the reading Level * Continuous Mode Under continuous mode scanner performs continuous work. Reading success or reading time over a single reading time will end the reading. More than the specified time will automatically trigger the next reading. Continuous Mode Auto Sense Mode Under auto sense mode, scanner detects the brightness of the surroundings. Trigger reading when the brightness changes. Reading success or reading time over a single reading time will end the reading. Regardless of the last success or failure to read, re-enter the detection of the surrounding environment brightness. Auto Sense Mode Terminator configuration The scanner provides a shortcut for setting the terminating character suffix to CR or CRLF and enabling it by scanning the appropriate barcode below.

4 Disable CR & LF* CR Beeper Volume To select a decode beep volume, scan the appropriate bar code. TAB Low Medium *High Mute To enable or disable close all prompt, scan the appropriate bar code below. Disable * Enable

5 Default Configuration If you want to cancel all the configuration that you have done to the scanner. Scan below barcodes to the restore factory. Transmit Code ID Character A code ID character identifies the code type of a scanned bar code. This can be useful when decoding more than one code type. The code ID character is inserted between the prefix character (if selected) and the decoded symbol. Symbol Code ID Aim Code ID None* Symbol Code ID refer to Symbol Code Identifiers. Aim Code ID refer to AIM Code Identifiers.

6 Common Function Enable/Disable UPC-A To enable or disable UPC-A, scan the appropriate bar code below. *Enable UPC-A Disable UPC-A Enable/Disable UPC-E To enable or disable UPC-E, scan the appropriate bar code below. *Enable UPC-E Disable UPC-E Enable/Disable EAN-8 To enable or disable EAN-8, scan the appropriate bar code below. *Enable EAN-8 Disable EAN-8 Enable/Disable EAN-13 To enable or disable EAN-13, scan the appropriate bar code below. *Enable EAN-13 Disable EAN-13

7 Enable/Disable Bookland EAN(ISBN) To enable or disable EAN Bookland, scan the appropriate bar code below. Enable Bookland EAN *Disable Bookland EAN Decode UPC/EAN Supplementals Supplementals are bar codes appended according to specific format conventions (e.g.upc A+2, UPC E+2, EAN 13+2, EAN 13+5). The following options are available: *Ignore UPC/EAN with Supplementals Do not read supplementals Scanner can only read the barcode no matter the barcode with supplementals or not. Only read the barcode with supplementals- The scan engine can only read the barcode with supplementals. Auto read supplementals- The scan engine can not only read the barcode with supplementals, but also read the barcode without supplementals.

8 Transmit UPC-A Check Digit Scan the appropriate bar code below to transmit the symbol with or without the UPC-A check digit. *Transmit UPC-A Check Digit Do Not Transmit UPC-A Check Digit Transmit UPC-E Check Digit Scan the appropriate bar code below to transmit the symbol with or without the UPC-E check digit. *Transmit UPC-E Check Digit Do Not Transmit UPC-E Check Digit Convert UPC-E to UPC-A Enable this parameter to convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections Convert UPC-E to UPC-A Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E (zero suppressed) decoded data. *Do Not Convert UPC-E to UPC-A

9 Code 128 Enable/Disable Code 128 To enable or disable Code 128, scan the appropriate bar code below. Code 39 *Enable Code 128 Disable Code 128 Enable/Disable Code 39 To enable or disable Code 39, scan the appropriate bar code below. *Enable Code 39 Disable Code 39. Transmit Code 39 Check Digit Scan this symbol to transmit the check digit with the data. Transmit Code 39 Check Digit (Enable) Scan this symbol to transmit data without the check digit. *Do Not Transmit Code 39 Check Digit (Disable)

10 Enable/Disable Code 39 Full ASCII Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable or disable Code 39 Full ASCII, scan the appropriate bar code below. See Table 4-3 for the mapping of Code 39 characters to ASCII values. Enable Code 39 Full ASCIl *Disable Code 39 Full ASCII NOTE Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. If you get an error beep when enabling Code 39 Full ASCII, disable Trioptic Code 39 and try again. Code 93 Enable/Disable Code 93 To enable or disable Code 93, scan the appropriate bar code below. Enable Code 93 *Disable Code 93 Code 11 Enable/Disable Code 11 To enable or disable Code 11, scan the appropriate bar code below. Enable Code 11 *Disable Code 11 Transmit Code 11 Check Digits This feature selects whether or not to transmit the Code 11 check digit(s). Transmit Code 11 Check Digit(s) (Enable) *Do Not Transmit Code 11 Check Digit(s) (Disable)

11 Interleaved 2 of 5 Enable/Disable Interleaved 2 of 5 To enable or disable Interleaved 2 of 5, scan the appropriate bar code below. *Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 Transmit I 2 of 5 Check Digit Scan this symbol to transmit the check digit with the data. Transmit I 2 of 5 Check Digit (Enable) Scan this symbol to transmit data without the check digit. *Do Not Transmit I 2 of 5 Check Digit (Disable) Convert I 2 of 5 to EAN-13 This parameter converts a 14 character I 2 of 5 code into EAN-13, and transmits to the host as EAN-13. To accomplish this, I 2 of 5 must be enabled, one length must be set to 14, and the code must have a leading zero and a valid EAN-13 check digit. Convert I 2 of 5 to EAN-13 *Do Not Convert I 2 of 5 to EAN-13 Discrete 2 of 5/Industrial 2 of 5 To enable or disable Discrete 2 of 5, scan the appropriate bar code below. Enable Discrete 2 of 5 *Disable Discrete 2 of 5

12 Matrix 25 Enable/Disable Matrix 25 To enable or disable Matrix 25, scan the appropriate bar code below. Enable Matrix 25 *Disable Matrix 25 Transmit Matrix 25 Check Character Enable Matrix 25 Transmit Check Character Disable Matrix 25 Transmit Check Character * Codabar Enable/Disable Codabar To enable or disable Codabar, scan the appropriate bar code below. Enable Codabar *Disable Codabar MSI/MSI PLESSEY Enable/Disable MSI To enable or disable MSI, scan the appropriate bar code below. Enable MSI *Disable MSI Transmit MSI Check Digit Scan this symbol to transmit the check digit with the data.

13 Scan this symbol to transmit data without the check digit. Transmit MSI Check Digit (Enable) *Do Not Transmit MSI Check Digit (Disable) GS1 DataBar/RSS Enable/Disable GS1 DataBar-14 To enable or disable GS1 DataBar-14, scan the appropriate bar code below. Enable GS1 DataBar-14 *Disable GS1 DataBar-14 Enable/Disable GS1 DataBar Limited To enable or disable GS1 DataBar Limited, scan the appropriate bar code below. Enable GS1 DataBar Limited *Disable GS1 DataBar Limited Enable/Disable GS1 DataBar Expanded To enable or disable GS1 DataBar Expanded, scan the appropriate bar code below. Enable GS1 DataBar Expanded *Disable GS1 DataBar Expanded

14 PDF417 Enable/Disable PDF417 To enable or disable PDF417, scan the appropriate bar code below. Disable PDF417 *Enable PDF417 QR Enable/Disable QR To enable or disable QR, scan the appropriate bar code below. Disable QR Code *Enable QR Code Data Matrix(DM) Enable/Disable Data Matrix(DM) To enable or disable Data Matrix(DM), scan the appropriate bar code below. Disable DataMatrix *Enable DataMatrix Maxi Code Enable/Disable Maxi Code To enable or disable Maxi Code, scan the appropriate bar code below. *Disable MaxiCode Enable MaxiCode Prefix/Suffix Values A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To set these values, scan a four-digit number (i.e. four bar codes) that corresponds to ASCII values. See the Table 4-3 and Numeric Bar Codes in appendix. To change the selection or cancel an incorrect entry, scan Cancel in appendix. To set the Prefix/Suffix values via serial commands, see Setting Prefixes

15 and Suffixes Via Serial Commands. NOTE In order to use Prefix/Suffix values, the Scan Data Transmission Format must be set. Scan Prefix Scan Suffix 1 Scan Suffix 2 Scan Data Transmission Format To change the Scan Data Transmission Format, scan one of the eight bar codes corresponding to the desired format. *Data As Is <DATA><SUFFIX 1> <DATA><SUFFIX2> <DATA> <SUFFIX 1><SUFFIX 2> <PREFIX> <DATA > <PREFIX> <DATA> <SUFFIX 1>

16 <PREFIX> <DATA> <SUFFIX 2> <PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2> Enable /Disable Functional Key Set Disable Functional Key Set* Enable Functional Key Set For example if you scan value 1004, Keystroke will be Up Down. But if you scan Enable Functional Key Set after you scan the value 1004, you will get functional key set Ctrl +D. For more details please refer to Appendix Appendix 1 Numeric Bar Codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s). Numeric Bar Codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s). 0

17

18 Example on how to set prefix and suffix Prefix Setting Step 1: scan prefix Scan Prefix

19 Step 2: To set these values, scan a four-digit number (i.e. four bar codes) that corresponds to ASCII values. See the Table 4-3 and Numeric Bar Codes in appendix. Step 3: i.e if you want to add +, scan 1043 (one by one) Step 4: Set Data Transmission Format <PREFIX> <DATA > Suffix Setting Step 1: scan suffix Scan Suffix 1 Step 2 and Step 3 same procedures like setting prefix Step 4: Set Data Transmission Format <DATA><SUFFIX 1>

20 Setting Prefixes and Suffixes Via Serial Commands To append a prefix and suffixes to the decode data: 1 Set the Scan Data Transmission Format (parameter 0xE2) to the desired option. 2 Enter the required value(s) for Prefix (0x69), Suffix1 (0x68) or Suffix2 (0x6A) using the hex values for the desired ASCII value from Table 4-3 Table 4-3 Character Equivalents (Continued) Scan Value Hex Value Full ASCLL Code 39 Encode Char Keystroke h %U CTRL h $A CTRL A h $B CTRL B h $C CTRL C h $D CTRL D h $E CTRL E h $F CTRL F h $G CTRL G h $H CTRL H h $I CTRL I Ah $J CTRL J Bh $K CTRL K Ch $L CTRL L Dh $M CTRL M Eh $N CTRL N Fh $O CTRL O h $P CTRL P h $Q CTRL Q h $R CTRL R h $S CTRL S h $T CTRL T h $U CTRL U h $V CTRL V h $W CTRL W h $X CTRL X

21 Table 4-3 Character Equivalents (Continued) Scan Value Hex Value Full ASCLL Code Scan Value Full ASCLL Code Keystroke 39 Encode Char Keystroke 39 Encode Char h $Y CTRL Y Ah $Z CTRL Z Bh %A CTRL [ Ch %B CTRL \ Dh %C CTRL ] Eh %D CTRL Fh %E CTRL h Space Space h /A! h /B h /C # h /D $ h /E % h /F & h /G h /H ( h /I ) Ah /J * Bh /K Ch /L, Dh Eh Fh / / h h h h h h h h 7 7

22 Table 4-3 Character Equivalents (Continued) Scan Value Hex Value Full ASCLL Code 39 Encode Char Keystroke h h Ah /Z : Bh %F ; Ch %G < Dh %H Eh %I > Fh %J? h h A A h B B h C C h D D h E E h F F h G G h H H h I I Ah J J Bh K K Ch L L Dh M M Eh N N Fh O O h P P h Q Q h R R h S S h T T h U U h V V

23 Table 4-3 Character Equivalents (Continued) Scan Value Hex Value Full ASCLL Code 39 Encode Char Keystroke h W W h X X h Y Y Ah Z Z Bh %K [ Ch %I \ Dh %M ] Eh %N ^ Fh %O _ h %W h +A a h +B b h +C c h +D d h +E e h +F f h +G g h +H h h +I i Ah +J j Bh +K k Ch +L l Dh +M m Eh +N n Fh +O o h +P p h +Q q h +R r h +S s h +T t h +U u

24 Table 4-3 Character Equivalents (Continued) Scan Value Hex Value Full ASCLL Code 39 Encode Char Keystroke h +V v h +W w h +X x h +Y y Ah +Z z Bh %P { Ch %Q Dh %R } Eh %S ~ Fh Undefined Symbol Code Identifiers.

25 AIM Code Identifiers

26 Appendix 2