Xemio-154 User Manual

Size: px

Start display at page:

Download "Xemio-154 User Manual"

Leonard Hodges
5 years ago
Views:

1 Xemio-154 User Manual User manual Sport MP3 Player with Micro SD Card of 4GB

IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. Cautions Do not place on or near naked flames, such as lit candles.

2 IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. Cautions Do not place on or near naked flames, such as lit candles. Do not place objects filled with liquids such as vases on or near the product. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration. Do not use this product with wet hands. Do not clean this product with water or other liquids. Do not block or cover the slots and holes in the product. Do not push foreign objects into the slots or holes in the product. Do not attempt to open this product yourself. There are no user serviceable parts inside. Do not allow children access to the packaging including plastic bags. Safety Warnings Before using this product, read and follow all warnings and instructions. This product is not intended for use by young children. Young children should be properly supervised. This product is intended for household use only and not for commercial or industrial use. Do not expose to dripping or splashing liquid. No naked flame sources, such as lit candles, should be placed near the product. Ventilation should not be impeded by covering ventilation openings with items such as newspapers, table cloths, curtains and the like. Damage caused by using this product by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty. Note: Dispose of this product responsibly. WARNING: When Driving in the traffic listening to a personal music player can make the listener less aware of potential dangers such as approaching cars and emergency vehicles. WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods. 2

A. Key Navigation and Connection 1 3 4 9 5 6 2 7 8 10 11 No.

3 A. Key Navigation and Connection No. Description Clip Micro USB Port Status LED Indicator (Red and Blue) Earphone Output Jack Reset (Bulit-in tact switch) Memory Card Slot Function For PC connection/charge For charging and play status On/Off, Play/Pause, Back Track/Fast-Backward Next Track/Fast-Forward Volume down Volume up 3.5mm earphone connection For hardware reset Under the Silicon Cover 3

4 B. Insert Micro SD Memory Card (not included) This device is design without an internal memory; before you use it, insert a Micro SD memory card into player. 1. Turn Off the play; 2. Open the silicon cover and then insert the memory card into the player s memory card slot; make sure the memory card is firmly and correctly inserted. Then close the silicon cover back to position. 3. Now you can use the player for upload/download the desired media files with your PC computer. 4. Or, Upload the desired media files direct to the Micro SD memory card direct with your computer before insert it into player. 5. However, the device will turn to OFF automatically in few seconds if Micro SD card not in place or not in proper position. Note: Make sure the player power is in Off status when insert/remove the Micro SD memory card from memory card slot. Otherwise, the player functional may result dead halt or the internal data/files will be lost/damaged. C. About player s battery The Player has an internal, non-user-replaceable rechargeable lithium battery. For best results, the first time you use the player, let it charge for about 2 ~ 3 hours or until the charging LED shows a constant red light. Important: The player may continue to use battery power after it s been turned to standby off mode, if the unit isn t used for a while it will need to be recharged. For longevity of the lithium battery life, we recommended to recharge the battery at least once per month. D. Charging Mode You can recharge the Player s battery in two ways: 1. Connect the player to your computer. Or, 2. Use a USB power wall charger. (not included) 3. The Status LED will blink red when the USB power source is connected. 4. When the battery is fully charged, the Status LED will switch to a constant red light. E. PC Connection Mode 1. Connect the player to a computer 1.1 Connect the player to a Windows OS computer with the USB cable, then USB Mass Storage Device is detected and the related driver is installed by your computer. A removable disk drive will display in the My computer folder where the user can operate Read and Write functions. And the battery will charge in 4

5 the background. (for Windows 2000/XP System or above) 1.2 Or, connect the player with a MAC OS computer, then an Untitled icon will display on the desktop indicating the player is a removable disk, the user can operate Read and Write functions. And the battery is charging in the background. (For Mac System 9.2 or above) Note: In USB power charger or PC connection mode, the player can go to eject mode, press the button to eject from PC connection mode for start the music playback if you wish. 2. Remove the player from a computer: 2.1 If you re using a Windows OS PC, you can disconnect the player in My Computer or by clicking the Safely Remove Hardware icon in the Windows system tray. 2.2 If you re using a Mac OS PC, you can also disconnect player by dragging the player icon on the desktop to the Trash. 2.3 Once it is safe to disconnect the player with your computer, unplug the USB connector from player and then your computer. 2.4 If you accidentally disconnect the player without disconnecting correctly, reconnect it to your computer. Note: Please safely remove the player when connected to the computer, otherwise, the transferring data stored in the Player might be lost. F. Getting Started 1. Power On/Off 1.1 Plug-in the earphone set into the player s earphone output jack; 1.2 Press and hold the button, until the Status LED lights up in blue, to power On the player. 1.3 The blue light will switch to blinking and then the music will play automatically. 1.4 To turn Off the Player; press and hold the button until the status LED light blinks fast and then the Player will switch Off in seconds later. Note: If any unsupported music files are added to the player s memory; the status indicator light will flash fast and then will go Off, and the player will turn Off automatically a few seconds after. 2. Play/Pause Music 2.1 Press the button to pause the playing music. 2.2 Press it again to resume playback. 2.3 If player is in a pause state for 3 minutes, it will turn to standby Off mode automatically. 3. Adjusting the Volume 3.1 Pressing the / button will increase or decrease the volume level one step at a time. 5

6 3.2 Press and hold the / button to increase or decrease volume level continuously. 3.3 For hearing protection; a beep warning will be heard from the earphones every time you increase the volume level and reach the default setting level which may exceed 85dB. Press the button to accept the warning and the user can continue to increase the volume level until the maximum level is reached. 4. Play Next/Previous Music 4.1 In music playing mode; 4.2 Press the button to play next track. 4.3 Press the button to play previous track. 5. Play Fast-Forward/Fast-Backward 5.1 Press and hold the button to enter fast-forward mode. 5.2 Press and hold the button to enter fast-backward mode. 6. Shuffle 6.1 During playback, press the button twice to activate the shuffle and hear two beeps signal to confirm. 6.2 Press the button twice again to deactivate the shuffle and hear tone beep signal to confirm. G. LED Light Function Playing mode : Blue light blinking once per second. Pause mode : Blue light constant bright. PC connecting mode : Blue light blinking fast when data is transferring. : Red light blinking once per second. (In charging) In charging Mode : Red light blinking once per second. (In charging) Charging completed : Red light constant bright. Low battery < 20% : Red light blinking. H. Reset the Player In some circumstances, the device may encounter technical issues during use. This device has been designed with a built-in a mini tact switch through a hole which located on the right side of the device. To Reset: 1. Use a 0.8 ~ 1 mm stick or similar object (like a toothpick), and carefully insert into the reset hole. 2. Apply a small bit of force and you will get a click sound and feeling from the switch. The device is reset and will restart. Important: Do not reset the device if it is proper working. 6

7 I. Troubleshooting Player cannot turn ON Check whether the battery has enough energy. Charge the battery. No sound is heard Check whether the Volume is set to minimum and connect the headphone plug firmly. Check whether the headphone plug is dirty. Corrupted WMA/MP3 files may make a static noise and the sound may cut off. Make sure that the music files are not corrupted. Check whether music file formats are Upload/Download of music files fail. supported. Check whether the player s USB connector is connected with the computer properly. Check whether the driver is installed correctly. Check whether the player s memory is full. J. Technical Specifications Dimension 50 mm (H) x 33 mm (W) x 17 mm (D) Weight 14.5g (approximate) PC Connection USB 2.0 (High Speed) Earphone Impedance 32 Ohm Memory Card Slot For Micro SD Memory Card (Support up to 32GB and 64GB possible) Power Source DC Input: DC 5V 500mA Rechargeable Battery Lithium-Polymer: 3.7V 110mAh Playing Time: 5 ~ 6 hours Supports Music Format MP3 32kbps - 320kbps WMA 32kbps - 320kbps Earphone Output 2mW x 2 channels (at 32 Audio Freq. Response 20Hz - 20,000Hz Ohm) SNR 80dB Operation Temperature 0 C - 40 C Operation Systems Windows 2000/XP/Vista/Win7/Win8/Win10 MAC 9.2 or above K. Disclaimer Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items 7

described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual. L.

To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries.

8 described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual. L. Recycling M. CE Marking This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive). Products with the CE marking comply with the EMC Directive (2014/30/EU) and the Low Voltage Directive (2014/35/EU) issued by the Commission of the European Community. N. Service For more information and helpdesk support, please visit Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands. 8

USER S MANUAL XEMIO-760 BT MP3 / MP4 player with Bluetooth

USER S MANUAL XEMIO-760 BT MP3 / MP4 player with Bluetooth For more information: www.lenco.com 1 Cautions Do not place naked flames, such as lighted candles on or near the product. Do not place objects