MOBILE SAFETY DVR1543K. CLIP ON REARVIEW MIRROR KIT with 4.3-INCH LCD MONITOR FRONT & REAR CAR CAMCORDER with DUAL MOUNTING REVERSING CAMERA

Size: px

Start display at page:

Download "MOBILE SAFETY DVR1543K. CLIP ON REARVIEW MIRROR KIT with 4.3-INCH LCD MONITOR FRONT & REAR CAR CAMCORDER with DUAL MOUNTING REVERSING CAMERA"

Matthew Wade
5 years ago
Views:

MOBILE SAFETY DVR1543K REARVIEW MIRROR CAR DRIVING RECORDER KIT CLIP ON REARVIEW MIRROR KIT with 4.

0 MEGA PIXEL CAMERA SPECIFICATIONS BLACK BOX RECORDER Camera: (Forward) OV9712-3 MP High Definition Lens Angle: 140 Wide Angle Solution:

AVI (Rear Camera) Video Resolution: 1920*1080P (Front Camera) 1280*720P/640*480P (Rear Camera) Micro SD Card Capacity: Supports up to 32GB

0 Recording: Cycle Recording G-Sensor: Detects crashes and sudden changes in force MIRROR Surface: Design: Mounting: Interface: Battery:

Specialised metallic mirror. Anti-Glare/Anti-Fatigue Slimline. Stealth touch buttons Universal Clip On to Original Factory Mirror USB2.

1 MOBILE SAFETY DVR1543K REARVIEW MIRROR CAR DRIVING RECORDER KIT CLIP ON REARVIEW MIRROR KIT with 4.3-INCH LCD MONITOR FRONT & REAR CAR CAMCORDER with DUAL MOUNTING REVERSING CAMERA 3.0 MEGA PIXEL CAMERA SPECIFICATIONS BLACK BOX RECORDER Camera: (Forward) OV MP High Definition Lens Angle: 140 Wide Angle Solution: NT96220 Inbuilt Monitor: 4.3 Professional LCD Digital Video Record Format:.MOV (Front Camera).AVI (Rear Camera) Video Resolution: 1920*1080P (Front Camera) 1280*720P/640*480P (Rear Camera) Micro SD Card Capacity: Supports up to 32GB (Minimum Class 6) (Not Supplied) USB Interface: USB 2.0 Recording: Cycle Recording G-Sensor: Detects crashes and sudden changes in force MIRROR Surface: Design: Mounting: Interface: Battery: Power: Dimensions: REAR CAMERA (C20A): Lens: Sensor: Viewing Angle: Video System: Protection: Installation: Power Source: Connections: Specialised metallic mirror. Anti-Glare/Anti-Fatigue Slimline. Stealth touch buttons Universal Clip On to Original Factory Mirror USB2.0 (DC5V 1.5A) 300mAh 3.7V Polymer Lithium DC5V 1.5A (12/24V Cig Power Plug Reducer) 317W x 80H x 12D mm 1/4 CMOS Imaging Clip PC1089 Quality Sensor Chip 170 Wide View PAL - Mirror Image IP66 - Water & Dust Ingress 1. Butterfly mount to number plate, boot lid or other surface 2. Insert to bumper 12 Volt DC from Reversing Light circuit 6M Video Cable from Camera to Monitor 3.4m Power Cable

2 Product Introduction This 4.3 Inch Rear View mirror with DVR is a multifunctional product that is equipped with Dual High Definition cameras, Video Recording, Audio Recording, Web Camera, Video Out, G-Sensor and Rear Camera In ^ 10 Function Buttons OK 2. Mode 3. Power 4. Up 5. Down 6. Menu Function Buttons 7. Micro USB Power Input 8. Micro SD Card Slot 9. AV-In 10. Indicator Light 11. Reset 12. Monitor 13. Rearview Mirror Menu: In video standby mode, press to enter menu and system menu setting. In the photograph mode, press to enter photograph menu and system menu setting. In the file playback mode, press to delete file and exit system menu settings. Mode Key: Under the video record standby mode, press to enter photograph mode. Click again to enter file playback mode. Press again to return to video standby mode. ON/OFF: Press to turn on the unit. Hold down for 3 seconds to turn off. Press to enter screen save mode. Press any button to awaken the screen. Up: In the menu setting and file select mode, press to select up. In standby mode, press to select view on screen of front camera, rear camera or front & rear cameras. Down: In the menu setting and file select mode, press to select down. Press to select option to record front camera, rear camera or front & rear cameras. OK: In standby mode, press to start recording. Press again to stop recording. In menu setting and file playback mode, press to enter or play the file. In photo mode, photograph shutter function. Used to confirm a menu selection. 2.

3 Function Buttons continued... Micro SD Card Slot: Put a Micro SD card (not supplied) into the slot with the pin surface facing down. A click sound will be heard. Reset: In any mode of power on, click to restart the unit. All settings will restore to factory defaults. Menu Function USB Mode: There are three modes when the unit is connected to a computer 1. USB_Disk: This allows user to transfer data from an SD card to the computer. 2. PC_Camera: This allows the DVR1553K to be used as a webcam. 3. RC_Mode: This allows the DVR1553K to be used as a video recorder. Resolution: You can set the quality of video recording and digital photographs. The resolution for video recordings are VGA (640*480P) & 1080P (1920*1080P). The resolution for digital photography is 1 megapixel (1280*960), 2 megapixels (1600*1200) & 3 megapixels (2048*1536). Lower resolutions allow for more videos or images to be stored but the quality is less. Higher resolution requires larger storage capacity, but the image quality should be better. Recording Time: The recording time can be set to record in 1, 2 and 5 minute increments. Recording Mode: This allows the choice of selecting front camera only, rear camera only or front & rear camera recording options. Settings In this area, you can select the following options: Brightness: To vary the effect of white light. There are 5 different options: Automatic, sunny, flourescent, cloudy & incandecent light. Exposure: To adjust the lighting strength. There are 6 different options: -3, -2, -1, 0, 1, 2, 3. Colour: To adjust the appearence of the video and picture. There are 5 different options: Standard, monchrome, negative, retro, green. Watermark: To select imprinting the time on the pictures and video. Auto Detect: To assure that the camera can detect movement and begin recording. This is helpful when vehicle is parked. Auto Recording: This unit will begin recording as soon as the car is turned on. 3.

4 Settings continued... Language: There are 6 different options: English, Chinese Traditional, Chinese Simplified, Korean, Japanese and Russian. Frequency: To select various light frequencies. There are 2 different options: 50Hz and 60Hz. Voice Recording: To select either record with or without sound. NOTE: While the unit is recording, press MODE button to switch on or off. Auto Off: The unit will power down when car is turned off. There are 5 delay options: 30 seconds, 45 seconds, 1 minute, 2 minutes and 5 minutes. Saver Setting: Screen will power off after a specified time. There are 6 options: Immediately, 15 seconds, 30 seconds, 45 seconds, 1 minute and 2 minutes. G-Sensor: This is Gravity Sensing. The unit can sense an accident. There are 3 options: High, Medium and Low. Date Set: To set the clock manually. Format: To format all data on the SD Card. You will be prompted to confirm your decision with YES or NO. Default Set: The unit can be reset to the original settings. Use this option when all functions freeze or there are errors. Software Version: This will outline the current software version in use. Record: Insert card and turn on the unit. It will automatically record and the blue indicator will flash. Click the OK button to stop recording. The green indicator will always stay on. Photograph: In video standby mode, press the MODE button to enter photograph mode. Press the OK button to take a photo and save. File Playback: In standby mode, press the MODE button twice to enter the file playback mode. Press UP/ DOWN button to select file. Press OK button to open the file, then press the OK button to play the file. Press the UP/DOWN button to go forward or backward. SOS: In normal video recording, press the MENU button to save the current file and make sure the file is protected and not recorded over. The screen will show a lock symbol. HDMI: In standby mode, connect it to TV or other video signal (the signal source should be set to video). The TV screen will show file selection play mode. 4.

5 Cycle Recording This operation can be set for cycle recording from the video menu (eg: 5 minutes). Each video can be saved every 5 minutes. When the card is full, it will record over any unprotected file according to the principle of first in, first out. eg: Set up loop recording for 5 minutes: Press the MENU button to enter menu mode. Use the UP/DOWN buttons to select cycle recording. Press OK button to enter cycle mode selection - ( close: 1 minute, 2 minutes, 5 minutes are available). Select 5 minutes by using the UP/DOWN button. Then press the OK button to return to main menu. Press the MENU button to return to standby mode. Battery Charging The red indicator will be on when plugged into an external power supply. This indicates that the battery is being charged. When the red indicator light glows darker, the battery has been fully charged. The battery symbol display will show in the upper right corner of the screen. Note: When the unit stops working, use a small pointed object to press the RESET button. The unit should restore to factory settings. 5.

6 Rearview Camera System Operation Attention: 1. Please use power adapter supplied. Substitute adapters may damage the unit. 2. Do not operate in damp or high temperature environments. 3. Please keep the lens clean for clear camera resolution. 4. Please strictly abide by relevant state laws for operating this device in an automobile. General: This DVR/Rearview system discreetly clips over the existing mirror of the vehicle with the forward facing camera capturing images of the road ahead. Also, the independant rear camera will display events behind the vehicle when reverse gear is selected. In addition to recording, this provides a clear image for the driver and protects children, pedestrians etc from injury and avoids costly repairs for dents and other damage when reversing. Parking Camera: The DUAL HEAD system included with your purchase allows for flexible installation options, either surface mount (eg number plate or boot lid) or stealth insert mount (eg bumper). The video cable simply connects with the mirror monitor supplied. CAUTION: Carefully check the +/- wiring sequence during installation. Ensure safety when installing wires near the fuel tank. Installation: Monitor Installation 1) Simply clip over the original mirror. 2) Carefully run wiring loom around windscreen or hood lining. 3) Connect rear camera extension cable (3.5mm plug) to input on mirror monitor. 4) Connect Cig Power Plug to monitor. Note: Cig Power Plug can connect to any matching 12 or 24V socket. As this power plug contains circuitry to reduce voltage to DC 5V, DO NOT CUT OFF. Rear Camera Installation 1) Determine installation location (usually the centre-rear of vehicle). a) Butterfly Type - Mount on surface using double-sided tape or screws. b) Insert Type - Carefully drill hole in bumper and insert camera. 4) Connect RED cable to 12V+ power cable of Reversing Light circuit. (If 24V vehicle, a power adaptor will be required) 5) Connect BLACK cable to ground. 6) Connect 6m signal extension cable to monitor. 6.

Mounting Heads: See diagram below: Cable Connections: See wiring

7 Rearview Camera System Operation continued... Camera Assembly Options: The C20A Camera is supplied with Dual Mounting Heads: See diagram below: Cable Connections: See wiring diagram below: Video Cable Mirror Monitor Connections: See wiring diagram below: Mini USB Input 7.

8 DVR1543K

DVR101 HD DASH CAM & 12MP CAMERA

DVR101 HD DASH CAM & 12MP CAMERA GENERAL - Display: 3 HD LCD - Chipset: Novatek 96223 - Image Sensor: SC1143, 1.0M CMOS - Outputs: USB - PC Interface: USB - Power Supply: 12/24V Cig. Lead Charger - Input