Compact Mixing Console 52/SX. Digital Broadcast Technology

Transcription

1 Series 5 Compact Mixing Console 5/SX Digital Broadcast Technology

2 5/SX Features Input page Equalizer page Dynamics page Main page PPMs, clock, stopwatch, phase metering Snapshots page Aux page Monitoring page Encoder for channel settings, gain, input, Aux level Brilliant TFT/Touch Display with flexible pages for main, EQ, dynamics, input settings, snapshot management Program bus push buttons Pre-listening & talkback speaker with built-in amp Aux bus status indicators Encoder section for control of EQs, dynamics, other settings Channel select push buttons, access to central section PFL push buttons Channel on status light bar OLED displays for 6-character channel names, encoder function, status and input level icons, 60 viewing angle Flexible encoder & OLED display section for additional volume and monitor selectors, studio support GPIO push buttons Monitor selector, expanded by touch-display selector Talkback microphone with built-in preamp On/Off push buttons Professional high-grade volume potentiometers Professional high-grade 00 mm conductive plastic faders Magnetic fixing for panels; flat or angled installation with split options Talkback push buttons Professional push buttons with silent mm travel and multi-colour LEDs Pre-labeled push-button function printed on front panel, film caps allow additional labelling by customer

3 5/SX Overview Compact Mixer - Powerful Features The 5/SX is the new modular compact mixing console for radio and TV. The price-optimised mixer is ideal for On-Air studios, audio workstations and smaller OB vans. It complements DHD's 5/MX and 5/RX product lines. The 5/SX supersedes the RM00D. It offers functions similar to its predecessor, but is now based on the Series 5 firmware platform. The 5/SX is configured with a simplified version of the Toolbox5 software. This version can be extended to allow seamless networking with other Series 5 products, including DSP Control Software and Remote Control PC Software. The console consists of, 8,, or 6 faders and a central control section including talkback microphone, loudspeaker, and a 7" TFT Touch Display. 5/SX consoles are available in flat or angled versions, with split options. The modular -U core with I/O modules and DSP features microphone, headphone, analogue line, digital inputs and outputs (AES3, S/PDIF, USB audio), MADI and Gigabit audio interfaces. The cabling between fader units, central section, DSP units and I/O units is realised solely via Ethernet (DHD audio, PoE mains supply, DHD control IP), thus allowing the usage of the commonly used CAT cabling systems. Toolbox5 DSP Control Software Console & I/O System Sizes height unit I/O system -fader console fader console Inputs/outputs available on XS Multi-I/O Boxes 5-330: Microphone/line inputs Headphone outputs Analogue line inputs 8 Analogue line outputs 8 Digital inputs, AES3/EBU 3 Digital inputs, S/PDIF Digital inputs, USB Digital outputs, AES3/EBU Digital outputs, S/PDIF Digital outputs, USB General purpose inputs 0 General purpose outputs 0 Analogue control inputs Inputs/outputs available on central module 5-00: Talkback microphone PFL/Talkback speaker MADI (hardware option) 5-8: MADI input channels MADI output channels Gigabit audio networking (software option) 5-95: Gigabit audio interface input channels 5 Gigabit audio interface output channels 5 Total number of inputs/outputs (all options): Input channel count Output channel count Expanded system dbu sensitivity stereo max. + dbu max. + dbu opto coupler photo mos relays for external potentiometers built-in, connected via ethernet built-in, connected via ethernet AES0 format, SC/fibre AES0 format, SC/fibre DHD format, RJ5/CAT cable DHD format, RJ5/CAT cable local + network option + MADI option local + network option + MADI option -fader console 6-fader console

4 5/SX Console Layouts Two fader module layouts for different customer preferences 5-00 Fader Modules 5-0 Fader Modules above faders, no buttons below. below faders Fader Modules above faders, no buttons below. 5-0 Fader Modules below faders.

5 5/XS Core & Multi-I/O Box for 5/SX Console XS Multi-I/O Box XS Core 5-80 General purpose inputs & outputs Analogue control inputs S/PDIF digital audio input & output AES3/EBU digital audio inputs & outputs USB digital audio interfaces Serial control (software option) DHD audio, power & control ethernet ports for I/O, TFT, fader and control modules Wordclock and video sync (hardware option) MADI (hardware option) 9" Adapter panel 9" Adapterpanel ½ 9" U module ½ 9" U module Mic/Line inputs & headphone outputs Analogue line inputs & outputs DHD audio, power & control ethernet interface DHD Gigabit audio networking (software option)/dhd network TCP/IP external control option, maintenance Redundant 8 V power supply inputs Rear view XS Multi-I/O Box and XS Core 5-80 High-performance 0-bit floating-point digital signal processing for 3-band full parametric equalizers, subsonic filter, dynamics, limiter, delay for all 6 fader channels, mono or stereo 3 summing busses, Aux busses, clean feeds and PFL 6 clean feeds (mix-minus, mono or stereo) monitoring busses for control room and studio support flexible talkback, logic and GPIO system integrated routing matrix internal tone generator Gigabit audio network for 5 input and 5 output channels for low-latency interconnection between 5/XS cores or to other DHD products USB audio interface for direct connection to PC internal or external 8 khz or. khz sync Front view XS Core and XS Multi-I/O Box stand-alone system does not require a PC; no fan, no hard disc, no battery inside highly efficient external, wide-range power supply, Energy Star Level V, redundancy option minimal system power consumption expandable modular system allows optional integration with other DHD product lines serial or TCP/IP interface options to radio automation or other external control systems

6 5/SX Modules and Specifications version Product Number 5-00A 5-00A 5-0A 5-08A 5-330A 5-80A 5-80A A 5-98A A 5-60A 5-606A 5-608A 5-60A 5-6A 5-68A 5-307A 5-80A 5-806A 5-808A 5-80A 5-8A 5-88A 5-308A Product Name SX Central Module SX Fader Module SX Fader Module SX Blank Module XS Multi-I/O Box XS Core,8-6 Fader Processing XS Core, Fader Processing XS Core AES0 MADI Submodule XS 9" Adapter Panel XS Power Supply 8 V / 0 W XS Core Toolbox Support XS Core Gigabit Audio Networking XS Core Control Networking TFT/Touch Display, 7" Table-Top Stand for 5-07 Console Mounting Kit for 5-07 Description 9 push buttons, volume controls 6 rotary encoders 3-character OLED display built-in loudspeaker/amp, mic/preamp fader channels, each with: - 5 push buttons above fader - 3-character OLED display - 00 mm conductive plastic faders - rotary encoder fader channels, each with: - push button below, above fader - 3-character OLED display - 00 mm conductive plastic faders - rotary encoder 80mm x 399mm x 36mm mic/line inputs, preamp, 8 V stereo headphone outputs 8 analogue line inputs, el. bal., dbu 8 analogue line outputs, el. bal., dbu 3 AES3/EBU inputs, S/PDIF input AES3/EBU outputs, S/PDIF output USB audio IF, 0 GPI, 0 GPO, ACI DSP/controller 8 audio, power & control ports supports SX console with up to 6 faders number of available functions limited by XS core hardware, see specifications DSP/controller audio, power & control ports supports -fader SX console number of available functions limited by XS core hardware, see specifications 56 or 6 in/out channels submodule for 5-80, 5-80 multimode fibre, SC for housings / 9" width input voltage 90-6 VAC allows Toolbox5 configuration instead of configuration assistant with predefined function set Gigabit audio interface to DHD routers or other DHD mixers control interface for logic exchange between DHD devices 7" / 77 mm diagonal size aluminium extrusion frames for flat installation magnetic fixing for panels table cutout required angled console frame with metal sides rear height 5 mm magnetic fixing for panels simple table cutout required Typical fader mixer 3 Typical 6 fader mixer, split Mic/Line Input Specifications Input sensitivity: Gain setting: Frequency response: Dynamic range: THD+N: Equivalent input noise: Phantom power 8 V: Max. input level: Converter technology: Analogue Line Input Specifications Max. input level: Frequency response: THD+N: Dynamic range: Converter technology: Analogue Line Output Specifications Max. output level (phones, single-ended): Minimum load (outputs short-circuit protected): Frequency response: THD+N: Dynamic range: Converter technology: Digital Input/Output Specifications Input/output impedance: Input sensitivity: Sample rate converters (SRC): SRC sampling frequency range: Dynamic range (SRC off): Output level: Output dither: 5/SX Mounting Frames Table-Installation Frames 5-6xx -77 dbu... 8 dbu analogue preamp 0 db, 8 db db in steps of db, db digital gain in steps of db < 0. db (0 Hz... 0 khz) 08 db (A-weighted) < 0.00% (+7 dbu, 0 db gain) < -7 dbu (50 ohm source) switchable per input channel, 8 V 8 dbu (balanced) bit, oversampling sigma-delta dbu (balanced) < 0. db (0 Hz... 0 khz) < 0.005% (+3 dbu) 05 db (A-weighted, typical) bit, oversampling sigma-delta dbu (balanced) 600 ohm < 0. db (0 Hz... 0 khz) < 0.005% (+3 dbu, 600 ohm load) 0 db (A-weighted, typical) bit, oversampling sigma-delta 0 ohm (AES3/EBU) or 75 ohm (S/PDIF) > 00 mv inputs and outputs (switchable, slaved to related input) 3 khz... 9 khz db (-bit digital audio) 3. V (into 0 ohm load) off, 6, 0 bit (switchable by configuration software) Console Frames 5-8xx Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights. DHD Deubner Hoffmann Digital GmbH Haferkornstraße 5 09 Leipzig / Germany info@dhd-audio.com