KEYFOB PROGRAMMING FOR ANNO PANEL

Transcription

1 KEYFOB PROGRAMMING FOR ANNO PANEL 3. Press the NO button on the keypad and the screen will display: 4. Press the NO button on the keypad and the screen will display: OMIT INPUTS? Add New User? 6. Press the YES button on the keypad and the screen will display: This is the next available user postition meaning all the previous ones have been allocated. 7. Press the YES button and the screen will display: Empty [04] [ ] 8. Present the new key tag to the keypad (where the BANHAM GROUP logo is), You will hear a bleep and the display will show six (6) asterisk/stars within the brackets. 9. Press the YES button on the keypad and the screen will display: 10. Press YES button on the keypad and the screen will display: Using the ABCD buttons, choose the areas you wish to be controlled by that key tag. Default is User Areas (ABCD). User Type User [0] User Area [ABCD] 11. Press the YES button on the keypad and the screen will display: Default is Unset / Set (0) however if you wish to change it press D to toggle through the options. User Set Options Unset/Set [0] 12. Press YES button on the keypad and the screen will display: Flexi set Yes gives you the opportunity to choose the areas you require to set with the key tag, i.e. A = Full set. B = Night set. Flexi set NO will simply set the areas assigned without offering you the opportunity to choose. To toggle between Yes and No press the D button. 13. Press YES button on the keypad and the screen will display: (If no user name is required press the YES button). Press the numbers on the keypad to select the first letter of the user name, (predictive text may choose a name) providing the first letter is correct press the D button to move the cursor position and repeat. Use the B button to move back and the C button to clear. Press the YES button on the keypad. 14. The display will show: Flexi Set No [0] User Name - Empty [05] If additional key tags are required to be added repeat from step 7. OR If no further key tags are required press the NO button FOUR (4) times and the screen will display: 15. Press the A button and after a few seconds the screen will display: Please test the new key tags and record the user name and number on the back of this sheet and retain in a secure place for future reference.

2 KEYFOB PROGRAMMING FOR ANNO PANEL USER NUMBER USER TYPE AREAS SET/UNSET FLEXI SET USER NAME EXAMPLE USER ABCD (0) YES (1) JOHN EXAMPLE USER A (0) NO (0) CLEANER

3 KEYFOB REMOTE SETTING DEVICE PROGRAMMING FOR ANNO PANEL If your system has not had remote setting devices programmed in before please contact our Technical Support department on to have this facility set up. 3. Press the NO button on the keypad and the screen will display: 4. Press the NO button on the keypad and the screen will display: OMIT INPUTS? Add New User? 6. Press the YES button on the keypad and the screen will display: This is the next available user position meaning all the previous ones have been allocated. 7. Press the YES button on the keypad and the screen display: 8. Press and hold any button on the remote setting device until the LED flashes red/green rapidly. Release the button and the green LED will flash for a few seconds. The screen will now display: Empty [04] [ ] User Name - 9. (If no user name is required press the YES button). Press the numbers on the keypad to select the first letter of the user name, (predictive text may choose a name) providing the first letter is correct press the D button to move the cursor position and repeat. Use the B button to move back and the C button to clear. Press the YES button on the keypad. The screen will display: 10. Press the NO button on the keypad and the display will show: If additional key tags are required to be added repeat from step 7. OR If no further key tags are required press the NO button FOUR (4) times and the screen will display: 11. Press the A button and after a few seconds the screen will display: Select Button Lock [1] Empty [05]

4 KEYFOB REMOTE SETTING DEVICE PROGRAMMING FOR ANNO PANEL Please test the new keyfob remote setting device and record the user name and number on this sheet and retain in a secure place for future reference. USER NUMBER USER TYPE AREAS SET/UNSET FLEXI SET USER NAME EXAMPLE USER ABCD (0) YES (1) JOHN EXAMPLE USER A (0) NO (0) CLEANER

5 DELETE AND REPLACE KEYFOB/USER FOR ANNO PANEL 3. Press the NO button on the keypad and the screen will display: OMIT INPUTS? 4. Press the NO button on the keypad and the screen will display: Add New User? 6. Press the NO button on the keypad and the screen will display: Delete/Change User? 7. Press the YES button and the screen will display: Tag or User Name [01] 8. Press the D button repeatedly on the keypad to scroll up to the user you wish to delete / change and press the YES button and the screen display: Delete User? TO DELETE Press YES. The user has been deleted and the screen will display: Tag or User Name [01] 9. Press the NO button three (3) times and the screen will display: To add / programme the new keyfob refer to the document KEYFOB PROGRAMMING FOR ANNO PANEL And continue from step Press the A button and after a few seconds the screen will display: Please test the new keyfob and record the user name and number on the back of this sheet and retain in a secure place for future reference.

6 DELETE AND REPLACE KEYFOB/USER FOR ANNO PANEL USER NUMBER USER TYPE AREAS SET/UNSET FLEXI SET USER NAME EXAMPLE USER ABCD (0) YES (1) JOHN EXAMPLE USER A (0) NO (0) CLEANER

7 DELETE KEYFOB/USER FOR ANNO PANEL 3. Press the NO button on the keypad and the screen will display: OMIT INPUTS? 4. Press the NO button on the keypad and the screen will display: Add New User? 6. Press the NO button and the screen will display: Delete/Change User? 7. Press the YES button and the screen will display: Tag or User Name [01] 8. Press the D button repeatedly on the keypad to scroll up to the user you wish to delete / change and press the YES button and the screen display: Delete User? TO DELETE Press YES. The user has been deleted and the screen will display: Tag or User Name [01] 9. Press the NO button three (3) times and the screen will display: 10. Press the A button and after a few seconds the screen will display:

8 ENROLLING VISONIC KEYFOB TRANSMITTERS Press BUTTON until the display reads USER SETTING. Press the OK button. Enter your master code. Press BUTTON 5 times until it says ENROLL KEY FOB. Press the OK button. The display will read: KEY FOB NO. Select the number to which the keyfob is to be designated (e.g. No 5) by pressing the BUTTON. NOTE: A black bar at the far right of the display indicates that the position is already used. A clear space at the far right of the display indicates that the position is free. Press OK and the display will prompt you to initiate a transmission from the new keyfob. Initiate the transmission by pressing any one of the buttons on the keyfob. In response, the Happy Tune will sound and the display will change to KEYFOB NO: 5 A black bar will be displayed at the far right, to indicate that the keyfob has been enrolled as Keyfob No. 5. NOTE: IF THE SAME KEYFOB IS ALREADY ENROLLED ELSEWHERE, THE HAPPY TUNE WILL SOUND TWICE IN SUCCESSION, IF THERE IS A PROBLEM AN ERROR TONE WILL SOUND. To exit, press the locked padlock button at the top right hand side of the keypad. The display will say (OK) TO EXIT Press the OK button.

9 KEYFOB PROGRAMMING FOR G2 XPANDER RANGE 3. Press the NO button TWICE (2) on the keypad and the screen will display: 4. Press the YES button on the keypad and the screen will display: 6. Select the next unallocated (EMPTY) user number. (The intruder alarm is supplied with a minimum of three (3) key tags as standard i.e. key tag 1 = user 01, key tag 2 = user 02 etc). To find the next available user press the D button repeatedly to scroll through to the users. If marked empty, press YES. If you are not sure which user numbers are available press the D button to scroll through to a user number (ie 04) and press YES. If the screen shows ENTER USER CODE (******) the asterisk / stars means that it is in use. Press NO, press D press YES until you find an empty user position. Present the new keyfob to the keypad, which will bleep and display six (6) asterisk / stars within the brackets. Press the YES button on the keypad to move to step 7. Change User Codes? Tag [01] User Name [ ] 7. Select the user type for the Keyfob Default is User [0] press YES to move to step 8. However if you wish to change it press D to toggle between User or Manager Press the YES button on the keypad to move to step 8. User Type User [0] 8. Using the ABCD buttons, choose the areas you wish to be controlled by the keyfob. Default is User Areas [ABCD] Press the YES button on the keypad to move to step 9. User Area [ABCD] 9. Select the setting option Default is User Set Options Unset/Set [0] press YES to move to step 10. However if you wish to change it press D to toggle through the options. Press the YES button on the keypad to move to step 10. User Set Options Unset/Set [0] 10. Flexi set Yes gives you the opportunity to choose the areas you require to set with the keyfob, i.e. A = Full set. B = Night set. Flexi set NO will simply set the areas assigned without offering you the opportunity to choose. To toggle between Yes and No press the D button. Press the YES button on the keypad to move to step 11. Flexi Set No [0] 11. The keypad screen will display: (If no user name is required press the YES button). Press the numbers on the keypad to select the first letter of the user name, (predictive text may choose a name) providing the first letter is correct press the D button to move the cursor position and repeat. Use the B button to move back and the C button to clear. Press the YES button to move to step 12. User Name The keypad screen will display: If additional keyfobs are required to be added select the next available user number and repeat from step 6 or press the NO button three (3) times, the display will show: and move to step Press the A button and after a few seconds the screen will display: Tag [04] Or Name [04]

10 KEYFOB PROGRAMMING FOR G2 XPANDER RANGE Please test the new keyfob remote setting device and record the user name and number on this sheet and retain in a secure place for future reference. USER NUMBER USER TYPE AREAS SET/UNSET FLEXI SET USER NAME EXAMPLE USER ABCD (0) YES (1) JOHN EXAMPLE USER A (0) NO (0) CLEANER

11 DELETE AND REPLACE KEYFOB/USER FOR G2 XPANDER PANEL 3. Press the NO button on the keypad and the screen will display: 4. Press the NO button on the keypad and the screen will display: 6. Press the YES button on the keypad and the screen will display: 7. Select the user number you wish to delete, or press the D button repeatedly to scroll through the list of users. Press the YES button on the keypad and the screen display: OMIT INPUTS? Change User Codes? Tag [01] User Name [******] 8. Press the C button and the asterisk/stars will disappear. The user has been deleted and the screen will display: 9. Now offer up the new keyfob to the keypad and the screen will display: 10. Press the YES button and the screen will display: [ ] [******] User Type User [0] 11. AS YOU ARE NOT CHANGING THE WAY THE KEYFOB IS SET UP PRESS THE NO BUTTON FOUR (4) TIMES. The screen will display: 12. Press the A button and after a few seconds the screen will display:

12 DELETE KEYFOB/USER FOR G2 XPANDER PANEL 3. Press the NO button on the keypad and the screen will display: 4. Press the NO button on the keypad and the screen will display: 6. Press the YES button on the keypad and the screen will display: 7. Select the user number you wish to delete, or press the D button repeatedly to scroll through the list of users. Press the YES button on the keypad and the screen display: OMIT INPUTS? Change User Codes? Tag [01] User Name [******] 8. Press the C button and the asterisk/stars will disappear. The user has been deleted and the screen will display: 9. Press the NO button four (4) times and the screen will display: 10. Press the A button and after a few seconds the screen will display: [ ]