Accessories. Accessories GSA SIN REFERENCE EMERGE PREFIX

Transcription

1 GSA SIN REFERENCE EMERGE PREFIX provide the final touch when specifying new or reconfiguring existing office furniture. Maxon commercial-quality accessories are built to enhance individual workstation efficiency by adding comfort and flexibility, allowing individuals to place their equipment where it best meets their particular ergonomic needs. Our products support years of use and are backed by our limited lifetime warranty. SMARTSPACE SURPASS WORKSURFACES PREPARE STORAGE SEATING ACCESSORIES INDEX 321

2 GSA SIN INDEX ACCESSORIES SEATING STORAGE PREPARE WORKSURFACES SURPASS SMARTSPACE PREFIX EMERGE REFERENCE Power/Data Modules Clamp On Worksurface 6' Power cord. UL Listed. adapters to allow use of commercially available data terminals or blanks to fill unused openings. Many of the AMP, AT&T, Krone, Leviton and most commercial data terminals can be used. Available in Loft. Fits on any worksurface with a 4 overhang. Power/Data Modules Clamp On Worksurface Must be installed at time of initial worksurface installation if installing between a worksurface and panel. 6' Power cord. UL Listed. The USB hub allows simultaneous powering of 2 USB-A devices. The USB hub is a charger only, no ability to connect to a PC. The charging capacity is limited and may not charge all devices. Color finishes available: Storm (STRM) and Snow (SNW). Fits on any worksurface with a 4 overhang. Power/Data Modules Under Worksurface 6' Power cord. UL Listed. Color finishes available: Storm (STRM) and Snow (SNW). Works with any top that has a 5 x 5 square clearance. Center Drawers Black polymer center drawers feature pencil trays with three compartments for storage. Center drawers will not fit in center of 24"D worksurfaces which are wider than 60" due to location of center support bracket. Opening Requirements: 23"W x 16 1 /4"D x 2"H. Retracts on 16" ball bearing slides. Can store up to 25 lbs. Coat Hook Hangs directly into slotted Emerge or Prefix panel frame. Use for coat or bag. Package of six. Available in black only. Shelf Organizer Fits all Universal Overhead Cabinets and Shelves. Not compatible with Overhead Cabinets with Sliding Doors. CPU Holder Features 360 swivel with 13 1 /2" ball bearing glide track. Load capacity 55 lbs. Fits CPUs 5" to 20" in overall height and 3" to 6" in width. Height adjustable from 16" to 23" below worksurface. No tools required to make adjustments. Features a textured, silver paint finish. CPU Holders should not be used with Height-Adjustable T-Bases and can only be specified for use with 30"D C-Leg Height-Adjustable Bases. Metal Corner Sleeves 22 1 /2"W leading edge x 18"D. Corner sleeves connect intersecting worksurfaces to create corner desk work areas. All corner sleeves have pre-drilled holes to allow attachment of articulating keyboard platforms. 322

3 GSA SIN Lift and Lock Articulating Arm and Platform Features 21" Glide Track intuitive lift and lock height and tilt mechanism. Provides 7" of height adjustment (2 1 /2 above and 4 1 /2 below). Slim, low-profile design that can be positioned flush with the worksurface for an extended workspace. +15 /-15 tilt adjustment and 360 rotation provides support of neutral position of shoulders, arms, and wrists while accommodating multiple working postures. Pairs with a convertible keyboard platform that can be positioned in-line, over, or forward of keyboard platform without the need for tools. detachable leatherette-covered gel palm rest, nonslip pad, mouse pad, mouse guard, and cord management clips. Phenolic material on keyboard platform can be cleaned and sanitized to maintain a bacteria-free environment; articulating arm made of cold-rolled steel is recyclable. Recommended for straight-edge worksurfaces. Overall length fully opened is 28". Sit to Stand Articulating Arm and Platform Features a 23" glide track, 12.7" lift-and-lock height adjustment (5.1" above and 7.6" below). Positive and negative tilt for the best ergonomic positioning. +10 /-20 tilt adjustment and 360 rotation provides support of neutral position of shoulders, arms, and wrists while accommodating multiple working postures. The 19" platform has non-handed mouse tray can be moved from right hand to left hand side. Surpasses ANSI/BIFMA standards. Black powder-coat finish. Twist Lock Articulating Arm and Platform Features as 17" glide track, soft touch knob for simultaneous height and tilt adjustment, spring assisted 6 1 /4" height adjustment (1 1 /4" above and 5" below track). Features soft-touch knob for simultaneous height and tilt adjustments. +10 /-15 tilt adjustment and 360 rotation provides support of neutral position of shoulders, arms, and wrists while accommodating multiple working postures. Accommodates keyboard and mouse on the same level. detachable leatherette-covered gel palm rest, nonslip pad, mouse pad, mouse guard, and cord management clips. Keyboard platform made of 90% post-consumer recycled materials and completely recyclable. Free of formaldehydes and carcinogens and emits no VOCs. Monitor Arms Versatile adjustability with a refined design and effortless, pneumatic fingertip adjustment. Multiple points of adjustment, including 360 swivel at two points, 21" extension and 13" of height adjustment, and a 180 lockout feature. Monitor tilts +30 /-25. Tension adjustment feature at two locations to accommodate monitor weight and desired tilt tension. Maximize use of worksurface with ability to retract to minimal footprint of 3 1 /2", making them ideal for shallow worksurfaces. Model includes grommet and worksurface mounting options. Integrated cable management. Desk clamp mounts to surfaces 7 /8" to 2" thick; grommet mount requires hole diameter of 5 /16" to 2" wide, and accommodates surfaces up to 2" thick. Single arm supports 6 1 /2 to 18 lbs.; dual arm offers perfect horizontal alignment, and each arm supports 6 1 /2 to 18 lbs. VESA 75mm and VESA 100mm compatible. Quick release feature simplifies monitor installation and exchanges. Available only in Silver. Heavy Duty Monitor Arm M-ACC-FMHD heavy duty arm supports 7.6 to 44 lbs. in total weight. Single arm features 22 1 /4" extension. Height adjustment range of 9" to 23" (14" total). Features 360 rotation at 3 points. Integrated cable management. Tension adjustment feature at two locations to accommodate monitor weight and desired tilt tension. Quick release feature simplifies monitor installation and exchanges. Monitor rotates 180 and tilts +85 /-35. Available only in Silver. REFERENCE EMERGE PREFIX SMARTSPACE SURPASS WORKSURFACES PREPARE STORAGE SEATING ACCESSORIES INDEX 323

4 GSA SIN INDEX ACCESSORIES SEATING STORAGE PREPARE WORKSURFACES SURPASS SMARTSPACE PREFIX EMERGE REFERENCE Universal Overhead Task Lighting Recessed task lights conserve space and provide an efficient solution for illuminating the workplace. All models are equipped with electronic ballast for longer bulb life and cooler operating temperature. Recessed task light models mount under storage cabinets or shelves to provide optimal space utilization. Models are available in two styles and four sizes to correspond with the width of the cabinet or shelf. Task lights with a fused plug are available to meet Chicago electrical code. Undercabinet LED Light The Undercabinet LED Light is a low profile, linear solution for overhead cabinets and shelves and is an ideal solution for painted wood storage. It utilizes energy efficient LED technology which provides a long life. The Undercabinet LED Light provides the opportunity to mount the fixture where light is needed most. The Undercabinet LED Light features a metal trough reflector with diffuser lens. The light has a sleek 1 2" thick profile and provides two options for mounting, either magnetically or with hardware. Undercabinet LED Lights can be daisy-chained. Optional undercabinet occupancy sensor is available which will automatically turn off the fixture after 30 minutes of no detection and back on immediately as the user re-enters the detection range using Passive Infrared (PR) sensor technology. Unit features 360 lens with 90 outward detection angle, providing a 36" coverage diameter at 18". Occupancy sensor comes with connector and is required to be connected in the sequence shown below. Connect occupancy sensor to a light, or first light in daisy chain to control all linked lights. CONNECTION SEQUENCE* Power Sensor Connector *Cannot deviate from this sequence Task Lighting Light available in Black finish only. Mount under Overhead Storage Cabinet or Shelf. For Chicago Version with fuse plug, order FP option. 6' Cord. Florescent light bulb and hanger bars. Fixture Universal Overhead Task Lighting Recessed task lights are black with a 9' long black cord that is attached to the right rear corner of the fixture. (Color does not need to be specified.) Bulbs are included. RECOMMENDATION: Provide a separate circuit for task lights to ensure proper, long-term operation. 4 cord retainer clips. Shorter width models can be used on wider overheads, shelves and hutches. All models are equipped with electronic ballast for longer bulb life and cooler operating temperature. On/Off switch provides individual control of tasklight within the workstation. Undercabinet LED Lights Low profile energy-efficient LED task light for use with overhead storage cabinets and shelves. 20W power supply for 10W 17" unit (.166 amps). 20W power supply for 20W 31" unit (.166 amps). 60W power supply for daisy chain starter units (.5 amps). Must order one starter unit for each daisy chain application. Specify up to 5 additional 17" interconnect units (M-USLED31AUO) to daisy chain together with 17" daisy chain starter fixture (M-USLED17A). Example: Daisy-chain 4 17" undercabinet LED lights: Specify: 1 M-USLED17A Specify: 3 M-USLED17AUO with 10" jumper cord Specify up to 2 additional 31" interconnect units (M-USLED31AUO) with 10" jumper cords to daisy chain together with 31" tasklight (M-USLED31A); or 17" daisy chain starter fixture (M-USLED17A). 3500K color temperature. 131 footcandles at 18" on M-USLED31AS; 76 footcandles at 18" on M-USLED17AS. Magnetic or screw-mount option attachment hardware included. On 20 watt models, power drive is attached to plug: allow 1 7 8"D space at outlet. On 60 watt models, power drive brick is in center of cord and can be attached to underside of worksurface with velcro mount. 3 cord retainer clips. Meets California Title 24 Energy Efficiency Standards. Instant On switch with infinite dimming cycle from 100% to 15% with the last state memory, allowing the user to set their desired level of lighting. Fixture automatically turns off after 10 hours of use to reduce unwanted energy use. Optional occupancy sensor automatically turns off all interlinked fixtures after 30 minutes of no detection and back on immediately when detection is found. 324

5 GSA SIN Articulating LED Desk Lamp Available in Silver. 9'4" cord is Silver. Full range dimming from 100% 10% with last state memory. Uses 7.7 watts at highest setting and as low as 1 watt at its lowest setting, providing 85 to 12 footcandles of light, respectively (16" above worksurface). 7 1 /2" round swivel base and 16 1 /2"H tilt arm allow versatile positioning of the 13" lampshade. Designed for 50,000 hours of life, providing up to 25 years of daily use. Warranty 5 years (fixture); 3 years (power supply). Color Temperature: 3500K. Color Rendering Index (CRI): 80. Materials: aluminum arm and lampshade, steel base. Weight: 4.4 lbs. 97% recyclable, 76% post-consumer. Certifications: UL and CUL. TAA compliant. Occupancy sensor available with automatic shut-off after 6 minutes if no motion is detected. Small Desktop Lamp 7' power cord Lamp comes in a Silver Finish. Small profile. Base sits on worksurface. Lightweight Energy efficient 3W LED lamp 11.8" reach *Excluded - Not TAA compliant LED Desktop Lamp Light comes with a 9' 4" power cord. Lamp comes in a Silver Finish. Full-range dimming from 10% to 100%. Designed for 50,000 hours of life. Lamp is 15.83" tall. Desk lamp does not articulate at base. The pivoting head provides custom positioning, as it can be twisted 360 degrees. Uses only 5 watts of energy. REFERENCE EMERGE PREFIX SMARTSPACE SURPASS WORKSURFACES PREPARE STORAGE SEATING ACCESSORIES INDEX 325

6 GSA SIN See page 327 for the specification guide. INDEX ACCESSORIES SEATING STORAGE PREPARE WORKSURFACES SURPASS SMARTSPACE PREFIX EMERGE REFERENCE Single Flat Screen Monitor Arm with Effortless Adjustment Monitor Arm. Desk and Grommet mount hardware. Single Flat Screen Monitor Arm with Effortless Adjustment M-ACC-FMED Dual Flat Screen Monitor Arm with Effortless Adjustment Monitor Arm. Desk and Grommet mount hardware. Dual Flat Screen Monitor Arm with Effortless Adjustment M-ACC-FMED Single Flat Screen Heavy Duty Monitor Arm Monitor Arm. Desk and Grommet mount hardware. M - Single Heavy Duty Flat Screen Monitor Arm M-ACC-FMHD

7 GSA SIN MONITOR ARMS Single Dual Single Heavy Duty Features: M-ACC-FMED M-ACC-FMED2 M-ACC-FMHD REFERENCE Monitor rotation Monitor Extension 21" 21" " Monitor retraction 3 1 2" 3 1 2" 3 1 2" Monitor tilt adjustment +30 / / /-25 Arm Height adjustment 6 1 2" to " (13") 6 1 2" to " (13") 9" to 23" (14") Monitor Weight capacity (maximum approved weight) to 18 lbs to 18 lbs. per arm to 44 lbs. Mounting option Desk clamp or grommet included Desk clamp or grommet included Desk clamp or grommet included 360 lockout feature Yes Yes No VESA compatibility 75mm and 100mm 75mm and 100mm 75mm and 100mm Laptop Tray compatible Yes Yes No Tool Tile compatible No No No Maximum width per monitor N/A 25" 25" Worksurface requirements Desk Clamp Worksurface requirements Grommet Mount 7 8" to 2" thick 7 8" to 2" thick 7 8" to 2" thick 7 8" to 2" thick; hole diameter 5 16" to 2" 7 8" to 2" thick; hole diameter 5 16" to 2" 7 8" to 2" thick; hole diameter 5 16" to 2" Environmental info 99% Recycled content 99% Recycled content 99% Recycled content EMERGE PREFIX SMARTSPACE SURPASS WORKSURFACES PREPARE STORAGE SEATING ACCESSORIES INDEX 327

8 GSA SIN INDEX ACCESSORIES SEATING STORAGE PREPARE WORKSURFACES SURPASS SMARTSPACE PREFIX EMERGE REFERENCE See page 329 for the specification guide. All Dimensions are Actual. Sit to Stand Articulating Arm and Platform Sit to Stand Articulating Arm and Platform. Keyboard, mouse antislip pads and gel palm rests. Description Model H D W Wt. Cubes List Sit-to-Stand Articulating Arm and Platform M-ACC-SSKT 1 1 /2" 11 1 /2" 26 1 /2" Lift and Lock Articulating Arm and Platform List and Lock Articulating Arm and Platform. Detachable leatherette wrist support. Description Model H D W Wt. Cubes List Lift-and-Lock Articulating Arm and Platform M-ACC-LLCP 1 1 /2" 11 1 /2" 28" Twist-Lock Articulating Arm and Platform Twist-Lock Articulating Arm and Platform. Detachable leatherette wrist support. Description Model H D W Wt. Cubes List Twist-Lock Articulating Arm and Platform M-ACC-TLBP 1 1 /2" 10 1 /2" 25" M - 328

9 GSA SIN Articulating Keyboard Supports Features M-ACC-LLCP M-ACC-SSKT M-ACC-TLBP REFERENCE Keyboard Support Platform style "W x "D Platform Style 19"Wx11"D Platform style 25"W x "D Keyboard Support Material Phenolic Phenolic Polyethylene Made of 90% post-consumer materials and completely recyclable. Free of formaldehydes and carcinogens and emit no VOCs. Suspension Nylon glides on lubricated slide track Intuitive lift and lock one touch height adjustment Lubricated slide track system: spring assisted Platform Rotation Nylon glides on lubricated slide track system spring assisted Platform Tilt +/- 15 degrees +10/-20 degrees +10/-15 degrees Platform Tilt Adjustment Platform Height Adjustment Range Platform Height Adjustment Palm Rest Mouse Pad Release handle for independent tilt adjustment 7" (2 1 2" above to 4 1 2" below) Can position platform to be flush with worksurface for extended work area Lift platform to raise, lift slightly and tilt back to lower Detachable leatherette-covered gel palm rest Independent tilt and swivel with reversible design; mouse platform clicks in on left or right side, no tools required Convenient tilt wheel assists desired tilt angle Soft touch knob for simultaneous height and tilt adjustment " (7" above to 5 1 2" below) 6 1 4" (1 1 4" above to 5" below) Lift platform to raise, lift slightly and tilt back to lower Fabric covered gel palm rest Circular, swivel, tilt, LH/RH mounting, mouse catcher, gel rest Turn knob to release platform; adjust to desired height and tilt; tighten knob to secure Detachable leatherette-covered gel palm rest In-line to accommodate mouse on same level as keyboard Microsoft Natural Compatible No Yes by removing palm rest Yes by removing palm rest Track Depth 21" 23" 17" Required Mounting Clearance "W x 21"D + 1 4" Recess 19"W x 23"D + 1 4" Recess 25"W x 17"D + 1 4" Recess Adjustable Wrist Rest No Fixed mounting and height No Ideal For Additional Information Multiple users Straight worksurfaces Extensive adjustability with mouse in line, mouse over or mouse forward of keyboard Leatherette-covered palm rests are free of formaldehydes and carcinogens. Can be cleaned and sanitized. Entire palm rest can be removed for thorough cleaning of the platform Installer friendly ship standard with double-sided tape to assist with installation Track can be cut in the field to shorten track depth may affect ability to fully recess platform Corner worksurface applications Sit to stand applications Track can be cut in the field to shorten track depth may affect ability to fully recess platform Shallow worksurfaces Corner worksurface (17" or 21") Radius worksurface (42" or 48") Leatherette-covered palm rests are free of formaldehydes and carcinogens. Can be cleaned and sanitized. Entire palm rest can be removed for thorough cleaning of the platform Installer friendly ship standard with double-sided tape to assist with installation Track can be cut in the field to shorten track depth may affect ability to fully recess platform EMERGE PREFIX SMARTSPACE SURPASS WORKSURFACES PREPARE STORAGE SEATING ACCESSORIES INDEX 329

10 GSA SIN INDEX ACCESSORIES SEATING STORAGE PREPARE WORKSURFACES SURPASS SMARTSPACE PREFIX EMERGE REFERENCE See pages for the specification guide. All Dimensions are Nominal. Center Drawer Description Model H D W Wt. Cubes List Pre-Formed Low Profile Drawer (Black Plastic) M-CD1 2 1 /8" 19 1 /8" 22" Worksurface Mounted CPU Holder Description Model H D W Wt. Cubes List Worksurface Mounted CPU Holder (Silver Finish) M-ACC-UWCPU 16-22" 12" " M - 330

11 GSA SIN See pages for the specification guide. All Dimensions are Actual. Task Lighting Fluorescent light bulb, 6 foot cord, 4 cord clips, mounting bars. Description Wattage Model H D W Wt. Cubes List Task Light 24W or greater 15 M-USL " 6.875" 18.3" Task Light 30W or greater 20 M-USL " 6.875" 24.3" Task Light 42W or greater 30 M-USL " 6.875" 36.3" Task Light 54W or greater 40 M-USL " 6.875" 48.3" Task Light 24W or greater-fuse Plug 15 M-USL24FP 1.425" 6.875" 18.3" Task Light 30W or greater-fuse Plug 20 M-USL30FP 1.425" 6.875" 24.3" Task Light 42W or greater-fuse Plug 30 M-USL42FP 1.425" 6.875" 36.3" Task Light 54W or greater-fuse Plug 40 M-USL54FP 1.425" 6.875" 48.3" M - REFERENCE EMERGE PREFIX SMARTSPACE SURPASS WORKSURFACES PREPARE STORAGE SEATING ACCESSORIES INDEX 331

12 GSA SIN INDEX ACCESSORIES SEATING STORAGE PREPARE WORKSURFACES SURPASS SMARTSPACE PREFIX EMERGE REFERENCE See pages for the specification guide. All Dimensions are Actual. Universal Overhead Task Lighting Fluorescent light bulb, 9 foot cord, 4 cord clips, mounting bars. Description Model H D W Wt. Cubes List Universal Overhead Task Light 24W M-USLO " 3.7" " Universal Overhead Task Light 30W M-USLO " 3.7" " Universal Overhead Task Light 42W M-USLO " 3.7" " Universal Overhead Task Light 60W M-USLO " 3.7" 46.5" Universal Overhead Task Light 24W - Fuse Plug M-USLO24FP 1.125" 3.7" " Universal Overhead Task Light 30W - Fuse Plug M-USLO30FP 1.125" 3.7" " Universal Overhead Task Light 42W - Fuse Plug M-USLO42FP 1.125" 3.7" " Universal Overhead Task Light 60W - Fuse Plug M-USLO60FP 1.125" 3.7" 46.5" M - EXCLUDED EXCLUDED 332

13 GSA SIN See pages for the specification guide. LED Undercabinet Task Lights LED light, magnets or adhesive pads for mounting M-USLEDxxAS and M-USLEDxxA models ship with power supply M-USLEDxxAUO models ship with 9" daisy chain jumper M-USLEDxxAS is single only (not daisy chainable) 17" LED Light w/power Supply (single) M-USLED17AS " LED Light w/power Supply (single) M-USLED31AS " LED Light w/power Supply for Daisy Chain (starter) M-USLED17A " LED Light w/power Supply for Daisy Chain (starter) M-USLED31A " LED Light w/8" and 30" Jumper Cord for Daisy Chain (follower) M-USLED17AUO " LED Light w/8" and 30" Jumper Cord for Daisy Chain (follower) M-USLED31AUO Undercabinet Occupancy Sensor w/1" End to End Connector M-USLEDOSA M - REFERENCE EMERGE PREFIX SMARTSPACE SURPASS WORKSURFACES PREPARE STORAGE SEATING ACCESSORIES INDEX 333

14 GSA SIN See pages for the specification guide. INDEX ACCESSORIES SEATING STORAGE PREPARE WORKSURFACES SURPASS SMARTSPACE PREFIX EMERGE REFERENCE Small Desktop Lamp LED light. 7' power cord. Lamp comes in a Silver Finish. *Small Desktop Lamp M-ACC-DTLAMPSM *Discontinuing end of year. Articulating LED Desk Lamp LED light. Light comes with a 9' 4" power cord. Lamp comes in a Silver Finish. LED Desktop Lamp Articulating LED Desk Lamp M-ACC-LED Articulating LED Desk Lamp w/occ Sensor M-ACC-LED1OC LED light. Light comes with a 9' 4" power cord. Lamp comes in a Silver Finish. M - EXCLUDED LED Task Desk Lamp M-ACC-LED

15 GSA SIN See pages for the specification guide. All Dimensions are Nominal. Shelf Organizer Core Premium Description Model Wt. Cubes Paint Paint Shelf Organizer M-PSO Corner Sleeve for Worksurfaces Corner sleeve, hardware and instruction. M -. Core Premium Description Model D W Wt. Cubes Paint Paint Corner Sleeve M-CRNSLV 17.5" 22.5" Select Paint Color See page 5 List List List List REFERENCE EMERGE PREFIX SMARTSPACE SURPASS WORKSURFACES PREPARE STORAGE SEATING ACCESSORIES INDEX 335

16 GSA SIN See pages for the specification guide. INDEX ACCESSORIES SEATING STORAGE PREPARE WORKSURFACES SURPASS SMARTSPACE PREFIX EMERGE REFERENCE Electrical O-Leg Wire Clip M-WMCLIPSM (4-Pack) M-WMCLIPLG (8-Pack) Available in black only 2 Receptacles 1 USB Under Worksurface Mt (Shown) M-PWRMOD2UWM Receptacles Under Worksurface Mt M-PWRMOD3UWM Available in Storm (STRM) or Snow (SNW) paint only 2 Receptacles 2 Data Accessory M-COMDOME Available in Loft paint only 2 Receptacles 1 USB M-PWRMOD2WC Receptacles (Shown) M-PWRMOD3WC Available in Storm (STRM) or Snow (SNW) paint only Select Paint Color See page 5 M

17 GSA SIN See pages for the specification guide. Panel Coat Hook (6 pack) M-PMC Universal Under Worksurface Hook Large Fabric Swatches Select Coat and Universal Hook Model Number M -. Select Fabric Swatch Model Number M -. Universal Hook M-GSAUHK Description Model H W List Fabric Swatch M-SYSFS Select Paint Color See page 5 Select Fabric See pages 6-9 REFERENCE EMERGE PREFIX SMARTSPACE SURPASS WORKSURFACES PREPARE STORAGE SEATING ACCESSORIES INDEX 337

18 GSA SIN See pages for the specification guide. INDEX ACCESSORIES SEATING STORAGE PREPARE WORKSURFACES SURPASS SMARTSPACE PREFIX EMERGE REFERENCE Touch-Up Paint M -. Core Premium Description Model Paint Paint Touch-Up Paint 0.6 oz Bottle M-ACC-TUB Touch-Up Paint 12 oz Spray M-ACC-TUS Core Paint Code Premium Paint Code Black...MPBL Flint...MP02 Loft... MP7B Greige...MPT5 Brownstone... MP7D Muslin...MPT3 Select Paint Color See page 5 Gunmetal... MPR3 Champagne... MPR5 Platinum...MPPL White... MPWT Silver... MPR6 List List 338

19 GSA SIN Laterals, Pedestals and Storage Standard Options Random Keying The factory will assign key(s) arbitrarily (see below chart for key numbers). Key Alike Process Order standard product which will be shipped with factory installed locks and random numbered cores. Order the appropriate quantity of like numbered cores required for each workstation or keyed area. Simply replace the factory installed core with the replacement cores after product has been installed. Random Keying Replacing Lock Cores Lock must be in the unlocked position. Insert core removal key and pull core straight out. (Reach units require rotating key 90 clockwise past unlocked position.) Insert new core with core removable key, hold core into lock and withdraw core removal key. Retain original core for future use. Key Numbers Lock Core Kit Include Laterals X 101E-225E M-LC M-MK22 Include New Low Credenzas, Towers, Pedestals X 101E-225E M-LC1S M-MK22 Universal Laterals X 101E-225E M-LC M-MK22 Universal Pedestals X 101E-225E M-LC M-MK22 Storage Cabinets X 101E-225E M-LC M-MK22 Hutches X 101E-225E M-LC M-MK22 Overheads (including RTA) X 101E-225E M-LC M-MK22 Locking Each Lock Core Kit includes one core and core removal tool, two keys and instructions. M -. Master Key Lock Core Kit M-LC M-LC1S Master Key (1) M-MK Lock Number REFERENCE EMERGE PREFIX SMARTSPACE SURPASS WORKSURFACES PREPARE STORAGE SEATING ACCESSORIES INDEX 339

20 GSA SIN INDEX ACCESSORIES SEATING STORAGE PREPARE WORKSURFACES SURPASS SMARTSPACE PREFIX EMERGE REFERENCE 340