DEX-P9R. Owner s Manual. Multi-CD/DVD/DAB control CD player with RDS tuner ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

Transcription

1 Multi-CD/DVD/DAB control CD player with RDS tuner Owner s Manual DEX-P9R This product conforms to new cord colors. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

2 Contents Key Finder... 4 Head Unit... 4 Remote Controller... 4 Opening and Closing the Remote Controller Cover When the Cover is Closed - When the Cover is Open Remote Controller and Care... 7 Using the Remote Controller... 7 Batteries... 8 Before Using This Product... 9 About This Product... 9 About This Manual... 9 Resetting the Microprocessor... 9 Precaution In Case of Trouble Detaching and Replacing the Front Panel Theft Protection Detaching the Front Panel - Replacing the Front Panel - Warning Tone Setting Up the Environment for Use Setting Up the Environment for Use Operation at the Initial Setting Screen Accessing the Initial Setting Screen - Exit from the Initial Setting Screen Setting the Clock Switching to the Clock Adjustment Screen - Setting the Clock - Setting the Clock by Time Signal - Off Clock - Returns to the Initial Setting Screen Setting the Display Switching to the Display Setting Screen - Setting the Brightness - Setting the Dimmer - Selecting the Wallpaper - Selecting the Reverse Mode - Returns to the Initial Setting Screen Setting the General Environment Switching to the General Environment Setting Screen - Switching the AUX Mode - Setting the Warning Tone - Turning the Confirmation Sound ON/OFF - Setting the DAB Priority - Switching the Auto PI Seek - Changing the FM Tuning Step - Returns to the Initial Setting Screen Setting the Menu Lock About the Menu Lock - Switching to the Menu Lock ON/OFF Basic Operation To Listen to Music Switching Power OFF

3 Tuner Operation Basic Operation of Tuner Operation at the Tuner Setting Screen Accessing the Tuner Setting Screen - Exit from the Tuner Setting Screen Operating Each function Best Stations Memory - Local Seek Tuning - Switching to the Preset Tuning Screen - Preset Tuning Using the RDS Functions What is RDS? Alternative Frequency function Activating/Deactivating the AF function PI Seek function PI Seek - Auto PI Seek (for preset station) PTY function Searching the PTY - News Program Interruption Setting - PTY Alarm - Canceling Announcements - PTY List Traffic Announcement Standby function Activating/Deactivating the TA function - Canceling Traffic Announcements - Adjusting the TA Volume - TP Alarm function Regional function Activating the Regional function Radio Text Radio Text Display - Storing Radio Text in Memory - Recalling Preset Radio Text Built-in CD Player Operation Basic Operation of Built-in CD Player Operation at the Built-in CD Setting Screen Accessing the Built-in CD Setting Screen - Exit from the Built-in CD Setting Screen Operating Each function Repeat Play - Random Play - Scan Play - Pause - Changing the Display Mode - Disc Title Input Multi-CD Player Operation Basic Operation of Multi-CD Player Operation at the Multi-CD Setting Screen Accessing the Multi-CD Setting Screen - Exit from the Multi-CD Setting Screen Operating Each function Repeat Play - Random Play - Scan Play - Pause - Changing the Display Mode - Disc Number Search Disc Title Disc Title Input - Selecting Discs by Disc Title List ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 2

4 Contents DVD Player Operation Basic Operation of DVD Player Operation at the DVD Setting Screen Accessing the DVD Setting Screen - Exit from the DVD Setting Screen Operating Each function Repeat Play - Random Play - Scan Play - Pause - Changing the Display Mode - Disc Number Search - Disc Title Input DAB Tuner Operation Basic Operation of DAB Tuner Operation at the DAB Tuner Setting Screen Accessing the DAB Tuner Setting Screen - Exit from the DAB Tuner Setting Screen Operating Each function Switching to the Preset Tuning Screen - Preset Tuning - Announcement Support function - Service Component function - Dynamic Label function - Available PTY function - Service Follow function TV Tuner Operation Basic Operation of TV Tuner Operation at the TV Tuner Setting Screen Accessing the TV Tuner Setting Screen - Exit from the TV Tuner Setting Screen Operating Each function Best Stations Sequential Memory - Switching to the Preset Tuning Screen - Preset Tuning Audio Adjustment Switching to the Audio Adjustment Screen Fader/Balance Adjustment - Bass/Treble Adjustment - Source Level Adjustment Other Functions Using the AUX Source Selecting the AUX Source - AUX Title Input Cellular Telephone Muting Turn OFF the Display Indication CD Player and Care Precaution Built-in CD Player s Error Message Connecting the Units Setting Examples Attaching the noise filter Connecting without Audio Unit (DEQ-P9) Connecting with Audio Unit (DEQ-P9) Installation Installation with the rubber bush Removing the unit Installing the Remote Control Unit Fitting the Remote Control Unit Fitting horizontally - Fitting vertically Installation Using Only the Mounting Base Installation Using the Mounting Base and the Bracket Method A - Method B Specifications

5 Key Finder Head Unit VOLUME Signal receiver Remote Controller In this system, the available functions and the menu display vary depending on the condition of the remote controller in use. Opening the cover enables the SHIFT, RETURN and FUNCTION buttons 1 6 inside the unit. For more details, refer to the page 5. CD button ATT button This lets you quickly lower volume level (by about 90%). Press once more to return to the original volume level. MENU button DISPLAY button SOURCE button RESET button AUX button Closed state DISPLAY OFF indicator BAND button TUNER button VOLUME TA button 5/ /2/3 buttons BAND button SHIFT button RETURN button Open state 5/ /2/3 buttons EJECT/OPEN button FUNCTION buttons 1 6 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 4

6 Key Finder Opening and Closing the Remote Controller Cover When the remote controller is opening the cover enables to operate the SHIFT, RETURN and FUNCTION buttons 1 6 inside the unit. Menu displays with cover open and closed in this system, the available functions and the menu display vary depending on the condition of the remote controller in use. Remote Controller Cover closed Cover open Menu display Closed State Open State 5

7 When the Cover is Closed Closing the cover of the remote controller makes the menu display to the closed state. Menu display in closed state Example: Built-in CD Screen Menu display in closed state: Current mode and functions which are ON are displayed. When the Cover is Open Opening the cover of the remote controller makes the menu display to the open state. Menu display in open state Example: Built-in CD Setting Screen Positions of menu items on the display correspond to the positions of FUNCTION buttons 1 6. Menu display in open state: Using FUNCTION buttons 1 6, operable functions are displayed. When the cover is closed in the middle of operation Closing the cover during operation releases the previous operation and returns the menu display to the closed mode. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 6

8 Remote Controller and Care Using the Remote Controller This product is equipped with a remote controller. You can perform some operations with the head unit, however, most of operations can be conducted with the remote controller. Point the remote controller in the direction of the signal receiver to operate. When the remote controller is not in use, attach it firmly to the provided mounting base. Precaution: Do not store the remote controller in high temperatures or direct sunlight. The remote controller may not function properly in direct sunlight. Do not let the remote controller fall onto the floor, where it may become jammed under the brake or accelerator pedal. 7

9 Batteries Remove the cover on the back of the remote controller and insert the batteries with the (+) and ( ) poles pointing in the proper direction. Precaution: Use only AAA or IEC R V batteries. Remove the batteries if the remote controller is not used for a month or longer. Do not attempt to recharge the supplied batteries. Do not mix new and used batteries. In the event of battery leakage, wipe the remote controller completely clean and install new batteries. When disposing of used batteries, please comply with governmental regulations or environmental public institution s rules that apply in your country/area. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 8

10 Before Using This Product About This Product This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). The tuner frequencies on this product are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals. About This Manual This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are not self-explanatory. This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this product. It is especially important that you read and observe the Precaution on page 10 and in other sections. This manual mainly explains the remote controller operation. In some functions, you can perform the same operations with the head unit, however, the remote controller offers a number of buttons such as ATT, TA, SHIFT, MENU, RETURN and FUNCTION buttons 1 6 which are not provided on the head unit. And most of operations can be conducted with the remote controller. Resetting the Microprocessor The microprocessor must be reset under the following conditions: When using this product for the first time after installation. When the machine fails to operate properly. When strange (incorrect) messages appear on the display. To reset the microprocessor, press the RESET button on the head unit with a pen tip or other pointed instrument. 9

11 Precaution A CLASS 1 LASER PRODUCT label is affixed to the bottom of the player. CLASS 1 LASER PRODUCT The Pioneer CarStereo-Pass is for use only in Germany. Keep this manual handy as a reference for operating procedures and precautions. Always keep the volume low enough for outside sounds to be audible. Protect the product from moisture. If the battery is disconnected, the preset memory will be erased and must be reprogrammed. In Case of Trouble Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 10

12 Detaching and Replacing the Front Panel Theft Protection The front panel of the head unit is detachable to discourage theft. Precaution: Never use force or grip the display tightly when removing or replacing the front panel. Avoid subjecting the front panel to excessive shocks. Keep the front panel out of direct sunlight and high temperatures. Detaching the Front Panel 1. Open the front panel. Precaution: A few seconds after turning the ignition switch to ON/OFF, the front panel automatically moves. When this happens, your fingers may become jammed in the panel, so keep your hands away from it. 2. Slide and remove the front panel toward you. Take care not to grip the front panel tightly or drop it. Release Section When removing the front panel, be sure to hold the corrugated release section on the rear of the front panel while pulling. 3. Use the protective case provided to store/carry the detached front panel. 11

13 Replacing the Front Panel 1. Make sure the inner cover is closed. 2. Replace the front panel by clipping it into place. Warning Tone If the front panel is not detached within 5 seconds after the ignition is turned off, a warning tone will sound. You can cancel the Warning Tone function. (Refer to page 19.) ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 12

14 Setting Up the Environment for Use Setting Up the Environment for Use Choose the way to use the head unit, including adjustment of clock and selection of wallpaper. Some functions are not available unless their setting is selected. Set up the environment to suit the system to be used. Operation at the Initial Setting Screen Accessing the Initial Setting Screen 1. Open the cover of the remote controller. 2. Press the SHIFT button. This switches to Initial Setting Screen. 3. Select the function by pressing the FUNCTION buttons Initial Setting Screen Setting the Clock (See page 15.) Setting the Display (See page 17.) Setting the Menu Lock (See page 22.) Setting the General Environment (See page 19.) 13

15 Exit from the Initial Setting Screen Close the cover of the remote controller. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 14

16 Setting Up the Environment for Use Setting the Clock Switching to the Clock Adjustment Screen Press the FUNCTION button 1 on Initial Setting Screen. This switches to Clock Adjustment Screen and enables clock setting. Setting the Clock 1. Press the 2/3 buttons and move the cursor to the section (hour, minute) to be adjusted. 2. Press the 5/ buttons to set the clock. Holding these buttons down extends the operations continuously. Seconds are not displayed. However, when releasing the buttons after setting the time, the clock starts from zero second. 15

17 Setting the Clock by Time Signal Press the FUNCTION button 2 on Clock Adjustment Screen to reset the minute display. As the clock starts from zero seconds when pressing the button, the clock can be set using the time signal (radio, telephone, etc). From 00 to 29 minutes, the hour remains the same, making the minute display 00. From 30 to 59 minutes, it is rounded up to the next hour. Off Clock When the sources are OFF, the Time appears on the display. Press the FUNCTION button 1 on Clock Adjustment Screen switches the Clock Display ON/OFF. When the display shows the operation screen of each source, the clock time is always displayed on the screen. Returns to the Initial Setting Screen Press the RETURN button. The display returns to Initial Setting Screen. The minute display is reset to 00. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 16

18 Setting Up the Environment for Use Setting the Display Switching to the Display Setting Screen Press the FUNCTION button 2 on Initial Setting Screen. This switches to Display Setting Screen and enables display setting. Setting the Brightness If it is hard to read the display, you can adjust the brightness for better legibility. Press the 2/3 buttons on Display Setting Screen adjusts the brightness. The display shows Setting the Dimmer To enable this product s display from being too bright at night, when the vehicle s head lights are turned ON the display is dimmed. You can switch this function ON/OFF. Press the FUNCTION button 1 on Display Setting Screen switches the Dimmer ON/OFF. 17

19 Selecting the Wallpaper This product is equipped with three types of wallpaper. Press the FUNCTION button 2 on Display Setting Screen switches the Wallpaper. Selecting the Reverse Mode If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds. The initial setup is Reverse Mode ON. Press the FUNCTION button 3 on Display Setting Screen switches the Reverse Mode ON/OFF. Returns to the Initial Setting Screen Press the RETURN button. The display returns to Initial Setting Screen. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 18

20 Setting Up the Environment for Use Setting the General Environment Switching to the General Environment Setting Screen Press the FUNCTION button 3 on Initial Setting Screen. This switches to General Environment Setting Screen and enables general environment setting. Switching the AUX Mode It is possible to use auxiliary (AUX) equipment with this product. Activate the AUX mode when using external equipment with this product. Press the FUNCTION button 1 on General Environment Setting Screen switches the AUX ON/OFF. Setting the Warning Tone You can switch the Warning Tone function ON/OFF. (Refer to Warning Tone on page 12.) Press the FUNCTION button 2 on General Environment Setting Screen switches the Warning Tone ON/OFF. 19

21 Turning the Confirmation Sound ON/OFF The beep that sounds when buttons are pressed can be enabled or disabled (ON/OFF). The initial setting is ON. Press the FUNCTION button 3 on General Environment Setting Screen switches the Confirmation Sound ON/OFF. Setting the DAB Priority When a Hide-away DAB tuner (e.g. GEX-P700DAB) is connected, you can set the product in this mode so that the interruption of traffic information from the Hide-away DAB tuner takes precedence over this product s RDS Traffic Announcement (TA) function. 7 When it is ON During DAB reception, when the selected Service Component supports Road Traffic Flashes and Transport Flashes, reception is not interrupted by this product s RDS Traffic Announcement (TA). 7 When it is OFF Interruption is by the first received news flash from among this product s RDS and the Hide-away DAB traffic information broadcasts. Press the FUNCTION button 4 on General Environment Setting Screen switches the DAB Priority ON/OFF. You can only select to the DAB Priority Setting mode when a separately sold Hide-away DAB tuner (e.g. GEX-P700DAB) is connected. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 20

22 Setting Up the Environment for Use Switching the Auto PI Seek During Preset Station PI Seek operation, you can switch the Auto PI Seek function ON/OFF. (Refer to PI Seek function on page 30.) Press the FUNCTION button 5 on General Environment Setting Screen switches the Auto PI Seek ON/OFF. Changing the FM Tuning Step Normally set at 50 khz during Seek tuning in the FM mode, the tuning step changes to 100 khz when the AF or TA mode is activated. It may be preferable to set tuning step to 50 khz in the AF mode. Press the FUNCTION button 6 on General Environment Setting Screen selects the desired tuning step. The tuning step remains set at 50 khz during Manual tuning. The tuning step returns to 100 khz if the battery is temporarily disconnected. Returns to the Initial Setting Screen Press the RETURN button. The display returns to Initial Setting Screen. 21

23 Setting the Menu Lock About the Menu Lock If you switch the Menu Lock ON, it is possible to refuse the opened remote controller operation to adjust the Audio Adjustment. It is useful when you do not want to readjust the data by mistake. Switching to the Menu Lock ON/OFF It is possible to switch ON/OFF the Menu Lock. Press the FUNCTION button 4 on Initial Setting Screen switches the Menu Lock ON/OFF. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 22

24 Basic Operation To Listen to Music The following explains the initial of operations required before you can listen to music. Loading a disc in this product. (Refer to page 40.) 1. Select the desired source (e.g. tuner). Each press changes the Source... 7 Head Unit Each press of the SOURCE button selects the desired source in the following order: Built-in CD player = Multi-CD player = DVD player = TV = Tuner = DAB (Digital Audio Broadcasting) Tuner = External Unit 1 = External Unit 2 = AUX 7 Remote Controller Each press of the button selects the desired source in the following order: CD button : Built-in CD player = Multi-CD player = DVD player = OFF AUX button : External Unit 1 = External Unit 2 = AUX = OFF TUNER button : TV = Tuner = DAB (Digital Audio Broadcasting) Tuner = OFF External Unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this product. Two External Units can be controlled by this product, although External is displayed whether you select External Unit 1 or External Unit 2. When two External Units are connected, the allocation of them to External Unit 1 or External Unit 2 is automatically set by this product. In the following cases, the sound source will not change: * When a product corresponding to each source is not connected to this product. * No disc is set in this product. * No magazine is set in the Multi-CD player. * No magazine is set in the Multi-DVD player. * AUX (external input) is set to OFF. (Refer to page 19.) When this product s blue/white lead is connected to the car s Auto-antenna relay control terminal, the car s Auto-antenna extends when this product s source is switched ON. To retract the antenna, switch the source OFF. 23

25 2. Raise or lower the volume. The display shows --- db 00 db. Switching Power OFF Turn the source OFF. Hold for 1 second 7 Head Unit To switch the sources OFF, hold down the SOURCE button for 1 second. 7 Remote Controller Press the button and select the source OFF. CD button : Built-in CD player = Multi-CD player = DVD player = OFF AUX button : External Unit 1 = External Unit 2 = AUX = OFF TUNER button : TV = Tuner = DAB (Digital Audio Broadcasting) Tuner = OFF ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 24

26 Tuner Operation Basic Operation of Tuner This product s AF function can be switched ON and OFF. AF should be switched OFF for normal tuning operations. (Refer to page 29.) Manual and Seek Tuning You can select the tuning method by changing the length of time you press the 2/3 button. Manual Tuning (step by step) Seek Tuning 0.5 seconds or less 0.5 seconds or more If you continue pressing the button for longer than 0.5 seconds, you can skip broadcast stations. Seek Tuning starts as soon as you release the button. Stereo indicator lights when a stereo station is selected. Frequency Indicator Preset Number Indicator Band Indicator Band FM-1 = FM-2 = FM-3 = MW/LW Preset Tuning You can recall memorized stations by 5/ buttons. Changing the Display Each press of the DISPLAY button changes the display in the following order: Program Service Name PTY Label Program Service Name Frequency 25

27 Operation at the Tuner Setting Screen Accessing the Tuner Setting Screen 1. Open the cover of the remote controller. This switches to the Tuner Setting Screen. 2. Select the function by pressing the FUNCTION buttons Tuner Setting Screen Best Stations Memory (See page 27.) AF function (See page 29.) Regional function (See page 36.) Exit from the Tuner Setting Screen Local Seek Tuning (See page 27.) PTY function (See page 31.) Radio Text (See page 37.) To return to Tuner Screen, close the cover of the remote controller. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 26

28 Tuner Operation Operating Each function Best Stations Memory The BSM (Best Stations Memory) function stores stations in memory automatically. Press the FUNCTION button 1 for two seconds on Tuner Setting Screen switches the Best Stations Memory (BSM) ON. The stations with the strongest signals will be stored under FUNCTION buttons 1 6 and in order of their signal strength. To cancel the process, press the FUNCTION button 1 again before memorization is complete. Local Seek Tuning When Local mode is ON ( LOC.S displays), you can only select broadcast stations providing strong reception. Press the FUNCTION button 2 on Tuner Setting Screen switches the Local sensitivity. The Local sensitivity switches as follows: FM : LOC 1 = LOC 2 = LOC 3 = LOC 4 = LOC OFF MW/LW: LOC 1 = LOC 2 = LOC OFF The LOC 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. 27

29 Switching to the Preset Tuning Screen Press the SHIFT button on Tuner Setting Screen. This switches to Preset Tuning Screen and enables to preset the stations. To return to Tuner Setting Screen, press the SHIFT button again. Preset Tuning You can memorize broadcast stations in FUNCTION button 1 through 6 for easy, one-touch station recall. 7 Broadcast station preset memory Press the FUNCTION button 1 through 6 for two seconds on Preset Tuning Screen to memorize the broadcast stations in corresponding buttons. 7 Preset broadcast station recall Press the FUNCTION button 1 through 6 on Preset Tuning Screen to recall the broadcast stations memorized in corresponding buttons. Up to 18 FM stations (6 in FM-1, FM-2 and FM-3) and 6 MW/LW stations can be stored in memory. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 28

30 Using the RDS Functions What is RDS? RDS (Radio Data System) is a system for transmitting data along with FM programs. This data, which is inaudible, provides a variety of features such as: program service name, program type display, traffic announcement standby, automatic tuning and program type tuning, intended to aid radio listeners in tuning to a desired station. RDS service may not be provided by all stations. RDS functions, like AF (Alternative Frequencies search) and TA (Traffic Announcement standby), are only active when your radio is tuned to RDS stations. Alternative Frequency function The AF (Alternative Frequencies search) function is used to search for other frequencies in the same network as the currently tuned station. It automatically retunes the receiver to another frequency in the network which is broadcasting a stronger signal when there are problems with reception of the currently tuned station or better reception is possible on a different frequency. AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory with the AF indicator ON. When you recall a preset station, the tuner may update the preset station with a new frequency from the station s AF list. (This is only available when using presets on the FM-1 and FM-2 bands.) No preset number appears on the display if the RDS data for the station received differs from that for the originally stored station. Sound may be temporarily interrupted by another program during an AF frequency search. When the tuner is tuned to a non-rds station, the AF indicator flashes. AF can be switched ON or OFF independently for each FM band. Activating/Deactivating the AF function AF is set to ON by default. Press the FUNCTION button 3 on Tuner Setting Screen switches the AF ON/OFF while in an FM band. 29

31 PI Seek function The tuner searches for another frequency broadcasting the same programming. PI Seek appears on the display and the radio volume is muted during a PI Seek. The muting is discontinued after completion of the PI Seek, whether or not the PI seek has succeeded. If the PI Seek is unsuccessful, the tuner returns to the previous frequency. PI Seek If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is too weak for proper reception, the PI Seek will automatically start. Auto PI Seek (for preset station) When preset stations cannot be recalled, as when traveling long distances, the product can be set to perform PI Seek also during preset recall. The default setting for Auto PI Seek is OFF. Refer to Setting Up the Environment for Use for details on how to switch Auto PI Seek ON/OFF. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 30

32 Using the RDS Functions PTY function A PTY search is performed by program type as indicated in the PTY list (the program types are: News&Inf, Popular, Classics, Others). It also provides automatic tuning to emergency broadcasts (PTY alarm). There s no need to perform PTY Search settings again if they have previously been set. After switching to the PTY Search Setting mode in Step 1, just perform PTY Search in Step 3. Searching the PTY 1. Press the FUNCTION button 4 on Tuner Setting Screen switches the PTY Search Setting display. 2. Select one from among PTY with the 2/3 buttons. 3. Press the 5 button starts the PTY search. The tuner searches for a station broadcasting the desired PTY. To cancel the PTY Search, press the button. The program of some stations may differ from that indicated by the transmitted PTY. If no station broadcasting the selected programming type is found, NOT FOUND is displayed for about 2 seconds, and the tuner returns to the original station. 31

33 News Program Interruption Setting You can switch automatic reception of PTY code news programs ON/OFF. When a received news program ends, reception of the previous program resumes. Set interruption to ON or OFF. When N in NEWS indicator is displayed, it indicates that you have set interruption ON. When 3 is displayed on the left side of indicator, it indicates that the news program is received. PTY Alarm PTY Alarm is a special PTY code for announcements regarding emergencies such as natural disasters. When the tuner receives the radio alarm code, ALARM appears on the display and the volume adjusts to the TA volume. When the station stops broadcasting the emergency announcement, the system returns to the previous source. Canceling Announcements Hold for 2 seconds Press the TA button during announcement reception to cancel the announcement and return to the previous source. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 32

34 Using the RDS Functions PTY List Wide Narrow Details News&Inf News News. Affairs Info Sport Weather Finance Current affairs. General information and advice. Sports programs. Popular Pop Mus Popular music. Rock Mus Weather reports/meteorological information. Stock market reports, commerce, trading, etc. Contemporary modern music. Easy Mus Easy listening music. Oth Mus Other types of music, which can t be categorized. Jazz Jazz music based programs. Country Country music based programs. Nat Mus National music based programs. Oldies Oldies music, Golden age based programs. Folk Mus Folk music based programs. Classics L. Class Light classical music. Classic Serious classical music. Others Educate Educational programs. Drama All radio plays and serials. Culture Programs concerned with any aspect of national or regional culture. Science Programs about nature, science and technology. Varied Light entertainment programs. Children Children s programs. Social Social affairs programs. Religion Religion affairs programs or services. Phone In Phone in based programs. Touring Travel programs, not for announcements about traffic problem. Leisure Programs about hobbies and recreational activities. Document Documentary programs. 33

35 Traffic Announcement Standby function The TA (Traffic Announcement standby) function lets you receive traffic announcements automatically, no matter what source you are listening to. The TA function can be activated for either a TP station (a station that broadcasts traffic information) or an enhanced other network s TP station (a station carrying information which cross-references TP stations). Activating/Deactivating the TA function 1. Tune in a TP or enhanced other network s TP station. The TP indicator TRAFFIC lights when the tuner is tuned to a TP station or an enhanced other network s TP station. 2. Activate the TA function. The 3TRAFFIC indicator lights, indicating that the tuner is waiting for traffic announcements. If you switched TA function ON when you are tuned in to neither a TP nor enhanced other network s TP station, only T in TRAFFIC indicator is displayed. Repeat the preceding operation when no traffic announcement is being received to deactivate the TA function. The system switches back to the original source following traffic announcement reception. The TA function can be activated from sources other than tuner if the tuner was last set to the FM band but not if it was last set to the MW/LW band. If the tuner was last set to FM, turning on the TA function lets you operate other tuning functions while listening to sources other than tuner. Only TP or enhanced other network s TP stations are tuned in during the Seek Tuning mode when the 3TRAFFIC or T indicator is ON. Only TP or enhanced other network s TP stations are stored by BSM when the 3TRAFFIC or T indicator is ON. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 34

36 Using the RDS Functions Canceling Traffic Announcements Press the TA button while a traffic announcement is being received to cancel the announcement and return to the original source. The announcement is canceled but the tuner remains in the TA mode until the TA button is pressed again. Adjusting the TA Volume When a traffic announcement begins, the volume adjusts automatically to a preset level to enable you to hear the announcement clearly. Set the volume by adjusting it during reception of a traffic announcement. The newly set volume is stored in memory and recalled for subsequent traffic announcements. TP Alarm function About 30 seconds after the 3TRAFFIC indicator turns to T due to a weak signal, a 5 second beep sounds to remind you to select another TP or enhanced other network s TP station. If you are listening to the tuner, tune in another TP station or enhanced other network s TP station. In sources other than tuner, the tuner automatically seeks out the TP station with the strongest signal in the current area 10 (or 30)* seconds after the 3TRAFFIC indicator turns to T. * Time taken before Seek begins. TA function ON TA, AF functions ON 10 seconds 30 seconds 35

37 Regional function When AF is used to retune the tuner automatically, the Regional function limits the selection to stations broadcasting regional programs. Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area). The preset number may disappear on the display if the tuner tunes in a regional station which differs from the originally set station. Activating the Regional function The Regional function can be turned ON independently for each FM band. Press the FUNCTION button 5 on Tuner Setting Screen switches the Regional function ON/OFF. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 36

38 Using the RDS Functions Radio Text This tuner can display Radio Text data transmitted by RDS stations, such as station information, the name of the currently broadcast song and the name of the artist. When Radio Text is received, the RT indicator lights. The tuner automatically memorizes the three latest Radio Text broadcasts received, replacing text from the least recent reception with new text when it is received. You can store data from up to six Radio Text transmissions in FUNCTION buttons 1 6. Radio Text Display 1. Press the FUNCTION button 6 on Tuner Setting Screen switches the Radio Text display. When no Radio Text is currently being received, NO TEXT is displayed. 2. Recalling the three latest Radio Text broadcasts from the tuner s memory with the 2/3 buttons. Pressing the button switches between the four Radio Text data displays. To return to Tuner Setting Screen, press the RETURN button. If there is no Radio Text data stored in the tuner, this button does not operate. 37

39 Storing Radio Text in Memory 1. Perform Radio Text Display steps 1 and 2, and then select the Radio Text you want to store in memory. 2. Press the FUNCTION button 1 through 6 for two seconds to memorize the Radio Text in corresponding buttons (e.g. Press the FUNCTION button 4 for two seconds). Recalling Preset Radio Text 1. Switch to the Radio Text display. 2. Press the FUNCTION button 1 through 6 to recall the Radio Text memorized in corresponding buttons (e.g. Press the FUNCTION button 4). ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 38

40 Built-in CD Player Operation Basic Operation of Built-in CD Player Eject Press the EJECT/OPEN button one time, the front panel opens and then the disc is ejected. In case of opening the front panel, you can just eject a CD. The CD function can be turned ON/OFF with the disc remaining in this product. (Refer to page 23.) A disc left partially inserted after ejection may incur damage or fall out. You can eject the CD by pressing and holding EJECT/OPEN button with opening the front panel when the CD loading or ejecting cannot operate properly. Track Number Indicator Play Time Indicator Switching the Display (only for CD TEXT Discs) Each press of the DISPLAY button changes the display in the following order: Play Time Disc Title Play Time Disc Artist Play Time Track Title Play Time Track Artist With text longer than 20 letters, you can scroll to see the rest of the text by pressing the DISPLAY button for 2 seconds. A CD TEXT disc is a CD featuring recorded text information such as Disc Title, Artist Name and Track Title. If certain text information is not recorded on a CD TEXT disc, No ~ (e.g. No Title ) is displayed. 39

41 Track Search and Fast Forward/Reverse You can select between Track Search or Fast Forward/Reverse by pressing the 2/3 button for a different length of time. Track Search Fast Forward/Reverse 0.5 seconds or less Continue pressing CD Loading Slot If a CD is inserted, the front panel is closed automatically. The Built-in CD player plays one standard 12 cm or 8 cm (single) CD at a time. Do not use an adapter when playing 8 cm CD. If a disc cannot be inserted fully or playback fails, make sure the recorded side is down. Push the EJECT/OPEN button and check the disc for damage before reinserting it. If the Built-in CD player cannot operate properly, an error message (such as ERROR-14 ) appears on the display. Refer to Built-in CD Player s Error Message on page 79. Do not insert anything other than a CD into the CD Loading Slot. Open Press the EJECT/OPEN button for 2 seconds, and you can open the front panel without ejecting a CD. In case of opening the front panel, you can close it. WARNING: Do not use with the front panel left open. If you do leave it open, it may result in injury in the event of an accident. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 40

42 Built-in CD Player Operation Operation at the Built-in CD Setting Screen Accessing the Built-in CD Setting Screen 1. Open the cover of the remote controller. This switches to the Built-in CD Setting Screen. 2. Select the function by pressing the FUNCTION buttons 1, 2, 3, 4 and 6. 7 Built-in CD Setting Screen Repeat Play (See page 42.) Random Play (See page 42.) Pause (See page 43.) Scan Play (See page 43.) Display Mode (See page 44.) Exit from the Built-in CD Setting Screen To return to Built-in CD Screen, close the cover of the remote controller. 41

43 Operating Each function Repeat Play Repeat Play plays the same track repeatedly. Press the FUNCTION button 1 on Built-in CD Setting Screen switches the Repeat Play ON/OFF. If you perform Track Search or Fast Forward/Reverse, Repeat Play is automatically canceled. Random Play Random Play plays the tracks on a CD in random order for variety. Press the FUNCTION button 2 on Built-in CD Setting Screen switches the Random Play ON/OFF. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 42

44 Built-in CD Player Operation Scan Play Scan Play plays the first 10 seconds or so of each track on a CD in succession. 1. Press the FUNCTION button 3 on Built-in CD Setting Screen switches the Scan Play ON. 2. When you find the desired track, cancel the Scan Play with the FUNCTION button 3. Scan Play is canceled automatically after all the tracks on a disc have been scanned. Pause Pause pauses the currently playing track. Press the FUNCTION button 4 on Built-in CD Setting Screen switches the Pause ON/OFF. 43

45 Changing the Display Mode Press the FUNCTION button 6 on Built-in CD Setting Screen switches the Display Mode in the following order: Normal Display += Simple Display Disc Title Input You can input up to 48 disc titles for CDs in the Built-in CD player. (Refer to Disc Title Input on page 50 under Multi-CD Player Operation.) After the title for 48 discs have been entered, data for a new disc will overwrite the oldest one. If you connect a Multi-CD player, you can input disc titles for up to 100 discs. When playing a CD TEXT disc on this product, you cannot switch to this mode. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 44

46 Multi-CD Player Operation Basic Operation of Multi-CD Player This product can control a Multi-CD player (sold separately). Track Search and Fast Forward/Reverse You can select between Track Search or Fast Forward/Reverse by pressing the 2/3 button for a different length of time. Track Search Fast Forward/Reverse 0.5 seconds or less Continue pressing Track Number Indicator Disc Number Indicator Play Time Indicator Disc Search Switching the Display (When playing a CD TEXT disc on a CD TEXT compatible Multi-CD Player) Each press of the DISPLAY button changes the display in the following order: Play Time Disc Title Play Time Disc Artist Play Time Track Title Play Time Track Artist With text longer than 20 letters, you can scroll to see the rest of the text by pressing the DISPLAY button for 2 seconds. A CD TEXT disc is a CD featuring recorded text information such as Disc Title, Artist Name and Track Title. If certain text information is not recorded on a CD TEXT disc, No ~ (e.g. No Title ) is displayed. 45

47 Operation at the Multi-CD Setting Screen Accessing the Multi-CD Setting Screen 1. Open the cover of the remote controller. This switches to the Multi-CD Setting Screen. 2. Select the function by pressing the FUNCTION buttons Multi-CD Setting Screen Repeat Play (See page 47.) Scan Play (See page 48.) Disc List (See page 52.) Exit from the Multi-CD Setting Screen Random Play (See page 48.) Pause (See page 49.) Display Mode (See page 49.) To return to Multi-CD Screen, close the cover of the remote controller. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 46

48 Multi-CD Player Operation Operating Each function Repeat Play There are three repeat play ranges: One-track Repeat, Disc Repeat and Multi-CD player Repeat. Default repeat play range is Multi-CD player Repeat. Press the FUNCTION button 1 on Multi-CD Setting Screen switches the repeat play range as follows: MAGA = REPEAT = D.REPEAT 7 Play Mode Display MAGA REPEAT D.REPEAT Play range Multi-CD player Repeat One-Track Repeat Disc Repeat If you select other discs during the repeat play, the repeat play range changes to Multi-CD player Repeat. If you perform Track Search or Fast Forward/Reverse during One-track Repeat, the repeat play range changes to Disc Repeat. 47

49 Random Play Tracks are played at random within the selected repeat play range as explained in Repeat Play on page 47. Press the FUNCTION button 2 on Multi-CD Setting Screen switches the Random Play ON/OFF. After selecting the desired repeat play range from those referred to in Repeat Play on page 47, switch Multi-CD Player Random Play ON. One-track Repeat changes to the Disc Repeat when you switch the Random Play ON. Scan Play In the Disc Repeat, the beginning of each track on the selected disc is scanned for about 10 seconds. In the Multi-CD player Repeat, the beginning of the first track on each disc is scanned for about 10 seconds. 1. Press the FUNCTION button 3 on Multi-CD Setting Screen switches the Scan Play ON. After selecting the desired repeat play range from those referred to in Repeat Play on page 47, switch Multi-CD Player Scan Play ON. 2. When you find the desired track (or disc), cancel the Scan Play with the FUNCTION button 3. Display Play range T. Scan Disc Repeat D. Scan Multi-CD player Repeat Scan Play is canceled automatically after all the tracks or discs have been scanned. One-track Repeat changes to the Disc Repeat when you switch the Scan Play ON. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 48

50 Multi-CD Player Operation Pause Pause pauses the currently playing track. Press the FUNCTION button 4 on Multi-CD Setting Screen switches the Pause ON/OFF. Changing the Display Mode Press the FUNCTION button 6 on Multi-CD Setting Screen switches the Display Mode in the following order: Normal Display += Simple Display Disc Number Search You can select discs directly with the FUNCTION buttons 1 6. Just press the number corresponding to the disc you want listen to. 1. Press the SHIFT button on Multi-CD Setting Screen. This switches to disc number search screen and enables select the disc. 2. Select the desired disc with the FUNCTION button 1 through 6. When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the SHIFT button again on the disc number search screen. 49

51 Disc Title Disc Title Input You can input Titles up to 20 letters long for up to 100 discs. Using this function lets you easily search for and select a desired disc for play. You can input Titles up to 10 letters long depending on the combined Multi-CD player. 1. Play the disc you wish to input the disc title. 2. Press the SHIFT button for two seconds on the Multi-CD Setting Screen. This switches to disc title input screen. If you press the SHIFT button for 2 seconds on disc number search screen or disc title list screen, this switches to disc title input screen. When playing a CD TEXT disc on a CD TEXT compatible Multi-CD player, you cannot switch to this mode. A CD TEXT disc is a CD featuring recorded text information such as Disc Title, Artist Name and Track Title. 3. Switch the desired character type with FUNCTION button 1. Each press of FUNCTION button 1 changes the Character type in the following order: Upper case alphabet (Capital Letter), Numbers and Symbols = Lower case alphabet (Small Letter) = European letters (European Character), such as those with accents (e.g. á, à, ä, ç) You can select to input Numbers and Symbols by pressing FUNCTION button Select letters, numbers and symbols with the 5/ buttons. To insert a space, skip the box with the 3 button. 5. Move the box left and right with the 2/3 buttons. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Continued overleaf. 50

52 Multi-CD Player Operation 6. When you have completed title input, memorize by pressing the FUNCTION button 5. Titles remain in memory, even after the disc has been removed from the magazine, and are recalled when the disc is reinserted. After the titles for 100 discs have been entered, data for a new disc will overwrite the oldest one. To return to Multi-CD Setting Screen, press the FUNCTION button 6. 51

53 Selecting Discs by Disc Title List Follow the procedures below to play a disc for which you have input the title in a Multi- CD player or a CD TEXT disc on a CD TEXT compatible Multi-CD player. 1. Press the FUNCTION button 5 on Multi-CD Setting Screen switches the disc title list screen. 2. Select the desired disc title with the 2/3 buttons. When no disc is set in the magazine (disc tray), the disc number is automatically skipped. 3. Play the selected disc with the 5 button. To return to Multi-CD Setting Screen, press the RETURN button. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 52

54 DVD Player Operation Basic Operation of DVD Player This product can control a DVD player (sold separately). Chapter (Track) Search and Fast Forward/Reverse You can select between Chapter (Track) Search or Fast Forward/Reverse by pressing the 2/3 button for a different length of time. Chapter (Track) Search Fast Forward/Reverse 0.5 seconds or less Continue pressing Title Indicator Disc Number Indicator Chapter Indicator Play Time Indicator Disc Search 53

55 Operation at the DVD Setting Screen Accessing the DVD Setting Screen 1. Open the cover of the remote controller. This switches to DVD Setting Screen. 2. Select the function by pressing the FUNCTION buttons 1, 2, 3, 4 and 6. 7 DVD Setting Screen Scan Play (See page 56.) Repeat Play (See page 55.) Exit from the DVD Setting Screen Random Play (See page 56.) Pause (See page 57.) Display Mode (See page 57.) To return to DVD Screen, close the cover of the remote controller. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 54

56 DVD Player Operation Operating Each function Repeat Play You can select the desired repeat mode play range from the chapter (track), title or disc currently in play. Press the FUNCTION button 1 on DVD Setting Screen switches the repeat play range as follows: When DVD player is playing DVD When DVD player is playing CDs : DISC = CHAPTER = TITLE : DISC = REPEAT 7 DVD Display DISC CHAPTER TITLE Play range Disc Repeat Chapter Repeat Title Repeat 7 Video-CD and CD Display DISC REPEAT Play range Disc Repeat Track Repeat If you select other discs during the repeat play, the repeat play range changes to Disc Repeat. If you perform Chapter (Track) Search or Fast Forward/Reverse during Title Repeat or Chapter Repeat, the repeat play range changes to Disc Repeat. 55

57 Random Play Operable only when DVD Player is playing CDs. Random Play plays the tracks on a CD in random order for variety. Press the FUNCTION button 2 on DVD Setting Screen switches the Random Play ON/OFF. After selecting the desired repeat play range from those referred to in Repeat Play on page 55, switch DVD Player Random play ON. Scan Play Operable only when DVD Player is playing CDs. Scan Play plays the first 10 seconds or so of each track on a CD in succession. 1. Press the FUNCTION button 3 on DVD Setting Screen switches the Scan Play ON. 2. When you find the desired track, cancel the Scan Play with the FUNCTION button 3. Scan Play is canceled automatically after all the tracks on a discs have been scanned. ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS 56

58 DVD Player Operation Pause Pause pauses the currently playing track. Press the FUNCTION button 4 on DVD Setting Screen switches the Pause ON/OFF. Changing the Display Mode Press the FUNCTION button 6 on DVD Setting Screen switches the Display Mode in the following order: Normal Display += Simple Display Disc Number Search You can select discs directly with the FUNCTION buttons 1 6. Just press the number corresponding to the disc you want listen to. 1. Press the SHIFT button on DVD Setting Screen. This switches to disc number search screen and enables select the disc. 2. Select the desired disc with the FUNCTION button 1 through 6. Disc Title Input You can input up to 100 disc titles for CDs in the DVD player. (Refer to Disc Title Input on page 50 under Multi-CD Player Operation.) After the title for 100 discs have been entered, data for a new disc will overwrite the oldest one. You can input Titles up to 10 letters long. 57