OMAP SW. Release Notes. OMAP Software Tools OST version 2.5 Release. 16xx/1710/242x platforms. Document Revision: 2.5 Release

Transcription

1 OMAP SW OST version 2.5 Release 16xx/1710/242x platforms Document Revision: 2.5 Release Issue Date: 29 th July 2005 Revision: 2.5 Release 13 th July 2005 Table of Contents Page i

2 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its products to the specifications applicable at the time of sale in accordance with TI s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Customers are responsible for their applications using TI components. In order to minimize risks associated with the customer s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such products or services might be or are used. TI s publication of information regarding any third party s products or services does not constitute TI s approval, license, warranty or endorsement thereof. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations and notices. Representation or reproduction of this information with alteration voids all warranties provided for an associated TI product or service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use. Resale of TI s products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use. Also see: Standard Terms and Conditions of Sale for Semiconductor Products. Mailing Address: Texas Instruments Post Office Box Dallas, Texas Copyright 2005, Texas Instruments Incorporated Table of Contents Page ii Revision: 2.5 Release 29 th July 2005

3 OMAP is a Trademark of Texas Instruments Incorporated Code Composer Studio is a Trademark of Texas Instruments Incorporated All other trademarks are the property of the respective owner. Revision: 2.5 Release 13 th July 2005 Table of Contents Page iii

4 TABLE OF CONTENTS TABLE OF CONTENTS...iv LIST OF TABLES... iv 1. Introduction OST Tools New Features Changes from OST Tools version 2.4 to version 2.5 Release OST Tools Functional Components Supported Platforms Installation Minimum System Requirements Hardware Software Installation Guide Release Information File and Directory Structure Known Issues Monitor Resolution NAND Support for 16xx/17xx LIST OF TABLES Table 1 Platforms Supported by OST V2.5 Release...4 Table 2 Release Documentation...9 Table of Contents Page iv Revision: 2.5 Release 29 th July 2005

5 DOCUMENT REVISION HISTORY Revision Modified by Date Comments 2.1 Engineering 27 October 2004 First Cut 2.2 Engineering 10 November 2004 Modified for 2.2 release 2.3 Engineering 17 March 2005 Modified for 2.3 release 2.4 Engineering 27 June 2005 Modified for 2.4 release 2.5 Engineering 29 July 2005 Modified for 2.5 Release Revision: 2.5 Release 13 th July 2005 Page 1 of 1

6 1. Introduction Please read this Release Note carefully prior to installation and use of the software. This Release provides application download and flashing capability for the OMAP 16xx, 1710 and 242x Software Development Platforms. Note: Please always check extranet or contact your local TI sales representative for the latest tools releases OST Tools New Features Changes from OST Tools version 2.4 to version 2.5 Release Apart from supporting 2.4Eng Release features, OST Tools 2.5 Release has the following changes: Support for downloading, flashing and uploading from Sibley Flash. Support for downloading, flashing and uploading from ONENand Flash. Support for Symbian HRP Platform. Using Image Formatting Tool 3.2.1, support for Symbian HRP ONENand Flash GP signing The features added in OST Tools 2.4 Release User needs to install encryption library Open SSL separately to use the signing feature of OSTTools. Refer Section for details. Fixed OST Host freeze issue while downloading big images using USB interface. Using Image Formatting Tool 3.2, Fix for Initial SW Entry point in X-LOADER and fix for the GP device signing issue for 16xx/17xx platforms. RMR Support is validated on 2420 HS platforms. Fixed the R&D certificate "Debug Mode" bits not getting updated issue. Fix for updating existing R&D certificates. Support for contiguous 64MB SDRAM configuration in 2420 ES2.x platforms. RMR Support is validated on 2420 HS platforms. Page 2 of 2 Revision: 2.5 Release 29 th July 2005

7 Lists the available COM ports (up to 6) by scanning the available COM ports for interface. Signing library ift.dll is loaded dynamically only when signing features is used. Added support for the new platforms which are listed below ES2.05(EMU/HS,GP) ES2.1(EMU/HS,GP) -2420POP ES2.05(EMU/HS,GP) - Not validated -2420POP ES2.1(EMU/HS,GP) Not validated ES2.05(EMU/HS,GP) ES2.1(EMU/HS,GP) The following are changes made to the GUI of the Tool - The dropdown list is added for selecting the interface. - Some more platforms are added in the dropdown list for selecting platforms. Note: Select platform 2420 ES 2.1 SDP from OSTTools drop down list while downloading to 2420 ES SDP. OSTTools RMR support validated on 2420 ES 2.1 HS devices. RMR support not validated on 2420 ES device. The features added in the 2.3 Release Integrated IFT [Image Formatting Tool] and OST Tool for 16xx/17xx/24xx platforms Support for DIO format [A flash format used by Magneto] Supporting Common Flash interface Support for Multiple downloading to NOR/NAND Flash [Without resetting the Target] USB interrupt mode support for 24xx platforms Supporting 1710 ES2.0 and 2420 ES2.0 Uploading support for NAND RMR Support for 16xx/17xx/24xx platforms. [RMR is validated only on OMAP 16xx/17xx HS platforms] - Generating Public Keys Certificate, RD Certificate and Protected Application - Signing certificates - Assembling signed and unsigned certificates to make a signed image 1.2. OST Tools Functional Components OST Tools consist of a reference set of low-level tools supporting OMAP 16xx/17xx/242x SDPs. OST functions include booting, flash writing and reading, and target downloading. Revision: 2.5 Release 13 th July 2005 Page 3 of 3

8 OST Host Host Downloading Tool: Supports Boot ROM downloads through UART/USB OST Load Target Downloading Tool: Supports Boot ROM downloads through UART/USB OST Flash IFT DLL Target Flash Writing Software: Supports NOR devices and NAND devices Image formatting Tool to support security features 1.3. Supported Platforms Table 1 Platforms Supported by OST V2.5 Release Platform Type Revision Status 1623 ES1.0 HS Rev B.3 Rigorously tested 1623 ES1.0 GP Rev B.6 Rigorously tested 1710 ES2.0 HS Rev C.3 Rigorously tested 1710 ES1.0 EMU Rev C.2 Rigorously tested 1710 ES2.0 EMU Rev C.3 Rigorously tested 2420 ES1.0 Menelaus DDR EMU Main Board Rev C.2, Processor board Rev A.2 Rigorously tested 2420 ES1.0 Menelaus SDR EMU Main Board RevC.2, Processor board Rev A.3 Rigorously tested 2420 ES 2.0 Menelaus DDR GP Main Board Rev C.1, Processor board Rev A.2 Rigorously tested 1610 ES1.0 HS Rev. C (p2-expansion Board) + H2 Sample Rev. B.8 Sanity tested 1621 ES1.0 GP Rev. C.3 Sanity tested 2420 Non Menelaus EMU Main Board Rev A.2, Processor board Rev B.2 Sanity tested 2420 ES ES2.1 GP EMU/ HS GP EMU/ HS GP rigorously tested HS rigorously tested. Page 4 of 4 Revision: 2.5 Release 29 th July 2005

9 Platform Type Revision Status 2420POP ES POP ES ES ES ES1.0 Menelaus Stacked DDR 2422 ES2.0 GP EMU/ HS GP EMU/ HS GP EMU/ HS GP EMU/ HS EMU Main Board RevC.2, Processor board Rev B.1 GP EMU/ HS Not tested Not tested GP rigorously tested GP sanity tested EMU sanity tested GP rigorously tested Symbian HRP (2420 ES 2.1) GP Rigorously tested 2. Installation 2.1. Minimum System Requirements Hardware This Release requires: IBM compatible host development PC running Microsoft Windows 2000 COM1 port User must have administrative privileges on this machine. 9-pin null modem serial cable. Any of the platform mentioned in the Table 1 This release was tested on a machine with a Pentium 3 (600 MHz) processor, 128 MB RAM with Windows 2000 service pack 3 Revision: 2.5 Release 13 th July 2005 Page 5 of 5

10 Software IFT requires the following encryption routines: SHA1 and RSA. These are not included in this release. For testing purposes, TI has used encryption libraries from the Open SSL project ( Open SSL version 0.9.7g was used to test this release of IFT. (Open SSL library package can be obtained from the URL: Once Open SSL is installed, Open SSL DLLs will be available under WINNT\System32\ standard path and user need not copy it to OSTTools directory) Installation Guide Following screen shots show the installation of OST. 1. Double click on the OST_Version_2.5_Binary_Setup.exe. A welcome screen will appear 2. Now click Next Page 6 of 6 Revision: 2.5 Release 29 th July 2005

11 3. Accept the license agreement and click next 4. Select the installation path and click next Revision: 2.5 Release 13 th July 2005 Page 7 of 7

12 5. Click install to continue with the installation 6. Progress bar will be displayed while installing the package. Page 8 of 8 Revision: 2.5 Release 29 th July 2005

13 7. Click finish to complete the installation and check on view ReadMe to open the ReadMe file automatically after the installation. 3. Release Information The documents listed in Table 2 provide release information and software usage instructions. Table 2 Release Documentation Description File Purpose Release notes OST_Tools_ReleaseNotes_v2_5_Binary.pdf This Document. Release contents, changes, issues, installation, configurations etc. Quick Start Guide OST_Tools_QuickStartGuide2_5.pdf Usage instructions for OST Tools software. Reference Guide OST_Tools_Reference_Guide.pdf Switch settings information Signing Guide OST_Tools_Image_Formatting_Guide.pdf User Guide for RMR Features / Signing Revision: 2.5 Release 13 th July 2005 Page 9 of 9

14 3.1. File and Directory Structure After a successful installation of OST_Version_2.5_Binary_Setup.exe, a directory/file tree as shown below is created at the user specified path Docs OST_Tools_Image_Formatting_Guide.pdf OST_Tools_QuickStartGuide2_5.pdf OST_Tools_Reference_Guide.pdf OST_Tools_ReleaseNotes_v2_5_Binary.pdf Readme.txt +---OMAP_Host ift.dll OST_CommsDLL.dll OST_Flash_16xx.out OST_Flash_24xx.out OST_Host.exe OST_Load_16xx.out OST_Load_16xx.raw OST_Load_EMU_16xx.2nd OST_Load_EMU_24xx.2nd OST_Load_EMU_24xx.out OST_Load_EMU_24xx.raw OST_Load_GP_16xx.2nd OST_Load_GP_24xx.2nd OST_Load_GP_24xx.out OST_Load_GP_24xx.raw \---IFT ift_2nd_omap1_gp.cfg ift_2nd_omap1_hs.cfg ift_2nd_omap2_gp.cfg ift_2nd_omap2_hs.cfg ift_omap1_gp.cfg ift_omap1_hs.cfg ift_omap2_gp.cfg ift_omap2_hs.cfg pa0.cfg pa1.cfg pa2.cfg pa3.cfg pa4.cfg pa5.cfg pa6.cfg pa7.cfg +---Certificates DSw_Certificate Keys Page 10 of 10 Revision: 2.5 Release 29 th July 2005

15 PA_Certificate_16xx PPA16xx PPA17xx PPA24xx RD RD_16xx RD_24xx subapp0 subapp1 subapp2 subapp3 \---Keys OEM1.pem OEM2.pem RD_DOMAIN.pem RD_PROTAPP.pem RD_SW.pem ROOT.pem SEC.pem +---Sample_Images +---COFF LED_2420.out +---ELF LED_2420.elf \---LED xx_17xx asicid.bin led.emu.ift led.gp.ift led.raw led.raw.2nd led.raw.ift readme.txt \ OST_LED.raw OST_LED_EMU.ift OST_LED_GP.ift readme.txt \---USB_Driver OMAP16xx.inf OMAP1710.inf OMAP2420_ES2_0.inf OMAP24xx.inf usbio.sys Revision: 2.5 Release 13 th July 2005 Page 11 of 11

16 4. Known Issues 4.1. Monitor Resolution Change Request ID: OST Tools GUI Description: Impact: GUI not correctly functional on low resolution monitors, e.g x 600. User cannot press download or exit buttons. Work Around: Not a supported mode. Use high-resolution monitor. [Resolutions higher than or equal to 1024 X 768, Display Font Size: Small Font (In Advanced option of Display Properties) 4.2. NAND Support for 16xx/17xx NAND Support is not there for 16xx/17xx platforms - End of document - Page 12 of 12 Revision: 2.5 Release 29 th July 2005