RST Standards Committee Chairman s presentation. Presented by Hugh O Neill 17 November 2016
|
|
- Zoe Elliott
- 6 years ago
- Views:
Transcription
1 RST Standards Committee Chairman s presentation Presented by Hugh O Neill 17 November 2016
2 1. Key issues from the last six months 1. Sanders Standard GMRT2461 issue 2 was published Jun 2016: 3 months early at the request of RST SC. 2. Guidance Note GMGN2615 issue 2 on the LOC&PAS TSI 2014 approved for publication on 29 th September RIS on Door Control and Automatic Selective Door Operation RIS RST approved for publication in RMDB 28 th October RST SC did not support the creation of a MFSC to review/revise the technical content of GERT8270 on compatibility of trains & infrastructure. 5. Analysis of NTRs and NSRs for which RST SC is the lead committee is almost complete see next slide. 6. Two new starters in RST team. 2
3 2(a). Programmed Work Items for Next 6 Months Work Item Subject Pre- Consultation RST SC visit RIS-2750-RST issue 1 GMRT2466 issue 4 and RIS-2766-RST RIS-2702-RST issue 3 Rail Industry Standard on Supplier Assurance Feb 2017 Comments Supersedes GMRT2750 Railway Wheelsets Feb 2017 Thin RGS contains only notified clauses In-Service Examination and Reference Limits for Freight Wagons GMRT2453 issue 3 Registration and Identification of Railway Vehicles GMRT2003 issue 2 3 Steam Locos and Heritage Rail Vehicles Feb 2017 Mar 2017 Apr 2017 Ex-FTC document to be imported into RMDB Recommendation on future status to be approved by RST SC Recommendation on future status to be approved by RST SC
4 2(b). Programmed Work Items for Next 6 Months Work Item Subject Progress Comments GMRT2141 issue 4 GERT8014 issue 3 RIS-0796-CCS issue 1 RIS-2770-RST Issue 1 4 Resistance of Railway Vehicles to Derailment and Roll-over Axlebox Condition Monitoring - Hot Axlebox Detection Rail Industry Standard for RFID from Train to Infrastructure Movement of wagons originating from outside Great Britain on the GB mainline railway In drafting In drafting In drafting Drafting to commence after GMRT2453 Likely pre-con visit to RST SC Sep 2017 Needs to include the GB specific case for bearing condition monitoring Ex FTC document to be imported into RMDB 12-month and 5-year reviews underway on a number of standards and GNs
5 3. Standards Strategy and TSI Implementation 1. Implementation of Standards Strategy is well advanced: All 32 NTRs have been analysed and the recommendation regarding the future status of each has been approved by RST SC Of 9 NSRs, 6 have been analysed and the recommendation approved by RST SC 2. A drafting group has been set up to consider the content of GERT8270 on compatibility it will also look at GERT8273 on Gauging Compatibility. 3. For complex standards, we would like to make the RIS a complete standard and use the RGS to mandate the NTRs required - a thin RGS, thick RIS approach see next slide. 4. Work on ENs and TSIs continuously monitored via regular reports and RAE/1 mirror groups. 5. RST SC supports GB NSA in the LOC & PAS Working Group, drafting amendments to close out some specific cases & open points. 5
6 References 4. Mandatory and Voluntary standards TSI LOC & PAS TSI WAG National Technical Rule required for: Open Point Specific case Permitted alternative Compatibility GM/RT RGSs potentially made up of isolated measures to close gaps in TSI regime or to accommodate GB infrastructure Mandatory Voluntary EN References References RIS-27..-RST Complete sets of measures for the given scope of the standards TSIs may directly mandate specific parts of an EN or may make the use of an EN a presumption of conformity BS ISO RIS RST 6
7 5. Deviations 1. In last 6 months, 15 deviation applications received for RST as lead SC (March to October 2016 inclusive): 8 approved 0 not approved / rejected 1 withdrawn by applicant 1 deferred 5 in progress (to be seen at future RST SC meetings). 2. Issues Quality of applications still varies hugely as does the timing in project lifecycle Clarification concerning the different expectations from other SCs re the level of consultation required 7
8 Thank you Any questions?
Impact assessment for change to a Railway Group Standard, new Rail Industry Standard and withdrawal of associated RACOPs and Guidance Note
Impact assessment for change to a Railway Group Standard, new Rail Industry Standard and withdrawal of associated RACOPs and Guidance Note Version: Publication Date: 05 September 2017 Relevant Railway
More informationTechnical checklist for Technical Specifications for Interoperability. Issue One
Technical checklist for Technical Specifications for Interoperability Issue One Approved by the Industry Standards Coordination Committee 23 July 2010 ISCC/009 Email: enquirydesk@rssb.co.uk www.rssb.co.uk
More informationGuide for the application of the CR NOI TSI
European Railway Agency According to Framework Mandate C(2007)3371 final of 13/07/2007 Reference in ERA: ERA/GUI/07-2011/INT Version in ERA: 1.01 Date: 03 December 2013 Document prepared by Document type:
More informationIATF Transition Strategy Presenter: Mrs. Michelle Maxwell, IAOB
IATF 16949 Transition Strategy Presenter: Mrs. Michelle Maxwell, IAOB IATF 16949 Transition Strategy IATF 16949 transition strategy was presented at the IATF global stakeholder conference in Rome, Italy
More informationIATF Transition Strategy Presenter: Cherie Reiche, IAOB
IATF 16949 Transition Strategy Presenter: Cherie Reiche, IAOB IATF 16949 Transition Strategy IATF 16949 transition strategy was presented at the IATF global stakeholder conference in Rome, Italy in April
More informationNetwork Certification Body
Network Certification Body Scheme rules for assessment of Entities in Charge of Maintenance in accordance with requirements of ECM Regulation EU 445/2011 ECM certification scheme 1 NCB_MS_106_ECM Introduction
More informationSector Vision for the Future of Reference Standards
The Group of Representative Bodies (GRB) The Sector Forum Rail (SFR) Sector Vision for the Future of s Brussels, 13 th July 2018 Sector Vision for Future of s 13 th July 2018 Page 1 of 6 Scope of position
More informationGI/GN7633. Guidance on Lineside Signs. Rail Industry Guidance Note for GI/RT7033. Issue One: June 2015
GN This document contains one or more pages which contain colour. Published by: Copyright 2015 Rail Safety and Standards Board Limited GI/GN7633 Issue One: June 2015 Rail Industry Guidance Note for GI/RT7033
More informationRemit Issue April 2016
1 Introduction Remit Issue 02 18 April 2016 1.1 This document defines the scope, purpose and working arrangements for the High Integrity Systems Group. High integrity systems are playing an increasingly
More informationSpecification for TRAN Layer Services
Specification for TRAN Layer Services Version 1.0 November 3, 1995 Sponsored by: Architecture Working Group of the 1394 Trade Association Approved for Release by: 1394 Trade Association Steering Committee
More informationCircular on the notification and approval of IT systems
This is an English translation of Circular on the notification and approval of IT systems (Cirkulære om anmeldelse og godkendelse af it-systemer). In the event of a conflict between the Danish version
More informationStandardization mandate addressed to CEN, CENELEC and ETSI in the field of Information Society Standardization
Mandate/ 290 EN Standardization mandate addressed to CEN, CENELEC and ETSI in the field of Information Society Standardization 1 Title Mandate addressed to CEN, CENELEC and ETSI in support of the European
More informationQUESTION / CLARIFICATION
QUESTION / CLARIFICATION CO-ORDINATION BETWEEN NOTIFIED BODIES DIRECTIVE 2008/57/EC AND SUBSEQUENT AMENDMENTS ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE UNION QC-INF-015 Issue 01 Date: 25/02/2015
More informationFedRAMP: Understanding Agency and Cloud Provider Responsibilities
May 2013 Walter E. Washington Convention Center Washington, DC FedRAMP: Understanding Agency and Cloud Provider Responsibilities Matthew Goodrich, JD FedRAMP Program Manager US General Services Administration
More informationV/TC SIC Vehicle / Train Control Communications System Interface Committee
V/TC&C SIC PROGRAMME OF WORK Issue number: 2 2/4/2011 Traffic Management to improve energy efficiency, reduce cost, reduce carbon, and improve train performance. Advisory Information for Energy Management
More informationIEEE Maintenance Task Force 12 th July 2017 Berlin, Germany
IEEE IEEE P802.3 Maintenance report Task Force July - 2008 July Plenary 2017 Page 1 IEEE 802.3 Maintenance Task Force 12 th July 2017 Berlin, Germany Adam Healey Chair, IEEE 802.3 Maintenance TF Vice Chair,
More informationIAF Informative Document. Information on the Transition of Management System Accreditation to ISO/IEC :2015 from ISO/IEC 17021:2011
IAF Informative Document Information on the Transition of Management System Accreditation to ISO/IEC 17021-1:2015 from ISO/IEC 17021:2011 Issue 1 (IAF ID 11:2015) Issue 1 Information on the Transition
More informationRECOMMENDATION FOR USE
Page 1 of 23 TITLE CONTENT OF EC CERTIFICATE/ QMS-APPROVAL/ ISV ORIGINATOR NB-RAIL SUB-GROUP STRATEGY SUBJECT RELATED TO DIRECTIVE 2008/57/EC (AS AMENDED BY 2009/131/EC, 2011/18/EU, 2010/713/EU, 2013/9/EU,
More informationReviewed by ADM(RS) in accordance with the Access to Information Act. Information UNCLASSIFIED.
Assistant Deputy Minister (Review Services) Reviewed by in accordance with the Access to Information Act. Information UNCLASSIFIED. Security Audits: Management Action Plan Follow-up December 2015 1850-3-003
More informationVoluntary certification at an intermediate stage of manufacture
Chapter: 2.15 Other Text: Key words: MDD results of any assessment and verification operation, which where appropriate have been carried out in accordance with this Directive at an intermediate stage of
More informationRECOMMENDATION FOR USE
Page 1 of 6 TITLE CONTENT OF THE TECHNICAL FILE ORIGINATOR NB-RAIL STRATEGY SG SUBJECT RELATED TO Directives 2008/57/EC, 2009/131/EC, 2011/18/EU, Recommendation 2011/217/EU, Decision 2010/713/EU and all
More informationREVISION 5. International Automotive Task Force TRANSITION STRATEGY ISO/TS IATF Dated 1 March
REVISION 5 Dated 1 March 2018 International Automotive Task Force TRANSITION STRATEGY ISO/TS 16949 IATF 16949 2 CONTENTS Foreword Revision 1 dated 3 October 2016 Revision 2 dated 21 November 2016 Revision
More informationFinal Report of TF-CS/OTA
Submitted by the Secretary of the UN Task Force on Cyber Security and Over-the-Air issues Informal document GRVA-01-19 1st GRVA, 25-28 September 2018 Agenda item 6 (b) Final Report of TF-CS/OTA United
More informationContent of mandatory certificates
Chapter: 2.5.1 Conformity assessment procedures; General rules Text:... Key words: certificate, certificate of competence, 1. Purpose The purpose of this recommendation is to provide guidance on the minimum
More informationAustralian Standard. Records Management. Part 2: Guidelines AS ISO ISO TR
AS ISO 15489.2 2002 ISO TR 15489-2 AS ISO 15489.2 Australian Standard Records Management Part 2: Guidelines [ISO title: Information and documentation Records management Part 2: Guidelines] This Australian
More informationTRINIDAD AND TOBAGO BUREAU OF STANDARDS
TRINIDAD AND TOBAGO BUREAU OF STANDARDS STANDARDS WORK PROGRAMME OCTOBER 2016 MARCH 2017 (STATUS AS OF OCTOBER 2016) Date: 2017-02-24 TRINIDAD AND TOBAGO BUREAU OF STANDARDS Location: 1-2 Century Drive
More informationOIML-CS PD-05 Edition 2
PROCEDURAL DOCUMENT OIML-CS PD-05 Edition 2 Processing an application for an OIML Type Evaluation Report and OIML Certificate OIML-CS PD-05 Edition 2 ORGANISATION INTERNATIONALE DE MÉTROLOGIE LÉGALE INTERNATIONAL
More informationAS/NZS ISO/IEC 25030:2013
ISO/IEC 25030:2007, IDT Australian/New Zealand Standard Software engineering Software product Quality Requirements and Evaluation (SQuaRE) Quality requirements AS/NZS ISO/IEC 25030:2013 This Joint Australian/New
More informationCALIFORNIA INDEPENDENT SYSTEM OPERATOR CORPORATION FERC ELECTRIC TARIFF FIRST REPLACEMENT VOLUME NO. II Original Sheet No. 727 METERING PROTOCOL
FIRST REPLACEMENT VOLUME NO. II Original Sheet No. 727 METERING PROTOCOL FIRST REPLACEMENT VOLUME NO. II Original Sheet No. 728 METERING PROTOCOL Table of Contents MP 1 OBJECTIVES, DEFINITIONS AND SCOPE
More informationERWA UNIFE Railway Wheels Committee
ERWA UNIFE Railway Wheels Committee Jean-Pierre Auger Chairman of ERWA UNIFE General Assembly 19 June 2008 ERWA, the association of European producers of railway wheels and wheelsets was established in
More informationSmart Metering Forum: The DCC Roadmap. Chris Rowell 30 November 2011
Smart Metering Forum: The DCC Roadmap Chris Rowell 30 November 0 The Data & Communications Company What we know about the DCC What we would like to know about the DCC What the DCC will need to do DCC The
More informationISO TC46/SC11 Archives/records management
ISO TC46/SC11 Archives/records management GUIDANCE FOR IMPLEMENTING DOCUMENTED INFORMATION CLAUSE USING PROCESSES AND CONTROLS OF ISO 30301:2011 Management system for records EXPLANATORY PAPER NOVEMBER
More informationManufacturer certification in plant, metal and rolling-stock engineering
Manufacturer certification in plant, metal and rolling-stock engineering To ensure you meet the highest quality standards. TÜV SÜD Industrie Service GmbH Be prepared for going global In the course of globalisation,
More informationGD 2018/0020 COUNCIL OF MINISTERS RESPONSE TO THE POLICY PRIORITIES & ACTIONS CHIEF MINISTERS WORKING GROUP ON TELECOMMUNICATIONS
GD 2018/0020 COUNCIL OF MINISTERS RESPONSE TO THE POLICY PRIORITIES & ACTIONS CHIEF MINISTERS WORKING GROUP ON TELECOMMUNICATIONS Background The Chief Minister has a vision that the Isle of Man has a world
More informationJuly 30, Q2 Quarterly Report on Progress in Processing Interconnection Requests; Docket No. ER
California Independent System Operator Corporation The Honorable Kimberly D. Bose Secretary Federal Energy Regulatory Commission 888 First Street, N.E. Washington, D.C. 20426 July 30, 2010 Re: Q2 Quarterly
More informationNetwork Certification Body
Network Certification Body Scheme rules for assessment of railway projects to requirements of the Railways Interoperability Regulations as a Notified and Designated Body 1 NCB_MS_56_Notified and Introduction
More informationISO Certification For Laboratory Accreditation. Dr Amadou TALL Consultation
ISO 17025 Certification For Laboratory Accreditation Dr Amadou TALL Consultation ISO 17025 Certification ISO/IEC 17025 Global quality standard for testing and calibration laboratories. It is the basis
More informationAdditional Requirements for Accreditation of Certification Bodies
Additional Requirements for Accreditation of Certification Bodies ADDITIONAL REQUIREMENTS FOR ACCREDITATION OF CERTIFICATION BODIES Copyright Standards Council of Canada, 2008 All rights reserved. No
More informationERC GmbH. Notified Body Interoperability (Subsystem vehicle) ECM Certification Body Independent Safety Assessment
ERC GmbH Notified Body Interoperability (Subsystem vehicle) ECM Certification Body Independent Safety Assessment 5 years ECM certification Experience of a certificatin body and the sector VPI Workshops
More informationTraining of BRs/NCs reviewers and experts for Biennial Update Reports technical analysis. 5 th BRs and NCs lead reviewers meeting
Training of BRs/NCs reviewers and experts for Biennial Update Reports technical analysis 5 th BRs and NCs lead reviewers meeting Kyoko Miwa, Haike Stephen Mitigation Data Analysis programme, UNFCCC secretariat
More informationCommon Operating Environment (COE) Platform Certification Program. Certification Policy
Common Operating Environment (COE) Platform Certification Program Certification Policy February 2004 Version 2.0 Copyright February 2004, The Open Group All rights reserved. No part of this publication
More informationEuropean Standardization
European Standardization Contents European standardization system Relations between IEC and CENELEC CENELEC and directives and mandates from the European Union IEC (TC 100) co-operation with CENELEC in
More informationPhysical Security Reliability Standard Implementation
Physical Security Reliability Standard Implementation Attachment 4b Action Information Background On March 7, 2014, the Commission issued an order directing NERC to submit for approval, within 90 days,
More informationAdministrative Guideline. SMPTE Metadata Registers Maintenance and Publication SMPTE AG 18:2017. Table of Contents
SMPTE AG 18:2017 Administrative Guideline SMPTE Metadata Registers Maintenance and Publication Page 1 of 20 pages Table of Contents 1 Scope 3 2 Conformance Notation 3 3 Normative References 3 4 Definitions
More informationPROCEDURE FOR THE DEVELOPMENT OF EURACHEM GUIDANCE. Contents
Approved 2018-05-17 PROCEDURE FOR THE DEVELOPMENT OF EURACHEM GUIDANCE Contents PROCEDURE FOR THE DEVELOPMENT OF EURACHEM GUIDANCE... 2 Purpose... 2 Scope... 2 Responsible organisation... 2 Eurachem Guidance
More informationBEST PRACTICE GUIDE ON THE USE OF THE ELECTRONIC COMMON TECHNICAL DOCUMENT
CMD(h) BEST PRACTICE GUIDE ON THE USE OF THE ELECTRONIC COMMON TECHNICAL DOCUMENT (ectd) IN THE MUTUAL RECOGNITION AND DECENTRALISED PROCEDURES April 2008 in the MRP/DCP April 2008 Page 1/29 TABLE OF CONTENTS
More informationCertificate of Acceptance
Specific Conditions The following Conditions are specific to the approved product/s contained within this Certificate. These conditions must be adhered to in addition to the Network Rail General Conditions
More informationGlobal Specification Protocol for Organisations Certifying to an ISO Standard related to Market, Opinion and Social Research.
CONTENTS i. INTRODUCTION 3 ii. OVERVIEW SPECIFICATION PROTOCOL DOCUMENT DEVELOPMENT PROCESS 4 1. SCOPE 5 2. DEFINITIONS 5 3. REFERENCES 6 4. MANAGEMENT STANDARDS FOR APPROVED CERTIFICATION BODIES 6 4.1
More informationCompliance Enforcement Initiative
Compliance Enforcement Initiative Filing and Status Update November 2, 2011 Rebecca Michael Status of the Filings NERC filed several components of the Compliance Enforcement Initiative on September 30,
More informationBERMUDA REGULATORY AUTHORITY (NUMBERING PORTABILITY) GENERAL DETERMINATION 2014 BR 8 / 2014
QUO FA T A F U E R N T BERMUDA REGULATORY AUTHORITY (NUMBERING PORTABILITY) GENERAL BR 8 / 2014 The Regulatory Authority, in exercise of the power conferred by section 62 of the Regulatory Authority Act
More informationNDT Certification for Railway Maintenance Personnel in France; 10 Years of the CFCM
5th International Conference on Certification and Standardization in NDT - Lecture 29 NDT Certification for Railway Maintenance Personnel in France; 10 Years of the CFCM Jacques BOUVY, Comité Ferroviaire
More informationPolicy. Business Resilience MB2010.P.119
MB.P.119 Business Resilience Policy This policy been prepared by the Bi-Cameral Business Risk and Resilience Group and endorsed by the Management Boards of both Houses. It is effective from December to
More informationAudit Report. Chartered Management Institute (CMI)
Audit Report Chartered Management Institute (CMI) 10 October 2012 Note Restricted or commercially sensitive information gathered during SQA Accreditation monitoring activities is treated in the strictest
More informationTAF/TAP workshop Brussels, September 2017
TAF/TAP workshop Brussels, September 2017 1 TAF TSI Business Process & Train Information System 10 July 2018 2 TAF TSI Functions Grouped Joint IM-RU Functions Reference Files Common Interface Short Term
More informationInformation and documentation Records management. Part 1: Concepts and principles AS ISO :2017 ISO :2016
ISO 15489-1:2016 AS ISO 15489.1:2017 Information and documentation Records management Part 1: Concepts and principles This Australian Standard was prepared by Committee IT-021, Records and Document Management
More informationAWS-SCWI. American Welding Society Senior Certified Welding Inspector. Certification Programs for the Year 2018
BETZ ENGINEERING & TECHNOLOGY ZONE Educational & Research Division AWS-SCWI American Welding Society Senior Certified Welding Inspector Certification Programs for the Year 2018 Authorized International
More informationBSI Group supporting digital transformation in the Built Environment
BSI Group supporting digital transformation in the Built Environment Rob Hine 1 08/02/2018 BSI Group structure Policy, Engagement National Standards Body Assessment and Certification Compliance support
More informationCONTROL SYSTEMS DESIGN SPECIFICATION
CONTROL SYSTEMS DESIGN SPECIFICATION Version : 1.00 This document aims to identify clearly and precisely what CooperVision seeks to achieve with this project/system. It defines the function of the system
More informationAustralian/New Zealand Standard
AS/NZS ISO/IEC 15910:2004 ISO/IEC 15910:1999 AS/NZS ISO/IEC 15910 Australian/New Zealand Standard Information technology Software user documentation process AS/NZS ISO/IEC 15910:2004 This Joint Australian/New
More informationSmart Meters Programme Schedule 6.3. (Development Process) (CSP North version)
Smart Meters Programme Schedule 6.3 (Development Process) (CSP North version) Schedule 6.3 (Development Process) (CSP North version) Amendment History Version Date Status v.1 Signature Date Execution copy
More informationEmbracing Competition Stakeholder Engagement Workshop no May 2018
Embracing Competition Stakeholder Engagement Workshop no. 26 22 May 2018 Welcome and opening remarks Mark Adolphus, Director of Connections 2 Agenda 09:45 10:00 Coffee and registration 10:00 10:05 Welcome
More informationSME License Order Working Group Update - Webinar #3 Call in number:
SME License Order Working Group Update - Webinar #3 Call in number: Canada Local: +1-416-915-8942 Canada Toll Free: +1-855-244-8680 Event Number: 662 298 966 Attendee ID: check your WebEx session under
More informationDraft ETSI EG V3.1.1 ( )
Draft EG 200 351 V3.1.1 (1999-07) Guide object identifier tree; Rules and registration procedures 2 Draft EG 200 351 V3.1.1 (1999-07) Reference REG/SPS-05209 (39001icq.PDF) Keywords object identifier,
More informationRINF XML Data Validation Guide
RINF XML Data Validation Guide RINF Document Information Date: Fri, 2014 Dec 19 Release Number: 1.1 Version: 0.5 Author(s): Reference: European Dynamics [Ref Identifier] European Railway Agency, 120, rue
More informationGUIDELINE. of the European Committee for Welding of Railway Vehicles (ECWRV) ( ) PART 1
GUIDELINE of the European Committee for Welding of Railway Vehicles (ECWRV) (2016-05-10) PART 1 Procedure for the application of EN 15085 and certification of welding manufacturers for welding railway
More informationInternational Standard ISO/IEC 17799:2000 Code of Practice for Information Security Management. Frequently Asked Questions
November 2002 International Standard ISO/IEC 17799:2000 Code of Practice for Information Security Management Introduction Frequently Asked Questions The National Institute of Standards and Technology s
More informationUKAS Publications List
PUBLICATIONS FOR ALL ORGANISATIONS General BEIS Accreditation Logo & Symbols The National Accreditation Logo & Symbols: Conditions for use by UKAS and UKAS accredited organisations June 2018 - replaces
More informationPRODUCT CERTIFICATION SCHEME FOR CHILDREN TOYS
Ref No: RACS/PCS/22 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Children Toys
More informationAustralian Standard. Information and documentation Records management processes Metadata for records. Part 1: Principles
AS ISO 23081.1 2006 ISO 23081-1:2006 AS ISO 23081.1 2006 Australian Standard Information and documentation Records management processes Metadata for records Part 1: Principles This Australian Standard
More informationInter American Accreditation Cooperation. IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations
IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations CLASSIFICATION This document is classified as an IAAC Mandatory Document. AUTHORIZATION Issue Nº: 07 Prepared by: MLA Committee and
More informationISO/IEC overview
ISO/IEC 20000 overview Overview 1. What is ISO/IEC 20000? 2. ISO/IEC 20000 and ITIL 2 BS 15000 BS15000 started in UK and first launched on July 1, 2003. Which was replaced by ISO/IEC 20000 after formal
More informationClassification of fire resistance according to EN : A1:2009 of a METACON RGS EW 360 ECO Twindoor rolling shutter
P.O. Box 554 2665 ZN Bleiswijk Brandpuntlaan Zuid 16 2665 NZ Bleiswijk The Netherlands +31 88 3473 723 nederland@efectis.com Classification of fire resistance according to EN 13501-2: 2007 +A1:2009 of
More informationAMENDMENT TO THE COMPULSORY SPECIFICATION FOR SWITCHES FOR FIXED INSTALLATIONS (VC 8003)
610 National Regulator for Compulsory Specifications Act (5/2008): Amendment to the Compulsory Specification for switches for fixed installations (VC 8003) 39220 DEPARTMENT OF TRADE AND INDUSTRY STAATSKOERANT,
More informationGovernment e-market Place GeM 3.0
Government e-market Place GeM 3.0 Buyer registration GeM 3.0 Page 1 of 9 Change History Sr. No. Document version Release date Drafted by 1. Version 1.2 30 Nov 2017 GeM This is version 1.0 Metadata of the
More informationSection I. GENERAL PROVISIONS
LAW OF THE RUSSIAN FEDERATION NO. 5151-1 OF JUNE 10, 1993 ON CERTIFICATION OF PRODUCTS AND SERVICES (with the Additions and Amendments of December 27, 1995, March 2, July 31, 1998) Federal Law No. 154-FZ
More informationAustralian Standard. General requirements for the competence of testing and calibration laboratories AS ISO/IEC ISO/IEC 17025:1999
AS ISO/IEC 17025 1999 ISO/IEC 17025:1999 AS ISO/IEC 17025 Australian Standard General requirements for the competence of testing and calibration laboratories This is a free 7 page sample. Access the full
More informationISO/IEC INTERNATIONAL STANDARD. Information technology Security techniques Information security management system implementation guidance
INTERNATIONAL STANDARD ISO/IEC 27003 First edition 2010-02-01 Information technology Security techniques Information security management system implementation guidance Technologies de l'information Techniques
More informationISO/IEC JTC 1 N 13538
ISO/IEC JTC 1 N 13538 ISO/IEC JTC 1 Information technology Secretariat: ANSI (United States) Document type: Business Plan Title: SC 41 Business Plan and Dashboard 2017 Status: This document is circulated
More informationIATF - International Automotive Task Force Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations
Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
More informationISO/IEC JTC 1 Special Working Group on Accessibility (SWG-A)
ISO/IEC JTC 1 Special Working Group on Accessibility (SWG-A) JTC 1 SWG-A N 274 2007-06-06 Replaces: SWG-A N 262 Title: Source: SWG-A Project Plan Ken Salaets, Project Plan Editor Due Date: Requested Action:
More informationCLASSIFICATION OF FIRE RESISTANCE PERFORMANCE ACCORDING TO EN :2007+A1:2009 OF A ROLLING SHUTTER TYPE METACON RGS EI (1) 120 MOUNTED ON A WALL
CLASSIFICATION OF FIRE RESISTANCE PERFORMANCE ACCORDING TO EN 13501-2:2007+A1:2009 OF A ROLLING SHUTTER TYPE METACON RGS EI (1) 120 MOUNTED ON A WALL Sponsor: Metacon BV James Wattstraat 14 2809 PA GOUDA
More informationDraft Thick RDDS (Whois) Consensus Policy and Implementation Notes
Draft Thick RDDS (Whois) Consensus Policy and Implementation Notes Version 2.1 25 November 2015 Table of Contents Thick RDDS (Whois) Consensus Policy... 3 1. Consensus Policy... 3 2. Phased Implementation...
More informationStandard Operating Procedure. Preparation, Review and Approval of Clinical Research Standard Operating Procedures and Work Instructions
Standard Operating Procedure SOP number: SOP full title: SOP-JRO-35-001 Preparation, Review and Approval of Clinical Research Standard Operating Procedures and Work Instructions SOP effective: 11 July
More informationWorking Group Charter: Web Services Basic Profile
Working Group Charter: Web Services Basic Profile Web Services Basic Profile (wsbasic) Creation Date: 2002.03.05 Revision Date: 2008.09.09 Document Editors: WS-I Secretary (secretary@ws-i.org) This Working
More informationAustralian Standard. Industrial automation systems and integration Open systems application integration framework
AS ISO 15745.2 2004 ISO 15745-2:2003 AS ISO 15745.2 Australian Standard Industrial automation systems and integration Open systems application integration framework Part 2: Reference description for ISO
More informationProposed Clean and Redline for Version 2 Implementation Plan
Exhibit A Implementation Plans for CIP-002-2 through CIP-009-2 and CIP-002-3 and CIP-009-3 For Generator Owners and Generator Operators of U.S. Nuclear Power Plants Proposed Clean and Redline for Version
More informationWorking Group Charter: Basic Profile 1.2 and 2.0
Working Group Charter: Basic Profile 1.2 and 2.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 Web Services Basic
More informationAustralian Standard. Records Management. Part 1: General AS ISO ISO
AS ISO 15489.1 2002 ISO 15489-1 AS ISO 15489.1 Australian Standard Records Management Part 1: General [ISO title: Information and documentation Records management Part 1: General] This Australian Standard
More informationECC Recommendation (17)04. Numbering for ecall
ECC Recommendation (17)04 Numbering for ecall Approved 22 November 2017 ECC/REC/(17)04 Page 2 INTRODUCTION ecall is a service designed for automotive vehicles to provide quick emergency response in case
More informationP.O. Box NL-2665 ZN Bleiswijk Brandpuntlaan Zuid 16 - NL-2665 NZ Bleiswijk The Netherlands
P.O. Box 554 - NL-2665 ZN Bleiswijk Brandpuntlaan Zuid 16 - NL-2665 NZ Bleiswijk The Netherlands +31 88 3473 723 nederland@efectis.com Classification of the fire resistance according to EN 13501-2:2007+A1:2009
More informationISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements
INTERNATIONAL STANDARD ISO/IEC 17050-1 First edition 2004-10-01 Conformity assessment Supplier's declaration of conformity Part 1: General requirements Évaluation de la conformité Déclaration de conformité
More informationEUROPEAN STANDARD Electronic Signatures and Infrastructures (ESI); Time-stamping protocol and time-stamp token profiles
Final draft EN 319 422 V1.1.0 (2015-12) EUROPEAN STANDARD Electronic Signatures and Infrastructures (ESI); Time-stamping protocol and time-stamp token profiles 2 Final draft EN 319 422 V1.1.0 (2015-12)
More informationP344 IWG 2 & 4 MSID Pairs
Public P344 IWG 2 & 4 SID Pairs First Workgroup meeting 19 July 2018 Health & Safety 2 Agenda Agenda item Lead 1. Welcome Chair 2. Objectives Chair 3. Background Sasha Townsend 4. SVAA Register and Notifying
More informationCANADIAN PAYMENTS ASSOCIATION ASSOCIATION CANADIENNE DES PAIEMENTS STANDARD 005 STANDARDS FOR THE EXCHANGE OF FINANCIAL DATA ON AFT FILES
CANADIAN PAYMENTS ASSOCIATION ASSOCIATION CANADIENNE DES PAIEMENTS STANDARD 005 STANDARDS FOR THE EXCHANGE OF FINANCIAL DATA ON AFT FILES 2017 CANADIAN PAYMENTS ASSOCIATION 2017 ASSOCIATION CANADIENNE
More informatione-ready Building Next Generation IT infrastructures ϕ The Cabling Partnership Mike Gilmore Managing Director, e-ready Building The Cabling Partnership
eready Building THE ONESTOP SHOP Telecommunications equipment and telecommunications cabling Specification for installation, operation and maintenance THE ONESTOPSHOP FOR INSTALLATION Q.A. Mike Gilmore
More informationA S ISO Records Management Part 1: General
AS ISO 15489.1 2002 ISO 15489-1 AS ISO 15489.1 Australian Standard Records Management Part 1: General [ISO title: Information and documentation Records management Part 1: General] This Australian Standard
More informationCouncil, 8 February 2017 Information Technology Report Executive summary and recommendations
Council, 8 February 2017 Information Technology Report Executive summary and recommendations Introduction This report provides the Council with an update into the work of the Information Technology Directorate
More informationWork to establish standard ENTSOE STAKEHOLDER COMMITTEE 1
Work to establish standard EN50549-1 EN50549-2 EN50549-10 2017-03-14 ENTSOE STAKEHOLDER COMMITTEE 1 SOMMAIRE Summary Key points TC8X / WG31 01 Schedule1 TC8X / approach1 02 03 Next steps 04 Others considerations1
More informationPrivacy and Proxy Service Provider Accreditation. ICANN58 Working Meeting 11 March 2017
Privacy and Proxy Service Provider Accreditation ICANN58 Working Meeting 11 March 2017 Agenda 13:45-15:00 15:00-15:15 15:15-16:45 Timeline Check; Policy Document Update; Third- Party Requests Break PSWG
More informationDrafting Recommendations. Gary Fishman Pearlfisher International
ITU-T Rapporteur and Editor Tutorial (Geneva, 28 29 November 2011 ) Gary Fishman Pearlfisher International TSAG Chairman (1996-2008) Rapporteur/Editor Tutorial: Outline General Comments Work Flow from
More information