Telephony Multi-Taps. 9000T-TP Series

Transcription

1 9000T-TP Series The 9000T-TP series 1 GHz twisted-pair power multi-tap taps off part of its input RF and AC, but lets the rest pass through. It divides the tapped-off signal and power into multiple outputs, supplying RF for video, voice, and data. The AC for network-powered telephone or data circuits is supplied by the twisted pair terminals. Continuous RF signal and AC power bypass circuit eliminates downstream service interruptions when faceplates are removed. Tel Spot reflective indicator allows easy identification of telephone-ready taps from ground level. Easily accessible plug-in current limiters and twisted-pair connectors. Water seal and strain relief for the out jacket of twisted pair cables. A multi-tap is a combination of a directional coupler and splitters arranged to produce a specific value or signal loss from the multi-tap s input to its tap ports. The Philips 9000T-TP series 1 GHz multi-taps provide RF signal on the coax drop and AC power passing on the twisted-pair connectors, with 15 watts-per-port power passing capacity at 60 VAC and 25 watts-per-port at 90 VAC. The 9000T-TP series is available in two-port, four-port, and eight-port models. The aluminum die-cast housing is pressure tested to 10 psi and is coated with a protective finish for excellent corrosion resistance. Separate RFI and weather gaskets work together to keep signals pure and protect circuitry from harsh environments. Rubber boots inside the brass SCTE F-ports help keep the 9000T-TP series multi-taps water-tight. A single alloy at contact points eliminates the galvanic couple and corrosion that accompanies aluminum-to-brass connections. Connecting the brass SCTE F-port to a brass F-connector can eliminate a weak link in your network. All F-ports come with a capacitor to block hum modulation that can originate from the subscriber home. This capacitor also provides additional protection from transients traveling on drop cables. Finally, these taps provide AC power passing over the twisted pair wires via 9000T-CL-STRAIGHT plug-in current limiters. Ordered separately, the plug-in current limiting devices protect the tap from short circuits in the powered twisted-pair. These devices automatically reset when the short is removed. And, the external plug-in feature makes it easy to install or remove AC power on each powered twisted-pair. All 9000T-TP series multi-taps share the following standard features: 1 GHz bandwidth capacity; rotating seizures; 2.5 kv surge resistance, which meets ANSI/IEEE C , Class B, 2500 V surge; and 12-Amp current handling capability. 3 June

2 Worst Case Specifications 9800T-TP 8-Way Series Units Tap Value db Bandwidth 10 to 1000 MHz Color Code Gold White Blue Green Purple Yellow Red Silver Brown Tolerance 10 to 19 MHz ± db 20 to 899 MHz ± db 900 to 1000 MHz ± db Insertion Loss (in-out, maximum) 10 MHz db 30 MHz db 50 MHz db 100 MHz db 330 MHz db 450 MHz db 550 MHz db 600 MHz db 750 MHz db 862 MHz db 1000 MHz db Flatness (maximum) 10 to 1000 MHz ± db Tap-to-Out Isolation (minimum) 10 to 29 MHz db 30 to 749 MHz db 750 to 899 MHz db 900 to 1000 MHz db Tap-to-Tap Isolation (minimum) 10 to 29 MHz db 30 to 449 MHz db 450 to 749 MHz db 750 to 1000 MHz db Return Loss In (minimum) 10 to 29 MHz db 30 to 599 MHz db 600 to 899 MHz db 900 to 1000 MHz db continued June 2002

3 9800T-TP 8-Way Series Return Loss Out (minimum) 10 to 29 MHz db 30 to 599 MHz db 600 to 899 MHz db 900 to 1000 MHz db Return Loss Tap (minimum) 10 to 29 MHz db 30 to 599 MHz db 600 to 899 MHz to 1000 MHz db Hum 8 Amps (maximum) 10 to 49 MHz db 50 to 599 MHz db 600 to 749 MHz db 750 to 1000 MHz db RFI Isolation (minimum) 10 to 599 MHz db 600 to 1000 MHz db Continuous Current (maximum) Amps Voltage Passing Capacity (maximum) DC, AC up to 60 Hz V Twisted Pair Power Passing 60V (90V) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) W Surge Rating ANSI/IEEE C , Class B, 2500 V Units 3 June

4 Nominal Specifications 9800T-TP 8-Way Series Units Tap Value db Bandwidth 10 to 1000 MHz Color Code Gold White Blue Green Purple Yellow Red Silver Brown Insertion Loss (in-out, maximum) 10 MHz db 30 MHz db 54 MHz db 70 MHz db 112 MHz db 150 MHz db 186 MHz db 222 MHz db 330 MHz db 400 MHz db 450 MHz db 550 MHz db 600 MHz db 750 MHz db 862 MHz db 1000 MHz db Tap Loss 10 to 19 MHz db 20 to 899 MHz db 900 to 1000 MHz db June 2002

5 Worst Case Specifications 9400T-TP 4-Way Series Units Tap Value db Bandwidth 10 to 1000 MHz Color Code Orange Gold White Blue Green Purple Yellow Red Silver Brown Tolerance 10 to 19 MHz ± db 20 to 899 MHz ± db 900 to 1000 MHz ± db Insertion Loss (in-out, maximum) 10 MHz db 30 MHz db 50 MHz db 100 MHz db 330 MHz db 450 MHz db 550 MHz db 600 MHz db 750 MHz db 862 MHz db 1000 MHz db Flatness (maximum) 10 to 1000 MHz ± db Tap-to-Out Isolation (minimum) 10 to 29 MHz db 30 to 749 MHz db 750 to 1000 MHz db Tap-to-Tap Isolation (minimum) 10 to 29 MHz db 30 to 449 MHz db 450 to 749 MHz db 750 to 1000 MHz db Return Loss In (minimum) 10 to 29 MHz db 30 to 599 MHz db 600 to 899 MHz db 900 to 1000 MHz db continued 3 June

6 9400T-TP 4-Way Series Return Loss Out (minimum) 10 to 29 MHz db 30 to 599 MHz db 600 to 899 MHz db 900 to 1000 MHz db Return Loss Tap (minimum) 10 to 29 MHz db 30 to 599 MHz db 600 to 899 MHz db 900 to 1000 MHz db Hum 8 Amps (maximum) 10 to 49 MHz db 50 to 599 MHz db 600 to 749 MHz db 750 to 1000 MHz db RFI Isolation (minimum) 10 to 599 MHz db 600 to 1000 MHz db Continuous Current (maximum) Amps Voltage Passing Capacity (maximum) DC, AC up to 60 Hz V Twisted Pair Power Passing 60V (90V) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) W Surge Rating ANSI/IEEE C , Class B, 2500 V Units June 2002

7 Nominal Specifications 9400T-TP 4-Way Series Units Tap Value db Bandwidth 10 to 1000 MHz Color Code Orange Gold White Blue Green Purple Yellow Red Silver Brown Insertion Loss (in-out, maximum) 10 MHz db 30 MHz db 54 MHz db 70 MHz db 112 MHz db 186 MHz db 222 MHz db 330 MHz db 400 MHz db 450 MHz db 550 MHz db 600 MHz db 750 MHz db 862 MHz db 1000 MHz db Tap Loss 10 to 19 MHz db 20 to 899 MHz db 900 to 1000 MHz db 3 June

8 Worst Case Specifications 9200T-TP 2-Way Series Units Tap Value db Bandwidth 10 to 1000 MHz Color Code Black Orange Gold White Blue Green Purple Yellow Red Silver Tolerance 10 to 19 MHz ± db 20 to 899 MHz ± db 900 to 1000 MHz ± db Insertion Loss (in-out, maximum) 10 MHz db 30 MHz db 50 MHz db 100 MHz db 330 MHz db 450 MHz db 550 MHz db 600 MHz db 750 MHz db 862 MHz db 1000 MHz db Flatness (maximum) 10 to 1000 MHz ± db Tap-to-Out Isolation (minimum) 10 to 29 MHz db 30 to 749 MHz db 750 to 1000 MHz db Tap-to-Tap Isolation (minimum) 10 to 29 MHz db 30 to 449 MHz db 450 to 749 MHz db 750 to 1000 MHz db Return Loss In (minimum) 10 to 29 MHz db 30 to 599 MHz db 600 to 899 MHz db 900 to 1000 MHz db continued June 2002

9 9200T-TP 2-Way Series Return Loss Out (minimum) 10 to 29 MHz db 30 to 599 MHz db 600 to 899 MHz db 900 to 1000 MHz db Return Loss Tap (minimum) 10 to 29 MHz db 30 to 599 MHz db 600 to 899 MHz db 900 to 1000 MHz db Hum 8 Amps (maximum) 10 to 49 MHz db 50 to 599 MHz db 600 to 749 MHz db 750 to 1000 MHz db RFI Isolation (minimum) 10 to 599 MHz db 600 to 1000 MHz db Continuous Current (maximum) Amps Voltage Passing Capacity (maximum) DC, AC up to 60 Hz V Twisted Pair Power Passing 60V (90V) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) 15 (25) W Surge Rating ANSI/IEEE C , Class B, 2500 V Units 3 June

10 Nominal Specifications 9200T-TP 2-Way Series Specifications Units Tap Value db Bandwidth 10 to 1000 MHz Color Code Black Orange Gold White Blue Green Purple Yellow Red Silver Insertion Loss (in-out, maximum) 10 MHz db 30 MHz db 54 MHz db 70 MHz db 112 MHz db 150 MHz db 186 MHz db 222 MHz db 330 MHz db 400 MHz db 450 MHz db 550 MHz db 600 MHz db 750 MHz db 862 MHz db 1000 MHz db Tap Loss 10 to 19 MHz db 20 to 899 MHz db 900 to 1000 MHz db 9000T-TP Series Mechanical Dimensions (height x width x depth) a a. Height dimension includes plug; depth dimension includes strand clamp/bolt in closed position. b. Pin connector (0.067-inch diameter) is recommended for best RF performance. Units 17.8 x 13.7 x 8.9 (7.0 x 5.4 x 3.5) cm (in.) Weight 0.8 (1.72) kg (lbs.) Connector Type b Standard CATV KS entry connectors for cable up to inch diameter Pin Length 3.7 (1.44) cm (in.) Twisted Pair Wires #24 or #22 AWG, Solid Conductors, 1 or 2 pairs Twisted Pair Jacket (maximum outside diameter) 7.0 (0.276) mm (in.) June 2002

11 Ordering Information To order, call your sales representative. See the Introduction section for a list of Philips Broadband Networks Representatives. 9000T-TP Series 9 _ T TP 9000 Series (1 GHz bandwidth) Number of Tap Ports: 2, 4, or 8 db Value of Tap Loss Telephony Multi-taps Twisted Pair Power (see Accessory named below) Model 9800T-TP series 9400T-TP series 9200T-TP series Description Eight-way multi-taps. Models includes faceplate and housing castings, tap PC board, and 9000T-PWR power bypass assembly installed at the factory. Available in these db values: 12, 15, 18, 21, 24, 27, 30, 33, and 36. Four-way multi-taps. Models includes faceplate and housing castings, tap PC board, and 9000T-PWR power bypass assembly installed at the factory. Available in these db values: 8, 11, 14, 17, 20, 23, 26, 29, 32, and 35. Two-way multi-taps. Models includes faceplate and housing castings, tap PC board, and 9000T-PWR power bypass assembly installed at the factory. Available in these db values: 4, 8, 11, 14, 17, 20, 23, 26, 29, and 32. The following accessory is also available for use in the 9000T-TP Series telephony multi-taps: 9000T-CL-STRAIGHT plug-in current limiter with straight leads See RF Passives Accessories on page 437 of this catalog for more information. 3 June

12 398 3 June 2002