Basic WorkflowChapter1:
|
|
- Barrie McDaniel
- 5 years ago
- Views:
Transcription
1 Chapter 1 Basic WorkflowChapter1: This chapter describes the AutoCAD Electrical version of AutoCAD software. AutoCAD Electrical is created for electrical engineers who design industrial control systems. Along with the familiar AutoCAD working environment, an intuitive menu system is included that gives you access to many industry-specific tools that automate the electrical control system s design process. AutoCAD Electrical is an effective design tool for you to use to create schematics, diagrams, layouts, and related reports faster and more accurately than using AutoCAD software. Objectives After completing this chapter, you will be able to: Describe and list some of the AutoCAD Electrical specific enhancements integrated into the standard AutoCAD environment. Describe and execute the basics steps required to create or edit an AutoCAD Electrical circuit. 1
2 Lesson: Design Environment Overview This lesson is an overview of the AutoCAD Electrical environment, describing those features that are common to both AutoCAD and AutoCAD Electrical, and those features that are different. Comparing AutoCAD Electrical to AutoCAD helps you to learn how AutoCAD Electrical functions work and how to use them correctly. AutoCAD Electrical environment Objectives After completing this lesson, you will be able to: Describe and compare the AutoCAD Electrical application with AutoCAD software, including symbol libraries and search paths. Describe AutoCAD Electrical-specific menu interface options. Describe several of the available AutoCAD Electrical Help options. 2 Chapter 1: Basic Workflow
3 Environment Comparisons The AutoCAD Electrical environment differs only slightly from the familiar AutoCAD interface. Along with Electrical-specific commands, other enhancements include Electrical symbol libraries and more powerful search path options. Knowing these differences can help you to learn the AutoCAD Electrical interface more quickly. About AutoCAD Compatibility AutoCAD Electrical is not just compatible with AutoCAD. It is AutoCAD. AutoCAD Electrical is completely integrated with AutoCAD software, and it shares the same commands and functionality. Automated and enhanced commands have been added to AutoCAD Electrical to help you create schematic drawings. Electrical intelligence is stored in the drawings, mainly in the form of attributed blocks. Because the electrical information is stored in the drawing and not in a proprietary database, you can manipulate the drawings with any program that you can use to edit standard DWG files without corrupting the drawing and electrical intelligence. Lesson: Design Environment 3
4 Familiar AutoCAD Environment The AutoCAD Electrical menu system has many industry-specific tools that automate the electrical control systems design process. With the familiar AutoCAD working environment, you can use AutoCAD commands in AutoCAD Electrical for normal operations. Many AutoCAD Electrical functions are powerful AutoCAD macros, and other product functions use AutoCAD programming languages to create electrical industry-specific commands. AutoCAD Electrical produces generic AutoCAD objects in generic AutoCAD drawings. Everything automatically created by AutoCAD Electrical can be completed with a sequence of AutoCAD manual operations. Consequently, AutoCAD Electrical drawings can be edited with AutoCAD, or AutoCAD LT, without corrupting or damaging AutoCAD Electrical functionality. Symbols and Footprints All AutoCAD Electrical schematic blocks, or symbols, are standard AutoCAD blocks using a combination of attributes and xdata to enhance the block s intelligence. Symbols typically rely more on attributes, while panel layout blocks, or footprints, rely more on xdata. Symbol as inserted Exploded symbol You can create symbols with generic AutoCAD block creation tools or with the AutoCAD Electrical Symbol Builder wizard. The Symbol Builder wizard automates many manual tasks, including the creation, sizing, and placing of symbol attributes. To differentiate between the two types of blocks, schematic blocks are usually referred to as symbols and panel layout blocks are usually referred to as footprints. Both symbols and footprints are referred to as components. 4 Chapter 1: Basic Workflow
5 Symbol Libraries Several electrical symbol libraries are included with AutoCAD Electrical. These libraries include: Two sizes of JIC symbols, JIC1 and JIC125 (Joint Industrial Council United States) Two sizes of IEC symbols, IEC2, and IEC4 (International Electromechanical Commission Europe) One size of GB symbols (Gua Biao Chinese) One size of JIS symbols (Japanese Industrial Standard) One size of AS symbols (Australian Standard) Directory listing of available libraries Also included are several libraries of symbols for design processes other than electrical schematics. These libraries include the following symbols. Type Hydraulic Pneumatic P & ID Symbols included Filters, valves, cylinders, pressure switches, motors, pumps, meters, restrictors, quick disconnects, flow arrows, and other miscellaneous components that all adhere to the NFPA/T3.10.4R and AS standards. Operators, valves, flow paths, filters, regulators, cylinders, meters, motors, quick disconnects, mufflers, manifolds, flow arrows, and other miscellaneous components. Equipment, tanks, nozzles, pumps fittings, valves, actuators, logic functions, instrumentation, flow, flow arrows that all adhere to the ANSI/ISA S5.1 instrumentation standard. About the Scratch Database AutoCAD Electrical automatically maintains a scratch database, which reflects a project drawing s intelligence and is updated as the drawings are changed. The database carries a snapshot of the block and attribute information carried in the project s drawing files so that projectwide functions can be processed more efficiently. There is no need for you to manage the database; the drawing is the data storage area. If the scratch database is lost or corrupted, it is re-created automatically from the data stored in the project drawings. Lesson: Design Environment 5
6 User Interface In addition to the AutoCAD menus and tools, AutoCAD Electrical adds several industry-specific tools that are specifically for electrical engineers, designers, and drafters. These additional tools are used, and can be customized, in the same manner as the standard AutoCAD menus. Just as with AutoCAD, seldom is one AutoCAD Electrical method the best for every situation. By familiarizing yourself with the location and uses of the tools found on the AutoCAD Electrical interface, you can develop the most effective methods to accomplish the tasks associated with your job. Main User Interface Elements Some of the main interface tools are shown. Project Manager Projects, Components, Wires, and Panel Layout menus Toolbars Tool palette 6 Chapter 1: Basic Workflow
7 Toolbars When you install AutoCAD Electrical using the default settings, three additional toolbars are displayed in addition to the standard AutoCAD configuration of toolbars: ACE: Main Electrical, ACE: Main Electrical 2, and ACE: Panel Layout. You use the ACE: Main Electrical and ACE: Main Electrical 2 toolbars primarily in the creation of the wiring diagram or schematic drawings. These toolbars contain the wiring and schematic symbol insertion commands. You use the ACE: Panel Layout toolbar to create panel layout drawings. This toolbar contains commands to insert footprints, din rails, and balloons. You can display the AutoCAD Electrical toolbars by clicking Projects > Toolbars. You can also display toolbars with other functions from this menu, including the Quick Pick, Conversion Tools, and Extra Libraries toolbars. Electrical Menus The Panel Layout toolbar contains commands that are similar in function to the schematic toolbars. However, each toolbar contains commands that are operation-specific. For example, the Panel Reports command ignores schematic information and provides report options only for the panel layout drawings and components. The Panel Layout buttons are tinted green to help distinguish them from their blue-tinted schematic counterparts. In addition to the standard AutoCAD menus, AutoCAD Electrical has additional menus with industryspecific tools. With the exception of a few commands entered on the command line, all available AutoCAD Electrical commands are available on the Projects, Wires, Components, and Panel Layout menus. Lesson: Design Environment 7
8 Icon Menus AutoCAD Electrical uses an icon menu system for the Symbol Insertion tool. The Schematic icon menu and the Panel icon menu look very similar, but as with the toolbars, they have different functionality, inserting schematic drawing symbols and panel layout footprints, respectively. IEC version of the Schematic icon menu Panel icon menu 8 Chapter 1: Basic Workflow
9 Context Menus Like the context menus in AutoCAD, AutoCAD Electrical context menus are available when you rightclick over an AutoCAD Electrical object, such as a symbol or a wire. Containing commonly used commands associated with the selected object, a context menu is displayed at the location of the cursor. Context menu for symbols Context menu for wires Tool Palettes Some of the tool palettes included with the AutoCAD Electrical profile include Wires, Panel, Schematic, and Conversion. The AutoCAD Electrical tool palettes replace standard AutoCAD tool palettes. You can display the AutoCAD Electrical tool palettes by clicking the standard AutoCAD Tool Palette button on the AutoCAD Standard toolbar. Section of Schematic palette Lesson: Design Environment 9
10 Project Manager Palette The Project Manager is a special type of tool palette for interfacing with the project file. The Project Manager palette shares much of the same display functionality of standard tool palettes including docking and auto-hide. You can use the drop-down menu for creating new projects or selecting existing ones. Double-click the project name in the Projects list to display a list of the drawings associated with the project. You can reorder the drawings, set library paths, and edit other project settings by rightclicking the project name to display a context menu. Right-click a drawing name to open a context menu that you can use to open, copy, and rename drawing files, or access other editing tools to modify the drawing file. Control buttons at the top of the palette enable you to access projectwide commands such as Resequencing and Plotting. You can also change the Drawing List Display Configuration. You can expand the bottom of the Project Manager palette and use a toggle command to display either the Details or Preview window. The Details window displays information about the project, such as the file name and project database location. The Preview window displays a preview of a selected drawing file. IECDemo project drawing list in the Project Manager The Projects list window does not have drag-and-drop functionality. To edit the project file, you must use the shortcut menu or control buttons. 10 Chapter 1: Basic Workflow
11 Help System The Help system for AutoCAD Electrical is separate from the AutoCAD Help system and deals strictly with AutoCAD Electrical topics. There are several tools to find answers to your questions within the Help system, including the Launchpad, online Help, InfoCenter, and the AutoCAD Electrical newsgroup. AutoCAD Electrical Help system AutoCAD Electrical Help Access Click Help menu > Electrical Help Topics to access AutoCAD Electrical Help. Lesson: Design Environment 11
12 When you press F1 and a tooltip is not displayed, you access AutoCAD Help not AutoCAD Electrical Help. When you press F1 and a tooltip is displayed, you access the Help topic for that specific tool. Displaying the Launchpad Click Help menu > Learning Tools > Launchpad to display the Launchpad. Launchpad The Launchpad appears the first time that you start AutoCAD Electrical. Do not close the dialog box and do not turn off the Display on Start-up check box until you have explored all the features that are available. 12 Chapter 1: Basic Workflow
13 The following Launchpad links can help you to use AutoCAD Electrical. Launchpad links Getting Started Manual Description A PDF file that gives you basic information on how AutoCAD Electrical works to get you started. Each brief topic has simple instructions. This manual is not meant to replace classroom training (it does not cover all of the necessary topics, such as custom symbol creation). Topics include how to insert and edit ladders, wires, schematic components, PLCs, and wire numbers, as well as how to add drawings to a project, add drawing descriptions, and create panel layouts from schematic drawings. AutoCAD Electrical Discussion Group Advanced Productivity Whether you are a beginner or an advanced user, you can get answers to your questions from other AutoCAD Electrical users here. This site is updated daily by some of the most knowledgeable AutoCAD Electrical users. Knowledgeable Autodesk personnel, who can provide solutions to your questions, also monitor it. Click Help menu > Learning Tools > Launchpad. Click AutoCAD Electrical Discussion Group. A special Help section covering several of the most requested advance topics about implementing and using AutoCAD Electrical. In addition to the standard Help file content, these in-depth topics are more instructional and explain workflows. In the Launchpad, click Advanced Productivity. Lesson: Design Environment 13
14 Electrical Help Tools The Help system has several functions to assist you: Function Printable Help Description You can print topics or the entire contents of Help directly from the Help menu. Click the Contents tab, and right-click the topic or section you want to print. Click Print. To print a single topic that is listed on the Index tab, click the topic. Click Print. Favorites To refer to a selected topic in the future, add the topic to the Favorites list. Select the topic. Click the Favorites tab. Click Add. 14 Chapter 1: Basic Workflow
15 Function Search Description Use the Search function for topics you cannot find. Enter the words you want to search for. Press ENTER. All topics that contain your search words are displayed. InfoCenter The InfoCenter tool is located on the menu bar. It provides access to the Communication Center panel for product updates and announcements as well as to the Favorites panel for saved Help topics. It also provides a simple method for searching for information in the Help system. You can search the AutoCAD and AutoCAD Electrical Help systems with the InfoCenter tool. For more information, see AutoCAD Help. On the Index tab, enter InfoCenter. Lesson: Design Environment 15
16 Lesson: Basic Workflow Overview Understanding the basics of the design process can help you when you adapt AutoCAD Electrical to your design methods and standards. This lesson describes the basic workflow of AutoCAD Electrical design. Although some methods are used more often than others, many methods are available. For example, you may start with a panel layout to determine and order components that require a long lead time. Then you can extract a component list from the panel layout to design the schematic. Or maybe you design your schematics in a point-to-point style, laying out components in empty areas of the drawing and then connecting the components with wires. AutoCAD Electrical automatically connects these components as wires are drawn across them. Schematic drawing, icon menu, and Bill of Material report Objective After completing this lesson, you will be able to: Describe and perform many of the basic steps necessary to complete an electrical design. 16 Chapter 1: Basic Workflow
17 Basic Circuit Workflow One of the more frequently used styles for electrical design is drawing a ladder and rungs, and then inserting components from the icon menu system. Basic commands are described for a general overview of AutoCAD Electrical functionality. Typical reset circuit including rungs, components, and wire numbers Lesson: Basic Workflow 17
18 Process: Basic Circuit Workflow The following is an overview of the schematic ladder-style design process. 1. Set the drawing properties options to match your company or project standards for component tag referencing, symbol libraries, ladder numbering, and other design parameters. 2. Add ladders, rungs, or wires to your schematic drawing. 3. Select the components to be added by browsing through the icon menu system. 18 Chapter 1: Basic Workflow
19 4. Select the insertion location point of the symbol. The symbol is inserted, and automatically trims and connects to the underlying wire. 5. In the Insert/Edit Component dialog box, enter the component information, including partnumber lookups from a database, description and location code assignments, and pin-number checking and assignments. 6. Add wire numbers and cross-referencing. Lesson: Basic Workflow 19
20 7. At any point during the design process, you can generate Bill of Material, Wiring, and other reports. 20 Chapter 1: Basic Workflow
21 Exercise: Explore the Basic Circuit Workflow In this exercise, you create a simple electrical control circuit. You complete the following steps: Insert ladder rungs and a push button. Insert push-button components and add partcatalog information. Add a second push button and a relay coil. Add a light and wire numbers and generate a Bill of Material report. Insert Ladder Rungs and a Push Button 1. If the Project Manager is not displayed, on the Schematic palette, click Project Manager. The completed exercise Completing the Exercise To complete the exercise, follow the steps in this book or in the onscreen exercise. In the onscreen list of chapters and exercises, click Chapter 1: Basic Workflow. Click Exercise: Explore the Basic Circuit Workflow. 2. In the Project Manager, from the Projects list, click Open Project. 3. Browse to where you installed the exercise files and select Basic_Workflow_IEC.wdp. Click Open. 4. On the Project Manager, double-click Basic_Workflow_IEC to expand the drawing list. 5. Right-click Basic_Workflow_IEC_06.dwg. Click Open. 6. Zoom in to the left side of the drawing. Make sure both the positive and 0 volt wires are displayed. 7. On the Wires palette, click Add Rung to add two rungs to the ladder at location references 1 and 2. Lesson: Basic Workflow 21
22 8. Select the insertion points for two rungs at location references 1 and 2. (These will be at the x values of 70 and 110, respectively.) NOTE: Be sure to click anywhere between the horizontal buses, rather than on the bus. 9. Notice that the rung automatically snaps to the nearest rung reference (if available) and adds connection symbols as necessary. 13. Select the insertion point on the left rung, near the upper end. 10. On the Schematic palette, click Insert Component to insert the first component, which is a push button to reset the circuit. 11. In the Insert Component: IEC: Schematic Symbols dialog box, click Push Buttons. 14. Now you annotate the component, adding description and catalog information. You can manually enter the desired information, but AutoCAD Electrical provides many tools for entering the information from various reference files. In the Insert/Edit Component dialog box, notice that AutoCAD Electrical automatically assigns the tag name -06S1. Under Description, click Defaults. 12. In the IEC: Push Buttons dialog box, click Push Button NO Momentary. 15. In the Descriptions dialog box, click System Reset. Click OK. 22 Chapter 1: Basic Workflow
23 16. Under Catalog Data, click Project. 17. In the Find: Catalog Assignments dialog box, click Active Project. Click OK. 18. In the Qsave dialog box, click OK to save the current drawing, ensuring that the drawing file data is up to date. 19. AutoCAD Electrical searches all of the drawings in the current project and lists any push buttons found in the HPB11/VPB11 Catalog Values (This Project) dialog box. 20. Notice that AutoCAD Electrical transfers the catalog data, including the subassembly information, into the Insert/Edit Component dialog box. Select AB, 800EP-F2. Click OK. 21. Click OK. This completes the insertion of the push button. This same basic process is repeated for most component insertions. Add a Second Push Button and a Relay Coil 1. On the Schematic palette, click Insert Component to add an emergency stop push button. 2. In the Insert Component: IEC: Schematic Symbols dialog box, click Push Buttons. Lesson: Basic Workflow 23
24 3. In the IEC: Push Buttons dialog box, click Mushroom Head NC Momentary. Select the part number 800T-D6A. Click OK. 4. Select the insertion point near the middle of the left rung. 5. In the Insert/Edit Component dialog box, notice that AutoCAD Electrical has automatically entered the tag name as -06S2. Because this is the second push button inserted, AutoCAD Electrical increments the last push button number automatically. This drawing had the Automatic Numbering option set to Sequential. If the numbering was based on the component location, the second push button on the same rung would have a suffix such as A appended to it. 6. In the Insert/Edit Component dialog box, under Descriptions, click Defaults. 7. In the Descriptions dialog box, select Emergency Stop. Click OK. 8. In the Insert/Edit Component dialog box, under Catalog Data, click Lookup. 10. Notice that the information is transferred into the Insert/Edit Component dialog box. 11. Click OK. This completes the push button insertion. 9. In the Parts Catalog (Table: PB) dialog box, you can browse the parts catalog database to find the desired part number. You filter the available options using the edit boxes at the top of the dialog box. 24 Chapter 1: Basic Workflow
25 12. On the Schematic palette, click Insert Component to insert a relay coil. 13. In the Insert Component: IEC: Schematic Symbols dialog box, click Relays/Contacts. 14. In the IEC: Relays and Contacts dialog box, click Relay Coil. 15. Select the insertion point for the relay coil on the left rung, near the bottom, directly to the left of -06K In the Insert/Edit Component dialog box, click OK. 21. You can easily edit component insertions with built-in utilities. To move the Description attribute to the outside of the ladder in the same way as the other relay coils on the drawing, do the following: Right-click -06K1. Click Attributes > Move Attribute. Enter W. Press ENTER. Select the Master Control and Relay attributes. Press ENTER. Select the Base point. Select the desired To point. Press ENTER. NOTE: Changing the justification requires you to use the AutoCAD Properties command. Notice that AutoCAD Electrical has automatically assigned the component tag name as -06K In the Insert/Edit Component dialog box, under Description, click Defaults. 17. In the Descriptions dialog box, select Master Control Relay. Click OK. 18. In the Insert/Edit Component dialog box, under Catalog Data, click Lookup. 19. In the Parts Catalog (Table: CR) dialog box, select the part number 700-P200A1. Click OK. Add Wire Branches and Relay Coil Child Contacts 1. On the Wires palette, click Insert Wire to add two wires that create connecting branches for the circuit. Lesson: Basic Workflow 25
26 2. For the wire start point, select a point on the left rung between -06K1 and -06S2. 3. Select the wire endpoint on the right rung, directly to the right of the wire start point. 5. Select the wire endpoint on the right rung, directly to the right of the wire start point. Press ENTER. Notice that AutoCAD Electrical adds angled wire connections automatically. 4. For the second wire branch, select the wire start point on the left rung between -06S1 and -06S2. 6. On the Wires palette, click Trim Wire to trim the wire on the right rung between the two wire branches you added. 26 Chapter 1: Basic Workflow
27 7. Select a point on the right rung between the two wire branches you added. 10. In the IEC: Relays and Contacts dialog box, click Relay NO Contact. Notice that AutoCAD Electrical removed the selected wire. If the angled connections are no longer needed, AutoCAD Electrical also removes them. 8. On the Schematic palette, click Insert Component to add a contact from -06K1. This contact will latch the circuit when -06K1 is activated. 11. Select the insertion point on the right rung, directly to the right of -06S1. This is a child contact of the parent coil. 12. In the Insert/Edit Child Component dialog box, under Component Tag, click Parent/ Sibling to select the parent coil and transfer data from the parent to the child. 13. In the drawing, select anywhere on -06K In the Insert/Edit Child Component dialog box, click OK to transfer data such as the tag, description, and pin numbers to the child component. 9. In the Insert Component: IEC: Schematic Components dialog box, click Relays/ Contacts. Add a Light and Wire Numbers and Generate a BOM Report 1. On the Schematic palette, click Insert Component to insert a red light to signal when the circuit is engaged. Lesson: Basic Workflow 27
28 2. In the Insert Component: IEC: Schematic Symbols dialog box, click Pilot Lights. 11. On the Wires palette, click Automatic Wire Numbers to add wire numbers. 3. In the IEC: Pilot Lights dialog box, click Standard Lights. 4. In the IEC: Standard Lights dialog box, click Red Light. 5. Select the insertion point on right rung, directly right of -06K In the Wire Tagging dialog box, click Drawing-Wide. The drawing is searched for wire networks. A wire number is placed on each network found. 13. The last step is to extract a Bill of Material report from the components in the drawing. On the Schematic palette, click Schematic Reports > Schematic Reports. 6. Instead of using the description defaults, you manually enter the description. In the Insert / Edit Component dialog box, in the Description area, for Line 1, enter POWER. 7. For Line 2, enter ON. 8. Under Catalog Data, click Lookup. 9. In the Parts Catalog (Table: LT) dialog box, select AB, 800H-PR16R. Click OK. 10. In the Insert/Edit Component dialog box, click OK. 28 Chapter 1: Basic Workflow
29 14. In the Schematic Reports dialog box, in the Report Name area, select Bill of Material. 15. In the Bill of Material area, click Active Drawing. Click OK. 16. In the Qsave dialog box, click OK. A Bill of Material report is generated from component data within the drawing. You can save the report to any of five different file formats, or place on the drawing in the form of a table. 17. In the Report Generator dialog box, click Close. This completes the exercise. Lesson: Basic Workflow 29
30 Chapter Summary In this chapter you learned about the AutoCAD Electrical version of AutoCAD software. AutoCAD Electrical is created for electrical engineers who design industrial control systems. Along with the familiar AutoCAD working environment, an intuitive menu system is included that gives you access to many industry-specific tools that automate the electrical control systems design process. AutoCAD Electrical is an effective design tool for you to create schematics, diagrams, layouts, and related reports faster and more accurately than using AutoCAD software. 30 Chapter 1: Basic Workflow
Basic WorkflowChapter1:
Chapter 1 Basic WorkflowChapter1: This chapter describes the AutoCAD Electrical version of AutoCAD software. AutoCAD Electrical is created for electrical engineers who design industrial control systems.
More informationBasic WorkflowChapter1:
Chapter 1 Basic WorkflowChapter1: This chapter describes the AutoCAD Electrical version of AutoCAD software. AutoCAD Electrical is created for electrical engineers who design industrial control systems.
More informationWhat's New in AutoCAD Electrical 2006?
11/28/2005-5:00 pm - 6:30 pm Room:Pelican 2 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida What's New in AutoCAD Electrical 2006? Randy Brunette - Brunette Technologies, LLC MA15-2 You
More informationAutoCAD Electrical Customization from A to Z
11/30/2005-10:00 am - 11:30 am Room:Parrot 1/2 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida AutoCAD Electrical Customization from A to Z Randy Brunette - Brunette Technologies, LLC
More informationSettings and Configurations
Chapter 1 Settings and Configurations This chapter describes how to use settings and configuration options to change the appearance and functionality of AutoCAD Electrical to match your company's drawing
More informationSettings and Configurations
Chapter 1 Settings and Configurations This chapter describes how to use settings and configuration options to change the appearance and functionality of AutoCAD Electrical to match your company's drawing
More informationGetting Started. Introduction to the Basics. Cadpipe Control Center
Getting Started Introduction to the Basics Cadpipe Control Center When you first select the Cadpipe Program icon on your desktop, you will automatically start up the Cadpipe Control Center. The control
More informationQUICK START Hydraulics
QUICK START Hydraulics Quick Start Guide to Create Your First Hydraulic and Electro-Hydraulic Circuit in Automation Studio You can also view multiple training videos at: www.famictech.com/edu/videos-educational.html
More informationGetting Started Creating Cable and Harness DesignsChapter1:
Chapter 1 Getting Started Creating Cable and Harness DesignsChapter1: In this chapter, you learn about Autodesk Inventor Professional Cable and Harness functionality and the basic workflow to create and
More informationCreating electrical designs
Creating electrical designs 27.09.2018-34 TABLE OF CONTENTS Table of contents... 2 Introduction... 4 What you learn with this content... 5 Starting G-Electrical... 6 Interface... 6 Drawing area (1)...
More informationQUICK START PLC. 1. Basic Manipulations
QUICK START PLC Quick Start Guide to Create Your First PLC Circuit in Automation Studio You can also view multiple training videos at: www.famictech.com/edu/videos-educational.html 1. Basic Manipulations
More informationAutoCAD Electrical: 60 Tips in 60 Minutes
GEN21973 AutoCAD Electrical: 60 Tips in 60 Minutes Tiffany Bachmeier Autodesk, Inc. Learning Objectives Discover Project Management Tips and Tricks Discover Drawing Creation Tips and Tricks Discover Customization
More informationThe CAP Panel Builder technology is designed to construct and manage configurations of stack panel products.
About The CAP technology is designed to construct and manage configurations of stack panel products. Use the intuitive to assemble the components and control properties of stackable panels such as top
More informationGetting_started_EN (Ind : 3) 06/01/2014. elecworks. Getting Started
Getting_started_EN (Ind : 3) 06/01/2014 elecworks Getting Started 1 Start with elecworks This document has been made to help you in starting elecworks. It summarizes the features available. If you would
More informationTo change the shape of a floating toolbar
Modifying toolbars You can change the size of toolbar buttons and reposition, add, or delete toolbar buttons. You can also change the toolbar name and turn tooltips on and off. An important item to note-
More informationAutoCAD 2009 User InterfaceChapter1:
AutoCAD 2009 User InterfaceChapter1: Chapter 1 The AutoCAD 2009 interface has been enhanced to make AutoCAD even easier to use, while making as much screen space available as possible. In this chapter,
More informationGetting Started Creating Cable and Harness Designs
Chapter Getting Started Creating Cable and Harness Designs 1 In this chapter, you learn about Autodesk Inventor Cable and Harness functionality and the basic workflow to create and document a design. Objectives
More informationGetting Started. In This Chapter
Getting Started In This Chapter 2 This chapter introduces concepts and procedures that help you get started with AutoCAD. You learn how to open, close, and manage your drawings. You also learn about the
More informationTutorial. COPYRIGHT 2014 IGE+XAO. All rights reserved TUTORIAL. Your first steps with SEE Electrical Expert. The specialist of electrical software
TUTORIAL Your first steps with SEE Electrical Expert The specialist of electrical software Page 2 A.1. Conventions used in this tutorial TABLE OF CONTENTS A OVERVIEW... 5 A.1. CONVENTIONS USED IN THIS
More informationDescription. Randy Brunette Autodesk, Inc. Gaurav Sachdeva Autodesk, Inc.
IM10423 AutoCAD Electrical 2016 What s New Randy Brunette Autodesk, Inc. Gaurav Sachdeva Autodesk, Inc. Learning Objectives Discover possible new features of AutoCAD Electrical 2017 Discover how new features
More information1. Concepts and What s New Concepts What's New in E Getting Started Starting Electra Page Scale
1 1. Concepts and What s New... 6 1.1 Concepts... 6 1.2 What's New in E6... 7 2. Getting Started... 8 2.1 Starting Electra... 8 2.2 Page Scale... 8 2.3 Page Measurement Units... 9 2.4 Stencils and Drawing
More informationGet Powered Up: How to Implement AutoCAD Electrical
IT10734 Tiffany Bachmeier Autodesk Robert Stein Autodesk Learning Objectives Discover the WD.ENV file Discover AutoCAD Electrical intelligent blocks Discover AutoCAD Electrical paths Learn how to tie it
More informationPiping & Instrumentation Diagrams
Page 1 Piping & Instrumentation Diagrams Preface Using This Guide What's New? Getting Started Entering the Workbench Setting up Working Units and Grid Placing Components Routing a Piping Line or I & C
More informationICS Tutorials: Basic Operations
ICS Tutorials: Basic Operations This tutorial introduces the basic components of Builder Xcessory. For more detailed information, see the Builder Xcessory Reference Manual. This book is directly accessible
More informationManaging Content with AutoCAD DesignCenter
Managing Content with AutoCAD DesignCenter In This Chapter 14 This chapter introduces AutoCAD DesignCenter. You can now locate and organize drawing data and insert blocks, layers, external references,
More informationSolidWorks Implementation Guides. User Interface
SolidWorks Implementation Guides User Interface Since most 2D CAD and SolidWorks are applications in the Microsoft Windows environment, tool buttons, toolbars, and the general appearance of the windows
More informationHow Smart Are Your Tables? Jeanne Aarhus Aarhus Associates, LLC
How Smart Are Your Tables? Jeanne Aarhus Aarhus Associates, LLC AC2251-L Are you using tables in AutoCAD software to their fullest potential? Do you still manually collect data from your AutoCAD file,
More informationGetting Started. Introduction to the Basics. Cadpipe Control Center
Getting Started Introduction to the Basics Cadpipe Control Center The Cadpipe Control Center provides a central location to organize your projects, settings and drawings. For existing Industrial users,
More informationGetting Started with ShowcaseChapter1:
Chapter 1 Getting Started with ShowcaseChapter1: In this chapter, you learn the purpose of Autodesk Showcase, about its interface, and how to import geometry and adjust imported geometry. Objectives After
More informationAfter completing this lesson, you will be able to:
LEARNING OBJECTIVES After completing this lesson, you will be able to: 1. Create a template. 2. Understand the AutoCAD Window. 3. Understand the use of the function keys. 4. Select commands using the Pull-down
More informationAutoCAD Electrical Advanced: Looking Under the HOOD
: Looking Under the HOOD Scott Dibben D3 Technologies MA2730 Now that we have been using AutoCAD Electrical software in industry for a while, let's see what is under the hood that can make our life a little
More informationTutorial 3: Using the Waveform Viewer Introduces the basics of using the waveform viewer. Read Tutorial SIMPLIS Tutorials SIMPLIS provide a range of t
Tutorials Introductory Tutorials These tutorials are designed to give new users a basic understanding of how to use SIMetrix and SIMetrix/SIMPLIS. Tutorial 1: Getting Started Guides you through getting
More informationAutoCAD 2018 and AutoCAD LT 2018 Preview Guide
AutoCAD 2018 and AutoCAD LT 2018 Preview Guide Stay at the forefront of the design world with the new features in Autodesk AutoCAD 2018 software. Create and share precise drawings with innovative productivity
More informationAlternate assemblies
Alternate assemblies Publication Number spse01685 Alternate assemblies Publication Number spse01685 Proprietary and restricted rights notice This software and related documentation are proprietary to
More informationCharging on from Schematics to Panels in AutoCAD Electrical
Charging on from Schematics to Panels in AutoCAD Electrical Todd Schmoock Synergis Technologies MA4757-L: You have been using AutoCAD Electrical and discovered it is an easy tool for creating electrical
More informationGetting Started COPYRIGHTED MATERIAL. Chapter 1. Exploring the AutoCAD 2013 for Windows User Interface. Exploring the Graphical User Interface
Getting Started Chapter 1 P AutoCAD for Mac has a user interface that is customized to the Mac experience. Although the Mac user interface is not covered in this book, its commands and capabilities are
More informationTelePACE Studio Ladder Logic Training Manual
TelePACE Studio Ladder Logic Training Manual SCADA products... for the distance TelePACE Studio Ladder Editor Training Manual 1999-2009 Control Microsystems Inc. All rights reserved. Printed in Canada.
More informationExercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
More informationPiping & Instrumentation Diagrams
Piping & Instrumentation Diagrams Preface Using This Guide What's New? Getting Started Entering the Workbench Setting up Working Units and Grid Placing Components Routing a Piping Line or I & C Loop Placing
More informationMechanical Drawings Gone Wild
11/28/2005-1:00 pm - 2:30 pm Room:Mockingbird 1/2 [Lab] (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Mechanical Drawings Gone Wild Colleen Klein - MasterGraphics and Jim Swain (Assistant);
More informationimos Drawing Output The following document includes the topics borders and viewsets.
imos Drawing Output The following document includes the topics borders and viewsets. We have attempted to keep the content of the document complete, accurate and under permanent review. However, due to
More informationAfter completing this lesson, you will be able to:
LEARNING OBJECTIVES After completing this lesson, you will be able to: 1. Create a template. 2. Understand the AutoCAD Window. 3. Understand the use of the function keys. 4. Select commands using the Pull-down
More informationIntroduction to Autodesk VaultChapter1:
Introduction to Autodesk VaultChapter1: Chapter 1 This chapter provides an overview of Autodesk Vault features and functionality. You learn how to use Autodesk Vault to manage engineering design data in
More informationpromis-e to AutoCAD Electrical Conversion Guide
promis-e 1. If not already open activate the Tool Palettes Window (sidebar) from the top toolbar of AutoCAD Electrical. This menu will anchor itself at the right of your screen. 2. Click the promis-e Conversion
More informationHVAC Diagrams Preface What's New? Getting Started User Tasks
HVAC Diagrams Preface Using This Guide What's New? Getting Started Entering the Workbench Setting up Working Units and Grid Placing Components Routing an HVAC Line Placing Components in a Line Repositioning
More informationImpress Guide Chapter 11 Setting Up and Customizing Impress
Impress Guide Chapter 11 Setting Up and Customizing Impress This PDF is designed to be read onscreen, two pages at a time. If you want to print a copy, your PDF viewer should have an option for printing
More information9/7/2010. Chapter , The McGraw-Hill Companies, Inc. MOTOR SYMBOLS. 2010, The McGraw-Hill Companies, Inc.
Chapter 2 MOTOR SYMBOLS 1 Symbols are used to represent the different components of a motor control system. Symbols sometimes look nothing like the real thing, so we have to learn what the symbols mean.
More informationHow to Get Started. Figure 3
Tutorial PSpice How to Get Started To start a simulation, begin by going to the Start button on the Windows toolbar, then select Engineering Tools, then OrCAD Demo. From now on the document menu selection
More informationRebarCAD Usage Hints and Tips
RebarCAD Usage Hints and Tips Hints & Tips the Change Bar Style Command A drawing can have a combination of bar styles and bars can be changed from one style to another using the Change Bar Style command.
More informationSchematic Editing Essentials
Summary Application Note AP0109 (v2.0) March 24, 2005 This application note looks at the placement and editing of schematic objects in Altium Designer. This application note provides a general overview
More informationIn this chapter, I explain the essentials that you need to start drawings. After a
In this chapter, I explain the essentials that you need to start drawings. After a little background, I discuss the basics of the screen that you see when you open AutoCAD or AutoCAD LT, and how to use
More informationThe Ten Commandments of Equipment and Part Building in Autodesk AutoCAD Plant 3D
The Ten Commandments of Equipment and Part Building in Autodesk AutoCAD Plant 3D Creg Dieziger Sr. Designer, Morrison-Maierle, Inc. PD2940-L 90 Minutes - Hands-on Lab - 12/3/13 (Tuesday) 8:00 AM In this
More informationCorel Ventura 8 Introduction
Corel Ventura 8 Introduction Training Manual A! ANZAI 1998 Anzai! Inc. Corel Ventura 8 Introduction Table of Contents Section 1, Introduction...1 What Is Corel Ventura?...2 Course Objectives...3 How to
More informationGEN20626 Creating Dynamic Blocks in AutoCAD Only You Can Prevent Bloated Block Libraries
GEN20626 Creating Dynamic Blocks in AutoCAD Only You Can Prevent Bloated Block Libraries Tracy Chadwick Hutchinson Community College Learning Objectives Learn how to create Dynamic Blocks that can stretch,
More informationv Introduction to WMS WMS 11.0 Tutorial Become familiar with the WMS interface Prerequisite Tutorials None Required Components Data Map
s v. 11.0 WMS 11.0 Tutorial Become familiar with the WMS interface Objectives Import files into WMS and change modules and display options to become familiar with the WMS interface. Prerequisite Tutorials
More informationFast Content for AutoCAD MEP 2015
David Butts Gannett Fleming MP6393 AutoCAD MEP 2015 software, a world-class design and drafting application, is the Zen master of mechanical, electrical, and plumbing design software. The software continues
More informationCOPYRIGHTED MATERIAL. Starting to Draw. In this chapter, I explain the essentials that you need to start drawings. AutoCAD s advantages
Starting to Draw 1 C H A P T E R In this chapter, I explain the essentials that you need to start drawings. After a little background, I discuss the basics of the screen that you see when you open AutoCAD
More informationIntroduction to SolidWorks Basics Materials Tech. Wood
Introduction to SolidWorks Basics Materials Tech. Wood Table of Contents Table of Contents... 1 Book End... 2 Introduction... 2 Learning Intentions... 2 Modelling the Base... 3 Modelling the Front... 10
More informationCHAPTER 1 COPYRIGHTED MATERIAL. Getting to Know AutoCAD. Opening a new drawing. Getting familiar with the AutoCAD and AutoCAD LT Graphics windows
CHAPTER 1 Getting to Know AutoCAD Opening a new drawing Getting familiar with the AutoCAD and AutoCAD LT Graphics windows Modifying the display Displaying and arranging toolbars COPYRIGHTED MATERIAL 2
More informationTaking the AutoCAD TourChapter1:
Chapter 1 Taking the AutoCAD TourChapter1: Before you begin to use the software, you need to become famiar with the interface and some of the core functionaty and features. Objectives After completing
More informationWorking with Mailbox Manager
Working with Mailbox Manager A user guide for Mailbox Manager supporting the Message Storage Server component of the Avaya S3400 Message Server Mailbox Manager Version 5.0 February 2003 Copyright 2003
More informationPress the Plus + key to zoom in. Press the Minus - key to zoom out. Scroll the mouse wheel away from you to zoom in; towards you to zoom out.
Navigate Around the Map Interactive maps provide many choices for displaying information, searching for more details, and moving around the map. Most navigation uses the mouse, but at times you may also
More informationWorking with Plan Production ObjectsChapter1:
Chapter 1 Working with Plan Production ObjectsChapter1: The lessons in this chapter guide you through the processes of creating and working with plan production objects. Plan production objects include
More informationPublished by: Technologies Inc. 400 Armand-Frappier Blvd. Laval (Quebec) Canada H7V 4B4
Published by: 20-20 Technologies Inc. 400 Armand-Frappier Blvd. Laval (Quebec) Canada H7V 4B4 1998 2008 20-20 Technologies Inc. All rights reserved Printed in Canada. The name 20-20 Technologies and all
More informationGetting Started. Chapter
Chapter 1 Getting Started In this chapter you will launch AutoCAD P&ID and learn how to use the AutoCAD P&ID environment to create, edit and manage your piping and instrumentation diagrams. We will start
More informationIntegrating AutoCAD Electrical with Autodesk Vault Professional (formerly known as Vault Manufacturing) Randy Brunette Brunette Technologies, LLC
Integrating AutoCAD Electrical with Autodesk Vault Professional (formerly known as Vault Manufacturing) Randy Brunette Brunette Technologies, LLC DM34-1R Are you using AutoCAD Electrical now and thinking
More informationCruising the Strip: Terminal Strip Editor in AutoCAD Electrical
Cruising the Strip: Terminal Strip Editor in AutoCAD Electrical Jared Bunch Autodesk, Inc. MA4622 There are so many destinations along the strip to choose from that sometimes it can become overwhelming.
More informationUsing Open Workbench Version 1.1
Version 1.1 Second Edition Title and Publication Number Title: Edition: Second Edition Printed: May 4, 2005 Copyright Copyright 1998-2005 Niku Corporation and third parties. All rights reserved. Trademarks
More informationSetting Up Your Drawing Environment
Setting Up Your Drawing Environment In This Chapter 3 After you start a drawing, you can change its settings, including drawing units and limits, snap and grid settings, and layer, linetype, and lettering
More informationExplore some of the new functionality in ArcMap 10
Explore some of the new functionality in ArcMap 10 Scenario In this exercise, imagine you are a GIS analyst working for Old Dominion University. Construction will begin shortly on renovation of the new
More informationCourse 1 of the Beginners' Course is designed to help you become acquainted with the new user interface of the easysoft programming software.
Page 1 of 37 You are here: Beginners' Course Beginners' Course This section provides you with a Beginners' Course. You are here: Beginners' Course > Course 1 > Aim of Course Aim of Course Course 1 of the
More informationPanasonic VRF Software. New features of VRF software
Panasonic VRF Software New features of VRF software April 2013 1 Contents: Mounting scheme... 5 1. Import building scheme into software... 5 1.1. Export building scheme as DXF from AutoCAD... 5 1.2. Export
More informationCHAPTER 1 COPYRIGHTED MATERIAL. Finding Your Way in the Inventor Interface
CHAPTER 1 Finding Your Way in the Inventor Interface COPYRIGHTED MATERIAL Understanding Inventor s interface behavior Opening existing files Creating new files Modifying the look and feel of Inventor Managing
More informationCOMOS. Process P&ID Operation. Third-party software 1. Overview of the P&ID module 2. Preparations 3. Overview of P&ID objects 4.
Third-party software 1 Overview of the P&ID module 2 COMOS Process Operating Manual Preparations 3 Overview of P&ID objects 4 Create P&ID 5 Using components 6 Using pipes 7 Connecting objects 8 Data flow
More informationLaboratory Exercise 2. Power Distribution w/autocad Electrical
Laboratory Exercise 2 Power Distribution w/autocad Electrical Procedure 1. Use the One Line and Three Line Example Drawings to create two drawings with at least 20 one-line elements and two three-line
More informationCET Designer 9.5 Release Notes
CET Designer 9.5 Release Notes Important Notices Starting from this release, CET Designer is only available in a 64-bit version. For computers with damaged graphics drivers or a graphics unit that does
More informationBasic Concepts. Launching MultiAd Creator. To Create an Alias. file://c:\documents and Settings\Gary Horrie\Local Settings\Temp\~hh81F9.
Page 1 of 71 This section describes several common tasks that you'll need to know in order to use Creator successfully. Examples include launching Creator and opening, saving and closing Creator documents.
More informationLesson 1: Getting Started with
Microsoft Office Specialist 2016 Series Microsoft Outlook 2016 Certification Guide Lesson 1: Getting Started with Email Lesson Objectives In this lesson, you will learn to identify Outlook program items,
More informationOG10333-L Behind the Face Tips and Tricks in AutoCAD Plant 3D
OG10333-L Behind the Face Tips and Tricks in AutoCAD Plant 3D Bernd Gerstenberger Autodesk Learning Objectives Discover several, maybe surprising examples of how you can configure your project and your
More informationSystems Space Reservation
Systems Space Reservation Preface Using This Guide What's New? Getting Started Enter the Workbench Create an Equipment Reservation Set Correct Working Units and Grid Changing the Current Axis Saving Documents
More informationRandy H. Shih. Jack Zecher PUBLICATIONS
Randy H. Shih Jack Zecher PUBLICATIONS WWW.SDCACAD.COM AutoCAD LT 2000 MultiMedia Tutorial 1-1 Lesson 1 Geometric Construction Basics! " # 1-2 AutoCAD LT 2000 MultiMedia Tutorial Introduction Learning
More informationReaping the Benefits of Migrating to Autodesk Building Systems
Intro. 1 BD23-3 Reaping the Benefits of Migrating to Autodesk Building Systems Presenter(s) Daryl Bookout & Mike Kotanian Standards Annotation Existing Symbology Content Creation Labels Display Configurations
More informationChromatography Software Training Materials. Contents
Chromatography Software Training Materials This document contains information on how to build a method, start the instrument to acquire data, and then process the data using the Galaxie Program. You will
More informationPiping Design. Site Map Preface Getting Started Basic Tasks Advanced Tasks Customizing Workbench Description Index
Piping Design Site Map Preface Getting Started Basic Tasks Advanced Tasks Customizing Workbench Description Index Dassault Systèmes 1994-2001. All rights reserved. Site Map Piping Design member member
More informationTetra4D Reviewer. Version 5.1. User Guide. Details on how to use Tetra4D Reviewer.
Tetra4D Reviewer Version 5.1 User Guide Details on how to use Tetra4D Reviewer. ii Contents Chapter 1: Work area... 7 Looking at the work area... 7 Toolbars and toolbar presets... 8 About toolbars and
More informationDataPro Quick Start Guide
DataPro Quick Start Guide Introduction The DataPro application provides the user with the ability to download and analyze data acquired using the ULTRA-LITE PRO range of Auto Meter products. Please see
More informationImpress Guide Chapter 1 Introducing Impress
Impress Guide Chapter 1 Introducing Impress This PDF is designed to be read onscreen, two pages at a time. If you want to print a copy, your PDF viewer should have an option for printing two pages on one
More informationLearning the Pro/ENGINEER Interface
2 Learning the Pro/ENGINEER Interface This chapter introduces the Pro/ENGINEER interface tools: the menus, the dashboards, the selection tools and the viewing controls. As you go through this chapter,
More informationPipe Networks CHAPTER INTRODUCTION OBJECTIVES
CHAPTER 11 Pipe Networks INTRODUCTION Pipe networks are integral to a site-design solution. The piping system s complexity can vary from simple culverts to several storm and sanitary networks that service
More informationEquipment Support Structures
Page 1 Equipment Support Structures Preface Using This Guide Where to Find More Information Conventions What's New? Getting Started Setting Up Your Session Creating a Simple Structural Frame Creating Non-uniform
More informationCustomizing FlipCharts Promethean Module 2 (ActivInspire)
Customizing FlipCharts Promethean Module 2 (ActivInspire) Section 1: Browsers The browsers (located on the left side of the flipchart) are menus for various functions. To view the browsers, click Main
More information4. If you are prompted to enable hardware acceleration to improve performance, click
Exercise 1a: Creating new points ArcGIS 10 Complexity: Beginner Data Requirement: ArcGIS Tutorial Data Setup About creating new points In this exercise, you will use an aerial photograph to create a new
More informationAccess Review. 4. Save the table by clicking the Save icon in the Quick Access Toolbar or by pulling
Access Review Relational Databases Different tables can have the same field in common. This feature is used to explicitly specify a relationship between two tables. Values appearing in field A in one table
More informationTutorial Second Level
AutoCAD 2018 Tutorial Second Level 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
More informationv Overview SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
More informationFactoryLink 7. Version 7.0. Client Builder Reference Manual
FactoryLink 7 Version 7.0 Client Builder Reference Manual Copyright 2000 United States Data Corporation. All rights reserved. NOTICE: The information contained in this document (and other media provided
More informationLesson 5: Board Design Files
5 Lesson 5: Board Design Files Learning Objectives In this lesson you will: Use the Mechanical Symbol Editor to create a mechanical board symbol Use the PCB Design Editor to create a master board design
More informationMicroStation V8i Tips and Tricks and more
The following Tips and Tricks include features that are new in the version SELECTSeries 2&3 and some that have been around for a while enjoy Explorer the File Open dialog. Let s take a close look at the
More informationLESSON 5 LEARNING OBJECTIVES. After completing this lesson, you will be able to:
LEARNING OBJECTIVES After completing this lesson, you will be able to: 1. Create a Multiline Style 2. Draw a multiline 3. Edit a Multiline 4. Create and use Layer States LT users only 5. Double Line LESSON
More informationProject Planning. Module 4: Practice Exercises. Academic Services Unit PREPARED BY. August 2012
Project Planning PREPARED BY Academic Services Unit August 2012 Applied Technology High Schools, 2012 Module Objectives Upon successful completion of this module, students should be able to: 1. Select
More information