onlinecomponents.com
|
|
|
- Muriel Russell
- 6 years ago
- Views:
Transcription
1
2
3 Dimensions Unit: mm (inch) 3 -PPPA FOR 32-POINT PLC I/O MODULES (CONNECTOR TYPE) The G79-PC with a connector for the G7TC cannot be used for the XW2C due to a difference in wiring. The G79-PC can be used for some of the XW2B Screw Terminal Blocks, refer to the XW2B data sheet. length L Wiring Diagram FCN-367J024-AU/F (mated side) XG4M-2030 (mated side) -050A -100A -150A -200A -300A -500A Part number 0.5 m (1.64 ft) 1 m (3.28 ft) 1.5 m (4.92 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft) length L Combinations of Omron PLC I/O Modules and Screw Terminal Blocks Triangle mark PLC I/O module I/O points Terminal block Dedicated cable C200H-ID215 -PPPA C200H-OD215 C200H-MD215 C200H-MD115 C200H-MD501 C200H-ID501 C200H-OD501 C500-ID218CN C500-ID501CN C500-OD415CN C500-MD211CN C500-OD501CN 32 points output 32 points output 32 points output 32 points output XW2B-20G4 XW2B-40G5-T -D C200H-ID215 C200H-ID501 C500-ID218CN C500-ID501CN C200H-MD215 C200H-MD115 C200H-MD501 C500--MD211CN XW2C-20G5-IN16 (See Note 3) Note: 1. The G79-P with a connector for the G7TC cannot be used for the XW2C due to a difference in wiring. The G79-PC can be used for some of the XW2B Screw Terminal Blocks, refer to the XW2B data sheet. 2. The Input or Output Modules above have two connectors, so each one can use up to two Terminal Blocks and two dedicated cables. 3. The XW2C is a dedicated Input Terminal Block. If the XW2C is connected to a PLC module that handles both input and output signals (modules with MD in the part number), only the input portion of the PLC module can be used. 3
4 Unit: mm (inch) 3 -PPPB FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE) length L Wiring Diagram FCN-367J040-AU/F (mated side) XG4M-4030 (mated side) -050B -100B -150B -200B -300B -500B Part number 0.5 m (1.64 ft) 1 m (3.28 ft) 1.5 m (4.92 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft) length L Combinations of Omron PLC I/O Modules and Screw Terminal Blocks Triangle mark PLC I/O module I/O points Terminal block Dedicated cable CQM1-ID points XW2B-40G5 -PPPB CQM1-OD213 C200H-ID216 C200H-OD218 C200H-OD21B XW2B-40G4 C200H-ID111 C200H-ID217 C200H-OD219 C500-ID114 3G2A5-ID219 3G2A5-OD points Note: 32-point I/O modules use one Terminal Block and one dedicated cable. 64-point I/O modules use two Terminal Blocks and two dedicated cables. 4
5 3 -PPPD FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE) -P00D length for A and B B 250 (9.84) Yellow Part number length A length B -100D 1 m (3.28 ft) 0.75 m (2.46 ft) -150D 1.5 m (4.92 ft) 1.25 m (4.10 ft) -200D 2 m (6.56 ft) 1.75 m (5.74 ft) -300D 3 m (9.84 ft) 2.75 m (9.02 ft) -500D 5 m (16.40 ft) 4.75 m (15.58 ft) Note: 1. CN2 (black cable side) is wired to line A of CN1 and CN3 (yellow cable side) is wired to line B of CN1. 2. The G79-PC for the G7TC Terminal Block cannot be used for the XW2C due to a difference in wiring. Line A Line B Wiring Diagram A Black FCN-367J024-AU/F CN1 (mated side) 500 (19.68) XG4M-2030 CN3 (mated side) Triangle mark XG4M-2030 CN2 (mated side) Triangle mark Combinations of Omron PLC I/O Modules and Screw Terminal Blocks PLC I/O module I/O points Terminal block Dedicated cable CQM1-ID points Two XW2C-20GS-IN16 input blocks One -PPPD cable C200H-ID216 C200H-ID217 C500-ID114 3G2A5-ID points Four XW2C-20GS-IN16 input blocks Two -PPPD cables 5
6 Unit: mm (inch) 3 -PPPH-P FOR 96-POINT CS1 PLC I/O MODULES (CONNECTOR TYPE) -P00H-1 -P00H-2 -P00H-3 A A A Part number -100H-1-200H-1-300H-1-500H-1 length A 1 m (3.28 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft) Part number length A length B -100H-2 1 m (3.28 ft) 1 m (3.28 ft) -200H-2 2 m (6.56 ft) 2 m (6.56 ft) -300H-2 3 m (9.84 ft) 3 m (9.84 ft) -500H-2 5 m (16.40 ft) 5 m (16.40 ft) Combinations of Omron PLC I/O Modules and Screw Terminal Blocks B Part number length A B C -100H-3 1 m (3.28 ft) 0.75 ft (2.45 ft) 1 m (3.28 ft) -200H-3 2 m (6.56 ft) 1.75 ft (5.74 ft) 2 m (6.56 ft) -300H-3 3 m (9.84 ft) 2.75 ft (9.02 ft) 3 m (9.84 ft) -500H-3 5m (16.40 ft) 4.75 ft (15.58 ft) 5m (16.40 ft) PLC I/O module I/O points Terminal blocks Dedicated cable CS1W-ID291, 96 points Two XW2B-60GP terminal blocks Two -PPPH-1 cables CS1W-OD291, CS1W-OD292 CS1W-MD291, CS1W-MD292 CS1W-ID291, 96 points Two XW2B-40G4 + XW2B-20G4 or Two -PPPH-2 cables CS1W-OD291, CS1W-OD292 CS1W-MD291, CS1W-MD292 two XW2B-40G5 + terminal blocks CS1W-ID291, CS1W-OD291, CS1W-OD292 CS1W-MD291, CS1W-MD points Six XW2B-20G4 or six terminal blocks Two -PPPH-3 cables Note: For detailed information about connector pin-outs, refer to CS1 Operation Manual (W339), Appendix A. C B 6
7 3 -PPPF CABLE WITH CRIMP TERMINALS (20 POLES) XG4M-2030 length L Terminal Y (M3.5) To devices Wiring Diagram XG4M-2030 (mated side) Terminal Y (M3.5) 300 (11.81) Triangle mark Part number -100F -150F -200F -300F -500F length L 1 m (3.28 ft) 1.5 m (4.92 ft) 2 m (6.56 ft) 3 m (9.84 ft) 5 m (16.40 ft) Combinations of Omron PLC I/O Modules and Screw Terminal Blocks PLC I/O module Terminal block Dedicated cable Use any I/O module with a terminal block from Omron or another manufacturer, or an I/O board for a computer. XW2B-20G4 -PPPF 7
8 Installation 3 CONNECTIONS BETWEEN OMRON S I/O MODULES AND SCREW TERMINAL BLOCKS Item Input (ID) Output (OD) PLC I/O modules C200H-ID215 C200H-ID501 C500-ID501CN C500-ID218CN 32-point input modules use two blocks and two cables. C200H-OD215 C200H-OD501 C500-OD501CN 32-point output modules use two blocks and two cables. Terminal blocks Connection diagram Connection diagram XW2B--20G5 XW2B-20G4 -PPPA G79-PC XW2B--20G5 XW2B-20G4 -PPPA G79-PC 8
9 Item PLC I/O module Output (OD) C500-OD415CN 32-point output module uses two blocks and two cables. Terminal block Connection diagram -PPPA XW2B-20G4 G79-PC 9
10 Item PLC I/O modules Mixed I/O (MD) C200H-MD115 C200H-MD215 C200H-MD501 C500-MD211CN 16-point input/16-point output mixed I/O modules use two blocks and two cables. Terminal blocks XW2B-20G4 Connection diagram -PPPA G79-PC 10
11 Item PLC I/O module Terminal block Group 2 High -density Input/Output CQM1-ID point Use one terminal block and one cable. C200H-ID point Use one terminal block and one cable. C200H-ID point Use two terminal blocks and two cables. C200H-ID point Use two terminal blocks and two cables. C500-ID point Use two terminal blocks and two cables. 3G2A5-ID point Use two terminal blocks and two cables. CQM1-OD point Use one terminal block and one cable. C200H-OD point Use one terminal block and one cable. C200H-OD point Use two terminal blocks and two cables. XW2B-40G5 XW2B-40G4 Connection diagram -PPPB ( ) ( ) XW2B-40G5 ( ) 11
12 Item High-density I/O 1:1 Connection PLC I/O module CS1W-ID29P CS1W-OD29P CS1W-MD29P Use two terminal blocks and two cables. Terminal block One XW2B-60G5 or one XW2B-60G4 per cable Connection XW2B-60GP -PPPH-1 Item High-density I/O 1:2 Connection PLC I/O module Terminal block CS1W-ID29P CS1W-OD29P CS1W-MD29P Use two 40-point and two 20-point terminal blocks and two cables. XW2B-40G5 + blocks or XW2B-40G4 + XW2B-20G4 blocks per cable -PPPH-2 Connection XW2B-40GP XW2B-20GP Note: For detailed information about connector pin-outs, refer to CS1 Operation Manual (W339), Appendix A. 12
13 Item High-density I/O 1:3 Connection PLC I/O module CS1W-ID29P CS1W-OD29P CS1W-MD29P Use six 20-point terminal blocks of the same kind and two cables. Terminal block Three blocks or three XW2B-20G4 blocks per cable -PPPH-3 Connection XW2B-20GP XW2B-20GP XW2B-20GP Note: For detailed information about connector pin-outs, refer to CS1 Operation Manual (W339), Appendix A. NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by OMRON ELECTRONICS, INC. OneEastCommerceDrive Schaumburg, IL OMRON OMRON CANADA, INC. 885 Milner Avenue Scarborough, Ontario M1B 5V Cat. No. GC RIO-1 04/00 Specifications subject to change without notice. Printed in U.S.A.
14 This datasheet has been downloaded from: Datasheets for electronic components.
Link Master Adapter. Ordering Information. Connect High-Density I/O PLC Modules to 16-Point B7A Modules
9 Link Master Adapter Connect High-Density I/O PLC Modules to 16-Point B7A Modules 1 Adapter for Omron high-density I/O PLC modules connects 32 points, eliminates need for a second Link Interface module
Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks.
9 Relay I/O Block Reduces Wiring within the Control Panel and Reduces Installation Time 1 Compact 16-pt models: 182 W l 85 D l 68 H mm; 8-pt block width is 102 mm 1 Can be connected to the PLC with a connecting
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
SYSMAC Remote Transistor Module
9 SYSMAC Remote Transistor Module Ultra-compact Remote I/O Modules to Match Most Applications 1 4-point, 8-point and 16-point models 1 4-point models measure 82 W x 32 D x 64.5 H mm; 8- and 16-point models
Product Appearance Model Specifications Standards Master CVM1-DRM21-V1 For CVM1/CV Series U, C, CE. PC Card (provided with software
Ordering Information Product Appearance Model Specifications Standards Master CVM1-DRM21-V1 For CVM1/CV Series U, C, CE C200HW-DRM21-V1 For SYSMAC C200HS, C200HX, C200HG, and C200HE 3G8B3-DRM21-E VME Board
Transistor I/O Link Modules
9 Transistor I/O Link Modules Reduce Wiring Back to PLC Rack for 32 I/O Points 1 Transmit 16 input signals over just 2 wires (3 wires if only one terminal has a power supply) 1 Normal I/O delay (19.2 ms
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
masterelectronics.com onlinecomponents.com
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements (IEC 529) Monoblock construction assures high sealing capability
2. Actuator B: Ball type P: Pin type F: Flat type
Contact Displacement Sensor Built-in Amplifier Ensures Ease of Use and Saves Wiring Effort. Sensor Operates with a Low Force in a Wide Range of Applications. H Works with a low operating force (30 gf)
CQM1 THE FLEXIBLE, HIGH SPEED CONTROL SOLUTION
CQM1 THE FLEXIBLE, HIGH SPEED CONTROL SOLUTION CQM1 Controlling Quality with this Exceptional Machine Take control of your small machine applications with Omron s CQM1 PLC. It offers many hardware options,
Switching Power Supply S8E1. Ordering Information. Compact and Economical Switching Power Supply
Switching Power Supply Compact and Economical Switching Power Supply Models range from 10 to 50 W Open-frame and covered types Wide range of output voltage: 5-, 12-, 15- and 24-V models UL, CSA approved
Correction Reissue. Product Discontinuation Notices. Discontinuation Notice of CVM1/CV Series and C500 I/O series
PRODUCT NEWS Correction Reissue Product Discontinuation Notices May 9, 2011 Programmable Controllers No. 2011146E Discontinuation Notice of CVM1/CV Series and C500 I/O series REQUEST There was modification
Basic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements IEC 529 (lead wire type) Monoblock construction assures high
Miniature Inductive Prox TL-W
Miniature Inductive Prox Subminiature, Flat-Pack DC Sensor Fits Tight Spaces Watertight construction conforms to IP67 Space-saving mounting area, as small as 10 x 27 mm ( 0.39 x 1.06 in), is ideal for
Manual Swipe Magnetic Card Reader
R Manual Swipe Magnetic Card Reader Peripheral-type, Compact, Manually Operated Card Reader H Connects to the PC RS-232C port just like any other peripheral H Sits conveniently next to the PC keyboard
Snap Action Switch. General- Low force 25 g D2F-FL D2F-FL-T D2F-FL-D D2F-FL-A D2F-FL-A1
Snap Action Switch Subminiature Snap Action Switch Super compact, ideal for PCB mounting Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads (microvoltage/microcurrent)
ID Sensor Modules CJ1W-V600C11/V600C12 CS1W-V600C11/V600C12
ID Sensor Modules CJ1W-V600C11/V600C12 CS1W-V600C11/V600C12 Integrate Supply Chain Management with Work-in-Process Data Collection by RFID on the PLC Rack These Modules can be combined with OMRON s comprehensive
Sensing method Appearance Connection method Sensing distance Part number NPN output PNP output Through-beam Prewired (2 m) E3Z-T61A E3Z-T81A 10 m
Through-Beam Sensor with Visible Red LED Visible Beam Allows Visual Confirmation of the Detection Spot, for Easy Installation and Maintenance Built-in amplifier Mutual interference protection filter included
Temperature Controller E5C4
Temperature Controller 1/16 DIN Sized, Digital-Set Controller Features Easy-to-Read LED Display Proportional-derivative (PD) control or ON/OFF control models Front panel offset adjustment on PD controllers
Discontinued WIRING SYSTEM INDEX VALVES GENERAL CATALOG. Caution PC WIRING SYSTEM
VALVES GENERAL CATALOG WIRING SYSTEM INDEX Features 985 Wide Variation Units 987 Application Examples 989 Connection Examples 990 Features of Branch Units 991 Features of Terminal Blocks 992 Handling Instructions
General-Purpose Photoelectric Sensor
General-Purpose Photoelectric Sensor Compact Limit Switch Style with Universal Supply FET output allows for solid state switching of AC or DC Universal AC/DC power supply Choose cable or connector types
Converts the wiring of the 32-point I/O Unit connector into a terminal block, simplifying wiring and reducing the amount of wiring within the panel.
Peripheral Device Labor-saving Connectors Peripheral Devices Labor-saving Connectors Converts the wiring of the 32-point I/O Unit connector into a terminal block, simplifying wiring and reducing the amount
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Basic Switch SUBMINIATURE Subminiature Basic Switch Economical, subminiature
Electromagnetic Inductive RFID System
Electromagnetic Inductive RFID System 125-kHz Electromagnetic Inductive RFID System with Multi-Tag Read/Write Functionality Compact Read/Write Tags Ensure Long Communications Distance and Resist a Temperature
The diagram below shows how cables and I/O modules are connected to form a plug-and-go system.
CompoBus/S IP67 I/O Modules Waterproof input and output blocks make wiring a snap and replacement of sensors or actuators a quick twist of a connector. These IP67 rated blocks are perfect for plug-and-go
Z-15GW2277 Z-15GW2277-B
Basic Switch GENERAL PURPOSE General Purpose Basic Switch High precision basic switch in a variety of styles Wide margins of operating conditions increase the operating speed range Available in general
25 m 5 m 1 m. Part Number Mounting bracket. E39-LU1 Mounting bracket for E39-R1 reflector
Sensing distance Supply voltage 25 m 5 m 1 m General-Purpose Photoelectric Sensor Universal 24 to 240 VAC 24 to 240 VDC 3A, 250 VAC 400 ma 240 VAC 100 VDC Compact Limit Switch Style with Universal Supply
Motor Driven Card Reader/Writer
Motor Driven Card Reader/Writer 3S4YR-MM, MZ Reliable Reader/Writer Handles Magnetic Cards Single, triple, or center track read/write capability Compact size and light weight ease installation in any terminal
Reuse Terminal Block Wiring When Replacing PLCs. Terminal Block Conversion Adapters. Overview. Features. System Configuration
s CSM_X7G-CS - DS_E_1_1 Reuse Terminal Block iring hen Replacing PLCs 32-point Terminal Block Conversion s for Fujitsu Connectors X7G-CS01-1/CS01-2/CS01-3 16-point Terminal Block Conversion for One-slot
Chip Immune Inductive Prox E2EZ
Chip Immune Inductive Prox Sensor Immune to Metal Chip Accumulation, Ideal for Machine Tool Applications Detects work piece properly even when aluminum or iron chips collect on the sensing head during
DPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2
Safety Relay Unit Ultra Slim Safety Relay Unit 17.5 mm wide models available with 2 or 3 poles. 22.5 mm wide 3 pole models also available EN Standards (TÜV approval) DIN-track mounting possible Ordering
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPG AND DELIVERY TENS OF THOUSANDS OF -STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
G9SA. Ordering Information. Safety Relay Unit. The G9SA Series Offers a Complete Line of Compact Units. H Several types of 45-mm wide Units are
Safety Relay Unit The G9SA Series Offers a Complete Line of Compact Units H Several types of -mm wide Units are available: a -pole model, a -pole model, models with poles and OFF-delay poles H 7.-mm wide
H7ER H7ER-V H7ER-V1 H7ER-V2 H7ER-V3
Tachometers Subminiature Tachometer Requires No External Power Supply Subminiature 8 x 2 mm (1.89 x.9 in) Improved noise immunity Screw terminal and wire-wrap types available DC, and no-voltage input Printed
CPM1A MICRO PROGRAMMABLE CONTROLLERS
CPM1A MICRO PROGRAMMABLE CONTROLLERS Complete Small Scale Control The popular CPM1A family of micro PLCs now includes models with AC inputs. In one product family, you get cost- and space-efficient controllers
onlinecomponents.com
R General-Purpose Fiber-optic Sensor Compact Limit Switch Style with Universal Supply H FET output allows for solid state switching of AC or DC H Universal AC/DC power supply H Choose cable or connector
Round Water-resistant Connectors (M12) XS2
Round Water-resistant Connectors (M) XS Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant
Switching Power Supply S82J. Ordering Information. Open-Frame, Covered-Frame, or Enclosed-Frame Type with Capacity Up to 600 W
Switching Power Supply Open-Frame, Covered-Frame, or Enclosed-Frame Type with Capacity Up to 600 W Models range from 10 to 600 W UL 508 approval on 100-W 150-W, 300-W, and 600-W models Wide range of output
E2EC-CR8D2 5.4 mm dia. 1.5 mm (0.06 in) NO E2EC-C1R5D1 NC. E2EC-C1R5D2 8mmdia. 3 mm (0.12 in) NO E2EC-C3D1 NC
R Miniature Inductive Prox Subminiature Sensor with Inline Amplifier Offers Greater Mounting Flexibility H Subminiature, shielded sensing head (3-mm or 8-mm dia.) allows the Sensor to be flush-mounted
EE-SPX74/84. Ordering Information. Compact Sensor for High-Density Mounting with Easy Snap-In Connector. H Connector features a built-in safety
Compact for High-Density Mounting with Easy Snap-In Connector H Connector features a built-in safety lock for shock and vibration resistance H replacement made simple without rewiring H Cables can be bent
onlinecomponents.com
Universal Voltage Terminal Photoelectric Universal AC/DC Photoelectric Sensor with Built-in Timer Easy-to-wire terminal block Built-in timer offers selectable ON-delay, OFF-delay and one-shot Relay or
G3NE. Ordering Information. Solid State Relay. Compact, Low-cost, SSR Switching 5to20A J ACCESSORIES (ORDER SEPARATELY) Solid State Relay G3NE
Solid State Relay G3NE Compact, Low-cost, SSR Switching 5to20A D Wide load voltage range: 75 to 264 VAC. D Dedicated, compact aluminum PCB and power elements used. D Built-in varistor effectively absorbs
Functional configuration Rated input voltage Power ratings Output voltage Output current Part number Non-PFC
Switching Power Supply DIN-Rail Mount Power Supply With Capacity Up to 240 W for General or Industrial Applications Wide power range: 15 to 240 W 15 W and PFC Models with Universal voltage of 100 to 230
Capacitive Prox E2K-X
Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows
I/O delay. (0.32 in ±0.06 in)
R Inductive Power Couplers Allows Wireless Transmission of ON/OFF Signals from Input Devices and Power to Input Devices H Use the electromagnetic coupler to transmit input signals to the B7A Output Unit
Wiring Systems I/O Blocks, I/O Terminals, and I/O Block Bases
Wiring Systems I/O Blocks, I/O Terminals, and I/O Block Bases Wiring Systems Programmable Controllers G7@ Relay I/O Blocks and Cables 383 G70A I/O Terminal Bases 386 G70D Relay Output Terminal Blocks 387
Capacitive Prox E2K-X
Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows
Without Indicator. With Indicator Model XM9B XM9B Contact Plating Specification 4: Gold Flash Plating
LAN Modular Jack Connectors XM9B Compact LAN Modular Jack Connectors Category 5e transmission performance met for 1, 2-3, 6 pairs. (Verified with connection to Omron XS5W-T421.) Models available with and
Safety Relay Unit (I/O Unit Type)
Safety Relay Unit (I/O Unit Type) CQM1-SF200/ CS1W-SF200 Same Dimensions as I/O Unit Less Installation Space and Wiring Required Safety Relay Unit that can be used as an I/O Unit for OMRON s CQM1H and
onlinecomponents.com
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
Miniature Enclosed Limit Switch
Miniature Enclosed Limit Switch Economical, General-Purpose, Enclosed Switch High precision and long life (,000,000 mechanical operations) Gasket diaphragm seal provides high environmental resistance Suitable
PRODUCT OVERVIEW CQM1H
PRODUCT OVERVIEW CQM1H Programmable Controller Features The CQM1H series programmable controller offers advanced flexibility, powerful communication options, and has features traditionally found only in
Adjustable Capacitive Prox E2K-C
Adjustable Capacitive Prox Cylindrical Sensor Offers Adjustable Detecting Distance Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows
CPU Rack Expansion Racks C200H Basic I/O Modules B7A Terminals Link Master Adapters for High-density I/O PLC Modules
ORDERING GUIDE PRODUCT PERFORMANCE STANDARDS OMRON devices that comply with EC Directives also conform to the related EMC standards so that they can be more easily built into other devices or the overall
Special-Purpose Photoelectric Sensors
Special-Purpose Photoelectric Sensors Miniature Sensors with Separate Amplifiers Fit Tight Spaces Fast, 1 ms response time Light incident indicator on sensor Dust-resistant flat lens surface New, thin
Fiber-Optic System for Sensing Under Vacuum. Vacuum chamber E39-F1V Lens Unit
R Fiber-Optic System for Sensing Under Vacuum Omron s First Complete System for Sensing Under Vacuum H Vacuumratedto1x10-1 0 Pa S m /s max. (.5 x 10-10 torr S l/s) H The industry s First -Channel Snap-On
OMRON Corporation PLC SYSMAC C Series Connection
OMRON Corporation PLC SYSMAC C Series Connection System Structure GP Machine Model Remark GP GLC GP70 Series GP77/77R Series GP2000 Series GLC2000 Series Excepting for handy types. OMRON SYSMAC-C Series
E2K-C25MY1 E2K-C25MY2
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-6 3 Ph: 4353 8888 Mob: 99 4353 8888 Fax: 44 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Sensing Supply voltage
Inductive Proximity Sensor
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Sensing distance Supply Output 20 to
EE-SX470/471/472/473/474/670/671/672/673/674(P)
R Photomicrosensor with 50 ma (PNP) or 100 ma (NPN) Switching Capacity that can be Built into Equipment Standard, -shaped, T-shaped, and close mounting models available Easy to maintain, plugs into Connector
Chemical Resistant Inductive Prox
Chemical Resistant Inductive Prox Fluoroplastic Housing Sensor Performs Accurately Under Harsh Environmental Conditions Full body resin housing and nuts resist weld spatter Rugged watertight fluoroplastic
NT631/NT31 OPERATOR INTERFACE TERMINALS
NT631/NT31 OPERATOR INTERFACE TERMINALS Take Control of Your Process with Omron Omron s new NT631 and NT31 operator interface touch screens are sleekly styled windows into your system, graphically conveying
Switching Power Supply S82G. Ordering Information. Dependable Power Supply for Demanding Industrial Applications
Switching Power Supply Dependable Power Supply for Demanding Industrial Applications Power rating range from 30 to 0 W Wide range of output voltage: 5, 12,, and 24 V Field-selectable input voltage 120
Plastic Cylindrical Inductive Prox
Plastic Cylindrical Inductive Prox Short Length, Shielded Sensors With Threaded Plastic Body Rugged, watertight plastic housing offers good chemical resistance and withstands washdown Wide operating voltages:
Digital Timer. Ordering Information. 1/16 DIN, Quartz Timer with Four-Digit LED Display
Digital Timer 1/16 DIN, Quartz Timer with Four-Digit LED Display Five wide ranges to choose from Wide-range AC or DC supply voltages Elapsed time (UP) or time remaining (DOWN) display available Selectable
Digital Controller-Version II ES100X/P. Ordering Information. Intelligent Digital Controller and Programmer
Digital Controller-Version II Intelligent Digital Controller and Programmer Programmed with easy-to-use support software (ES Tools) or use front panel Use fuzzy fine-tuning to easily accomplish precise
High Function Touch Screens - NT21 / NT31 / NT631
High Function Touch Screens - NT21 / NT31 / NT631 Software NT21/31/631 NT20S/600S NT11S NT2S Highlights Get the Most from Your Omron PLCs The NT21/NT31/NT631 operator interface products create superior
Type Terminal Block Connector No. of poles Appearance Model 40 XW2B-40G4 50 XW2B-50G4 40 XW2B-40G5 *1 50 XW2B-50G5 60 XW2B-60G5 40 XW2B-40G5-T
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
A Controller That Provides Open Development Platform and Maintenance Environment Using PC/AT Architecture. Open PLC
A Controller That Provides Open Development Platform and Maintenance Environment Using PC/AT Architecture Open PLC :C200PC-CPU01-R :C200PC-CPU15-G Highly adaptability to standard Operating Systems and
CS1 PROGRAMMABLE CONTROLLER SERIES
CS1 PROGRAMMABLE CONTROLLER SERIES Conquering the demands of an automation environment Between intense competition and customer demands, there is little room for error. Your challenges include ever changing
CPM1A SERIES MICRO PLCs
Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com CPM1A SERIES
Maintenance information. DRT2-series. Remote I/O Terminals Relay Output Terminals. DRT2-series Smart Slave Analog I/O Terminals.
CS-series Net Unit CSM DS_E_5_3 A Net Unit for the CS Series That Boasts Industry-leading Performance and Functions Features Allows control of up to 32,000 points (2,000 words) per master, and ensures
Solid-State Counter/Timer
Solid-State Counter/Timer 1/16 DIN, Easy-to-Operate Combination Counter and Timer Operation selectable as preset counter or timer 6-digit LCD display Present Value: 8 mm (0.32 in) Set Value: 4 mm (0.16
Type Terminal Block Connector No. of poles Appearance Model 40 XW2B-40G4 50 XW2B-50G4. 40 XW2B-40G5 Flat Cable Connectors
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
onlinecomponents.com
CPU Backplane A consists of a CPU, Power Supply Unit, CPU Backplane, Basic I/O Modules, Special I/O Modules, and CPU Bus Modules. The Serial Communications Board and Memory Cards are optional. The Backplane
Type Pressure range description Part number
Sensor Four-channel Sensor Offers Versatile Functions and High Precision without Errors The industry s smallest pressure sensor, compact, lightweight ideal for robot arms or other moving components A highly
Round Water-resistant Connectors (M8) XS3
Round Water-resistant Connectors () XS Compact, Watertight, Round Connectors Water-resistive, compact connector meets IP67 requirements. Ideal for a wide variety of FA and OA applications. Using connectors
CS1 Series, C200HX/HG/HE, C200HS DeviceNet (CompoBus/D)
Product Specifications C200H Special I/O Unit CS1 Series, C200HX/HG/HE, C200HS DeviceNet () Master Unit: C200HW-DRM21-V1 Slaves: DRT1 Series Configurators: 3G8F5-DRM21, 3G8E2-DRM21 Multivendor, Multibit
Note: Do not use this document to operate the Unit. OMRON Corporation. CJ1M-CPU22/23 Models with built-in I/O
CJ1M-CPU22/23 Models with built-in I/O Connecting Cable for Unit XW2Z-100J-A26 (1 m) Connecting Cable for SMARTSTEP A Series XW2Z-100J-B5 (1 m) XW2Z-200J-B5 (2 m) Servo Relay Unit XW2B-20J6-8A (for one
955S BRIK. Series 955S Brik. Smart BRIK LDT ABSOLUTE PROCESS CONTROL KNOW WHERE YOU ARE... REGARDLESS. Linear Displacement Transducer
Series 955S Brik Linear Displacement Transducer Installation Manual 955S BRIK Smart BRIK LDT ABSOLUTE PROCESS CONTROL KNOW WHERE YOU ARE... REGARDLESS Introduction The 955S Smart Brik is an accurate programmable,
XS2. Water- and Environmentresistive. Wiring and Maintenance Effort. Sensor I/O Connectors (M12) Construction (XS2G Soldering Plug Connector Assembly)
I/O (M) XS XS/XS /XW XS XN XWB XS XS Water- and Environmentresistive FA Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant rating. A wide
Digital I/O Units Compatible with MULTIPLE I/O TERMINAL
Digital I/O Units T-@D(-)/@DMX(-)/@DML(-)/@DML(-)/@DDS(-) Digital I/O Units Compatible with MULTIPLE I/O TERMAL Terminal block, connector, and high-density connector models are available. The circuit block
CS1 Series Programmable Controller
System Overview CS1 Series Programmable Controller CPU Overview Basic System Configuration I/O Types and Allocations Modules Peripheral Hardware and Software Instruction Set Ordering Guide Reference Information
Miniature Inductive Prox TL-W
Miniature Inductive Prox Subminiature, Flat-Pack DC Sensor Fits Tight Spaces Watertight construction conforms to IP67 Space-saving mounting area, as small as 10 x 27 mm ( 0.39 x 1.06 in), is ideal for
PRODUCT OVERVIEW. DeviceNet Communications Module for NT31/NT631. DeviceNet
PRODUCT OVERVIEW Communications Module for NT31/NT631 The NT31/NT631 operator interfaces can now communiate with a PLC over using the NT-DRT21 module. Touch screens can be located at convenient locations
Device/PLC Connection Manuals
Device/PLC Connection Manuals About the Device/PLC Connection Manuals Prior to reading these manuals and setting up your device, be sure to read the "Important: Prior to reading the Device/PLC Connection
Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB
Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to
Device/PLC Connection Manuals
Device/PLC Connection Manuals About the Device/PLC Connection Manuals Prior to reading these manuals and setting up your device, be sure to read the "Important: Prior to reading the Device/PLC Connection
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
OMRON Corporation PLC SYSMAC C Series Connection
OMRON Corporation PLC SYSMAC C Series Connection System Structure GP Machine Model Remark GP GLC GP70 Series GP77/77R Series GP2000 Series GLC2000 Series Excepting for handy types. OMRON SYSMAC-C Series
Actuator Series Common to Miniature, V-Size models
V/VX/D3V Common Accessories Ordering Information Actuators (Sold Separately) Actuators are supplementary components used when operating pin plunger switches using cams or dogs or when transmitting mechanical
SiO Controller. SiO Controller. SiO-C Ver onwards SiO2/SiO2PNP Ver onwards SiO3 Ver onwards INSTRUCTION MANUAL. Version 3.
SiO Controller SiO-C Ver. 2.00 onwards SiO2/SiO2PNP Ver. 1.00 onwards SiO3 Ver. 1.00 onwards INSTRUCTION MANUAL Version 3.2 WARRANTY RANGE Warranty Period 1 year period after date of purchase 1. This product
New Products Programmable Slaves SYSMAC CPM2C CPU Units with CompoBus/S Master Functions Waterproof Terminals Sensor Terminals Remote I/O Modules
CompoBus/S Cat. No. Q103-E1-7 New Products Programmable Slaves SYSMAC CPM2C CPU Units with CompoBus/S Master Functions Waterproof Terminals Sensor Terminals Remote I/O Modules Maximum Communications Cycle
Innovation First, Inc Full-Size Robot Controller Reference Guide
2004 Full-Size Robot Controller Reference Guide 2.19.2004 www.innovationfirst.com Page 2 Table of Contents 1. Robot Controller Overview... 3 2. Main Power Input... 4 3. Battery Backup Power... 4 4. PROGRAM...
Ordering Information. Door Interlock Switch D2D. Power Switch with Minimum Contact Gap up to 3 mm. D2D - 0. Model Number Legend
Door Interlock Switch D2D Power Switch with Minimum Contact Gap up to 3 mm. Minimum contact gap of 3 mm (standard models), needed in general power switches, is provided. Mechanism with double return spring
MODEL: CND. Multiplex Transmission System
POW RUN SA1 SA2 MODEL: CND Multiplex Transmission System ADAPTOR CONNECTOR Functions & Features Simplifies wiring wk between multiplex transmission units (DLA1) and 10-RACK, 15-RACK and signal conditioner
Appendix 3 Using NS-AL002 Converters
Appendix 3 Using Converters The RS-232C/RS-422A Converter is connected directly to RS-232C port A or B of the, and converts RS-232C communications to RS-422A/RS-485. Any of the Converters listed in Appendix
TECHNICAL PRODUCT DATASHEET
FORM-ENG-0018 REV A 06-02-03 ISO 9001 CERTIFIED Phone: (352) 629-5020 or 800-533-3569 Fax: (352)-629-2902 SUITABLE FOR EXTERNAL DISTRIBUTION TECHNICAL PRODUCT DATASHEET ES-Key Climate Control Module P/N
Ordering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121
Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.