TP6836. USB 2.4G RF Dongle. Data Sheet
|
|
|
- Marjorie Henry
- 6 years ago
- Views:
Transcription
1 TP6836 Data Sheet tenx reserves the right to change or discontinue the manual and online documentation to this product herein to improve reliability, function or design without further notice. tenx does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others. tenx products are not designed, intended, or authorized for use in life support appliances, devices, or systems. If Buyer purchases or uses tenx products for any such unintended or unauthorized application, Buyer shall indemnify and hold tenx and its officers, employees, subsidiaries, affiliates and distributors harmless against all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use even if such claim alleges that tenx was negligent regarding the design or manufacture of the part. 1 tenx technology inc.
2 AMENDMENT HISTORY Version Date Description V1.0 Nov, 2011 New release 2 tenx technology inc.
3 CONTENTS AMENDMENT HISTORY GENERAL DESCRIPTION FEATURES Function Block Diagram PIN Assignment CPU Operation Mode vs. Peripheral Clock Package Application Circuit Electrical Characteristics tenx technology inc.
4 1. GENERAL DESCRIPTION The TP6836 is an 8051 embedded device tailored to the USB full speed Game Pad controller application. TP6836 is designed for connecting to PC. It also supports powerful functions and interfaces, such as USB Keyboard, USB Mouse, USB Joystick, USB HID, PWM 2 channels of Pulse Width Modulation, master/slave SPI and RF 2.4G and Bluetooth control interface, G-sensor control interface. 2. FEATURES (1). Operation Frequency FAST mode: 24 MHz crystal oscillation with internal 48 MHz PLL at 5.0V for USB mode SLOW mode: Adjustable ext. R/C, RC oscillator at 2.0V~3.6V for battery system (optional) STOP mode (2). On-Chip Memory 16k x 8 internal program OTP-ROM Internal RAM 256 bytes and external XRAM up to 384 bytes (3). PWM Support 2 channels of Pulse Width Modulation (PWM) function with 8-bit resolution (4). Reset Controller Power On Reset, Low Voltage Reset, Watch-Dog Timer, USB Plug-out Reset (5). SPI interface Support Mode 0, 1, 2, 3 1x Master/Slave (Tx FIFO 8*8 bytes, Rx FIFO 8*8 bytes) Clock rate up to 6 Mbps (6). Keep SRAM data when USB un-plug (need battery) (7). I/O Ports 4 external Interrupts with wakeup function (8). LQFP48/ Die Form (9). Application Keyboard Dongle application Mouse Dongle application Presenter Dongle application Game Pad Dongle application RF 2.4G wireless Dongle application 4 tenx technology inc.
5 3. Function Block Diagram 16K x 8 OTP ROM 256 Bytes SRAM Wireless RF Module USB Transceiver USB Controller USB SIE 8051 MCU Six 64-Byte Buffer Master/Slave SPI UART Interface 5 tenx technology inc.
6 4. PIN Assignment 6 tenx technology inc.
7 PIN Description Name I/O Description VDD P 5V Power from USB cable VSS P Ground VBAT P Battery power VIO O Chip I/O voltage (1.8V/3.0V/3.3V/5V/VBAT by chip configuration) FX1 I Crystal in (24 MHz) FX2 O Crystal out LX1 I Crystal in (32 KHz) LX2 O Crystal out OSCI I RC clock, external capacitor and resistor VPP/RESETn I OTP programming power/chip reset pin TESTn[1:0] I Test Mode control V33 O 3.3V regulator output DP I/O USB positive data signal DM I/O USB negative data signal D[7:0] I/O 8051 s D[0..7] I/O KEY[1..19] Keys CHR_EN O Battery charge enable CHR_SS Battery charge state USB_EN O USB enable RF_PKT I RF Packet flag RF_RST O RF Reset RF_CS O RF Chip enable B_CLK SPI DATA Clock B_DO SPI DATA Output B_DI SPI DATA In RF_CS O RF Chip enable G_CS O G-Sensor enable M_CS O Memory enable POW_EN O Low power mode enable PWMA O LED2 and PWMA Output PWMB O LED1 and PWMB Output All I/O ports are pseudo-open drain type. I/O voltage fixes 3.3V, unless otherwise specified. 7 tenx technology inc.
8 5. CPU Operation Mode vs. Peripheral Clock DUAL MODE (Note-1) SLOW (Note-2) FAST (Note-2) SIGNLE MODE(1) CPUCLK(CPU51) RC osc 24 MHz 24 MHz USB function N/A 48 MHz 48 MHz UART N/A 48 MHz 48 MHz SPI CPUCLK CPUCLK CPUCLK WDT CPUCLK CPUCLK CPUCLK Smart Card CPUCLK CPUCLK CPUCLK PWM CPUCLK CPUCLK CPUCLK 0.5 sec timer wakeup Interrupt 0.5 sec 0.5 sec 0.5 sec NOTE If 32 KHz Xtal (Note-3) is available Note: 1. & 3. function enable/disable control by FUSE option. 2. CPU clock mode switching control by firmware. 6. Package LQFP48: 8 tenx technology inc.
9 7. Application Circuit 9 tenx technology inc.
10 8. Electrical Characteristics (1). ABSOLUTE MAXIMUM RATINGS (GND= 0V) Name Symbol Range Unit Maximum Supply Voltage VDD -0.3 to 5.5 V Maximum Input Voltage Vin -0.3 to VDD+0.3 V Maximum output Voltage Vout -0.3 to VDD+0.3 V Maximum Operating Temperature Topg -5 to +70 Maximum Storage Temperature Tstg -25 to +125 (2). RECOMMENDED OPERATING CONDITION (at Ta=-20 to 70, GND= 0V) Name Symb. Min. Max. Unit Supply Voltage(USB mode) VDD V Battery Voltage(battery mode) Vbat V Chip I/O Voltage Vio V Input L Voltage Vil xVio V (3). DC CHARACTERISTICS (at Ta=25, VDD=5.0V, VSS= 0V, Fosc=24 MHz) Name Symb. Min. Typ. Max. Unit Condition Note FAST clock fclk 24 MHz SLOW clock sclk -30% 1 +30% MHz VBAT=3.0V, VDD=NC ExtC=750 pf, ExtR=1K Threshold voltage of USB detection Vdet 4.2 V Icc ma Fosc=24 MHz No load Operating current 24 MHz off, Fosc=1 MHz Icc2 1.4 ma VBAT=3.0V, VDD=N.C. No load Suspend current Isus ua USB mode No load Power down current Port Output High Current Port Output Low Current VIO pin voltage Port Input High Voltage Ipd1 1 ua RC mode, no 32 KHz No load Ipd2 3 5 ua RC mode with 0.5s wakeup, disable Wakeup Int No load Ioh1 6 ma Ioh2 8 ua Ioh3 2.6 ma Ioh4 4 ua Iol1 8 ma Iol2 4 ma Voh=Vio-0.4V, Vio>=3.0V Voh=Vio-0.4V, Vio =1.8V Vol=VSS+0.2V, Vio >=3.0V Vol=VSS+0.06V, Vio =1.8V One clk time One clk time Vio V I=40 ma Vio set 1.8V Vio V I=80 ma Vio set 3V Vio V I=120 ma Vio4 Vio5 VDD- 0.1 Vbat- 0.1 Vio tie to V33 VDD V Vio set 5V Vbat V No PC5V, battery only Vih 0.55Vio V Schmitt trigger 10 tenx technology inc.
11 (4). AC CHARACTERISTICS (at Ta=25, VDD5V=5.0V, VSS= 0V, Fosc=24 MHz) Name Symb. Min. Typ. Max. Unit Note DP/DM rising time Trise 4 20 ns DP/DM falling time Tfall 4 20 ns DP, DM cross point Vx V V33 output voltage Vreg V Note: All USB transceiver characteristics can meet USB1.1 spec. 11 tenx technology inc.
TP6825. USB Full Speed Game Pad Controller. Data Sheet. Tenx reserves the right to change or discontinue this product without notice.
Advance Information TP6825 USB Full Speed Game Pad Controller Data Sheet Tenx reserves the right to change or discontinue this product without notice. tenx technology, inc. Contain 1. GENERAL DESCRIPTION...
TR1002. PLL for DTS IC. Data Sheet
TR1002 PLL for DTS IC Data Sheet tenx reserves the right to change or discontinue the manual and online documentation to this product herein to improve reliability, function or design without further notice.
High Speed 10-bits LVDS Transmitter EP103. User Guide V0.6
High Speed 10-bits LVDS Transmitter EP103 User Guide V0.6 Revised: Feb 16, 2007 Original Release Date: Oct 31, 2003, Taiwan reserves the right to make changes without further notice to any products herein
FT6336G. Self-Capacitive Touch Panel Controller INTRODUCTION FEATURES
FT6336G Self-Capacitive Touch Panel Controller INTRODUCTION The FT6336G are single-chip capacitive touch panel controller IC with a built-in 16 bit enhanced Micro-controller unit (MCU).They adopt the self-capacitance
M68HC705E6PGMR PROGRAMMER USER'S MANUAL
M68HC705E6PGMR/D2 nc. Oct 1993 M68HC705E6PGMR PROGRAMMER USER'S MANUAL Motorola reserves the right to make changes without further notice to any products herein to improve reliability, function or design.
USB/Charger and Over-Voltage Detection Device
FAN3988 USB/Charger and Over-Voltage ion Device Features Charger/USB ion Device Charger/USB Device ion Flag Over-/Under-Voltage ion Flag V BUS Supply: 2.7 V to 20 V C ON of 1.5 pf 6-Lead MicroPak MLP Package
Freescale Semiconductor, I
M68HC705X4PGMR/D1 August 1991 M68HC705X4 PROGRAMMER BOARD (REVision A PWBs only) INTRODUCTION This application note describes the programming technique used to program and verify the XC68HC705X4 microcontroller
LB1868. Specifications Absolute Maximum Ratings at Ta = 25 C. Monolithic Digital IC 2-phase Brushless Fan Motor Driver. Ordering number : EN6202A
Ordering number : EN60A Monolithic Digital IC -phase Brushless Fan Motor Driver http://onsemi.com Overview The is a -phase unipolar brushless motor driver. With only a few peripheral parts, lockup protection
WT6510. USB Keyboard Controller (Mask ROM Type)
WT6510 USB Keyboard Controller (Mask ROM Type) REV 110 25, May, 2000 Weltrend Semiconductor, Inc All Rights Reserved 1!"#$%$&'%() &*$&+&& %,-/01 2-/01 // %,- //012,- //01 3!4,56!&&5 3!4,786!&&5 #9$,&:,
VREG_3V3 Block User Guide V02.03
DOCUMENT NUMBER S12VREG3V3V2/D VREG_3V3 Block User Guide V02.03 Original Release Date: 12 Jul 2001 Revised: 22 Jun 2004 Semiconductor Products Sector Motorola, Inc Motorola reserves the right to make changes
LC75700T/D. Key Scanning IC
Key Scanning IC Overview The LC75700T is a key scanning LSI that accepts input from up to 30 keys and can control up to four general purpose output ports. Therefore it can reduce the number of lines to
M68HC705E24PGMR PROGRAMMER USER'S MANUAL
M68HC705E24PGMR/D Rev. 2 March 1995 M68HC705E24PGMR PROGRAMMER USER'S MANUAL Third Edition MOTOROLA Ltd., 1993, 1995; All Rights Reserved Motorola reserves the right to make changes without further notice
TouchCore351-ML16IP. Capacitive Touch Sensor Controller
Total Solution of MCU TouchCore351-ML16IP Capacitive Touch Sensor Controller CORERIVER Semiconductor reserves the right to make corrections, modifications, enhancements, improvements, and other changes
Table 1 Brief Specifications
Rev.1.1 MICROCOMPUTER WITH BUILT-IN PAGING DECODER The microcomputer incorporates a decoder conforming to CCIR Radio Paging Decode 1(POCSA Code), a melody generator, an LCD driver and a timer. Only attaching
VREG_3V3 Block User Guide V03.03
DOCUMENT NUMBER S12VREG3V3V3/D VREG_3V3 Block User Guide V03.03 Original Release Date: 12 Jul 2001 Revised: 12 Jan 2004 Semiconductor Products Sector Motorola, Inc Motorola reserves the right to make changes
LC75832E, LC75832W Static Drive, 1/2-Duty Drive General-Purpose LCD Driver
Static Drive, 1/2-Duty Drive General-Purpose LCD Driver Overview The LC75832E and 75832W are static drive or 1/2-duty drive, microcontroller-controlled general-purpose LCD drivers that can be used in applications
ASM5P2308A. 3.3 V Zero-Delay Buffer
3.3 V Zero-Delay Buffer Description ASM5P2308A is a versatile, 3.3 V zero delay buffer designed to distribute high speed clocks. It is available in a 16 pin package. The part has an on chip PLL which locks
MC74F620 MC74F623 OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS (INVERTING AND NONINVERTING)
OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS (INVERTING AND NONINVERTING) The MC6 is an octal bus traceiver featuring inverting 3-state buscompatible outputs in both send and receive directio. The BN outputs
Register Programmable Clock Generator AK8141
ASAHI KASEI EMD CORPORATION Register Programmable Clock Generator Features Input Frequency: 48MHz/24MHz/12MHz/27MHz (Selectable) Output Frequency: 27MHz 50MHz by 1MHz step, 33.75MHz/40.5MHz/49.5MHz (Selectable)
FT6x06. Self-Capacitive Touch Panel Controller INTRODUCTION FEATURES
Self-Capacitive Touch Panel Controller INTRODUCTION The FT6x06 Series ICs are single-chip capacitive touch panel controller ICs with a built-in 8 bit enhanced Micro-controller unit (MCU).They adopt the
1.8V/3.0V Single-PLL Clock Generator AK8150C
AK8150C 1.8V/3.0V Single-PLL Clock Generator AK8150C Features Input Frequency: 38 MHz (1.8V or 3.0V) PLL Output Frequency: 12 MHz (1.8V or 3.0V) REF Output Frequency: 38 MHz or 19 MHz (1.8V or 3.0V) Low
N551C321. Table of Contents-
Table of Contents- 1. GENERAL DESCRIPTION... 2 2. FEATURES... 2 3. BLOCK DIAGRAM... 3 4. PIN DESCRIPTION... 3 5. ABSOLUTE MAXIMUM RATINGS... 4 6. ELECTRICAL CHARACTERISTICS... 4 7. APPLICATION CIRCUIT...
NCP370GEVB. NCP370 Over Voltage Protection Controller with Reverse Charge Control Evaluation Board User's Manual EVAL BOARD USER S MANUAL
NCP370 Over Voltage Protection Controller with Reverse Charge Control Evaluation Board User's Manual Description The NCP370 is an overvoltage, overcurrent and reverse control device. Two main modes are
1.8V/3.0V Single-PLL Clock Generator
ASAHI KASEI EMD CORPORATION 1.8V/3.0V Single-PLL Clock Generator Features Input Frequency: 36 MHz (1.8V or 3.0V) PLL Output Frequency: 12 MHz (1.8V or 3.0V) REF Output Frequency: 36 MHz or 18 MHz (1.8V
ILI2303. ILI2303 Capacitive Touch Sensor Controller. Specification
Capacitive Touch Sensor Controller Specification Version: V1.03 Date: 2014/9/17 ILI TECHNOLOGY CORP. 8F, No.38, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Tel.886-3-5600099; Fax.886-3-5600055
AND9407/D Low Power Techniques of LC Series for Audio Applications
Low Power Techniques of LC823450 Series for Audio Applications Introduction This application note describes low power techniques to enable customers to control the power consumption to meet their operation
ILI2511. ILI2511 Single Chip Capacitive Touch Sensor Controller. Specification ILI TECHNOLOGY CORP. Version: V1.4. Date: 2018/7/5
Single Chip Capacitive Touch Sensor Controller Specification Version: V1.4 Date: 2018/7/5 ILI TECHNOLOGY CORP. 8F., No.1, Taiyuan 2 nd St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) Tel.886-3-5600099;
CM1621. LCD and Camera EMI Filter Array with ESD Protection
LCD and Camera EMI Filter Array with ESD Protection Features Six Channels of EMI Filtering with Integrated ESD Protection Pi Style EMI Filters in a Capacitor Resistor Capacitor (C R C) Network ±15 kv ESD
Pd max2 Mounted on a board * 1.85 W Operating temperature Topr -30 to +85 C Storage temperature Tstg -55 to +150 C
Ordering number : ENA0954 LB11683H Monolithic Digital IC Three-Phase Sensorless Motor Driver http://onsemi.com Overview The LB11683H is a three-phase full-wave current-linear-drive motor driver IC. It
THM3060. Multiple Protocols Contactless Reader IC. Features. Pinning Diagram
THM3060 Multiple Protocols Contactless Reader IC Features Compatible with ISO/IEC 14443 A/B Support higher baudrate up to 848 Kbit/s Compatible with ISO/IEC 15693 Host interface selectable: UART,SPI and
LE24512AQF. Overview. Functions. CMOS IC Two Wire Serial Interface EEPROM (512k EEPROM)
Ordering number : ENA2087 LE24512AQF CMOS IC Two Wire Serial Interface EEPROM (512k EEPROM) http://onsemi.com Overview The LE24512AQF (hereinafter referred to as this device ) is a two-wire serial interface
NUF2221W1T2. USB Upstream Terminator with ESD Protection
Upstream Terminator with ESD Protection This device is designed for applications requiring Line Termination, EMI Filtering and ESD Protection. It is intended for use in upstream ports, Cellular phones,
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
VREG_3V3 Block User Guide V05.03
nc. DOCUMENT NUMBER S12VREG3V3V5/D VREG_3V3 Block User Guide V05.03 Original Release Date: 12 Jul 2001 Revised: 09 Sep 2004 Semiconductor Products Sector Motorola, Inc Motorola reserves the right to make
Preliminary TK23H256 High Temperature ROM
Preliminary TK23H256 High Temperature ROM June 06, 2018 Product Proposal Features o 262,144 bit ROM o Up to 300 o C Operation o -100 ns Access Time (5V) o Fully Non-Volatile o 2.7V to 5.5V operation o
DEMO9S08AC60E. User s Guide. Freescale Semiconductor User s Guide. DEMO9S08AC60EUG Rev. 0.1, 11/2007
Freescale Semiconductor User s Guide DEMO9S08AC60EUG Rev. 0.1, 11/2007 DEMO9S08AC60E User s Guide Freescale Semiconductor, Inc., 2007. All rights reserved. How to Reach Us: USA/Europe/Locations not listed:
Product Data Sheet FT5302. Capacitive Touch Panel controller. FocalTech Systems Co., Ltd
Date: 31-Mar-10 FT5302 Capacitive Touch Panel controller FocalTech Systems Co., Ltd support@focaltech-systems.com THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO FOCALTECH SYSTEMS CO.,LTD., AND MAY NOT
SN8F5000 Starter-Kit User Manual
SONiX Technology Co., Ltd. User Manual 8051-based Microcontroller 1 Overview of Starter Kit provides easy-development platform. It includes SN8F5000 family real chip and I/O connectors to input signal
Features. Description. Applications. Block Diagram PT7M3808. Fixed Voltage Diagram. Adjustable Voltage Diagram(PT7M3808G01)
Features Description Power-On Reset Generator with Adjustable Delay Time: 1.25ms to 10s. Very Low Quiescent Current: 2.8µA Typical High Threshold Accuracy: 0.5% Typ. Fixed Threshold Voltages for Standard
KIT34901EFEVB Evaluation Board
Freescale Semiconductor, Inc. User s Guide Document Number: KT34901UG Rev. 1.0, 2/2014 KIT34901EFEVB Evaluation Board Featuring the MC34901 High Speed CAN Transceiver Contents Figure 1. KIT34901EFEVB Evaluation
LE2416RLBXA. Overview. Functions. CMOS IC Two Wire Serial InterfaceEEPROM (16k EEPROM)
Ordering number : ENA2070 LE2416RLBXA CMOS IC Two Wire Serial InterfaceEEPROM (16k EEPROM) http://onsemi.com Overview The LE2416RLBXA is a 2-wire serial interface EEPROM. It realizes high speed and a high
MC13853 Tri-Band Low Noise Amplifiers with Bypass Switches Device
Freescale Semiconductor Technical Data Document Number: MC18 Rev. 1.8, 8/2008 MC18 MC18 Tri-Band Low Noise Amplifiers with Switches Device Package Information Plastic Package (QFN) Ordering Information
PWM INTELLIGENT POWER HIGH SIDE SWITCH
July, 2nd 2010 Automotive grade PWM INTELLIGENT POWER HIGH SIDE SWITCH Features Integrated bootstrap for 100kHz switching Charge pump for DC operation Over temperature shutdown Over current shutdown 3.3V
CM1219. Low Capacitance Transient Voltage Suppressors / ESD Protectors
Low Capacitance Transient Voltage Suppressors / ESD Protectors Description The family of devices features transient voltage suppressor arrays that provide a very high level of protection for sensitive
LE24L042CS-B. Overview. Functions. CMOS IC Two Wire Serial Interface EEPROM (4k EEPROM)
Ordering number : ENA2068 CMOS IC Two Wire Serial Interface EEPROM (4k EEPROM) http://onsemi.com Overview The is a 2-wire serial interface EEPROM. It realizes high speed and a high level reliability by
Figure 1: TSSOP-24 ( Top View ) Figure 2: TQFN 4x4-24 ( Top View )
16-bit I2C-bus and SMBus I/O port with interrupt Features Operation power supply voltage from 2.3V to 5.5V 16-bit I/O pins which can be programmed as Input or Output 5V tolerant I/Os Polarity inversion
LB1868M. Specifications Absolute Maximum Ratings at Ta = 25 C. Monolithic Digital IC 2-phase Brushless Fan Motor Driver. Ordering number : EN6203A
Ordering number : EN6203A LB1868M Monolithic Digital IC 2-phase Brushless Fan Motor Driver http://onsemi.com Overview The LB1868M is a 2-phase unipolar brushless motor driver. With only a few peripheral
AND8335/D. Design Examples of Module-to-Module Dual Supply Voltage Logic Translators. SIM Cards SDIO Cards Display Modules HDMI 1-Wire Sensor Bus
Design Examples of Module-to-Module Dual Supply Voltage Logic Translators Prepared by: Jim Lepkowski ON Semiconductor Introduction Dual supply voltage logic translators connect modules or PCBs together
USB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup using a USB Debug Adapter
C8051F38X DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The C8051F38x Development Kit contains the following items: C8051F380 Target Board C8051Fxxx Development Kit Quick-start Guide Silicon Laboratories
SONIX 8-BIT MCU OTP Easy Writer
SONIX 8-BIT MCU OTP Easy Writer User s Manual General Release Specification SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design.
Freescale Semiconductor, I
SEMICONDUCTOR APPLICATION NOTE Order this document by AN65/D Prepared by: Bill Lucas and Warren Schultz A plug in module that is part of a systems development tool set for pressure sensors is presented
LA6584JA. Functions and Applications Single-phase full-wave driver for fan motor. Specitications
Ordering number : ENA2125 Monolithic Linear IC Single-phase Full-wave Driver For Fan Motor http://onsemi.com Overview The is Single-phase bipolar fan motor is put into silent driving by means of BTL output
CM DE. 4-Channel LCD and Camera EMI Filter Array with ESD Protection
CM1408-04DE 4-Channel LCD and Camera EMI Filter Array with ESD Protection Features Four Channels of EMI Filtering with Integrated ESD Protection Pi Style EMI Filters in a Capacitor Resistor Capacitor (C
CM1409. LCD and Camera EMI Filter Array with ESD Protection
LCD and Camera EMI Filter Array with ESD Protection Product Description The CM1409 is a family of pi style EMI filter arrays with ESD protection, which integrates either six or eight filters (C R C) in
FE1.1S USB 2.0 HIGH SPEED 4-PORT HUB CONTROLLER
USB 2.0 4-Port Hub FE1.1S USB 2.0 HIGH SPEED 4-PORT HUB CONTROLLER Data Sheet INTRODUCTION The FE1.1s is a highly integrated, high quality, high performance, low power consumption, yet low cost solution
CM1293A-04SO. 4-Channel Low Capacitance ESD Protection Array
CM1293A-04SO 4-Channel Low Capacitance ESD Protection Array Product Description CM1293A 04SO has been designed to provide ESD protection for electronic components or subsystems requiring minimal capacitive
BATSEL KEY3 KEY2 HOSCO GPIO0 DCDIS HOSCI KEY0 D4 KEY1 D3. Reset Default. 2 D7 BI / L Bit7 of ext. memory data bus
3. Pin Description 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 NGND LXVCC KEY4 GPIO1 CE2# GPIO2 CE1# VDD KEY5 KEY6 LED0 LED1 LED2 NC NC VCC LXVDD BAT
SRAM SRAM SRAM SCLK khz
MOTOROLA nc. SEMICONDUCTOR PRODUCT INFORMATION Advance Information Evaluation Module Order this document by: P/D The DSP56603 Evaluation Module () is designed as a low-cost platform for developing real-time
HT1628 RAM Mapping LCD Driver
RAM Mapping 116 2 LCD Driver Features Logic voltage 2.4V~5.5V LCD operating voltage (VLCD) 2.4V~5.5V LCD display 2 commons, 116 segments Support a maximum of 58 4 bit Display RAM Duty Static, 1/2; Bias
AUR9801D. Pin Assignments. Description. Applications. Features LI-ION/LI POLYMER BATTERY CHARGER AUR9801D
LI-ION/LI POLYMER BATTERY CHARGER Description Pin Assignments The is a highly-integrated battery charger for single-cell Li-ion or Li-polymer batteries capable of operating with an input voltage reached
PCIe 3.0 Clock Generator with 4 HCSL Outputs. Description OE VDDXD S0 S1 S2 X1 X2 PD OE GNDXD IREF CLK0 CLK0 CLK1 CLK1 CLK2 CLK2 CLK3 CLK3
PCIe 3.0 Clock Generator with 4 HCSL Outputs Features PCIe 3.0 complaint PCIe 3.0 Phase jitter: 0.48ps RMS (High Freq. Typ.) LVDS compatible outputs Supply voltage of 3.3V ±5% 25MHz crystal or clock input
SRAM SRAM SRAM. Data Bus EXTAL ESSI KHz MHz. In Headphone CS MHz. Figure 1 DSP56302EVM Functional Block Diagram
MOTOROLA SEMICONDUCTOR PRODUCT INFORMATION Advance Information Evaluation Module Order this document by: P/D The Evaluation Module () is designed as a low-cost platform for developing real-time software
Prepared by: Gang Chen ON Semiconductor U1 NCP1529 GND SW 5. Figure 1. Typical Simulation Circuit of NCP1529 for DC DC Applications
AND94/D Use of NCP1529 Pspice Model Prepared by: Gang Chen ON Semiconductor APPLICATION NOTE Overview The NCP1529 is a synchronous step down DC DC converter for portable applications powered by one cell
HT1621. RAM Mapping 32 4 LCD Controller for I/O µc. Features. General Description. Selection Table
RAM Mapping 32 4 LCD Controller for I/O µc Features Operating voltage : 2.4V~5.2V Built-in 256kHz RC oscillator External 32.768kHz crystal or 256kHz frequency source input Selection of 1/2 or 1/3 bias,
NB2304A. 3.3V Zero Delay Clock Buffer
3.3V Zero Delay Clock Buffer The NB304A is a versatile, 3.3 V zero delay buffer designed to distribute high speed clocks in PC, workstation, datacom, telecom and other high performance applications. It
EMI2180 Common Mode Filter with ESD Protection
Common Mode Filter with ESD Protection Functional Description The EMI280 is an industry first Common Mode Filter tuned to MHL speed (CMF) with integrated ESD protection. Differential signaling I/Os can
Headset/Speaker EMI Filter with ESD Protection CM1416/D. Features. Product Description. Applications. ±30kV ESD protection on each channel per
Headset/Speaker EMI Filter with ESD Protection CM1416 Features Functionally and pin compatible with the CSPEMI201A and CM1411 OptiGuard coated for improved reliability at assembly Two channels of EMI filtering
SPECIFICATION MX8732A USB/PS2 Single Chip Optical Mouse Sensor VERSION 1.2
SPECIFICATION MX8732A USB/PS2 Single Chip Optical Mouse Sensor VERSION 1.2 Sigma reserves the right to change this documentation without prior notice TABLE OF CONTENTS 1. General Description... 3 2. Features...
Genesys Logic, Inc. GL823. USB 2.0 SD/MMC Card Reader Controller. Datasheet
Genesys Logic, Inc. GL823 USB 2.0 SD/MMC Card Reader Controller Datasheet Revision 1.03 Jun. 28, 2010 Copyright Copyright 2010 Genesys Logic, Inc. All rights reserved. No part of the materials shall be
AF / 12. General Description. Features. Applications. Package. Pin. Configurations AF-V1.0. Analog Future
16-channel constant current LED driver chip General Description The 5024 is a constant current driver chip which is designed for LED lighting and LED screen. The size of the drive urrent can be adjusted
Low Pressure Digital & Analog Sensor
Low Pressure Digital & Analog Sensor SM6291, SM6391, SM6491 Gauge and Differential Pressure Sensor FEATURES Pressure range from 0.3 to 0.79 psi; gauge, differential or asymmetric differential outputs Digital
ET100/NRZ. Ethernet WAN Bridge. 10/100Base-TX Ethernet over NRZ
ET100/NRZ Ethernet WAN Bridge 10/100Base-TX Ethernet over NRZ CTC Union Technologies Co., Ltd. NeiHu Hi-Tech Park 8F, No. 60 Zhouzi Street. Neihu, Taipei, 114 Taiwan ET100/NRZ Ethernet WAN Bridge, User
E P AP3615. Pin Assignments. Description. Features. Applications 5 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER AP3615
AGND PGND VIN EN VOUT1 NC VOUT2 D1 5 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER Description The is a step-up DC-DC converter based on 1x/1.5x charge pump and low dropout current sink, which helps
PL1167. Low Power High Performance Single Chip 2.4GHz Transceiver. Product Description: Key Features: Applications: Pin Configuration:
Low Power High Performance Single Chip 2.4GHz Transceiver Product Description: is a piece of true low power high performance single chip 2.4GHz transceiver, which is designed for operation in the world
Using the Asynchronous DMA features of the Kinetis L Series
Freescale Semiconductor Document Number:AN4631 Application Note Rev. 0, 12/2012 Using the Asynchronous DMA features of the Kinetis L Series by: Chris Brown 1 Introduction The power consumption of devices
UniFinger SFM5060-OH
Ver. 1.0 Revision History Rev No. Issued date Description 1.0 Feb. 8, 2012 Initial Release Important Notice Information in this document is provided in connection with Suprema products. No license, express
Interfacing MC33903/4/5 With MC9S08DZ60
Freescale Semiconductor Document Number:AN4554 Application Note Rev. 0, 7/2012 Interfacing MC33903/4/5 With MC9S08DZ60 by: Nitin Gupta Automotive and Industrial Solutions Group 1 Introduction System Basis
LA6584M. Overview. Functions and Applications. Specitications. Monolithic Linear IC BTL Driver Single-Phase Full-Wave Fan Motor Driver
Ordering number : ENN8349 LA6584M Monolithic Linear IC BTL Driver Single-Phase Full-Wave Fan Motor Driver http://onsemi.com Overview The LA6584M is Single-phase bipolar fan motor is put into silent driving
ZXTR21XXEV1 USER GUIDE
ZXTR1XXEV1 USER GUIDE Description The board is intended for the evaluation of ZXTR1XXF series high voltage 0V linear regulators with fixed 5V, 8V and 1V output voltages in SOT3. Refer to table 1 for detailed
NMFAAAA. Product Preview USB Clamps, RS232 and General Purpose Data Line Filters with ESD Protection; Optional Internal Switch
Product Preview USB s, RS232 and General Purpose Data Line s with ; Optional Internal Switch USB line clamps (DOUT+, DOUT ) protect low operating voltage loads. Five additional low pass filters are built
HT42B534-x USB to UART Bridge IC
USB to UART Bridge IC Features Operating Voltage (): 3.3V~5.5V UART pin Voltage (IO): 1.8V~ (Less than voltage) Power down and wake-up functions to reduce power consumption Fully integrated 12MHz oscillator
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
1N5221B - 1N5263B Zener Diodes
1N5-1N5 Zener Diodes Tolerance = 5% 1N5-1N5 Zener Diodes DO-35 Glass case COLOR BAND DENOTES CATHODE Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The
NUP4114UCW1T2G. Transient Voltage Suppressors. ESD Protection Diodes with Low Clamping Voltage
Transient Voltage Suppressors ESD Protection Diodes with Low Clamping Voltage The NUP4114UCW1 transient voltage suppressor is designed to protect high speed data lines from ESD. Ultra low capacitance and
CCD VIDEO PROCESSING CHAIN LPF OP AMP. ADS-93x 16 BIT A/D SAMPLE CLAMP TIMING GENERATOR ALTERA 7000S ISP PLD UNIT INT CLOCK MASTER CLOCK
ADS-93X Timing Generator Board User's Manual Timing Generator Board Description This Timing Generator Board is designed to be part of a two board set, used in conjunction with an ON Semiconductor CCD Imager
TTP226. Preliminary 8 KEYS TOUCH PAD DETECTOR IC GENERAL DESCRIPTION
8 KEYS TOUCH PAD DETECTOR IC GENERAL DESCRIPTION The TTP222 is a touch pad detector IC which offers 8 touch keys. The touching detection IC is designed for replacing traditional direct button key with
CY3685 EZ-USB NX2LP Development Kit User s Guide Rev 1.2
CY EZ-USB NXLP Development Kit User s Guide Rev. Cypress Semiconductor Personal Communication Division 0 North First Street San Jose, CA (0) -00 www.cypress.com Cypress Disclaimer Agreement The information
SQFlash Industrial SD Card SQFlash Technical Manual
SQFlash Technical Manual REV 0.2 Page 1 of 15 Jul. 9, 2010 CONTENTS 1. Overview... 4 2. Standard Features... 5 3. Additional Features... 6 4. Pin Assignment and Block Diagram... 7 5. Power Consumption...
SN32F100 Series QUICK START. SN32F100 Series SN32F107 SN32F108 SN32F109. SONiX TECHNOLOGY CO., LTD Page 1 Version 3.1
SN32F100 Series QUICK START SN32F107 SN32F108 SN32F109 SONiX SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does
CM1461. Praetorian C-L-C LCD and Camera EMI Filter Array with ESD Protection
Praetorian C-L-C LCD and Camera EMI Filter Array with ESD Protection Product Description The CM1461 is a family of pi style EMI filter arrays with ESD protection, which integrates four, six and eight filters
2Mb Ultra-Low Power Asynchronous CMOS SRAM. Features. Power Supply (Vcc)
2Mb Ultra-Low Power Asynchronous CMOS SRAM 128Kx16 bit Features Overview The is an integrated memory device containing a 2 Mbit Static Random Access Memory organized as 131,072 words by 16 bits. The device
FT5x26. True Multi-Touch Capacitive Touch Panel Controller INTRODUCTION FEATURES
FT5x26 True Multi-Touch Capacitive Touch Panel Controller INTRODUCTION The FT5X26 is single-chip capacitive touch panel controllers with built-in enhanced Micro-controller unit (MCU). Itprovides the benefits
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
nc. Factors which affect reset are: 1. External components attached to the RESET pin 2. Low-voltage reset (LVR) on chip 3. Power-on reset (POR) detect
nc. Order this document by /D Motorola Semiconductor Resetting MCUs By Ross Mitchell MCU Applications Motorola Ltd. East Kilbride, Scotland Introduction A simple function such as reset can cause many problems
Varactor Diode Monolithic dual Varactor Diode for FM Tunin 14V, 50nA, CR=2.3, Q=150, MCPH3
Ordering number : EN680A SVC Varactor Diode Monolithic dual Varactor Diode for FM Tunin 14V, 0nA, CR=., Q=10, MCPH http://onsemi.com Features Twin type varactor diode with good large-signal characteristics
LY68L M Bits Serial Pseudo-SRAM with SPI and QPI
REVISION HISTORY Revision Description Issue Date Rev. 0.1 Initial Issued May.6. 2016 Rev. 0.2 Revised typos May.19. 2016 Revised the address bit length from 32 bits to 24 bits Oct.13. 2016 0 FEATURES GENERAL
AND8319/D. How to Maintain USB Signal Integrity when Adding ESD Protection APPLICATION NOTE
How to Maintain USB Signal Integrity when Adding ESD Protection Prepared by: Edwin Romero APPLICATION NOTE Introduction The Universal Serial Bus (USB) has become a popular feature of PCs, cell phones and
Product Data Sheet. Doc# : D-FT ( Version : 1.0 ) DDCN# : FocalTech Systems Co., Ltd Page : 2 of 22
Date: 21-Jan-10 FT5202 Capacitive Touch Panel controller FocalTech Systems Co., Ltd support@focaltech-systems.com THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO FOCALTECH SYSTEMS CO.,LTD., AND MAY NOT
AC/DC. Adapter. Ribbon. Cable Serial. Serial. Adapter. Figure 1. Hardware Setup using an EC2 Serial Adapter
C8051F32X DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The C8051F32x Development Kit contains the following items: C8051F320 Target Board C8051Fxxx Development Kit Quick-Start Guide C8051F32x Development
FT5x46. True Multi-Touch Capacitive Touch Panel Controller INTRODUCTION FEATURES
FT5x46 True Multi-Touch Capacitive Touch Panel Controller INTRODUCTION The FT5X46 is single-chip capacitive touch panel controllers with built-in enhanced Micro-controller unit (MCU).It provides the benefits