QN9080 QN908x RF Certification Guide
|
|
|
- Janel Philomena Fowler
- 5 years ago
- Views:
Transcription
1 QN9080 Rev March 2019 Application note Document information Info Keywords Abstract Content QN908x, BLE, Generic FSK, FCC/CE Certification This Application note describe FCC/CE certification test using the QN908X Evaluation boards for BLE module and Generic FSK module.
2 Revision history Rev Date Description Initial revision Changed the Application Note name from QN908x Test Guide for RF Certification to Contact information For more information, please visit: All information provided in this document is subject to legal disclaimers. N.V All rights reserved. Application note Rev. <2> March 11, of 11
3 Content 1. Introduction Test Setup GFSK project introduction Test Setup Hardware...5 Test Setup Software Test Preparation Test items and options Test Cases TX with modulation...9 TX with no modulation Legal information...11
4 1. Introduction QN908x is an ultra-low power BLE wireless MCU, based on which the product operated with the frequency within the ISM band. According to the regulatory of each region, certification is mandatory for these kinds of RF products. The test is FCC/CE certification in US and EU areas. There is similar certification requirement in other areas. The Generic FSK project inside of QN908x SDK is designed for the purpose. All information provided in this document is subject to legal disclaimers. N.V All rights reserved. Application note Rev. <2> March 11, of 11
5 2. Test Setup 2.1 GFSK project introduction GFSK is a modulation method adopted by Bluetooth SIG for BLE, based on which the BLE link layer defines the packet format for devices to communicate with each other. For the devices not implemented, the BLE link layers communicate to each other with self-defined packet format. GFSK project is designed for such purpose. The GFSK project supports burst/continuous and modulated/unmodulated modes for data transferring, which make it appropriate for RF certification Test Setup Hardware Requirements: - NXP s QN9080 DK - Micro USB cable - Personal computer with a COM port terminal installed As shown in Figure 1, connect the USB port (J2) of QN9080 DK with PC USB port by the USB cable. Figure 1 Hardware Connection Once QN9080 DK is plugged in, corresponding COM port can be seen in Device Manager as shown in Figure 2. Figure 2 COM port in Device Manager All information provided in this document is subject to legal disclaimers. N.V All rights reserved. Application note Rev. <2> March 11, of 11
6 2.1.2 Test Setup Software Requirements: - IDE: KEIL, IAR or MCUXpresso. - Firmware project: connectivity_test project under QN9080 SDK folder ( \SDK\boards\qn908xcdk\wireless_examples\genfsk\connectivity_test). - Test Tool: PuTTY or another terminal tool Test Preparation 1. Test firmware downloading into QN9080 DK Refer to the following the procedure below to compile and download firmware: a) Open the project connectivity_test from the following folder \SDK\boards\qn908xcdk\wireless_examples\genfsk\connectivity_t est\ by any of the three supported IDE b) Compile the project by clicking the Compiling button c) Download the firmware into the QN9080 DK d) Press the Reset button(sw3) on QN9080 DK to run the firmware. 2. COM port terminal a) Open COM port terminal on your computer. b) Select the correct setting for the COM port. Taking Putty as an example, COM port setting is shown in Figure 2: All information provided in this document is subject to legal disclaimers. N.V All rights reserved. Application note Rev. <2> March 11, of 11
7 Figure 3. COM Port Setting 3. Test items and options The GFSK project uses COM port terminal as commands console to control the operations of QN9080 DK. After setup completes successfully, open Putty with the correct settings, and press the Reset Button (SW3) The output is shown as the Figure 4. Figure 4 Initialization Output All information provided in this document is subject to legal disclaimers. N.V All rights reserved. Application note Rev. <2> March 11, of 11
8 Press the Enter key, the main menu is shown as in Figure 5 with all the options and test items. There are eight options and four test items totally. 1. Test items Figure 5 Main menu Among the four test items, the first one is often used for RF certification test. There are seven sub items supported by the GFSK project for first test item, which is shown as Figure Test options: a) TX/RX [t]: used to choose TX test [r]: used to choose RX test This option allows you to select the appropriate operation for the test. The default mode is RX test. b) Channel change [q]: used for channel up [w]: used for channel down The QN908x can configured to use any channel frequency between and 2.480GHz with each channel frequency interval 2MHz. c) TX power [a]: used for power up [s]: used for power down This parameter used to adjust the TX power when QN908x in TX operation. The default TX power is power 8. Table2 TX Power Number TX Power(dBm) Number TX Power(dBm) All information provided in this document is subject to legal disclaimers. N.V All rights reserved. Application note Rev. <2> March 11, of 11
9 0 < d) Payload length [n]: used to increase payload [m]: used to decrease payload This parameter specifies the payload length in one packet of QN9080. The default payload length is 16, the max payload length supported is Test Cases 4.1 TX with modulation The case is used when the test requirement required the signal over the air is with data modulated. The TX with modulation can be implemented according to the following steps: a) Press [t] to choose TX test. b) Select TX channel by option [q] or [w]. (channel 1 for 2402MHz test, channel 39 for 2440MHz test, channel 79 for 2480MHz test). c) Select TX power by option [a] or [s]. The default TX power is 0dBm. d) Select test cases shown in Figure 7, per requirement on data pattern and the continuous/burst mode. [5] is chosen, for example. e) The test is started. f) Press [1] to end the test. All information provided in this document is subject to legal disclaimers. N.V All rights reserved. Application note Rev. <2> March 11, of 11
10 4.2 TX with no modulation Figure 7 Test Menu The case is used when the test requirement required the signal over the air is with no data modulated. The TX with modulation can be implemented according to the following steps: g) Press [t] to choose TX test. h) Select TX channel by option [q] or [w]. (channel 1 for 2402 MHz test, channel 39 for 2440 MHz test, channel 79 for 2480 MHz test). i) Select TX power by option [a] or [s]. The default TX power is 0dBm. j) Select test cases shown in Figure 7, per requirement on data pattern and the continuous/burst mode. [6] is chosen, for example. k) The test is started. l) Press [1] to end the test. Note: The two cases above illustrate how to choose test items and set options. Generate your test cases with the test items and options per the RF certification requirements. All information provided in this document is subject to legal disclaimers. N.V All rights reserved. Application note Rev. <2> March 11, of 11
11 5. Legal information How to Reach Us: Home Page: nxp.com Web Support: nxp.com/support Information in this document is provided solely to enable system and software implementers to use NXP products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. NXP reserves the right to make changes without further notice to any products herein. NXP makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does NXP assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in NXP data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including typicals, must be validated for each customer application by customer s technical experts. NXP does not convey any license under its patent rights nor the rights of others. NXP sells products pursuant to standard terms and conditions of sale, which can be found at the following address: nxp.com/salestermsandconditions. While NXP has implemented advanced security features, all products may be subject to unidentified vulnerabilities. Customers are responsible for the design and operation of their applications and products to reduce the effect of these vulnerabilities on customer s applications and products, and NXP accepts no liability for any vulnerability that is discovered. Customers should implement appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP, the NXP logo, NXP SECURE CONNECTIONS FOR A SMARTER WORLD, COOLFLUX, EMBRACE, GREENCHIP, HITAG, I2C BUS, ICODE, JCOP, LIFE VIBES, MIFARE, MIFARE CLASSIC, MIFARE DESFire, MIFARE PLUS, MIFARE FLEX, MANTIS, MIFARE ULTRALIGHT, MIFARE4MOBILE, MIGLO, NTAG, ROADLINK, SMARTLX, SMARTMX, STARPLUG, TOPFET, TRENCHMOS, UCODE, Freescale, the Freescale logo, AltiVec, C 5, CodeTEST, CodeWarrior, ColdFire, ColdFire+, C Ware, the Energy Efficient Solutions logo, Kinetis, Layerscape, MagniV, mobilegt, PEG, PowerQUICC, Processor Expert, QorIQ, QorIQ Qonverge, Ready Play, SafeAssure, the SafeAssure logo, StarCore, Symphony, VortiQa, Vybrid, Airfast, BeeKit, BeeStack, CoreNet, Flexis, MXC, Platform in a Package, QUICC Engine, SMARTMOS, Tower, TurboLink, and UMEMS are trademarks of NXP B.V. All other product or service names are the property of their respective owners. AMBA, Arm, Arm7, Arm7TDMI, Arm9, Arm11, Artisan, big.little, Cordio, CoreLink, CoreSight, Cortex, DesignStart, DynamIQ, Jazelle, Keil, Mali, Mbed, Mbed Enabled, NEON, POP, RealView, SecurCore, Socrates, Thumb, TrustZone, ULINK, ULINK2, ULINK-ME, ULINK-PLUS, ULINKpro, µvision, Versatile are trademarks or registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere. The related technology may be protected by any or all of patents, copyrights, designs and trade secrets. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org NXP B.V. Please be aware that important notices concerning this document and the product(s) described herein, have been included in the section 'Legal information'. NXP B.V All rights reserved. For more information, visit: Date of release: 11 March 2019 Document identifier:
IMXPINSQSUG Quick Start Guide on Pins Tool for i.mx Processors
IMXPINSQSUG Quick Start Guide on Pins Tool for i.mx Processors Rev. 2 28 October 2018 User's Guide 1 Introduction Pins Tool for i.mx processors is intended to be used for configuration of NXP i.mx Cortex-A
i.mxrt1060 Product Lifetime Usage Estimates
NXP Semiconductors Document Number: AN12253 Application Notes Rev. 0, 09/2018 i.mxrt1060 Product Lifetime Usage Estimates Introduction This document describes the estimated product lifetimes for the i.mx
i.mx 6ULZ Migration Guide
NXP Semiconductors Document Number: AN12264 Application Note Rev. 0, 10/2018 i.mx 6ULZ Migration Guide Migrating from i.mx 6ULL to i.mx 6ULZ 1. Introduction This application note provides an introduction
S12Z MagniV LIN Bootloader
NXP Semiconductors Document Number: AN5389 Application Note Rev. 0, 02/2017 S12Z MagniV LIN Bootloader by: Agustin Diaz 1 Introduction The LIN protocol is a 1-wire serial protocol and uses the UART format
IMXPINSQSUG Pins Tool for i.mx Processors Installation User's Guide
IMXPINSQSUG Pins Tool for i.mx Processors User's Guide Rev. 2 28 October 2018 User's Guide 1 Introduction The Pins Tool for i.mx Processors is a tool that helps guide users from first evaluation to production
How to Reduce SoC Power when Running M4 with A53 on i.mx8m
NXP Semiconductors Document Number: AN12225 Application Note Rev. 0, 07/2018 How to Reduce SoC Power when Running M4 with A53 on i.mx8m 1. Introduction On i.mx8m EVK board, when user measures current with
Using VRC_CTL to Control an External VDD_LV Supply on the MPC5748G
NXP Semiconductors Document Number: AN5290 Application Note Rev. 0, 06/2016 Using VRC_CTL to Control an External VDD_LV Supply on the MPC5748G by: Alasdair Robertson 1 Introduction The MPC5748G MCU is
Exception and fault checking on S32K1xx
NXP Semiconductors Document Number: AN12201 Application Notes Rev. 0, 07/2018 Exception and fault checking on S32K1xx by: NXP Semiconductors 1. Introduction The S32K1xx product series further extends the
Migrating Applications from MC9S12VR64 to MC9S12VR32 by: Manuel Rodríguez
NXP Semiconductors Document Number: AN5091 Application Note Rev. 1, 08/2016 Migrating Applications from MC9S12VR64 to MC9S12VR32 by: Manuel Rodríguez Contents 1. Introduction This application note is intended
S32K1xx Bootloader. 1. Introduction. 2. Architecture description. NXP Semiconductors. Application Notes Rev. 1, 10/2018. Contents
NXP Semiconductors Document Number: AN12218 Application Notes Rev. 1, 10/2018 S32K1xx Bootloader by: NXP Semiconductors 1. Introduction The following document describes the architecture and usage of the
Differences Between S32K11x and S32K142
NXP Semiconductors Document Number: AN11997 Application Note Rev. 3, July 2018 Differences Between S32K11x and S32K142 by: NXP Semiconductors 1 Introduction This application note shows the differences
Using MCUXpresso SDK CAN and LIN Drivers to Create a Bluetooth LE-CAN and Bluetooth LE-LIN Bridges on KW36/KW35
NXP Semiconductors Document Number: AN12273 Application Note Rev. 1, 11/2018 Using MCUXpresso SDK CAN and LIN Drivers to Create a Bluetooth LE-CAN and Bluetooth LE-LIN Bridges on KW36/KW35 1. Introduction
Using the PASS module in MPC5748G to implement password-based protection for flash and debugger access
NXP Semiconductors Document Number: AN12092 Application Note Rev. 0, February, Using the PASS module in MPC5748G to implement password-based protection for flash and debugger access by: NXP Semiconductors
S32R RADAR Signal Compression
NXP Semiconductors Document Number: AN5375 Application Note Rev. 1, September 2017 S32R RADAR Signal Compression Feature description and guidelines for using signal compression by: NXP Semiconductors 1
Production Flash Programming Best Practices for S32K1xx MCUs
NXP Semiconductors Production Flash Programming Best Practices for S32K1xx MCUs Document Number: AN12130 Application Note Rev. 0, February 2018 by: NXP Semiconductors 1 Introduction This application note
Tampering Application for i.mx7dsabresd
NXP Semiconductors Document Number: AN12210 Application Note Rev. 0, 07/2018 Tampering Application for i.mx7dsabresd 1. Introduction External Tamper Detection is a special mechanism provided through a
etpu library usage in an application
NXP Semiconductors Document Number: AN5374 Application Notes Rev. 0, 12/2016 etpu library usage in an application Covers all Automotive MCUs with etpu, etpu2 and etpu2+ by: Marketa Venclikova 1. Introduction
Window Lift and relay based DC motor control Reference Design Using the S12VR(P)
Window Lift and relay based DC motor control Reference Design Using the S12VR(P) Document Number: DRM160 Rev. 2, 08/2018 2 NXP Semiconductors Contents Section number Title Page Chapter 1 Overview 1.1 Overview...5
S32 Design Studio for ARM v2.0
NXP Semiconductors Document Number: S32DSARM2.0 Release Notes Rev. 2.0, 08/2017 S32 Design Studio for ARM v2.0 1. Release description Freescale, a subsidiary of NXP Semiconductors, is pleased to announce
Migration Guide from MKW36Z512xxx4 to MKW35Z512xxx4
NXP Semiconductor. Document Number: AN12252 User's Guide Rev. 0, 09/2018 Migration Guide from MKW36Z512xxx4 to MKW35Z512xxx4 1. Introduction This document describes how to migrate from Kinetis MKW36Z512xxx4
Modular Gateway Hardware User's Guide
NXP Semiconductors Document Number: MGHWUG User's Guide Rev 0, 10/2016 Modular Gateway Hardware User's Guide Contents Contents Chapter 1 Introduction...3 Chapter 2 Specification... 5 Chapter 3 Contents
Window Lift and relay based DC motor control Reference Design Using the S12VR
Window Lift and relay based DC motor control Reference Design Using the S12VR Document Number: DRM160 Rev. 1.1, 08/2016 2 NXP Semiconductors Contents Section number Title Page Chapter 1 Overview 1.1 Overview...
S32 Design Studio for Vision 2.0
NXP Semiconductors Document Number: S32DSVISION2.0 Release Notes Rev. 2.01, 09/2017 S32 Design Studio for Vision 2.0 1. Release description Freescale, a subsidiary of NXP Semiconductors, is pleased to
Simple Serial Bootloader for S12Z
NXP Semiconductors Document Number: AN12086 Application Note Rev. 1, February, 2018 Simple Serial Bootloader for S12Z by: NXP Semiconductors 1 Introduction This application note covers the operation and
Enhanced Features in i.mx RT1060
NXP Semiconductors Document Number: AN12240 Application Notes Rev. 0, 09/2018 Enhanced Features in i.mx RT1060 1. Introduction The i.mx RT1060 is the latest addition to the industry's first crossover processor
S32 Design Studio for Power Architecture 2017.R1
NXP Semiconductors Document Number: S32DSPA2017.R1 Release Notes Rev. 1.0, 10/2017 S32 Design Studio for Power Architecture 2017.R1 1. Release description Freescale, a subsidiary of NXP Semiconductors,
EEPROM Emulation with Qorivva MPC55xx, MPC56xx, and MPC57xx Microcontrollers
NXP Semiconductors Document Number: AN4868 Application Note Rev. 2, 03/2017 EEPROM Emulation with Qorivva MPC55xx, MPC56xx, and MPC57xx Microcontrollers by: David McDaid 1 Introduction Electrically Erasable
Freescale MKW40Z IEEE Software Quick Start Guide
Freescale Semiconductor, Inc. Document Number: MKW40Z802154SW523QSG User's Guide Rev. 0, 09/2015 Freescale MKW40Z IEEE 802.15.4 Software Quick Start Guide This document is a brief presentation of the Freescale
MIMXRT1060 Evaluation Kit Board Hardware User's Guide
NXP Semiconductors User's Guide Document Number: UM11151 MIMXRT1060 Evaluation Kit Board Hardware User's Guide 1 Introduction This document describes MIMXRT1060 Evaluation Kit (EVK) based on the i.mx RT1060
Power Architecture e200z4 and e200z7 Core Memory Protection Unit (CMPU)
NXP Semiconductors Document Number: AN12177 Application Notes Rev. 0, 04/2018 Power Architecture e200z4 and e200z7 Core Memory Protection Unit (CMPU) by: NXP Semiconductors 1. Introduction This application
Component Development Environment Getting Started Guide
Component Development Environment Getting Started Guide Document Number: CDEGS Rev 02/2014 2 Freescale Semiconductor, Inc. Contents Section number Title Page Chapter 1 Introduction 1.1 Overview...5 1.2
P1010RDB-PB Quick Start Guide
Freescale Semiconductor P1010RDB-PB Quick Start Guide Document Number: P1010RDBPBQS Rev. 0, 10/2013 P1010RDB-PB Quick Start Guide 1 Introduction to P1010RDB-PB This quick start guide applies to boards
S32R372141EVB User Guide
NXP Semiconductors Document Number: S3R374EVBUG User Guide Rev. 0, 08/08 S3R374EVB User Guide by : NXP Semiconductors. Introduction This user guide details the setup and configuration of the NXP S3R37x
Power Management for S32K14x
NXP Semiconductors Document Number: AN5425 Application Note Rev 0, 03/2017 Power Management for S32K14x by: NXP Semiconductors 1 Introduction The power consumption of devices and the implications around
OpenSDA on TWR-KW2x. User s Guide Rev 1.1
OpenSDA on TWR-KW2x User s Guide 2013 Rev 1.1 Freescale, Inc. TKW2x_OSDAUG Table of Contents 1 Overview...3 1.1 OpenSDA Hardware...4 1.2 OpenSDA Software...4 1.2.1 MSD Bootloader...4 1.2.2 P&E Debug Application...5
AN12282 Digital Signal Processing for NXP LPC5500 Using PowerQuad
AN12282 Digital Signal Processing for NXP LPC5500 Using PowerQuad Rev. 0 24 January 2019 Application Note 1 PowerQuad introduction Mobile IoT and Context awareness are growing tremendously and more local
Initializing the MPC574xP Clock Generation Module and Progressive Clock Switching Feature
NXP Semiconductors Document Number: AN534 Application Note Rev. 2, Initializing the MPC574xP Clock Generation Module and Progressive Clock Switching Feature by: NXP Semiconductors 1 Introduction The MPC574xP
Mask Set Errata for Mask 2N27B
Freescale Semiconductor COLDFIREPLUS_2N27B Mask Set Errata Rev 29 JUL 2013 Mask Set Errata for Mask 2N27B Introduction This report applies to mask 2N27B for these products: COLDFIREPLUS Errata ID Errata
S32V234: Clock Programming Considerations
NXP Semiconductors S32V234: Clock Programming Considerations Document Number: AN12087 Application Note Rev. 0, November 2017 by: NXP Semiconductors 1 Introduction This application note highlights the basic
Quick Start Guide for FRDM-KL05Z
Quick Start Guide for FRDM-KL05Z Contents: Quick Start Package Overview Get to Know the FRDM-KL05Z Getting Started Out of the Box Introduction to OpenSDA Explore Further www.freescale.com/frdm-kl05z 1
Quick Start Guide for FRDM-KL46Z Rev 1
www.freescale.com/frdm-kl46z These documents are available as part of the Quick Start Package: Name Type Description Quick Start Guide PDF This document OpenSDA Applications Folder OpenSDA Applications
Quick Start Guide for the Freescale Freedom Development Platform FRDM-KL43Z
Quick Start Guide for the Freescale Freedom Development Platform FRDM-KL43Z External Use Contents ts Quick Start Package Overview GettoKnowtheFRDMKL43Z to the FRDM-KL43Z Getting Started Out of the Box
New VLE Instructions for Improving Interrupt Handler Efficiency Robert Moran Applications Engineer Microcontroller Solutions Group
Freescale Semiconductor Engineering Bulletin Document Number: EB696 Rev. 0, 07/2008 New VLE Instructions for Improving Interrupt Handler Efficiency by: Robert Moran Applications Engineer Microcontroller
Software Solutions for Migration Guide from Aarch32 to Aarch64
NXP Semiconductors Document Number: AN12212 Application Note Rev. 0, 07/2018 Software Solutions for Migration Guide from Aarch32 to Aarch64 1. Introduction This document applied to i.mx 8 series chips.
Quick Start Guide for FRDM-KL46Z Rev 1
www.freescale.com/frdm-kl46z These documents are available as part of the Quick Start Package: Name Type Description Quick Start Guide PDF This document OpenSDA Applications Folder OpenSDA Applications
S12VR Hardware Design Guidelines
NXP Semiconductors Document Number: AN4643 Application Note Rev. 3, 10/2016 S12VR Hardware Design Guidelines by: Jesus Sanchez and Manuel Rodriguez 1 Introduction This document lists the required external
i.mx 7 Dual/Solo Product Lifetime Usage
NXP Semiconductors Document Number: AN5334 Application Note Rev. 1, 05/2017 i.mx 7 Dual/Solo Product Lifetime Usage 1. Introduction This document describes the estimated product lifetimes for the i.mx
S32K1xx ADC guidelines, spec and configuration
NXP Semiconductors Document Number: AN12217 Application Notes Rev. 0, 08/2018 S32K1xx ADC guidelines, spec and configuration by: NXP Semiconductors 1. Introduction NXP S32K1xx automotive microcontroller
i.mx 8QuadXPlus MEK Board Hardware User's Guide
NXP Semiconductors Document Number:IMX8QXPMEKHUG User's Guide Rev. 0, 11/2018 i.mx 8QuadXPlus MEK Board Hardware User's Guide 1. Introduction This document is the Hardware User s Guide for the i.mx 8QuadXPlus
KW41Z IEEE and BLE Coexistence Performance
NXP Semiconductors Document Number: AN12231 Application Note Rev. 0, 08/2018 KW41Z IEEE 802.15.4 and BLE Coexistence Performance MWS module 1. About this manual This document aims to evaluate the performance
QCVS Frame Distributor Wizard User Guide
QCVS Frame Distributor Wizard User Guide Document Number: QCVSFDWUG Rev. 4.3, 07/2015 2 Freescale Semiconductor, Inc. Contents Section number Title Page Chapter 1 Frame Distributor Wizard 1.1 Introduction...5
Mask Set Errata for Mask 2N14W
NXP Semiconductors IMX8MDQLQ_2N14W Mask Set Errata Rev. 0, 10/2018 Mask Set Errata for Mask 2N14W This report applies to mask 2N14W for these products: MIMX8MQ7CVAHZAB MIMX8MQ6CVAHZAB MIMX8MD7CVAHZAB MIMX8MD6CVAHZAB
CodeWarrior Development Studio for Advanced Packet Processing v10.3.1
NXP Semiconductors Release Notes Document Number: CW-APP-RN CodeWarrior Development Studio for Advanced Packet Processing v10.3.1 NXP Semiconductors 1. Revision History The following modifications to this
i.mxrt1050 Product Lifetime Usage Estimates
NXP Semiconductors Document Number: AN12170 Application Note Rev. 0, 04/2018 i.mxrt1050 Product Lifetime Usage Estimates 1. Introduction This document describes the estimated product lifetimes for the
Getting Started with the MCU Flashloader
NXP Semiconductors Document Number: MBOOTFLASHGS User's Guide Rev 3, 05/2018 Getting Started with the MCU Flashloader Contents Contents Chapter 1 Introduction...3 Chapter 2 Overview...4 2.1 MCU flashloader...4
i.mx 6ULL Product Usage Lifetime Estimates
NXP Semiconductors Document Number: AN5337 Application Note Rev. 1, 03/2017 i.mx 6ULL Product Usage Lifetime Estimates 1. Introduction This document describes the estimated product lifetimes for the i.mx
CodeWarrior U-Boot Debugging
Freescale Semiconductor Application Note Document Number: AN4876 CodeWarrior U-Boot Debugging 1. Introduction This document describes the steps required for U-Boot debugging using the CodeWarrior IDE.
Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, ColdFire+, C-Ware, the Energy Efficient Solutions logo, Kinetis,
Dr. Stephen Rober Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, C-Ware, t he Energy Efficient Solutions logo, mobilegt, PowerQUICC, QorIQ, StarCore and Symphony are trademarks
Building U-Boot in CodeWarrior ARMv8
NXP Semiconductors Document Number: AN5347 Application Note Rev. 0, 10/2016 Building U-Boot in CodeWarrior ARMv8 1 Introduction This application note defines guidelines for configuring CodeWarrior for
Getting Started with MCUXpresso SDK CMSIS Packs
NXP Semiconductors Document Number: MCUXSDKPACKSGSUG User's Guide Rev. 1, 11/2017 Getting Started with MCUXpresso SDK CMSIS Packs 1 Introduction The MCUXpresso Software Development Kit (SDK) is a comprehensive
Getting Started with Freescale MQX RTOS for Kinetis SDK and MDK-ARM Keil
Freescale Semiconductor, Inc. Document Number: KSDKGSKEILUG User s Guide Rev. 1, 04/2015 Getting Started with Freescale MQX RTOS for Kinetis SDK and MDK-ARM Keil µvision5 1 Read Me First This document
Configure QSPI Bus Width and Frequency in Pre-Boot Loader Stage on QorIQ LS Series Processors
NXP Semiconductors Document Number: AN12279 Application Note Rev. Configure QSPI Bus Width and Frequency in Pre-Boot Loader Stage on QorIQ LS Series Processors 1 Introduction When QSPI is selected as the
Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, C-Ware, the Energy Efficient Solutions logo, mobilegt, PowerQUICC,
March 2013 Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, C-Ware, the Energy Efficient Solutions logo, mobilegt, PowerQUICC, QorIQ, StarCore and Symphony are trademarks of
Contents 2. Contents
Installation Manual NXP reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. 2016 Freescale Semiconductor, Inc. 2017 NXP All rights
i.mx 6UltraLite Product Usage Lifetime Estimates
NXP Semiconductors Document Number: AN5198 Application Notes Rev. 2, 08/2016 i.mx 6UltraLite Product Usage Lifetime Estimates 1. Introduction This document describes the estimated product lifetimes for
Mask Set Errata for Mask 1N87P
NXP Semiconductors SAC57D54H_1N87P Mask Set Errata Rev. 3, Apr 2017 Mask Set Errata for Mask 1N87P This report applies to mask 1N87P for these products: SAC57D54H Table 1. Errata and Information Summary
MQX RTOS Release Notes for Kinetis SDK v1.2.0 for KL33Z64 for FRDM-KL43Z Freescale Freedom Development Platform
Freescale Semiconductor Document Number: MQXKSDK120KL33RN Release Notes Rev. 0, 4/2015 MQX RTOS Release Notes for Kinetis SDK v1.2.0 for KL33Z64 for FRDM-KL43Z Freescale Freedom Development Platform 1
Using the Built-in Self- Test (BIST) on the MPC5744P
NXP Semiconductors Using the Built-in Self- Test (BIST) on the MPC5744P by: NXP Semiconductors 1 Introduction The MPC5744P device targets chassis and safety applications which require a high Automotive
Common Board Design between T1024 and T1022 Processor
NXP Semiconductors Document Number: AN4829 Application Note Rev. 0, 07/2017 Common Board Design between T1024 and T1022 Processor 1 About this document This document explains how to design a common board
Freescale, the Freescale logo, AltiVec, C- 5, CodeTEST, CodeWarrior, ColdFire, ColdFire+, C-Ware, the Energy Efficient Solutions logo, Kinetis,
Freescale, the Freescale logo, AltiVec, C- 5, CodeTEST, CodeWarrior, ColdFire, ColdFire+, C-Ware, the Energy Efficient Solutions logo, Kinetis, mobilegt, PowerQUICC, Processor Expert, QorIQ, Qorivva, StarCore,
Kinetis USB-KW41Z Wireless Protocol Sniffer Quick Start Guide
NXP Semiconductors Document Number: MKW41ZSNIFFERQSG User's Guide Rev. 2, 09/2016 Kinetis USB-KW41Z Wireless Protocol Sniffer Quick Start Guide This document describes the usage of the USB- KW41Z evaluation
Mask Set Errata for Mask 3N86B
Freescale Semiconductor KINETIS_50MHZ_3N86B Mask Set Errata Rev 08 AUG 2013 Mask Set Errata for Mask 3N86B Introduction This report applies to mask 3N86B for these products: KINETIS_50MHZ Errata ID Errata
MCUXpresso SDK USB Power Delivery
NXP Semiconductors Document Number: Quick Start Guide Rev. 1.0, 04/2017 MCUXpresso SDK USB Power Delivery 1. Introduction Today many devices charge or get their power from USB port connected in laptops,
MQX RTOS Release Notes for Kinetis SDK FRDM- KV10Z Freescale Freedom Development Platform
Freescale Semiconductor Document Number: MQXKSDK120KV10RN Release Notes Rev. 0, MQX RTOS Release Notes for Kinetis SDK 1.2.0 FRDM- KV10Z Freescale Freedom Development Platform 1 Overview These are the
TWR-LS1021A Getting Started
Freescale Semiconductor Getting Started Document Number: TWR-LS1021AGS Rev. 3, 10/2015 TWR-LS1021A Getting Started 1 Introduction This document describes how to connect the QorIQ LS1021A Tower System Module
Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, ColdFire+, C-Ware, the Energy Efficient Solutions logo, Kinetis,
Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, ColdFire+, C-Ware, the Energy Efficient Solutions logo, Kinetis, mobilegt, PowerQUICC, Processor Expert, QorIQ, Qorivva, StarCore,
Using an External GCC Toolchain with CodeWarrior for Power Architecture
Freescale Semiconductor Application Note Document Number: AN5277 Using an External GCC Toolchain with CodeWarrior for Power Architecture 1. Introduction This document explains how to use an external GNU
FRDM-KE04Z User s Guide User Guide
Freescale Semiconductor Document Number: FRDMKE04ZUM User's Guide Rev 0, 02/2014 FRDM-KE04Z User s Guide User Guide by: Wang Peng 1 Overview The Freescale Freedom development platform is an ideal evaluation
WPR1500-LDO MP Receiver V2.1 Reference Design User s Guide
NXP Semiconductors User s Guide Document Number: WPR1500LDOMPUG Rev. 0, 09/2016 WPR1500-LDO MP Receiver V2.1 Reference Design User s Guide 1 Introduction This document describes how to use the WPR1500-LDO
Using the Xtrinsic FXOS8700CQ Command Line Interface Software
Freescale Semiconductor Document Number: AN4460 Application Note Rev. 1, 04/2013 Using the Xtrinsic FXOS8700CQ Command Line Interface Software by: Talat Ozyagcilar Systems and Applications Engineer 1 Introduction
Qorivva MPC5744P Evaluation Board 144LQFP Expansion Board User s Guide Barbara Johnson Applications Engineering
Freescale Semiconductor User s Guide Document Number: MPC5744PEVB144UG Rev. 1, 11/2012 Qorivva MPC5744P Evaluation Board 144LQFP Expansion Board User s Guide by: Barbara Johnson Applications Engineering
Power Consumption and Measurement of i.mx RT1020
NXP Semiconductors Document Number: AN12204 Application Note Rev. 0, 06/2018 Consumption and Measurement of i.mx RT1020 1. Introduction This document discusses about the power consumption of i.mx RT1020.
Hardware Development Guide for the MIMXRT1050/MIMXRT1060 Processor
NXP Semiconductors Document Number: MIMXRT105060HDUG User s Guide Rev.0 08/2018 Hardware Development Guide for the MIMXRT1050/MIMXRT1060 Processor 1. Introduction This document s purpose is to help hardware
TWR-LS1021A Getting Started
Freescale Semiconductor Getting Started Document Number: TWR-LS1021AGS Rev. 0, 09/2014 TWR-LS1021A Getting Started 1 Introduction This document explains how to connect the QorIQ LS1021A Tower System Module
Processor Expert Software for i.mx Processors Version 1.0
Release Notes Processor Expert Software for i.mx Processors Version 1.0 1 Overview Processor Expert Software for i.mx processors is a suite of configuration tools for i.mx family processors. This file
Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, ColdFire+, C- Ware, the Energy Efficient Solutions logo, Kinetis,
June 2013 Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, ColdFire+, C- Ware, the Energy Efficient Solutions logo, Kinetis, mobilegt, PEG, PowerQUICC, Processor Expert, QorIQ,
How to use FlexMemory as D-Flash and EEPROM in KE1xF
NXP Semiconductors Document Number: AN5338 Application Note Rev. 0, 09/2016 How to use FlexMemory as D-Flash and EEPROM in KE1xF 1. Introduction The FlexMemory (FlexNVM and FlexRAM) is available on NXP's
Offline Flash Programmer for Kinetis K- and L-series MCUs
NXP Semiconductors Document Number: AN5331 Application Note Rev. 0, 09/2016 Offline Flash Programmer for Kinetis K- and L-series MCUs By: Xi Yang 1 Introduction Effective and convenient tools for the flash
Bharat Bhushan, Stuart Yoder
Bharat Bhushan, Stuart Yoder October 2013 Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, ColdFire+, C-Ware, the Energy Efficient Solutions logo, Kinetis, mobilegt, PEG, PowerQUICC,
i.mx 7 Heterogeneous Multicore Processing
i.mx 7 Heterogeneous Multicore Processing FTF-DES-N1932 LAMBERT ZHANG SEPTEMBER, 2016 AGENDA Introduction/Overview Heterogeneous Multicore Processing Software 1 1 Learning Goals Basic knowledge about i.mx
How to Enable Boot from QSPI Flash
NXP Semiconductors Document Number: AN12108 Application Note Rev. 0, 02/2018 How to Enable Boot from QSPI Flash 1. Introduction The i.mx RT Series is industry s first crossover processor provided by NXP.
Adding a run control interface into an existing CodeWarrior for MCU v10.x project
Freescale Semiconductor Document Number:AN4902 Application Note Rev 03/2014 Adding a run control interface into an existing CodeWarrior for MCU v10.x project 1 Introduction There are two ways to add a
Smart Plug Software Design Reference Manual
NXP Semiconductors Document Number: DRM158 Design Reference Manual Rev. 0, 03/2017 Smart Plug Software Design Reference Manual 1. Introduction This design reference manual describes a solution for a smart
Configuring DDR in U-Boot using QCVS
NXP Semiconductors Application Note Document Number: AN5279 Configuring DDR in U-Boot using QCVS 1. Introduction This document describes how to configure the double data rate (DDR) memory in U-Boot, running
Wai Chee Wong Sr.Member of Technical Staff Freescale Semiconductor. Raghu Binnamangalam Sr.Technical Marketing Engineer Cadence Design Systems
Wai Chee Wong Sr.Member of Technical Staff Freescale Semiconductor Raghu Binnamangalam Sr.Technical Marketing Engineer Cadence Design Systems Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior,
FRDM-K64F Board Errata
Freescale Semiconductor, Inc. Document Number: FRDMK64F_ERRATA Board Errata Rev. 2.0, 06/2014 FRDM-K64F Board Errata by: Freescale Semiconductor, Inc. 2014 Freescale Semiconductor, Inc. 1 Errata Title:
Kinetis Flash Tool User's Guide
NXP Semiconductors Document Number: MBOOTFLTOOLUG User's Guide Rev 1, 05/2018 Kinetis Flash Tool User's Guide Contents Contents Chapter 1 Introduction...4 Chapter 2 System Requirements... 5 Chapter 3 Tool
UM QN908x Quick Start. Document information. QN908x, Quick Start, Development Kit, QN9080 DK, QN9080 Development Kit
QN908x Quick Start Rev.2.0 21 March 2018 User manual Document information Info Keywords Abstract Content QN908x, Quick Start, Development Kit, QN9080 DK, QN9080 Development Kit This Quick Start document
CodeWarrior Development Studio for StarCore 3900FP DSP v SP3 Release Notes
Freescale Semiconductor Document Number: CW_SC_3900FP_v10.8.3 SP3 Release Notes Rev. 1.0, 11/2015 CodeWarrior Development Studio for StarCore 3900FP DSP v10.8.3 SP3 Release Notes Release Description ServicePack3
Stéphane Gervais-Ducouret
TM Stéphane Gervais-Ducouret Global Marketing Director Sensors stephane.gervais@freescale.com 6 th September 2012 Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, C-Ware, the