KDC-X993 KDC-HD942U KDC-X693 KDC-MP642U INSTRUCTION MANUAL

Transcription

1 CD-RECEIVER KDC-X993 KDC-HD942U KDC-X693 KDC-MP642U INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U Serial number US Residence Only Register Online Register your Kenwood product at B /00 (KW)

2 Contents Before use 3 Basic Operation 4 Hands-free phoning Function Control 6 Display Settings 10 Display Type Selection Text Display Selection Illumination Color Selection Auxiliary Input Display Setting Music disc/audio file Operation 13 Music Search Music Search for ipod Searching for Music by Initial All Random ipod Control by Hand Mode Direct Music Search Direct Disc Search Basic Operation of Disc Changer (Optional) Tuner Operation 16 Auto Memory Entry Station Preset Memory Preset Tuning Direct Access Tuning PTY (Program Type) Program Type Preset Registration of a Station as a PTY HD Radio tuner control 18 Auto Memory Entry Station Preset Memory Preset Tuning Direct Access Tuning HD Radio Tagging (itunes Tagging) Operation of hands-free phoning 20 Before Use Receiving a call During a call Call waiting Other functions Making a call Dial a number Speed dialing (Preset dial) Calling a number in the Phone Book Calling a number in the call log Make a voice dialing call Registering to the Preset Dial Number List Display of phone number type (category) Bluetooth Audio Operation 24 Before Use Basic Operation Other Functions 25 Activating Security Code Deactivating Security Code Manual Clock Adjustment Date Adjustment Date Format Selection AMP Control Demonstration mode setting Theft Deterrent Faceplate Audio Adjustments 28 Audio Control Audio Setup Sound Setup 29 Cabin selection Speaker setting DTA (Digital Time Alignment) setting X Over setting Preset Equalizer curve select Manual Equalizer Control Preset position selection Manual position setting Audio Preset Memory Audio Preset Recall Favorite Control 34 Favorite Preset Memory Favorite Preset Recall Favorite Preset Memory Delete Favorite Name Setting Bluetooth Setup 36 Registering Bluetooth device Registering Special Bluetooth device Registering PIN Code Downloading the Phone Book Selecting the Bluetooth device You Wish to Connect Deleting a Registered Bluetooth device Displaying the Firmware Version Adding a voice dialing command Setting a Voice Command for Category SMS (Short Message Service) Downloading the SMS Satellite Radio tuner (Optional Accessory) control 41 Basic Operation Category and Channel Search Preset Memory Preset Tuning Channel Scan Direct Access Tuning Basic Operations of remote control 43 Appendix 45 Accessories/ Installation Procedure 50 Connecting Wires to Terminals 51 Installation/Removing the Unit 52 Troubleshooting Guide 54 Specifications 57 2 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

3 Before use 2WARNING To prevent injury or fire, take the following precautions: To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Do not use this unit before canceling Demonstration mode! This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the <Demonstration mode setting> (page 27). How to reset your unit If this unit or the connected unit (disc auto changer, etc.) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Reset button Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth. Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth. Lens Fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. If you experience problems during installation, consult your Kenwood dealer. When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. Characters that conform to ISO can be displayed. The RDS feature won t work where the service is not supported by any broadcasting station. In this document, the description indicator will light means a status is displayed. Refer to <Display Type Selection> (page 10) for the details of the status display. The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable. Handling CDs Do not touch the recording surface of the CD. Do not stick tape etc. on the CD, or use a CD with tape stuck on it. Do not use disc type accessories. Clean from the center of the disc and move outward. When removing CDs from this unit, pull them out horizontally. If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc. CDs that cannot be used CDs that are not round cannot be used. CDs with coloring on the recording surface or CDs that are dirty cannot be used. This unit can only play the CDs with. This unit may not correctly play discs which do not have the mark. You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CD- RW recorder instruction manual.) English 3

4 Basic Operation Release [ ] [SRC] Microphone AUX Auxiliary input [ ] [AUTO] [AUD] [FNC] Control knob USB Terminal General functions Power/Source Select button: [SRC] Turns on the power. When the power is ON, select a source. SRC Select mode 1: Press the [SRC] button and then turn the Control knob or push it toward up or down. To determine the selected source, press the Control knob. SRC Select mode 2: Pressing this button each time switches between sources. Tuner ( TUNER or HD Radio ), USB or ipod ( USB or ipod ), CD ( CD ), Auxiliary input ( AUX ), and Standby ( STANDBY ) Press at least 1 second to turn off the power. The SRC Select mode can be set in MENU > SRC Select of Auxiliary input source is initially set to OFF. Set Built in AUX described in <Function Control> (page 6) to ON. : Select MENU > Built in AUX When an optional accessory is connected, the source name for each device appears. When connection of the ipod is recognized, the source display changes from USB to ipod. USB (ipod) source is recognized as CD source on the connected unit. Volume control: [AUD] knob Turn the knob to adjust the volume. Subwoofer output: Control knob Switches between ON ( SUBWOOFER ON ) and OFF ( SUBWOOFER OFF ) each time pushing toward down for at least 2 seconds. Auxiliary input Connect a portable audio device with mini-plug cable (3.5 ø). Use the mini-plug cable which is stereo type and does not have any resistance. The auxiliary input requires the setting made in MENU > AUX of Text/Title scroll: Control knob Scrolls the CD and audio file text display when pushing toward up for at least 2 seconds. Muting volume upon reception of phone call When there is a call, CALL is displayed and the audio system is paused. When the call ends, CALL disappears and the audio system comes back on. The audio system comes back on when [SRC] is pressed during a call. To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 51). Function Control : [FNC] Pressing this button allows you to set various functions using the Control knob. Refer to <Function Control> (page 6). Category Function of setup item MENU Allows you to set up the environment. SETUP Allows you to set up the display and color. SOUND Allows you to set up the sound environment. BT Allows you to set up the Bluetooth function. Allows you to set up the each source function. 4 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

5 Favorite Control : Control knob You can recall the various registered functions by turning the Control knob. For example, you can recall and playback the playlist in ipod while listening to Tuner. Refer to <Favorite Control> (page 34). Tuner functions FM band: Control knob Switches between FM1, FM2, and FM3 each time pushing toward up. AM band: Control knob Switches to AM when pushing toward down. Tuning: Control knob Changes the frequency when pushing toward left or right. During reception of stereo stations the ST indicator is ON. Tuning mode select: [AUTO] For KDC-HD942U/ KDC-X693/ KDC-MP642U: Switches as follows each time this button is pressed. For KDC-X993: Switches as follows each time this button is pressed for at least 1 second. Tuning mode Display Operation Auto seek Seek Mode : Auto1 Automatic search for a station. Preset station seek Seek Mode : Auto2 Search in order of the stations in the Preset memory. Manual Seek Mode : Manual Normal manual tuning control. Disc & Audio file play functions Drop open the faceplate: Release Push the faceplate on the left side, and return it to its former position. Disc play: Disc slot Starts playing when a disc is inserted. When a CD is inserted, the CD-IN indicator is ON. Disc ejection: [0] You can eject the disc for 10 minutes after switching off the engine. USB device/ipod play: USB Terminal Connecting a USB device starts playback. For the playable audio file, media, and devices, refer to <About Audio file> (page 45). Pause and play: Control knob Switches between pause and play each time this button is pressed. USB device removing: [0] Press this button for 2 seconds or longer to select the remove mode, and the remove the USB device. During the remove mode, USB REMOVE is displayed. Music search: Control knob Changes the music when pushing toward left or right. Fast reverses or forwards the music while keeping pushing toward left or right. (No sound is output while playing audio file.) Folder search: Control knob Changes the folder containing the audio file when pushing toward up or down. For the operation on ipod, enter <Music Search for ipod> (page 13) is first to enter the search mode. Search mode: [ ] After pressing [ ] button, you can quickly search songs with the Control knob. See <Music Search> (page 13) for details. Hands-free phoning Microphone: (Accessory of KDC-X993) The microphone for the hands free phone is supplied. When your voice cannot be recognized due to the low microphone volume or noises in the vehicle, adjust the microphone settings by selecting MENU > Mic Gain of <Function Control> and MENU > NR Level of 3 inch CD cannot be used. Attempt to insert using an adapter can cause malfunction. English 5

6 Function Control Functions in the table below can be set up by using Function Control. 1 Enter Function Control mode 2 Select a Function group. Push the Control knob towards right or left. Pushing the Control knob towards left allows you to set the preference items ( MENU, SETUP, or SOUND ). Pushing the Control knob towards right allows you to set the currently selected source function item ON/OFF. 3 Select your desired setup item Operation type Operation Movement between items Selection of item Return to previous item Select Return at the bottom of the item list. Repeat selection and determination until your desired setup item is selected. Example: In this manual, the above selection is indicated as Select MENU > DEMO Mode. Each item s & will be when the source function is set to ON. 4 Make a setting Push the Control knob towards up or down. Press the Control knob to set the source function item ON/OFF. Some items require you to keep pressing the Control knob for 1 or 2 seconds so that you can make a setting. For these items, the time during which you need to keep pressing the Control knob is displayed in the Entry column in seconds. For the functions accompanied by the description of the setting procedure and so forth, the reference page numbers are displayed. 5 Exit Function Control mode Press the [FNC] button for at least 1 second. Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed. : Can be set in other than standby state. : Can be set in standby state. : Can be set while Audio file source of CD/USB/iPod. : Can be set while Audio file source of CD/USB (excluding ipod). : Can be set while CD/ Disc changer source. : Can be set while CD source. : Can be set while Disc changer source. : Can be set during Tuner source. : Can be set during FM reception. : Can be set while accessing AUX source. : Can be set while HD Radio source. : Can be set during Satellite radio source. : Can be set only during playback of the ipod source. : Can be set for sources other than the standby source by setting 2 ZONE of <Audio Setup> (page 28) to ON. : Can be set while a cell-phone is connected. : Sets ILM MSC SYNC in the menu to OFF. : Refer to the reference page. : Can be set during all sources. The Control knob is used for entry, but how to use the knob varies depending on the setting items. : Press the Control knob to switch the settings. : Push the Control knob towards left or right to switch the settings. : Turn the Control knob to switch the settings. 1 sec. : Press the Control knob for 1 second to enter into the setting mode. 2 sec. : Press the Control knob for 2 seconds to enter into the setting mode. Refer to the respective page for information on how to set the items with reference page number. Only the items available to the current source are displayed. The SOUND setting cannot be performed while the Dual Zone function is used. *Factory setting *1 Function of KDC-X993. *2 Function of KDC-X693. *3 Function of KDC-X693 with KCA-BT200. *4 Function of KDC-MP642U. *5 Refer to <Menu Glossary> (page 48). 6 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

7 Source function item Function Setting Entry Setting overview Condition Page ipod BY HAND ON / OFF * When set to ON, allows you to operate ipod with the 14 control on the ipod. FILE SCAN ON / OFF * When set to ON, plays the intro of the music in the folder successively. FOLDER RDM ON / OFF * When set to ON, plays the music in the folder randomly. ALL RANDOM ON / OFF * When set to ON, all songs in ipod are played at 14 random. FILE REPEAT ON / OFF * When set to ON, plays the music repeatedly. FOLDER REP ON / OFF * When set to ON, plays the music in the folder repeatedly. TRACK SCAN ON / OFF * When set to ON, plays the intro of the music on the disc successively. DISC RANDOM ON / OFF * When set to ON, plays the music on the disc randomly. MAGAZINE RDM ON / OFF * When set to ON, plays the music in the disc changer randomly. TRACK REPEAT ON / OFF * When set to ON, plays the music repeatedly. DISC REPEAT ON / OFF * When set to ON, plays the music on the disc repeatedly. PTY SEARCH Select the Program Type and search for a station. 17 AUTO MEMORY Memorizes 6 stations with good reception 16 automatically. Channel Scan Every receivable Channel is checked for 10 seconds. 42 Preference item Category Item Setting Entry Setting overview Condition Page MENU Security Set / Sets/Resets security code sec. Security Clear SRC Select 1 */ 2 Sets the source selection method. 4 Skip Search 0.5% */ 1% / 5% / 10% Sets the ratio of skip performed with <Music Search for ipod>. Device Regist *1 1 sec. Register a Bluetooth device (pairing). 36 SPCL DVC Select *1 Allow registration of a special device that cannot be 36 1 sec. registered normally. Phone Selection *1 1 sec. Select a cell-phone subject to hands-free connection. 37 Audio Selection *1 1 sec. Select the Bluetooth audio player to be connected. 37 Device Delete *1 1 sec. Cancel registration of the Bluetooth device. 38 BT DVC Status *1 1 sec. Display the status of the Bluetooth device. *5 PIN Code Edit *1 Specify the PIN code required when registering this unit 36 1 sec. using the Bluetooth device. Auto Answer *1 OFF / 0S Answer a call automatically after lapse of the preset *5 8S * 99S time interval for automatic answer. Mic Gain *1 2 0 * Adjusts the sensitivity of the built-in microphone for a *5 +2 telephone call. NR Level *1 2 0 * +2 Reduces the noises generated by the surrounding environment without changing the microphone volume. *5 13 Next page 3 English 7

8 Function Control Category Item Setting Entry Setting overview Condition Page SP Select *1 Front */ Specify the voice output speaker. *5 F-R / F-L Call Beep *1 ON */ OFF Output a beep from the speaker when a call comes in. *5 BT F/W Update *1 1 sec. Display the firmware version and update the firmware. 38 Beep OFF / ON * Setting the operation check sound (beep sound) ON/ OFF. Clock Adjust 1 sec. Sets the clock. 26 Date Adjust 1 sec. Sets the date. 26 Date Mode 7 types 1 sec. Sets the date display mode. 26 SYNC OFF */ ON Synchronizing the RDS station time data and this unit s clock. DSI OFF / ON * DSI (Disabled System Indicator) of the unit blinks when the faceplate is removed. Illumi DIM OFF / AUTO * Sets whether the illumination is dimmed in conjunction *5 / MNAL1 / MNAL2 with the light switch of the vehicle or it is dimmed constantly. ILM Effect *1*3 OFF / ON * Sets whether the key illumination color (KDC-X993/ KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U) is changed in conjunction with the key operation. ILM MSC SYNC OFF */ ON Sets whether the key illumination color (KDC-X993/ KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U) is changed in conjunction with the sound volume. Display OFF / ON * Turns off the display when no operation is performed. *5 DISP DIM OFF / AUTO * / MNAL1 / MNAL2 Dims the display part in conjunction with the light switch of the vehicle. Contrast 1-10 Adjusting the display contrast. DISP N/P POSI1 / 2 Switches the panel display between positive or *5 / NEGA1 / 2 negative. AMP OFF / ON * Turns on/off the built-in amplifier. *5 Zone2 REAR */ Specifies the destination of AUX input sound when the *5 FRONT Dual Zone function is turned on. AMS Control *1*2 Controls the connected LX amplifier. 26 TI *1*2 OFF */ ON Switches to the traffic information automatically when the traffic bulletin starts. CRSC *1*2*4 OFF / ON * Switches to Monaural to decrease noise when reception is poor. Receive Mode AUTO */ Sets the receive mode of HD Radio. *5 DIGITAL / 1 sec. ANALOG Tag Memory Displays the tag memory usage of HD Radio. Up to tags can be registered to this unit. Tagging 0FF / ON * Turns ON / OFF the tag memory function of HD Radio. 19 ESN= Displays the Electronic Serial Number of satellite radio. Name Set 1 sec. Sets the display when switched to AUX source. 12 Scroll Auto */ Manual Specifies whether the text is scrolled automatically. Favorite Delete 1 sec. Deletes Favorite Preset Memory. 34 Built in AUX OFF */ ON Sets whether to display AUX during source selection. CD Read 1 */ 2 Sets the CD read mode. *5 DEMO Mode OFF / ON * 2 sec. Specifies whether to enable demonstration. 27 *5 8 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

9 Category Item Setting Entry Setting overview Condition Page SETUP Display Type Select DISP TYPE Sets the display pattern. 10 Select [A] [D] Graphic Select Graphic 1 2 Sets the Type C spectrum analyzer display. Side Select 3 types Sets the Type A side display. Text Select Sets the Type A/B/C text display. 10 Status Appear/ Sets the Type A Status display. 10 Disappear Color All Variable Scan * Sets the panel and display illumination color. 12 Select *1*2 Display / Color 1 Color 10 / Sets the display illumination color. User Right Sets the right side of panel illumination color. Left Sets the left side of panel illumination color. SOUND Control EQ Sets the sound quality. 31 Bass Boost OFF */ Step1 2 Sets the Bass Boost level in two steps. HIGHWAY- SOUND OFF / STEP1 / 2 / 3 * Compensates the low volume or bass sound being lost by road noises to make vocal sound clearer. Supreme+ ON */ OFF Turns ON/OFF the Supreme plus function. *5 *5 BT Position Compensates the sound environment in accordance 32 with the listening position. Setup Cabin Compact etc. Selects the car type to compensate the distance 29 difference between each speaker. Speaker Sets the connected speaker, speaker size, and 29 installation position. DTA Makes fine adjustment of the compensation value 30 specified at Cabin. X Over Makes fine adjustment of the X Over value specified at 30 Speaker. Preset Recall Registering the value setup by Sound Control. Recalling 33 the sound setup registered by <Audio Preset Memory>. Memory Registering the value setup by Sound Control. 33 DSP Set Bypass / Through * Setting Bypass passes the DSP function. Setting Through activates the DSP function. Voice Calls by recognizing the registered voice. 23 Recognize Voice Tag PB Name Edit Registers voice for voice recognition. 38 SMS PN Type Edit Registers voice to select the Phone number category in Phonebook. 39 SMS Download a short message. 40 Download SMS Inbox Display the received short message. 40 Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF. The connected cell-phone must have the SMS function to use the SMS function. Location played with FILE SCAN - Audio file: First 10 seconds - Music Editor media: First 10 seconds or the part picked by Intro Skip. During Intro Skip, turn the control knob left or right to change the song. The scan method depends on the Music Editor setting. See the Music Editor help for details. English 9

10 Display Settings Display Type Selection Shown below are examples of display types. Display TYPE [A] TYPE [B] TYPE [C] TYPE [D] Display Type Displays 4 to 5 lines of text. Displays a line of text and video. Displays a line of text and the spectrum analyzer. Displays the clock. 1 Enter Display type selection mode Select SETUP > Display Select > Type Select. For how to select Function Control item, refer to 2 Select the Display type 3 Exit Display type selection mode For how to switch the text display information, refer to <Text Display Selection> (page 10). When TYPE [A] is selected, the status (ON/OFF indicator of each function) can be displayed on the first line, and the icon of the currently selected source and the text information title can be displayed on the left side by the following <Function Control> (page 6) operation. Status display: Select SETUP > Display Select > Status Side display: Select SETUP > Display Select > Side Select When TYPE [C] is selected, the spectrum analyzer can be switched by the following <Function Control> (page 6) operation. : Select SETUP > Display Select > Graphic Select Text Display Selection Changes displayed information on each source following; In Tuner source for KDC-X993/ KDC-X693 Information Display Frequency & Program Service name (FM) Frequency/PS Title & Artist name* (FM) Title/Artist Station name* (FM) Station Name Radio text plus* (FM) Radio Text Plus Radio text (FM)* Radio Text Spectrum analyzer & Clock ( TYPE [A]/[B] ) or Clock ( TYPE [C] ) Speana/Clock or Clock Date Date Blank Blank * Information of Radio text plus is displayed. In HD Radio source for KDC-HD942U or KDC-X993/ KDC-X693/ KDC-MP642U with KTC-HR300 Information Display Frequency Frequency Station name Station Name Title & Artist name Title/Artist Album & Artist name Album/Artist Genre Genre Spectrum analyzer & Clock ( TYPE [A]/[B] ) or Clock ( TYPE [C] ) Speana/Clock or Clock Date Date Blank Blank In Tuner source for KDC-MP642U Information Display Frequency Frequency Spectrum analyzer & Clock ( TYPE [A]/[B] ) or Clock ( TYPE [C] ) Speana/Clock or Clock Date Date Blank Blank In CD & External disc source Information Disc title Track title Play time Spectrum analyzer & Clock ( TYPE [A]/[B] ) or Clock ( TYPE [C] ) Date Blank Display Disc title Track title P-Time Speana/Clock or Clock Date Blank 10 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

11 In Audio file/ ipod source Information Title & Artist name Album & Artist name Folder name File name Play time Play time bar (ipod only)* Spectrum analyzer & Clock ( TYPE [A]/[B] ) or Clock ( TYPE [C] ) Date Blank Display Title/Artist Album/Artist Folder name File name P-Time Time Bar Speana/Clock or Clock Date Blank * Can be displayed only on the bottom line of TYPE [A] text. In Standby/ Auxiliary input source Information Display Source name Source Name Clock Clock Date Date Blank Blank In SIRIUS/ SAT source (Optional) Information Display Channel Name Channel Name Music Title Song Title Artist Name Artist Name Composer name Composer name Category Name Category Name Label Name Label Name Comment Comment Channel Number Channel Number Spectrum analyzer & Clock ( TYPE [A]/[B] ) or Clock ( TYPE [C] ) Speana/Clock or Clock Date Date Blank Blank 1 Enter Text display selection mode Select SETUP > Display Select > Text Select. For how to select Function Control item, refer to 2 Select the text display part Push the Control knob towards up or down. The selected text display part blinks. 3 Select the text 4 Exit Text display selection mode If the selected display item does not have any information, alternative information is displayed. When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed. (Function of KDC-X993/ KDC-X693) Some items cannot be selected depending on the display type and row. When selecting Folder name while playing with ipod, names will be displayed depending on currently selected browsing items. If the ipod Control by Hand Mode is set to on while playing the ipod, ipod by Hand Mode is displayed. If all characters cannot be displayed while playing with ipod, the file number in the list is displayed. Information Display Music title TITLE*** Folder name FLD*** File name FILE*** In XM source (Optional) Information Channel Name Title Name Category Name Channel Number Spectrum analyzer & Clock ( TYPE [A]/[B] ) or Clock ( TYPE [C] ) Date Blank Display CHANNEL NAME TITLE NAME CATEGORY NAME CHANNEL NUMBER Speana/Clock or Clock Date Blank English 11

12 Display Settings Function of KDC-X993/ KDC-X693 Illumination Color Selection Selecting the Illumination Color of the panel. 1 Enter Illumination color selection mode Select SETUP > Color Select. For how to select Function Control item, refer to 2 Select the place where you want to set the Illumination Color Place Display All All Display Display Right Right Left Left Turn the Control knob and push the center when the desired item is displayed. 3 Select the Illumination Color Turn the Control knob and push the center when the desired item is displayed. Select the color from Variable Scan / Color1 Color 10 / User. Creating User color You can create your original color during the selection from Color1 Color10. The color you created can be called when you select User. 1. Press the Control knob for at least 1 second. Enter the detail color adjustment mode. 2. Set the color. Operation type Operation To select the color to adjust. Push the Control knob towards right (red, green, or blue) To adjust color. (Range: 0 9) or left. Turn the Control knob or push it towards up or down. 3. Exit the detail color adjustment mode. 4 Exit Illumination color selection mode Auxiliary Input Display Setting Selects the display when changing to Auxiliary input source. 1 Select the AUX source Press the [SRC] button. 2 Enter Auxiliary input display setting mode Select MENU > Name Set. For how to select Function Control item, refer to 3 Enter Auxiliary input display setting mode Press the Control knob for at least 1 second. The presently selected Auxiliary input display is displayed. 4 Select the Auxiliary input display AUX / DVD / PORTABLE / GAME / VIDEO / TV 5 Exit Auxiliary input display setting mode When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes. The Auxiliary input display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. On the KCA-S220A, AUX EXT is displayed by default. AUX source is initially set to OFF. Before display setting, set Built in AUX described in <Function Control> (page 6) to ON. : Select MENU > Built in AUX 12 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

13 Music disc/audio file Operation Function of Audio file/ Internal CD source Music Search Selecting the music you want to listen to from the device or media being played now. 1 Enter Music Search mode SEARCH is displayed. Displays the current Audio file name. 2 Search for music Audio file Operation type Operation Movement between Turn the Control knob or push it towards folders/files up or down. Selection of folder/file Press the Control knob or push it towards right. Return to previous folder Push the Control knob towards left. Return to root folder Push the Control knob towards left for at least 1 second. 8 or 7 beside the displayed folder name indicates that this folder is preceded or followed by another folder. File name is displayed with indicator. Internal CD source Operation type Movement between track Selection of track Return to first track Operation Turn the Control knob or push it towards up or down. Push the Control knob towards left for at least 1 second. Cancelling the Music Search mode Music Search cannot be performed during Random play. Function of ipod Music Search for ipod Search for the song (in ipod) you want to play. 1 Enter Music Search mode 2 Search for music Operation type Operation Movement between items Skip Search * 1 Push the Control knob towards right or left. Selection of item Return to previous item Push the Control knob towards up. Return to Top menu Push the Control knob towards up for at least 1 second. Search by initial Push the Control knob towards down. Refer to the next section <Searching for Music by Initial>. Scroll bar is displayed on the right side of the screen. Cancelling the Music Search mode * 1 Skip Search: The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected now. Set the ratio with Skip Search in Keep pushing Control knob for 3 seconds or longer skips songs at 10% irrespective of the setting. Characters that are included in a song name but cannot be displayed are left blank. If no character included in a song name cannot be displayed, the browse item name and digits are displayed. Items Display Items Display Playlists PLIST*** Podcasts PDCT*** Artists ART*** Genres GEN*** Albums ALB*** Composers COM*** Songs PRGM*** English 13

14 Music disc/audio file Operation Function of ipod Searching for Music by Initial You can select an alphabetic character from the list in the browse item (artist, album, etc.) selected now. 1 Enter Music Search mode 2 Start the alphabet search Push the Control knob towards down. A B C is displayed. If you can not search for a song by an alphabetic character in the browse item selected now, the data on the screen does not change. 3 Select the initial to be searched for Operation type Operation Move to the next character. Turn the Control knob or push it towards right or left. Move to the next row. Push the Control knob towards up or down. 4 Determine the selected initial Start search. When search is completed, the music search mode is selected again at the selected character position. Cancelling the alphabet search The time of search by alphabet may become long depending on the number of songs in ipod or the folder structure. When selecting an initial in the alphabet search, entering * searches symbols and entering 1 searches digits. If the first character string begins with an article a, an, or the in the alphabet search mode, it is searched for in defiance of the article. Function of ipod All Random All songs in ipod are played at random. Enter All random mode Select ALL RANDOM. For how to select Function Control items, refer to The time required to turn on the all random function may become longer depending on the number of songs in ipod or the folder structure. Turning on the all random function changes the ipod browse item to Songs. This browse item will not change even if the all random function is turned off. Function of ipod ipod Control by Hand Mode Allows you to operate ipod with the control on the ipod. Enter ipod Control by Hand Mode Select ipod BY HAND. For how to select Function Control items, refer to ipod will be paused when Hand mode is turned ON during playback. In the ipod Control by hand mode, ipod cannot be operated using this unit. This mode is not compatible with music information display. The display will show ipod by Hand Mode. ipod can be operated when it conforms to the ipod control function. 14 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

15 Function of remote control Direct Music Search Searchs the music by entering the track number. 1 Enter the music number Press the number buttons on the remote control. 2 Search the music Press the [4] or [ ] button. Cancelling Direct Music Search Press the [38] button. Direct Music Search cannot be performed during playing of ipod, Music Editor media, Random play, or scan play. Basic Operation of Disc Changer (Optional) Selecting CD changer source Press the [SRC] button. Select the CD CHANGER display. Music search Push the Control knob towards right or left. Disc Search Push the Control knob towards up or down. Function of disc changers with remote control Direct Disc Search Searchs the disc by entering the disc number. 1 Enter the disc number Press the number buttons on the remote control. 2 Search the disc Press the [FM+] or [AM ] button. Cancelling Direct Disc Search Press the [38] button. Direct Disc Search cannot be performed during playing of Random play or scan play. Input 0 to select disc 10. English 15

16 Function of KDC-X993/ KDC-X693/ KDC-MP642U Tuner Operation Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Enter Auto Memory Entry mode Select AUTO MEMORY. For how to select Function Control items, refer to 2 Open Auto Memory Entry Turn the Control knob to select YES, and then press the Control knob. When 6 stations that can be received are put in the memory, auto memory entry closes. Station Preset Memory Putting a station in the memory. 1 Select the frequency to put in the memory Push the Control knob towards right or left. 2 Enter Preset Memory mode 3 Select the number to put in the memory 4 Determine the number to put in the memory Press the Control knob for at least 2 seconds. Cancelling the Preset Memory mode Preset Tuning Recalling the stations in the memory. 1 Enter Preset Tuning Select mode 2 Select a desired station in the memory 3 Recall the station Cancelling Preset Tuning Function of remote control Direct Access Tuning Entering the frequency and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. is displayed. 2 Enter the frequency Press the number buttons on the remote control. Example: Desired frequency Press button 92.1 MHz (FM) [0], [9], [2], [1] 810 khz (AM) [0], [8], [1], [0] Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. You can enter the FM band frequency in steps of a minimum of 0.1 MHz. 16 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

17 Function of KDC-X993/ KDC-X693 PTY (Program Type) Selecting the Program Type below and searching for a station; Program Type Display Program Type Display Speech Speech Jazz Jazz Music Music Classical Classicl News News R & B R&B Information Inform Soft R & B SoftR&B Sports Sports Language Language Talk Talk Religious Music RelMusc Rock Rock Religious Talk RelTalk Classic Rock ClsRock Personality Persnlty Adult Hits AdltHit Public Public Soft Rock Soft Rck College College Top 40 Top 40 Weather Weather Country Country Oldies Oldies Soft Soft Nostalgia Nostalga Speech and Music include the Program type shown below. Music: Black character item. Speech: White character item. 1 Select PTY mode Select PTY SEARCH. For how to select Function Control items, refer to 2 Select the Program Type 3 Search for the selected Program Type station Push the Control knob towards right or left. 4 Exit PTY mode This function cannot be used during a traffic bulletin or AM reception. When the selected Program Type is not found, No PTY is displayed. Select another Program Type. Function of KDC-X993/ KDC-X693 Program Type Preset Putting the Program Type in the Preset button memory and quick recall. Presetting the Program Type 1 Select the Program Type to preset Refer to <PTY (Program Type)> (page 17). 2 Enter Program Type Preset mode 3 Select the number to put in the memory 4 Determine the number to put in the memory Press the Control knob for at least 1 second. Recalling the preset Program Type 1 Enter PTY mode Refer to <PTY (Program Type)> (page 17). 2 Enter Program Type Preset mode 3 Select a desired Program Type in the memory 4 Recall the Program Type Function of KDC-X993/ KDC-X693 Registration of a Station as a PTY Registering a Program Type for stations with no PTY data. 1 Receive the station you want to register 2 Select the Program Type to register Refer to <PTY (Program Type)> (page 17). 3 Register the Program Type Press the [FNC] button for at least 2 seconds. Confirming the Program Type The Program Type is displayed for 3 seconds. 4 Exit PTY mode English 17

18 Function of KDC-HD942U KDC-X993/ KDC-X693/ KDC-MP642U with KTC-HR300 (Optional Accessory) HD Radio tuner control Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Enter Auto Memory Entry mode Select AUTO MEMORY. For how to select Function Control items, refer to 2 Open Auto Memory Entry Turn the Control knob to select YES, and then press the Control knob. When 6 stations that can be received are put in the memory, auto memory entry closes. Preset Tuning Recalling the stations in the memory. 1 Enter Preset Tuning Select mode 2 Select a desired station in the memory 3 Recall the station Cancelling Preset Tuning Station Preset Memory Putting a station in the memory. 1 Select the frequency to put in the memory Push the Control knob towards right or left. 2 Enter Preset Memory mode 3 Select the number to put in the memory 4 Determine the number to put in the memory Press the Control knob for at least 2 seconds. Cancelling the Preset Memory mode 18 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

19 Function of remote control Direct Access Tuning Entering the frequency and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. is displayed. 2 Select Tuning item Press the [DIRECT] button on the remote control. Pressing the [DIRECT] button each time switches the following tuning items as follows. Tuning item Display Frequency Channel CH Cancelling Direct Access Tuning 3 Enter the frequency or Channel Press the number buttons on the remote control. Example of frequency input: Desired frequency Press button 92.1 MHz (FM) [9], [2], [1] 810 khz (AM) [8], [1], [0] HD Radio Tagging (itunes Tagging) Using an itunes Tagging enabled HD Radio you can tag your music. When you hear a song you enjoy on your local HD Radio station, you only have to press the Control knob. The song s information will then be saved on this unit. The saved songs will then show up in a playlist called Tagged in itunes the very next time you sync your ipod to your computer. So then you just need to click and then easily buy and download the song you were tagging directly from the Apple itunes Music Store. 1 Enter HD Radio tagging mode TAG will be indicated on the display when song information can be registered. Turn ON the MENU > Tagging of <Function Control> (page 6) when using this function. Up to 50 TAGs (song s information) can be registered to this unit. When ipod is connected, the TAG information registered to this unit is transferred to the connected ipod. The memory usage can be checked by selecting MENU > Tag Memory of 4 Do Direct Access Tuning Press the [4] or [ ] button. You can enter the FM band frequency in steps of a minimum of 0.1 MHz. English 19

20 Function of KDC-X993 KDC-HD942U/ KDC-X693/ KDC-MP642U with KCA-BT200 (Optional Accessory) Operation of hands-free phoning Before Use For details on the Bluetooth cell-phone with the hands-free function, see <About the Cell-Phone> (page 46). You need to register your cell-phone before using it with this unit. For more details, see <Registering Bluetooth device> (page 36). If you have registered two or more cell-phones, you need to select one of them. For more details, see <Selecting the Bluetooth device You Wish to Connect> (page 37). To use the Phone Book, it must be downloaded to this unit in advance. For details, see <Downloading the Phone Book> (page 37). BT indicator is lit when a cell-phone is connected to this unit. Receiving a call Answering a Phone Call Press the [AUD] button. The following operations disconnect the line: - Insert a CD. - Connect a USB device. The name of the calling party is displayed if it has already been registered in the Phone Book. Rejecting an Incoming Call Press the [SRC] button or press the [ for at least 1 second. During a call ] button your cell-phone to return to the hands-free talk mode. Adjusting the Voice Volume during a Call Turn the [AUD] knob. Call waiting Answering Another Incoming Call with the Current Call Suspended 1 Press the [AUD] button. 2 Turn the Control knob or push it towards up or down. Select the ANSWER display. 3 Press the [AUD] button. Answering another Incoming Call after Terminating the Current Call Press the [SRC] button or press the [ ] button for at least 1 second. Continuing the Current Call 1 Press the [AUD] button. 2 Turn the Control knob or push it towards up or down. Select the REJECT display. 3 Press the [AUD] button. Answering the Waiting Call after Terminating the Current Call Press the [SRC] button or press the [ ] button for at least 1 second. Switching between the Current Call and Waiting Call Press the [AUD] button. Each pressing of this knob switches the calling party. Disconnecting a Call Press the [SRC] button or press the [ for at least 1 second. ] button Switching to the Private Mode Switches between Private talk ( PRIVATE ) and Hands-free talk each time this button is pressed. Depending on the type of your cell-phone, switching to the private talk mode may select the source that was used before commencing the hands-free connection. If this happens, the source cannot be switched back to the hands-free talk mode by operating this unit. Operate 20 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U Other functions Clearing the Disconnection Message KDC-X993: KDC-HD942U/ KDC-X693/ KDC-MP642U: Press the [ ] button for at least 1 second. HF Disconnect disappears.

21 Making a call 1 Enter dialing method mode KDC-X993: KDC-HD942U/ KDC-X693/ KDC-MP642U: Press the [ ] button for at least 1 second. 2 Select a dialing method DIAL» INITIAL» PHONE BOOK» OUT-CALL» IN-CALL» MISSED CALLS Methods of operations in the above modes are described below. 3 Exit the dialing method mode Dial a number 1 Enter dialing method mode KDC-X993: KDC-HD942U/ KDC-X693/ KDC-MP642U: Press the [ ] button for at least 1 second. 2 Select the number dial mode Select the DIAL display. 3 Enter a phone number Press the number ([1] [0]), #([FM]), *([AM]), or +([ ]) button on the remote controller. 4 Make a call Press the [DIRECT] button on the remote controller. To erase the entered phone number digit by digit: Press the [4] button on the remote controller. You can input max 32 digits. Speed dialing (Preset dial) 1 Enter dialing method mode KDC-X993: KDC-HD942U/ KDC-X693/ KDC-MP642U: Press the [ ] button for at least 1 second. 2 Select the DIAL, PHONE BOOK, OUT-CALL, IN-CALL, or MISSED CALLS display. 3 Enter preset dial mode 4 Select the number you want to recall from the memory Turn the Control knob or push it towards up or down. 5 Phone number is displayed. 6 Exit the preset dial mode 7 Make a call Press the Control knob for at least 1 second. You need to register the preset dial number. (page 23) English 21

22 Function of KDC-X993 KDC-HD942U/ KDC-X693/ KDC-MP642U with KCA-BT200 (Optional Accessory) Operation of hands-free phoning Calling a number in the Phone Book 1 Enter dialing method mode KDC-X993: KDC-HD942U/ KDC-X693/ KDC-MP642U: Press the [ ] button for at least 1 second. 2 Select the Phone Book mode Select the INITIAL display, proceed to step 3. Select the PHONE BOOK display, proceed to step 4. 3 Select the initial to be searched for Operation type Operation Move to the next character. Turn the Control knob or push it towards right or left. Move to the next row. Push the Control knob towards up or down. Determine the selected initial. 4 Select the name Operation type Move to the next phone number. Move to the next name. Operation Turn the Control knob or push it towards up or down. Push the Control knob towards right or left. Calling a number in the call log 1 Enter dialing method mode 2 Select the call log mode Select the OUT-CALL (outgoing call), IN-CALL (incoming call), or MISSED CALLS (missed call) display. 3 Select a name or phone number Turn the Control knob or push it towards up or down. Switching between Display Modes Pressing this button each time switches between name and telephone number. 4 Make a call Press the Control knob for at least 1 second. The outgoing call list and the incoming call list, and the missed call list are the lists of calls originated from and received at this unit. They are not the ones stored in the cell-phone memory. Switching between Display Modes Pressing this button each time switches between name and telephone number. 5 Make a call Press the Control knob for at least 1 second. During search, a non-accent character such as u is searched for instead of an accent character such as ü. 22 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

23 Make a voice dialing call 1 Enter voice recognize mode Select BT > Voice Recognize. For how to select Function Control item, refer to Ready is displayed. 2 PB Name? is displayed. When a beep is heard, utter the name within 2 second. 3 PN Type is displayed. When a beep is heard, utter the category within 2 second. 4 Make a call Press the Control knob for at least 1 second. This step is the same as step 3 of the procedure in <Calling a number in the Phone Book>. You can make a call or select a category. If your voice cannot be recognized, a message is displayed. Pressing the Control knob allows you to retry voice input. (page 54) Both the name and category requires registration of a voice tag. (page 39) Audio sound is not output during voice recognize. Registering to the Preset Dial Number List 1 Enter the phone number you wish to register Enter the phone number with reference to the following: Dial a number/ Calling a number in the call log/ Calling a number in the Phone Book 2 Enter Preset Memory mode 3 Select the number to put in the memory Turn the Control knob or push it towards up or down. 4 Determine the number to put in the memory Press the Control knob for at least 1 second. Exit the Preset Memory mode Display of phone number type (category) The category items in the Phone Book are displayed as follows: Display Information GENERAL / General HOME / Home OFFICE / Office MOBILE / Mobile OTHER / Other English 23

24 Bluetooth Audio Operation Before Use For details on the Bluetooth Audio player which can be connected, see <About the Bluetooth Audio player> (page 47). You need to register your Bluetooth Audio player before using it with this unit. For more details, see <Registering Bluetooth device> (page 36). You to select the Bluetooth audio player you wish to connect. Refer to <Selecting the Bluetooth device You Wish to Connect> (page 37). Basic Operation Selecting Bluetooth Audio source Press the [SRC] button. Select the BT Audio display. For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4). Pause and play Music Search Push the Control knob towards right or left. All or some of the operations above cannot be performed if the Bluetooth audio player is not ready for remote control. Switching between Bluetooth audio sources does not start or stop playback automatically. Perform the operation for starting or stopping playback. Some audio players cannot be controlled remotely or reconnected after Bluetooth disconnection. Operate the main unit of the audio player to connect Bluetooth. 24 KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

25 Other Functions Activating Security Code You can set the Security Code with a 4 digit number of your choice. The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. 1 Select Security code mode Select MENU > Security Set For how to select Function Control item, refer to 2 Enter Security Code mode Press the Control knob for at least 1 second. When Enter is displayed, [ ][ ][ ][ ] is also displayed. 3 Enter Security Code Operation type Operation Select the digits to enter Push the Control knob towards right Select the Security Code numbers or left. Turn the Control knob or push it towards up or down. 4 Confirm the Security Code Press the Control knob for at least 3 seconds. When Re-Enter is displayed, [ ][ ][ ][ ] is also displayed. 5 Do the step 3 through 4 operation, and reenter the Security Code. Approved is displayed. The Security Code function activates. If you enter the wrong Code in steps 3 through 4, repeat from step 3. 6 Exit Security Code mode Entering Security Code The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed. 1 Turn the power ON. 2 Do the step 3 through 4 operation, and enter the Security Code. Approved is displayed. Now, you can use the unit. Deactivating Security Code To deactivate the Security Code function. 1 Select Security code mode Select MENU > Security Clear For how to select Function Control items, refer to 2 Enter Security Code mode Press the Control knob for at least 1 second. When Enter is displayed, [ ][ ][ ][ ] is also displayed. 3 Enter Security Code Operation type Operation Select the digits to enter Push the Control knob towards right Select the Security Code numbers or left. Turn the Control knob or push it towards up or down. 4 Press the Control knob for at least 3 seconds. Clear is displayed. The Security Code function deactivates. 5 Exit Security Code mode English 25