This case is made only for computer assembling and indoor use.

Transcription

1 M-908 Manual

2 Thank you for buying a case from Inter-Tech. You got a high-quality case with a lot of individual controllable light effects and plenty space for large graphics adapter and hard disks. This case is made only for computer assembling and indoor use. We recommend to read this manual carefully and to connect fans and controler as per description. We assume no liability for damages caused by nonobservance of this manual. Keep this manual for later use. Make sure that the case is isolated from electric grid when working on it. Because LED work with less voltage the current is higher to get the same wattage. Therefore the fire hazard increases in case of improper installation or use. Ensure that all cables are correct strong and connected before starting the computer. In case of strange noise, smell or smoke, cut the connection to the electric grid immediately. We recommend to separate the computer from the electric grid in case of longer non-use. If you want to dispose your computer, don t dispose it with normal waste. Please bring it to the special collection points for electric waste. Please ask you municipality for that. Cardboard and plastics from packaging can be disposed in the appropriate waste container of household garbage. We grant the implied warranty for this product. In case of warranty claim, please contact your dealer. The complete warranty terms are shown on our website

3 Specification Color Black Dimension 210(w)x527(h)x512(d)mm Material Steel/ABS M/B Type E-ATX/ATX/Micro-ATX/ITX 5.25" device 0 HDD 3.5 HDD*3/2.5 SSD*3 Slots 7 Slots, supports VGA cards up to 420mm max. height CPU cooler 170mm Opt. fans Top: 120mm*3/140mm*2 (optional) Front Back side Top Front: 120mm*2 (optional) Rear: 120mm*1 (optional) Dust filter Buttom*1; Top*1 Front connectors USB3.0*2,USB2.0*2 HD Audio/MIC RGB+PWM control 5x RGB LED 5x Speed control Power supply (optional) Standard ATX PSU Buttom Side

4 Components 1 Front panel 2 Right side panel 3 Left side panel 4 Top 5 Dust filter, top 6 Fan 7 Fan 8 Fan, optional 9 Power supply,opt Mainboard, optional DVD, optional 12 HDD, optional 13 SSD, optional 14 Dust filter, buttom 15 Stands 16 RGB+PWM control 16

5 Front connectors USB3.0 M/B I/O connector Fan cintrol Fan control Reset Switch M/B connector Power LED M/B connector HDD LED M/B connector Power Switch M/B connector LED connector USB2.0 M/B connector H/D Audio M/B connector

6 Power supply mounting Insert Power supply Cleaning dust filter Fix it with screws Mainboard mounting HDD mounting 3,5" clip 2,5" fix with screws Remove tray Remove it to the back Fix 3,5" with screws on the buttom

7 2,5" Hard disk mounting SSD possibility 1+2 Loosen the screw and remove tray Fix SSD with screws onto the tray Place tray Fix it with screws from outside Fix it again SSD possibility 3+4 Hold SSD

8 Cable plugs HDD LED M/B connector POWER LED M/B connector Reset S/W M/B connector Power S/W M/B connector 4pin Molex connector for manual fan control 3pin Fan-plug for manual fan control

9 Mounting water cooling Possibility 1: Fix the radiator at the rear fan position Possibility 2: Place the radiator behind the front panel and fix it with screws. Dimension water cooling: Front : 240/360mm Top: 280/360mm Back side: 120mm Possibility 3: Place the radiator at the top and fix it with scews buttom-up.

10 Graphics card holder Mount the graphics card. Adjust the holder according to the build-in graphics card. 1. Height: Loose screw 1, adjust bracket A and fix it. 2. Depth: Loose screws 2+5, adjust bracket C and fix it. 3. Side: Loose screws 3+4, adjust bracket B and fix it.

11 Connection of fan and RGB lightning You have different possibilities to connect and control fans: 1. Adjustable switch at the top of the case You can connect up to 3 fans with 3pin connector to each slider at the top of the case. You can control the fan speed in three steps, Off, 50%, 100%. You can connect also illuminated fans to these sliders, but you can controil the color with these sliders. 2. Mounted controller The included controller, at the back side of the mainboard holder can control up to 5 fans with 3pin connector. Fans can be connected to the mainboard via the controller, to be controlled by mainboard. You can connect RGB fans with 4 pin connector to the controller to switch them with the switch at the side of the case.

12 Connection to the controller 1-5 Combined 3Pin connector for fan and 4Pin connector for RGB light 6 Input for PWM signal from Mainboard (CPU fan connector) 7 Power input (Floppy plug) 8 Connection for switch You can connect 4pin RGB fans as well as normal RGB strips Please take care of the connection scheme. Wrong connection can damge the controller. After switch on the computer the light control is in Off-mode. Press the switch once to switch on. All LEDs will shine white first. Each push onto the switch will change the mode. The following modes are available: White, Blue, Yellow, Red, Green, Orange, Purple, Fading, Flashlight with color change. To switch off the light press the switch for more than 3 seconds. FAQ Computer restarts always The switch don t work. Neither fan nor light works. Check if the Mainboard CPU Fan connector is connected to plug 6 of the controller Check if the switch is connected to plug 8 of the controller. Check if plug 7 of the controller is connected to the power supply and the power supply is on. Inter-Tech Elektronik Handels GmbH - Hainhäuser Weg Langenhagen - Germany -