ATID Co,. Ltd. Disclaimer

Size: px

Start display at page:

Download "ATID Co,. Ltd. Disclaimer"

Jason Patterson
6 years ago
Views:

2 ATID Co,. Ltd Copyright c2006 ATID Co., Ltd. An Unpublished Work All right reserved. No part of the contents of this documentation or the procedures described there in may be reproduced or transmitted in any form or by any means without prior written permission of ATID Co., Ltd.. or its wholly owned subsidiaries ("ATID "). Owners of ATID products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting ATID Customer Administration. Electronic versions may either be downloadable from the ATID web site ( or provided on appropriate media. If you visit our web site and would like to make comments or suggestions about this or other ATID publications, please let us know via the Contact ATID page. Disclaimer ATID is a registered trademark of ATID Co., Ltd AT911N is a registered trademark of ATID Co., Ltd. All of the brands for AT911N are included in ATID Co,. Ltd ATID Co., Ltd. #1205, Byuksan/Gyungln Digital Valley II, #481-10, Gasan-Dong, Gumchon-Gu, Seoul, Korea Tel: Fax:

3 Content table Before Using the Manual for AT911N Before Using the Manual for AT911N, How to use the battery correctly Caution when using AT911N... 5 Chapter 2. Product Composition Product Composition Name of Each Part Name and Function of Each Part... 9 Chapter3. Basic Functions Power and Battery Attaching and Detaching the Main Battery Charging Battery Low-Power Mode(Sleep-mode) Check the Battery Level Battery Replacement System Reset (Restart) Hard Reset (Cold Reset) Use of Micro SD, SIM, SAM Card Micro SD Card installation SIM card Installation System Configuration Screen Brightness Settings Sound Volume Settings Use of Keypad Use of Keypad Keypad Button Execution Connection with PC Connection settings between PC and Device Firmware Upgrade Chapter 4. Use of Optional Module D & 2D Barcode Scanner Read 1D or 2D Barcode Barcode Keyboard Settings Barcode Scanning WiFi Connection WiFi Connection and Termination Bluetooth Bluetooth Connection/Termination GPS Module GPS Demo Program Execution Use of Camera Use of Camera Use of NFC13.56MHz RFID Reader NFC Execution NFC ON/OFF Settings UHF 900Mhz RFID Program Chapter 5. Appendix Product Specification

4 Before Using the Manual for AT911N, User guide inclusive of text, images, logos, product names is either the property of, or used with permission by ATID CO.LTD. The information may not be distributed, modified, displayed, reproduced (in whole or in part) without the prior written permission of ATID CO.LTD There are maybe some differences between user guide and actual function of device User guide can be adjusted by ATID CO.LTD without consent of user discretionally. User guide is written for users who want to use and maintain the AT870N. Please read and understand these instruction prior to operating this unit. Safety information Please read and follow all warnings and cautions for user`s safety in this document before you handle and operate ATID equipment WARNING! A warning requires that you must strictly pay attention to operate procedure, practice, condition, and state, or might be injured seriously. CAUTION! A caution explains the important point which has a huge possibility to break the device and make malfunction NOTE! A notice provides you with needed additional information while using AT911N 4

5 Chapter 1. Caution when using AT911N Please aware of the manual contents in advance, before you handle and operate your AT911N and other ATID Products. 1. How to use the battery correctly case of that you dropped the main body or battery in water, please do not put into the stove or heater for drying. Just keep it in natural drying or contact purchase place Please note that the battery terminal doesn t have to be contacted to metallic object If you do not use the battery for a long time, please keep it at room temperature after charging Operating time of battery can be shorter than usual in accordance with loss of battery and using period. In this case, please contact us. You have to use provided adaptor when charging the device. 2. Caution when using AT911N User careless or products repair would damage the stored data. Manufacturer is not responsible for this damage, so please do back-up the important data separately If you have a problem on product, do not try to repair or disassemble it by yourself, please contact our customer service center. Do not use your product at the specific places such as hospital, plane and so on where electromagnetic wave or the risk may occur Please note that using the device in environment of high temperature and humidity for long hours can make a malfunction of device. In case of that noise, smoke and odor occur at the device while using product, please disconnect the charger with device and off the power immediately, then please contact our customer service center If you have any other questions on use of item, please contact our customer service center 5

it is equipped with barcode scanner, RFID

Standard Battery (Equip with PDA body) 3)

6 Chapter 2. Product Composition AT911N is based upon Android OS and as the state of the art product. it is equipped with barcode scanner, RFID Tag reader, MSR card reader, printer, smart card reader, MODEM, Camera and so on and it can be applied to Industry, Enterprise, Logistics and so on, can be used extensively in many fields due to this kind of various functions 1. Product Composition Open the packing box and confirm the items as below. 1) PDA body 2) H a n d S t r a p 3) Standard Battery (Equip with PDA body) 3) Power Adapter 4)USB Sync Cable 5) H a n d S t r a p Please contact out customer service in defect of product composition and need to be changed. Please refer to the below picture * < In the Packing box > 6

7 2. Name of Each Part Receiver Charge LED WLAN/3G LED LCD Touch Screen Reset Key MIC KEY PDA < Front > EarJack UHF Power Key Scan Key Side Key GUN < Side > 7

8 Scanner Camera Antenna Camera Flash < Forepart > DC Power Port USB Synchronization/ DC Power Port < Back > 8

9 3. Name and Function of Each Part NAME 1D/2DScanner(Optional) UHF Connecting port Internal NFC(Optional) Reset Button Microphone WLAN(Optional) LED Battery Latch Main Battery Scan Button Speaker Sync Cable Connector Earphone Jack LED Adapter Jack Camera Flash(Optional) Camera(Optional) Touch Screen Hand strap hole FUNCTION Please be careful not to get the damage or the foreign substances at the Window emitted the laser beam Warning! Do not look at the laser beam directly It is connector to equip the UHF 900Mhz tag reader module It is location where NFC internal module is equipped Reset the device It is used for telephone conversation. It displays whether the wireless WLAN power gets supply You can attach and detach by moving it from side to side It attaches on body for receiving power You can scan the barcode or RFID tag by this buttons It is equipped for playing sound and various sound effects internally It makes device transmit and receive the data with computer in connection with USB sync cable. It is used for connecting the earphone with device. It will be changed with red color in charging state / with green color in full Please do connect it with provided adapter when charging the device It functions in case of using camera It makes image capture and save You can implement and terminate the program to touch the screen Please attach hand strap and stylus pen with device for your convenience when using it for a long time. 9

Chapter3. Basic Functions 1. Power and Battery Main battery for AT911N supplies the power to the system and RAM which could keep the data. Main Battery: 3.

Please undo the battery latch and then, lift up the main battery to detach it after grapping the lever at the bottom.

10 Chapter3. Basic Functions 1. Power and Battery Main battery for AT911N supplies the power to the system and RAM which could keep the data. Main Battery: 3.7V 2,200mA Lithium - Ion 1.1 Attaching and Detaching the Main Battery Detaching the Battery Below images are shown the bottom of device. Please undo the battery latch and then, lift up the main battery to detach it after grapping the lever at the bottom. Battery Latch Attaching the Battery Please put the top of the battery into the above gap of device and then, push the bottom of battery into the below gap of device and then, make the battery latch originally. 10

11 1.2 Charging Battery You have to charge it through dedicated adapter which is provided when you bought Red light is lit on LED when it starts charging. It will be changed with green light in case of full Connecting the adapter 1. Connect the adapter plug with 220V (or appropriate socket) 2. Connect adapter DC cable with Power Connecting Jack 3. LED will be changed when the red light is lit on the LED Caution: User must use provided adapter with device. Otherwise your device might be damaged 1.3 Low-Power Mode(Sleep-mode) In case of that user doesn`t use the system when another program is implemented or main screen is shown up as below, user can move into the state of low-power mode(sleep-mode) by pushing <Power> Button. If user wants to use the device once again, please push the <Power> button and then wait until the main screen is shown up the device. Use the Low-Power Mode (Sleep Mode) by using <Power> button Move into the Low-Power Mode(Sleep-Mode): 1. Device can move into the Low-Power Mode if user pushes the <Power> button in state of power-on. Cancel the Low-Power Mode (Sleep Mode): 1. Power will be turned on when user pushes the <Power> button in state of power-off 11

NOTE: Data located in RAM will be preserved in the state of power-off, if the battery remains and program will be recovered when the device is turned on once again.

12 NOTE: Data located in RAM will be preserved in the state of power-off, if the battery remains and program will be recovered when the device is turned on once again. When main battery discharges perfectly, data saved in RAM will be disappear. In that case, system will be restarted after energizing the power. Use of Automatic Low-Power Mode (Sleep mode) If the user doesn t use the device for setting time, system enters into the low power mode (sleep mode) automatically. User also can change the setting time in control panel and power management as below. Using proper time-out setting prevents the system is on a long time without the user and extends hours of battery use. [Menu] -> [Application] -> [Setting] -> [Display] ->[Sleep] Enter the screen as above in case of that User double clicks the <Display> Icon The system will be turned on by pushing <Power> button even if system moves into the Low-Power Mode in accordance with automatic low-power mode. Turn Off the battery in case of discharging System will be automatically entered into the Low-Power mode(sleep-mode) when the main battery discharges. At this point, system doesn`t work even if user pushes the <Power> button. In that case, user can turn on the device after charging the main battery or connecting the device with charger jack. 1.4 Check the Battery Level NOTE: Using time of battery is influenced by using method, surrounding environment. In general, user can use the device for 6 or 12 hours after charging the main battery at full Check the Battery Level 12

[Menu] -> [Application] -> [Settings] -> [About Phone] -> [Status] Caution for battery shortage Caution for low battery shortage will show up at the screen when the main battery level is too low to

13 [Menu] -> [Application] -> [Settings] -> [About Phone] -> [Status] Caution for battery shortage Caution for low battery shortage will show up at the screen when the main battery level is too low to execute In that case, please turn off the device by pushing the <Power> button as soon as possible and then, charge the device. 1.5 Battery Replacement Please buy a new battery, if existing battery has been damaged and its life has ended CAUTION! Discard the dead battery to assigned place 13

14 2. System Reset (Restart) Please restart the system by using reset function when the system makes no response and application program doesn`t work completely. 4.1 Hard Reset (Cold Reset) In need of Hard Reset, Hard reset which is called cold reset can be used for initializing the hardware completely. Registry value, copied file and installed program will be originally remained in spite of hard reset [Hard Reset Procedure] Please push the <Power> Button and <Reset> Button with stylus pen simultaneously and then, unhand those buttons Please push the <Reset> Button in short [Hard Reset Result] System will restart. Operating System will start after loading the device. 14

3. Use of Micro SD, SIM, SAM Card Below images show the back side of device when

and 1EA Micro SD Card Slot inside of battery.

1 Micro SD Card installation Do unlock the Micro SD Card by sliding the card slot cover

15 3. Use of Micro SD, SIM, SAM Card Below images show the back side of device when separating the main battery from device There are 1EA SIM Card Slot, 1EA SAM Card Slot and 1EA Micro SD Card Slot inside of battery. Micro SD Card Slot SAM Card Slot SIM Card Slot 3.1 Micro SD Card installation Do unlock the Micro SD Card by sliding the card slot cover to right side Lift the slot cover up Put the SD memory on the slot and then, shut the cover up Do lock the slot cover by sliding it to left side and then, turn on the device after 15

screenshot after installing the SIM card.

16 SD Memory folder will be shown as below after executing the File Manager when inserting Micro SD memory card. 3.2 SIM card Installation Below is the screenshot after installing the SIM card. Place and insert the SIM card in accordance slot shape 16

4. System Configuration 4.1 Screen Brightness Settings Brightness of the screen is mostly effects on the power consumption, so brightness can set by user`s taste [Brightness Settings Method] 1.

17 4. System Configuration 4.1 Screen Brightness Settings Brightness of the screen is mostly effects on the power consumption, so brightness can set by user`s taste [Brightness Settings Method] 1. [Menu] -> [Application] -> [Settings] -> [Display] ->[Brightness] Brightness: Adjust the degree of screen brightness Wallpaper: Select the Wallpaper Auto-rotate screen: Adjust the Auto-rotate screen function Sleep: Adjust the setting time for sleep mode Font Size: Adjust the font size 4.2 Sound Volume Settings Volume is set to around 80% at the first. User can adjust the sound attributes by doing [Menu] -> [Application] -> [Settings] -> [Sound] Volume and Sound Settings [Menu] -> [Application] -> [Settings] -> [Sound] 17

18 5. Use of Keypad Keypad is an input method editor that inputs numbers or alphabetic characters easily. 5.1 Use of Keypad Please follow the below steps for changing the input language [Menu] -> [Application] -> [Settings] -> [Language & Input] Or it can be changed at the selection screen for input method 18

19 5.2 Keypad Button Execution Explain what keypad function is. Keypad Function Explanation < > Menu Key (Android. view. Menu can be used by importing) < > Move to the Home < > It has KeyEvent value of KEYCODE_SOFT_RIGHT < > Use for going back to previous state < > Move to search function It has a KeyEvent value of both KEYCODE_SOFT_RIGHT and <Side Key> KEYCODE_SOFT_LEFT 6. Connection with PC User can work such as installation, copy, movement, deletion by connecting PC with Device after synchronizing the data one another. 6.1 Connection settings between PC and Device Connect PC with device after downloading the below program PdaNetA325x64.exe Connection by program (Android USB Driver for WIN7) Download link: 19

20 7. Firmware Upgrade Please click the firmware update application by choosing [Menu] -> [Application] as occasion when user needs firmware upgrade of AT911N. Please proceed with the Firmware image update through manufacturer or supplier separately 20

21 Chapter 4. Use of Optional Module This chapter describes various option modules which use with AT911N. Please refer to description on necessary option modules and use them. Option Module for AT911N According to the purpose of use, AT911N device provides the options as below. User has to check below option modules before buying the device since its specifications are outside of basic AT911N. Various optional modules for AT911N 1) Barcode Reader -. 1D Laser Barcode Scanner -. 2D Imager Barcode Scanner 2) Wireless LAN a/ b/g 3) Bluetooth 4) UHF 900MHz RFID Gen 2 Full Function ISO C (Only Tag UID Reader) 5) NFC (13.56Mhz RFID) 6) GPS Module 7) Phone 8) Camera 21

22 1. 1D & 2D Barcode Scanner This Device can be equipped with barcode scanner which can read 1D & 2D barcode 1.1 Read 1D or 2D Barcode [Menu]->Execute the application in the [Application] of ATID Scanner Execution screen of ATID Barcode 22

1.2 Barcode Keyboard Settings User can input the barcode value on the screen which located at the cursor by using barcode emulator program of AT911N and scan

program, wordpad program without development of the new program that shows the separate barcode value.

23 1.2 Barcode Keyboard Settings User can input the barcode value on the screen which located at the cursor by using barcode emulator program of AT911N and scan button, scan sound and barcode value input method 1) Utilization Method Barcode value will be inputted on the screen which located at the cursor regardless of web program, wordpad program without development of the new program that shows the separate barcode value. [Menu] -> [Application] -> [Settings] -> [Language & Input] 2) Emulator Execution Cursor is on the screen and user can use this program when barcode soft keyboard is created Read barcode value by using SCAN Key and Side key 23

barcode] 1.Please bring it close to barcode in case of smaller barcode. This device can read the barcode in range of 40~300mm.

24 1.3 Barcode Scanning 1. Please eliminate the protect film in front of scanner at the first. 2. Please run a barcode application program 3. Please use the scan bean to center of barcode Please adjust the range in accordance with barcode size It will stop to read if user deviates from reading range after 5 seconds [Correct way to read the barcode] 1.Please bring it close to barcode in case of smaller barcode. This device can read the barcode in range of 40~300mm. If you have failure to read the barcode, please do check the angle and range 2. Laser beam will be shown up as a clear red line when using it at the barcode 1D 2D [Incorrect way to read the barcode] 1. Laser bean have to be crossed in the barcode 2. If laser beam partly will be shown up on the barcode, it doesn`t work well. 1D 2D 24

2. WiFi Connection AT911N enable to explain wireless communication including APN since it can communicate through 802.11 a/b/g/n radio.

25 2. WiFi Connection AT911N enable to explain wireless communication including APN since it can communicate through a/b/g/n radio. AT911N supports the TCP/IP network protocol and AT911N directly uses the TCP/IP and host computer at this protocol Device is OFF state at the first. 2.1 WiFi Connection and Termination [Menu] -> [Application] -> [Settings] -> [Wi-Fi] 25

26 3. Bluetooth This user manual includes BCM4329 COMBO Module which applied to AT Bluetooth Connection/Termination [Menu] -> [Application] -> [Settings] -> [Bluetooth] 1. Bluetooth Function Start 26

Check if GPS reception is normally worked in the open place 2.

27 4. GPS Module AT911Ncan install the GPS system as an option, and GPS Module will be installed on top of AT911N into Built-in shape 4.1 GPS Demo Program Execution [Menu] -> [Application] -> [GPS Test] Execute the GPS Test program Confirm GPS reception Data: 1. Check if GPS reception is normally worked in the open place 2. Actual GPS Data can be different with surrounding environment (Around 3 ~ 10 Minutes) Device can receive the GPS Data easily, after its GPS data is the one that was received in the past Screen for GPS Test execution 27

28 5. Use of Camera AT911N is installed with 5.0 mega pixel and brightness, resolution revision, screen capture and so on can be adjusted by user 5.1 Use of Camera [Menu] -> [Application] -> [Camera] Execute the camera program Screen for Camera execution 28

29 6. Use of NFC13.56MHz RFID Reader AT911N can internally install the NFC module as an option and it can read the tag in range of3~8.5cm in accordance with ISO standard. In case of Mifare tag, it can read in range of 1~3.5cm. NFC tag can be also read. 6.1 NFC Execution [Menu] -> [Application] -> [Settings] -> [More...] 6.2 NFC ON/OFF Settings NFC Power can be set by checkbox as ON/OFF 29

30 6.3 UHF 900Mhz RFID Program [Menu] -> [Application] -> [Settings] -> [ATUHF Demo] Execute ATUHF Demo program Screen for ATUHF Demo execution 30

31 Chapter 5. Appendix Product Specification Performance Characteristics Processor Operating System Memory Display Weight Operating Temp. Storage Temp. Humidity Drop Spec. Dust & Water Proof Physical Characteristics Audio Standard I/O Port Expansion Slot Notification Dimensions(L x W x H) Battery Supply Main Battery Power Adapter Data Capture Device Barcode Engine Camera Network Characteristics WLAN Bluetooth Radio GNSS UHF 900 Mhz Reader/Writer Frequency Reading range Writing range RF output Protocol Special function Dual-Core 1.0 GHz Android 4.2 (Jelly Bean) 1GB RAM / 8GB ROM 4 WVGA with IPS TFT LCD, 480Wx800L with Backlight Capacitive Touch Screen 270g (PDA only, without battery) -20 ~ ~ 70 95% non-condensing 1.5M Drop to concrete IP65 Phone Receiver, Speaker, Ear Jack, Microphone USB 2.0 Client 1Micro SD Slot (SDHC), 1SIM Slot Vibrator and LED, Speaker 145 x 75 x 27(31.5)mm Lithium-Ion 3.7V 2,200mAh (Rechargeable) Input AC110V ~ 240V / Output DC 5V 3A 1D Laser or 2D Imager Barcode Scanner CMOS 5 MEGA Pixel Auto Focus with Flash IEEE a/b/g/n Compliant Class II, v2.1 + EDR MODEM 3G (GSM / GPRS / EDGE / WCDMA / HSPA+) Internal Antenna (GPS + Glonas) 860MHz~960MHz 0M ~ 6M (According to Tag & Environment) 0M ~ 3M (According to Tag & Environment) 1W (MAX) GEN2, ISO/IEC C Anti-Collision 31

32 HF 13.56Mhz Reader/Writer Applied RFID Tag Reading range Gun Handle Gun Handle Grip (Pistol Grip) Gun Handle Battery NFC, ISO15693, MIFARE, ISO14443 A/B* According to Tag : 0 ~ 5Cm (Internal) Body, UHF /HF Available Lithium-Ion 3.7V 5,200mAh (Rechargeable)* * All Features and specifications described are subject to change without notice. 32

33 34

AB700. Guide for Customer

AB700. Guide for Customer AB700 Guide for Customer ATID Co., Ltd Copyright 2006 ATID Co., Ltd. An Unpublished Work All right reserved. No part of the contents of this documentation or the procedures described there in may be reproduced