USB/SD/MMC CARD READER SX-4472USD

Transcription

1 PORTABLE USB/SD/MMC CARD READER SX-4472USD In order to achieve the best performance of your product, please read this instruction manual carefully before using, and keep it for future reference. If you need extra support, please write to

2 CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN Caution: To reduce the risk of electric shock do not open this device, there are not serviceable parts for customers. Please refer any maintenance or repair to qualified personnel. This sign means the existence of dangerous voltage at the inside of the unit, which states a risk of electric shock. This sign means that there are important instructions of operation and handling in the manual that comes with this device. PREMIER CUSTOMER SERVICE Venezuela: Colombia: Panama: Website ELECTRIC ( ) PEJC (7352) servicioalcliente@premiermundo.com NOTE This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology. 1

3 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire or electric shock, do no place objects filled with liquids, such as vases, on the apparatus. Connect the apparatus to an easily accessible AC outlet. Should you notice an abnormality in the apparatus, disconnect the main plug from the AC outlet immediately. WARNING 1.Battery may explode if mistreated. 2.Do not recharge, disassemble or dispose of in fire. AC operation 1.Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains voltage in your home. 2. Plug the corresponding end of cord into the power socket on the rear of the set. 3. Insert the plug into power supply. Battery operation Insert 4 pcs of UM1 batteries. Please observe correct battery polarities or the set will not work. Recharging the Battery (Built in Rechargeable Battery) 1.Plug in the power(ac 110/220V)can be automatically charged, It will automatically stop charging when the electricity be saturation.(any state) 2.The first charge must be more than 12 hours. 3.Theory of working time is 2 hours. Note: This unit does not charge UM1 batteries installed in the battery compartment. Accessories 1. AUX-IN CONNECTOR CABLE 2. Remote controller 3. Power cord 1 pc 1 pc 1 pc 4. Instruction manual 1 pc 5. SILICA GEL 1 pc 2

4 Antenna 2. Band switch 3. Tuning knob 4. Volume control 5. Built in Speaker 6. Battery compartment(back) 7. AC power socket(back) 8. Function switch 9. Phone Jack 10.AUX-IN Jack 11.USB connection 12.SD connection 13.USB Fast forward Button 14.USB Rew Button 15.USB Repeat button 16.USB Play/pause button 17.Mp3 indicator 18.EQ Button 19.Mode Button 20.IR receiver 3

5 Remote controller (RC) 1. AUDIO MUTE button 2. MODE button 3. PLAY/PAUSE button 4. NEXT/ button 5. PREV/ button 6.EQ button 7.VOLUME LEVEL+ button 8.VOLUME LEVEL- button 9. REPEAT button 10. NUMERIC KEYS MODE PREV NEXT PLAY/PAUSE VOL- VOL+ EQ VOL- VOL Changing the battery When the battery becomes weak, the operating distance of the Remote Control is greatly reduced and you will need to replace the Lithium battery. 1. Remove the battery compartment from bottom of the Remote Control. 2. Install 1 CR2025 Lithium battery with the positive side facing up. 3. Replace the battery compartment. Note: Only playback of MP3 is available LCD Display 1. Message or number indicators. (Title, Chapter, playing time or other information) 2. AUXIN indicator 3. USB play indicators. 4. SD/MMC Card play indicators. 5.REP1: Repeat one track/ chapter indicator. REP All: Repeat full disc/ title indicator. 3 4 RADIO operation 1. By factory default, RADIO starts once power is on, 1 2. Push AM/FM/SW1/SW2 to switch between AM/FM/SW1/SW2 band. 3. Extend the length of the telescopic and to enhance FM reception, turn the unit horizontally to enhance AM reception. 4. Rotate TUNING to tune to a desired frequency. FM PM AM 2 AUX 1 5 ALL MHz USB(SD)PLAYBACK 1.Turn on the power 4

6 2.Set the function selector to USB(SD) 3.Insert a USB flash drive(or a SD card)with Mp3 format music, the unit will play automatically, press it again to continue the playback, press repeat button to repeat the playing song, press rew button to select the previous song and f.f button to the next song. NOTE: This product can support memory size of USB/SD/MMC device up to 16GB. AUX-IN The unit can be used as an audio amplifier through the AUX-IN jack equipped. 1.Select function AUX-IN. 2.Connect the unit's AUX-IN jack with a 3.5mm stereo phone plug. 3.Connect the other end of the cable to the MP3 Player or other audio sources. Slowly adjust the volume of the source equipment to an appropriate level. 4.To change to radio, just unplug the AUX-IN cable from the jack of the unit. Note: USB/SD/MMC features are not available when insert a AUX-IN cord. Specifications FM Frequency Range MHz AM Frequency Range KHz SW Frequency Range MHz FM/SW...Telescopic antenna AM...Built-in ferrite bar antenna Storeage Media...USB Flash Drive/ SD Card/ MMC Card Speaker...76mm cone type(2) 3.5mm Headphone Socket...For 32 ohm Impedance Headphones Power output...1.8w+1.8w(eiaj 4OHM x 2) Power requirements...dc 6V using 4 UM1 batteries or 1 x 6V rechargeable battery AC 110V/220V,60/50Hz Power consumption...10w Dimensions(LxWxH)...250x170x105 mm Weight (excluding batteries)...1.2kgs Inputs AUX-IN...500mV/50kΩ Specifications and external appearance are subject to change without notice. 5

7 6

8 7

9 8