Instruction Manual KH337E. DAB+ FM Radio

Transcription

1 Instruction Manual KH337E DAB+ FM Radio

2 Contents Safety Warnings...5 Unpacking...7 Product Overview...8 Front View...8 Rear View...8 Power Source...9 Battery Power...9 Battery Life (Approx. hours)...9 Knowing When to Replace the Batteries...9 Mains Power Connections...10 Connecting to the Earphones Socket Basic Operation...10 Powering ON/OFF Selecting Modes Adjusting the Volume DAB Operation...11 DAB Auto Scan Secondary Services Manual Tuning Storing Stations Recalling a Stored Station Display Modes FM Operation...14 Switching from DAB to FM Mode Auto Scan Manual Scan Audio Mode Storing Stations Recalling a Stored Station Display Modes Setting the Clock...16 Setting the Alarm (AC Operation Only)...16 Activating the Alarm Function...16 Automatic Alarm Repeat...17 Snooze Function (AC Operation Only)...17 Sleep Function (AC Operation Only)...17 Display Backlight...18 System Reset...18 Maintenance...19 Hints and Tips...19 Specifications...19

3 SOME DOS AND DON TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO DO DO DO DO read the operating instructions before you attempt to use the equipment. ensure that all electrical connections (including the mains plug, extension leads and inter-connections between the pieces of equipment) are properly made and in accordance with the manufacturer s instructions. Switch off and withdraw the mains plug before making or changing connections. consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. be careful with glass panels or doors on equipment. route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to excessive wear and tear or heat. DON T DON T DON'T DON'T DON'T DON'T DON'T DON'T DON'T remove any fixed cover as this may expose dangerous voltages. obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment. allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases, to be placed on the equipment. place hot objects or naked flame sources such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires. use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety always fit the manufacturer s approved stand or legs with the fixings provided according to the instructions. use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. listen to headphones at high volume, as such use can permanently damage your hearing. leave equipment switched on when it is unattended unless it is specifically stated that is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people. continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. ABOVE ALL NEVER let anyone especially children push anything into holes, slots or any other opening in the case this could result in a fatal electric shock; NEVER guess or take chances with electrical equipment of any kind; it is better to be safe than sorry! 3

4 Used correctly, domestic batteries are a safe and dependable source of portable power. Problems can occur if they are misused or abused resulting in leakage or, in extreme cases, fire or explosion. Here are some simple guidelines to safe battery use designed to eliminate any such problems. Take care to fit your batteries correctly, observing the plus and minus marks on the battery and appliance. Incorrect fitting can cause leakage or, in extreme cases, fire or even an explosion. Replace the whole set of batteries at one time, taking care not to mix old and new batteries or batteries of different types, since this can result in leakage or, in extreme cases, fire or even an explosion. Store unused batteries in their packaging and away from metal objects which may cause a short-circuit resulting in leakage or, in extreme cases, fire or even an explosion. Remove dead batteries from equipment and all batteries from equipment you know you are not going to use for a long time. Otherwise the batteries may leak and cause damage. Never dispose of batteries in fire as this can cause them to explode. Please recycle dead batteries; do not put with the normal household waste. Never attempt to recharge ordinary batteries, either in a charger or by applying heat to them. They may leak, cause fire or even explode. There are special rechargeable batteries which are clearly marked as such. Supervise children if they are replacing batteries themselves in order to ensure these guidelines are followed. Remember that small button cell batteries such as used in some hearing aids, toys, games and other appliances, are easily swallowed by young children and this can be dangerous. Keep loose button cells away from young children. Make sure battery compartments are secure. Seek medical advice if you believe a cell has been swallowed. 4

5 Safety Warnings Read all the instructions carefully before using the unit and keep them for future reference. Retain the manual. If you pass the unit onto a third party make sure to include this manual. Check that the voltage marked on the rating label matches your mains voltage. Damage Please inspect the unit for damage after unpacking. Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer. Location of Unit The unit must be placed on a flat stable surface and should not be subjected to vibrations. Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over. The mains socket must be located near the unit and should be easily accessible. Temperature Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas/ electric fires. Avoid exposure to direct sunlight and other sources of heat. Naked Flames Never place any type of candle or naked flame on the top of or near the unit. Moisture To reduce the risk of fire, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit. If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer. Ventilation To prevent the risk of electric shock or fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents. Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated. Safety Always disconnect the unit from the mains supply before connecting/ disconnecting other devices or moving the unit. Unplug the unit from the mains socket before a lightning storm. Mains Cable Make sure the unit is not resting on top of the mains cable, as the weight of the unit may damage the mains cable and create a safety hazard. If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. Interference Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound. Batteries Batteries used in the unit are easily swallowed by young children and this is dangerous. Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed. Please dispose of batteries correctly by following the guidance in this manual. Supervision 5

6 Children should be supervised to ensure that they do not play with the unit. Never let anyone especially children push anything into the holes, slots or any other openings in the case - this could result in a fatal electric shock. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the unit s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit. Service To reduce the risk of electric shock, do not remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel. Do not open any fixed covers as this may expose dangerous voltages. Maintenance Ensure to unplug the unit from the power supply before cleaning. Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit s surface. Do not use liquids to clean the unit. 6

7 STANDBY DAB/FM INFO MENU SLEEP TUNE/ PRESETS ALARM1 ALARM2 SNOOZE/ SELECT BACKLIGHT DAB/FM Digital Radio & Alarm Clock VOLUME/SELECT Thank you for purchasing your new Hitachi DAB+ FM Radio. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues. Read all the safety instructions carefully before use and keep this instruction manual for future reference. Unpacking Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local regulations. The following items are included: The Main Unit Mains Cable Instruction Manual 7

8 STANDBY DAB/FM INFO MENU SLEEP TUNE/ SELECT VOLUME/SELECT PRESETS ALARM1 ALARM2 SNOOZE/ BACKLIGHT Product Overview Front View 1 DAB/FM Digital Radio & Alarm Clock Handle 2. STANDBY Button 3. DAB/FM Button 4. INFO Button 5. MENU Button 6. SLEEP Button 7. Speakers 8. VOLUME/SELECT Control 9. LCD Display Window 10. TUNE/SELECT Button 11. PRESETS Button 12. ALARM1 Button 13. ALARM2 Button 14. SNOOZE/BACKLIGHT Button Rear View Earphones Socket 16. FM Aerial 17. Battery Door 18. Mains Cable Socket OPEN

9 Power Source Battery Power Insert 4 x 1.5V AA battery (not included) into the battery compartment located at the rear of the unit. Alarm and sleep function are not available under battery power. Battery Life (Approx. hours) When Using DAB FM Alkaline (Size AA) 6 6 Knowing When to Replace the Batteries When the batteries become weak, the sound becomes weak and distorted. When the batteries are completely exhausted, the power is turned off. Handling the Batteries Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause personal injury or damage to property. Install the batteries correctly by following the polarity (+ and ) indications in the battery compartment. Use only the types of the batteries which are indicated in this manual. Do not install new batteries with used ones and do not mix different types of batteries. Do not dispose of the used batteries as domestic waste. Dispose of them in accordance with local regulations. If you are not going to use the unit for a long time, remove the batteries to avoid damage from battery leakage and corrosion. Due to the short battery life span of some alkaline batteries. It is recommended to use rechargeable batteries. You will need to purchase a charger to charge the rechargeable batteries. This saves cost and is more environmentally friendly. 9

10 Mains Power Before using, connect the supplied power cable to the mains cable socket at the rear of the unit and to the mains socket. Connections Connecting to the Earphones Socket 1. Connect earphones (3.5mm stereo mini plug) to the earphones socket. 2. Adjust the volume control to obtain the desired volume level. 3. When the earphones are connected, the speakers will automatically mute. Avoid listening to sound excessive levels which could be harmful to your ear. Prolonged listening at full volume can damage the ears of the user. Basic Operation Powering ON/OFF Press the STANDBY button to switch the unit on. Press the STANDBY button again to switch the unit back to standby mode. Disconnect the mains plug from the mains socket if you want to switch the unit off completely. Selecting Modes Press the DAB/FM button repeatedly to switch between modes (DAB or FM). Adjusting the Volume Adjust the volume to the desired level by turning the VOLUME/SELECT control. 10

11 DAB Operation If the unit is connected to the mains power and then switched on from standby for the first time, the unit will automatically enter into the DAB mode and perform auto scan function. During the scan the display will show Scanning... together with a slide bar that indicates the progress of the scan and the amount of stations that have been found so far. Once the scan has finished, the unit will select the first alphanumerically found station. To explore the found stations, press the TUNE/SELECT button and then turn the VOLUME/SELECT control. When you find a station that you would like to listen to, press the TUNE/SELECT button. If no stations are found after auto scan, the unit will then enter into the Tune Select Menu. Turn the VOLUME/SELECT control and then press the TUNE/SELECT button to select manual tune or auto scan modes for stations. DAB Auto Scan The auto scan will search for the entire DAB Band III channels. After the scan has finished, the first alphanumerically found station will be automatically selected. Full auto scan will not replace the DAB stations in memory. If you want to remove all the previous scanned stations, system reset is required. 1. To activate auto scan, first press the MENU button to enter into the Tune Select Menu, then rotate the VOLUME/SELECT control to select Autoscan, finally press the TUNE/SELECT button to confirm, the display will show Scanning and a progressing slide bar. 2. All the stations that have been found will be stored automatically, to explore and select listening to the found stations, press the TUNE/SELECT button and then turn the VOLUME/SELECT control. Press the TUNE/SELECT button to confirm. 11

12 Secondary Services You may see a > symbol after the name of the station, this indicates that there are secondary services available to that station. These secondary services contain extra services that are related to the primary station. e.g. a sports station may want to add extra commentaries. The secondary services are inserted directly after the primary station in the station list. To select the secondary station, press the TUNE/SELECT button when the < appears in the display before the station name. When the secondary service ends, the unit will automatically switch back to the primary station. Manual Tuning As well as the auto tune function, you can manually tune the receiver. This can help you when aligning your aerial or when adding stations that were missed while auto tuning. 1. Press the MENU button and then press the TUNE/SELECT button to select Manual tune, the display will now show Manual tune. 2. Turn the VOLUME/SELECT control to cycle through the DAB channels, which are numbered from 5A to 13F. 3. After your desired channel number is selected, press the TUNE/SELECT button to enter the current multiplex, the top line will now display the first station in the multiplex. 4. Press the TUNE/SELECT button to select a station that you would like to listen to. Storing Stations You can store up to 10 of your favourite stations to the memory. This will enable you to access your favourite stations quickly and easily. 1. To store a preset, you must first be listening to the station that you would like to save, press and hold the PRESETS button. The Empty preset # will show on the display and the preset number will flash. 2. Turn the VOLUME/SELECT control to select your desired preset station number and then press the TUNE/SELECT button to confirm. 3. The station will be stored and the screen will then show Preset # Saved. Recalling a Stored Station 1. Once you have saved a station to one of the preset buttons, you can recall it by pressing the PRESETS button. 2. Turn the VOLUME/SELECT control to select your desired preset station number. 3. Press the TUNE/SELECT button to confirm the selection. 4. If you choose a preset that hasn t been allocated a station, the Empty preset # will be displayed. 12

13 Display Modes Every time you press the INFO button, the display will cycle through the following display modes: Ensemble/Multiplex (Group name), Time/Date, Frequency, Audio Bit Rate, Signal Strength, DLS, Programme Type. The information is displayed on the lower segment of the display. Multiplex Name A multiplex is a collection of radio stations that are bundled and transmitted on one frequency. There are national and local multiplexes. Local ones contain stations that are specific to that area. DAB unlike normal radio, groups together several radio stations and transmits them on one frequency. Ensemble/Multiplex (Group name) Time/Date Time/Date The broadcaster (Radio station) provides clock and date information automatically so there s no need to manually set this information. Frequency The frequency of the present station will be displayed. Audio Bit Rate The display will show the digital audio bit rate being received. Signal Strength The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer the bar will be from left to right. DLS (Dynamic Label Segment) Dynamic label segment is a scrolling message that the broadcaster may include with their transmissions. The message usually includes information, such as program details etc. Programme Type This describes the style of the programme that is being broadcast. If the information is not available, the display will show <Programme Type>. Frequency Audio Bit Rate Signal Strength DLS Programme Type 13

14 FM Operation Switching from DAB to FM Mode To switch the unit from DAB to FM mode, press the DAB/FM button once. The display will show FM and the frequency. Auto Scan To search for an FM station, press and hold the TUNE/SELECT button to start the auto scan. The display will show Searching.... Once a station has been found, the scanning will stop automatically. Manual Scan To search for FM stations manually, press the TUNE/SELECT button. The display will show <Tuning>. Turn the VOLUME/SELECT control until your desired frequency is reached. Audio Mode Press the MENU button to toggle between the Auto or Mono selection. The unit will automatically switch between stereo and mono mode, but you can override this and switch this function manually. This is helpful when receiving poor signal reception. Storing Stations You can store up to 10 of your favourite stations to the memory. This will enable you to access your favourite stations quickly and easily. 1. To store a preset, you must first be listening to the station that you would like to save, press and hold the PRESETS button. The Empty preset # will show on the display and the preset number will flash. 2. Turn the VOLUME/SELECT control to select your desired preset station number and then press the TUNE/SELECT button to confirm. 3. The station will be stored and the screen will then show Preset # Saved. 14

15 Recalling a Stored Station 1. Once you have saved a station to one of the preset buttons, you can recall it by pressing the PRESETS button. 2. Turn the VOLUME/SELECT control to select your desired preset station number. 3. Press the TUNE/SELECT button to confirm the selection. 4. If you choose a preset that hasn t been allocated a station, Empty preset # will be displayed. Display Modes Every time you press the INFO button, the display will cycle through the following display modes: Programme Type, Time/Date, Radio Text, Frequency. Programme Type This describes the Style or genre of music that is being broadcast e.g. Rock, Classical or Information. Time/Date The broadcaster (Radio station) provides clock and date information automatically so there s no need to manually set this information. In the unlikely event that the broadcaster does not transmit any clock information; the display will show <Time/Date>. Radio Text As with DAB, the broadcaster can include a scrolling text that displays information about the current program. If Radio text information is not available, then the display will show <Radio Text>. Programme Type Time/Date Radio Text Frequency Frequency This shows the frequency of the current station. 15

16 Setting the Clock The clock can only be updated if you can receive DAB signals in your location. In order for the clock to synchronise to the current local time you must leave it on one DAB station for a short period of time. Manual clock setting is not required. Setting the Alarm (AC Operation Only) Make sure you have preset FM and DAB stations before setting the Alarm. 1. The unit has two alarms. Press and hold the ALARM1/ ALARM2 button to set alarm 1 or alarm 2. The display will show Alarm # Setting and the hour digits will flash. 2. Turn the VOLUME/SELECT control to adjust the hour digits and then press the TUNE/SELECT button to confirm. 3. The minute digits will flash. Turn the VOLUME/SELECT control to adjust the minute digits and then press the TUNE/SELECT button to confirm. 4. Turn the VOLUME/SELECT control to select DAB preset station. Press the TUNE/SELECT button to confirm. 5. Turn the VOLUME/SELECT control to select FM preset station. Press the TUNE/SELECT button to confirm. 6. Turn the VOLUME/SELECT control to select Buzzer 1/2. Press the TUNE/SELECT button to confirm. 7. Turn the VOLUME/SELECT control to select the alarm wake up volume level. Press the TUNE/SELECT button to confirm. Activating the Alarm Function 1. To activate the alarm function, repeatedly press the ALARM1 or ALARM2 button. The alarm wake-up modes will be displayed and change in the below sequence on every press: Alarm Off DAB Preset # FM Preset # Buzzer Tone # 2. When the display shows your desired alarm wake-up mode, release the button. The alarm function is now activated and an alarm icon will be displayed. 16

17 3. When the alarm time arrives, the selected wake-up mode will be on and the alarm icon in the display will flash to indicate the alarm is triggered. To stop the alarm sooner, press the STANDBY button. 4. To check the alarm status, press the ALARM1 or ALARM2 button. The alarm status will show on the display. If you have activated the alarm function and the wake-up mode is DAB or FM, make sure that the volume is at a sufficient level for you to hear and you must preset the radio station first. Automatic Alarm Repeat The alarm will automatically repeat each day at the selected time as long as the alarm icon is displayed. To cancel this function, repeatedly press the ALARM1 or ALARM2 button until Alarm Off shows on the display. Snooze Function (AC Operation Only) When the alarm has triggered, press the SNOOZE button to temporarily switch off the alarm for 5 minutes. The display will show Zz to indicate that snooze is on. Snooze function will continue for 1 hour from the set alarm time. If alarm 2 is due to go off within 1 hour of alarm 1, it will not activate until alarm 1 has been switched off. Sleep Function (AC Operation Only) This function allows you to program the unit to switch off by itself after a set period of time. 1. To activate the sleep function, press the SLEEP button repeatedly until the Sleep Timer shows on the display. The time will change in the below sequence on every press: When your desired sleep time appears in the display, release the button and the sleep function will be activated in two seconds. S# will show on the display (for example S1 represents 10 minutes sleep time). 3. When the sleep time counts to zero, the unit will go off. To put the sleep function off while the sleep timer is still counting down, press the SLEEP button once, Sleep Off will show on the display. 4. Press the INFO button repeatedly to display the sleep timer status. The sleep function can be activated only in AC power operation. 17

18 Display Backlight There are four backlight levels for you to select from in AC mode. During AC standby and DC on mode, the backlight will be turned on to full brightness for 5 seconds on every key press. To set the backlight, press the SNOOZE/BACKLIGHT button repeatedly and the brightness of the display will change in the below sequence on every press: Backlight off > Backlight 01 > Backlight 02 > Backlight 03 > Backlight off > The Backlight function setting can be selected only in AC power operation. The display backlight level is defaulted to Backlight 01 in AC standby and Backlight 03 during operation. This is resumed only when the factory reset has taken place. System Reset There may be times when you need to reset your unit back to the factory settings especially when you have moved house. If you experience reception problems you may want to reset and try again. If you move to another part of the country and pick up the local and national DAB stations in that area, your previously tuned channels may no longer be available. 1. Press and hold the MENU button until the Press SELECT to confirm reset shows on the display. 2. Press the TUNE/SELECT button to start the system reset, Restarting will show on the display. After the reset is complete, the unit will go to standby mode. 3. Press the STANDBY button again to turn the unit on, the unit will then start scanning for DAB channels immediately. After the system reset, all the tuned stations, DAB & FM preset stations and alarm settings will be erased. 18

19 Maintenance Ensure to unplug the unit from the mains socket before cleaning. To clean the unit, wipe the case with a slightly moist, lint-free cloth. Do not use any cleaning fluids containing alcohol, ammonia or abrasives. Do not spray an aerosol at or near the unit. Hints and Tips No Sound Problem Static Sound Sound is distorted Desired station not found The LCD display shows SERVICE not available No DAB station. The LCD display is blank Solution Adjust the volume control, it may not be turned up. Signal reception too low. Adjust the aerial or move the unit to a stronger signal location. Volume is too high. Adjust the volume control. Weak signal. Use the Manual Tune function. No DAB coverage in your area or poor reception. Adjust the position of the aerial. Poor reception. Adjust the position of the aerial. This may occur if the broadcaster changes the label of a service or removes a label while tuned. The unit will try to retune or perform a scan. Specifications Model KH337E Mains Supply AC V~ 50/60Hz DC 6V 1.5V(UM3) x 4 Output Power 1.8W x 2 Radio Frequency Range FM MHz DAB MHz Dimension 246 (L) x 86.5 (W) x 126 (H) mm Weight 1.26kg Features and specifications are subject to change without notice. 19

20 Notes for battery disposal The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste. For more information, please contact the local authority or your retailer where you purchased the product. The above mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment display the chemical symbol Hg, Cd or Pb, then it means that the battery has a heavy metal content of more than % Mercury, or more than 0.002% Cadmium or more than, 0.004% Lead. In the unlikely event of a problem developing, please contact the store where you purchased your equipment. We continually strive to improve our products; specifications may change without prior notice. For advice on where to purchase accessories, please contact the store where you purchased your equipment. All trademarks are the property of their respective owners and all rights are acknowledged. Importer: Elkjøp, Solheimsveien 6-8, PB 153, NO 1471 Lørenskog, Norge Norge: Sverige: Danmark: Suomi: Manufacturer: Hitachi Europe Ltd., Whitebrook Park, Lower Cookham Road, Maidenhead, Berkshire SL6 8YA U.K AP-EF3-V3