H2C Motor Timers will be Discontinued March 2013; Replace with H3CR-A8E Solid-state Timer
|
|
- Anna Hoover
- 5 years ago
- Views:
Transcription
1 NO: TI-042M PRODUCT: H2C Motor Timer [MELA] DATE: March 2012 TYPE: Discontinuation Notice H2C Motor Timers will be Discontinued March 2013; Replace with H3CR-A8E Solid-state Timer H2C Motor Timer H3CR-A8E Solid-state Timer Digital Timer Affected Products: H2C-8, H2C, H2C-S - H2C Motor Timers H2C-8R, H2C-R, H2C-SR Recommended Replacement Products: H3CR-A8E - H3CR Solid-state Timer - H5CZ Digital Timer Effective Date: March 1, Last Order for Affected Products Details: Due to low sales volume, the H2C Motor Timers are being migrated to H3CR-A Solid-state Timers and H5CZ Digital Timers. Omron does not offer an exact replacement for this motor timer. Key Differences is a motor timer. No exact recommended replacement of the motor timer exists. The recommended replacements are solid-state timer and digital timer. During a power failure, the NC control outputs of Model H3CR and H5CZ are always ON, and NO control outputs are OFF. H3CR has no present value display. If present value display is needed, select H5CZ. Do not replace the existing H2C with the recommended replacements without confirming specifications. Refer to the detailed specifications on the following pages. Never apply rated supply voltage to Start signal and Reset inputs of H5CZ. It may destroy the product. H5CZ s Start signal and Reset inputs are counterparts of the power and clutch input of the H2C/-R/-8R. The power and clutch needs rated supply voltage input, while the Start signal and Reset need non-voltage input. has no Instantaneous contacts. 1
2 Product Discontinuation and Recommended Replacement Product discontinuation Recommended replacement Product discontinuation Recommended replacement H2C-8 AC24 B H3CR-A8E 24-48AC/DC H2C AC24 A H5CZ-L8D H2C-8 AC48 C H2C AC24 B H2C-8 AC100/110 A H3CR-A8E 100- H2C AC48 B H2C-8 AC100/110 B 240AC/ DC H2C AC100/110 B H5CZ-L8 H2C-8 AC100/110 C H2C AC110 B H2C-8 AC110 A H2C AC110 C H2C-8 AC110 B H2C AC120 A H2C-8 AC110 C H2C AC120 B H2C-8 AC115 C H2C AC200/220 A H2C-8 AC120 A H2C AC200/220 B H2C-8 AC120 B H2C AC200/220 C H2C-8 AC120 C H2C AC220 A H2C-8 AC200/220 A H2C AC220 B H2C-8 AC200/220 B H2C AC220 C H2C-8 AC200/220 C H2C AC240 A H2C-8 AC220 A H2C AC240 B H2C-8 AC220 B H2C-R-S AC24 A H5CZ-L8D H2C-8 AC220 C H2C-R-S AC24 B H2C-8 AC240 A H2C-R-S AC24 C H2C-8 AC240 B H2C-R-S AC110 A H5CZ-L8 H2C-8 AC240 C H2C-R-S AC110 B H2C-8R AC24 A H5CZ-L8D H2C-R-S AC110 C H2C-8R AC100/110 A H5CZ-L8 H2C-R-S AC220 A H2C-8R AC100/110 B H2C-R-S AC220 B H2C-8R AC100/110 C H2C-R-S AC220 C H2C-8R AC110 A H2C-R-S AC240 A H2C-8R AC110 B H2C-R-S AC240 B H2C-8R AC110 C H2C-S AC24 A H5CZ-L8D H2C-8R AC120 A H2C-S AC24 B H2C-8R AC120 B H2C-S AC24 C H2C-8R AC120 C H2C-S AC48 A H2C-8R AC200/220 A H2C-S AC48 B H2C-8R AC200/220 B H2C-S AC48 C H2C-8R AC200/220 C H2C-S AC110 A H5CZ-L8 H2C-8R AC220 A H2C-S AC110 B H2C-8R AC220 B H2C-S AC110 C H2C-8R AC220 C H2C-S AC220 A H2C-8R AC230 C H2C-S AC220 B H2C-8R AC240 A H2C-S AC220 C H2C-8R AC240 B H2C-S AC240 A H2C-8R AC240 C H2C-S AC240 B H2C-R AC120 B H5CZ-L8 H2C-R AC120 C H2C-R AC200/220 A H2C-R AC220 A H2C-R AC220 B H2C-R AC240 B 2
3 Body color Case color Light gray (Munsell 5Y7/1) Model H3CR-A8E Case color Light gray (Munsell 5Y7/1) Model Front panel color Light gray (Munsell 5Y7/1) Wire connection H2C-8 H3CR-A8E SM * Clutch coil Power supply H2C-8R SM Clutch coil Power and clutch Power supply 3
4 Wire connection H2C/-R/-S/-R-S NOTE: has no Instantaneous contacts. Mounting dimensions H2C-8 H3CR-A8E 4
5 Mounting dimensions H2C-8R H2C/-R/-S/-R-S 5
6 Dimensions H2C/-8/-8R/-S/-R/-R-S H3CR-A8E Characteristics Item Rated Supply Voltage Operating Voltage Range Power Consumption External Connections Connecting Socket (order separately) Reset Voltage 24, 48, 100, 110, 115, 120, 200, 220, or 240 VAC 85% to 110% of rated supply voltage 4.2 VA max. (3.96 W max.) H2C-8/-8R: 8-pin socket H2C/-R/-S/-R-S: 11-pin socket 8-pin : P2CF-08, PF085A, P3G-08, PL08 11-pin: P2CF-11, P3GA-11 10% max. of rated supply voltage Model H3CR-A8E 100 to 240 VAC (50/60 Hz) / 100 to 125 VDC, 24 to 48 VAC/VDC 85% to 110% of rated supply voltage (90% to 110% at 12 VDC) 100 to 240 VAC/100 to 125 VDC (When at 240 VAC, 60 Hz) Relay ON/OFF: approx. 2 VA (0.9 W) 24 to 48 VAC/VDC (When at 24 VDC) Relay ON/OFF: approx. 0.9 W 8-pin socket P2CF-08, P2CF-08-E, PF085A, P3G-08, PL08 Model H5CZ-L8/L8D 100 to 240 VAC 50/60 Hz 12 to 24 VDC/24 VAC (50/60 Hz) 85% to 110% of rated supply voltage (90% to 110% at 12 to 24 VDC) Approx. 6.2 VA at 100 to 240 VAC, Approx. 5.1 VA/2.4 W at 24 VAC/12 to 24 VDC P2CF-08, P2CF-08-E, P3G-08 6
7 Characteristics Item Time Ranges Inputs Control Outputs Present Value Display Operating Temperature Range Storage Temperature Range Operating Humidity Range A B C 1.25 to 30 s 7.5 to 3 min 1.25 to 30 min 7.5 min to 3 h 1.25 h to 30 h 0.2 to 6 s 2 to 60 s 0.2 to 6 min 2 to 60 min 0.2 to 6 h 0.5 to 12 s 5 to 120 s 0.5 to 12 min 5 to 120 min 0.5 to 12 h (motor and clutch) 24, 48, 100, 110, 115, 120, 200, 220, or 240 VAC 6 A at 250 VAC, resistive load (cosφ = 1) Model H3CR-A8E 0.05 to 1.2 s 0.3 to 3 s 1.2 to 12 s 3 to 30 s 0.12 to 1.2 min 0.3 to 3 min 1.2 to 12 min 3 to 30 min 0.12 to 1.2 h 0.3 to 3 h 1.2 to 12 h 3 to 30 h 0.12 to 1.2 (x 10 h) 0.3 to 3 (x 10 h) 1.2 to 12 (x 10 h) 3 to 30 (x 10 h) None Time limit contacts: 5 A at 250 VAC/30 VDC, 0.15 A at 125 VDC, resistive load (cosφ = 1) Instantaneous contact: 5 A at 250 VAC/30 VDC, 0.15 A at 125 VDC, resistive load (cosφ = 1) Model H5CZ-L8/L8D to s 0.01 to s 0.1 to s 1 to 9999 s 1 s to 99 min 59 s 0.1 to min 1 to 9999 min 1 min to 99 h 59 min 0.1 h to h 1 h to 9999 h [Signal, Reset] No-voltage Input ON impedance: 1 kω max. (Leakage current: 12 ma when 0 Ω) ON residual voltage: 3 V max. OFF impedance: 100 kω min 5 A at 250 VAC/30 VDC, resistive load (cos =1) Minimum applied load: 10 ma at 5 VDC (failure level: P, reference value) Equipped with moving LCD; Present value: None pointer 10-mm-high characters -10 C to 50 C (with no -10 C to 55 C (with no -10 to 55 C (-10 to 50 C if icing) icing) counters are mounted side by side) (with no icing or condensation) 25 C to 65 C (with no 25 C to 65 C (with no -25 to 70 C (with no icing or condensation) icing) icing) 45% to 85% 35% to 85% 25% to 85% 7
8 Operation ratings Timing Chart H2C-8 Timing Chart H3CR-A8E Mode A: On-delay H2C-8R Mode A-3: Power ON delay 2 H2C-R/-R-S NOTE: has no Instantaneous contacts. H2C/H2C-S H5CZ/-L8/-L8D Mode A-1: Signal ON delay 2 NOTE: has no Instantaneous contacts. 8
9 Operation methods How to Change the Time Range Change the time range by turning the knob clockwise using a flatblade screwdriver or an Allen wrench. There are five possible settings. The selected time is displayed in the time range display window above the knob. Model H3CR-A8E Selection of Time Unit and Time Range The desired time unit (sec, min, hrs, or 10h) is displayed in the window below the time setting knob by turning the time unit selector located at the lower right corner of the front panel. A time range (1.2, 3, 12, or 30) is selected with the time range selector at the lower left corner of the front panel, and the selected time range appears (in the window at the lower right part) within the plastic frame of the time setting knob. Model Operation and Ssettings Operation is done by the Up/Down Keys on the front panel. How to Change the Functions Change the timer function in the Function setting mode. Selection of Operating Mode Turn the operating mode selector with a screwdriver until the desired operating mode (A8E: A, B2, E or J) appears in the display window located above the selector. Key Protect When the key-protect switch is set to ON, it is possible to prevent setting errors by prohibiting the use of certain operation keys by specifying the key protect level (KP-1 to KP-7). The key protect indicator is lit while the key-protect switch is set to ON. 9
H3CR-F H3CR-F8 H3CR-F-300 H3CR-F8-300
R Solid-State Repeat-Cycle Timer 1/1 DIN Solid-State Repeat-Cycle Timer Wide power supply ranges of 100 to 240 VAC 24 VAC/VDC, 12VDC Combinations of independent long or short / time settings are possible
More informationH3CR-H. Solid-state Power OFF-delay Timer. Ordering Information. DIN 48 x 48-mm Solid-state Power OFF-delay Timer
Solid-state Power OFF-delay Timer H3CR-H DIN 48 x 48-mm Solid-state Power OFF-delay Timer Long power OFF-delay times; S-series: up to 12 seconds, M-series: up to 12 minutes. Models with forced-reset input
More informationModel Number Structure
Solid-state Twin Timers CSM DS_E_1_5 DIN 48 48-mm Twin Timers Wide power supply ranges of 100 to 240 VAC and 48 to 125 VDC respectively. ON- and OFF-times can be set independently and so combinations of
More informationProduct Discontinuation Notices. Discontinuation Notice of open-circuit time delay relay RD2P-30
PRODUCT NEWS Product Discontinuation Notices March 1, 2012 Timers No. 2012082E Discontinuation Notice of open-circuit time delay relay RD2P-30 Product Discontinuation Open-circuit time delay relay Recommended
More informationH3CA-8H-AC/100/110/120
Solid-State Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay, Repeat
More informationModel Number Structure
Solid-state Twin Timers CSM DS_E_1_2 DIN 48 48-mm Twin Timers Wide power supply ranges of 100 to 240 VAC and 48 to 125 VDC respectively. - and -times can be set independently and so combinations of long
More informationSolid-state Timer. Mounting system contact t contact. t Surface mounting/ track mounting
Solid-state Timer DIN-sized (48 x 48, 45 x 75 mm) Timer with Digital Setting and LCD Display Dual power supplies for free AC/DC. Eight operation modes selectable with one unit. Any desired time can be
More informationConforms to VDE0435/2021 C/250, VDE0110, VDE0106/P100 Conforms to EN , pren
Solid-state Power OFF-delay Timer II DIN 22.5-mm Solid-state Power OFF-delay Timer High immunity to invertor noise. Long power OFF-delay times; S-series: up to 12 seconds, L-series: up to 120 seconds.
More informationTime-limit operation/ self-resetting DPDT --- H3M H3M with Y92F-40 adapter SPDT SPDT H3M-H H3M-H with Y92F-40 adapter
Solid-state Timer Solid-state Timer with Variable Time Ranges Four time ranges are selectable per timer unit. Wide timing range of 0.05 second to 30 hours can be covered by a combination of five timer
More informationDPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2
Safety Relay Unit Ultra Slim Safety Relay Unit 17.5 mm wide models available with 2 or 3 poles. 22.5 mm wide 3 pole models also available EN Standards (TÜV approval) DIN-track mounting possible Ordering
More informationSolid-State Counter/Timer
Solid-State Counter/Timer 1/16 DIN, Easy-to-Operate Combination Counter and Timer Operation selectable as preset counter or timer 6-digit LCD display Present Value: 8 mm (0.32 in) Set Value: 4 mm (0.16
More informationSolid-state Timer H3FA. Model Number Structure. DIP Model Timer for PC Board Use Provides Contact and Solid-state Output
Solid-state Timer H3FA Please read and understand this catalog before purchasing the products. Please consult OMRON representative if you have any questions or comments. Refer to Warranty and Application
More informationModel Selection Guide for Timers. H3 and H5 Series
H3 and H5 Series Table of Contents Basic Selection Information for Timers Timer s Advantage 3 Basic Configuration of a Timer 4 Basic Operation of a Timer 5 Model Selection Guide for Timers Recommended
More informationTIME DELAY RELAYS Product Summary
Product Summary Macromatic offers a wide variety of time delay relays and accessories. Each one has different features and operating characteristics, allowing you to choose the exact product to meet your
More informationCommon to all H3CR. Basic Setting. Setting of Selectors. Selection of Operating Mode. Selection of Time Unit and Time Range. Common to all H3CR 1
Common to all H3CR Note: The undermentioned is common for all H3CR models. Basic Setting Setting of Selectors The s can be turned clockwise and counterclockwise to select the desired time unit, time range,
More informationSPST-NO SPDT DPST-NO DPDT
Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508
More informationSafety Relay Unit (I/O Unit Type)
Safety Relay Unit (I/O Unit Type) CQM1-SF200/ CS1W-SF200 Same Dimensions as I/O Unit Less Installation Space and Wiring Required Safety Relay Unit that can be used as an I/O Unit for OMRON s CQM1H and
More informationModel Number Structure
Motor Timer CSM DS_E_2_2 DIN-sized 48 x 48 Motor Timer with Simple Operation for Switching Time Specifications Three Motor Timers cover the wide time range of 6 s to 30 h with easy operation from the operation
More informationDigital Timer. Ordering Information. 1/16 DIN, Quartz Timer with Four-Digit LED Display
Digital Timer 1/16 DIN, Quartz Timer with Four-Digit LED Display Five wide ranges to choose from Wide-range AC or DC supply voltages Elapsed time (UP) or time remaining (DOWN) display available Selectable
More informationSolid-state Counter. Power supply Output No voltage input (short/open circuit) Voltage input (high/low voltage) 30 cps 1 kcps 30 cps 1 kcps AC
Solid-state er DIN-sized (48 x 48 mm) Solid-state er with Timer Functions Easier operation due to improved front panel er and timer function modes switch-selectable Large easy-to-read 6-digit LCD Non-significant
More informationTime Counters mini "h", DC Version
Type 633-DC Time Counters mini "h", DC Version Type 633.0 Type 633.7 Type 633.8 High shock resistance Miniature dimensions Electrical connections in standard grid Suitable for PCB mounting Machine-solderable
More informationDigital Timer H5CZ. Easy to Use and Easy to Read. Features. Basic Features Better Readability Character Height of 10 mm with a Wide Viewing Angle.
New Product Digital Timer H5CZ Easy to Use and Easy to Read. Basic Features Character height of 1 mm for better readability. Operation is simplified by the Up/Down Keys for each digit on 4-digit. Safety
More informationThis document describes the features and functional specifications of the ECONO3 air conditioner controller.
TITLE : FUNCTIONAL SPECIFICATION FOR ECONO3 COOL REV : 01 DATE : MARCH 13, 2001. 1. INTRODUCTION 1.1 Scope of Document This document describes the features and functional specifications of the ECONO3 air
More informationSelf-Powered Counters H7EC
Self-Powered Counters Subminiature Count Totalizers Require No External Power Supply Subminiature 8 x mm (1.89 x.9 in) Improved noise immunity Screw terminal and wire-wrap types available AC, DC, and no-voltage
More informationSafety Monitoring Relays
Safety Monitoring Relays G9SA G9SA Safety Relay Unit Four kinds of 45-mm wide units are available: A 3-pole model, a 5-pole model, and models with 3 poles and 2 OFF-delay poles, as well as a two-hand controller.
More informationProcess displays For current and voltage
Features Voltage input TRMS-AC/DC up to 600 V Current input AC/DC 1 A, 5 A and shunt (precision resistor) 60 or 100 mv With 2 or 4 limits Display range can be linearised Min, Max, Hold functions 4 20 ma
More informationMain contacts Auxiliary contact Number of input channels Rated voltage Model Category 24 VAC/VDC 3PST-NO SPST-NC 1 channel or 2 channels possible
Safety Relay Unit Four kinds of -mm wide Units are available: A -safety contact model, a -safety contact model, and models with safety contacts and OFF-delay safety contacts. Also available are 7.-mm wide
More informationMonitoring Relays can be used to monitor 3-phase power supplies with 3 or 4 wires simply by changing DIP switch settings.
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 032 Ph: +91 44 4353 8888 Fax: 044 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Three-phase Voltage Relay
More informationDigital Timer Ultra-compact Timer Provides Advanced Functions and Security Settings. Features
New Product Digital Timer H5CX-@-N Ultra-compact Timer Provides Advanced Functions and Security Settings. Basic Features Short body with depth of only 59 mm (for 24-VAC / 12 to 24-VDC Models with Screw
More informationON-delay operation 8-pin round socket DPDT --- H3CA-8 H3CA-8 SPDT SPDT H3CA-8H H3CA-8H
Solid-state Timer CSM DS_E_3_1 DIN-sized (48 x 48, 45 x 75 mm) Timer with Digital Setting and LCD Display Dual power supplies for free AC/DC. Eight operation modes selectable with one unit. Any desired
More informationMultifunction Counter/Tachometer H7CX Series
Multifunction Counter/Tachometer H7CX Series Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer
More informationSolid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
More informationNO: PH-185 PRODUCT: E3JK Photoelectric Sensors DATE: May 2014 TYPE: Discontinuation Notice
NO: PH-185 PRODUCT: E3JK Photoelectric Sensors DATE: May 2014 TYPE: Discontinuation Notice E3JK Universal AC/DC Supply Voltage Photoelectric Sensors to be Discontinued February 2015; Replace with E3JM
More informationMeasuring and Monitoring Relays
Measuring and Monitoring Relays K8AB Series/61F-D21T Industry First! Two SPDT Outputs Available in New Models DIN Sized at 22.5 mm Seven slim models featuring a variety of innovative new functions. Single-phase
More informationMulti Voltage Options. Multi Voltage Options 110VAC + 24VAC/DC 230VAC + 24VAC/DC 24VAC/DC 110VAC 230VAC
DIN Timers TD 22.5mm DIN rail mounting Electronic Timers AC/DC coil operation Multi-time range Multi-function, On-delay, Off-delay and Star/Delta versions Voltage range selectable Marking plate cover Y
More information02/11/2015
24 x 48 Hour CTR24 non-backlit model Part number 87622162 Display : 8-digit LCD, height 8 mm Built-in module for voltage inputs 10 260 VAC/DC () 4 timing ranges : 99,999.99 hrs - 99,999.59 hrs - 999,999.9
More informationGT3F Series True OFF Delay Timers
TF Series TF Series True OFF Delay Key features of the TF series include: Mountable in sockets or flush panel True power OFF-delay up to 10 minutes No external control switch necessary Available with reset
More informationG9SA. Ordering Information. Safety Relay Unit. The G9SA Series Offers a Complete Line of Compact Units. H Several types of 45-mm wide Units are
Safety Relay Unit The G9SA Series Offers a Complete Line of Compact Units H Several types of -mm wide Units are available: a -pole model, a -pole model, models with poles and OFF-delay poles H 7.-mm wide
More informationON-delay operation 8-pin round socket DPDT --- H3CA-8 H3CA-8 SPDT SPDT H3CA-8H H3CA-8H
Solid-state Timer CSM DS_E_4_2 DIN-sized (48 x 48, 45 x 75 mm) Timer with Digital Setting and LCD Display Dual power supplies for free AC/DC. Eight operation modes selectable with one unit. Any desired
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_2_ Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationProduct discontinuation. Notices
PRODUCT NEWS Product Discontinuation Notices Photoelectric Sensors Issue Date February 3, 2014 No. 2014E001C Discontinuation Notice of AC/DC free type E3JK series (For America area only). Product Discontinuation
More informationDespite its ultra-slim design, a CPM2C system can provide up to 192 I/O points!
Despite its ultra-slim design, a CPM2C system can provide up to 192 I/O! Model Numbers Expansion I/O Units Name CPM1A-8ET 8 input Transistor outputs (sinking) CPM1A-8ED 8 DC inputs CPM1A-8ER 8 relay outputs
More informationTIME DELAY RELAYS Product Summary
Product Summary Macromatic offers a wide variety of time delay relays and accessories. Each one has different features and operating characteristics, allowing you to choose the exact product to meet your
More informationTIME DELAY RELAYS TR-6 SERIES Time Ranger TM Programmable Multi-Range Plug-in Off Delay, Single Shot & Watchdog
TR-6 SERIES Time Ranger TM Programmable Multi-Range Plug-in Off Delay, Single Shot & Watchdog INPUT VOLTAGE PRODUCT WIRING/ FUNCTION 50/60Hz. NUMBER SOCKETS OFF 120V AC/DC TR-61622 11 PIN OCTAL Control
More informationG9SX-LM. Low-speed Monitoring Unit. Low-speed Monitoring Function Ensures Safety for Maintenance Work. Model Number Structure.
Low-speed Monitoring Unit G9SX-LM Low-speed Monitoring Function Ensures Safety for Maintenance Work Motor rotation speed detected by Proximity Sensor. Monitors and confirms that speed does not exceed the
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
More informationG9SA. Safety Relay Unit. The G9SA Series Offers a Complete Line-up of Compact Units. Model Number Structure
Safety Relay Unit G9 CSM_G9_DS_E The G9 Series Offers a Complete Line-up of Compact Units. Four kinds of -mm wide Units are available: A -pole model, a -pole model, and models with poles and OFF-delay
More informationDIN 48 x 48 Multifunction Counter/Tachometer with a Bright, Easy-to-view Negative Transmissive LCD. The H7CX Defines a New Standard.
Multifunction Counter/Tachometer (DIN 48 48) H7CX Series CSM_H7CX_DS_E_2_1 DIN 48 x 48 Multifunction Counter/Tachometer with a Bright, Easy-to-view Negative Transmissive LCD. The H7CX Defines a New Standard.
More informationProduct Discontinuation Notices. Discontinuation Notice of Compact proximity sensor TL-M series (for china area only)
PRODUCT NEWS Product Discontinuation Notices August 1, 2011 Proximity Sensors No. 2011248E-2 Discontinuation Notice of Compact proximity sensor (for china area only) Product Discontinuation Recommended
More informationTimer, Counter & Display
Timer, Counter & Display Quick Selection Guide Category Front Panel Size Pin Type Mounting Type Model No. Counter/Timer Dual use 72X72 - Flush mounting type KCT-72 72X36 - Flush mounting type KCT-DP Counter
More informationExpansion Unit G9SX-EX Safety 2 Instantaneous safety outputs
Flexible Safety Unit / Safety Guard Switching Unit G9SX/G9SX-GS CSM_G9SX_G9SX-GS_DS_E_8_1 Logical Function Adds Flexibility to Various Safety Circuits Be sure to read the Safety Precautions on page 45.
More informationModel Number Structure
Analogue Temperature Controller E5C2 DIN-sized (48 x 48 mm) Temperature Controller with Analog Setting Compact, low-cost Temperature Controller. Incorporates proportional control and reset adjustment function.
More informationAmplifiers, Counters, Timers & Controls
Amplifiers, Counters, Timers & Controls Panel Meter 814 Counter/Timer/Rate Indicator 815-817 Speed Monitor 818-819 Signal Converter 820-822 Power Supplies/Amplifier 823-824 813 Panel Meter Panel Meter
More informationFor full product information, visit Use the SpeedSpec code or scan the QR Code for quick access to the specific web page.
R Safety Monitoring Relays For full product information, visit www.sti.com. Use the SpeedSpec code or scan the QR Code for quick access to the specific web page. Dual-Channel Safety Monitoring Relay Power
More information4 mm. 8 mm. Proximity Sensor. Sensing head Sensing distance Output configuration Part Number M18 Shielded 4 mm DC 3-wire PNP-NO E2EZ-X4B1 M30
Sensing distance Supply voltage Output 4 mm 8 mm 12 to 24 VDC 100 to 220 VAC 200 ma max. 100 ma max. Proximity Sensor Detects Objects without Being Influenced by Aluminum and Cast Iron Cut Chips Sense
More informationPROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL
PROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL TR-6 Series Time Ranger tm The TR-6 Series offers the fl exible programmability of a multi-range time delay relay together with a universal input
More informationMultifunction Preset Counter H7CX
Multifunction Preset Counter H7CX Highly visible display with backlit negative transmissive LCD. Programmable PV color to visually alert when output status changes (screw terminal block models). Intuitive
More informationPROGRAMMABLE MULTI-RANGE ON DELAY, INTERVAL ON & FLASHER
PROGRAMMABLE MULTI-RANGE ON DELAY, INTERVAL ON & TR-6 Series Time Ranger tm The TR-6 Series offers the fl exible programmability of a multi-range time delay relay together with a universal input voltage.
More informationSolid-state Timer. Ordering Information. Miniature Timer with Multiple Time Ranges and Multiple Operating Modes H3YN- - Accessories (Order Separately)
Solid-state Timer Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
More information(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)
Solid-state Relay Compact SSRs Ideal for Built-in Applications Vertical, compact SSRs with an operation indicator offered in versatile variations. Can be mounted side by side with an electromagnetic relay
More informationPROGRAMMABLE MULTI-RANGE OFF DELAY, SINGLE SHOT & WATCHDOG
PROGRAMMABLE MULTI-RANGE OFF DELAY, & TR-6 Series Time Ranger tm The TR-6 Series offers the fl exible programmability of a multi-range time delay relay together with a universal input voltage. These products
More informationA16. Separate Construction with Cylindrical 16-dia. Body. Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.
Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.) Separate Construction with Cylindrical 16-dia. Body Miniature design of 28.5 mm, the smallest class in the industry. Detachable
More informationSolid-state Timer. Ordering Information. Ultra-slim Timer for G2R Relay Socket. H3RN-jj. Accessories (Order Separately) Connecting Socket
Solid-state Timer Ultra-slim Timer for G2R Relay Socket Pin configuration compatible with G2R Relay and mounts to the P2R/P2RF Socket. Standard multiple time ranges and multiple operating modes. Conforms
More informationDIN Track Mounted, Standard 22.5-mm Width Timer Range
22.5 mm Timer DIN Track Mounted, Standard 22.5-mm Width Timer Range A wide AC/DC power supply range (24 to 240 VAC/DC) reduces the number of r models kept in stock. Terminal clamp left open when delivered.
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
More informationNote: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.
I/O Block Base G7A Reduces Wiring while Providing I/O Flexibility Mount I/O relays and I/O SSRs freely. Electric-shock preventive (finger-touch protection) terminal block incorporated conforming to VDE
More informationSlim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
More information7. Approved Standards US: UL, CSA UL: FILE No.E CSA: FILE No.LR31928) 8. Special Function None : Standard U : For ultrasonically cleanable
Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW (Rated power consumption: mw) pickup coil power. Impulse withstand of 1,V ( 1 μs) meets FCC requirements. Stick packing employed
More informationClassification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.
More informationSolid-state Timers H3DK
New Product News Solid-state Timers H3DK DIN Track-mounted, 22.5-mm-width Standard Timer Series LR A wide AC/DC power supply range (24 to 240 VAC/DC).*1 All sub-series include models with 12-VDC power
More informationConductive Level Controller
Conductive Level Controller 61F-D21T-V1 Ideal for level control for industrial facilities and equipment. Outputs can be set to self-hold at ON or OFF using self-holding circuits. Sensitivity adjustment
More informationElectronic Preset Counter with 2 Presets and Print interface. NE213 Prog Features
Electronic Preset Counter with 2 Presets and Print interface NE21 Prog. 09 Features Order designation Order no. Interface RS22 Models Connection Functions LED-preset counter with 2 presets Batch counter
More informationSetting method Indication Control Output Model method mode Thermocouple (with sensor burnout detection circuit)
Temperature Controller DIN-sized (48 x 48 mm) Temperature Controller With Digital Setting Compact, low-cost Temperature Controller Incorporates proportional adjustment and reset adjustment function. Incorporates
More informationInductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor with Cable Amplifier Offers Greater Mounting Flexibility Programmable Controller-compatible Subminiature, shielded sensing head (3 or 8 dia.) allows the Sensor
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_4_4 Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationRE48ATM12MW on-delay timing relay s..300 h V AC - 2 OC
Characteristics on-delay timing relay - 0.02 s..300 h - 24..240 V AC - 2 OC Product availability : Stock - Normally stocked in distribution facility Price* : 73.00 USD Main Range of product Product or
More informationMaking Hazardous Operations Safe and Productive
NEW Safety Guard Switching Unit G9SX-GS Making Hazardous Operations Safe and Productive Making Hazardous Operations Safe and Productive This new addition to the model of Flexible Safety Unit G9SX series
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
More informationCPU Units with 20 I/O points
CPM2A General s CPU Units with 20 I/O points CPU Units with 30 I/O points CPU Units with 40 I/O points Supply voltage AC power 100 to 240 VAC, 50/60 Hz DC power 24 VDC Operating voltage AC power 85 to
More informationPROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL
PROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL TR-6 Series Time Ranger tm INPUT VOLTAGE PRODUCT WIRING/ FUNCTION 50/60Hz. NUMBER SOCKET time delay relays plug-in Each unit has 16 timing ranges
More informationNO: TI-045 PRODUCT: H3CR Timers DATE: November 2012 TYPE: Modification Notice
NO: TI-045 PRODUCT: H3CR rs DATE: November 2012 TYPE: Modification Notice H3CR Series rs Modified with Additional Operating Modes, s; Expanded Supply Voltage Ranges Effective April 1, 2013, H3CR rs will
More informationG3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
More informationSolid-state Timer H3YN
Solid-state Timer H3YN Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
More informationDigital Counter H7CZ. Easy to Use and Easy to Read. Features. Basic Features Better Readability Character Height of 10 mm with a Wide Viewing Angle.
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-6 32 Ph: +91 44 4353 8888 Fax: 44 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com New Product Digital Counter
More informationCombine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks.
9 Relay I/O Block Reduces Wiring within the Control Panel and Reduces Installation Time 1 Compact 16-pt models: 182 W l 85 D l 68 H mm; 8-pt block width is 102 mm 1 Can be connected to the PLC with a connecting
More informationTemperature Controller E5C4
Temperature Controller 1/16 DIN Sized, Digital-Set Controller Features Easy-to-Read LED Display Proportional-derivative (PD) control or ON/OFF control models Front panel offset adjustment on PD controllers
More informationPRD/PRDW Series. Long Distance Type
Long Distance Type Long distance proximity Features Long sensing distance (. to times longer sensing distance guaranteed compared to existing models) Improved the noise resistance with dedicated IC Built-in
More informationModel Number Structure
Digital Timer CSM DS_E_2_1 Miniature DIN-sized (48 x 48 mm) Quartz Timer with Abundant Series Versions Series version cover a wide range of rated times; 9.999 s, 99.99 s, 999.9 s, 99 min 59 s, and 99 hrs
More information02/11/2015
35 mm - 1 Relay 8A OUR1 Part number 88867105 Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external
More informationG9SX-GS. Safety Guard Switching Unit. A Safety Measure for Hazardous Operations That Does Not Lower Productivity. Auto Switching Function
Safety Guard Switching Unit CSM DS_E_6_1 A Safety Measure for Hazardous Operations That Does Not Lower Productivity Two functions support two types of application: Auto switching: For applications where
More informationTimers. GT5Y Series ON Delay Timers. ±3% maximum (over 10 to 50 C, reference temperature 20 C) Setting Error. ±10% maximum
GT5Y GT5Y Series ON Delay Key features: 4PDT, 3A or DPDT, 5A contacts 4 time ranges Repeat error ±0.2% maximum Control settings by hand or screwdriver Power ON and timing out LED indicators Uses the same
More informationModel Number Structure
Temperature Controller CSM DS_E_5_1 DIN-sized (48 x 48 mm) Temperature Controller with Analog Setting Compact, low-cost Temperature Controller. Incorporates proportional control and reset adjustment function.
More informationElectronic monitoring relays PMDsrange
Unit features Altdaten CMT For DC and AC supplies Normally energised mode Fault latching or automatic reset Normal/test mode External reset button can be connected Description The insulation monitoring
More informationSafety Monitoring Relays
Safety Monitoring Relays Contents Selection Guide I-2 Safety Monitoring Relays G9SA I-6 SR101A I-12 SR103AM I-13 SR104P I-17 SR105E I-17 SR106ED I-21 SR108AD & SR109AD I-18 SR120MP I-21 SR125SMS45 I-22
More informationH7BX CSM_H7BX_DS_E_4_4
Multifunction Counter (DIN 72 72) H7BX CSM_H7BX_DS_E_4_4 DIN 72 72 mm Multifunction Counter with a Bright, Easy-to-view, Negative Transmissive LCD. Highly visible display with backlit transmissive LCD.
More informationSolid-state Timers H3DK
New Product News Solid-state Timers H3DK DIN Track-mounted, 22.5-mm-width Standard Timer Series A wide AC/DC power supply range (24 to 240 VAC/DC). *1 All sub-series include models with 12-VDC power supply.
More informationDisplays Transducers. Displays and transducers
JJ Displays JJ Transducers Displays and transducers DS_Displays_and_transducers 06/2016 225 Displays and transducers Our electronic devices for flow and volume measurement are suitable for all SIKA flow
More informationCircuit diagram. Time ranges. Function. Function diagrams. Notes. Dimension diagram. Page 1
NGZ 11 ON-delay single-range timer relay Multi voltage for AC/DC 24 up to 240 V 1 function: ON-delay (AV) 13 time ranges available from 0.1 s to 100 h 1 change-over contact 2 LEDs for function display
More informationTC 34 MICROPROCESSOR-BASED DIGITAL ELECTRONIC COUNTER
TC 34 MICROPROCESSOR-BASED DIGITAL ELECTRONIC COUNTER TECHNICAL DATA MECHANICAL DATA Housing Self-extinguishing plastic, UL 94 V0 Dimensions 33x75 mm depth 64 mm Weight 175 g approx. Connections 2,5 mm
More informationKTC. Preset Counter/ Timer. Programmable Type. Model Number Legend SALIENT FEATURES. Sensing. Digital Panel Meters
Preset Counter/ Timer Programmable Type Model Number Legend SALIENT FEATURES 6 Digits PV, SV Universal Input Dual alarm output MODBUS via RS-485 High Speed - 10 KCPS Multiple output modes Batch Counting,
More information