CP-D10. User's Manual (detailed) Operating Guide Technical. Example of PC signal. Projector
|
|
- Bethanie Paul
- 5 years ago
- Views:
Transcription
1 Projector CP-D10 User's Manual (detailed) Operating Guide Technical Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x VESA TEXT 640 x VESA VGA (60Hz) 640 x VESA VGA (72Hz) 640 x VESA VGA (75Hz) 640 x VESA VGA (85Hz) 800 x VESA SVGA (56Hz) 800 x VESA SVGA (60Hz) 800 x VESA SVGA (72Hz) 800 x VESA SVGA (75Hz) 800 x VESA SVGA (85Hz) 832 x Mac 16 mode 1024 x VESA XGA (60Hz) 1024 x VESA XGA (70Hz) 1024 x VESA XGA (75Hz) 1024 x VESA XGA (85Hz) 1152 x VESA 1152 x 864 (75Hz) 1280 x VESA W-XGA (60Hz) 1280 x VESA 1280 x 800 (60Hz) 1280 x VESA 1280 x 960 (60Hz) 1280 x VESA SXGA (60Hz) 1280 x VESA SXGA (75Hz) 1280 x VESA SXGA (85Hz) 1400 x VESA SXGA+ (60Hz) 1600 x VESA UXGA (60Hz) NOTE Be sure to check jack type, signal level, timing and resolution before connecting this projector to a PC. Some PCs may have multiple display screen modes. Use of some of these modes will not be possible with this projector. Depending on the input signal, full-size display may not be possible in some cases. Refer to the number of display pixels above. Although the projector can display signals with resolution up to UXGA (1600x1200), the signal will be converted to the projector s panel resolution before being displayed. The best display performance will be achieved if the resolutions of the input signal and projector panel are identical. Automatic adjustment may not function correctly with some input signals. The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G. 1
2 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d) Data Active video (C) Data H. Sync. V. Sync. Sync (A) Sync (a) Active video (c) Computer signal Horizontal signal timing (μs) Vertical signal timing (lines) (A) (B) (C) (D) (a) (b) (c) (d) 720 x 400 / TEXT x 480 / VGA (60Hz) x 480 / VGA (72Hz) x 480 / VGA (75Hz) x 480 / VGA (85Hz) x 600 / SVGA (56Hz) x 600 / SVGA (60Hz) x 600 / SVGA (72Hz) x 600 / SVGA (75Hz) x 600/SVGA (85Hz) x 624 / Mac 16" mode x 768 / XGA (60Hz) x 768 / XGA (70Hz) x 768 / XGA (75Hz) x 768 / XGA (85Hz) x 864 (75Hz) x 768 / W-XGA (60Hz) x 800 (60Hz) x 960 (60Hz) x 1024 / SXGA (60Hz) x 1024 / SXGA (75Hz) x 1024 / SXGA (85Hz) x 1050 / SXGA+ (60Hz) x 1200 / UXGA (60Hz)
3 Connection to the ports Connection to the ports NOTICE Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. A B C A COMPUTER IN1, B COMPUTER IN2, C MONITOR OUT D-sub 15pin mini shrink jack (1) for PC signal Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) H/V. sync. Signal: TTL level (positive/negative) Composite sync. Signal: TTL level Pin Signal Pin Signal 1 Video Red 10 Ground 2 Video Green 11 (No connection) 3 Video Blue A : SDA (DDC data) 12 4 (No connection) B, C : (No connection) 5 Ground 13 H. sync / Composite sync. 6 Ground Red 14 V. sync. 7 Ground Green A : SCL (DDC clock) 15 8 Ground Blue B, C : (No connection) 9 (No connection) - - (2) for Component signal Y : Component video Y with composite sync, 1.0±0.1 Vp-p, 75 Ω terminator Cr/Pr : Component video Cr/Pr, 0.7±0.1 Vp-p, 75 Ω terminator Cb/Pb : Component video Cb/Pb, 0.7±0.1 Vp-p, 75 Ω terminator System:480i@60,480p@60,576i@50,576p@50,720p@50/60,1080i@50/60,1080p@50/60 Pin Signal Pin Signal 1 Cr/Pr 9 (No connection) 2 Y 10 Ground 3 Cb/Pb 11 (No connection) 4 (No connection) 12 (No connection) 5 Ground 13 (No connection) 6 Ground Cr/Pr 14 (No connection) 7 Ground Y 15 (No connection) 8 Ground Cb/Pb - - 3
4 Connection to the ports (continued) To input component video signal to COMPUTER IN ports ex. D-sub plug RCA plugs Y CB/PB CR/PR COMPONENT VIDEO OUT RCA connectors VCR/DVD player To input component video signal to the COMPUTER IN1 or IN2 port of the projector, use a RCA to D-sub cable or adapter. For about the pin description of the required cable or adapter, refer to the descriptions about COMPUTER IN1 and IN2 port ( 3). 4
5 Connection to the ports (continued) D E D S-VIDEO Mini DIN 4pin jack Pin Signal Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator 1 Color signal 0.300Vp-p (PAL/SECAM, burst) 75Ω terminator 2 Brightness signal, 1.0Vp-p, 75Ω terminator 3 Ground 4 Ground E VIDEO RCA jack System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL60 1.0±0.1Vp-p, 75Ω terminator 5
6 Connection to the ports (continued) F G H I J K F AUDIO IN1, G AUDIO IN2 Ø3.5 stereo mini jack 200 mvrms 47kΩ terminator AUDIO IN3 H R, I L RCA jack x2 200 mvrms 47kΩ terminator AUDIO OUT J R, K L RCA jack x2 200 mvrms 1kΩ output impedance 6
7 Connection to the ports (continued) L L CONTROL D-sub 9pin plug About the details of RS-232C communication, please refer to the following page Pin Signal Pin Signal Pin Signal 1 (No connection) 4 (No connection) 7 RTS 2 RD 5 Ground 8 CTS 3 TD 6 (No connection) 9 (No connection) 7
8 RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with RS-232C commands from the computer. For details of RS-232C commands, refer to RS-232C Communication command table ( 9). Connection Turn off the projector and the computer. Connect the projector's CONTROL port and the computer's RS-232C port with a RS-232C cable (cross). Use the cable that fulfi lls the specifi cation shown in fi gure 3. Turn the computer on, and after the computer has started up turn the projector on. RS-232C CONTROL RS-232C Cable (cross) RS-232C port of the computer CONTROL port of the projector CD (1) RD(2) TD (3) DTR (4) GND (5) DSR (6) RTS (7) DTS (8) RI (9) (1) (2) RD (3) TD (4) (5) GND (6) (7) RTS (8) CTS (9)
9 Communicaion settings 1. Protocol 19200bps,8N1 2. Command format ("h" shows hexadecimal) Action RS-232C Communication (continued) Byte Number Command <SET>Change setting to desired value [(cl)(ch)] by [(el)(eh)]. <GET>Read projector internal setup value [(bl) (bh)]. <INCREMENT> Increment setup value [(bl)(bh)] by 1. <DECREMENT> Decrement setup value [(bl)(bh)] by 1. <EXECUTE> Run a command [(bl)(bh)]. Header Data Header Data CRC code Packet size flag Action Type Setting code L H L H L H L H L H L H BEh EFh 03h 06h 00h (al) (ah) 01h 00h (bl) (bh) (cl) (ch) (al) (ah) 02h 00h (bl) (bh) 00h 00h (al) (ah) 04h 00h (bl) (bh) 00h 00h (al) (ah) 05h 00h (bl) (bh) 00h 00h (al) (ah) 06h 00h (bl) (bh) 00h 00h [Header code] [Packet] [Data size] Set [BEh, EFh, 03h, 06h, 00h] to byte number 0 ~ 4. [CRC flag] For byte number 5, 6, refer to RS-232C Communication command table ( 11). [Action] Set functional code to byte number 7, 8. <SET> = [01h, 00h], <GET> = [02h, 00h], <INCREMENT> =[04h, 00h] <DECREMENT> = [05h, 00h], <EXECUTE> = [06h, 00h] Refer to the Communication command table ( above). [Type] [Setting code] For byte number 9 12, refer to RS-232C Communication command table ( 11). 9
10 RS-232C Communication (continued) 3. Response code / Error code ("h" shows hexadecimal) (1) ACK reply : 06h When the projector receives the Set, Increment, Decrement or Execute command correctly, the projector changes the setting data for the specified item by [Type], and it returns the code. (2) NAK reply : 15h When the projector cannot understand the received command, the projector returns the error code. In such a case, check the sending code and send the same command again. (3) Error reply : 1Ch h When the projector cannot execute the received command for any reasons, the projector returns the error code. In such a case, check the sending code and the setting status of the projector. (4) Data reply : 1Dh + xxxxh When the projector receives the GET command correctly, the projector returns the responce code and 2 bytes of data. NOTE Operation cannot be guaranteed when the projector receives an undefined command or data. Provide an interval of at least 40ms between the response code and any other code. The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data. Commands are not accepted during warm-up. 10
11 RS-232C Communication command table RS-232C Communication command table Power Set OFF BE EF A D ON BE EF BA D Get BE EF D [Example return] [Off] [On] [Cool down] Input Source Set COMPUTER IN1 BE EF FE D COMPUTER IN2 BE EF E D S-VIDEO BE EF E D VIDEO BE EF E D Get BE EF CD D Error Status Get BE EF D9 D [Example return] [Normal] [Cover error] [Fan error] [Lamp error] [Temp error] [Air flow error] [Cold error] [Filter error] MAGNIFY Get BE EF C D Increment BE EF A D Decrement BE EF CB D Magnify Position H Get BE EF C8 D Increment BE EF AE D Decrement BE EF F D Magnify Position V Get BE EF D Increment BE EF D Decrement BE EF D FREEZE Set NORMAL BE EF D FREEZE BE EF D Get BE EF B0 D BRIGHTNESS Get BE EF D Increment BE EF EF D Decrement BE EF E D BRIGHTNESS Reset Execute BE EF D CONTRAST Get BE EF FD D Increment BE EF B D Decrement BE EF A D CONTRAST Reset Execute BE EF A4 D PICTURE MODE Set NORMAL BE EF F BA CINEMA BE EF B3 F BA DYNAMIC BE EF E3 F BA BOARD(BLACK) BE EF E3 EF BA BOARD(GREEN) BE EF EE BA WHITEBOARD BE EF EE BA DAYTIME BE EF E3 C BA CUSTOM BE EF E3 FB BA Get BE EF F BA (continued on next page) 11
12 RS-232C Communication command table (continued) GAMMA Set #1 DEFAULT BE EF E A #2 DEFAULT BE EF E A #3 DEFAULT BE EF E A #4 DEFAULT BE EF F7 E A #5 DEFAULT BE EF C7 EB A #6 DEFAULT BE EF EA A #1 CUSTOM BE EF FD A #2 CUSTOM BE EF FC A #3 CUSTOM BE EF FC A #4 CUSTOM BE EF F7 FD A #5 CUSTOM BE EF C7 FF A #6 CUSTOM BE EF FE A Get BE EF F4 F A User Gamma Pattern Set Off BE EF FB FA steps gray scale BE EF B FB steps gray scale BE EF B FB Ramp BE EF B FA Get BE EF C8 FA User Gamma Point 1 Get BE EF FE Increment BE EF E FE Decrement BE EF BF FF User Gamma Point 1 Reset Execute BE EF C User Gamma Point 2 Get BE EF F4 FF Increment BE EF FF Decrement BE EF FE User Gamma Point 2 Reset Execute BE EF A4 C User Gamma Point 3 Get BE EF B0 FF Increment BE EF D6 FF Decrement BE EF FE User Gamma Point 3 Reset Execute BE EF E0 C User Gamma Point 4 Get BE EF C FE Increment BE EF A FE Decrement BE EF FB FF User Gamma Point 4 Reset Execute BE EF C C User Gamma Point 5 Get BE EF FF Increment BE EF E FF Decrement BE EF F FE User Gamma Point 5 Reset Execute BE EF C User Gamma Point 6 Get BE EF C4 FE Increment BE EF A2 FE Decrement BE EF FF User Gamma Point 6 Reset Execute BE EF C User Gamma Point 7 Get BE EF FE Increment BE EF E6 FE Decrement BE EF FF User Gamma Point 7 Reset Execute BE EF D0 C (continued on next page) 12
13 RS-232C Communication command table (continued) User Gamma Point 8 Get BE EF C FF Increment BE EF A FF Decrement BE EF CB FE User Gamma Point 8 Reset Execute BE EF C C COLOR TEMP Set #1 HIGH BE EF B F B #2 MID BE EF B F B #3 LOW BE EF B F B #4 Hi-BRIGHT-1 BE EF B F B #5 Hi-BRIGHT-2 BE EF AB F B #6 Hi-BRIGHT-3 BE EF B F B0 30 0A 00 #1 CUSTOM (HIGH) BE EF CB F B #2 CUSTOM (MID) BE EF B F B #3 CUSTOM (LOW) BE EF AB F B #4 CUSTOM (Hi- BRIGHT-1) BE EF FB FF B #5 CUSTOM (Hi- BRIGHT-2) BE EF B FE B #6 CUSTOM (Hi- BRIGHT-3) BE EF B FE B0 30 1A 00 Get BE EF C8 F B COLOR TEMP GAIN R Get BE EF F B Increment BE EF F B Decrement BE EF F B COLOR TEMP GAIN R Reset Execute BE EF C COLOR TEMP GAIN G Get BE EF F B Increment BE EF F B Decrement BE EF C7 F B COLOR TEMP GAIN G Reset Execute BE EF EC C COLOR TEMP GAIN B Get BE EF C F B Increment BE EF EA F B Decrement BE EF B F B COLOR TEMP GAIN B Reset Execute BE EF F8 C COLOR TEMP OFFSET R COLOR TEMP OFFSET R Reset COLOR TEMP OFFSET G COLOR TEMP OFFSET G Reset COLOR TEMP OFFSET B COLOR TEMP OFFSET B Reset Get BE EF F B Increment BE EF F B Decrement BE EF B3 F B Execute BE EF C A Get BE EF F B Increment BE EF F B Decrement BE EF F7 F B Execute BE EF BC C B Get BE EF BC F B Increment BE EF DA F B Decrement BE EF B F B Execute BE EF C8 C C (continued on next page) 13
14 RS-232C Communication command table (continued) COLOR Get BE EF B Increment BE EF D Decrement BE EF COLOR Reset Execute BE EF D A TINT Get BE EF Increment BE EF F Decrement BE EF FE TINT Reset Execute BE EF C D B SHARPNESS Get BE EF F Increment BE EF Decrement BE EF SHARPNESS Reset Execute BE EF C4 D MY MEMORY Load Set 1 BE EF E D BE EF E D BE EF E D BE EF FE D MY MEMORY Save Set 1 BE EF F2 D BE EF D BE EF D BE EF D ASPECT Set 4:3 BE EF E D :9 BE EF E D NATIVE BE EF E D :9 BE EF CE D :10 BE EF E D A 00 NORMAL BE EF E DD Get BE EF AD D OVER SCAN Get BE EF Increment BE EF F Decrement BE EF OVER SCAN Reset Execute BE EF EC D V POSITION Get BE EF D Increment BE EF B Decrement BE EF BA V POSITION Reset Execute BE EF E0 D H POSITION Get BE EF F Increment BE EF Decrement BE EF H POSITION Reset Execute BE EF C D H PHASE Get BE EF Increment BE EF F Decrement BE EF FE (continued on next page) 14
15 RS-232C Communication command table (continued) H SIZE Get BE EF B Increment BE EF D Decrement BE EF H SIZE Reset Execute BE EF D AUTO ADJUST Execute BE EF D A PROGRESSIVE Set OFF BE EF A TV BE EF DA FILM BE EF A Get BE EF VIDEO NR Set LOW BE EF MIDDLE BE EF D HIGH BE EF Get BE EF COLOR SPACE Set AUTO BE EF E RGB BE EF E SMPTE240 BE EF E REC709 BE EF FE REC601 BE EF CE Get BE EF D S-VIDEO FORMAT Set AUTO BE EF E A 00 NTSC BE EF PAL BE EF SECAM BE EF NTSC4.43 BE EF M-PAL BE EF N-PAL BE EF Get BE EF C-VIDEO FORMAT Set AUTO BE EF A A 00 NTSC BE EF C PAL BE EF SECAM BE EF NTSC4.43 BE EF M-PAL BE EF C N-PAL BE EF Get BE EF COMPUTER IN1 Set AUTO BE EF CE D SYNC ON G OFF BE EF E D Get BE EF D D COMPUTER IN2 Set AUTO BE EF D SYNC ON G OFF BE EF A2 D Get BE EF F1 D (continued on next page) 15
16 RS-232C Communication command table (continued) FRAME LOCK COMPUTER IN1 Set OFF BE EF B C ON BE EF AB C Get BE EF C FRAME LOCK Set OFF BE EF B C COMPUTER IN2 ON BE EF B C Get BE EF C KEYSTONE V Get BE EF B9 D Increment BE EF DF D Decrement BE EF E D KEYSTONE V Reset Execute BE EF D C ECO MODE Set NORMAL BE EF B ECO BE EF AB Get BE EF MIRROR Set NORMAL BE EF C7 D H:INVERT BE EF D V:INVERT BE EF A7 D H&V:INVERT BE EF D Get BE EF F4 D STANDBY MODE Set NORMAL BE EF D6 D SAVING BE EF D Get BE EF E5 D MONITOR OUT - COMPUTER IN1 MONITOR OUT - COMPUTER IN2 MONITOR OUT - S-VIDEO MONITOR OUT - VIDEO MONITOR OUT - STANDBY VOLUME - COMPUTER IN1 Set COMPUTER IN1 BE EF E F B OFF BE EF CE B B0 20 FF 00 Get BE EF D F B Set COMPUTER IN2 BE EF CE F B OFF BE EF FE B B4 20 FF 00 Get BE EF D F B Set COMPUTER IN1 BE EF F B COMPUTER IN2 BE EF F B OFF BE EF B B2 20 FF 00 Get BE EF B5 F B Set COMPUTER IN1 BE EF C2 F B COMPUTER IN2 BE EF F B OFF BE EF B B1 20 FF 00 Get BE EF F1 F B Set COMPUTER IN1 BE EF A F BF COMPUTER IN2 BE EF EA F BF OFF BE EF DA B BF 20 FF 00 Get BE EF F BF Get BE EF CD CC Increment BE EF AB CC Decrement BE EF A CD (continued on next page) 16
17 RS-232C Communication command table (continued) VOLUME - COMPUTER IN2 Get BE EF FD CD Increment BE EF B CD Decrement BE EF A CC VOLUME - S-VIDEO Get BE EF CD Increment BE EF CD Decrement BE EF C2 CC VOLUME - VIDEO Get BE EF CD Increment BE EF CD Decrement BE EF CC VOLUME - Get BE EF D9 CF F AUDIO OUT STANDBY Increment BE EF BF CF F Decrement BE EF E CE F MUTE Set OFF BE EF D ON BE EF D6 D Get BE EF D SPEAKER Set OFF BE EF E D C ON BE EF FE D C Get BE EF D D C AUDIO - COMPUTER IN1 AUDIO - COMPUTER IN2 Set OFF BE EF FE DD AUDIO1 BE EF E DC AUDIO2 BE EF E DC AUDIO3 BE EF E DD Get BE EF CD DD Set OFF BE EF CE DC AUDIO1 BE EF E DD AUDIO2 BE EF AE DD AUDIO3 BE EF E DC Get BE EF FD DC AUDIO - S-VIDEO Set OFF BE EF DC AUDIO1 BE EF D6 DD AUDIO2 BE EF DD AUDIO3 BE EF B6 DC Get BE EF DC AUDIO - VIDEO Set OFF BE EF DC AUDIO1 BE EF DD AUDIO2 BE EF DD AUDIO3 BE EF F2 DC Get BE EF DC (continued on next page) 17
18 RS-232C Communication command table (continued) AUDIO OUT STANDBY Set OFF BE EF EA DE F AUDIO1 BE EF A DF F AUDIO2 BE EF A DF F AUDIO3 BE EF A DE F Get BE EF D9 DE F LANGUAGE * Set ENGLISH BE EF F7 D FRANÇAIS BE EF D DEUTSCH BE EF D ESPAÑOL BE EF D ITALIANO BE EF D NORSK BE EF A7 D NEDERLANDS BE EF D PORTUGUÊS BE EF C7 D BE EF D BE EF A7 D BE EF D A 00 SVENSKA BE EF C7 D B 00 PУCCKИЙ BE EF F7 D C 00 SUOMI BE EF D D 00 POLSKI BE EF D E 00 TÜRKÇE BE EF D F 00 BE EF DE DANSK BE EF A7 DF ČESKY BE EF DF MAGYAR BE EF C7 DE ROMÂNĂ BE EF F7 DC SLOVENSKI BE EF DD HRVATSKI BE EF DD ΕΛΛΗΝΙΚΑ BE EF DC LIETUVIŲ BE EF F7 D EESTI BE EF D LATVIEŠU BE EF D A 00 ไทย BE EF D B 00 ةیبرعلا ةغللا BE EF DB C 00 ىسراف BE EF A7 DA D 00 PORTUGUÊS BRA BE EF DA E 00 Get BE EF C4 D MENU POSITION H Get BE EF D Increment BE EF D Decrement BE EF B3 D MENU POSITION H Reset Execute BE EF DC C MENU POSITION V Get BE EF D Increment BE EF D Decrement BE EF F7 D MENU POSITION V Reset Execute BE EF A8 C * Not all of the languages in the table are supported. 18 (continued on next page)
19 RS-232C Communication command table (continued) BLANK Set MyScreen BE EF FB CA ORIGINAL BE EF FB E BLUE BE EF CB D WHITE BE EF B D BLACK BE EF B D Get BE EF D BLANK On/Off Set OFF BE EF FB D ON BE EF B D Get BE EF C8 D START UP Set MyScreen BE EF CB CB ORIGINAL BE EF B D OFF BE EF B D Get BE EF D MyScreen Lock Set OFF BE EF B EF C ON BE EF AB EE C Get BE EF EF C MESSAGE Set OFF BE EF F D ON BE EF F D Get BE EF BC D TEMPLATE Set TEST PATTERN BE EF D DOT-LINE1 BE EF D3 D DOT-LINE2 BE EF D DOT-LINE3 BE EF B3 D DOT-LINE4 BE EF DB CIRCLE 1 BE EF DA CIRCLE 2 BE EF E3 DA MAP 1 BE EF D MAP 2 BE EF D Get BE EF D TEMPLATE On/Off Set OFF BE EF BF D ON BE EF F D Get BE EF C D AUTO SEARCH Set OFF BE EF B6 D ON BE EF D Get BE EF D DIRECT POWER ON Set OFF BE EF B ON BE EF AB Get BE EF (continued on next page) 19
20 RS-232C Communication command table (continued) AUTO POWER OFF Get BE EF Increment BE EF E Decrement BE EF BF LAMP TIME Get BE EF C2 FF LAMP TIME Reset Execute BE EF DC FILTER TIME Get BE EF C2 F A FILTER TIME Reset Execute BE EF C MY BUTTON-1 Set COMPUTER IN1 BE EF A COMPUTER IN2 BE EF FA S-VIDEO BE EF A VIDEO BE EF AA INFORMATION BE EF FA 3E MY MEMORY BE EF A 3F PICTURE MODE BE EF A 3E FILTER RESET BE EF A 3C AV MUTE BE EF AA TEMPLATE BE EF CA B 00 D-ZOOM BE EF FA 3B C 00 D-SHIFT BE EF A 3A D 00 RESOLUTION BE EF A 3A E 00 Get BE EF MY BUTTON-2 Set COMPUTER IN1 BE EF C COMPUTER IN2 BE EF S-VIDEO BE EF A VIDEO BE EF INFORMATION BE EF F MY MEMORY BE EF E PICTURE MODE BE EF F6 3F FILTER RESET BE EF C6 3D AV MUTE BE EF TEMPLATE BE EF B 00 D-ZOOM BE EF A C 00 D-SHIFT BE EF B D 00 RESOLUTION BE EF B E 00 Get BE EF F MY SOURCE Set COMPUTER IN1 BE EF FA COMPUTER IN2 BE EF A 3A S-VIDEO BE EF A VIDEO BE EF A Get BE EF C REMOTE FREQ. NORMAL REMOTE FREQ. HIGH Set Disable BE EF FF 3D Enable BE EF F 3C Get BE EF CC 3D Set Disable BE EF C Enable BE EF D Get BE EF C (continued on next page) 20
21 RS-232C Communication command table (continued) D-ZOOM Get BE EF D0 D A Increment BE EF B6 D A Decrement BE EF D A D-ZOOM Reset Execute BE EF C D-SHIFT V Get BE EF C D B Increment BE EF A D B Decrement BE EF B D B D-SHIFT V Reset Execute BE EF A8 C D-SHIFT H Get BE EF D C Increment BE EF E D C Decrement BE EF EF D C D-SHIFT H Reset Execute BE EF C PICTURE POSITION Set TOP BE EF D MID BE EF D BOTTOM BE EF F2 D Get BE EF D CLOSED CAPTION DISPLAY CLOSED CAPTION MODE CLOSED CAPTION CHANNEL Set OFF BE EF FA ON BE EF A AUTO BE EF A Get BE EF C set CAPTIONS BE EF TEXT BE EF Get BE EF Set 1 BE EF D BE EF BE EF B BE EF Get BE EF
Example of PC signal. Projector CP-X2010/CP-X2510/CP-X3010 User's Manual (detailed) Operating Guide Technical
Projector CP-X2010/CP-X2510/CP-X3010 User's Manual (detailed) Operating Guide Technical Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0
More informationDigital Projector X30 Operator's Guide TECHNICAL
Digital Projector X30 Operator's Guide TECHNICAL Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA
More informationCP-X253. User's Manual (detailed) Technical. Example of PC signal. Projector
Projector CP-X253 User's Manual (detailed) Technical Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA
More informationX64. Operator's Guide TECHNICAL. Example of PC signal
X64 Operator's Guide TECHNICAL Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480
More informationTECHNICAL CP-SX1350. User's Manual - Operating Guide. Dimensions. Projector. [unit: mm]
INTER M1-D INPUT LENS SHIFT FOCUS ZOOM RESET COMPONENT VIDEO STANDBY/ON TEMP LAMP MENU Projector CP-SX1350 User's Manual - Operating Guide TECHNICAL KEYSTONE SEARCH RGB BNG S-VIDEO Dimensions [unit: mm]
More informationDigital Projector X30N/X35N
Digital Projector X30N/X35N Operator's Guide TECHNICAL Warranty 3M warrants that when the 3M Product is used according to 3M s Intended Use Statement (www.3m.com/meetings), it will perform satisfactorily
More informationCP-SX635. User's Manual Operating Guide Technical. Projector
Projector CP-SX635 User's Manual Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480
More informationCP-X2514WN/CP-X3014WN/ CP-X4014WN/CP-WX3014WN
Projector CP-X2514WN/CP-X3014WN/ CP-X4014WN/CP-WX3014WN User's Manual (detailed) Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal
More informationCP-DW10N. User's Manual (detailed) Operating Guide Technical. Example of PC signal. Projector
Projector CP-DW10N User's Manual (detailed) Operating Guide Technical Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x
More informationCP-D27WN/CP-D32WN/CP-DW25WN
Projector CP-D27WN/CP-D32WN/CP-DW25WN User's Manual (detailed) Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400
More informationDigital Projector X56
Digital Projector X56 Operator's Guide TECHNICAL Warranty 3M warrants that when the 3M Product is used according to 3M s Intended Use Statement (www.3m.com/meetings), it will perform satisfactorily for
More informationDigital Projector X30N/X35N
Digital Projector X30N/X35N Operator's Guide TECHNICAL Warranty 3M warrants that when the 3M Product is used according to 3M s Intended Use Statement (www.3m.com/meetings), it will perform satisfactorily
More informationUser's Manual (detailed) Operating Guide Technical Example of PC signal
Projector CP-X2015WN/CP-X2515WN/CP-X3015WN/ CP-X4015WN/CP-WX2515WN/CP-WX3015WN User's Manual (detailed) Operating Guide Technical Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency
More informationCP-X4022WN/CP-X5022WN/ CP-WX4022WN
Projector CP-X4022WN/CP-X5022WN/ CP-WX4022WN User's Manual (detailed) Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720
More informationUser's Manual (detailed) Operating Guide Technical
Projector CP-X4022WN/CP-X5022WN/ CP-WX4022WN User's Manual (detailed) Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720
More informationResolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode
Projector CP-TW2503/CP-TW3003 User's Manual (detailed) Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0
More informationDigital Projector X95i Operator's Guide
Digital Projector X95i Operator's Guide TECHNICAL Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9
More information8950W. User's Manual (detailed) Operating Guide Technical. LCD Projector. Supported signals for COMPUTER IN
LCD Projector 8950W User's Manual (detailed) Operating Guide Technical Supported signals for COMPUTER IN Resolution (H x V) Signal mode H. frequency V. frequency Rating (khz) (Hz) 720 x 400 TEXT 37.9 85
More information10. RS-232C communication
10. RS-232C communication PB9200(P5XMLA) Connecting the cable (1) Turn off the projector and the computer power supplies. (2) Connect the CONTROL port of the projector with a RS-232C port of the computer
More informationCP-TW3506. User's Manual (detailed) Operating Guide Technical. LCD Projector. Supported signals for COMPUTER IN
LCD Projector CP-TW3506 User's Manual (detailed) Operating Guide Technical Supported signals for COMPUTER IN Resolution (H x V) Signal mode H. frequency V. frequency Rating (khz) (Hz) 720 x 400 TEXT 37.9
More informationLCD Projector CP-WU5500/CP-WX5500/CP-X5550 CP-WU5505/CP-WX5505/CP-X5555 User's Manual (detailed) Operating Guide Technical
LCD Projector CP-WU5500/CP-WX5500/CP-X5550 CP-WU5505/CP-WX5505/CP-X5555 User's Manual (detailed) Operating Guide Technical Supported signals for COMPUTER IN Resolution (H x V) Signal mode H. frequency
More informationLW502/LWU502 User's Manual (detailed) Operating Guide - Technical
LW502/LWU502 User's Manual (detailed) Operating Guide - Technical 020-001099-01 LCD Projector LW502/LWU502 User's Manual (detailed) Operating Guide Technical Supported signals for COMPUTER IN Resolution
More informationLP-AW4001/LP-AW3001/LP-AX3001
LCD Projector LP-AW4001/LP-AW3001/LP-AX3001 User's Manual (detailed) Operating Guide Technical Supported signals for COMPUTER IN Resolution (H x V) Signal mode H. frequency V. frequency Rating (khz) (Hz)
More informationProjector CP-WU8700/CP-WX8750/CP-X8800 CP-WU8600/CP-WX8650 User's Manual (detailed) Operating Guide Technical
Projector CP-WU8700/CP-WX8750/CP-X8800 CP-WU8600/CP-WX8650 User's Manual (detailed) Operating Guide Technical Supported signals for COMPUTER IN Resolution (H x V) Signal mode H. frequency V. frequency
More informationLX750/LW650/LS+700/LW720
LX750/LW650/LS+700/LW720 User Manual - Technical Guide 020-000161-02 Projector LW650/LS+700/LX750/LW720 User's Manual Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency
More information1. D-sub 15-pin Shrink Connector (RGB IN 1/RGB IN 2/RGB OUT) Pin No Signal Pin No Signal Pin No Signal 1 Video input Red 9 -
Dimension Diagram 98 9.6 76. Pin No Signal Pin No Signal Pin No Signal Video input Red 9 - RGB IN : SCL(DDC) Video input Green 0 Ground RGB IN : - Video input Blue - RGB OUT: - - RGB IN : SDA(DDC) Ground
More information1. D-sub 15-pin Shrink Connector (RGB IN 1/RGB IN 2/RGB OUT) Pin No Signal Pin No Signal Pin No Signal 1 Video input Red 9 -
TECHNICAL Dimension Diagram 98 5 9.6 76.5 Pin No Signal Pin No Signal Pin No Signal Video input Red 9 - RGB IN : SCL(DDC) Video input Green 0 Ground 5 RGB IN : - 3 Video input Blue - RGB OUT: - - RGB IN
More informationLP-WU9100B User's Manual (detailed) Operating Guide Technical
DLP Projector LP-WU9100B User's Manual (detailed) Operating Guide Technical Supported Signal Input Modes Signal Format PC Apple MAC SDTV EDTV Resolution H Freq. KHz Frame Rate Hz PCLK MHz 5 B N C VGA RGB
More informationRS-232c Protocol Control Specifications
FDP-DLPHD10 Home Theater Optimized Digital Projector RS-232c Protocol Control Specifications Table of Contents 1. INTRODUCTION 3 2. RS-232C INTERFACE 3 3. COMMUNICATION PROTOCOL 4 HEADER 4 PAYLOAD 4 4.
More informationDOMINO 20H DOMINO 30H DLP VIDEO PROJECTOR RS-232C CONTROL SPECIFICATIONS. Document Revision 1.1 (20 July 2004)
DOMINO 20H DOMINO 30H DLP VIDEO PROJECTOR RS-232C CONTROL SPECIFICATIONS Document Revision 1.1 (20 July 2004) Table of Contents 1. INTRODUCTION 3 2. CONNECTION 3 3. COMMUNICATION PROTOCOL 4 HEADER 4 PAYLOAD
More informationCIS-331 Fall 2014 Exam 1 Name: Total of 109 Points Version 1
Version 1 1. (24 Points) Show the routing tables for routers A, B, C, and D. Make sure you account for traffic to the Internet. Router A Router B Router C Router D Network Next Hop Next Hop Next Hop Next
More informationCIS-331 Exam 2 Fall 2015 Total of 105 Points Version 1
Version 1 1. (20 Points) Given the class A network address 117.0.0.0 will be divided into multiple subnets. a. (5 Points) How many bits will be necessary to address 4,000 subnets? b. (5 Points) What is
More informationVCCI (VCCI) ENERGY STAR ENERGY STAR
VCCI (VCCI) B ENERGY STAR ENERGY STAR ENERGY STAR ... 1... 5... 5... 5... 6... 7... 8... 9... 10... 11... 13... 14... 21... 23... 24... 25... 26 /... 26... 26... 26 /... 26 A... 27... 27... 28... 29...
More informationCIS-331 Fall 2013 Exam 1 Name: Total of 120 Points Version 1
Version 1 1. (24 Points) Show the routing tables for routers A, B, C, and D. Make sure you account for traffic to the Internet. NOTE: Router E should only be used for Internet traffic. Router A Router
More informationCIS-331 Spring 2016 Exam 1 Name: Total of 109 Points Version 1
Version 1 Instructions Write your name on the exam paper. Write your name and version number on the top of the yellow paper. Answer Question 1 on the exam paper. Answer Questions 2-4 on the yellow paper.
More informationCIS-331 Exam 2 Fall 2014 Total of 105 Points. Version 1
Version 1 1. (20 Points) Given the class A network address 119.0.0.0 will be divided into a maximum of 15,900 subnets. a. (5 Points) How many bits will be necessary to address the 15,900 subnets? b. (5
More informationUSER'S MANUAL Vol.2 (Extended)
LCD Projector CP-X880/CP-X885 USER'S MANUAL Vol.2 (Extended) Thank you for purchasing this projector. WARNING Please read the accompanying manual SAFETY INSTRUCTIONS and this USER'S MANUAL thoroughly to
More informationFLAT WIDE DISPLAY FWD-50PX1. PROTOCOL MANUAL (USER CONTROL ONLY) 1st Edition
FLAT WIDE DISPLAY PROTOCOL MANUAL (USER CONTROL ONLY) 1st Edition Table of Contents 1. Communication Parameter... 3 2. Pin Configuration... 3 3. Communication Data Format... 3 4. General Function... 5
More informationControlling the projector using a personal computer
DLP Projector XD221U/XD221U-ST Controlling the projector using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal. PC-controllable functions: Turning
More informationControlling the projector using a personal computer
1 2 3 4 5 6 7 8 DLP Projector HC3200 Controlling the projector using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal. PC-controllable functions:
More informationVCCI (VCCI) ENERGY STAR ENERGY STAR
VCCI (VCCI) B ENERGY STAR ENERGY STAR ENERGY STAR ... 1... 5... 5... 5... 6... 7... 8... 9... 10... 11... 13... 14... 22... 24... 25... 26... 27 /... 27... 27... 27 /... 27 A... 28... 28... 29... 29...
More informationControlling the projector using a personal computer
LCD Projector HC6500 Controlling the projector using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal. PC-controllable functions: Turning the
More informationSIM2 Multimedia SIRIO. Rev. 1.0 (02 April 2014) SIRIO RS 232 Control
SIM2 Multimedia Rev. 1.0 (02 April 2014) 1 Contents Contents 2 1. Introduction 3 1.1. Setting up the RS 232C Serial connection.......................................................3 1.2. Execution of
More informationPortable LCD Projector. Models 9135 USER'S MANUAL
Portable LCD Projector Models 9135 USER'S MANUAL 401-9135-00 INTER M1-D INPUT LENS SHIFT FOCUS ZOOM COMPONENT TEMP LAMP Projector 9135 User's Manual - Operating Guide Thank you for purchasing this projector.
More informationControlling the projector using a personal computer
LCD Projector FL7000U Controlling the projector using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal. PC-controllable functions: Turning the
More informationD-ILA PROJECTOR RS-232C CONTROL SPECIFICATIONS. Victor Company of Japan, Limited. * D-ILA is a trademark of Victor Company of Japan, Limited.
D-ILA TM PROJECTOR DLA-G3010series DLA-M2000series RS-232C CONTROL SPECIFICATIONS Victor Company of Japan, Limited * D-ILA is a trademark of Victor Company of Japan, Limited. Document Number CTGKE-0013
More informationC3X1080 RS-232C CONTROL SPECIFICATIONS
SIM2 Multimedia C3X1080 RS-232C CONTROL SPECIFICATIONS Rev. 1.1 (30 January 2008) Contents Contents 2 1 Introduction 3 1.1 Setting up the RS-232C Serial connection........................... 3 1.2 Execution
More informationControlling the projector using a personal computer
DLP Projector XD3500U Controlling the projector using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal. PC-controllable functions: Turning the
More informationCIS-331 Exam 2 Spring 2016 Total of 110 Points Version 1
Version 1 1. (20 Points) Given the class A network address 121.0.0.0 will be divided into multiple subnets. a. (5 Points) How many bits will be necessary to address 8,100 subnets? b. (5 Points) What is
More informationControlling the projector using a personal computer
MODEL UD740U Controlling the projector using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal. PC-controllable functions: Turning the power ON
More information470, 475W, 480 and 485W
PowerLite 470, 475W, 480 and 485W Ultra-short-throw projectors with comprehensive connectivity and premium audio. Ultra-short throw distance Larger-than-life standard and widescreen images Future-ready
More informationC1098 JPEG Module User Manual
C1098 JPEG Module User Manual General Description C1098 is VGA camera module performs as a JPEG compressed still camera that can be attached to a wireless or PDA host. Users can send out a snapshot command
More informationVP4001. RS-232C Control Specification
RS-232C Control Specification : Rev 00 VP4001 RS-232C Control Specification Categy : Video Project Document Version : 1.0 Auth(s) : Marantz America, Inc. Date : 2006/10/07 Number of Page : 15 Marantz America,
More informationX15i. Multimedia Projector Operator's Guide. About this manual. Thank you for purchasing this projector.
X15i Multimedia Projector Operator's Guide Thank you for purchasing this projector. WARNING Before using, read the "Product Safety Guide" and these manuals to ensure correct usage through understanding.
More informationCIS-331 Final Exam Spring 2015 Total of 115 Points. Version 1
Version 1 1. (25 Points) Given that a frame is formatted as follows: And given that a datagram is formatted as follows: And given that a TCP segment is formatted as follows: Assuming no options are present
More informationCIS-331 Final Exam Spring 2018 Total of 120 Points. Version 1
Version 1 Instructions 1. Write your name and version number on the top of the yellow paper and the routing tables sheet. 2. Answer Question 2 on the routing tables sheet. 3. Answer Questions 1, 3, 4,
More informationPG-D3550W PG-D3050W PG-D2870W SETUP MANUAL DATA PROJECTOR MODEL
DATA PROJECTOR MODEL PG-D3550W PG-D3050W PG-D2870W SETUP MANUAL Connecting Pin Assignments... 2 RS-232C Specifications and Commands... 4 Operating the Projector Using the PJLink TM Protocol... 10 Setting
More information4. Specifications and Additional Information
4. Specifications and Additional Information AGX52004-1.0 8B/10B Code This section provides information about the data and control codes for Arria GX devices. Code Notation The 8B/10B data and control
More informationSIM2 Multimedia. M.150 RS-232 Control. Rev. 1.0 (20 January 2012)
SIM2 Multimedia M.150 RS-232 Control Rev. 1.0 (20 January 2012) Contents Contents 2 1 Introduction 3 1.1 Setting up the RS-232C Serial connection........................... 3 1.2 Execution of the command...................................
More informationSIM2 C3XLUMIS HOST RS-232C and TCP/IP Control Specifications
SIM2 Multimedia SIM2 C3XLUMIS HOST RS-232C and TCP/IP Control Specifications Rev. 1.0 (20 January 2009) Contents Contents 2 1 Introduction 3 1.1 Setting up the RS-232C Serial connection...........................
More informationAPPENDIX B: MANUFACTURER SPECIFICATIONS
APPENDIX B: MANUFACTURER SPECIFICATIONS Lenovo N22: Intel Celeron N3050 Dual-Core 1.60GHz, 4GB DDR3 SDRAM, 16GB emmc, 11.6" HD TN Anti-glare Display, Integrated HD Graphics, Webcam, 802.11ac, Bluetooth,
More informationSALE on Projector Bulbs at take additional 5% Off with coupon code 5PDF
Projector CP-X444/CP-X440 User's Manual Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read the "User's Manual - Safety Guide" and related manuals to
More informationControlling the projector using a personal computer
LCD Projector WL2650U Controlling the projector using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal. PC-controllable functions: Turning the
More informationCP-S210/CP-S210T/CP-S210F
Projector CP-S20/CP-S20T/CP-S20F CP-S20W/CP-S20WT/CP-S20WF User's Manual - Operating Guide Thank you for purchasing this projector. WARNING Before using, read the "User's Manual - Safety Guide" and these
More information====================================================================== Control Commands for LV series Rev1.0.4
====================================================================== Control Commands for LV series Rev1.0.4 Copyright (C) NEC Display Solutions, Ltd. 2006-2010 ----- Updated on January 25, 2010 -----
More informationSIM2 C3X LUMIS UNO RS-232C Control Specifications
SIM2 Multimedia SIM2 C3X LUMIS UNO RS-232C Control Specifications Rev. 1.0 (19 March 2010) Contents Contents 2 1 Introduction 3 1.1 Setting up the RS-232C Serial connection........................... 3
More informationVS250 SVGA 3LCD Projector
Seite von 5 NEW VS250 SVGA 3LCD Projector Contact Us 800.463.7766 Mon-Fri 6am-8pm, Sat 7am-4pm PT Portable projector with HDMI for everyday business presentations. Make a lasting impression with the VS250
More informationGeneric RS232 protocol
Generic RS232 protocol Table of content 1 Introduction... 2 2 Description... 2 2.1 Hardware specification... 2 2.2 Communication Setting... 2 2.3 Command Message Reference... 3 3 Protocol 1 : with ID...
More informationXG-SV100W XG-SV200X SETUP MANUAL DATA PROJECTOR MODEL
DATA PROJECTOR MODEL XG-SV100W XG-SV200X SETUP MANUAL Connecting Pin Assignments... 2 RS-232C Specifications and Commands... 4 Operating the Projector Using the PJLink TM Protocol... 10 Setting up the
More informationLV-S4 SERIAL FUNCTIONAL SPECIFICATION
LV-S4 SERIAL FUNCTIONAL SPECIFICATION History of Modification Rev. Contents Date Note New Document 2005.03.01 SERIAL FUNCTIONAL SPECIFICATION Page 1 of 18 - CONTENT - 1. Overview... 3 2. Interface Specification...
More informationControlling the projector via RS-232C connection. Contents. 1. Introduction Connection Interface... 2
MODEL TX10U/TW11U Controlling the projector via RS-232C connection Contents 1. Introduction... 2 1.1 Connection... 2 1.2 Interface... 2 1.2.1 Pin assignment of SERIAL terminal (D-SUB 9-pin)... 2 1.2.2
More informationCP-S335/X340/X345. User's Manual Operating Guide. About this manual. Projector
Projector CP-S335/X340/X345 User's Manual Operating Guide ENGLISH Thank you for purchasing this projector. WARNING Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct
More informationContents. 1. Introduction Connection Interface...2
DLP TM Projector NW31U-EST/NW30U Controlling the projector via RS-232C connection Contents 1. Introduction...2 1.1 Connection...2 1.2 Interface...2 1.2.1 Pin assignment of SERIAL terminal (D-SUB 9-pin)...
More informationControlling the projector using a personal computer
AUDIO OUT AUDIO IN-1 AUDIO IN-2 AUDIO IN-3L AUDIO IN-3R S-VIDEO VIDEO SERIAL MONITOR OUT COMPUTER / COMPONENT VIDEO IN-1 IN-2 USB-B USB-A DLP TM MODEL Projector XD550U/XD560U/WD570U/XD360U-EST/WD380U-EST/XD365U-EST/WD385U-EST
More informationPowerLite. 420, 425W, 430 and 435W. Affordable short-throw projectors with premium audio and connectivity. Giant standard and widescreen images
PowerLite 420, 425W, 430 and 435W Affordable short-throw projectors with premium audio and connectivity. Giant standard and widescreen images Bright, colorful images Future-ready connectivity Spectacular
More informationZN-DN312XE-M Quick User Guide
ZN-DN312XE-M Quick User Guide This manual provides instructions for quick installation and basic configuration of your IP device. Step1. Connect cables to IP device Connect required cables to the device
More informationKRAMER ELECTRONICS LTD. USER MANUAL MODEL: VA-8xl 8-Channel Balanced Stereo Audio Amplifier. P/N: Rev 1
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: VA-8xl 8-Channel Balanced Stereo Audio Amplifier P/N: 2900-300151 Rev 1 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 3
More informationWOLF VISION GmbH, Oberes Ried, A-6833 Klaus/Austria, Tel.: ++43 / (0) 5523 / , Serial Protocol of
TECHNICAL INFORMATION WOLF VISION GmbH, Oberes Ried, A-6833 Klaus/Austria, Tel.: ++43 / (0) 5523 / 52250-0, E-mail: wolfvision@wolfvision.com Serial Protocol of VZ-9 and VZ-9plus Revised 19 th November
More information1-chip DLP Laser Projector with High Brightness LX-MH502Z
1-chip DLP Laser Projector with High Brightness LX-MH502Z Product Outline The LX-MH502Z is a compact and lightweight 4K UHD DLP laser projector capable of projecting high-resolution 4K images, making it
More informationProjector Control Command Reference Manual
Projector Control Reference Manual NEC Display Solutions, Ltd. 2014-2017 BDT140013 Revision 6.1 Introduction This manual describes the commands used to control an NEC-made projector from a PC or other
More informationPJ1165. User Guide. Guide de l utilisateur. Bedienungsanleitung. Guía del usuario. Guida dell'utente. Användarhandbok. Käyttöopas
PJ1165 User Guide Guide de l utilisateur Bedienungsanleitung Guía del usuario Guida dell'utente Användarhandbok Käyttöopas Contents For Your Records...2 Projector Features...3 Preparation...3 Part Names...4
More informationPlease read this user's manual thoroughly to ensure correct usage through understanding.
Liquid Crystal Projector CP-X880/CP-X885 (CP-X880W/CP-X885W) USER'S MANUAL Vol. Basic Please read this user's manual thoroughly to ensure correct usage through understanding. BEDIENUNGSANLEITUNG Teil Grundlagen
More informationCIS-331 Final Exam Spring 2016 Total of 120 Points. Version 1
Version 1 1. (25 Points) Given that a frame is formatted as follows: And given that a datagram is formatted as follows: And given that a TCP segment is formatted as follows: Assuming no options are present
More informationPortable LCD Projector Model 8755G
Portable LCD Projector Model 8755G 8912 8913 USER S MANUAL #070017 Projector 8755G/8912/8913 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this
More informationSC-HDMI-2A Available Output Resolutions & Supported Input Resolutions
1163 Warner Ave Tustin, CA 92780 (714) 641-6607 www.hallresearch.com 2015-03-27 SC-HDMI-2A Available Output Resolutions & Supported Input Resolutions 1.0 Output Resolutions Since the device is a scaler
More informationSMART Board Interactive Whiteboard System
PLEASE THINK BEFORE YOU PRINT Specifications SMART Board Interactive Whiteboard System Model 660i3 Physical Specifications UF55 Projector System Total Size Remote Control Extended Control Panel Weight
More informationGateway Ascii Command Protocol
Gateway Ascii Command Protocol Table Of Contents Introduction....2 Ascii Commands.....3 Messages Received From The Gateway....3 Button Down Message.....3 Button Up Message....3 Button Maintain Message....4
More information6.1 Font Types. Font Types
6 Font This chapter explains basic features of GP-Pro EX's "Font" and basic ways of placing text with each font. Please start by reading "6.1 Font Types" (page 6-2) and then turn to the corresponding page.
More informationProgramming Notes and Examples
LCD/USB Companion Chip Document Number: X37A-G-003-05 Copyright 2001, 2002 Epson Research and Development, Inc. All Rights Reserved. Information in this document is subject to change without notice. You
More informationEvery model delivers high image quality. The VPL-CW276 offers 5,200 lumens* brightness and provides high image quality with WXGA resolution.
VPL-CW276 5,100 lumens WXGA installation projector Overview Extremely bright, high resolution images, with simple set-up and low running costs for schools or meeting rooms The VPL-CW276 offers installation
More information2600 lumen brightness with native WXGA (1280 x 800) 16:10 widescreen screen resolution.
VPL-SW620 2,600 lumens WXGA Ultra Short Throw projector Overview Bright, high contrast widescreen projector with easy installation, environmentally friendly features ideal for mid size rooms, with optional
More informationCPX275W USER'S MANUAL
Liquid Crystal Projector CPX275W USER'S MANUAL Please read this user's manual thoroughly to ensure correct usage through understanding. BEDIENUNGSANLEITUNG Bitte lessen Sie diese Bedienungsanleitung zugunsten
More informationPJ1165. Launch Kit. Quick Specs 1024 x 768 XGA Resolution Brightness: 3500lm Contrast Ration: 800:1 Weight: 7.7kg
LCD LCD TV CRT Projector Wireless For those in the know Quick Specs 1024 x 768 XGA Resolution Brightness: 3500lm Contrast Ration: 800:1 Weight: 7.7kg Product Information UPC Code: 766907 03761 6 Serial
More informationVZ-C12, VZ-C12², VZ-C12³, VZ-C32 and VZ-C32
TECHNICAL INFORMATION WOLF VISION GmbH, Oberes Ried, A-6833 Klaus/Austria, Tel.: ++43 / (0) 5523 / 52250-0, E-mail: wolfvision@wolfvision.com Serial Protocol of VZ-C12, VZ-C12², VZ-C12³, VZ-C32 and VZ-C32
More informationVPL-DX271. Product Image. 3,600 lumens XGA desktop projector. Overview
VPL-DX271 3,600 lumens XGA desktop projector Product Image Overview Bright, efficient, easy-to-use projector for classrooms and meeting rooms: with excellent picture quality and low ownership costs. The
More informationLWU701i/LW751i/LX801i/LWU601i/LW651i User's Manual (detailed) Operating Guide
User's Manual (detailed) Operating Guide Projector LWU701i/LW751i/LX801i LWU601i/LW651i User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Safety Guide WARNING CAUTION
More informationPROJECTOR MODEL SETUP MANUAL
PROJECTOR MODEL XV-Z30000 SETUP MANUAL Connecting Pin Assignments... 2 RS-232C Specifications and Commands... 4 Setting up the Projector Network Environment... 8. Connecting the Projector to a Computer...
More informationCIS-331 Final Exam Fall 2015 Total of 120 Points. Version 1
Version 1 1. (25 Points) Given that a frame is formatted as follows: And given that a datagram is formatted as follows: And given that a TCP segment is formatted as follows: Assuming no options are present
More informationThe cache is 4-way set associative, with 4-byte blocks, and 16 total lines
Sample Problem 1 Assume the following memory setup: Virtual addresses are 20 bits wide Physical addresses are 15 bits wide The page size if 1KB (2 10 bytes) The TLB is 2-way set associative, with 8 total
More informationCP-EX252N/CP-EX302N/CP-EW302N
LCD Projector CP-EX252N/CP-EX302N/CP-EW302N User's Manual (detailed) Network Guide Thank you for purchasing this product. This manual is intended to explain only the network function. For proper use of
More information