PCM-4153-A2 PC/104+ SBC w/amd LX800, VGA, LCD, Dual LAN, USB 2.0, On-board Flash and Memory Startup Manual

Transcription

1 PCM--A PC/0+ SBC w/amd LX800, VGA, LCD, Dual LAN, USB.0, On-board Flash and Memory Startup Manual Packing List Specifications Before you begin installing your card, please make sure that the following items have been shipped: x PCM- SBC x AT Power cable (p/n:700009) x Audio cable (p/n: ) x Four COM cable (p/n:70008) X RS-/8 COM cable (p/n:70007) x Keyboard/Mouse cable (p/n:70000) x Y cable (for KB/MS extention) (p/n:700000) x Ethernet RJ- Conn. (p/n:700008) conversion cable x LPT port cable (p/n:70000) x IDE cable (p/n:7000) x VGA cable (p/n: ) x USB cable (p/n:7000) (bracket type with two USB ports) x Startup manual x CD-ROM (Manual, Driver, Utility) If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Note : Note : For detailed contents of PCM--A, please refer to information on the enclosed CD-ROM (in PDF format). Acrobat Reader is required to view any PDF file.acrobat Reader can be downloaded at: html (Acrobat is a trademark of Adobe) For more information on this and other Advantech products, please visit our website at: For technical support and service, please visit our support website at: This manual is for the PCM- Series Rev. A Part No. 000 Print in China nd Edition, April 009 Standard SBC Functions CPU: AMD Geode LX800 processor, up to 00 MHz System Memory: On-board memory DDR SDRAM MB nd Cache Memory: 8 KB on the processor System Chipset: AMD Geode LX800 BIOS: Award Mbit Flash BIOS Watchdog Timer: levels timer interval Expansion Interface: PC/0+ Battery: Lithium V / 9 mah Power management: ACPI supported Enhanced IDE interface: One channel supports one EIDE device (another is used for on board IDE Flash). BIOS auto-detect, PIO Mode or Mode, supports UDMA mode Flash: onboard GB Flash (IDE interface) Serial ports: Four serial RS- ports in one pinheader 0 pin connector (CN0: COM///). RS- and RS- 8 in one pinheader and can be configured via CN9 connector Parallel port: One parallel port, supports SPP/EPP/ECP mode Keyboard/mouse connector: Supports one standard PC/AT keyboard and a PS/ mouse Audio: Supports AC97 Audio stereo sound USB: Four USB.0 compliant universal serial bus ports GPIO: 8 bit general purpose Input/Output VGA/LVDS Interface Memory Size: Optimized Shared Memory Architecture, supports up to MB frame buffer using system memory Resolution: CRT resolution: up to 00 x 00 x bpp at 00 Hz and up to 0 x 78 x bpp at 0 Hz for TFT LCD LCD interface: Supports up to -bit TFT LCD (TTLsignal) Dual Simultaneous Display: CRT+LCD Ethernet interface Chipset supports: x 0/00Mbps - Intel 8ER Ethernet interface: IEEE 80.u (00 BASE-T) protocol compatible Connector: Two internal box headers Audio Function Audio controller: Realtek ACL0 chipset, supports AC97 D Audio stereo sound Audio Interface: Microphone in, Line in, Line out PCM--A Startup Manual

2 Specifications Jumpers and Connectors Mechanical and Enviromental Dimensions (L x W): 9 x mm (.77 x.0 ) Mechanical Drawing (dxf file) is available. Power Supply Type: AT Power Requirement: + V ± %, + V ± % (Optional), ( V only, V optional for PC0 add on card and LCD inverter) Power Consumption: (Geode LX800, MB DDR) Max load: + V@. A, + V@ 0.0 A Idle mode: + V@.7 A, + V@ 0.0 A Conditions: Test software: Hot CPU pro. Power on - Boot: Measure the maximum current value of between system power on and boot-up to O.S. Max. load: Measure the maximum current value which system under maximum load (CPU: Top speed, RAM & Graphic: Full loading) Idle mode: Measure the current value when system in windows mode and without running any program Operating temperature: 0 ~ 0 C ( ~ 0 F) ( operation humidity: 0 8% RH Non-Condensing) Extended temperature support: -0 C - 80 C: PCM-FZ-L0AE -0 C - 8 C: PCM-FZ-L0AE Weight: 0.8 kg (reference weight of total package) The board has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the jumpers an connectors. Jumpers/Switch Setting Label J J J J CN9 Connectors Label CN CN CN CN CN Function DOTREF Select Clear CMOS Flash Master/Slave Select PCI VI/O Power Selector COM Setting Function ATX Feature Power Connector (optional) TFT LCD I/F Inverter Power SMBus IDE CN USB/ / CN7 USB / CN8 CN9 CN0 CN CN CN7 CN0 CN CN CN CN CN8 KB/MS Print Port RS/8 ISA -V & -V Input LAN / CN LAN CRT COM/// AT Power / Reset / Buzzer Pin Header Battery Connector AUDIO-OUT / CN AUDIO-IN GPIO / CN7 GPIO Power Input PCM--A Startup Manual

3 Jumpers and Connectors Software Installation J: DOTREF Select (-) External NL Internal The CD disc contains a driver installer program that will guide you through the installation of various device drivers needed to take full advantage of your CPU card. Caution! The computer is provided with a battery-powered Real-time Clock circuit. There is a danger of explosion if the battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer. Discard used batteries according to manufacturer s instructions. J: Clear CMOS (-) BAT (default) (-) Clear CMOS CN9: COM Setting (-) RS- (default) (-) RS-8 (-) RS- This device complies with the requirements in Part of the FCC rules. Operation is subject to the following two conditions:.. Declaration of Conformity This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. J: Flash Master/Slave Select (-) Slave (default) (-) Master J: PCI VI/O POWER (-) With + V (-) WIth +. V (default) PCM--A Startup Manual

4 Figure : PCM- location connectors & Jumpers (component side) CN7 CN Figure : PCM- location connectors (solder side) PCM--A Startup Manual

5 Figure: PCM- mechanical drawing (component side) Figure : PCM- Mechanical Drawing (solder side) PCM--A Startup Manual