INSTRUCTION MANUAL. TOWER SPEAKER WITH ipod/iphone DOCKING & PLL FM STEREO RADIO MODEL: IPT-400

Size: px

Start display at page:

Download "INSTRUCTION MANUAL. TOWER SPEAKER WITH ipod/iphone DOCKING & PLL FM STEREO RADIO MODEL: IPT-400"

Eustace McGee
5 years ago
Views:

1 INSTRUCTION MANUAL TOWER SPEAKER WITH ipod/iphone DOCKING & PLL FM STEREO RADIO MODEL: IPT Please read following instructions prior to operating your unit. Manufacturer of this unit follows a principle of continuous improvement and has no responsibility for any changes that are made to the unit nor any liability for these changes. Thanks for your choice of our products. 17 ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S, 0 1

2 POWER SUPPLY Plug AC plug into the outlet socket on the unit for connecting the main power. SLEEP TIMER SETTING You can set the sleep timer at power on&standby modes as following instructions: At the standby mode, press SLEEP button repeatedly to cycle through the sleep time options: OFF MAIN UNIT 1. VOLUME - BUTTON 2. VOLUME + BUTTON 3. LCD DISPLAY 4. SOURCE BUTTON 5. POWER BUTTON 6. PLAY/PAUSE BUTTON 7. ipod/iphone DOCKING 8. TUN UP BUTTON 9. TUN DOWN BUTTON 10. REMOTE SENSOR 11. A/V INPUT JACKS 12. COMPONENT VIDEO OUTPUT JACKS 13. LINE IN JACK 14. SUB OUTPUT JACK 15. COMPOSITE VIDEO OUTPUT JACK 16. RESET BUTTON 17. AC CORD REMOTE CONTROL 1. MUTE BUTTON 2. POWER BUTTON 3. NUMERIC BUTTONS 4. VIDEO/NUMERIC 0 BUTTON 5. CLOCK SYNC/NUMERIC 9 BUTTON 6. PLAY LIST UP/DOWN BUTTONS 7. ALBUM UP/DOWN BUTTONS 8. SLEEP BUTTON 9. ipod-/tun- BUTTON 10. NAVIGATION DOWN BUTTON 11. CHAPTER +/- BUTTON 12. SOURCE BUTTON 13. DIMMER BUTTON 14. REPEAT/ST BUTTON 15. MENU BUTTON 16. TREBLE +/- BUTTON 17. BASS +/- BUTTON 18. CLOCK VIEW/SHUFFLE BUTTON 19. NAVIGATION UP BUTTON 20. SELECT BUTTON 21. ipod+/tun+ BUTTON 22. VOLUME +/- BUTTON 23. PLAY/PAUSE&TIME SET/MEM BUTTON Release the button, then WELCOME shows on the screen, the unit is turned on. After the sleep time setting, you can play the unit freely. Once the sleep time is expired, the unit will be switched off. Or, during playback, press SLEEP button repeatedly to cycle through the sleep time options, once the options you want shows on the screen, release the sleep button. During playback, press SLEEP button once to check the remain sleep time. HOW TO SET TIME 1. At the standby mode, press and hold PLAY/PAUSE button on the unit or PLAY/PAUSE&TIME SET/MEM button on the remote until Hour flashes on the screen with "CLK" shows on the screen; use TUN UP/DOWN button on the unit or TUN+/- button on the remote to adjust the hour and confirm your adjustment by pressing PLAY/PAUSE button on the unit or PLAY/PAUSE&TIME SET/MEM button on the remote; Minute starts blinking on the screen, press TUN UP/DOWN button on the unit or press TUN+/- button on the remote to set the minute accordingly, press PLAY/PAUSE button on the unit or PLAY/PAUSE&TIME SET/MEM button on the remote again to confirm your setting. 2. Clock synchronization starts automatically at the first docking whenever the unit has just been connected to AC power supply. Subsequent to the first docking, it is necessary to long press the CLOCK SYNC button to conduct clock synchronization. During playback, connect the iphone/ipod to the unit at ipod mode, and then press and hold CLOCK SYNC button to conduct clock synchronization. 3. During playback, press CLOCK VIEW button to check the current time, press the button again to resume the previous display. Note: The time only could be set on standby mode. ipod/iphone OPERATING PLAYING AN ipod/iphone 1. Dock the ipod/iphone on to the unit. Power on the unit, then press SOURCE button repeatedly to switch to ipod mode. 2. Press PLAY/PAUSE button to start or pause the playback. 3. Press TUN UP button on the unit or ipod+/tun+ button on the remote to skip to the next track; press and hold to search through the track forward. 4. Press TUN DOWN button on the unit or ipod-/tun- button on the remote to skip to the previous track; press and hold to search through the track backward. 5. Press MENU button on the remote to return back to the ipod menu, press navigate UP/DOWN buttons to select your desired track for playback, press SELECT button to confirm. 2 3

3 6. Press PLAYLIST UP/DOWN button to cycle through the playlists on the connected ipod/iphone. 7. Press ALBUM UP/DOWN button to select your desired album for playback on the connected ipod/iphone. 8. Press CHAPTER+/- button to select a corresponding chapter for playback. 9. Press and hold CLOCK VIEW/SHUFFLE button to enable or disable the shuffle function. 10. Press REPEAT/ST button repeatedly to cycle through the repeat options (repeat 1, repeat album and repeat off). DIMMER During playback, press DIMMER button to adjust the light of the LCD screen. CONNECTING WITH OTHER APPLIANCES FM RADIO TUNING THE FM RADIO 1. Power on the unit, switch to TUNER(RADIO) mode by pressing SOURCE repeatedly. 2. Press TUN UP/DOWN button on the unit or TUN+/- button on the remote to fine tune radio station. Press and hold TUN UP/DOWN button on the unit or TUN +/- button on the remote to auto search radio station forward or backward respectively (When an available station will be found, the unit will broadcast it immediately and the searching will be stopped). 3. At radio mode, it is possible to access the frequency via numeric buttons on the remote control. For example, press buttons 8, 9 and 8 to get to 89.8 MHz; If access a wrong frequency, "ERROR" will display on the screen. 4. During radio playback, press REPEAT/ST button on the remote to switch between FM STEREO and FM MONO modes. STORING YOUR FAVORITE RADIO STATION 1. During playback, press and hold PLAY/PAUSE button on the unit or PLAY/PAUSE&TIME SET/MEM button on the remote for storing the current station until memory cell number "P01" flashes on the screen. 2. Use TUN UP/DOWN button on the unit or TUN+/- button on the remote to select the corresponding memory cell among P01-P20 for storing the station. 3. Confirm your selection by pressing PLAY/PAUSE button on the unit or PLAY/PAUSE&TIME SET/MEM button on the remote. 4. During radio playback, press PLAY/PAUSE button on the unit or PLAY/PAUSE&TIME SET/MEM button on the remote repeatedly to recall the stored stations. MUTE THE UNIT During playback, press MUTE button to switch off the audio. Press the button again to resume the audio. VOLUME LEVEL/TREBLE/BASS ADJUSTMENT Press VOLUME +/- button or TREBLE +/- button or BASS +/- button to adjust the volume output level or treble effect or bass effect. RESET BUTTON When using the unit, you will come across some problems that the unit doesn't work or halt accidentally; you can use a needle or a small, slender implement to poke the RESET button in the rear of the player, the unit will turn off automatically and then please reboot the unit, the unit will recover the normal mode. LINE IN Follow steps to connect the unit to another audio device: 1. Connect the device into the player LINE IN jack with the LINE OUT cables. 2. Press POWER button to turn the unit on. 3. Press SOURCE button repeatedly to switch the unit to Line In mode. 4. Power on the device and begin play. 4 5

4 A/V INPUT 1. Connect the A/V jacks on the unit to audio&video source, for example, DVD player with an RCA cable. 2. Press the POWER button to turn the unit on. 3. Press the SOURCE button repeatedly to switch to AV mode. 4. Use the native controls on the connected audio&video device to begin playing music through the connected the unit. 5. It may input audio source through the Audio Right&Left Jacks of the A/V Jacks to the unit following above instructions. COMPATIBLE WITH THE FOLLOWING ipod and iphone 1st + 2nd generation 5GB 10GB 20GB 20GB 40GB (color display) 20GB 30GB COMPOSITE VIDEO OUTPUT 1. Connect a RCA cable to the Composite Video Output and a television. 2. Power on the TV set and the unit. 3. Adjust the connected television to the proper input setting. 4. Press VIDEO button repeatedly to switch between Composite and Component video output modes. 5. Video from a docked iphone/ipod or the connected DVD or the like can now be played through the unit to the connected television. Note: Make sure the docked iphone or ipod s TV out option is turned on. classic 80GB 160GB (2007) classic 160GB (2009) nano 1st generation 1GB 2GB 4GB nano 2nd generation (aluminum) 2GB 4GB 8GB COMPONENT VIDEO OUTPUT The Component Video Output jacks only works at ipod mode. It cannot output video from the A/V input. 1. Connect a component video cable to the Component Video Output jacks on the unit and a television. 2. Adjust the connected television to the proper input setting and make sure the docked iphone or ipod s TV out option is turned on. 3. Press VIDEO button on the remote to switch to Component video output modes. 4. Video from a docked iphone/ipod can now be played through the bar speaker to the connected television. SUBWOOFER OUTPUT The unit comes with a built-in subwoofer and allows you to output the subwoofer signal to an external amplifier (such as a 2.1CH amplifier or 5.1/6.1/7.1CH amplifier or a 2.1CH micro system) via the SUB OUTPUT jack on the rear of the unit. Follow the below steps to connect the external amplifier: 1. Use a RCA cable to connect the external amplifier with a SUB INPUT jack to the Sub Output jack on the unit. 2. Power on the unit and the external amplifier. 3. When audio is played through any source, the sound will be produced from the unit and the connected external amplifier synchronously for enhancing the sound effect. touch 1st generation 32GB (color display) 40GB 60GB nano 3rd generation 4GB 8GB touch 2nd generation 32GB 5th generation 30GB nano touch 3rd generation 32GB 64GB 5th generation 60GB 80GB nano 5th generation (video camera) touch 8GB 32GB 64GB mini 4GB 6GB nano 6th generation Made for iphone 4GB Made for iphone 3G Made for iphone 3GS 32GB Made for iphone 4 16GB 32GB 6 7

5 DOCK ADAPTOR COMPATIBILITY ipad MODEL CAPACITY ipad 32GB iphone PLAY & CHARGE VIDEO OUTPUT iphone 4 16GB 32GB BRACKET iphone 3GS 32GB 12 iphone 3G 12 iphone 4GB 12 ipod touch ipod touch 8GB 32GB 64GB ipod touch 3rd generation 32GB 64GB 14 ipod touch 2nd generation 32GB 64GB 14 ipod touch 1st generation 32GB 14 ipod nano ipod nano 6th generation ipod nano 5th generation (video camera) 8 ipod nano 8 ipod nano 3rd generation 4GB 8GB 13 ipod nano 2nd generation (aluminum) 2GB 4GB 8GB 8 ipod nano 1st generation 1GB 2GB 4GB 8 ipod and ipod mini ipod classic (2009) 120GB 160GB 10 ipod classic (2007) 160GB 10 ipod classic 80GB 10 ipod 5th generation 60GB 80GB 10 ipod 5th generation 30GB 10 ipod (color display) 40GB 60GB ipod (color display) 20GB 30GB 10 ipod 40GB 10 ipod 20GB 10 ipod mini 4GB 6GB TROUBLE SHOOTING Symptom Possible Cause Solution Radio sound distorted. 1. The station is not tuned in. 2. There is a poor signal in the area. 1. Fine tune the station. 2. Reposition the unit. No radio sound. The ipod will not play No ipod sound. 1. The unit is not in tuner mode. 2. The volume has been muted or is on the minimum setting. 1. The unit is not in ipod mode. 2. The ipod is not connected correctly. 1. The unit is not in ipod mode. 2. The volume has been muted or is on the minimum setting. 1. Press SOURCE button repeatedly until switching to tuner. 2. Adjust the volume level or press MUTE button to resume audio. 1. Press SOURCE button repeatedly until switching to ipod. 2. Reconnect the ipod. 1. Press SOURCE button repeatedly until switching to ipod. 2. Adjust the volume level or press MUTE button to resume audio. SPECIFICATIONS Power supply... AC V 50/60Hz Power consomption... 60W Standby power consumption... < 2W Radio frequency coverage... FM: 87.5MHz MHz Speaker size... TREBLE 2.5 inch, SUB 3.5 inch Outputs... YUV (RCA) SUB (RCA) VIDEO (RCA) Inputs... Line in AV ipone/ipod Output power... 8W x 2 (RMS) + subwoofer 24W (RMS) Output power MAX... 11W X 2 + subwoofer 32W Net Weight... about 4.3Kg Dimensions (L) x 172(W) x 828(H) mm 8 9

6 IMPORTANT SAFETY INSTRUCTIONS The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. When the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. To be completely disconnected the power input, the mains plug of the apparatus or the appliance coupler shall be disconnected from the mains completely. No naked flame sources, such as lighted candles, should be placed on the apparatus. Minimum distances 2.0cm around the apparatus for sufficient ventilation. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. The use of apparatus is in tropical and/or moderate climates. Attention should be drawn to the environmental aspects of battery disposal. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. The marking plate is located at the back of the apparatus. Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately. As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment. All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city

AXESS Products Corp. All rights reserved 2012 AXESS Products Corp. All rights reserved

AXESS Products Corp. All rights reserved 2012 AXESS Products Corp. All rights reserved 1 2 3 4 1 6 7 8 9 26 10 12 14 11 13 15 16 18 17 20 22 24 19 21 23 25 27 28 29 5 LOCATION OF CONTROLS 1. SPEAKERS 2. USB PORT 3. LCD DISPLAY 4. SD/MMC CARD SLOT 5. AC SOCKET 6. AUX IN JACK 7. FM TELESCOPIC