Section 1. Schedule 80 PVC Piping System. Pipe and Fittings Sizes ¼" to 16"
|
|
|
- Adela Mosley
- 5 years ago
- Views:
Transcription
1 Section Schedule 80 PVC Piping System Pipe and Fittings s ¼" to 6" Effective September 27, 200
2 Glossary FP = Female Pipe hread MP = Male Pipe hread S = apered Socket SPG = Spigot End (same dimension as pipe outside diameter) * = Non-Returnable / Non-cancellable ^ = 40% Restocking Fee HS = High Strength S = Streamline BUSH = Assembled Fitting from Molded Components FAB = Fabricated Fitting Product ine Description Discount 46 PVC Pressure Pipe - 20 ft. engths Plain End 48 PVC Pressure Pipe - 20 ft. engths Bell End 08 PVC Pressure Fittings - Molded 4 PVC Pressure Expansion Joint PVC Pressure Metal Insert Fittings 02 PVC Pressure D Fittings - Molded 05 PVC Pressure D Fittings - Fabricated he technical information given in this publication implies no warranty of any kind and is subject to change without notice. Please consult our erms and Conditions of Sale. For complete technical information, please consult the GF Piping Systems echnical Manual available online at or by calling (800) For more information about any of our product lines, please call (800)
3 Schedule 80 PVC Page Schedule 80 PVC Pressure Pipe.5 Schedule 80 PVC Pressure Fittings.6 Schedule 80 PVC Metal ransition Fittings.24 Schedule 80 PVC Expansion Joints.26.
4 Specifications, Standards and olerances Specifications and Standards NSF/ANSI Standard 4 NSF/ANSI Standard 6 ASM D 784 : Material PVC ype I, Grade I Gray (cell classification 2454-B) ASM D 785 : PVC Schedule 80 Pipe ASM D 2467 : PVC Schedule 80 Socket & hreaded Fittings ASM D 2464 : PVC Schedule 80 hreaded Fittings ASM F 498 : PVC Schedule 80 aper hreads ASM D 2672 : PVC Schedule 80 apered Sockets for Bell End Pipe ASM F 970 : PVC Schedule 80 Unions ANSI B6.5 : Outside Diameter & Flange Bolt Hole Patterns ANSI B.20. : PVC Schedule 80 NP hreads CSA B7. : PVC Schedule 80 Pipe Molded Dimension olerances A Piston Position; Expansion Joints : ±0.0 D Outside Diameter : ± 0.06 G, G Intersections of centerlines to bottom of socket; 90 Ells, ees : up to 4" ±0.0; 6" and above ±0.06 GJ, GN Intersections of centerlines to bottom of socket; 45 Wyes : up to 4" ±0.0; 6" and above ±0.06 H, HJ, HN Intersections of centerlines to face of fitting; 90 Ells, 45 Ells, ees, 45 Wyes : up to 4" ±0.0; 6" and above ±0.06 H Socket Bottom to Face of Fitting : up to 4" ±0.0; 6" and above ±0.06 J Intersections of centerlines to bottom of socket; 45 & 0 Ells : up to 4" ±0.0; 6" and above ±0.06 Overall ength of fitting : ± 0.06 N Socket Bottom to Socket Bottom; Couplings, Unions : ± 0.06 N Socket Bottom to Face of Flange : ± 0.06 R hickness on Plugs, Flanges : ± 0.0, Effective hread ength : Reference Only W Height of Cap : ± 0.06 Fabricated Dimension olerances D Outside Diameter : ± 0.50 E Drive Pin Diameter : ± 0.50 G, G Intersections of centerlines to bottom of socket; 90 Ells, ees, Crosses : ± 0.25 GJ, GN Intersections of centerlines to bottom of socket; 45 Wyes : ± 0.25 H, HJ, HN Intersections of centerlines to face of fitting; 90 Ells, 45 Ells, ees, 45 Wyes, rue Wyes : ± 0.50 H Socket Bottom to Face of Fitting : ± 0.25 J Intersections of centerlines to bottom of socket; ¼, 5, 0, 22½, 45 Ells, rue Wyes : ± 0.25 Overall ength of fitting : ± 0.50 N Socket Bottom to Socket Bottom; Couplings : ± 0.50 N Socket Bottom to Face of Flange : ± 0.50 R hickness on Plugs, Flanges : ± 0.25, Effective hread ength : Reference Only W Height of Cap : ±
5 Schedule 80 PVC Pressure Pipe PVC80-20 ft. lengths Plain End (P/ 46) Bell End (P/ 48) AB * BB * AB * BB * AB * BB * AB * BB * AB * BB * AB * BB * AB * BB * AB * BB * AB * BB * AB * BB * AB * BB * AB * BB * AB * BB * AB * BB * AB * BB * ift [ft] Average O.D. min. wall A-Socket Entrance (Belled Pipe) B-Socket Bottom (Belled Pipe) C-Min. (Belled Pipe) ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ±
6 Schedule 80 PVC Pressure Fittings ee (S x S x S) H G * HS * HS S S S S S S S S S S S S S N * FAB N * FAB.6
7 Reducing ee (S x S x S) HJ HN G G 4 x S x S x S 4 x S 2 x S 2 x S 2 x S 2 x S 2 x S 2 x S 2 x FB * BUSH 2 x S 2 2 x S x S 4 x FB * BUSH 4 x S 4 x S 6 x FB * BUSH 6 x FB * BUSH 6 x HS 8 x FB * BUSH 8 x S 0 x N * FAB 0 x N * FAB 0 x N * FAB 0 x N * FAB 0 x FB * BUSH 0 x N * FAB 0 x FB * BUSH 2 x N * FAB 2 x N * FAB 2 x N * FAB 2 x N * FAB 2 x N * FAB 2 x FB * BUSH 2 x N * FAB 2 x FB * BUSH 4 x N * FAB 4 x N * FAB 4 x N * FAB 4 x N * FAB 4 x N * FAB 4 x N * FAB 4 x N * FAB 6 x N * FAB 6 x N * FAB 6 x N * FAB 6 x N * FAB 6 x N * FAB 6 x N * FAB 6 x N * FAB 6 x N * FAB.7
8 ee (S x S x FP) HJ HN G HS HS HS HS HS ee (FP x FP x FP) H * HS * HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS 90 Ell (S x S) H G * HS * HS S S S S S S S S S S S S S N * FAB N * FAB.8
9 90 Ell (S x FP) HJ HN G HS HS HS HS HS HS HS 90 Ell (FP x FP) H * HS * HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS 45 Ell (S x S) H J * HS * HS S S S S S S S S S S S S S N * FAB N * FAB.9
10 45 Ell (FP x FP) H * HS * HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS Coupling (S x S) N * HS * HS S S S S S S S S S S S S S N * FAB N * FAB.0
11 Reducing Coupling (S x S) N 4 x HS x HS x HS 4 x HS 2 x FB * BUSH 2 x BUSH 2 x HS 2 x HS 2 x FB * BUSH 2 x FB * BUSH 2 x HS 2 x HS 2 x HS 2 2 x HS 2 2 x FB * BUSH x FB * BUSH x HS x FB * BUSH 4 x FB * BUSH 4 x HS 6 x HS 8 x FB * BUSH 8 x HS 0 x N * FAB 0 x N * FAB 0 x FB * BUSH 0 x N * FAB 0 x FB * BUSH 2 x N * FAB 2 x FB * BUSH 2 x N * FAB 2 x FB * BUSH 4 x N * FAB 4 x N * FAB 6 x N * FAB 6 x N * FAB Coupling (FP x FP) * HS * HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS.
12 Reducing Coupling (FP x FP) 8 x * HS 2 x * HS 2 x * HS 4 x ^ HS x ^ HS x ^ HS 4 x ^ HS 2 x ^ HS 2 x ^ HS Female Adapter (S x FP) H * HS * HS HS HS HS HS HS HS HS HS HS N * FAB N * FAB N * FAB N * FAB Male Adapter (S x MP) H S HS HS HS HS HS HS HS HS N * FAB N * FAB N * FAB N * FAB.2
13 Flush Style Reducer Bushing (SPG x S) H 2 x * FUSH 2 x * FUSH 4 x FUSH x FUSH x FUSH 4 x FUSH 4 x FUSH 4 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 2 x FUSH 2 2 x FUSH x FB * BUSH x FB * BUSH x FUSH x FUSH x FUSH 4 x FUSH 4 x FUSH 6 x FUSH 6 x FUSH 8 x FUSH 0 x FB * BUSH 0 x N * FAB 0 x FUSH 0 x FUSH 2 x FB * BUSH 2 x N * FAB 2 x FUSH 2 x FUSH 4 x N * FAB 4 x N * FAB 4 x N * FAB 4 x N * FAB 4 x N * FAB 6 x N * FAB 6 x N * FAB 6 x N * FAB 6 x N * FAB 6 x N * FAB 6 x N * FAB.
14 Flush Style Reducer Bushing (SPG x FP) 8 x E * Extended 2 x * FUSH 2 x * FUSH 4 x * FUSH 4 x FUSH x FUSH x FUSH 4 x FUSH 4 x FUSH 4 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 x FUSH 2 2 x FUSH 2 2 x FUSH x FUSH x FUSH 4 x FUSH 4 x FUSH Flush Style Reducer Bushing (MP x FP) Style 8 x * FUSH 2 x * FUSH 2 x * FUSH 4 x * FUSH 4 x * FUSH 4 x ^ FUSH x ^ FUSH x ^ FUSH x ^ FUSH 4 x ^ FUSH 4 x ^ FUSH 4 x ^ FUSH 2 x ^ FUSH 2 x ^ FUSH 2 x ^ FUSH 2 x ^ FUSH 2 x ^ FUSH 2 x ^ FUSH 2 x ^ FUSH 2 x ^ FUSH x ^ FUSH 4 x ^ FUSH 4 x ^ FUSH.4
15 Cap (S) W * HS * HS HS HS HS HS HS HS HS HS HS HS S S S N * 5.75 FAB N * 7.50 FAB Cap (FP) W * HS * HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ HS ^ 5..0 HS Plug (SPG) R
16 Plug (MP) R * * H * H * H * H * Flange - One Piece (S) 50 7ºF ( ºC) HC = Honeycomb (Front) WEB = Webbed (Back) # holes Bolt Dia. bolt cir. dia. D N R SOID SOID HC HC HC HC HC WEB WEB HC HC.6
17 Flange - One Piece (FP) 50 7ºF ( ºC) HC = Honeycomb (Front) WEB = Webbed (Back) # holes Bolt Dia. bolt cir. dia. D R ^ SOID ^ SOID ^ HC ^ HC ^ HC ^ HC ^ HC ^ WEB ^ WEB Flange (Blind) 50 7ºF ( ºC) HC = Honeycomb (Front) # holes Bolt Dia. bolt cir. dia. D R HC HC HC HC HC HC HC HC HC HC HC N * SOID N * SOID N * SOID N * SOID.7
18 Flange - Van Stone (S) " - 2" Have CPVC Ring 50 7ºF ( ºC) 4" & 6" 00 7 F ( C HC = Honeycomb (Front) # holes Bolt Dia. bolt cir. dia. D N R HC HC HC HC HC HC HC HC HC HC HC HC HC N * FAB N * FAB Flange - Van Stone (FP) " - 2" Have CPVC Ring 50 7ºF ( ºC) HC = Honeycomb (Front) # holes Bolt Dia. bolt cir. dia. D R ^ HC ^ HC ^ HC ^ HC ^ HC ^ HC ^ HC ^ HC ^ HC.8
19 Flange - Van Stone (SPG) " - 2" Have CPVC Ring 50 7ºF ( ºC) HC = Honeycomb (Front) # holes Bolt Dia. bolt cir. dia. D R HC HC HC HC HC HC HC HC HC HC HC HC HC.9
20 Nipple (MP x MP) table continued next page.20 /2 x C * 50. /2 x * /2 x * /2 x * /2 x * /2 x * /2 x * /2 x * /2 x * /4 x C * 25.8 /4 x * /4 x * /4 x * /4 x * /4 x * /4 x * /4 x * /4 x * x C * x * x * x * x * x * x * x * x * /4 x C * 25.6 /4 x * /4 x * /4 x * /4 x * /4 x * /4 x * /4 x * /4 x * /2 x C * /2 x * /2 x * /2 x * /2 x * /2 x * /2 x * /2 x * /2 x * x C * x 2 / * x * x * x * x * x * x * x * /2 x C * /2 x * /2 x * /2 x *
21 2 /2 x * /2 x * /2 x * /2 x * x C * x * 5.00 x * x * x * x * x * x * x C * x * x * x * x * x * x * Wye (S x S x S) -/2" - 2" F ( C) " - 6" F ( C) 8" & arger F ( C) GJ GN H HJ N * S S S S HS * S N * FAB N * FAB N * FAB N * FAB Reducing 45 Wye (S x S x S) 2" F ( C) " - 6" F ( C) 8" F ( C) GJ GN H HJ N 2 x FB * BUSH x FB * BUSH x FB * BUSH 4 x FB * BUSH 4 x FB * BUSH 6 x FB * BUSH 6 x HS 8 x FB * BUSH 8 x FB * BUSH.2
22 Union ype 75 (S x S) --Available Q ºF ( ºC) P/ EPDM FPM Pack N Union ype 75 (FP X FP) --Available Q ºF ( ºC) P/ EPDM FPM Pack
23 Union (S x S) **o be DISCONINUED in 202** 50 7ºF ( ºC) P/ EPDM FPM Pack N * * * * * * * * * * * * * * * * * * * * Union (FP X FP) **o be DISCONINUED in 202** 50 7ºF ( ºC) P/ EPDM FPM Pack * * * * * * * * * * * * * * * * * * * *
24 Schedule 80 PVC Metal ransition Fittings PVC-to-Brass ransition Fittings (SPG x FP) 50 7ºF ( ºC) H W BR BR BR BR BR BR PVC-to-6 SS ransition Fittings (SPG x FP) 50 7ºF ( ºC) H W SS SS SS SS SS SS
25 Metal Union End Connectors ype 75 (6 SS) --Available Q ºF ( ºC) Union Sold Separately * * * * * * Metal Union End Connectors (6 SS) **o be DISCONINUED in 202** 50 7ºF ( ºC) Union Sold Separately * * * * * *.25
26 Schedule 80 PVC Expansion Joints Expansion Joint 6" ravel (S x S) o order SxSPG add "P" to end of part number. o order FxF add "F" to end of part number. P/ EPDM FPM A D N X6 * X6 * X6 * X6 * X6 * 86-00X6 * X6 * 86-02X6 * X6 * 86-05X6 * X6 * X6 * X6 * 86-00X6 * X6 * X6 * X6 * X6 * Expansion Joint 2" ravel (S x S) o order SxSPG add "P" to end of part number. o order FxF add "F" to end of part number. P/ EPDM FPM A D N X2 * X2 * X2 * X2 * X2 * 86-00X2 * X2 * 86-02X2 * X2 * 86-05X2 * X2 * X2 * X2 * 86-00X2 * X2 * X2 * X2 * X2 *
27 GF Piping Systems PVC Pressure Piping System Specification Submittal Data Sheet Schedule 80 Pipe and Fittings Pipe Pipe will be manufactured to the dimensions and tolerances of ASM D785. Belled end pipe bells shall be manufactured to the dimensions and tolerances of ASM D2672. he PVC material shall be ype I, Grade I with a cell classification of 2454 and conform to ASM D784. he pipe will conform to NSF 4 & 6, CSA B7., and UPC standards. q q PVC Sch.80 ype I, Group I Plain End Pipe - 20 ft. engths PVC Sch.80 ype I, Group I Belled End Pipe - 20 ft. engths Fittings Socket type molded fittings will be manufactured to the dimensions and tolerances of ASM D2467. hreaded type (NP) molded fittings will be manufactured to the dimensions and tolerances of ASM D2464 and meet the requirements of ANSI/ ASME B.20.. Flanges shall meet the O.D. and bolt hole patterns as specified in ANSI/ASME B 6.5. he PVC material shall be ype I, Grade I with a cell classification of 2454 and conform to ASM D784. he fittings will conform to NSF 4 & 6, and UPC standards. q q q PVC Sch.80 ype I, Grade I Socket ype PVC Sch.80 ype I, Grade I hreaded ype PVC Sch.80 ype I, Grade I Flange ype Job Name: Job ocation: Engineer: Contractor: Representative:.27
Schedule 80 PVC. Vinyl Piping Systems
Schedule 80 PVC Vinyl Piping Systems Section Schedule 80 PVC Piping System Pipe and Fittings s 8" to 24" Glossary FPT = Female Pipe Thread MPT = Male Pipe Thread S = Tapered Socket SPG = Spigot End (same
PVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS
29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall
SOCKET & THREADED FITTINGS
PVC SCHEDULE 80 FITTINGS CH-PVC-0617 Effective June 26, 2017 Supercedes CH-PVC-0315 of March 30, 2015 SOCKET & THREADED FITTINGS Suggested List Prices Subject to Change Without Notice Visit our website
SOCKET & THREADED FITTINGS
PVC SCHEDULE 80 FITTINGS CH-PVC-1018 Effective October 1, 2018 Supercedes CH-PVC-0617 of June 26, 2017 SOCKET & THREADED FITTINGS Suggested List Prices Subject to Change Without Notice Visit our website
CH-PVC-0315 PVC SCHEDULE 80 FITTINGS. Effective March 30, 2015 Supercedes CH-PVC-0812 of August 27, coupling - threaded
PVC SCHEDULE 80 FITTINGS CH-PVC-0315 Effective March 30, 2015 Supercedes CH-PVC-0812 of August 27, 2012 socket & Threaded fittings Suggested List Prices Subject to Change Without Notice Visit our website
SCHEDULE 80 PVC. List Prices
SCHEDULE 80 PVC List Prices Effective: May 28, 2001 Revised June 2003 Why LASCO Recommends Sealant in Threaded Joints Teflon tape, when compressed between male and female threads in PVC fittings joints,
CH-PVDF RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS. Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov.
RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS CH-PVDF-1115 Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov. 25, 2013 Suggested list prices subject to change without notice. UPC
SOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE
POLYPROPYLENE SCHEDULE 80 PIPE, VALVES & FITTINGS BLACK AND CHEM-PURE NATURAL CH-PP-1018 Effective Oct. 01, 2018 Supercedes CH-PP-0118 dated Jan. 01, 2018 Suggested list prices subject to change without
PVC PRESSURE SYSTEMS. Fittings / Pipes
D PVC PRESSURE SYSTEMS Fittings / Pipes PRESSURE FITTINGS BENDS 15mm x 45 801-15-45 15mm x 90 801-15-90 20mm x 45 801-20-45 20mm x 90 801-20-90 25mm x 45 801-25-45 25mm x 90 801-25-90 32mm x 45 801-32-45
PVC DWV Drain Waste Vent Fittings
DWV Standards PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Contact Spears for any information not found. Page 983 Suitable for low pressure air handling 5 psi, not for distribution of compressed
PVC SOLVENT WELD DRAIN WASTE & VENT
PVC-17R PAGE 1 november 007 COUPLING (Hub x Hub) 0 110 11 11 11 1171 1 1/ 0 7 00 00 0 10.9.79 1.0.. 1. REDUCER BUSHING (Spigot x Hub) Style 17 x TRAP ADAPTER (Spigot x Slip Joint ) 1 19.71 REDUCER COUPLING
SCHEDULE 80 CPVC. List Prices
SCHEDULE 80 CPVC List Prices Effective: September 26, 2010 Why LASCO Recommends Sealant in Threaded Joints Teflon tape, when compressed between male and female threads in CPVC fittings joints, can cause
Spears FlameGuard CPVC SDR 13.5 Pipe and Schedule 40 and 80 fittings
Plastic Pipe and Fittings Plastic pipe and fittings are FM Approved for aboveground wet pipe fire protection systems for Light Hazard Occupancy sprinkler systems only. Except where noted otherwise, all
DR-18 Gasketed C900 & C907 Fittings ENGINEERED FOR DURABILITY
LIST PC920180410 HARCO LIST ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version of this price list LIST PC920180410 HARCO LIST
Copper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Jan. 23, 2017 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 21.04 25 3000 HL15-105-0001 1/8 1/4 x 1/8
Copper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Feb. 9, 2015 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 19.36 25 3000 HL15-105-0001 1/8 1/4 x 1/8
PVC DWV Drain Waste Vent Fittings
PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Visit our web site www.spearsmfg.com 1212 SPEARS IE OF QUAITY PVC DRAI, WASTE AD VET (DWV) FITTIS ARE MAUFACTURED I STRICT COMPIACE TO ASTM D 2665. STADARDS
Third Party Tested. Sam Roberts & Associates, Inc.
Perfect Fit Solvent Weld DWV Fittings Injection Molded in Sizes 4 12 Fabricated in Sizes 10 24 D Applications The most complex installations require the most advanced fittings. Injection molded Perfect
PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CATALOG EFFECTIVE
PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CTLOG EFFECTIVE 4-15-13 SUPERDUCT PVC DUCT PIPE Part No. Size O.D. Wall Std. Length List Price Per Ft. List Price Per Ft. Extruded 10 ft. 20 ft. 1033-PP-02
Harrison Machine & Plastic Corporation HARRISON SUPERDUCT FUME EXHAUST SYSTEMS PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CATALOG
Harrison Machine & Plastic Corporation HRRISON SUPERDUCT FUME EXHUST SYSTEMS PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CTLOG EFFECTIVE 01-01-2018 1 HRRISON SUPERDUCT PVC DUCT PIPE Part No. Size O.D.
SCHEDULE 40 PVC. List Prices
SCHEDULE 40 PVC List Prices Effective: November 14, 2005 Tee 401-003 3/8 100 1.99 401-005 0.64 401-007 0.73 401-010 1 50 1.38 401-012 1 1 /4 25 2.15 401-015 1 1 /2 25 2.61 401-020 2 25 3.80 401-025 2 1
Standard Fittings. Fig. List Incremental UPC Bag Box No. Size Price Order Qty Weight Qty. Qty.
BLZM-0414 Effective April 28, 2014 Supercedes BLZM-0413R of April 22, 2013 Standard Fittings Prices and MTO status subject to change without notice Visit our website for the most current information ADAPTERS
Standard Fittings. Fig. List Incremental UPC Bag Box No. Size Price Order Qty Weight Qty. Qty.
BLZM-0717 Effective July 31, 2017 Supercedes BLZM-0414 of April 28, 2014 Standard Fittings Prices and MTO status subject to change without notice Visit our website for the most current information ADAPTERS
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe SERIES Features Pressure rated 232 PSI (16 Bar) at 73 F (23 C) Full Port design for unrestricted flow Energized PTFE ball
Sincerely, Your Partners at Specified Fittings
N E S E S Washington Location 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 59870-6363 406-777-3466 406-777-7181
Type Electrically Actuated 3-way Ball Valves
GF Piping Systems Electrically Actuated 3-way Ball Valves Type 167-17 General Size: ⅜ 2 aterial: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPD, FP End Connection: Solvent
SCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
Sincerely, Your Partners at Specified Fittings
N W E S E S Washington Location 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 59870-6363 406-777-3466 406-777-7181
SCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
Air-Pro Blue Polyethylene (PE) Compressed Air Piping System
- Specification Blue Polyethylene (PE) Compressed Air Piping System REV:IN0512PE Materials: ASTM D3350 cell classification PE346544C or better. Resin shall comply with FDA Code of Federal Regulators (CFR),
Macon Plastics, Inc. Solvent Weld SCH 40/80 DWV
Catalog #210SDWV MP Macon Plastics, Inc. & DWV Fittings P R I C E L I S T Solvent Weld /80 DWV Effective Date: 02/02/15 Catalog : 210SDWV Revision: D Supercedes: 209SDWV Not sure if you have a current
ChemDrain. ChemDrain CPVC Chemical Waste Drain System DIMENSIONAL CATALOG. (Updated November 13, 2018) DC-CD
DMESOAL AALOG hemdrain hemdrain PV hemical Waste Drain System (Updated ovember 13, 2018) 2005-2018 harlotte Pipe and Foundry ompany D-D hemdrain PV hemical Waste Drain System Dimensions All products manufactured
Stainle ss Ste e l Fit tings
www.swagelok.com Stainle ss Ste e l Fit tings For the Sanitar y Industries Jensen Series Kwik-Clamp, tube butt weld, cme threaded and plain bevel-seat, and specialty end connections 0 and 6L stainless
Pressure. PVC Schedule 80 Pipe and Fittings. PVC Schedule 40 Pipe and Fittings. FlowGuard Gold CPVC CTS Pipe and Fittings. ReUze CPVC CTS Pipe
MNONA CAAOG PVC chedule 80 Pipe and Fittings Pressure PVC chedule 40 Pipe and Fittings FlowGuard Gold CPVC C Pipe and Fittings ReUze CPVC C Pipe (Updated July 8, 204) 200-204 Charlotte Pipe and Foundry
Duo-Pro Double Contained Piping Systems
PRO 150x150 Simultaneous Pipe Part Number 5210+(size code) (ft.) L2 (ft.) # Spider Clips 1 x 3 (134) 3.75 2.5 4 2 x 4 (420) 3.50 3.0 4 3 x 6 (531) 5.25 3.0 3 4 x 8 (583) 5.25 3.0 3 6 x 10 (627) 5.25 3.0
DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE OCTOBER 1, 2018 DWV-PVC 2 x FPT x MPT
Sam Roberts & Associates, Inc. South Texas 3300 Capitol Houston, Texas Fax:
Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3 12 Fabricated in Sizes 10 36 P Applications Plastic Trends has the broadest product offering of Solvent Weld Sewer fittings in the industry.
DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE JANUARY 2, 2019 DWV-PVC 2 x FPT x MPT
PVC Effective June 26, 2017 Supercedes PVC-0415 of April 13, Tee Reducing - slip x slip x slip (Cont.) Tee - slip x slip x slip
PVC SCHEDULE 40 PRESSURE FITTINGS PVC-0617 Effective June 26, 2017 Supercedes PVC-0415 of April 13, 2015 Suggested List Prices Subject to Change Without Notice Visit our website for the most current information
Fig. List Incremental UPC Packaging No. Size Price Order Qty* Box Skid
PVC Schedule 40 Pressure Fittings PVC-0812 Effective Aug. 27, 2012 Supercedes PVC-0611 dated June 27, 2011 Suggested List Prices Subject to Change Without Notice Visit our website for the most current
Model QRS CPVS
SPARE PARTS LIST EN CP COMPRESSOR Model QRS 0-5 - 0 CPVS 0-5 - 0 6 05 50 65 KEY - Door Panel: 655900 Lock - Door Panel: 005076 QRS 0 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? KIT
CPVC Hot and Cold Water System
CPVC Hot and Cold Water System CANADA CPVC-C0313 MARCH 2013 SUPERSEDES CPVC-C1112R NOV. 2012 TABLE OF CONTENTS CPVC PIPE PAGE CATEGORY FlowGuard Gold CPVC Copper Tube Size Pipe 3 C-23 FITTINGS FlowGuard
FILTER NAME CONSTRUCTION FEATURES APPLICATIONS ORDER CODE MEMBRANE Body: polycarbonate Filter: PTFE membrane
Filter Caps for Humidity and Dewpoint Transmitters with probe 12 mm (0.47 ) The right choice of appropriate filter cap is essential for best long term performance in the application. For assistance please
Series P. Solvent Weld Sewer Fittings SDR 35. Solvent Weld Sewer Fittings SDR 35 P Series
Solvent ITEM Weld INCHES NUMBER Sewer QTY Fittings QTY PRICE SDR ITEM 35 INCHES NUMBER QTY QTY PRICE Injection Molded in Sizes 3 12 Fabricated in Sizes 10 27 page 27 Phone: 586-781-2700 Toll Free: 1-800-232-5690
Pipe & Accessories SCHEDULE 80 PIPE & FITTINGS. 174 If You Don t See it, Just Ask! Who says Pipe Men Can t Jump? Schedule 80 PVC Nipples
SCHEDULE 80 PIPE & FITTINGS Schedule 80 PVC Nipples 125870 w" x Close 125873 w" x 1 w" 125875 w" x 2" 125880 w" x 3" 125885 w" x 4" 125887 w" x 5" 125890 w" x 6" 125895 w" x 8" 125900 w" x 10" 125905 w"
DWV - PVC. PVC Drain, Waste & Vent Fittings. Includes: DWV - PVC - through 8 HVAC. List Prices
Discount Codes 07 DWV-PVC through 8 22 VAC Corrected Pricing hi-lited in Yellow DWV - PVC PVC Drain, Waste & Vent Fittings Includes: DWV - PVC - through 8 VAC s Effective: July 1, 2014 x FPT KEY:...ub
Heavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4" 12" Fabricated in Sizes 15" 36"
eavy Wall Gasketed Sewer Fittings SDR Injection Molded in Sizes " " Fabricated in Sizes " " With a.% thicker wall than SDR and high impact retention ring, Royal Building Product s PVC eavy Wall Gasketed
SCHEDULE 80 UP VC INDUSTRIAL PIPE SYSTEMS VIADUX VERSION 2.0
SCHEDULE 80 UP VC INDUSTRIAL PIPE SYSTEMS VIADUX VERSION 2.0 SCHEDULE 80 UPVC SCHEDULE 80 UPVC INDUSTRIAL PIPE SYSTEMS INDUSTRIAL PIPE SYSTEMS CORROSION RESISTANT PRESSURE PIPE RESISTANT TO MOST ACIDS,
Water Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
![AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]](/thumbs/79/79067902.jpg "AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]")
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
Pressure. Schedule 80 Pipe and Fittings. PVC Schedule 40 Pipe and Fittings. FlowGuard Gold CPVC CTS Pipe and Fittings DIMENSIONAL CATALOG
DMNONAL CAALOG PVC and CPVC chedule 80 Pipe and Fittings Pressure PVC chedule 40 Pipe and Fittings FlowGuard Gold CPVC C Pipe and Fittings (Updated April 2009) 200-2009 Charlotte Pipe and Foundry Company
PREMIER PUMP & SUPPLY, INC. SCHEDULE 40 PVC PROVIDING YOU WITH THE VERY BEST SERVICE IN THE INDUSTRY! PAGE P - 1 MARCH
SCHEDULE 0 PVC D ESCRIPTION INCHES TEE ( SLIP X SLIP X SLIP ) 0-00 0-007 0-00 0-0 0-0 0-00 0-0 0-00 0-00 / / 90 ELL ( SLIP X SLIP ) 0-00 0-007 0-00 0-0 0-0 0-00 0-0 0-00 0-00 / / COUPLING ( SLIP ) 9-00
ADAPTERS. Fig. No. Packaging C $ C x 1 1 / Fig. No.
PVC DWV FITTINGS SUGGESTED LIST PRICES PDWV-0918 Effective September 4, 2018 Supercedes PDWV-0318 of March 19, 2018 Prices and MTO status subject to change without notice Visit our website for the most
PVC SOLVENT WELD SEWER & DRAIN FITTINGS
LIST U41-0418-IP PVC SOLVENT WELD SEWER & DRAIN FITTINGS APRIL 9, 2018 SUPERSEDES U41-1017-IP (OCTOBER 30, 2017) www.ipexna.com For products requiring bar coding, - 1 - www.ipexna.com LIST U41-0418-IP
SADDLES & SNAP-ON SADDLES
SADDES & SAP-O SADDES When Assembling Spears Saddles to PVC pipe, Spears anufacturing Company recommends Spears PVC-19 Solvent Cement and Spears Primer-68/Primer-70 or equivalent. Although good connections
T E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with
90 Elbows Long Radius
90 Elbows Long Radius DN O.D. Center SCH STD SCH XS SCH XXS SCH 10 SCH 20 SCH 30 SCH 40 SCH 60 SCH 80 SCH 100 SCH 120 SCH 160 Inch mm to End Thickness Weight Thickness Weight Thickness Weight Thickness
FULL COLOR TAB #7 MSE, MSR
FULL COLOR TAB #7 MSE, MSR 117 MS - How to Order FORCE MULTIPLYING CYLINDERS SERIES MS : MULTI-STAGE The TRD MSE and MSR Series are double acting, single rod end cylinders that multiply the force output
T E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable
T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow
Ø mm. SYSTEM KAN-therm. Steel. Traditional material in modern technology TECHNOLOGY OF SUCCESS ISO 9001
Ø 12-108 mm SYSTEM KAN-therm Steel Traditional material in modern technology TECHNOLOGY OF SUCCESS System KAN-therm Steel - assortment press carbon steel pipe, zinc coated - bar 6 m 12 1,2 * 620459.4 6/624
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/ tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
Round Water-resistant Connectors (M8) XS3
Round Water-resistant Connectors () XS Compact, Watertight, Round Connectors Water-resistive, compact connector meets IP67 requirements. Ideal for a wide variety of FA and OA applications. Using connectors
PE PIPE & FITTINGS LDPE PIPE
LDPE PIPE All LDPE pipe is made with 100% virgin material ECO LDPE is made with 100% re-grind virgin material Pipes rated at 4 bar at 20 0 C No 2 for years All LDPE pipe is made and tested in our own factory
PENTAIR CLEAN & CLEAR PLUS CARTRIDGE D-94
PENTAIR CLEAN & CLEAR PLUS CARTRIDGE D-94 SINCE 1998 PREVIOUSLY PAC FAB 1 2 3 KEY 4 4654-25 KEY 4 4654-69 KEY 8 4654-30 20 4 5 7 6 KEY 8 4654-74A KEY 9 4654-23 8 9 10 12 13 KEY 23 4601-4801 KEY 19 4650-14A
Thermocouple Technology, Inc.
Series E End Cap Series - Manufacturing Standard Valid only for Overall Length L maximum of 24" and/or one-piece construction barstock *NOTICE: TTEC provides a one piece construction machined barstock
DWV Systems. Submittal Data Sheet. Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: < STANDARDS >
Submittal Data Sheet Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date < STANDARDS > CSA B181.2 System 15 CAN/ULC S102.2 PVC is the most frequently specified
Features: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
WITH ROLLED STOP COUPLING REDUCER C X C C
Copperfit Industries Inc. 1280 E. 9th St. Pomona, CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM COPPER PRESSURE FITTINGS Effective Date: Jan 2018 Version: 2C201801 Spread
MIXERS, BASIN & SINK FITTINGS DELUXE RANGE
MIXERS, BASIN & SINK FITTINGS 1. C.P. PILLAR COCK SWAN NECK DELUXE... 1125/- EACH 2. C.P. PILLAR COCK SWAN NECK UNIVERSAL... 1170/- EACH 3. C.P. PILLAR COCK SWAN NECK J BEND... 1125/- EACH 4. C.P. SINK
STEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED
STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3
Product Bulletin BPS-100 Revision 2.1 November C l a m p P i p e C o n n e c t o r
Product Bulletin BPS-00 C l a m p P i p e C o n n e c t o r Table of Contents BlueSky Clamp Connector... Industrial Applications... Clamp Connector Description... How the Metal to Metal Seal Works... Design
Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
Designator. Forging SS 6L ASTM A182, ASME SA182
ace Seal ittings -42 ace Seal ittings Series O-ring ace Seal ittings eatures O-ring seal to provide perfect leak-tight service for working conditions from critical vacuum to high O-ring contained completely
ORDERS MUST BE PLACED BY ING
MIDLAND METAL MFG Fittings, Valves, Clamps & Accessories for Hose, Pipe and Tube ORDERS MUST BE PLACED BY EMAILING SPECIALS@MIDLANDMETAL.COM PVC DWV FITTINGS 2 WEEK LEAD TIME Use your Midland Metal multiplier
Rice PVC Water Well Casing Solutions for Water Well Drillers
Rice PVC Water Well Casing Solutions for Water Well Drillers We use PVC that is manufactured to strict quality, performance and dimension standards. Stocked in solid & slotted well screen. Specifications
standard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
NMB SPLICE-SLEEVES ORDER GUIDE
ORDER GUIDE SYSTEM PRE-GROUTING POST-GROUTING HORIZONTAL APPLICATION Operation Determine Number and Size of Sleeves location, consider UPSIZE for more tolerance. B. If rebars change size across the joint,
Parametric Piping Models. Naveed Anwar July 2003
Parametric Piping Models Naveed Anwar July 2003 The Idea Basic idea is to assign parametric objects to basic line or area objects in the SAP2000 model and then generate detailed mesh for each object, on-demand
BRASS BRASS FITTINGS 90 0 FEMALE ELBOW 90 0 FORGED FEMALE ELBOW 45 0 FEMALE ELBOW UNION TEE UNION FORGED TEE SAE# Approx. Wt. Lbs.
RSS FITTINGS RSS 90 0 FEMLE ELOW 2200P 3500 302 200 Part # Thread Size pprox. 28-001 1/8 0.55 0.56 0.09 28-002 1/4 0.78 0.68 0.13 28-003 3/8 0.84 0.81 0.16 28-004 1/2 1.09 1.00 0.34 28-005 3/4 1.16 1.25
SCH 5S/10S/40S/80S. Stainless Steel/Carbon Steel Butt-welding Fittings
Stainless Steel/arbon Steel Butt-welding Fittings SH 5S/10S/40S/80S Ranged from equal and reduced tees, 45 and 90 elbows, concentric and eccentric reducers, to stub ends and caps, DIE ERSTE supplies a
Index. Polypropylene Black Steel Stainless Steel. Brass All Threads Socketweld. Stainless Steel Polypropylene. Stainless Steel Polypropylene
Index Page Screwed Pipe Fittings Galvanised Polypropylene Black Steel Stainless Steel 1 3 5 9 Plumbing Products Plumbing - Brass Brass All Threads Socketweld 13 15 15 Tank Outlets Brass Stainless Steel
Small Circular Connector. JN1/JN2 Series. Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series CONNECTOR MB-0054-10 June 2012 Angle Plug [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
FLS F3.00 PADDLEWHEEL FLOW SENSOR APPLICATIONS MAIN FEATURES
FLS F3.00 PADDLEWHEEL FLOW SENSOR APPLICATIONS The simple and reliable paddlewheel flow sensor type F3.00 is designed for use with every kind of solid-free liquids. The sensor can measure flow from 0.15
Technical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
Price Book - Section F Pipe & Accessories
Effective Date March, 20 Price Book - SCI Coop-Let F.T. Part No. Size / Description List Price 2500 SCI Coop-Let F.T. /2" x "- /2 $8.20 2520 SCI Coop-Let F.T. /2" x 2"-2 /2 $8.20 250 SCI Coop-Let F.T.
ENGINEERED SOLUTIONS FOR HIGH PRESSURE CONTAINMENT. Wireloctm. dimensional data
ENGINEERED SOLUTIONS FOR HIGH PRESSURE CONTAINMENT Wireloctm dimensional data ENGINEERED SOLUTIONS CONTENTS THE NExT GENERATION 1 SEAL RINGS 2 butt weld HUbS 3 5 blinds 6 8 CLAMP SET 9 CROSS REFERENCE
Compression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
DWV Systems Submittal Data Sheet. Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: introduction
Submittal Data Sheet Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date < STANDARDS > System 15 CSA B181.2 System XFR CAN/ULC S102.2 introduction PVC is the
Connections Catalog WIDEST SIZE RANGE ALL ALLOYS VAST INVENTORY QUICK TURNAROUND CAPABILITY AVL APPROVAL
Connections Catalog WIDEST SIZE RANGE ALL ALLOYS VAST INVENTORY QUICK TURNAROUND CAPABILITY AVL APPROVAL CUSTOM SOLUTIONS GLOBAL AVAILABILITY BROAD PRODUCTION CAPABILITY FULL PRODUCT TESTING About AFGlobal
Round Water-resistant Connectors (M12) XS2
Round Water-resistant Connectors (M) XS Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant
060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
ContainTech Polypropylene Dimensional Data Expertise in Engineered Plastics Dated
ContainTech Dimensional Data Expertise in Engineered Plastics Dated 3-17-11 Table of Contents Cap... 23 Clean Out... 22 Combo Lateral ( Sanaitry Tee)... 16 Elbow: 90... 9 Elbow: 45... 10 End Seal... 3
334A. High Performance Butterfly Valves to suit API standard 150lb/300lb Rating. Double offset geometry. 50 to 600mm
High Performance Butterfly Valves to suit API standard lb/00lb Rating A Valve nominal size to 00mm Max.working pressure MPa Working temperature range 0 0 Cast steel Stainless steel.9 5. 9 FS Fire safe
Pipes and fittings. Drain,Waste & Vent (DWV)
K e y P l a s t i c s I n n o v a t i v e d e s i g n & e x c e p t i o n a l s e r v i c e Pipes and fittings Drain,Waste & Vent (DWV) DWV Pipes and Fittings Contents 3 Pipes 4 Plain, I.O & Access Bends
JOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
GEMO 1.1 SANITARY ASME
SANIARY ASME 09 Catalog able of Contents page 11 24 S-ine Fittings Introduction & Order Information Weld Fittings Introduction & Order Information Elbows 5009 A2CMP... 13 5010 A2KMP... 13 ees 5011 A7MP....
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application non-drip 2 Innovative Products for Demanding Applications Innovative Couplings for Fluid
Technical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,