MTPX Plus Series MTP Twisted Pair Matrix Switchers with IP Link for RGBHV, Video, Audio, and RS-232

Transcription

1 MTP Twisted Pair Matrix Switchers with IP Link for Series Features Six models in sizes from 8x16 to 32x32 Dynamic skew equalization Adjustments are stored in memory for each input and output, maintaining RGB color alignment at all times Local RS-232 insertion ports Eight or sixteen RS-232 input ports eliminate the need for control system wiring to remote displays Video level and peaking compensation on each input Actively compensates for input signal attenuation for various cable lengths, resulting in a brighter and sharper image Switchable video pre-peaking on 50% of the outputs Provides additional compensation for optimal performance on the longest cable runs Local high resolution video inputs and outputs Accept input from local video sources without the need for additional transmitters and receivers Local audio inputs and outputs Support stereo audio sources and output unbalanced line level mono audio for processing or distribution input gain and attenuation Eliminates noticeable differences in volume when switching between sources Local audio output volume adjustment and muting Eliminates the need for preamplifiers in many A/V systems IP Link Ethernet connectivity Enables Web-based remote management, monitoring, and control Enhanced QS-FPC - QuickSwitch Front Panel Controller A separate button for each input and output enables simple, intuitive operation Tri-color, backlit buttons accept custom window labels Clear plastic backlit buttons can be custom-labeled for easy identification. Buttons illuminate red, green, or amber, depending on function, for ease-of-use in low-light environments Compatible with MTP Series products Works with all MTP Series transmitters and receivers, including the MTP U Series Universal Mini Twisted Pair Receivers Front panel security lockout Restricts access in unsecured environments View I/O mode Easily view which inputs and outputs are actively connected Global presets Allow you to set up I/O configurations and store them in memory for future use I/O grouping Allows the matrix switcher to be virtually divided into smaller sub-switchers Rooming All models can be programmed to group selected outputs into specific rooms, each with its own set of unique presets RS-232 and RS-422 control Enables switcher control and configuration via the Windows-based control program, or integration into a third-party control system. Front panel configuration port For convenient configuration access after installation is complete Rack-mountable metal enclosure All MTPX Plus Series twisted pair matrix switchers are housed in either a 2U or 3U, full rack-width metal enclosure Internal universal power supply The VAC, 50/60 Hz, international power supply provides worldwide power compatibility DESCRIPTION The MTPX Plus Series Twisted Pair Matrix Switchers represent the next generation of twisted pair integration. Local video and audio inputs and outputs enable direct connection of equipment that is located within the same rack as the MTPX Plus Matrix, greatly simplifying system complexity by eliminating additional MTP transmitters and receivers. The MTPX Plus Series also provides dynamic skew equalization on all inputs and outputs. This industry first innovation ensures that CAT 5-type cable skew is eliminated, no matter which combination of input/output cable lengths are selected. Yet another innovative feature, local RS-232 insertion ports, allows a control system located near the MTPX Plus to connect to and control remote displays over the same CAT 5-type output cable that carries the A/V signal. When paired with MTP U Series Universal Receivers, MTPX Series Twisted Pair Matrix Switchers allow composite video, S-video, component video, and VGA, along with audio or RS-232 control signals, to be sent over a single CAT 5-type cable and output on the appropriate connector at the display. Using one cable for all signal types simplifies system wiring and uses only a single matrix switcher output and MTP U Series receiver per display. Additional features include switchable pre-peaking on a number of the outputs to drive signals long distances, audio input gain and attenuation to balance audio levels, output volume control for the local outputs, and IP Link Ethernet connectivity. The powerful feature set in the MTPX Plus Series Twisted Pair Matrix Switchers enables integrators to greatly reduce installation time and costs associated with rack space, cabling, and installation, when compared to traditional twisted pair matrix switching. Local Video and Inputs and Outputs In addition to the RJ-45 inputs and outputs, MTPX Plus Series matrix switchers include local inputs and outputs for video and audio. Local video and audio inputs and outputs enable direct connection of equipment that is located within the same rack as the MTPX Matrix Switcher. This greatly simplifies system complexity by eliminating the need for additional MTP Series transmitters and receivers. The result is significant cost savings on rack space, equipment, cabling, and power requirements. 99

2 Y MTPX Plus Series Description (continued) Dynamic Skew Compensation The MTPX Plus Series features integrated skew delay equalization on all inputs and outputs. This ground-breaking methodology enables the necessary skew compensation to be configured during installation for each input/output combination, which is then applied automatically during operation. Since the skew compensation is in the matrix switcher, no skew compensation is required in the receivers. Level and Peaking Compensation MTPX Plus Series twisted pair matrix switchers feature individual level and peaking adjustments on each input. As with skew compensation, level and peaking adjustments are made for each input during installation and stored in memory. When an input is selected, the level and peaking compensation is automatically recalled from memory and applied instantly, resulting in an optimized image quality for every cable length. Local RS-232 Insertion Ports MTPX Plus Series twisted pair matrix switchers feature local RS-232 insertion ports, which allow direct insertion of bidirectional serial control signals into any UTP output. These insertion ports eliminate the need for additional control infrastructure for remote displays. Also, adding RS-232 signals to the UTP output extends serial control beyond the recommended 100-foot distance. IP Link Ethernet Connectivity MTPX Plus Series matrix switchers are also equipped with IP Link, a high performance intelligent network integration solution specifically engineered to meet the needs of professional A/V environments. IP Link is built around an integrated high performance Web server that features global compatibility with industry standard Ethernet communication protocols, multiuser support, and GlobalViewer, a free Web-based A/V resource management and remote control Web application. Video Output Pre-Peaking In the MTPX Plus Series, 50% of the UTP outputs feature switchable pre-peaking for optimizing the video signal when needed. For example, the MTPX Plus 816 features eight UTP outputs with pre-peaking capability, while on the MTPX Plus 3232, sixteen of the UTP outputs feature the pre-peaking capability. The pre-peaking circuit provides additional compensation, which optimizes the output video signal for longer cable runs. Rack Mounted PC Control System TCP/IP Network MTP U R RSA SEQ Universal Receiver RS-232 OUTPUTS B-Y VID Y/C MONO AUDIO 1 2 RS 232 R-Y INPUT RGB S-video MTP U R A Universal Receiver MTP U R A OUTPUTS VID Y/C MONO AUDIO 1 2 RGBHV Flat Panel Display MTPX Plus 3232 Twisted Pair Matrix Switcher INPUT RGB S-video RGBHV MTP T SV A INPUT S-VIDEO OUTPUT MTP T SV A AUDIO INPUT MTP T 15HD A MONITOR MTP T 15HD A OUTPUT SI 28 Surface-mount Speakers XPA 1002 Power Amplifier AUDIO IN COMPUTER IN MTP T 15HD A D Projector Laptop DVD PC 100 usa west / FAX usa east / FAX Electronics. All rights reserved. Pricing and specifications may change without notice.

3 MTPX Plus 816 8x16 MTP Twisted Pair Matrix Switcher with IP Link for MTPX Plus 816 8x MTPX Plus x8 MTP Twisted Pair Matrix Switcher with IP Link for Four RS-232 insertion ports MTPX Plus x MTPX Plus x16 MTP Twisted Pair Matrix Switcher with IP Link for MTPX Plus x MTPX Plus x32 MTP Twisted Pair Matrix Switcher with IP Link for Sixteen RS-232 insertion ports MTPX Plus x

4 MTPX Plus x16 MTP Twisted Pair Matrix Switcher with IP Link for MTPX Plus x MTPX Plus x32 MTP Twisted Pair Matrix Switcher with IP Link for Sixteen RS-232 insertion ports MTPX Plus x usa west / FAX usa east / FAX Electronics. All rights reserved. Pricing and specifications may change without notice.

5 SPECIFICATIONS Video Routing MTPX Plus x 16 matrix, 3 x 1 local MTPX Plus x 8 matrix, 3 x 1 local MTPX Plus x 16 matrix, 3 x 1 local MTPX Plus x 32 matrix, 6 x 2 local MTPX Plus x 16 matrix, 6 x 2 local MTPX Plus x 32 matrix, 6 x 2 local Gain... Unity Crosstalk 816, 168, 1616 models MHz, MHz, MHz, MHz 1632, 3216, 3232 models MHz, MHz, MHz, 100 MHz Switching speed ms (max.) Video input local Number/signal type... 3 or 6 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level), S-video, composite video Connectors... 3 or 6 female 15-pin HD Nominal level Vp-p for RGB Minimum/maximum levels V to 1.45 Vp-p with no offset at unity gain Impedance ohms Horizontal frequency khz to 130 khz Vertical frequency Hz to 150 Hz Return loss... <-30 5 MHz DC offset (max. allowable) mv Video input main(see transmitters' output specifications) Video output local Number/signal type... 1 or 2 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level sync), S-video, composite video Connectors... 1 or 2 female 15-pin HD Nominal level Vp-p for RGB Impedance ohms Return loss... <-30 5 MHz DC offset... <±20 mv with input at 0 offset Video output main(see receivers' input specifications) Sync local inputs and outputs only Input type... RGBHV, RGBS, RGsB, RsGsBs Output type... See receiver specifications (see specifications on Web site). Input level V to 5.5 Vp-p, unterminated; 4.0 V to 5.0 Vp-p normal Output level... See receiver specifications (see specifications on Web site). Input impedance ohms ± 5% Output impedance ohms Max. input voltage Vp-p Max. propagation delay ns total Max. rise/fall time... 4 ns Polarity... Positive or negative Routing MTPX Plus x 16 mono matrix, 3 x 4 local MTPX Plus x 8 mono matrix, 3 x 4 local MTPX Plus x 16 mono matrix, 3 x 4 local MTPX Plus x 32 mono matrix, 6 x 8 local MTPX Plus x 16 mono matrix, 6 x 8 local MTPX Plus x 32 mono matrix, 6 x 8 local Gain (local inputs and outputs) Unbalanced output: 0 db; balanced output: +6 db Frequency response Hz to 20 khz, ±1 db THD + Noise... 1 khz at nominal level S/N... >70 db at maximum output (unweighted) CMRR... >43 20 Hz to 20 khz input local Number/signal type... 3 or 6 stereo, balanced/unbalanced Connectors... (3) or (6) 3.5 mm captive screw connectors, 5 pole Impedance... >10k ohms unbalanced Nominal level dbu (1.23 Vrms), -10 dbv (316 mvrms) Maximum level dbu, (unbalanced) at 1% THD+N NOTE: 0 dbu = Vrms, 0 dbv = 1 Vrms, 0 dbv 2 dbu input main(see transmitters' output specifications) output local Number/signal type... 4 or 8 dual mono, balanced/unbalanced Connectors... (4) or (8) 3.5 mm captive screw connectors, 5 pole Impedance ohms unbalanced, 100 ohms balanced Gain error... ±1 db channel to channel Maximum level (Hi-Z) dbu, balanced or unbalanced at 1% THD+N Maximum level (600 ohm) dbm, balanced or unbalanced at 1% THD+N output main(see receivers' input specifications) Control/remote switcher host control Serial host control ports... 1 RS-232 or RS-422, rear panel 9-pin female D connector 1 RS-232 front panel 2.5 mm mini stereo jack Baud rate and protocol baud (default), 19200, 38400, and (adjustable); 8 data bits; 1 stop bit; no parity Serial control pin configurations 9-pin female D connector... RS-232: 2 = TX, 3 = RX, 5 = GND RS-422: 2 = TX-, 3 = RX-, 5 = GND, 7 = RX+, 8 = TX+ Mini stereo jack... Tip = TX, ring = RX, sleeve = GND Ethernet control port... 1 RJ-45 female connector Ethernet data rate... 10/100Base-T, half/full duplex with autodetect Ethernet protocol... ARP, DHCP, ICMP (ping), TCP/IP, UDP, Telnet, HTTP, SMTP Default settings... Link speed and duplex level = autodetected IP address = , Subnet mask = , Gateway = , DHCP = off Web server... Up to 200 simultaneous sessions 16 MB nonvolatile user memory Program control... 's control/configuration program for Windows 's Simple Instruction Set (SIS ) Microsoft Internet Explorer version 6 or higher, Telnet Control/remote external device(pass-through, unidirectional, or bidirectional) Serial control ports... RS-232, 3.5 mm captive screw connectors, 3 pole 3232 and 1632 models connectors 3216, 1616, and 816 models... 8 connectors 168 models... 4 connectors Baud rate and protocol... Up to baud, 9600 baud (default); 5-8 data bits; 1 or 2 stop bits; odd, even, or no parity; XON, XOFF, or no flow control NOTE: Protocol is mirrored between the switcher and the receiver. Serial control pin configurations 1 = TX, 2 = RX, 3 = GND General Recommended cable type... CAT 5/5E/6/7 (shielded or unshielded) Power VAC to 240 VAC, 50/60 Hz, internal 1632, 3216, 3232 models watts 816, 168, 1616 models watts Temperature/humidity... Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, noncondensing Cooling... Fan, left to right (as viewed from the front panel) Rack mount... Yes Enclosure type... Metal Enclosure dimensions 1632, 3216, 3232 models " H x 17.0" W x 9.4" D (3U high, full rack wide) (13.3 cm H x 43.1 cm W x 23.9 cm D) (Depth excludes connectors. Width excludes rack ears.) 816, 168, 1616 models " H x 17.0" W x 9.4" D (2U high, full rack wide) (8.9 cm H x 43.1 cm W x 23.9 cm D) (Depth excludes connectors. Width excludes rack ears.) Product weight 1632, 3216, 3232 models lbs (7.3 kg) 816, 168, 1616 models lbs (3.9 kg) Shipping weight 1632, 3216, 3232 models lbs (ll.8 kg) 816, 168, 1616 models lbs (9 kg) DIM weight (International) 1632, 3216, 3232 models lbs (11.8 kg) 816, 168, 1616 models lbs (9 kg) Vibration... ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety... CE, C-tick, CUL, UL EMI/EMC... CE, C-tick, FCC Class A, ICES, VCCI Environmental... Complies with the appropriate requirements of WEEE. MTBF... 30,000 hours Warranty... 3 years parts and labor NOTE: All nominal levels are at ±10%. NOTE: Specifications are subject to change without notice. Note: For complete specifications, please go to 103