Video Command Reference
|
|
|
- April Hawkins
- 5 years ago
- Views:
Transcription
1 Video CLI Tree Video Command Reference This section provides a command reference for the CLI commands for IP-TV video applications Topics include: IP-TV Command Hierarchies on page 676 Hardware Commands on page 676 Video Group Commands on page 676 Video Policy Video Commands on page 676 Bundle and Channel Commands on page 678 Service Video Interface Commands on page 680 Show Commands on page 683 Clear Commands on page 683 Debug Commands on page 684 Video Services Commands on page ESS and 7750 SR Multiservice Integrated Service Adapter Guide Page 675
2 IP-TV Command Hierarchies IP-TV Command Hierarchies Hardware Commands config [no] card slot-number card-type card-type no card-type [no] mda mda-slot mda-type mda-type no mda-type Video Group Commands config isa lns-group lns-group-id [create] no lns-group lns-group-id mda mda-id [drain] no mda mda-id video-group video-group-id [create] no video-group video-group-id [no] ad-insert [no] analyzer [no] enable-rt-client [no] fcc-server [no] local-rt-server [no] primary mda-id resv-ret resv-ret [no] stream-selection Video Policy Video Commands config mcast-management multicast-info-policy policy-name [create] no multicast-info-policy policy-name video-policy video-interface ip-address [create] no video-interface ip-address fcc-session-timeout seconds no fcc-session-timeout hd Page ESS and 7750 SR Multiservice Integrated Service Adapter Guide
3 Video CLI Tree dent-threshold threshold no dent-threshold fcc-burst burst-percentage no fcc-burst fcc-server [mode {burst dent hybrid}] local-rt-server mc-handover percentage no mc-handover rt-rate rt-burst-percentage no rt-rate max-sessions sessions no max-sessions pip dent-threshold threshold no dent-threshold fcc-burst burst-percentage no fcc-burst fcc-server [mode {burst dent hybrid}] local-rt-server mc-handover percentage no mc-handover rt-rate rt-burst-percentage no rt-rate rt-mcast-reply [count count] [interval milliseconds] [holdtime milliseconds] no rt-mcast-reply rt-payload-type payload-type no rt-payload-type rt-rate rt-burst-percentage no rt-rate sd dent-threshold threshold no dent-threshold fcc-burst burst-percentage no fcc-burst fcc-server [mode {burst dent hybrid}] local-rt-server mc-handover percentage no mc-handover rt-rate rt-burst-percentage no rt-rate subscriber-bw-limit bandwidth no subscriber-bw-limit 7450 ESS and 7750 SR Multiservice Integrated Service Adapter Guide Page 677
4 Bundle and Channel Commands Bundle and Channel Commands config mcast-management multicast-info-policy policy-name [create] no multicast-info-policy policy-name bundle bundle-name [create] no bundle bundle-name admin-bw kbps no admin-bw bw-activity {use-admin-bw dynamic [falling-delay seconds]} [blackhole-rate kbps] no bw-activity channel ip-address [ip-address] [create] no channel ip-address [ip-address] admin-bw kbps no admin-bw video fcc-channel-type {hd sd pip} no fcc-channel-type fcc-min-duration time no fcc-min-duration fcc-server [disable] local-fcc-port port no local-fcc-port local-rt-port port no local-rt-port local-rt-server [disable] reorder-audio time no reorder-audio rt-buffer-size rt-buffer-size no rt-buffer-size rt-server disable rt-server ip-address port port-num no rt-server video-group video-group-id video-group disable no video-group source-override ip-address [create] no source-override ip-address admin-bw kbps no admin-bw video fcc-channel-type {hd sd pip} no fcc-channel-type fcc-min-duration time no fcc-min-duration fcc-server [disable] local-fcc-port port no local-fcc-port local-rt-port port Page ESS and 7750 SR Multiservice Integrated Service Adapter Guide
5 Video CLI Tree no local-rt-port local-rt-server [disable] reorder-audio time no reorder-audio rt-buffer-size rt-buffer-size no rt-buffer-size rt-server disable rt-server ip-address port port-num no rt-server video-group video-group-id no video-group video fcc-channel-type {hd sd pip} no fcc-channel-type fcc-min-duration time no fcc-min-duration fcc-server [disable] local-fcc-port port no local-fcc-port local-rt-port port no local-rt-port local-rt-server [disable] reorder-audio time no reorder-audio rt-buffer-size rt-buffer-size no rt-buffer-size rt-server disable rt-server ip-address port port-num no rt-server source-port port-num no source-port video-group video-group-id video-group disable no video-group 7450 ESS and 7750 SR Multiservice Integrated Service Adapter Guide Page 679
6 Service Video Interface Commands Service Video Interface Commands VPLS Commands config>service>vpls service-id multicast-info-policy policy-name no multicast-info-policy video-interface ip-int-name [create] no video-interface ip-int-name [no] address ip-address/mask cpu-protection policy-id no cpu-protection gateway-ip ip-address no gateway-ip multicast-service service-id no multicast-service rt-client-src-address ip-address no rt-client-src-address video-sap video-group-id no video-sap egress qos egress-qos-policy-id ingress qos ingress-qos-policy-id Page ESS and 7750 SR Multiservice Integrated Service Adapter Guide
7 Video CLI Tree IES Commands config>service>ies service-id video-interface ip-int-name [create] no video-interface ip-int-name [no] address ip-address/mask adi channel mcast-address source ip-address [channel-name channel-name] no channel mcast-address source ip-address scte35-action {forward drop} zone-channel mcast-address source ip-address adi-channel-name channel-name no zone-channel mcast-address source ip-address scte30 [no] ad-server ip-address local-address control ip-address data ip-address no local-address multicast-service service-id no multicast-service rt-client-src-address ip-address no rt-client-src-address video-sap video-group-id no video-sap egress qos egress-qos-policy-id ingress qos ingress-qos-policy-id 7450 ESS and 7750 SR Multiservice Integrated Service Adapter Guide Page 681
8 Service Video Interface Commands VPRN Commands Note that VPRN service commands are only applicable to the 7750 SR-Series platforms. config>service>vprn service-id video-interface ip-int-name [create] no video-interface ip-int-name [no] address ip-address/mask adi channel mcast-address source ip-address [channel-name channel-name] no channel mcast-address source ip-address scte35-action {forward drop} zone-channel mcast-address source ip-address adi-channel-name channel-name no zone-channel mcast-address source ip-address scte30 [no] ad-server ip-address local-address control ip-address data ip-address no local-address multicast-service service-id no multicast-service rt-client-src-address ip-address no rt-client-src-address video-sap video-group-id no video-sap egress qos egress-qos-policy-id ingress qos ingress-qos-policy-id Page ESS and 7750 SR Multiservice Integrated Service Adapter Guide
9 Video CLI Tree Show Commands show isa video-group [video-group-id] show video adi [service service-id] [interface ip-int-name] [address mcast-address] [source ip-address] [detail] channel [service service-id] [interface ip-int-name] [address mcast-address] [source ip-address] [summary detail] [pid config [analyzer[interval time-interval]]] session [service service-id] [interface ip-int-name] [address mcast-address] [source ip-address] splice-status [service service-id] [interface ip-int-name][address mcast-address] [source ip-address] [start-time start-time [interval time-interval]] channel [service service-id] [interface ip-int-name] [address mcast-address] [source ipaddress] [summary detail] interface [service service-id] [interface ip-int-name] [stats {rt-server fcc-server}] interface [service service-id] [interface ip-int-name] summary rtp-session [service service-id] [source ip-address] [detail [stats {rt-server fcc-server}]] rtp-session [service service-id] summary Clear Commands clear video id service-id session all session client srcaddr statistics id service-id adi-session channel all [rt-client] [rt-server] [fcc-server] [ad-insert] channel grp-address [source srcaddr] [rt-client] [rt-server] [fcc-server] [ad-insert] interface ip-int-name [address ip-address] rt-client] [rt-server] [fccserver] [ad-insert] session all [rt-server] [fcc-server] session client srcaddr [rt-server] [fcc-server] isa video-group-id [mda-id] 7450 ESS and 7750 SR Multiservice Integrated Service Adapter Guide Page 683
10 Debug Commands Debug Commands debug [no] service id service-id [no] video-interface video-ip-int-name adi [zone-channel-name] no adi adi-packet [zone-channel-name] [type {type-name [type-name] all}] no adi-packet fcc-server [client client-ip [source-port src-port]] packet-rx [client client-ip [source-port src-port]] [fcc-join] [fcc-leave] [ret-nack] no packet-rx packet-tx [group grp-addr [source srcaddr]] [ret-nack] no packet-tx rt-client [group group-addr] no rt-client rt-server [client client-ip [source-port src-port]] no rt-server sg [group grp-addr [source src-addr]] no sg Page ESS and 7750 SR Multiservice Integrated Service Adapter Guide
Ingress Multicast Path Management
Ingress Multicast Path Management In This Chapter This section provides information about Ingress Multicast Path Management (IMPM). Topics in this section include: Applicability on page 2406 Summary on
ESM IPv4: Multicast in a Wholesale/Retail Scenario
ESM IPv4: Multicast in a Wholesale/Retail Scenario In This Chapter This section describes ESM IPv4 multicast configurations in a wholesale/retail scenario. Topics in this section include: Applicability
IP Router Command Reference
IP Router Configuration IP Router Command Reference Command Hierarchies Configuration Commands Router Commands on page 94 Router L2TP Commands on page 96 Router Interface Commands on page 99 Router Interface
MVPN: Inter-AS Option B
MVPN: Inter-AS Option B In This Chapter This section provides information about MVPN: Inter-AS Option B configurations. Topics in this section include: Applicability on page 802 Overview on page 803 Configuration
Mirror Service Command Reference
Mirror Services Mirror Service Command Reference Command Hierarchies Mirror Configuration Commands on page 83 Lawful Intercept Commands on page 87 Debug Commands on page 86 Show Commands on page 90 Mirror
Configuring Triple Play Multicast Services with CLI
Triple Play Service Delivery Architecture Configuring Triple Play Multicast Services with CLI VPLS This section provides information to configure multicast parameters in a Triple Play network using the
Configuration Commands
Interface Configuration Configuration Commands Generic Commands on page 159 Card Commands on page 162 MDA Commands on page 170 MDA/Port QoS Commands on page 178 General Port Commands on page 184 APS Commands
Multicast in a VPN I. In This Chapter SR Advanced Configuration Guide Page 635
Multicast in a VPN I In This Chapter This section provides information about multicast in a VPRN service. Topics in this section include: Applicability on page 636 Summary on page 637 Overview on page
DTECH LMR Multicast Demo Configuration Guide 8/28/2014
DTECH LMR Multicast Demo Configuration Guide 8/28/2014 This is an example of how to configure Vocality Basics with Twisted Pairs WAVE. This document is built for DTECH LABS products to include but, not
Multi-Chassis IPSec Redundancy
Multi-Chassis IPSec Redundancy In This Chapter This section provides information about multi-chassis IPSec redundancy configurations. Topics in this section include: Applicability on page 1542 Overview
Q Show Commands Q Show Commands
qos dcbxp incompatibility interface, on page 2 qos dcbxp info, on page 3 qos dcbxp interface, on page 4 qos shared-policer, on page 6 queuing, on page 8 queuing pfc-queue, on page 10 queuing pfc-queue
Configuring an IES Service with CLI
Internet Enhanced Services Configuring an IES Service with CLI IES This section provides information to configure IES services using the command line interface. Topics in this section include: Basic Configuration
Link Bundling Commands
Link Bundling Commands This module provides command line interface (CLI) commands for configuring Link Bundle interfaces on the Cisco NCS 5000 Series Router. For detailed information about Link Bundle
Configuring Physical Ports with CLI
Interface Configuration Configuring Physical Ports with CLI This section provides information to configure cards, MDAs, and ports. Topics in this section include: Preprovisioning Guidelines on page 97
WiFi Command Reference
Triple Play Service Delivery Architecture Configuration Commands WLAN-GW Commands on page 1621 RADIUS Server and Proxy Commands on page 1622 LUDB Matching for RADIUS Proxy Cache on page 1624 Data Plane
NAT Command Reference
Command Reference Command Hierarchies ISA Configuration Commands on page 639 NAT Service Configuration Commands on page 640 VPRN Commands on page 643 NAT Subscriber Management Commands on page 645 NAT
Class Fair Hierarchical Policing for SAPs
Class Fair Hierarchical Policing for SAPs In This Chapter This section provides information to configure Class Fair Hierarchical Policing for SAPs. Topics in this section include: Applicability on page
IP Router Command Reference
IP Router Configuration IP Router Command Reference Command Hierarchies Configuration Commands Router Commands on page 100 Router BFD commands on page 102 Router L2TP Commands on page 103 Router Interface
Configuring Application Assurance with CLI
Application Assurance Configuring Application Assurance with CLI This section provides information to configure Application Assurance entities using the command line interface. It is assumed that the user
TMS-Related Show Commands
TMS-Related Show Commands tms Syntax tms routes [tms-interface interface-name] [family][active inactive] Context show>router Description This command displays TMS route information. Parameters tms-interface
EVPN for VXLAN Tunnels (Layer 3)
EVPN for VXLAN Tunnels (Layer 3) In This Chapter This section provides information about EVPN for VXLAN tunnels (Layer 3). Topics in this section include: Applicability on page 312 Overview on page 313
GMPLS Configuration Commands. LMP Commands. lmp. gmpls-loopback-address. peer XRS MPLS Guide Page 493 GMPLS. Description
GMPLS GMPLS Configuration Commands LMP Commands lmp [no] lmp config>router This command creates a context for the configurartion of the Link Management Protocol (LMP) on the system. no lmp gmpls-loopback-address
AVC Configuration. Unified Policy CLI CHAPTER
CHAPTER 3 Revised: February 7, 2013, This chapter addresses AVC configuration and includes the following topics: Unified Policy CLI, page 3-1 Metric Producer Parameters, page 3-2 Reacts, page 3-2 NetFlow/IPFIX
Contents. Introduction. Methodology. Check for Output Drops. Introduction Methodology
Contents Introduction Methodology Check for Output Drops Determine if the Drops are Unicast or Multicast Determine Which Output Buffer is Used Check the Active Buffer Monitoring Counters Actively Increment
Configuration Commands. Generic Commands. description XRS Quality of Service Guide Page 125
Configuration Commands Generic Commands description Syntax description description-string no description Context config>qos>shared-queue config>qos>network-queue config>qos>network config>qos>network>ingress>ipv6-criteria>entry
Configuring Priority Flow Control
This chapter contains the following sections: Information About Priority Flow Control, page 1 Guidelines and Limitations, page 2 Default Settings for Priority Flow Control, page 3 Enabling Priority Flow
Global Services Command Reference
Subscriber Services Global Services Command Reference Command Hierarchies Customer Commands on page 155 MRP Commands on page 156 Service System Commands on page 156 Oper Group Commands on page 157 Pseudowire
Configuration Commands. Generic Commands. shutdown: Multicast XRS Routing Protocols Guide Page 103. Syntax [no] shutdown
![Configuration Commands. Generic Commands. shutdown: Multicast XRS Routing Protocols Guide Page 103. Syntax [no] shutdown](/thumbs/95/125535986.jpg "Configuration Commands. Generic Commands. shutdown: Multicast XRS Routing Protocols Guide Page 103. Syntax [no] shutdown")
Multicast Configuration Commands Generic Commands shutdown Syntax [no] shutdown Context config>router>igmp config>router>igmp>interface config>router>igmp>interface>group-interface config>router>igmp>if>mcac>mc-constraints
IP SLAs Multicast Support
This module describes how to configure and schedule an IP Service Level Agreements (SLAs) multicast UDP jitter operation for measuring and reporting statistics such as one way latency, jitter, and packet
atm txbuff atm txbuff number no atm txbuff Syntax Description
atm txbuff atm txbuff To set the maximum number of transmit buffers for simultaneous packet fragmentation, use the atm txbuff interface configuration command. To restore the default value, use the no form
Using the VQE-S Application Monitoring Tool
CHAPTER 4 This chapter describes how to use Cisco VQE-S Application Monitoring Tool (VQE-S AMT or AMT). The tasks that you can perform with VQE-S AMT are listed in Table 4-1. Table 4-1 VQE-S AMT Tasks
Dynamic PCC. Information About Dynamic PCC. Path Computation Element Protocol Functions
The Stateful Path Computation Element Protocol(PCEP) enables a router to report and optionally delegate Label Switched Paths (LSPs) which is established using either Resource Reservation Protocol (RSVP)
Dynamic Guaranteed Bit Rate
This chapter describes the following topics: Feature Summary and Revision History, page 1 Feature Description, page 2 How It Works, page 2 Limitations and Restrictions, page 3 Configuring Dedicated GBR
Fibre Channel Slow Drain Device Detection and Congestion Avoidance- An Overview
Fibre Channel Slow Drain Device Detection and Congestion Avoidance- An Overview All data traffic between end devices in the SAN fabric is carried by Fibre Channel Class 3, and in some cases, Class 2 services,
Configuring sflow. Information About sflow. sflow Agent. This chapter contains the following sections:
This chapter contains the following sections: Information About sflow, page 1 Licensing Requirements, page 2 Prerequisites, page 2 Guidelines and Limitations for sflow, page 2 Default Settings for sflow,
Multicast/Broadcast Setup
Configuring Multicast Mode, page 1 Mediastream, page 9 Configuring Multicast Domain Name System, page 14 Configuring Multicast Mode Information About Multicast/Broadcast Mode If your network supports packet
Configuring Cisco Mediatrace
This chapter contains information about and instructions for configuring Cisco Mediatrace. Cisco Mediatrace enables you to isolate and troubleshoot network degradation problems for data streams. Although
Congestion Avoidance. Finding Feature Information
This chapter provides information about slow devices that cause congestion (slow-drain devices) in a network and how to avoid slow-drain devices. Finding Feature Information, page 1 Feature History for,
Configuring Priority Flow Control
About Priority Flow Control, on page 1 Licensing Requirements for Priority Flow Control, on page 2 Prerequisites for Priority Flow Control, on page 2 Guidelines and Limitations for Priority Flow Control,
Configuring Port Channels
This chapter contains the following sections: Information About Port Channels, page 1, page 9 Verifying Port Channel Configuration, page 16 Verifying the Load-Balancing Outgoing Port ID, page 17 Feature
Configuring Traffic Storm Control
This chapter describes how to configure traffic storm control on the Cisco NX-OS device. This chapter includes the following sections: Finding Feature Information, page 1 Information About Traffic Storm
7210 SAS E OS Interface Configuration Guide
7210 SAS E OS Interface Configuration Guide Software Version: 7210 SAS OS 1.1 Rev. 6 January 2010 Document Part Number: 93-0221-02-02 *93-0221-02-02* This document is protected by copyright. Except as
Cisco Nexus 9500 Series Switches Buffer and Queuing Architecture
White Paper Cisco Nexus 9500 Series Switches Buffer and Queuing Architecture White Paper December 2014 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
ESM Basics. In This Chapter SR Advanced Configuration Guide Page This section provides information about Enhanced Subscriber Management.
ESM Basics In This Chapter This section provides information about Enhanced Subscriber Management. Topics in this section include: Applicability on page 2078 Summary on page 2079 Overview on page 2081
TS Open Day Data Center Fibre Channel over IP
TS Open Day Data Center Fibre Channel over IP Presented by: Rong Cheng- TAC LAN & DCN China Jan 30 th, 2015 2013 Cisco and/or its affiliates. All rights reserved. 1 FCIP Introduction FCIP Configuration
Configuring Port Channels
This chapter contains the following sections: Information About Port Channels, page 1, page 10 Verifying Port Channel Configuration, page 21 Verifying the Load-Balancing Outgoing Port ID, page 22 Feature
7210 SAS E OS Interface Configuration Guide
7210 SAS E OS Interface Configuration Guide Software Version: 7210 SAS OS 2.0 Rev. 04 October 2010 Document Part Number: 93-0221-03-04 *93-0221-03-04* This document is protected by copyright. Except as
Configuration Commands Generic Commands Syntax description no description Context Description Default Parameters
Configuration Commands Generic Commands description Syntax description description-string no description Context config>qos>sap-egress config>qos>sap-egress>ip-criteria>entry config>qos>sap-ingress config>qos>sap-ingress>ip-criteria>entry
Configuring Local SPAN and ERSPAN
This chapter contains the following sections: Information About ERSPAN, page 1 Licensing Requirements for ERSPAN, page 5 Prerequisites for ERSPAN, page 5 Guidelines and Limitations for ERSPAN, page 5 Guidelines
Configuring EtherChannels
This chapter describes how to configure EtherChannels and to apply and configure the Link Aggregation Control Protocol (LACP) for more efficient use of EtherChannels in Cisco NX-OS. It contains the following
Using the VQE-S Application Monitoring Tool
CHAPTER 4 This chapter describes how to use Cisco VQE-S Application Monitoring Tool (VQE-S AMT). The tasks that you can perform with VQE-S AMT are listed in Table 4-1. Table 4-1 VQE-S AMT Tasks VQE-S AMT
Cisco Ultra Traffic Optimization
Feature Information, page 1 Overview, page 2 How CUTO Works, page 2 Configuring CUTO, page 5 Monitoring and Troubleshooting, page 10 Feature Information Summary Data Status New Feature Introduced-In Release
Configuring Traffic Storm Control
19 CHAPTER This chapter describes how to configure traffic storm control on the NX-OS device. This chapter includes the following sections: Information About Traffic Storm Control, page 19-1 Virtualization
Configuring Parameters
Configuring the 802.11n Parameters, page 1 Configuring 802.11h Parameters, page 4 Configuring the 802.11n Parameters Information About Configuring the 802.11n Parameters This section provides instructions
Configuring Cisco Performance Monitor
This document contains information about and instructions for configuring Cisco Performance Monitor. Finding Feature Information, page 1 Information About Cisco Performance Monitor, page 1 Restrictions
Application Assurance Best Practices for ISA and Host IOM Overload Protection
Application Assurance Best Practices for ISA and Host IOM Overload Protection In This Chapter This section provides information about Application Assurance best practices for ISA and host IOM overload
RSVP and the Integrated Services Architecture for the Internet
RSVP and the Integrated Services Architecture for the Internet N. C. State University CSC557 Multimedia Computing and Networking Fall 2001 Lecture # 20 Roadmap for Multimedia Networking 2 1. Introduction
SET-UP INSTRUCTIONS. How can the DB91-TX be used as an RTP Sender, sending audio to DB91-RX decoder used as an RTP Receiver
SET-UP INSTRUCTIONS How can the DB91-TX be used as an RTP Sender, sending audio to DB91-RX decoder used as an RTP Receiver Publish Date: 21-Jun-2017 Contents General information... 4 DB91-TX and DB91-RX
Cisco IOS Voice Commands: N
Cisco IOS Voice Commands: N This chapter contains commands to configure and maintain Cisco IOS voice applications. The commands are presented in alphabetical order. Some commands required for configuring
7210-SAS E OS 1.0_R1 SOFTWARE RELEASE NOTES
7210-SAS E OS 1.0_R1 JAN-19-2009 7210-SAS E OS 1.0_R1 SOFTWARE RELEASE NOTES These release notes are for Release 1.0_R1 of the 7210 SAS-E OS software for 7210 SAS E devices. RELEASE NOTE ORGANIZATION The
Enabling Quality Architectures in the Infrastructure. John Warner Strategic Product Marketing Texas Instruments
Enabling Quality Architectures in the Infrastructure John Warner Strategic Product Marketing Texas Instruments Agenda Why do we need it? End Points Probes What protocols are used? Where does it fit? Are
On the Scalability of RTCP Based Network Tomography for IPTV Services. Ali C. Begen Colin Perkins Joerg Ott
On the Scalability of RTCP Based Network Tomography for IPTV Services Ali C. Begen Colin Perkins Joerg Ott Content Distribution over IP Receivers Content Distributor Network A Transit Provider A Transit
4A0-M02. Alcatel-Lucent. Alcatel-Lucent Mobile Gateways for the LTE Evolved Packet Core
Alcatel-Lucent 4A0-M02 Alcatel-Lucent Mobile Gateways for the LTE Evolved Packet Core Download Full Version : https://killexams.com/pass4sure/exam-detail/4a0-m02 Which of the following interfaces is not
Signaling Methods and Object Association for Flex LSPs
Flex LSP also known as Associated Bidirectional LSPs is the combination of static bidirectional MPLS-TP and dynamic MPLS-TE. Flex LSP provides bidirectional label switched paths (LSPs) set up dynamically
Configuration Commands. Generic Commands. description XRS Quality of Service Guide Page 151
Configuration Commands Generic Commands description Syntax description description-string no description Context config>qos>network policy-id Description This command creates a text description stored
RTP: A Transport Protocol for Real-Time Applications
RTP: A Transport Protocol for Real-Time Applications Provides end-to-end delivery services for data with real-time characteristics, such as interactive audio and video. Those services include payload type
Configuring GMPLS with CLI
GMPLS Configuring GMPLS with CLI This section provides information to configure UNI GMPLS using the command line interface. Topics in this section include: GMPLS Configuration Overview on page 462 LMP
Configuring System Management with CLI
System Management Configuring System Management with CLI This section provides information about configuring system management features with CLI. Topics in this chapter include: Basic System Configuration
Multicast Routing and Forwarding Commands
Multicast Routing and Forwarding Commands This module describes the commands used to configure and monitor multicast routing. For detailed information about multicast routing concepts, configuration tasks,
Multi-Chassis APS and Pseudowire Redundancy Interworking
Multi-Chassis and Pseudowire Redundancy Interworking In This Chapter This section describes multi-chassis and pseudowire redundancy interworking. Topics in this section include: Applicability on page 120
Configuring Dynamic ARP Inspection
21 CHAPTER This chapter describes how to configure dynamic Address Resolution Protocol inspection (dynamic ARP inspection) on the Catalyst 3560 switch. This feature helps prevent malicious attacks on the
1. Slow port emulation with R_RDY delay of us (1.5 seconds) 2. Port-monitor - slow port emulation with R_RDY delay of us (1.
Contents Introduction Topology Restrictions in Cisco NX-OS Software Releases Cisco NX-OS Software Release 5.2(8) Cisco NX-OS Software Releases Earlier than 5.2(6) Test 1: Slow Port Emulation with R_RDY
Monitoring QoS Statistics
About QoS Statistics, page 1 Licensing Requirements for, page 1 Prerequisites for, page 2 Guidelines and Limitations, page 2 Enabling Statistics, page 4 Monitoring the Statistics, page 5 Clearing Statistics,
How to Verify Cisco Express Forwarding Switching
How to Verify Cisco Express Forwarding Switching Document ID: 47205 Contents Introduction Prerequisites Requirements Components Used Conventions What Is Cisco IOS Switching? Verification Steps Understand
Configuring System Management with CLI
System Management Configuring System Management with CLI This section provides information about configuring system management features with CLI. Topics in this chapter include: Basic System Configuration
Configuring EtherChannels
Configuring EtherChannels This chapter describes how to configure EtherChannels and to apply and configure the Link Aggregation Control Protocol (LACP) for more efficient use of EtherChannels in Cisco
1 Gbps and 10 Gbps WAN Emulator IPNetSim
1 Gbps and 10 Gbps WAN Emulator IPNetSim Multi Stream IP WAN Emulator 818 West Diamond Avenue - Third Floor, Gaithersburg, MD 20878 Phone: (301) 670-4784 Fax: (301) 670-9187 Email: gl-info@gl.com Website:
Using the Cable Monitor Tool
APPENDIX B This appendix describes the Cisco ubr905 and Cisco ubr925 cable access routers Cable Monitor tool. The Cable Monitor is part of the router s onboard software that provides a web-based diagnostic
OAM and SAA Commands. Generic Commands. shutdown. shutdown XRS OAM and Diagnostics Guide Page 383. OAM, SAA, and OAM-PM Command Reference
OAM, SAA, and OAM-PM Command Reference OAM and SAA Commands Generic Commands shutdown Syntax [no] shutdown Context config>saa>test Description In order to modify an existing test it must first be shut
CCIE Service Provider Sample Lab. Part 2 of 7
CCIE Service Provider Sample Lab Part 2 of 7 SP Sample Lab Main Topology R13 S2/1.135.13/24 Backbone Carrier SP AS 1002 S2/1 PPP E0/1.69.6/24 R6 Customer Carrier SP ABC Site 5 AS 612 E1/0 ISIS.126.6/24
Configuring Switched Port Analyzer
This document describes how to configure local Switched Port Analyzer (SPAN) and remote SPAN (RSPAN) on the router. Finding Feature Information, page 1 Prerequisites for Configuring Local Span and RSPAN,
Enhanced Congestion Control and Overload Control
Enhanced Congestion Control and Overload Control Feature Description, page 1 Configuring Enhanced Congestion Control, page 2 Monitoring and Troubleshooting, page 7 Feature Description The MME provides
Common Components. Cisco Unified Border Element (SP Edition) Configuration Profile Examples 5 OL
The following components of the Cisco Unified Border Element are common to all of the configuration profile examples in this document. Secure Media Adjacencies Call Policies CAC Policies SIP Profiles 5
IES Services Command Reference
Internet Enhanced Services IES Services Command Reference Command Hierarchies IES Service Configuration Commands on page 55 Global Commands on page 55 Interface Commands on page 56 Redundant Interface
ipv6 mobile home-agent (global configuration)
ipv6 mobile home-agent (global configuration) ipv6 mobile home-agent (global configuration) To enter home agent configuration mode, use the ipv6 mobile home-agent command in global configuration mode.
Configuring Queuing and Flow Control
This chapter contains the following sections: Information About Queues, page 1 Information About Flow Control, page 3 Configuring Queuing, page 4 Configuring Flow Control, page 7 Verifying the Queue and
OSPF Command Reference
OSPF OSPF Command Reference Command Hierarchies Configuration Commands on page 329 Show Commands on page 333 Clear Commands on page 333 Debug Commands on page 333 Configuration Commands config [no] ospf
Configuring Traffic Mirroring
This module describes the configuration of the traffic mirroring feature. Traffic mirroring is sometimes called port mirroring, or switched port analyzer (SPAN). Feature History for Traffic Mirroring Release
Configuring MPLS and RSVP with CLI
MPLS and RSVP Configuring MPLS and RSVP with CLI This section provides information to configure MPLS and RSVP using the command line interface. Topics in this section include: MPLS Configuration Overview
Resource Manager Configuration Tool
APPENDIXB This appendix provides information on the requirements, setup and use of the Resource Manager Configuration Tool. The topics in this section include: Overview of the, page B-1 Installing the,
IPv4 and IPv6 Commands
This module describes the Cisco IOS XR software commands used to configure the IPv4 and IPv6 commands for Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details regarding the
Segment Routing On Demand for L2VPN/VPWS
On-Demand Next Hop (ODN) for Layer 2 Virtual Private Network (L2VPN) creates a segment routing (SR) traffic-engineering (TE) auto-tunnel and uses the auto-tunnel for pseudowire dataplane. Restrictions
Configuring sflow. About sflow. sflow Agent
About sflow This chapter describes how to configure sflow on Cisco NX-OS devices. This chapter includes the following sections: About sflow, on page 1 Licensing Requirements for sflow, on page 2 Prerequisites
NEMO 3.0 Product Description NetAxis Solutions
NEMO 3.0 Product Description NetAxis Solutions Page i of 18 NEMO 3.0 Product Description NetAxis Solutions Release Version 3.0 Copyright 2017-2018 NetAxis Solutions Page ii of 18 NEMO 3.0 Product Description
SR-TE On Demand LSP. The SR TE On demand LSP feature provides the ability to connect Metro access rings via a static route to the
The SR TE On demand LSP feature provides the ability to connect Metro access rings via a static route to the destination. The static route is mapped to an explicit path and that will trigger an on demand
Configuring Dynamic ARP Inspection
Finding Feature Information, page 1 Restrictions for Dynamic ARP Inspection, page 1 Understanding Dynamic ARP Inspection, page 3 Default Dynamic ARP Inspection Configuration, page 6 Relative Priority of
OSBRiDGE 24XL(i) Configuration Manual. Firmware 2.05b9
OSBRiDGE 24XL(i) Configuration Manual Firmware 2.05b9 1. Initial setup and configuration. OSBRiDGE 24XL devices are configurable via WWW interface. Each device uses following default settings: IP: 192.168.1.250
IPv6 Firewall Support for Prevention of Distributed Denial of Service Attacks and Resource Management
IPv6 Firewall Support for Prevention of Distributed Denial of Service Attacks and Resource Management IPv6 zone-based firewalls support the Protection of Distributed Denial of Service Attacks and the Firewall
Shortest Path Bridging for MAC
Shortest Path Bridging for MAC In This Chapter This section describes advanced shortest path bridging for MAC configurations. Topics in this section include: Applicability on page 556 Overview on page
Global Interface Commands on the Cisco ASR 9000 Series Router
Global Interface Commands on the Cisco ASR 9000 Series Router This module provides global command line interface (CLI) commands for configuring interfaces on the Cisco ASR 9000 Series Aggregation Services