QUICK-START GUIDE ROLAND DJ-808
|
|
- Douglas Barber
- 5 years ago
- Views:
Transcription
1 QUICK-START GUIDE ROLAND DJ-808
2 Installation and Setup The Roland DJ-808 requires drivers for both Windows and MacOS operating systems. IMPORTANT NOTE: Please ensure you have the latest available drivers AND firmware updates, which are vital for compatibility with Serato DJ. These can be found on Roland s website via the link below; 1. Download and install the latest version of Serato DJ from 2. Ensure all drivers and firmware updates for the Roland DJ-808 are installed. 3. Connect your Roland DJ-808 to an available USB Port. 4. Open Serato DJ.
3 Controller
4 NOTE: The SHIFT button is used with other buttons that have shift modifier functions. # Roland DJ-808 Control Function Shift Function 1 FX 1-3 DJ-FX slot 1-3 Effect On/Off/Adjust Slot 1-3 FX Parameter Slot 1-3 Select Effect 2 BEATS Adjust Beats Multiplier/Reset Beat Multiplier 3 TAP TEMPO Tap to the desired FX tempo. To return to AUTO mode, press Cycle FX mode (single/multi) and hold. 4 PANEL Toggles through Serato DJ panels Cycle View mode 5 QUANTIZE Enable Quantize 6 CHANNEL GAIN/EQ Channel gain and EQ controls 7 LOAD Load highlighted track to deck Sort library by column 8 BACK Toggles focus back between Library and Crate list 9 BROWSER Library scroll Fast Library scroll 10 LOAD PREPARE Loads the highlighted track to Prepare Crate Toggle through Serato DJ areas 11 MASTER OUTPUT Adjusts Master volume for controller 12 FX ASSIGN Assign channel to FX unit 1/2 13 BOOTH MONITOR Adjusts Booth Monitor volume 14 VT Section SEE VT SECTION FOR MORE INFORMATION 15 BEATGRID ADJUST Enable Beatgrid Adjust mode Set Beatgrid Marker 16 BEATGRID SLIDE Enable Beatgrid Slide mode Clear Beatgrid 17 CENSOR Censors playing track Enables reverse 18 TEMPO SLIDER Adjusts tempo/pitch Ignore tempo/pitch adjustment 19 DOWN Key Shift down Toggle Pitch range down
5 # Roland DJ-808 Control Function Shift Function 20 KEY SYNC Toggle Key Sync On/Off Toggle Keylock On/Off 21 UP Key Shift up Toggle Pitch range up 22 LOOP CONTROLS Loop Controls. SEE LOOPING FOR MORE INFORMATION 23 PARAMETER Adjusts Parameter -/+ in performance pad modes Adjust Parameter2 in performance pad modes 24 SYNC Turns SYNC on Turns SYNC off 25 CHANNEL FX KNOB Adjust the effect selected in the CHANNEL FX section 26 CHANNEL FX Select the desired channel effect CH Fader Start 27 CROSSFADER Crossfade audio between channel A-B 28 CHANNEL CUE Cues selected channel for headphone monitoring Keysync VT unit with selected channel. SEE VT VOICE TRANSFORMER SECTION FOR MORE INFORMATION 29 CHANNEL FADER Channel volume 30 CUE Cues from temp cue point/set Temp Cue point Load previous track to deck 31 PLAY/PAUSE Used with other controls that have SHIFT modifier functions Stutter Play 32 PERFORMANCE PADS SEE PERFORMANCE PADS FOR MORE INFORMATION 33 SHIFT Used with other controls that have SHIFT modifier functions 34 DECK SELECT Press individually for respective deck select (press both to engage Dual deck mode) 35 PLATTER/JOG WHEEL Control waveform with Serato DJ 36 SLIP Turn Slip on/off Toggle vinyl mode 37 TR-S section SEE TR-S RHYTHM SEQUENCER FOR MORE INFORMATION
6 # Roland DJ-808 Control # Roland DJ-808 Control 1 DC INPUT 11 USB HOST 2 POWER ON/OFF SWITCH 12 PC PORT (USB) 3 MIC SENSITIVITY 13 HEADPHONE OUTPUTS 4 MIC INPUT 14 HEADPHONE LEVEL 5 MASTER OUTPUT 1 & 2 15 HEADPHONE MIX 6 BOOTH OUTPUT 16 HEADPHONE MONO SPLIT/STEREO SWITCH 7 RCA INPUT/CHANNEL 2 & 4 17 INPUT SELECT 8 PHONO GROUND TERMINAL 18 CROSSFADER ASSIGN 9 RCA INPUT/CHANNEL 1 & 3 19 CROSSFADER CURVE ADJUST 10 MIDI OUT 20 CHANNEL FADER CURVE ADJUST
7 Looping You have up to 8 loops per track in Serato DJ, and the choice between either manual or auto loops. To store the currently active or most recently created loop, click in the loop tab in the software. DJ-808 Control Serato DJ Function Shift AUTO LOOP Autoloop On/Off Activate selected loop 1/2X Halve Loop Length Loop Shift Left 2X Double Loop Length Loop Shift Right IN Set loop in point (Loop Saved Loop slot select not active)/adjust loop in point (Loop active) OUT Set loop out point (Loop in point set)/adjust loop out point (Loop active) Loop Exit (Loop active)/ Reloop (Loop not active) DVS Expansion Pack The Roland DJ-808 is Serato DVS Upgrade Ready. Use turntables or CD players to control Serato DJ using NoiseMap Control Tone records or CDs. You can enable CD and Vinyl control through the Setup screen after the DVS Expansion upgrade is purchased and has been activated inside the software. Serato Flip Flip is an Expansion Pack for Serato DJ. Flip controls are only available once the Flip expansion pack has been purchased and activated. The expansion pack can be purchased in-app through the Serato DJ Online window, or online at In Hot Cue performance pad mode the Left and Right Parameter buttons are used to record and trigger Flips. Control Flip function Shift Left Parameter button Right Parameter button Starts the recording of a new Flip Starts the current Flip / re-trigger Flip Turns Flip Loop on/off Turns current Flip On/Off Press Hot Cue mode twice to enter Flip performance pad mode. Pressing pads 1-6 in will trigger saved Flips, pressing SHIFT + pads 1-6 will turn saved Flips on/off. Pressing an empty Flip slot will save any active Flip to that slot. Note: Due to the configuration of the controller, DVS control is only available through channels 1 and 2. Channels 3 and 4 are reserved for THRU mode & USB. For more information and to purchase the DVS Expansion, see
8 DJ-FX The DJ-FX in Serato DJ are powered by izotope. Click the FX tab to open the FX panel. Select either 1, 2, 3, 4 or AUX to assign the selected effect bank to a deck or auxilliary output. There are two available modes in the DJ-FX. Single FX Mode allows you to select one effect per FX bank, and has multiple parameters that can be adjusted. Multi FX Mode allows you to select up to three effects per FX bank, and adjust only one parameter, the FX Depth. The same effects available in Single FX mode are available in Multi FX mode, as well some additional presets. You can select between the two FX modes by clicking either the Single FX mode button or Multi FX mode button Roland DJ-808 Control Single FX Mode Multi FX Mode Shift ON (Button 1) Effect On/Off Slot 1 Effect On/Off Slot 1 Select Effect ON (Button 2) Adjust FX Parameter 2 Slot 2 Effect On/Off Slot 2 Select Effect ON (Button 3) Adjust FX Parameter 4 Slot 3 Effect On/Off Slot 3 Select Effect FX KNOB 1 Adjust FX Parameter 1 Adjust Slot 1 FX Parameter FX KNOB 2 Adjust FX Parameter 3 Adjust Slot 2 FX Parameter FX KNOB 3 Adjust FX Parameter 5 Adjust Slot 3 FX Parameter TAP Tap to the desired FX tempo. To return to AUTO Tap to the desired FX tempo. To return to AUTO mode, Toggle between Single/Multi FX mode, press and hold press and hold Modes BEATS (rotate knob) Adjust Beats Multiplier Adjust Beats Multiplier BEATS (press knob) Reset to 1 (beat cycle) value Reset to 1 (beat cycle) value
9 Performance Pads Roll mode: When holding buttons 1-8 you can activate a loop roll. Releasing the pad will disengage the loop roll. Saved Loop mode: Pads 1-8 will trigger saved loops. Holding SHIFT and pressing a pad in Save Loop mode will re-trigger the Saved Loop. Slicer mode: A shifting, specified range (or domain) is divided into eight equal sections, and these eight sliced sections are assigned to the respective performance pads. Slicer 2 mode: Same as above, but a fixed Slicer domain or loop. Controls are the same in both Slicer modes: Use PARAMETER-/+ to set the quantization for the slicer function. The quantization can be set in four ways: 1/8, 1/4, 1/2 and 1. Hold SHIFT + PARAMETER-/+ to set the domain. The domain can be set to one of six settings: 2 beats, 4 beats, 8 beats, 16 beats, 32 beats or 64 beats. The Roland DJ-808 RGB performance pads have 13 different modes you can select. The first four modes are (from left-to-right); Hot Cue, Roll, TR and Sampler. The second four modes are (from left-to-right); Cue Loop, Slicer, Pattern and Pitch Play and can be activated by pressing the performance pad mode button with SHIFT held down. A second Slicer mode (Slicer 2) can be activated by pressing the Slicer performance pad mode button twice while SHIFT is held down. The third four modes are (from left-to-right); Saved Flip, Saved Loop, TR Velocity, and Sampler Velocity, and are activated by pressing the performance pad mode buttons a second time. Hot Cue mode: When pressing pads 1-8 you can add up to 8 Cue Points. Holding SHIFT and pressing buttons 1-8 will delete the Cue Points. Saved Flip mode: Pressing pads 1-8 will trigger saved Flips, pressing SHIFT + pads 1-8 will turn saved Flips on/off. Pressing an empty Flip slot will save any Flip (that is being recorded) to that slot. Cue Loop mode: Press pads 1-8 will play a Loop Roll from the Cue point position. Press the pad again to deactivate the Cue Loop. Press the performance pad while holding SHIFT to retrigger the Cue Loop. The dedicated loop controls also work in Cue Loop mode. TR mode: Pressing pads 1-4 will trigger the BD, SD, CH, and OH sounds from the TR-S section. Pads 5-8, while held, will trigger a pre-determined pattern (for BD/SD/CH and OH sounds, from the TR-S section). The PARAMETER-/+ buttons will cycle 4 different pre-determined patterns. TR Velocity mode: The same as TR mode above, but pads use velocity message to determine volume of TR-S sounds triggered. Pattern mode: Pressing pads lets you choose up to 16 sequenced patterns from the TR-S section. Pads 1-8 can be accessed just bey pressing the pads and 9-16 by holding SHIFT and pressing a pad. The pad will flash until the next sequence and then go solid to indicate the newly chosen pattern has started. Patterns are retained after a power cycle of the DJ-808, and can be recorded using the INST REC function of the TR-S section. Sampler mode: Pads 1-8 trigger samples loaded in your Sample Banks. Use PARAMETER-/+ buttons to cycle through Sample Banks. Press SHIFT + PARAMTER-/+ to cycle through Sampler output options. Pitch Play mode: Pads 1-8 play Cue points over variable pitch ranges. See the Pitch Play section for more information. Sampler Velocity mode: When enabled the Sampler sample slot volume will now be velocity sensitive when played using the performance pads.
10 Pitch Play Holding SHIFT and pressing the SAMPLER performance pad mode on the DJ-808 will enable Pitch Play mode. In this mode you an play Cue Points over variable pitch ranges. There are 3 key ranges to choose from. The following tables show pitched key ranges (in Semitones) while using the 8 performance pads in Pitch Play mode. To toggle beteen key ranges press the PARAMETER-/+ buttons. The root key pad (0) is always lit white, which will play the cue point at it s regular pitch. When in Pitch Play mode, pressing a pad will pitch the currently selected cue point up or down the following ranges: Up Range (Up 7 Semitones) Middle Range (Up 3/Down 4 Semitones PITCH PLAY can only pitch one Hot Cue point at a time. To change the selected Hot Cue, hold the SHIFT button and press a performance pad where the cue point you want to select would be (as shown in the CUES performance pad mode). While holding SHIFT, press the corosponding performance pad for: Hot Cue 1 Hot Cue 2 Hot Cue 3 Hot Cue 4 Hot Cue 5 Hot Cue 6 Hot Cue 7 Hot Cue 8 The selected cue point defaults to Cue Point 1 on track load, even if instant doubled. If a pad with no cue point is selected, then a new cue point will be created. Deleting a cue point however, is not possible in PITCH PLAY mode. Range is remembered if user goes to another pad mode, then back to key mode. If a new track is loaded, key mode will default to middle range. NOTE: Pitch Play mode is avaialble once the Pitch n Time DJ Expansion Pack has been activated in the MY SERATO window. Make sure Enable Pitch n Time DJ is checked in the Expansion Pack tab of the SETUP screen. Down Range (Down 7 Semitones) When Pitch Play mode is first enabled, the middle range is selected. If a new track is loaded, key mode will default to middle range.
11 Beat Jump To activate Beat Jump, open the Setup screen and under the DJ preferences tab turn on Show Beat Jump Controls. When you close the Setup screen you will see Beat Jump controls underneath the existing Auto Loop values on each deck. Checking this box will turn on Beat Jump features in the deck area and let you control Beat Jump from on your supported Serato DJ hardware. When the Beat Jump option is enabled, controllers with 8 performance pads that have an AUTO LOOP or LOOP ROLL mode will use the bottom row of 4 pads (pads 5-8) as Beat Jump controls. This is designed to mirror the change in deck Auto Loop area (from 8 Auto Loop sizes to 4 Auto Loop sizes + Beat Jump controls). Performance Pad Function Beat Jump disabled Beat Jump enabled Pad 5 Pad 6 Pad 7 Pad 8 Auto Loop/ Loop Roll 5 Beat Jump Left Auto Loop/ Loop Roll 6 Beat Select Left Auto Loop/ Loop Roll 7 Beat Select Right Auto Loop/ Loop Roll 8 Beat Jump Right Controllers with Loop Shift controls can now perform a Beat Jump by enabling Beat Jump in the Setup screen. Regular Loop Shift is still available when Beat Jump is disabled in the Setup screen. MIDI The MIDI feature in Serato DJ provides the ability to remap Serato DJ software functions to your primary Serato DJ controller, interface or mixer. You can also assign controls to a secondary MIDI controller to further enhance your performance. For more information on MIDI mapping with Serato DJ click here. To remap your supported Serato DJ device, open the SETUP screen and click the MIDI tab. If your Serato DJ device supports hardware remapping it will show up in the MIDI Devices list at the top. Select your connected device from the MIDI Devices list and make sure the Allow Serato Hardware Remapping option is checked. Once checked, the MIDI assign button at the top of the screen will become available for you to start remapping. You can save, edit or delete MIDI presets in the MIDI tab of the SETUP screen. Clicking Restore Defaults will erase any custom mappings for all connected devices and revert their functions back to default. Download the Serato DJ software manual for further information. NOTE: Official Serato Accessories do not currently support user remapping. Hardware features that cannot be remapped at this stage are Jogwheels/ Platters, Input Switches, Shift buttons and Performance Pad Mode buttons. Re-mapping any pad(s) in Hot Cue mode will also re-map the same pad in Saved Flip mode and vice versa.
12 TR-S Rhythm Sequencer The TR-S built-into the DJ-808 is designed to be used with Serato DJ and can be synchronised with the virtual decks in Serato DJ. It can also be used to sequence samples from Serato DJ s built-in Sampler. Simply press any of the steps in the 16-step sequencer, causing them to light up in red, which indicates the step has been activated. The first step in the beat will be highlighted in blue, which will change depending on the pattern scale chosen. A green light cycling through the sequence will show the step currently playing # TR-S Control Function Shift Function 12 1 DISPLAY Shows value for settings adjustments 2 SCALE Selects timing for step value 3 TRIM Adjusts volume of selected TR-S instrument 4 ATTACK Adjusts strength of attack for BD sound, or snare rattle of SD sound 5 TR-REC Lets you step-record a pattern Lets you record a pattern using the performance pads. SEE PERFORMANCE PADS FOR MORE INFORMATION 6 FX1/2 Turns on FX (1 or 2) for the TR-S section. SEE DJ-FX FOR MORE INFORMATION 7 TR INSTRUMENTS Selects instruments BD, SD, CH, or OH Selects TR-909, TR-808, TR-707, or TR-606 instruments
13 # TR-S Control Function Shift Function 8 SERATO SAMPLER 1-4 Selects Serato Sampler slots 1-4 as instruments Selects Serato Sampler banks A, B, C or D 9 SERATO SAMPLER 5-8 Selects Serato Sampler slots 5-8 as instruments 10 ACCENT Press ACC (Accent), then press a step in the sequence to implement an accent on that step 11 CLEAR Deletes the content recorded by TR-REC for a specific instrument or deletes the pattern 12 TR-S MIXER Adjusts output level of TR-S instruments 13 STEP SEQUENCER Enable steps in the sequencer, or select patterns/instruments 14 START/STOP Plays or Stops the pattern Retriggers the pattern 15 SHIFT Used with other buttons that have SHIFT modifiers 16 PATTERN Lets you select rhythm patterns Hold while repeatedly pressing Serato Sampler slot buttons 1-8 to cycle through the 3 sample play modes for each slot 17 DECAY Adjusts Decay of BD, SD, OH, or CH instruments 18 TUNE Adjuts tuning (pitch) of selected BD, SD, OH, or CH instruments 19 SYNC Synchronises tempo of TR-S with Serato DJ 20 SHUFFLE Adjuts shuffle or rhythmic swing 21 VALUE Changes the value of tempo, scale or shuffle settings
14 VT Voice Transformer The VT unit built-into the DJ-808 can be used to effect voice input via a connected microphone, similar to a vocoder. If AUTO PITCH is enabled, you can synchronise the key with Serato DJ decks, by holding SHIFT while pressing PFL CUE button on the respective channel (labeled as KEY VT). While holding SHIFT the PFL CUE button that is currently set to key-sync, will flash. Without AUTO PITCH enabled, controls on the VT unit will operate independantly of Serato DJ. 1 2 AIRA Link The DJ-808 is capable of tempo synchronising with Roland AIRA-Link capable hardware, via it s TR-S section, and by proxy Serato DJ. Up to three compatible devices can be connected via the USB host, or via the MIDI OUT ports on the back of the DJ-808. Using the Tool Tips Click on the icon to enable Tool Tips. This is located in between the MIDI and setup button in the top right hand corner of the screen. Tool Tips provide a handy way to learn the various features of Serato DJ. Move the mouse over a section of the screen to bring up a context sensitive tool tip. Holding the mouse over the button with Tool Tips turned on will show you a list of all keyboard shortcuts. 4 # VT Control Function 3 For more information about how to use Serato DJ, please go to our website or refer to the Serato DJ Software Manual. For more information on your controller, please refer to the hardware manual. For further help please contact support@serato.com or go to 1 MIC SWITCH Turns mic input on, off, or selects ducking 2 MIC GAIN & EQ Adjusts mic output gain, low and high frequency of mic input 3 MIC PITCH/FORMANT/ REVERB 4 AUTO PITCH Toggles Auto Pitch Adjusts pitch, formant, and reverb of mic input
QUICK-START GUIDE RELOOP MIXON4
QUICK-START GUIDE RELOOP MIXON4 Installation and Setup The Reloop MIXON4 is a class compliant USB plug and play device for Mac, however requires drivers for Windows. You will find these on Reloop s website.
More informationQUICK-START GUIDE DENON DJ MC4000
QUICK-START GUIDE DENON DJ MC4000 Installation and Setup The Denon DJ MC4000 is a class compliant USB plug and play device for Mac and Windows. 1. Download and install the latest version of Serato DJ Intro
More informationTable of Contents. Introduction... 4 Box Contents... 4 Support Setup Features... 6 Top Panel... 6 Front Panel Rear Panel...
User Guide Table of Contents Introduction... 4 Box Contents... 4 Support... 4 Setup... 5 Features... 6 Top Panel... 6 Front Panel... 12 Rear Panel... 12 Using Serato DJ... 14 Mixing with Serato DJ... 14
More informationTable of Contents. Introduction Box Contents Support Setup Single-DJ Performance Transitioning Between DJs...
User Guide English Table of Contents Introduction... 4 Box Contents... 4 Support... 4 Setup... 5 Single-DJ Performance... 5 Transitioning Between DJs... 6 Features... 7 Top Panel... 7 Front Panel... 12
More informationOwner s Manual. Copyright 2017 ROLAND CORPORATION 01
Owner s Manual Before using this unit, carefully read USING THE UNIT SAFELY and IMPORTANT NOTES (leaflet USING THE UNIT SAFELY and Startup Guide). After reading, keep the document(s) where it will be available
More informationVirtualDJ 8 Pioneer DDJ-SR 1
VirtualDJ 8 Pioneer DDJ-SR 1 Table of Contents A. INSTALLATION... 3 Firmware & Drivers... 3 VirtualDJ 8 Setup... 3 Advanced Setup... 4 PAD PLUS mode... 4 B. MIXER... 5 C. DECKS... 7 D. EFFECTS... 9 E.
More informationOwner s Manual. Copyright 2017 ROLAND CORPORATION
Owner s Manual Before using this unit, carefully read USING THE UNIT SAFELY and IMPORTANT NOTES (Startup Guide). After reading, keep the document(s) where it will be available for immediate reference.
More informationStartup Guide. Copyright 2016 ROLAND CORPORATION
Startup Guide Before using this unit, carefully read USING THE UNIT SAFELY and IMPORTANT NOTES (leaflet USING THE UNIT SAFELY and Startup Guide (p. )). After reading, keep the document(s) where it will
More informationDDJ-SX3. DJ Controller. Operating Instructions
DJ Controller DDJ-SX3 pioneerdj.com/support/ http://serato.com/ For FAQs and other support information for this product, visit the above site. Operating Instructions Contents How to read this manual Thank
More informationVirtualDJ 8 Rane Sixty-Two 1
VirtualDJ 8 Rane Sixty-Two 1 Table of Contents Installation... 3 Connections... 3 Drivers... 4 VirtualDJ 8 Setup... 4 Advanced Setup... 5 VirtualDJ & Hardware Functionality... 6 A. Volume Mixer... 7 B.
More informationVirtualDJ 8 MD1310 1
VirtualDJ 8 MD1310 1 Table of Contents INSTALLATION... 3 Drivers... 3 VirtualDJ 8 installation... 3 VirtualDJ 8 Setup... 3 Advanced Setup... 4 LAYOUT... 6 A. MIXER... 7 B. BROWSER... 8 C. DECKS... 8 D.
More informationVirtualDJ 8 Rane TTM57 MKII 1
VirtualDJ 8 Rane TTM57 MKII 1 Table of Contents Installation... 3 Connections... 3 Drivers... 4 VirtualDJ 8 Setup... 4 Advanced Setup... 5 VirtualDJ & Hardware Functionality... 6 A. Volume Mixer... 7 B.
More informationVirtualDJ 8 Pioneer DDJ-SB2 1
VirtualDJ 8 Pioneer DDJ-SB2 1 Table of Contents A. INSTALLATION... 3 Firmware & Drivers... 3 VirtualDJ 8 Setup... 3 Advanced Setup... 4 B. MIXER... 5 C. DECKS... 7 D. PADS... 9 HotCues mode... 9 HotCues
More informationVirtualDJ 8 MD1311 1
VirtualDJ 8 MD1311 1 Table of Contents INSTALLATION... 3 Drivers... 3 VirtualDJ 8 installation... 3 VirtualDJ 8 Setup... 3 Advanced Setup... 4 LAYOUT... 6 A. MIXER... 7 B. BROWSER... 8 C. DECKS... 8 D.
More informationVirtualDJ 8 Hercules Universal DJ 1
VirtualDJ 8 Hercules Universal DJ 1 Table of Contents A. Installation... 3 Drivers... 3 VirtualDJ 8 Setup... 3 Advanced Setup... 4 B. Controls... 5 C. Pads... 8 HotCues... 8 Effects... 8 Sampler... 9 Loops...
More informationVirtualDJ 8 Rane Sixty-Four 1
VirtualDJ 8 Rane Sixty-Four 1 Table of Contents Installation... 3 Connections... 3 Drivers... 4 VirtualDJ 8 Setup... 4 Advanced Setup... 5 A. Deck Controls... 7 HotCues (Layer 1)... 8 Sampler (Layer 2)...
More informationVirtualDJ 8 American Audio VMS4 1
VirtualDJ 8 American Audio VMS4 1 Table of Contents INSTALLATION... 3 Firmware & Drivers & Setup... 3 VirtualDJ 8 Setup... 3 ADVANCED SETUP... 4 Midi Operation... 4 Audio Setup... 4 CONTROLS... 5 A.Mixer...
More informationVirtualDJ 8 American Audio 10MXR 1
VirtualDJ 8 American Audio 10MXR 1 Table of Contents A. INSTALLATION... 3 Firmware & Drivers & Mode... 3 VirtualDJ 8 Setup... 3 Advanced Setup... 4 B. CONTROLS... 5 C. RECORD & TIMECODES... 10 Recording
More informationVirtualDJ 8 American Audio 19MXR 1
VirtualDJ 8 American Audio 19MXR 1 Table of Contents A. INSTALLATION... 3 Firmware & Drivers & Mode... 3 VirtualDJ 8 Setup... 3 Mixer mode... 4 Controller mode... 5 B. CONTROLS... 6 C. RECORD & TIMECODES...
More informationVirtualDJ 8 Pioneer DDJ-SB 1
VirtualDJ 8 Pioneer DDJ-SB 1 Table of Contents A. INSTALLATION... 3 Firmware & Drivers... 3 VirtualDJ 8 Setup... 3 Advanced Setup... 4 B. MIXER... 5 C. DECKS... 7 D. PADS... 9 HotCues mode... 9 HotCues
More informationMC6000 MKII Guide to PCDJ DEX3. Top panel view. Front panel view
MC6000 MKII Guide to PCDJ DEX3 Top panel view Front panel view Effects Deck 1 PARAM 1 PARAM 2 PARAM 3 PREViOUS ON/OFF NEXT Nothing Effects Deck 2 PARAM 1 PARAM 2 PARAM 3 PREViOUS ON/OFF NEXT Nothing Microphones
More informationVirtualDJ Remote - User Guide 1
VirtualDJ Remote - User Guide 1 Table of Contents VIRTUALDJ REMOTE APPLICATION... 3 SETUP... 4 TABLET VIEW... 5 RHYTHM WAVE & DECK INFO DISPLAY... 6 BASIC DECK CONTROLS... 6 ADVANCED DECK CONTROLS... 7
More informationDJ SYSTEM XDJ-AERO. TRAKTOR PRO2 Connection Guide
DJ SYSTEM XDJ-AERO TRAKTOR PRO Connection Guide Introduction The XDJ-AERO is equipped with a computer control mode, allowing commercially available DJ software to be controlled when the XDJ-AERO is connected
More informationupgrade manual for Serato Performance Controllers TM2/4 Upgrade Manual for Serato DJ Page (1 of 7)
upgrade manual for Serato Performance Controllers TM2/4 Upgrade Manual for Serato DJ www.reloop.com Page (1 of 7) NeW features in Serato DJ The TM2/4 allows fast and intuitive working with your new Serato
More informationVirtualDJ 8 Numark Mixtrack II 1
VirtualDJ 8 Numark Mixtrack II 1 Table of Contents INSTALLATION... 3 Firmware & Drivers... 3 VirtualDJ 8 Setup... 3 Advanced Setup... 4 A. MIXER... 5 B. DECKS... 6 C. EFFECTS & UPPER PADS... 7 Effects
More informationDJ Controller DDJ-1000
DJ Controller DDJ-1000 pioneerdj.com/support/ rekordbox.com For FAQs and other support information for this product, visit the above site. Operating Instructions Contents How to read this manual! Thank
More informationSERATO DJ MANUAL
SERATO DJ 1.9.10 SOFTWARE MANUAL 1 Contents 7 Introduction 7 Hardware 7 Minimum System Requirements 8 Software Installation 8 Installation (Mac OSX) 8 Installation (PC) 9 Activation 9 Subscriptions 9 Try
More informationINSTALLATION 1/18. When using Hercules DJControl Jogvision for the first time: - Insert the CD-ROM in your computer s drive.
INSTALLATION When using Hercules DJControl Jogvision for the first time: - Insert the CD-ROM in your computer s drive. 1. Launch the installer program to install the Hercules DJControl Jogvision drivers
More informationVERSION 1.0 SERATO DJ 1.0 MANUAL
SERATO DJ 1.0 SOFTWARE MANUAL 1 Contents 7 Introduction 7 Hardware 7 Minimum System Requirements 7 Software Installation 8 Getting Started 8 Starting the Software 9 Software Overview 12 Using The Tool
More informationGUIDE D UTILISATION RAPIDE FRANÇAIS ( )
QUICKSTART GUIDE ENGLISH ( 11 ) GUÍA DE INICIO RÁPIDO ESPAÑOL ( 1 1 ) GUIDE D UTILISATION RAPIDE FRANÇAIS ( 1 ) GUIDA RAPIDA ITALIANO ( 41 ) KURZANLEITUNG DEUTSCH ( 4 1 ) BOX CONTENTS MIXDECK EXPRESS Power
More informationdjay 2 for iphone - Quick Start Guide
djay 2 for iphone - Quick Start Guide BPM (1) Settings (3) Info (5) Load Song (2) Record (4) Waveform view (6) Key (7) Speed Slider (9) Tools (11) (1) BPM Field - After the song has been analyzed, the
More informationNOW EVEN BETTER THE BEST DJ CONTROLLER EVER BUILT 2015 NEW PRODUCTS FOUR-DECK SERATO DJ CONTROLLER WITH MULTI-SCREEN DISPLAY NUMARK.
2015 NEW PRODUCTS THE BEST DJ CONTROLLER EVER BUILT NOW EVEN BETTER INCLUD ES FOUR-DECK SERATO DJ CONTROLLER WITH MULTI-SCREEN DISPLAY Integrated color displays provide real-time visual feedback of Serato
More informationDDJ-RZX. DJ controller. Operating Instructions.
DJ controller DDJ-RZX http://pioneerdj.com/support/ http://rekordbox.com/ For FAQs and other support information for this product, visit the above site. Operating Instructions Contents How to read this
More informationTR-808. Software Rhythm Composer Owner s Manual. Copyright 2018 ROLAND CORPORATION 01
TR-808 Software Rhythm Composer Owner s Manual Copyright 2018 ROLAND CORPORATION 01 Introduction For details on the settings for the DAW software that you re using, refer to the DAW s help or manuals.
More informationDJ INTRO MANUAL
SERATO DJ INTRO 1.3.0 SOFTWARE MANUAL Contents 5 INTRODUCTION 6 HARDWARE 6 Minimum System Requirements 7 SOFTWARE INSTALLATION 7 Installation (Mac OSX) 7 Installation (PC) 8 GETTING STARTED 8 Starting
More informationTable of Contents. Introduction Support Installation About Engine Prime Engine Prime Library vs. Engine Prime Target...
User Guide English Table of Contents Introduction... 5 Support... 5 Installation... 5 About Engine Prime... 5 Engine Prime Library vs. Engine Prime Target... 5 Overview... 6 Toolbar... 6 Deck... 7 Deck
More informationrekordbox TM Default Keyboard Shortcut Reference
rekordbox TM Default Keyboard Shortcut Reference Default keyboard shortcuts in rekordbox Performance mode In rekordbox, default keyboard shortcuts are preset exclusively for the Performance mode. This
More informationVirtualDJ 8 Hercules DJControlWave 1
VirtualDJ 8 Hercules DJControlWave 1 Table of Contents A. Installation... 3 Drivers... 3 VirtualDJ 8 Setup... 3 Advanced Setup... 4 B. Basic Controls... 5 C. Advanced Controls... 6 HotCues... 6 Sampler...
More informationTRUE VINYL TURNTABLE TWELVE. Motorized Control. The ultimate in legacy vinyl control for digital DJs and turntablists.
TWELVE TWELVE The ultimate in legacy vinyl control for digital DJs and turntablists. 12 acrylic, motorized platter 8 Hot Cue selector / Search strip Solid steel chassis With no tonearm or damaged/skipping
More informationDDJ-XP1. DJ Controller. Operating Instructions. pioneerdj.com/support/
DJ Controller DDJ-XP1 pioneerdj.com/support/ rekordbox.com The Pioneer DJ site shown above offers FAQs, information on software, and various other types of information and services to allow you to use
More informationTable of contents. Before Start. Activating Serato Flip. Serato Flip GUI. Buttons to control Serato Flip. Using Serato Flip.
Serato Flip Manual Table of contents Before Start Activating Serato Flip Preparation (Only for those who purchased ) Launching Serato DJ to display my serato window Entering your account info you have
More informationDJ controller DDJ-RX. Operating Instructions
DJ controller DDJ-RX http://pioneerdj.com/support/ The Pioneer DJ site shown above offers FAQs, information on software and various other types of information and services to allow you to use your product
More informationTB-303. Software Bass Line Owner s Manual Roland Corporation 01
TB-303 Software Bass Line Owner s Manual 2019 Roland Corporation 01 Introduction For details on the settings for the DAW software that you re using, refer to the DAW s help or manuals. About Trademarks
More informationQUICKSTART GUIDE ENGLISH ( 3 12 ) INICIO RÁPIDO ESPAÑOL ( ) UTILISATION SIMPLIFIÉ FRANÇAIS ( ) KURZANLEITUNG DEUTSCH ( )
QUICKSTART GUIDE ENGLISH ( 3 12 ) INICIO RÁPIDO ESPAÑOL ( 13 22 ) UTILISATION SIMPLIFIÉ FRANÇAIS ( 23 22 ) KURZANLEITUNG DEUTSCH ( 33 42 ) GUIDA RAPIDA ITALIANO ( 43 52 ) BOX CONTENTS Please make sure
More informationVirtualDJ 8 - User s Guide 1
VirtualDJ 8 - User s Guide 1 Table of Contents A. BASIC FEATURES... 4 Top Section... 6 Application Controls & Info... 6 Waveform Display... 7 Deck Controls... 10 Track Info Display... 10 Basic Deck Controls...
More informationUser Manual Cross 2.4
User Manual Cross 2.4 BEFORE USING KURO OR K2 WITH MIXVIBES SOFTWARE CROSS 2.0, BE SURE YOU HAVE AVAILABLE THE LATEST FIRMWARE VERSION FOR VIEWING YOUR CURRENT FIRMWARE FOLLOW THE INSTRUCTIONS BELOW: 1-
More informationIntroduction (page 6) This explains information on preparing and installing rekordbox, getting started, and using rekordbox.
About this manual Be sure to read this manual before using. This manual includes important information that you must understand before using rekordbox. In this manual, name of buttons and menus displayed
More information1. Disclaimer Welcome to TRAKTOR KONTROL S Document Conventions Documentation Resources In this Document...
Table of Contents 1. Disclaimer... 1 2. Welcome to TRAKTOR KONTROL S4... 2 2.1. Document Conventions... 2 2.2. Documentation Resources... 3 2.3. In this Document... 3 3. Concepts... 4 3.1. S4 and TRAKTOR
More informationConnecting the SI-24 to the VS-2400CD for Expanded Operation
Connecting the SI-24 to the VS-2400CD for Expanded Operation When the SI-24 is used in tandem with the VS-2400CD, it becomes a powerful expander with 8 additional analog preamps and faders, switches &
More informationMixVibes product line
ULTRA-ACCURATE TIMECODED VINYLS AND CDS SPARE Control Vinyl Record MixVibes is based on a revolutionary and innovative technology to ensure that you experience the genuine vinyl feeling when mixing digital
More informationGETTING STARTED WITH DJCONTROL COMPACT AND DJUCED 18
GETTING STARTED WITH DJCONTROL COMPACT AND DJUCED 18 INSTALLATION Connect the DJControl Compact to your computer Install the DJUCED 18 software Launch the DJUCED 18 software More information (forums, tutorials,
More informationQUICKSTART MANUAL ENGLISH ( 3 10 ) MANUALE DE INICIO RÁPIDO ESPAÑOL ( ) GUIDE D'UTILISATION SIMPLIFIÉ FRANÇAIS ( )
QUICKSTART MANUAL ENGLISH ( 3 10 ) MANUALE DE INICIO RÁPIDO ESPAÑOL ( 11 18 ) GUIDE D'UTILISATION SIMPLIFIÉ FRANÇAIS ( 19 26 ) GUIDA RAPIDA ITALIANO ( 27 34 ) KURZANLEITUNG DEUTSCH ( 35 42 ) :: Omni Control
More informationrekordbox TM rekordbox dvs Setup Guide
rekordbox TM rekordbox dvs Setup Guide Table of Contents 1 Before Start... 1 1.1 Prior to use... 1 1.2 Overview of rekordbox dvs... 1 1.3 Required equipment... 2 1.4 System requirements... 3 2 Preparing
More informationBeatMaker 3 User Manual. Revision:
BeatMaker 3 User Manual Revision: 3.0.10 What s new in version 3.0.10 of this manual - Updated section Quick Start Guide: 1.3 Transport toolbar - Added section Performance View: 2.7 Select mode - Updated
More informationMV-8000 Production Studio. When asked So what s up with the new MV-8000? Here are the opening points to hit The MV-8000 has:
The Main Points When asked So what s up with the new MV-8000? Here are the opening points to hit The MV-8000 has: Integrated Sampling, MIDI Sequencing, and Audio Recording 2 Samplers In One High Quality
More informationVersa Mix. User Guide and Reference Manual Charter Street Los Angeles Ca /07
Versa Mix User Guide and Reference Manual 2/07 4295 Charter Street Los Angeles Ca. 90058 www.americanaudio.us Introduction Congratulations and thank you for purchasing the American Audio Versa Mix. Versa
More informationDigitakt OS 1.07 Release Information
Digitakt OS 1.07 Release Information Elektron Music Machines March 9, 2018 How to upgrade: Upgrading from within the OS Select SYSTEM in the SETTINGS menu, and then select OS UPGRADE. Send the SysEx firmware
More informationUSER GUIDE. Publication AP7820. Allen & Heath User Guide for XONE:DX with Serato ITCH 1.6 1
USER GUIDE Publication AP7820 Allen & Heath User Guide for XONE:DX with Serato ITCH 1.6 1 Limited One Year Warranty This product is warranted to be free from defects in materials or workmanship for period
More informationMANUAL DE INICIO RÁPIDO ESPAÑOL ( ) GUIDE D UTILISATION RAPIDE FRANÇAIS ( ) MANUALE RAPIDO DI UTILIZZAZIONE ITALIANO ( )
QUICKSTART GUIDE ENGLISH ( 3 11 ) MANUAL DE INICIO RÁPIDO ESPAÑOL ( 12 20 ) GUIDE D UTILISATION RAPIDE FRANÇAIS ( 21 29 ) MANUALE RAPIDO DI UTILIZZAZIONE ITALIANO ( 30 38 ) KURZANLEITUNG DEUTSCH ( 39 47
More information1. Disclaimer Welcome to TRAKTOR KONTROL S Document Conventions Documentation Resources In this Document...
Table of Contents 1. Disclaimer... 4 2. Welcome to TRAKTOR KONTROL S4... 5 2.1. Document Conventions... 5 2.2. Documentation Resources... 6 2.3. In this Document... 6 3. Concepts... 7 3.1. S4 and TRAKTOR
More informationWorkshop. Automation ÂØÒňΠMV-8000
ÂØÒňΠMV-8000 Workshop Automation 2006 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced in any form without the written permission of Roland Corporation U.S.
More informationDigitakt OS 1.06 Release Information
Digitakt OS 1.06 Release Information Elektron Music Machines February 12, 2018 How to upgrade: Upgrading from within the OS Select SYSTEM in the SETTINGS menu, and then select OS UPGRADE. Send the SysEx
More informationrekordbox Pad Editor Operation Guide
rekordbox Pad Editor Operation Guide Table of contents 1. Before Start 1 1.1 Prior to use 1 1.2 Overview of Pad Editor 1 1.3 Controllers supporting Pad Editor 1 2. Customizing arrangement of the Performance
More informationPRO2. User Manual (Mac)
PRO Table of contents 1 Introduction 7 1.1 Minimum requirements 7 1. Interface tour 8 Glossary of terms 13 3 Quick start 16 3.1 Installing djay Pro 16 3.1.1 Download from the App Store 16 3.1. Download
More informationAxiom DirectLink for Reason and Record User Guide
User Guide Legal Notices This guide is copyrighted 2010 by Avid Technology, Inc., with all rights reserved. Under copyright laws, this guide may not be duplicated in whole or in part without the written
More informationProcussion operation manual Basic Operation 15 BASIC OPERATION
Basic Operation 15 BASIC OPERATION 16 Main Controls 17 BASIC OPERATION MAIN CONTROLS MIDI ACTIVITY EDIT MENU SELECT CURSOR CONTROL VOLUME CONTROL I/O MASTER EDIT ENTER C01 Vol127 Pan=K CURSOR DATA VOLUME
More information1. Disclaimer Welcome to TRAKTOR KONTROL S Document Conventions Documentation Resources In this Document...
Table of Contents 1. Disclaimer... 1 2. Welcome to TRAKTOR KONTROL S2... 2 2.1. Document Conventions... 2 2.2. Documentation Resources... 3 2.3. In this Document... 3 3. Concepts... 4 3.1. Automatic Track
More informationMixxx User Manual. Release The Mixxx Development Team
Mixxx User Manual Release 2.1.0 The Mixxx Development Team February 19, 2018 Contents 1 Introduction to Mixxx 1 1.1 How Mixxx Works............................................ 1 2 Getting Started 3 2.1
More informationUser Guide. English. Manual Version 1.0
User Guide English Manual Version 1.0 Table of Contents (Click a chapter/section to skip to it.) Introduction... 5 Box Contents... 5 Support... 5 About This User Guide... 5 Initial Setup... 6 1. Software/Driver
More informationand close the various Traktor Panels. Setup: click on the setup icon to open the setup dialog. Close: clicking this icon will close TRAKTOR DJ Studio.
Welcome... TRAKTOR DJ Studio 2 Quick Reference...to TRAKTOR DJ Studio 2, the latest and most advanced version of the software that changed the way DJs think about computers. We ve introduced a number of
More informationMixxx User Manual. Release The Mixxx Development Team
Mixxx User Manual Release 2.1.0 The Mixxx Development Team Apr 15, 2018 Contents 1 Introduction to Mixxx 1 1.1 How Mixxx Works............................................ 1 2 Getting Started 3 2.1 Opening
More informationPIONEER STRIKES GOLD WITH LIMITED EDITION DIGITAL DJ-SX GOLD MODEL
For Immediate Release Publicist PR Consultants T: 6220 4082 / 9835 1082 PIONEER STRIKES GOLD WITH LIMITED EDITION DIGITAL DJ-SX GOLD MODEL SINGAPORE 1 st November 2013 Pioneer DJ's flagship Serato controller
More informationUser Manual. Drum Machine
User Manual Drum Machine Overview Interface Overview Interface 1 Nithonat s interface is split into three parts: Internal sequencer Responsible for editing patterns in Int.Seq. mode. Internal sequencer
More informationPortable Music Studio
Everything you need, all in one. いつでも どこでも 作曲 Instruction Manual (08-2018) Portable Music Studio 1 Contents Features... 3 Basic Controls...4 - Menus and saving.. 5 Pattern Mode... 6 Global Pattern Settings...7
More information1. Disclaimer Welcome to TRAKTOR KONTROL S Document Conventions Documentation Resources In this Document...
Table of Contents 1. Disclaimer... 4 2. Welcome to TRAKTOR KONTROL S2... 5 2.1. Document Conventions... 5 2.2. Documentation Resources... 6 2.3. In this Document... 6 3. Concepts... 7 3.1. About Automatic
More informationChapter 2: Basic Operation...17
Chapter 1: Introduction...1 Top Panel...1 Front Panel...7 Rear Panel...8 Bottom Panel...9 Output Connectivity Example...10 Analog Input Connectivity Example...10 Digital Connectivity Example...11 USB Connectivity...11
More informationMPC Essentials Release Notes
MPC Essentials Release Notes About Akai Professional is continually updating and enhancing MPC Essentials. This document lists the new features, fixes and improvements made to your MPC Essentials software.
More informationPCDJ DEX 2 Quick Start Guide
PCDJ DEX 2 Quick Start Guide For all of us at PCDJ, features are paramount, but only if they're completely functional and easy-touse. This is why we've made this quick start guide that will get you accustomed
More informationOPERATOR S MANUAL 14374
OPERATOR S MANUAL 14374 Intro Refer to the separate Quick Start guide that was included in the box. If you lost yours, a new copy (along with this manual and all other documentation) may be downloaded
More informationPCDJ RED MOBILE 2 Quick Start Guide
PCDJ RED MOBILE 2 Quick Start Guide For all of us at PCDJ, features are paramount, but only if they're completely functional and easy-touse. This is why we've made this quick start guide that will get
More informationPCDJ RED MOBILE 2 Quick Start Guide
PCDJ RED MOBILE 2 Quick Start Guide For all of us at PCDJ, features are paramount, but only if they're completely functional and easy-touse. This is why we've made this quick start guide that will get
More information1. Welcome. DJUCED 40 is designed to make mixing easier and more enjoyable, thanks to a unique graphic interface and ergonomic functionality.
Reference manual 1. Welcome Welcome and thank you for using DJUCED 40. DJUCED 40 is a DJing application which adds elegance to the power of its functions for mixing audio tracks, remixing, pad-based performance,
More informationQuick Start Owner s Manual. Manual de inicio rápido del
Professional CD Mixing Console Quick Start Owner s Manual BOX CONTENTS CDMIX3 CD MIXING STATION POWER ADAPTER Manual de inicio rápido del usuario(español) CONTENIDO DE LA CAJA ESTACIÓN DE MEZCLAS DE CD
More informationPSP Rhythm User s Manual
PSP Rhythm User s Manual Introduction pg. 02 Main Menu pg. 03 Button Icon Legend pg. 03 User Interface pg. 04 Pattern View pg. 05 Track View pg. 07 Wave View pg. 09 Effects View pg. 11 Song View pg. 14
More information2. Box contents. - Hercules DJControl Instinct P8 - USB cable (type A male/type B male), length: 4.9 feet / 1.5 meters - Quick start guide
User manual 1. Overview 2. Box contents - Hercules DJControl Instinct P8 - USB cable (type A male/type B male), length: 4.9 feet / 1.5 meters - Quick start guide 3. Product specifications 3.1. Mechanical
More informationVERSION 1.0 USER MANUAL
VERSION 1.0 USER MANUAL Contents 5 INTRODUCTION 6 HARDWARE 6 Minimum System Requirements 7 SOFTWARE INSTALLATION 7 Installation (Mac OSX) 7 Installation (PC) 8 GETTING STARTED 8 Starting the Software 9
More informationDigitakt OS 1.10 Release Information
Digitakt OS 1.10 Release Information Elektron Music Machines June 29, 2018 How to upgrade: Upgrading from within the OS Select SYSTEM in the SETTINGS menu, and then select OS UPGRADE. Send the SysEx firmware
More informationOPERATION MANUAL VST / AU
OPERATION MANUAL VST / AU This manual is under construction. If you want to help to improve it contact: info@audiorealism.se Introduction AudioRealism Bass Line 3 (ABL3) is an emulation of a classic pattern
More informationMV-8800 Production Studio
ÂØÒňΠWorkshop MV-8800 Production Studio Auto Chop 2007 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced in any form without the written permission of Roland
More informationUsers Guide written by André Benedix, Friedemann Becker, Irmgard Bauer Version: 1.0 (10/2008)
USER MANUAL The information in this document is subject to change without notice and does not represent a commitment on the part of NATIVE INSTRUMENTS GmbH. The software described by this document is subject
More informationHardware Control Reference
Hardware Control Reference Disclaimer The information in this document is subject to change without notice and does not represent a commitment on the part of Native Instruments GmbH. The software described
More informationrekordbox TM MIDI LEARN Operation Guide
rekordbox TM MIDI LEARN Operation Guide 1 OVERVIEW This guide explains how to use MIDI LEARN function in rekordbox dj (Performance mode). For instructions on rekordbox in general, see the Operating Instructions
More informationStepPolyArp Unit. Step Polyphonic Arpeggiator / Sequencer App & Audio Unit MIDI effect for ios
StepPolyArp Unit Step Polyphonic Arpeggiator / Sequencer App & Audio Unit MIDI effect for ios Presentation... 1 Application setup... 2 MIDI connections between ios applications... 2 MIDI over WiFi on macos...
More informationrekordbox TM rekordbox dvs Setup Guide
rekordbox TM rekordbox dvs Setup Guide Table of Contents 1 Before Start... 1 1.1 Prior to use... 1 1.2 Overview of rekordbox dvs... 1 1.3 Required equipment... 2 1.4 System requirements... 3 2 Preparing
More informationInstruction Manual. Astro-AXS580DS
Instruction Manual Astro-AXS580DS 1 Congratulations! We at Astro Drums would like to congratulate you on the purchase of the Astro AXE580DS Electronic drum kit. The included module, the AXE800DM, is designed
More informationCDN88 MP3. Professional Dual CD / MP3 Player REFERENCE MANUAL ENGLISH ( 3 21 )
CDN88 MP3 Professional Dual CD / MP3 Player REFERENCE MANUAL ENGLISH ( 3 21 ) GROUND RULES 1. Make sure all items listed in the BOX CONTENTS section are included in the box. 2. READ SAFETY & WARRANTY
More informationFirmware Version 1.60 User s Guide
MZ-X500 EN MZ-X300 Firmware Version 1.60 User s Guide MZX500/300-160-E-1A 1 Updates Provided by Firmware Version 1.10 Firmware changes provided by Version 1.0X are those described below. Addition of a
More informationDER OTO. With this firmware revision, you can use your Biscuit as a standard one (Revision 1.2) or as Der OTO.
User Manual Rev 2.3 February 2012 1 DER OTO PRESENTATION Der OTO is the new Biscuit firmware (revision 2) and turns your Biscuit into a monophonic synth. You can play Der OTO with a standard MIDI keyboard,
More informationUsing Panorama with Bitwig Studio
www.nektartech.com www.nektartech.com Using Panorama with Bitwig Studio Bitwig Studio Integration Setup and Configuration The Panorama Bitwig Studio Integration is compatible with Bitwig Studio 1.3.5 and
More informationGETTING STARTED WITH DJCONTROL INSTINCT AND DJUCED UK US
GETTING STARTED WITH DJCONTROL INSTINCT AND DJUCED INSTALLATION Insert the CD-ROM. Run the installer program. Follow the instructions. 6 1 2 7 3 4 5 1- Channels 1-2 (mix output) balance 2- Volume on channels
More information