Cube Clock Radio. Fall asleep and wake to your favorite music. idesign

Size: px

Start display at page:

Download "Cube Clock Radio. Fall asleep and wake to your favorite music. idesign"

Eustacia Wright
6 years ago
Views:

1 Cube Clock Radio Fall asleep and wake to your favorite music idesign

2 1 Table of contents Cautions, Warnings & FCC Information Location of Controls, Icons, Accessories & Compatible ipod Models Compatible ipod/iphone Models Back-up Battery Button Backlight Operation Setting the Clock Adjusting the Display Backlight Setting and Activating Alarm Setting and Activating Alarm Deactivating the Alarms Using Snooze Using the Sleep Function Power Listening to the Radio Connecting your ipod/iphone Playing and Pausing ipod/iphone Music Fast-Forwarding and Rewinding Songs Skipping Forward and Backward to a Song Adjusting the Volume Listening to an External Source Using AUX Out Specifications Troubleshooting Warranty

3 CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the unit s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. IMPORTANT SAFETY INSTRUCTIONS All of the safety and operating instructions should be read, adhered to and followed before the unit is operated. Save these instructions 2

4 DANGER To reduce the risk of electric shock, burns, fire or injury: Do not use while bathing or in a shower. Do not place or store unit where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. Do not reach for unit that has fallen into water. Unplug it immediately. Care should be taken so that objects do not fall and liquids are not spilled onto the unit. WARNING Close supervision is necessary when this unit is used by or near children. Use this unit only for its intended use as described in this manual. Unplug this unit during lightning storms or when unused for long periods of time. Never drop or insert an object into any opening. Protect the power cord from being walked on or pinched, particularly at plug outlets, convenience receptacles and the point where it exits the unit. Do not allow the cord to touch hot surfaces. Wrap the cord loosely around the unit when storing. The unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves or other units (including amplifiers) that produce heat. Avoid placing on top of stereo equipment that radiates heat. 3

5 8. 9. never block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked. Do not overload electrical outlet. Use only the power source as indicated. 10. Do not carry this unit by its cord or use the cord as a handle never operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water. If the unit s power supply cord or plug is damaged, do not attempt to fix it yourself. To avoid the risk of electric shock, do not disassemble or attempt to repair the unit. Incorrect repair can cause risk of electric shock or injury to persons when the unit is used. 13. Do not operate in the presence of explosive and/or flammable fumes. FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 4

6 Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. This equipment complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This equipment may not cause harmful interference. This equipment must accept any interference received, including interference that may cause undesired operation. Modifications not authorized by the manufacturer may void the user s authority to operate this device. BATTERY PRECAUTIONS Dispose of the old battery properly. Do not dispose of the old battery in a fire. Do not leave the battery where a child or pet could play with or swallow it. If the battery is swallowed, contact a physician immediately. The battery may explode if mistreated. Do not attempt to recharge or disassemble the battery. Use only a fresh battery of the required size and type. Do not mix old and new batteries, different types of batteries, or rechargeable batteries of different capacities. 5

7 LOCATION OF parts and CONTROLS Power Button AUX Mode Button Alarm 2 On/Off Button Clock Set Button Sleep Button Alarm 2 Set Button Volume/Set Dial Snooze Button Alarm 1 Set Button Alarm 1 On/Off Button 3 Radio Preset Buttons Back Button ipod/iphone Play/Pause Button Forward Button ipod/iphone Dock ipod/iphone Mode Button 17. Radio Mode AM/FM Button

8 LOCATION OF icons on LCD screen Clock AM/PM Icons Radio Band Radio Presets Alarm 2 Time Alarm 2 Wake-to Icons Alarm 1 Wake-to Icons Alarm 1 Time Radio Mode Icon ipod/iphone Auto Play Icon ipod/iphone Mode Icon

9 LOCATION OF parts and CONTROLS 1. Auxiliary Output 2. Auxiliary Input 3. FM Antenna Connection 4. AM Antenna Connection 5. DC Input 6. Back-up Battery Compartment (on bottom)

10 Included accessories AM Antenna FM Pigtail Antenna 3.5mm to 3.5mm Cable DC Adapter ipod/iphone Dock Adapters (7 Included) Compatible ipod/iphone Models ipod touch (2nd generation)* iphone 3GS* ipod touch (1st generation)* iphone 3G* ipod classic* iphone* ipod nano (5th generation)* ipod nano (4th generation)* *Dock adapter included 9

11 BACK-UP BATTERY Remove the pull tab from the BATTERY COMPARTMENT to activate back-up battery for first use. To replace the battery, remove the screw on the door of the BATTERY COMPARTMENT and lift the cover. 3. slide 1 CR-2032 button cell battery into the BATTERY COMPARTMENT, making sure that the positive side + is up and the edge of the battery slides under the positive contact. 4. Replace the BATTERY COMPARTMENT door and secure the screw. Note: The back-up battery is used ONLY to maintain the clock time, alarm time and radio presets during a power failure. All other features run off of DC power. Button Backlight Operation Press any button to illuminate button backlights for 5 seconds. SETTING the clock Plug the ADAPTER into a power outlet. Clock graphics appear on the display. Press and hold the Clock/Set button for 2 seconds and the hour will flash. Turn the VOLUME/SET dial to choose the hour. Press the CLOCK/SET button to save the hour. The minutes will flash. Turn the VOLUME/SET dial to choose the minutes. Press the TIME/SET button to save the minutes. The minutes will stop flashing and the current time will be saved and will show on the display. Note: If the CLOCK/SET button is not pressed while the hour or minutes are flashing, the unit will automatically save the settings after 5 seconds. 10

12 Adjusting the display backlight There are 5 backlight settings for the display: HIGH, MEDIUM, LOW, DIM and OFF. Press the SNOOZE button for 3 seconds and continue holding to toggle through each of the backlight settings. The backlight setting will change every 3 seconds while the SNOOZE button is being pressed and held. If the backlight is set to OFF, you may press the SNOOZE bar once to turn the backlight to LOW for 5 seconds. Note: If the backlight is set to OFF when the alarm sounds or during Snooze, the backlight will automatically illuminate on LOW. Backlight will remain on during Snooze. SETTING and activating ALARM Press and hold the ALARM 1 SET button for 2 seconds. The clock will go into Alarm 1 Set mode. Alarm 1 hour will flash. Use the VOLUME/SET dial to choose the hour. Press the ALARM 1 SET button to save the hour. The minutes will flash. Use the VOLUME/SET dial to choose the minutes. Press the ALARM 1 SET button to save the minutes. The Alarm 1 time is saved. The Wake-to choice icon will flash. Use the VOLUME/SET dial to select your wake-to choice from ipod, Radio or Buzzer. Press the ALARM 1 SET button to save all settings. If the ALARM 1 SET button is not pressed while the hours, minutes or wake-to choice is flashing, the alarm information will be saved and the clock will display after 5 seconds. 11

13 6. Activate Alarm 1 by pressing the ALARM 1 button on the top of the clock. When the button is up, the alarm is activated and the Alarm 1 time and wake-to choice icon will appear on the display. SETTING and activating ALARM Press and hold the ALARM 2 SET button for 2 seconds. The clock will go into Alarm 2 Set mode. Alarm 2 hour will flash. Use the VOLUME/SET dial to choose the hour. Press the ALARM 2 SET button to save the hour. The minutes will flash. Use the VOLUME/SET dial to choose the minutes. Press the ALARM 2 SET button to save the minutes. The Alarm 2 time is saved. The Wake-to choice icon will flash. Use the VOLUME/SET dial to select your wake-to choice from ipod, Radio or Buzzer. Press the ALARM 2 SET button to save all settings. If the ALARM 2 SET button is not pressed while the hours, minutes or wake-to choice is flashing, the alarm information will be saved and the clock will display after 5 seconds. Activate Alarm 2 by pressing the ALARM 2 button on the top of the clock. When the button is up, the alarm is activated and the Alarm 2 time and wake-to choice icon will appear on the display. note: The alarm sound for both Alarm 1 and Alarm 2 incrementally increases in volume, reaching its loudest setting in 30 seconds. 12

14 Deactivating the alarms When the alarm sounds, press the ALARM 1 or ALARM 2 button into its down position to shut off the alarm. if the alarm wake-to choice is set to buzzer, the buzzer will sound for 20 minutes* if the alarm is not turned off or the SNOOZE button isn t pressed. if the alarm wake-to choice is set to the radio, the radio will play for 60 minutes* if the alarm is not turned off or the SNOOZE button isn t pressed. if the alarm wake-to choice is set to play your ipod/iphone, the ipod/iphone will play for 60 minutes* if the alarm is not turned off or the SNOOZE button isn t pressed. *After sounding for 20 or 60 minutes (depending on Wake-to choice), the alarm will turn off and automatically reset for the following day. Using Snooze When the alarm is sounding, press the SNOOZE button to activate Snooze. The alarm will sound again in 10 minutes. You may repeat this action 6 times. After the 6th snooze, the snooze function cannot be activated. If the alarm is not manually turned off, the alarm buzzer will continue to sound for 20 minutes or the ipod/iphone or radio will continue to play for 60 minutes. The alarm will then turn off and reset for the following day. During a Snooze, the wake-to icon will blink. If the backlight is set to OFF when the alarm sounds or during a snooze, the backlight will automatically illuminate on LOW. 13

15 Using the SLEEP function The Sleep function shuts the audio off automatically within a selected time. The Sleep timer can be set for 60, 45, 30 or 15 minutes To choose a Sleep time or to turn the Sleep function OFF, press the SLEEP button to scroll through your choices of 60, 45, 30, 15 minutes and OFF. Release the SLEEP button when your choice appears on the display. While in Sleep mode, press the SLEEP button once and the remaining sleep time will appear on the display for 3 seconds. Note: When using a secondary audio device with the AUX mode, the Sleep function will turn off the clock s audio but it will not turn off the secondary audio device. Power Press the power button to turn the unit on. The last mode used will activate. Press the power button to turn the unit off. Listening to the radio FM antenna Connect the FM pigtail antenna (included) to the FM antenna socket on the back of the main unit. While in FM mode, tune in an FM station and extend the FM pigtail antenna to find the best position for reception. 14

16 AM loop antenna Connect the AM loop antenna (included) to the AM antenna socket on the back of the main unit. While in AM mode, tune in an AM station and position the AM antenna for the best reception. Listening to the RADIO Press the RADIO button. The display shows the last station chosen. After 5 seconds, the display returns to the current time. To choose a radio band, press the RADIO button to toggle between AM and FM. To choose a radio station on either the AM or FM bands, press the FORWARD or BACK buttons to scroll through station choices. If you press and hold the FORWARD or BACK buttons, the unit will automatically go into search mode and will stop on the next available station with the strongest signal. Preset stations Tune to your preferred radio station using the forward and back buttons. To save your selection, press and hold the preset 1, 2 or 3 button until a beep sounds. Your station is saved. To recall a preset station, press the preset button while in Radio mode. Connecting your ipod/iphone Select the correct ipod/iphone DOCK ADAPTER from the list on page 16, or use the one that came with your ipod/iphone, and snap it securely into the docking area on the top of the unit. 15

17 ipod/iphone DOCK ADAPTERS included are as follows: Insert 10: ipod classic (160 GB [2009]) Insert 12: iphone Insert 14: ipod touch (1st generation) Insert 15: iphone 3G/iPhone 3GS Insert 16: ipod touch (2nd generation) Insert 17: ipod nano (4th generation) Insert 18: ipod nano (5th generation) Plug your ipod/iphone into the dock. ipod/iphone auto play You can choose for your ipod or iphone to start playing automatically or go directly into sleep mode when it is docked. Press and hold the ipod button until the display shows the ipod icon and the Auto icon. Press the ipod button once to deactivate Auto Play (AUTO is not circled see chart below). Press the ipod button again to activate Auto Play (AUTO is circled see chart below). After 3 seconds, the display will return to the clock and your auto play setting will be saved. AUTO AUTO 16

18 PLAYING AND PAUSING ipod/iphone MUSIC Press the ipod PLAY/PAUSE button to pause playback. Press the ipod PLAY/PAUSE button again to resume playback. FAST-FORWARDING AND REWINDING SONGS Press and hold the FORWARD or BACK button to rewind or fast-forward within a song. SKIPPING forward and backward to A SONG Press and release the FORWARD or BACK button incrementally to skip forward or backward to a song. ADJUSTING THE VOLUME Turn the VOLUME dial to adjust volume from 0 to 40. Listening to an external source Connect one end of a 3.5mm to 3.5mm cable (included) to your portable audio player s line-out or headphone jack and the other end to the AUX IN jack on the back of the unit. Press the AUX button to select AUX mode. AUX will display for 5 seconds. 3. Adjust the volume using the VOLUME buttons of the unit and the audio player. Note: The function buttons on the unit will not control an audio player that is connected by the AUX IN input. Using AUX Out Use the AUX OUT jack to connect your audio to additional sources. 17

19 Specifications Power Supply AC 100V~240V, 50/60Hz (Input) DC7.5V/2A (Output) Battery DC 3V 1 pc (Size: CR-2032) for back-up Receiving Bands AM/FM Tuning Range AM KHz FM MHz Loudspeaker hm Speaker Weight (approximate) lbs 36oz. Dimensions (approximate) W x 6.25 D x 3.75 ipod/iphone not included. ipod and iphone are trademarks of Apple Inc., registered in the U.S. and other countries. Made for ipod and Made for iphone mean that an electronic accessory has been designed to connect specifically to ipod or iphone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. 18

20 Troubleshooting Issue Cannot insert the ipod/iphone. ipod/iphone not functioning correctly. No power. Radio reception is poor. Solution Confirm that you are using the correct dock adapter for your ipod/iphone. Remove dust, lint or particles from the 30-pin connector and the ipod/iphone s jack, and insert the ipod/iphone again. Remove the ipod/iphone from the dock, wait a few seconds, and insert it again. Your ipod/iphone software may not be up to date. Connect your ipod/iphone to your computer and open itunes. Check for and download any updates as required. Check the connection to the AC power supply. Check and make sure the AC source is not an outlet powered by a wall switch. If it is, ensure the switch is turned on. Tune in to the station properly. Rotate the FM or AM antenna for better reception. 19

21 Troubleshooting Issue Preset number does not change on the display when Preset button is pressed. Solution When two or more presets are saved to the same station, the lowest preset number will appear on the display. Refer to page 15 to save a new station to a preset number. I hear no sound, or distorted sound, when using an audio player with the AUX IN input. The unit did not remember the correct time after power was disconnected and reconnected. You must adjust the volume of the external source or you may hear no sound from the unit's speakers. Turning the volume of the external audio source up too high may cause the sound from your stereo to be distorted. Reduce the volume of the external source until the distortion stops and then adjust the volume level of the main unit to a comfortable listening level. The back-up battery needs to be replaced. See page 10 for replacing the back-up battery. 20

22 One (1) Year Limited Warranty Brookstone warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser ( Warranty Period ). If a defect arises and a valid claim is received within the Warranty Period, at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product, or 3) provide a store credit in the amount of the purchase price of the original product. A replacement product or part, including a user-installable part installed in accordance with instructions provided by Brookstone, assumes the remaining warranty of the original product. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Brookstone s property. When a store credit is given, the original product must be returned to Brookstone and becomes Brookstone s property. Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty Service at Please be prepared to describe the product that needs service and the nature of the problem. A purchase receipt is required. All repairs and replacements must be authorized in advance. Service options, parts availability and response times will vary. You are responsible for delivery and the cost of delivery of the product or any parts to the authorized service center for replacement, per our instructions. Limits and Exclusions: Coverage under this Limited Warranty is limited to the United States of America, including the District of Columbia and the U.S. Territories of Guam, Puerto Rico, and the U.S. Virgin Islands.This Limited Warranty applies only to products manufactured for Brookstone that can be identified by the Brookstone trademark, trade name, or logo affixed to them or their packaging. The Limited Warranty does not apply to any non-brookstone products. Manufacturers or suppliers other than Brookstone may provide their own warranties to the purchaser, 21

23 but Brookstone, in so far as permitted by law, provides these products as is. This warranty does not apply to: a) damage caused by failure to follow instructions relating to product s use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage caused by service performed by anyone who is not a representative of Brookstone; d) accessories used in conjunction with a covered product; e) a product or part that has been modified to alter functionality or capability; f) items intended to be periodically replaced by the purchaser during the normal life of the product including, without limitation, batteries or light bulbs; g) any product sold as is including, without limitation, floor demonstration models and refurbished items; or h) a product that is used commercially or for a commercial purpose. brookstone SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY. Some states disallow the exclusion or limitation of incidental or consequential damages or how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. 22

24 Merrimack, New Hampshire USA

Portable Speaker Dock. For ipad (3rd generation), ipad 2 and ipad Tablets

Portable Speaker Dock. For ipad (3rd generation), ipad 2 and ipad Tablets Portable Speaker Dock For ipad (3rd generation), ipad 2 and ipad Tablets Table of contents Warnings and Cautions...................................................... 2 FCC Information............................................................