D4-6U CompactPCI Pentium 4 SBC

Transcription

1 D4-6U CompactPCI Pentium 4 SBC Mobile Pentium 4 up to 2.2GHz 1-slot CompactPCI 64-bit/66MHz PXI system controller 1GB DRAM, CompactFlash Graphics controller/digital video output 2 Gigabit Ethernet (front) 1 Gigabit Ethernet (PICMG 2.16) - depending on model 3 USB 2 COMs, IDE, floppy, parallel, keyboard/mouse 1 PMC or 2 PC-MIP mezzanine slots With the Mobile Pentium 4 processor, the 845G chipset technology (400MHz local bus frequency) and its 64- bit/66-mhz bridge to the CompactPCI bus (32-bit/33- MHz on board), the 6U Single-Board Computer D4 is based on a powerful computing core. Standard versions come with the 1.7 GHz and 2.2 GHz processors from the Intel "Embedded Line". The D4 can operate as a system-slot card for any CompactPCI or PXI system, with the system slot capable of being placed either left or right in the enclosure. The 1-slot D4 supports full hot swap and is compatible with PICMG 2.16 and the requirements of a server blade. The 845G chipset supports up to 1 GB of 200-MHz DDRAM. Application code is conveniently stored in a scalable CompactFlash which is controlled via IDE. A second IDE channel allows direct connection of an onboard 2.5" hard disk. The chipset also features a DVI graphics controller which allows for attachment of both advanced and legacy flat-panel displays and CRT monitors. Three onboard USB ports provide universal interfaces to a variety of peripheral devices (such as keyboard, mouse, printer, modem, or camera). For high-speed networking and field bus interfacing, the D4 features two or three Gigabit Ethernet lines (depending on the model). Further interfaces include two COMs, keyboard/mouse, floppy and parallel ports. DVI, keyboard/mouse, 2 Gigabit Ethernet, 1 USB and 1 COM are conveniently available at the front panel of the D4. All the other functions are available via the rear I/O adapter. The rear I/O adapter is compatible with that of the MEN D2 CPU board (Pentium MMX SBC) to provide an easy upgrade path from D2 to D4. Further flexible I/O extension is provided by using the two PC-MIP slots or one PMC slot on the D4 CPU board. The mezzanine signals are provided at the front or via the rear I/O adapter. The Phoenix BIOS on the D4 was especially designed for embedded system applications. 1

2 Technical Data CPU Pentium 4 Mobile Processor 1.2 to 2.2GHz processor core frequency MPGA478 Socket 845G Chipset 400MHz local bus frequency Memory Up to 1GB SDRAM system memory One 144-pin SO-DIMM slot for SDRAM modules DDR 200MHz memory bus frequency 8 Mbits BIOS Flash firmware hub CompactFlash card interface Via on-board IDE Type I/II, Microdrive True IDE Mass Storage Fast IDE ports Primary IDE hard-disk/cd-rom port; either via rear I/O (40-pin ribbon-cable connector U-DMA66) or on-board hard disk Secondary IDE port for local CompactFlash (or 44-pin ribbon cable connector) Graphics Integrated in 845G chipset DVI connector at front panel I/O USB One USB 2.0 at front (Series A connector) Two USB 2.0 at rear Data rates up to 480Mbits/s Ethernet Two 10/100/1000Base-T Ethernet at front panel One 10/100/1000Base-T Ethernet at rear (2.16) RJ45 connector at front panel Supports network boot (depending on BIOS version) One RS232 UART (COM1) RJ45 connector at front panel Handshake lines: CTS, RTS; DCD, DSR, DTR One UART (COM2) Via on-board ribbon cable or rear I/O Physical interface at front panel or using SA-Adapter via 10-pin ribbon cable on I/O connector, depending on board version RS232..RS485, isolated or not: for free use in system (e. g. cable to front) Handshake lines: CTS, RTS; DCD, DSR, DTR; RI (with rear I/O) AC'97 audio Accessible via on-board connector PS/2 keyboard/mouse PS/2 connector at front panel GPIO Accessible via on-board connector 8 I/O lines Front Connections DVI One USB 2.0 (Series A) Two Ethernet (RJ45) One RS232 UART COM1 (RJ45) One PS/2 keyboard/mouse Two PC-MIP slots or one PMC slot Rear I/O Dual USB 2.0 Ethernet 10/100/1000Base-T RS232 UART COM2 IDE interface GPIO lines Floppy disk interface LPT interface Mainly compatible with D2 board Mezzanine Slots Two PC-MIP slots Compliant with PC-MIP specification Type I/II slots Or: One PMC slot Compliant with PMC standard IEEE Up to 64-bit/64-MHz, 3.3V V(I/O) PMC I/O module (PIM) support through J4 Miscellaneous Real-time clock Watchdog timer Temperature measurement User LEDs Reset button CompactPCI Bus Compliance with CompactPCI Core Specification PICMG 2.0 R3.0 System slot; peripheral slot available on request 66-MHz/64-bit PCI-to-PCI Bridge V(I/O): +5V (+3.3V tolerant) CompactPCI hot-swap support compliant with CompactPCI Hot Swap Specification PICMG 2.1 R2.0 Blue LED at front Compliance with CompactPCI Packet Switching Backplane PICMG 2.16 R1.0 2

3 Technical Data PXI Prepared for eight trigger lines compliant with PXI Specification R1.0 Available on request Electrical Specifications Supply voltage/power consumption: +5V (-3%/+5%), 0.9A (1.7 GHz, modest load), 5.4A (1.7 GHz full load), 1.1A (2.2 GHz, modest load), 7.2A (2.2 GHz, full load) +3.3V (-3%/+5%), 2.2A (1.7 GHz, modest load), 2.9A (1.7 GHz full load), 2.2A (2.2 GHz, modest load), 2.9A (2.2 GHz, full load) MTBF: 20 C (derived from MIL-HDBK-217F) Mechanical Specifications Dimensions: conforming to CompactPCI specification for 6U boards Weight: 530g Environmental Specifications Temperature range (operation): C or C Industrial temperature range on request Airflow: min. 10m³/h Temperature range (storage): C Relative humidity (operation): max. 95% non-condensing Relative humidity (storage): max. 95% non-condensing Altitude: -300m to + 3,000m Shock: 15g/11ms Bump: 10g/16ms Vibration (sinusoidal): 2g/ Hz Conformal coating on request Safety PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers EMC Tested according to EN (radio disturbance), IEC (ESD) and IEC (burst) with regard to CE conformity BIOS Phoenix BIOS Software Support Windows 2000/XP Linux VxWorks QNX (on request) RTX (on request) 3

4 Diagram 4

5 Configuration & Options Standard Configurations Article No. CPU Type Clock System RAM CFlash Mezzanine Slots Operation Temperature 02D P4 Mobile 2.2 GHz 0 MB 0 MB 1 PMC C 02D P4 Mobile 1.7 GHz 0 MB 0 MB 2 PC-MIP C 02D P4 Mobile 1.7 GHz 0 MB 0 MB 1 PMC C 02D P4 Mobile 2.2 GHz 0 MB 0 MB none C 02D P4 Mobile 2.2 GHz 0 MB 0 MB 1 PMC C Options CPU Type P4 Mobile Clock 1.2 GHz 1.7 GHz 2.2 GHz Memory System RAM 256 MB, 512 MB or 1 GB CompactFlash 0 MB up to maximum available Mezzanine Slots 1 PMC 2 PC-MIP PXI Eight trigger lines compliant with PXI Specification R1.0 Operation Temperature C C Depends on board configuration (CPU, mezzanines...) 5

6 Ordering Information Standard Hardware 02D Pentium 4 / 2.2GHz, system slot, 1 PMC slot, C 02D Pentium 4 / 1.7GHz, system slot, 2 PC-MIP slots, C 02D Pentium 4 / 1.7GHz, system slot, 1 PMC slot, C 02D Pentium 4 / 2.2GHz, system slot, prepared for on-board hard disk, C 02D Pentium 4 / 2.2GHz, peripheral slot, 1 PMC slot, C 08SA SA03-01 Systems & Card Cages RS232, optically isolated, C RS232, optically isolated, C screened CompactPCI 19" 3U/84HP rack-mount enclosure for 6U cards (horizontal), 6-slot 3U backplane, system slot left, 250W ATX wide-range PSU, 2 fans, prepared for rear I/O Memory CompactFlash card, 512MB, Type I, C CompactFlash card, 512MB, Type I, C CompactFlash card, 256MB, Type I, C CompactFlash card, 256MB, Type I, C CompactFlash card, 2GB, Type I, C, fixed MB DDRAM C for 02D MB DDR RAM C for 02D MB DDR RAM C for 02D MB DDR RAM C for 02D GB DDR RAM C for 02D GB DDR RAM C for 02D MB DDR RAM C for 02D MB DDR RAM C for 02D GB DDR RAM C for 02D MB DDR RAM C for 02D MB DDR RAM C for 02D GB DDR RAM C for 02D MB DDR RAM C for 02D SA-Adapters 08SA SA SA SA02-07 RS232, not optically isolated, C RS422/485, half duplex, optically isolated, C RS422/485, full duplex, optically isolated, C RS422/485, full duplex, optically isolated, C screened Miscellaneous 05A Keyboard/mouse Y-cable 0.1m, 6-pin Mini DIN plug to two 6-pin Mini DIN receptacles 05F RS232 interface cable 9-pin D-Sub plug to 8-pin RJ45 plug, 2m 05F DVI-to-VGA cable, DVI plug to 15-pin HD-Sub plug, 2m, C 05F Adapter, DVI analog plug to VGA 15-pin HD-Sub receptacle, C DVI-I to DVI-D and VGA Y-adapter cable (for example for D4, F7/N, F8, F9, P17) IDE hard disk 2.5", 9.5mm, 20GB; for mounting on-board (harddisk mounting kit may be additionally required) 08CT02-02 CompactPCI rear I/O transition module 6U/80mm, I/O connection for D4 CompactPCI CPU board, C Software: OS independent 13Z MDIS4 /2004 low-level driver sources for F7/F7N/F9/D4/EM2 watchdog Software: Windows 10D Windows 2000/XP driver package for MEN's D4; graphic driver for the 845 chipset (win2k_xp131.exe), Gigabit Ethernet driver for the chip (pro2kxpm.exe) 13Z MDIS4 /2004 Windows NT4/W2K/XP and XP Embedded driver for F7/F7N/F9/D4/EM2 watchdog Software: VxWorks 10D VxWorks 5.5/5.5.1 Tornado 2.2/2.2.1 BSP for MEN D4 6

7 Ordering Information Documentation 20ABMX-00 20APPN001 20CT02-00 Phoenix BIOS user manual Application Note: Using MEN +5V CompactPCI Boards with +3.3V V(I/O) CT2 user manual 20D D4 user manual For the most up-to-date ordering information and direct links to other data sheets and downloads, see the D4 online data sheet under» Germany MEN Mikro Elektronik GmbH Neuwieder Straße Nuremberg Phone Fax France MEN Mikro Elektronik SA 18, rue René Cassin ZA de la Châtelaine Gaillard Phone +33 (0) Fax +33 (0) USA MEN Micro, Inc. PO Box 4160 Lago Vista, TX Phone (512) Fax (512) The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright 2006 MEN Mikro Elektronik GmbH. All rights reserved. 7