Product Line Matrix: Instant Access Points. 100 Series Instant APs. 90 Series Instant APs

Transcription

1 PRODUCT LINE MATRIX: Instant Access points RAP- Applications Description Secure n wireless and wired networking for SMBs and access to corporate resources from branch offices. It is is ideal for ultra-high-density Wi-Fi environments that require fast encrypted throughput. (2.4-GHz radio) 3x3 MIMO, 450 Mbps (5-GHz radio) Two internal for 2.4 GHz and three internal for 5 GHz uplink, four Gigabit Ethernet local ports, one USB port n indoor APs maximize mobile device performance in extremely high-density Wi-Fi client environments. 3x3 MIMO, 450 Mbps Two Gigabit Ethernet ports Affordable indoor n APs for high-density deployments in offices, hospitals, schools, retail stores and warehouses. port Entry-level indoor n APs for lowdensity deployments in offices, hospitals, schools and retail stores. port Secure n wireless and wired networking for SMBs and access to corporate resources from branch and home offices. One Gigabit Ethernet uplink, one 10/100BASE-T port, one USB port Secure wired and n wireless network access for branch, teleworker and other remote office locations. Two internal Three 10/100BASE-T ports and one USB port n AP for outdoor areas, storage yards, warehouses, container and transportation facilities, industrial production areas and other harsh environments. Controllerless outdoor AP External quad antenna connectors One Gigabit Ethernet port Spectrum analysis No (hardware capable) Yes Yes Yes No (hardware capable) No (hardware capable) Yes Number of radios single radio single radio Operating frequencies to GHz or to GHz

2 RAP- DFS support Yes (ETSI/EU and MKK/ Yes Yes Yes Yes (ETSI/EU and MKK/ Not Applicable Yes (ETSI/EU and MKK/ Wi-Fi client optimization RF management Aruba ClientMatch technology eliminates sticky clients by continuously gathering session performance metrics from mobile devices and using this information to intelligently steer each one to best AP and radio on the WLAN. Proactive and deterministic, ClientMatch dynamically optimizes Wi-Fi client performance, even while users roam and RF conditions change. If a mobile device moves out of range of an AP or RF interference impedes performance, ClientMatch automatically steers it to a better AP. Adaptive Radio Management (ARM) provides dynamic, application-aware channel management to maximize network capacity and ensure fairness in bandwidth availability per user. Capabilities include adaptive power and channel assignments, coordinated access to a single channel, airtime fairness, airtime performance protection and coverage-hole detection. In addition, spectrum analysis remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference. This provides visibility into non RF interference sources and their effect on channel quality. Number of BSSIDs Up to eight Up to eight Up to eight Up to eight Up to eight Up to eight Up to eight Antennas 2.4 GHz: Two integrated for gain of 3.0 dbi 5 GHz: Three integrated for 3x3 MIMO gain of 3.0 dbi AP-134: Three RP-SMA dual-band with 3x3 MIMO AP-135: Six integrated with 3x3 MIMO AP-104: Four RP-SMA interfaces (two per band) for external 2.4-GHz and 5-GHz with AP-105: Four integrated dualband dipole with AP-92: Two RP-SMA dual-band with AP-93: Two integrated dual-band with RAP-108: Four RP-SMA dual-band RAP-109: Four integrated for gain of 3.0 dbi in 2.4 GHz and 5 GHz. Built-in are optimized for vertical orientation Two integrated omnidirectional antenna elements with Four N-type interfaces (two per band) for external 2.4-GHz and 5-GHz with Network interfaces ENET0 (uplink): One ENET1-4 (local): Four Two 100/1000BASE-T and MDI/DX One autosensing link speed One autosensing link speed ENET0 (uplink): One autosensing link speed and MDI/MDX ENET1 (local): One 10/100BASE-T Ethernet (RJ-45), auto-sensing link speed Three 10/100BASE-T One USB 2.0 Type A to connect with 3G/4G networks One Other interfaces Console interface (custom) Console interface (RJ-45) Console interface (RJ-45) Console interface (RJ-45) Console interface (RJ-45) Console interface (custom) Console interface (USB)

3 RAP- Power over Ethernet (PoE) interfaces P only: 802.3af or 802.3at power sourcing support (PSE) provided two local Ethernet ports Device capable of supplying one full 802.3at power or two full 802.3af power 48V DC 802.3af or 802.3at or PoE+ interoperable with intellisource PSE sourcing intelligence (both ports) 48V DC 802.3afcompatible 48V DC 802.3afcompatible 48V DC 802.3af or 802.3at or PoE+ compatible (USB port disabled when using 802.3af PoE) WN: No WNP: Optional 802.3af PoE (15.4 watts) on the E2 port AP-175P: 802.3atcompatible PoE input (PD) AP-175AC and DC: 802.3af-compatible PoE output (PSE) DC power interfaces : 12V, 2A 12V, 1.25A 12V, 1.25A 12V, 1.25A 12V, 1.25A WN: 12V, 1.25A AP-175DC: 12-48V P: 54V, 1A WNP: 48V, 0.75A AC power interfaces V V AP-175AC: V Power consumption Without USB device connected: 17.5 watts 15 watts (maximum) 12.5 watts (maximum) 10 watts (maximum) Without USB device connected: 12.5 watts WN: 4 watts/6.5 watts AP-175P: 18 watts (maximum) With USB device: 20 watts When sourcing PoE power (P only), total power consumption may increase by up to 33 watts With USB device: 15 watts WNP: 5.5 watts/8 watts/26 watts Environmental Class Indoor Indoor, plenum-rated Indoor, plenum-rated Indoor, plenum-rated Indoor Indoor Outdoor Operating temperature AP-175P: -30 C to +60 C (-22 F to +140 F) AP-175AC and DC: -40 C to +55 C (-40 F to +131 F) Part numbers Remote Access Point (wireless, 5x10/100/100BASE-T, USB) P Remote Access Point (wireless, 5x, USB, ) AP-134: a/n and b/g/n, antenna connectors AP-135: a/n and b/g/n, integrated Note: Units ship with flat-ceiling rail mount adapters AP-104: a/n AP-105: a/n integrated AP-92: a/n or b/g/n with AP-93: a/n or b/g/n with integrated RAP-108: a/n RAP-109: a/n integrated WN: b/g/n wireless, three 10/100BASE-T, USB WNP: b/g/n wireless, three 10/100BASE-T, USB, AP-175P: PoE powered AP-175AC: AC powered, AP-175DC: DC powered,

4 RAP- Part numbers Accessories AP-CBL-SER RAP serial adapter cable (proprietary to DB9 female) AP-130-MNT wall-mount bracket AP-105-MNT and AP-105-MNT-DC wallmount cradle brackets AP-105-MNT-C ceiling-tile rail adapter AP-90-MNT RAP-100-MNT wall and ceiling mount kit WN-MNT wall mount AP-CBL-SER console cable AP-LAR-1 lightning surge arrestor AINS2KKIT-00 outdoor installation kit CBL-AC-NA outdoor AC power cable, North America CBL-AC-INTL outdoor AC power cable, international CBL-DC-WW outdoor DC power cable CKIT-AC-M weatherproof AC power connector kit CKIT-DC-M weatherproof DC power Attachable Not supported AP-134: Yes see AP-104: Yes see AP-92: Yes see RAP-108: Yes see Not supported Yes see AP-135: Not supported AP-105: Not supported AP-93: Not supported RAP-109: Not supported AC power adapters Adapter ships with unit Spares: AP-AC-12V24UN 12V adapter () AP-AC-54V54 54V adapter (P) AP-AC-UN 12Vdc universal AC power adapter kit (wall plug style) 12Vdc AC power adapter (desktop, inline style). Does not include country specific power cord Adapter ships with unit Spares: 12V adapter (WN) AP-AC-48V36 48V adapter (WNP) PoE midspan injectors PD-3501G-AC PD-3501G-AC PD-3501G-AC PD-3501G-AC PD-9001GO

5 RAP- Product warranty Limited lifetime Limited lifetime Limited lifetime Limited lifetime Limited lifetime Limited lifetime One-year parts and labor Minimum software version Aruba InstantOS Aruba InstantOS 3.0 Aruba InstantOS 1.0 Aruba InstantOS 1.0 Aruba InstantOS Aruba InstantOS Aruba InstantOS [1] Concurrent operation of both radios in the same frequency band (2.4 GHz and 5 GHz) is not supported Crossman Avenue. Sunnyvale, CA ARUBA Tel Fax info@arubanetworks.com 2013 Aruba Networks, Inc. Aruba Networks trademarks include AirWave, Aruba Networks, Aruba Wireless Networks, the registered Aruba the Mobile Edge Company logo, Aruba Mobility Management System, Mobile Edge Architecture, People Move. Networks Must Follow, RFProtect, and Green Island. All rights reserved. All other trademarks are the property of their respective owners. Matrix_InstantAPs_051413