Now you can Afford the most advanced Brake Lathe. Rels 2000 Combination Rotor & Drum Brake Lathe. Specifications: 150 and 200 RPM

Transcription

1 1 rake Lathe Now you can fford the most advanced rake Lathe Rels 2000 ombination Rotor & rum rake Lathe Serpentine pulleys and belt give you a faster, quieter machine by increasing RPM s while reducing chatter and vibration. The modern design of the drum feed and rotor feed gear boxes eliminates high maintenance mechanical gears. Internal parts are compatible with the mmco 4000 means familiar design with revolutionary improvements. Turn rotors faster and get the best possible finish with the new revolutionary infinitely variable speed gearbox. Specifications: ut-off switches eliminate the need for plastic gears which are expensive and timely to replace. ouble ended drum tool bar allows for turning small drums. onvenient storage tray means your tools are where you need them. Hardened and ground spindle eliminates the need for boots. ench and omposite Rotor dapters are standard. Separate motors on the drum and rotor feed maximize the main motor s efficiency. Spindle Speed 150 and 200 RPM rossfeed Speed Infinitely variable, 0 to.010 per revolution Spindle eed Infinitely variable, 0 to.020 per revolution Spindle Travel 6 7/8 Rotor Width 1 3/4 rum iameter 6 to 28 Rotor iameter 17 rum / Rotor weight 150 lbs. w/ standard rbor 250 lbs. w/ 1 7/8 rbor Motor 1 HP.115V, 60HZ, 1PH (Other voltage vailable) Shipping weight 681 lbs. RLS 2000 Standard dapter Set #47300 Hubless dapter #10435 Lg. acking Plate 6.75 O #10436 Sm. acking Plate 5.25 O #10438 Sm. up w/ uilt-in-spring 5.25 O #10439 Lg. up w/ uilt-in-spring 6.75 O #44040 bl. Tapered ollet x #44042 bl.tapered ollet x H #44044 bl. Tapered ollet x I #44046 bl. Tapered ollet x J #44048 bl. Tapered ollet x K #44001 entering one x 2.25 L #40096 Self-ligning Spacer 1 5/8 long M #40161 Spacer 1/2 long R J I H K S X L Q T W M P N V O U N #44102 Spacer 2 long O #44140 ell lamp 4 1/4 O P #44130 Step dapter 1 x 2 Q #44500 Spring R #11486 rum Silencer S #11488 Universal Silencer band T #40144 Large Wrench U #11493 Large Rubber Silencer V #11492 Small Rubber Silencer W #40145 Small Wrench X #25110 Spanner Wrench #40194 Safety Shield (not shown)

2 2 rake Lathe The ideal machine to do rotors fast and accurately Rels 2000RO rake Lathe The 2000RO is the Rotor Only version of our famous 2000 lathe This means you get the speed and accuracy of our state of the art 2000 lathe which will allow you to machine rotors quickly and get a far superior finish to a new rotor. Hardened and ground spindle means no damage from dropping large items on the machine. ench and composite rotor adapters are standard. Specifications: Very heavy duty construction makes this machine bullet proof. RLS complete hubless adapter plus system is included as standard with this machine. The 2000RO model offers the same precision machining capabilities as our 2000 lathe but gives you the capability to machine rotors faster and take advantage of the fact that 85% of your work today will be done on rotors. Spindle Speed 150 and 200 RPM rossfeed Speed Infinitely variable, 0 to.010 per revolution Rotor Width 1 3/4 Rotor iameter 17 Rotor weight Motor Shipping weight 150 lbs. w/ standard rbor 250 lbs. w/ 1 7/8 rbor 1 HP.115V, 60HZ, 1PH (Other voltage vailable) 668 lbs. RLS 2000RO Pack Kit #47300 Hubless dapter #10435 Lg. acking Plate 6.75 O #10436 Sm. acking Plate 5.25 O #10438 Sm. up w/ uilt-in-spring 5.25 O #10439 Lg. up w/ uilt-in-spring 6.75 O #44040 bl. Tapered ollet x #44042 bl.tapered ollet x H #44044 bl. Tapered ollet x I #44046 bl. Tapered ollet x J #44048 bl. Tapered ollet x K #44001 entering one x 2.25 L #40096 Self-ligning Spacer 1 5/8 long M #40161 Spacer 1/2 long I R J H K S L X Q T W M P N V O U N #44102 Spacer 2 long O #44140 ell lamp 4 1/4 O P #44130 Step dapter 1 x 2 Q #44500 Spring R #11486 rum Silencer S #11488 Universal Silencer band T #40144 Large Wrench U #11493 Large Rubber Silencer V #11492 Small Rubber Silencer W #40145 Small Wrench X #25110 Spanner Wrench #40194 Safety Shield (not shown)

3 rake Lathe Heavy uty and built to last a lifetime Rels 2000XL Heavy uty rake Lathe The 2000XL is the heavy duty version of our famous 2000 lathe. Very heavy duty construction makes this machine bullet proof This means you get the speed and accuracy of our state of the art 2000 lathe and the extended spindle travel that you need to machine large heavy duty drums. Hardened and ground spindle means no need for boots and no damage from dropping large items on the machine. RLS complete hubless adapter plus system is included as standard with this machine. The 2000XL model offers the same precision machining capabilities as our 2000 lathe but gives you the capability to machine a 9 7/8 deep drum. ench and omposite Rotor dapters are standard. Specifications: Outboard support is optional. Spindle Speed 150 and 200 RPM rossfeed Speed Infinitely variable, 0 to.010 per revolution Spindle eed Infinitely variable, 0 to.020 per revolution Spindle Travel 9 7/8 Rotor Width 1 3/4 rum iameter 6 to 28 Rotor iameter 17 rum / Rotor weight 150 lbs. w/ standard rbor 250 lbs. w/ 1 7/8 rbor Motor 1 HP.115V, 60HZ, 1PH (Other voltage vailable) Shipping weight 712 lbs. RLS 2000 Standard dapter Set #10437 Truck acking Plate 7.40 O #10440 Sm. Truck one x 5.25 #10440 Lg. Truck one x 6.25 #10435 Lg. acking Plate 6.75 O #10439 Lg. up w/ uilt-in-spr O #10436 Sm. acking Plate 5.25 O #10438 Sm. up w/ uilt-in-spr O H #44052 bl. Tapered ollet x I #44050 bl. Tapered ollet x J #44048 bl. Tapered ollet x K #44046 bl. Tapered ollet x L #44044 bl. Tapered ollet x M #44042 bl.tapered ollet x N #44040 bl. Tapered ollet x1.670 O #44301 Locator P #44303 Lg. entering one x 4.25 T W H I J K L V M N X Z Y U S O Q P R Q #44303 Sm. entering one x 3.2 R #44309 ombination Nut & Spacer S #25110 Spanner Wrench T #44140 ell lamp 4.25 O U # one x 2.25 V #44130 Step adapter 1 x 2 W #44500 Spring X # " Spacer Y #40096 Self-ligning Spacer Z # /2 Spacer #11486 rum Silencer #40144 Large Wrench #40145 Small Wrench #11488 Universal Silencer #11492 Small Rubber Silencer #11493 Large Rubber Silencer #40194 Safety Shield 3

4 4 rake Lathe dapters RLS Part # escription RLS Part # escription RLS PTR PLUS SYSTM L H K eluxe dapter Plus System (includes all parts) Large acking Plate 6.75 O (171.45mm) Small acking Plate 5.25 O (133.35mm) Truck Plate 7.40 O (187.96mm) Sm. dapter up w/spring 5.25 O (133.35mm) Lg. dapter up w/spring 6.75 O (171.45mm) Sm. Truck one x 5.25 ( x mm) Popular dapter Plus Sets I J dds right on to most hubless adapters oes almost all of your hubless drum and rotor work liminates the need for conventional bell clamps and cones uilt-in springs so you don t lose them. Works On: Passenger ar Hubless rums and Rotors 2 5/32 to 4 center hole size ll omposite Rotors: Trucks and ars Light and Medium Truck rums 4 to 6 1/4 enter Hole Size Lg. Truck one x 6.25 ( x mm) H Locator its on 1 rbor I Sm. Hubless dapter one x 3.25 (53.97 x 82.55mm) J Lg. Hubless dapter one x 4.25 (97.37 x mm) K Nut & Spacer L Spanner Wrench Other dapter Plus Sets Small rum & omposite Rotor Set Includes Parts & eluxe Small rum & omposite Set Includes Parts,,H,I,J,K, & L Hubless dapter Includes Parts H,I,J,K, & L Large rum & omposite Rotor Set Includes Parts & eluxe Large rum & omposite Kit Includes Parts,,H,I,J,K, & L Light & Medium Truck Set Includes Parts,, & rum & omposite Rotor Set Includes Parts,,, & eluxe Light & Medium truck Set Includes Parts,,,H,I,J,K, & L eluxe rum & omposite Rotor Set Includes Parts,,,,H,I,J,K, & L dapter Plus System Includes Parts,,,,, &

5 rake Lathe dapters OM Part # - RLS Part # escription OM Part # - RLS Part # escription QULITY PTR SYSTM for Hubless Rotors and rums Interchangeable with mmco daptek* Heavy mass reduces chatter on all light weight and older lathes. Works on all 1 arbors U M S omplete set includes passenger car and light truck composite rotor adapter. H I L J K N T P R O Q dapter ase 4.80 O (121.92mm) Rev. entering one 2.05 x 3.99 (52.07 x mm) Spacer 2.00 Long (50.08mm) lange Plate for utos 5.03 O (127.76mm) Light Truck lange Plate 7.25 O (184.15mm) Light Truck lange Plate O (168.27mm) Light Truck lange Plate 6.75 O (171.45mm) H entering one 1.84 x 2.20 (46.74 x 55.88mm) I entering one 2.12 x 2.48 (53.85 x 62.99mm) J entering one 2.38 x 2.75 (60.45 x 69.85mm) K entering one 2.65 x 3.03 (67.31 x 76.96mm) L entering one 2.93 x 3.30 (74.42 x 83.82mm) M entering one 3.20 x 3.58 (81.28 x 90.93mm) N entering one 3.48 x 3.85 (88.39 x 97.79mm) O entering one 3.75 x 4.13 (95.25 x mm) P entering one 4.03 x 4.40 ( x mm) Q entering one 4.30 x 4.68 ( x mm R entering one 4.58 x 4.95 ( x mm) S entering one 4.85 x 5.23 ( x mm) T entering one 4.75 x 5.5 ( x mm) U Spring Popular Quality dapter Sets dapter Set for cars & Lt. Trk. to 1/2 Ton Includes Parts:,, (2),, H, I, J, K, L, M, N & U dapter Set for 3/4 & 1 ton Lt. Truck Includes Parts:,, O, P, Q, R, S, U Other Quality dapter Sets dapter Set for passenger cars Parts:,, (2),,H, I, J, K,L, & U PRT O PTK SYSTM dapter Set for odd center holes Includes Parts:,, (3) PRT O PTK SYSTM dapter Set for Trucks up to 1/2 Ton Includes Parts:, M, & N PRT O PTK SYSTM 5

6 6 rake Lathe dapters RLS Part # escription RLS Part # escription Three-Jaw huck System for Hubless Rotors and rums Works on all 1 rbors Holds rums and Rotors firmly, eliminating runout Mounts almost all foreign and domestic applications Works on enter Holes 2 1/8 to 3 3/4 Versitale, Simple, and asy to Use Set includes huck and acking plate omplete Kwik-huck Set Quick huck & Standard Plate Standard acking plate 5.25 O (133.35mm) Small acking plate 4.75"O (120.65mm) Large acking plate 7.25 O (184.15mm) Truck Jaws 11/16 rbor & dapters /16 rbor set for 2000 rake Lathe 40163X 11/16 rbor alone /16 rbor Nut Self-ligning Washer Set /16 Spacer 1/2 long (2) /16 Spacer 1 long /16 entering one.77 x (19.5 x 34.93mm) 1 rbor rbor rbor Nut rum oring ar and Upper & Lower oring ar lamp rum oring bar Upper oring bar clamp Lower oring bar clamp

7 rake Lathe dapters RLS Part # escription RLS Part # escription Special 1 dapters Special Rotor dapter llows you to turn certain 3/4 and 1 Ton rotors by bolting adapter to flange plate and not removing it. Used on hevy ord, and odge Trucks plus ord & hevy four wheel drive Sealed earing onnection ar or use with rotors with sealed bearings (ord Probe tc.) llows you to turn this rotor without removing the hub. Stops the rotor from turning on the arbor 1 Solid ones for Hubless rums and Rotors entering one x 1.75 (31.75 x 44.45mm) 44001* entering one x 2.25 (30.15 x 57.15mm) entering one 1.85 x (30.16 x 86.36mm) entering one x (43.26 x 69.85mm) entering one x (59.13 x 75.39mm) 44007* entering one x (67.31 x 81.89mm) entering one x (73.41 x 88.90mm) H entering one x (86.89 x mm) I entering one x (98.42 x mm) J entering one x ( x mm) K entering one x ( x mm) *No picture K I J Set of Nine ones 1.062" x x mm H 1 Solid ouble Tapered ollets for Hub Type rums and Rotors Set of 5: enter Hole Set of 2: enter Hole bl. Tapered ollet x (33.58 x 42.42mm) bl. Tapered ollet x (34.59 x 43.43mm) bl. Tapered ollet x (43.46 x 52.65mm) bl. Tapered ollet x (52.68 x 61.98mm) bl. Tapered ollet x (62.00 x 73.58mm) bl. Tapered ollet x (72.16 x 81.03mm) bl. Tapered ollet x (81.05 x 90.42mm) 7

8 8 rake Lathe dapters RLS Part # escription RLS Part # escription 1 Spacers Spacer, Self ligning 1 5/8 Long (41.27mm) 1 enter Hole Spacer 1 Long (25.4mm) 1 enter Hole Spacer 2 Long (50.8mm) 1 enter Hole Spacer 1/2 Long (12.7mm) 1 enter Hole Step dapters Step dapter 1 7/8 to Step dapter 2 to Step dapter 1 7/8 to 1 Set of Three Step dapter 2 to 1 Set of Three ell lamps & Springs -1 enter Hole ell lamp O (92.07mm) 1 enter Hole ell lamp O (158.75mm) 1 enter Hole ell lamp O (107.95mm) 1 enter Hole ell lamp O (184.15mm) 1 enter Hole ell lamp O (146.05mm) 1 enter Hole Spring

9 9 rake Lathe dapters RLS Part # escription RLS Part # escription 1 Light Truck dapter Sets Light Truck Set ell lamp 7.25 O (184.15mm) ell lamp 6.25 O (158.75mm) entering one x (98.43 x mm) entering one x ( x126.21mm) entering one x 5.50 ( x mm) Spring 1 dapter Sets sold with mmco rake Lathe Package : 1 dapter Set includes: /2 Spacer pc. ollet Set includes: bl. Tapered ollet x (33.58 x 42.42mm) bl. Tapered ollet x (34.59 x 43.43mm) bl. Tapered ollet x (43.46 x 52.65mm) bl. Tapered ollet x (52.68 x 61.98mm) bl. Tapered ollet x (62.00 x 73.58mm) dapter Set for Passenger ars dapter ase 4.80 O (121.92mm) Rev. entering one 2.05 x 3.99 (52.07 x mm) Spacer 2.00 Long (50.08mm) lange Plate for utos 5.03 O (127.76mm) entering one 1.84 x 2.20 (46.74 x 55.88mm) entering one 2.12 x 2.48 (53.85 x 62.99mm) entering one 2.38 x 2.75 (60.45 x 69.85mm) entering one 2.65 x 3.03 (67.31 x 76.96mm) entering one 2.93 x 3.30 (74.42 x 83.82mm) Spring Self ligning Spacer 1 5/8 long Package 1 dapter Set includes: Package See bove Lt.Truck Set (up to 1/2 Ton) Includes: Light Truck lange Plate O (168.27mm) entering one 3.20 x 3.58 (81.28 x 90.93mm) entering one 3.48 x 3.85 (88.39 x 97.79mm) 2 3

10 10 rake Lathe dapters RLS Part # escription RLS Part # escription 1 dapter Sets sold with mmco rake Lathe ont Package 1 dapter Set includes: Package See bove Lt. Truck Set (up to 1 Ton) Light Truck lange Plate 7.25 O (184.15mm) Light Truck lange Plate 6.75"O (171.45mm) entering one 3.75 x 4.13 (95.25 x mm) entering one 4.03 x 4.40 ( x mm) entering one 4.30 x 4.68 ( x mm) entering one 4.58 x 4.95 ( x mm) entering one 4.85 x 5.23 ( x mm) bl. ollets for Hub Type Light Trucks bl. Tapered ollet x (72.16 x 81.03mm) bl. Tapered ollet x (81.05 x 90.42mm) Package 1 dapter Set includes: entering one x 1.75 (31.75 x 44.45mm) entering one x 2.25 (30.15 x 57.15mm) entering one 1.85 x (30.16 x 86.36mm) entering one x (43.26 x 69.85mm) entering one x (59.13 x 75.39mm) entering one x (73.41 x 88.90mm) entering one x (86.89 x mm) H bl. Tapered ollet x1.670 (33.58 x42.42mm) I bl. Tapered x (34.59 x 43.43mm) J bl. Tapered ollet x (43.46 x 52.65mm) K bl. Tapered ollet x (52.68 x 61.98mm) L bl. Tapered ollet x (62.00 x 73.58mm) M Self ligning Spacer 1 5/8 long N /2 Spacer O ell lamp O.(92.07mm) P ell lamp O. (107.95mm Q ell lamp O.(146.05mm) R ell lamp O.(146.05mm) S Spring O M N L K S P J I H Q R Package 1 dapter Set includes: Kwik huck & Standard Plate Standard acking plate 5.25 O (133.35mm) Small acking plate 4.75 O (120.65mm) Large acking plate 7.25 O (184.15mm) Truck Jaws Three-Jaw huck Set bl. ollets for Hub Type Passenger ars bl. Tapered ollet x (33.58 x 42.42mm) bl. Tapered ollet x (34.59 x 43.43mm) H bl. Tapered ollet x (43.46 x 52.65mm) I bl. Tapered ollet x (52.68 x 61.98mm) J bl. Tapered ollet x (62.00 x 73.58mm) bl. ollets for Hub Type Light Trucks K bl. Tapered ollet x (72.16 x 81.03mm) L bl. Tapered ollet x (81.05 x 90.42mm) M Self ligning Spacer 1 5/8 long N /2 Spacer I J H K L N M

11 11 rake Lathe dapters RLS Part # escription RLS Part # escription 1 7/8 rbors & dapters 1 7/8 rbor /8 rbor ssembly /8 rbor Nut /8 rbor Washer 40164X 1 7/8 rbor alone 1 7/8 ones for Hubless Type rums and Rotors lso vailable with 2 enter Hole H I J K L entering one x (69.05 x 84.67mm) entering one x (83.34 x 98.83mm) entering one x (97.23 x mm) entering one x ( x mm) entering one x ( x mm) entering one x ( x mm) ll ones have 1 7/8 enter Hole entering one x ( x mm) H entering one x ( x mm) I entering one x ( x mm) J entering one x ( x mm) K entering one x ( x mm) L entering one x ( x mm) 1 7/8 ones for Hub Type rums and Rotors entering one x (54.76 x 85.72mm) entering one x (57.15 x 92.07mm) entering one x (91.44 x mm) entering one x (88.90 x mm) entering one x ( x mm) ll ones have 1 7/8 enter Hole

12 12 rake Lathe dapters RLS Part # escription RLS Part # escription 1 7/8 Spacers Spacer 1.25 long Spacer 2.00 long Spacer 3.00 long Spacer 6.00 long ll Spacers have 1 7/8 enter Hole 1 7/8 ell lamps & Spring ell lamp O (158.75mm) ell lamp O (184.14mm) ell lamp O (234.95mm) ell lamp O (304.80mm) Spring ll ell lamps have 1 7/8 enter Holes 1 7/8 Light Medium & Heavy uty Truck Sets Light truck dapters for Hub Type Work 1 7/8 dapter Set Includes: ouble Tapered ollet x (71.83 x 80.90mm) ouble Tapered ollet x (81.36 x 90.42mm) 1 7/8 enter Hole lso vailable with 2 enter Hole

13 13 rake Lathe dapters RLS Part # escription RLS Part # escription 1 7/8 Heavy Truck Sets lso available with 2 center hole Light Truck Set 1 7/8 enter Hole dapter Set includes: (2) ell lamp O (184.15mm) entering one x ( x133.35mm) Step dapter 1 7/8 to 1 (ST O THR NOT PITUR) Spring (lso vailable With 1 enter Hole which eliminates need for step adapters.) ones for Heavy uty Hub Type Work 1 7/8 enter Hole dapter Set includes: entering one x (54.76 x 85.72mm) entering one x (57.15 x 92.07mm) (2) entering one x 4.50 (91.44 x mm) (2) entering one x (88.90 x mm) (2) entering one x 6.00 ( x mm) Spacer 1.25 long (31.75mm) Spacer 2 long (50.80mm) (same as 49499) Large Range Light Truck Set 1 7/8 enter Hole dapter Set includes: (2) ell lamp O (158.75mm) entering one x (97.23 x mm) entering one x ( x 127.0mm) Step dapter 1 7/8 to 1 (ST O THR) Spring (lso vailable With 1 enter Hole which eliminates need for step adapters.) H ones for Heavy uty Hubless Type Work 1 7/8 dapter Set includes: (2) ell lamp 9.25 O mm entering one x ( x139.70mm) entering one x ( x mm) entering one x ( x166.67mm) entering one x ( x mm) entering one x ( x mm) entering one x ( x mm) H Spring Medium uty Truck dapter Set 1 7/8 dapter Set includes: (2) ell ell lamp 9.25 O (234.95mm) entering one x ( x mm) entering one x ( x mm) entering one x ( x mm entering one x ( x mm) Spring xtra Lg. ell & one Set for School us rums 1 7/8 dapter Set includes: (2) ell lamp O (304.80mm) entering one x ( x mm) (2) Spring

14 14 rake Lathe Vibration ampeners RLS Part # escription RLS Part # escription lorescent Silencer bands lip On Silencer lorescent Silencer bands Rubber PK O 2 Silencer and /4 rum Silencer and Rubber PK O 2 Silencer and /4 Truck rum Silencer and Spring Silencer and Universal Silencer and riction Rotor Silencer Used on 3850, 4000, 4100, and 7500 lathe Weighted Silencer and for vented Rotors ouble Strand Weighted Silencer and Weighted Silencer and for vented Rotors Replacement Pads for Swirl inisher Non irectional Polisher rit - Replacement Pads for (10 PK) Non - irectional inisher lex Hone rit - Replacement Pads for (10 PK) Non - irectional inisher

15 rake Lathe Inspection quipment RLS Part # escription RLS Part # escription Micrometers isc Micrometer SMLL isc Micrometer LR lectronic Micrometers lectronic igital Micrometer for Rotors lectronic igital Micrometer for rums ial Indicators ial Indicator auge with pliers US TO MSUR ROTOR N LYWHL RUNOUT ial Indicator Set with magnetic base US TO MSUR ROTOR N LYWHL RUNOUT rum Wear auges rum auge SMLL rum auge LR 15

16 16 rake Lathe arbide Inserts OM Part # - RLS Part # escription OM Part # - RLS Part # escription RLS Positive Rake arbide it or use on drums for 204 series lathe Positive Rake Rotor & rum Insert for RLS 2000 lathe Positive Rake arbide it or use on rotors for 204 series lathe Screw for bits with center hole Positive Rake arbide it or use on 504 series lathe 5 PK /8 Thick Negative Rake Tool it for use on mmco 4000 lathe or RLS 2000 lathe Negative Rake insert or use on mmco 4000 or RLS 2000 lathe oated Positive Rake Rotor it for RLS 2000 same size as Round Tool it PK O oated Negative Rake Rotor it for RLS 2000 U-TURN Positive Rake arbide it or use on 7700, 8910, 8911, 8920, 5 PK 8922,8944 and 8989 Lathe Positive Rake arbide it or use on 7700, 8910, 8911, 8920, 10 PK 8922,8944 and 8989 Lathe Positive Rake arbide it or use on 7700, 8910, 8911, 8920, 10 PK / 100 ITS 8922,8944 and 8989 Lathe Positive Rake arbide it or use on 8750 and PK on car lathe Positive Rake arbide it or use on 8750 and PK on car lathe M/John ean/snap-on Positive Rake arbide it or use on 600 and PK series lathes Positive Rake arbide it or use on 600 and PK series lathes radius Negative Rake arbide it 10 PK or use on 505 on car lathe Positive Rake arbide it or use on 10 PK 505 car lathe Positive Rake arbide it or use on rotors 10 PK 800 series lathe Positive Rake arbide it or use on drums 10 PK 800 series lathe

17 17 rake Lathe arbide Inserts OM Part # - RLS Part # escription OM Part # - RLS Part # escription MMO Round Tool it PK O oated Positive Rake it for 3850,4000,7000,7500 Lathe TWO PK SIX PK Left Hand razed arbide Tool it 5/8 Square Use on 6000,6002 Lathe Screw for 6914, 6918, 7681 PK O Right Hand razed arbide Tool it 5/8 Square Use on 3000, 4000, 4100, 5000,6000,6002 & 7700 Lathe Positive Rake arbide it for 4000, 7000,7500 Lathe TWO PK SIX PK PK O Left Hand razed arbide Tool it 1/2 Square Use on 5000, 6000,6002 Lathe N New RLS bit for 4000, 7000 & works like the round bit but gets in the corners PK O 10 Standard bit on the RLS Right Hand razed arbide Tool it 5/8 Square Use on 5000, 6000,6002 Lathe N xtra Thick Negative Rake it - lasts longer PK O 10 use in place of R / L Hand razed arbide Tool it 5/8 Square Use on 6000,6002 Lathe N Same as but coated for longer life PK O Heavy duty Positive Rake it for 6000 Use with 9695 Tool it Holder N Titanium oated Negative Rake Tool it PK O 10 use in place of Negative Rake it for 1000, 2002, 3000, 4000, 4100, 7000, 7500 Lathe TWO PK SIX PK TN PK PK O PK O 48

18 18 rake Lathe Tool Holders RLS Part # escription RLS Part # escription RLS Standard Positive Rake rum Tool Holder Use with it on 204S & 204 Lathes Positive Rake Round LH Tool Holder Use with it 3836R Positive Rake Right Hand Tool Holder Use with it on 504 Swing rm Lathes Positive Rake Round RH Tool Holder Use with it 3836L Positive Rake Left Hand Tool Holder Use with it on 504 Swing rm Lathes Positive Rake Round RH Tool Holder Use with it Tool Holder Positive Rake RH Tool Holder Use with it RH Tool Holder. Use w/ bit & Tool Holder or bit & Tool Holder Positive Rake LH Tool Holder Use with it LH Tool Holder. Use w/ bit & Tool Holder or bit & Tool Holder urved Positive Rake Right Hand Tool Holder Use with it Negative Rake RH Tool Holder Use with it urved Positive Rake Left Hand Tool Holder Use with it Positive Rake LH Tool Holder Use with it Standard Positive Rake rum Tool Holder Use with it Standard Negative Rake rum Tool Holder Use with 45001

19 19 rake Lathe Tool Holders OM Part # - RLS Part # escription OM Part # - RLS Part # escription MMO Left Handed Tool Holder Holds Tool Holder Use in 6900 and 6950 Twin utters Standard Negative Rake rum Tool Holder Use with 2002, 3000, 4000, 4100 and 7500 Lathes. Use with 6914 bit Right Handed Tool Holder Holds Tool Holder Use in 6900 and 6950 Twin utters Positive Rake rum Tool Holder Use with 6918 bit on 3850 Lathe Negative Rake Right Hand Tool Holder Insert in Use with 3850, 4000, 4100 & 7500 lathes Use with 6914 bit Positive Rake for Small rums Use with 7681 bit on 3000, 4000, & 7700 Lathes Negative Rake Left Hand Tool Holder Insert in Use with 3850, 4000, 4100 & 7500 lathes Use with 6914 bit Set of two Tool it Holders RH and LH Tool Holder Use with 6914 Negative Rake bits Positive Rake Right Hand Tool Holder Use with 7681 or 6418 bit on 3850, 4000, 4100 and 7500 lathes Set of two Positive Rake Tool it Holders RH and LH Tool Holder Use with 7681 or 6918 bit Positive Rake Left Hand Tool Holder Use with 7681 or 6418 bit on 3850, 4000, 4100 and 7500 lathes 90489R urved Positive Rake Right Hand Tool Holder Use with 7681 or 6418 bit on 3850, 4000, 4100 and 7500 Lathes Positive Rake Round Right Hand Tool Holder Use with bit on 3850, 4000, 4100 and 7500 lathes 90489L urved Positive Rake Left Hand Tool Holder Use with 7681 or 6418 bit on 3850,4000, 4100 and 7500 Lathes Positive Rake Round LH Tool Holder Use in bit on 3850, 4000, 4100 and 7500 lathes

20 20 rake Lathe Tool Holders OM Part # - RLS Part # escription OM Part # - RLS Part # escription UTURN Positive Rake Right Hand Tool Holder. Use with bit on all ccuturn Lathes urved Positive Rake Right Hand Tool Holder Use with bit on all ccuturn Lathes Positive Rake Left Hand Tool Holder. Use with bit all ccuturn Lathes urved Positive Rake Left Hand Tool Holder Use with bit on all ccuturn Lathes Short Positive Rake Right Hand Tool Holder. Use with bit on all ccuturn Lathes Zero ngle Positive Rake Tool Holder. Use with bit on all lathes where standard tool holders will not let you get into the corner. JOHN N Positive Rake Right Hand Tool Holder Use with / bit on 600 & 700 series lathes Positive Rake Right Hand Tool Holder. Use with / bit on 600 & 700 series lathes Positive Rake Left Hand Tool Holder Use with / bit on 600 & 700 series lathes urved Positive Rake Right Hand Tool Holder. Use with / bit on 600 & 700 series lathes Positive Rake Left Hand Tool Holder Use with / bit on 600 & 700 series lathes urved Positive Rake Left Hand Tool Holder. Use with / bit on 600 & 700 series lathes

21 rake Lathe Index Part # Page # Part # Page # Part # Page # Part # Page # 2000 Page Page Page Same as with 2" Hole 2000RO Page Page Page Same as with 2" Hole 2000XL Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Same as with 2" Hole 3836R Page Page Page Same as with 2" Hole 3836L Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Page Inside ack over Page Page Page Inside ack over Page Inside ack over Page Inside ack over Page Page Page Inside ack over Page Page Page Page Page Page Page Page Page Page Page N Inside ack over Page Page Page Page Page Page Page Page Page Page Page Page Page Page page Page Page Page page Inside ack over Page Page Page Page Page Page Page Page Page Page Page X Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Inside back cover 40164X Page Page Page Inside back cover Page Page Page Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page Page Page Same as with 2" Hole Page 20