NOVPEK NetLeap User Guide

Size: px
Start display at page:

Download "NOVPEK NetLeap User Guide"

Transcription

1 NOVPEK NetLeap User Guide Document Number: Rev /2017 Property of NovTech, Inc All Rights Reserved

2 Contact Information: Home Page: Company: Modules: USA/Europe or Locations Not Listed: 7401 Wiles Road, Suite 229 Coral Springs, FL United States +1-(954) Information in this document is provided solely to enable system and software implementers to use NovTech products. There are no express or implied copyright licenses granted hereunder to design or fabricate any circuits or circuits based on the information in this document. NovTech reserves the right to make changes without further notice to any products herein. NovTech makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does NovTech assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters that may be provided in NovTech data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typical, must be validated for each customer application by customer s technical experts. NovTech does not convey any license under its patent rights nor the rights of others. NovTech products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the NovTech product could create a situation where personal injury or death may occur. Should Buyer purchase or use NovTech products for any such unintended or unauthorized application, Buyer shall indemnify and hold NovTech and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that NovTech was negligent regarding the design or manufacture of the part. Learn More: For more information about NovTech products, please visit NovTech and the NovTech logo are trademarks of NovTech, Inc. All other product or service names are the property of their respective owners. NovTech, Inc All rights reserved. Property of NovTech, Inc All Rights Reserved Page 1 of 13

3 Revision History Revision Date Changes Notes Number /2017 Initial Release Table 1- Provides a revision history for this user guide. Property of NovTech, Inc All Rights Reserved Page 2 of 13

4 1 Registering NOVPEK NetLeap Please register your NOVPEK NetLeap (NetLeap ) at Provide your contact information, select NOVPEK NetLeap from the version drop down box and fill the serial number. (Picture # 2 points to the serial number label) Figure 1 - Registering the NetLeap Property of NovTech, Inc All Rights Reserved Page 3 of 13

5 2 Download support files Support files can be downloaded from: This location contains documents, schematics, FPGA design files, installable tools and a Virtual Machine pre-configured with NetLeap LINUX BSP to speed application development. Copy the above link to a web browser, you will get the following screen: Figure 2 - Login to NovTech server, step 1 Enter the requested information and click Continue. The second step of obtaining access to NovTech server will be to choose a password. Property of NovTech, Inc All Rights Reserved Page 4 of 13

6 Figure 3 - Login to NovTech server, step 2 Once you are granted access you will be able to browse through the folders. Property of NovTech, Inc All Rights Reserved Page 5 of 13

7 Figure 4 - NetLeap folders in NovTech server Property of NovTech, Inc All Rights Reserved Page 6 of 13

8 3 NetLeap overview Figure 5 NetLeap Top Property of NovTech, Inc All Rights Reserved Page 7 of 13

9 Figure 6 NetLeap bottom Property of NovTech, Inc All Rights Reserved Page 8 of 13

10 4 Serial Port Connections The supplied USB to TTL UART cable connects to the NetLeap as follows: Figure 7 - Connecting supplied cable While this cable works well within the provided LINUX VM, the cable may not work properly under Windows 10 without obtaining a third party driver. You may search the web for drivers based on the USB ID. For Windows 10 NovTech recommends a FTDI TTL-232R-3V3 cable (not provided). It should be connected per the following: Figure 8 - TTL-232L-3V3 Connection Property of NovTech, Inc All Rights Reserved Page 9 of 13

11 5 Booting NetLeap 5.1 Hardware Setup To setup the NetLeap board for booting, follow these steps: 1. Plug in the supplied USB to TTL UART cable to the HPS UART port on the board (see figure 7) and connect to PC. 2. Run the supplied LINUX VM (see the NetLeap development manual for instructions) 3. Insert the SD card into the HPS SD slot. 5.2 Serial Console Setup Open a Serial Terminal like Hyper-Terminal, PuTTY or UConn, with settings of , 8, N, 1. For convenience, PuTTY and a preconfigured settings file are provided in the supplied Virtual Machine. The VM provides a preinstalled environment with tools to speed development. A link to PuTTY can be found on the desktop Figure 9 - PuTTY icon Property of NovTech, Inc All Rights Reserved Page 10 of 13

12 For convenience, a preconfigured setting called USB to TTL UART is also provided in the Virtual Machine. Figure 10 - Configuring Putty Property of NovTech, Inc All Rights Reserved Page 11 of 13

13 5.3 Power the board Using the provided power adaptor apply +5V to the board. Monitoring the serial terminal, you can stop at uboot or boot all the way to the Linux prompt. The login is root Figure 11 - Initial Boot of NetLeap Property of NovTech, Inc All Rights Reserved Page 12 of 13

NovTech User Guide Chameleon96

NovTech User Guide Chameleon96 NovTech User Guide Chameleon96 Document Name: User Guide Document Number: 001-127-04-05-01 Rev. 1.1 10/2017 Property of NovTech, Inc. 2017. All Rights Reserved Contact Information: Home Page: Company:

More information

for ColdFire Architectures V7.2 Quick Start

for ColdFire Architectures V7.2 Quick Start for ColdFire Architectures V7.2 Quick Start CodeWarrior Development Studio for ColdFire Architectures V7.2 Quick Start SYSTEM REQUIREMENTS Hardware Operating System Disk Space 1 GHz Pentium compatible

More information

2005: 0.5 PQ-MDS-PCIEXP

2005: 0.5 PQ-MDS-PCIEXP HW Getting Started Guide PQ-MDS-PCIEXP Adaptor December 2005: Rev 0.5 PQ-MDS-PCIEXP Adaptor HW Getting Started Guide Step 1:Check HW kit contents 1.PQ-MDS-PCIEXP Adaptor 2.PIB (Platform I/O Board) to PCIEXP

More information

Installing Service Pack Updater Archive for CodeWarrior Tools (Windows and Linux) Quick Start

Installing Service Pack Updater Archive for CodeWarrior Tools (Windows and Linux) Quick Start Installing Service Pack Updater Archive for CodeWarrior Tools (Windows and Linux) Quick Start SYSTEM REQUIREMENTS Hardware Operating System Disk Space Windows OS: PC with 1 GHz Intel Pentium compatible

More information

for StarCore DSP Architectures Quick Start for the Windows Edition

for StarCore DSP Architectures Quick Start for the Windows Edition for StarCore DSP Architectures Quick Start for the Windows Edition CodeWarrior Development Studio for StarCore DSP Architectures Quick Start for the Windows Edition SYSTEM REQUIREMENTS Hardware Operating

More information

Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME)

Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME) Freescale Semiconductor User s Guide Document Number: KTUSBSPIPRGUG Rev. 1.0, 7/2010 Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME) Figure 1. KITUSBSPIEVME and KITUSBSPIDGLEVME

More information

Upgrade the Solution With No Changes 2 Upgrade the Solution With No Changes If a Codebase does not contain updates to its properties, it is possible t

Upgrade the Solution With No Changes 2 Upgrade the Solution With No Changes If a Codebase does not contain updates to its properties, it is possible t Freescale Semiconductor Application Note Document Number: AN3819 Rev. 0.0, 02/2009 Methods for Upgrading Freescale BeeStack Codebases 1 Introduction This note describes how to upgrade an existing Freescale

More information

Controller Continuum. for Microcontrollers V6.3. Quick Start

Controller Continuum. for Microcontrollers V6.3. Quick Start Controller Continuum for Microcontrollers V6.3 Quick Start CodeWarrior Development Studio for Microcontrollers V6.x Quick Start SYSTEM REQUIREMENTS Hardware Operating System Disk Space PC with 1 GHz Intel

More information

SDR API Linux Installation

SDR API Linux Installation Mirics Limited. Applications Revision History Revision Release Date: Reason for Change: Originator 1.0 15 th May 2014 Pre-Release 0.0.1 APC 1.1 3 rd August 2014 Update for 1.1 build APC 1.2 28 th May 2015

More information

Software Defined Radio API Release Notes

Software Defined Radio API Release Notes Software Defined Radio API Release Notes SDRplay Limited. Software Defined Radio API Release Notes Applications Revision History Revision Release Date: Reason for Change: Originator 1.0 03/Jun/2013 First

More information

Component Development Environment Installation Guide

Component Development Environment Installation Guide Freescale Semiconductor Document Number: PEXCDEINSTALLUG Rev. 1, 03/2012 Component Development Environment Installation Guide 1. Introduction The Component Development Environment (CDE) is available as

More information

Electrode Graphing Tool IIC Driver Errata Microcontroller Division

Electrode Graphing Tool IIC Driver Errata Microcontroller Division Freescale Semiconductor User Guide Addendum TSSEGTUGAD Rev. 1, 03/2010 Electrode Graphing Tool IIC Driver Errata by: Microcontroller Division This errata document describes corrections to the Electrode

More information

CodeWarrior Development Tools mwclearcase Plug-in User s Guide

CodeWarrior Development Tools mwclearcase Plug-in User s Guide CodeWarrior Development Tools mwclearcase Plug-in User s Guide Revised: 29 January 2008 Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc. CodeWarrior is a trademark or registered

More information

Design Recommendations to Implement Compatibility Between the MC13783VK and the MC13783VK5

Design Recommendations to Implement Compatibility Between the MC13783VK and the MC13783VK5 Freescale Semiconductor Application Note Document Number: AN3417 Rev. 0.1, 01/2010 Design Recommendations to Implement Compatibility Between the MC13783VK and the MC13783VK5 by: Power Management and Audio

More information

for Freescale MPC55xx/MPC56xx Microcontrollers V2.10 Quick Start

for Freescale MPC55xx/MPC56xx Microcontrollers V2.10 Quick Start for Freescale MPC55xx/MPC56xx Microcontrollers V2.10 Quick Start CodeWarrior Development Studio for MPC55xx/MPC56xx Microcontrollers, version 2.xx Quick Start SYSTEM REQUIREMENTS Hardware Operating System

More information

Device Errata MPC860ADS Application Development System Board Versions ENG, PILOT, REV A

Device Errata MPC860ADS Application Development System Board Versions ENG, PILOT, REV A nc. Microprocessor and Memory Technologies Group Errata Number: E2 Device Errata MPC860ADS Application Development System Board Versions ENG, PILOT, REV A February 5, 1997 1. Failures bursting to EDO DRAM.

More information

CodeWarrior Development Studio for Freescale 68HC12/HCS12/HCS12X/XGATE Microcontrollers Quick Start SYSTEM REQUIREMENTS Hardware Operating System 200

CodeWarrior Development Studio for Freescale 68HC12/HCS12/HCS12X/XGATE Microcontrollers Quick Start SYSTEM REQUIREMENTS Hardware Operating System 200 CodeWarrior Development Studio for Freescale 68HC12/HCS12/HCS12X/XGATE Microcontrollers Quick Start SYSTEM REQUIREMENTS Hardware Operating System 200 MHz Pentium II processor or AMD-K6 class processor,

More information

Using the Project Board LCD Display at 3.3 volts

Using the Project Board LCD Display at 3.3 volts Freescale Semiconductor SLK0100AN Application Note Rev. 0, 1/2007 By: John McLellan Applications Engineering Austin, TX 1 Introduction This document guides you through the steps necessary to use the LCD

More information

PCB Layout Guidelines for the MC1321x

PCB Layout Guidelines for the MC1321x Freescale Semiconductor Application Note Document Number: AN3149 Rev. 0.0, 03/2006 PCB Layout Guidelines for the MC1321x 1 Introduction This application note describes Printed Circuit Board (PCB) footprint

More information

MPC8349E-mITX-GP Board Errata

MPC8349E-mITX-GP Board Errata Freescale Semiconductor Document Number: MPC8349EMITX-GPBE Rev. 2, 01/2007 MPC8349E-mITX-GP Board Errata This document describes the known errata and limitations of the MPC8349E-mITX-GP reference platform.

More information

USB Bootloader GUI User s Guide

USB Bootloader GUI User s Guide Freescale Semiconductor User s Guide Document Number: MC9S08JS16UG Rev. 0, 10/2008 USB Bootloader GUI User s Guide by: Derek Liu Applications Engineering China 1 Overview The MC9S08JS16 (JS16) supports

More information

CodeWarrior Development Studio for StarCore DSP SC3900FP Architectures Quick Start for the Windows Edition

CodeWarrior Development Studio for StarCore DSP SC3900FP Architectures Quick Start for the Windows Edition CodeWarrior Development Studio for StarCore DSP SC3900FP Architectures Quick Start for the Windows Edition SYSTEM REQUIREMENTS Hardware Operating System Disk Space Intel Pentium 4 processor, 2 GHz or faster,

More information

CodeWarrior Development Studio

CodeWarrior Development Studio CodeWarrior Development Studio for StarCore and SDMA Architectures Quick Start for Windows Operating Systems and Embedded Cross Trigger This Quick Start explains how to set up a sample project to use the

More information

MC56F825x/MC56F824x (2M53V) Chip Errata

MC56F825x/MC56F824x (2M53V) Chip Errata Freescale Semiconductor MC56F825XE_2M53V Chip Errata Rev. 1, 05/2012 MC56F825x/MC56F824x (2M53V) Chip Errata The following errata items apply to devices of the maskset 2M53V. 2012 Freescale Semiconductor,

More information

MPC5200(b) ATA MDMA, UDMA Functionality BestComm Setup Recommendations

MPC5200(b) ATA MDMA, UDMA Functionality BestComm Setup Recommendations Freescale Semiconductor Engineering Bulletin Document Number: EB711 Rev. 0, 05/2009 MPC5200(b) ATA MDMA, UDMA Functionality BestComm Setup Recommendations by: Peter Kardos Application Engineer, Roznov

More information

MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series

MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series Freescale Semiconductor Technical Data Document Number: MPC7410ECS08AD Rev. 1, 11/2010 MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnLE Series This document describes

More information

Utilizing Extra FC Credits for PCI Express Inbound Posted Memory Write Transactions in PowerQUICC III Devices

Utilizing Extra FC Credits for PCI Express Inbound Posted Memory Write Transactions in PowerQUICC III Devices Freescale Semiconductor Application Note Document Number: AN3781 Rev. 0, 06/2009 Utilizing Extra FC Credits for PCI Express Inbound Posted Memory Write Transactions in PowerQUICC III Devices This application

More information

ColdFire Convert 1.0 Users Manual by: Ernest Holloway

ColdFire Convert 1.0 Users Manual by: Ernest Holloway Freescale Semiconductor CFCONVERTUG Users Guide Rev.0, 09/2006 ColdFire Convert 1.0 Users Manual by: Ernest Holloway The ColdFire Convert 1.0 (CF) is a free engineering tool developed to generate data

More information

PQ-MDS-QOC3 Module. HW Getting Started Guide. Contents. About This Document. Required Reading. Definitions, Acronyms, and Abbreviations

PQ-MDS-QOC3 Module. HW Getting Started Guide. Contents. About This Document. Required Reading. Definitions, Acronyms, and Abbreviations HW Getting Started Guide PQ-MDS-QOC3 Module July 2006: Rev. A Contents Contents........................................................................................ 1 About This Document..............................................................................

More information

MTIM Driver for the MC9S08GW64

MTIM Driver for the MC9S08GW64 Freescale Semiconductor Application Note Document Number: AN4160 Rev. 0, 8/2010 MTIM Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group India IDC MSG NOIDA 1 Introduction

More information

SGTL5000 I 2 S DSP Mode

SGTL5000 I 2 S DSP Mode Freescale Semiconductor Application Note Document Number: AN3664 Rev. 2, 11/2008 SGTL5000 I 2 S DSP Mode by Name of Group Freescale Semiconductor, Inc. Austin, TX 1 Description SGTL5000 supports multiple

More information

MC33696MODxxx Kit. 1 Overview. Freescale Semiconductor Quick Start Guide. Document Number: MC33696MODUG Rev. 0, 05/2007

MC33696MODxxx Kit. 1 Overview. Freescale Semiconductor Quick Start Guide. Document Number: MC33696MODUG Rev. 0, 05/2007 Freescale Semiconductor Quick Start Guide Document Number: MC33696MODUG Rev. 0, 05/2007 MC33696MODxxx Kit by: Laurent Gauthier Toulouse, France 1 Overview This document provides introductory information

More information

Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages

Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages Freescale Semiconductor Engineering Bulletin EB360 Rev. 1, 10/2005 Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages This document describes the differences between the 196-pin

More information

CodeWarrior Kernel-Aware Debug API

CodeWarrior Kernel-Aware Debug API CodeWarrior Kernel-Aware Debug API Revised: 17 October 2006 Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc. CodeWarrior is a trademark or registered trademark of Freescale

More information

VortiQa Enterprise Quick Start Guide

VortiQa Enterprise Quick Start Guide Freescale Semiconductor Document Number: VQSEQSG Quick Start Guide Rev. 0, 06/2009 VortiQa Enterprise Quick Start Guide 1 Introduction This document describes how to set up and install the VortiQa software

More information

PQ-MDS-PIB. HW Getting Started Guide 12,13. January 2006: Rev Check kit contents

PQ-MDS-PIB. HW Getting Started Guide 12,13. January 2006: Rev Check kit contents HW Getting Started Guide PQ-MDS-PIB January 2006: Rev. 0.4 Step 1: Check kit contents 1. PQ- MDS- PIB (Platform I/O Board, or PIB ) 2. Power cable extension with on-off switch 3. 25 Pin IEEE 1284 Parallel

More information

M68CPA08QF Programming Adapter. User s Manual. Freescale Semiconductor, I. User s Manual. M68CPA08QF324448UM/D Version 1.

M68CPA08QF Programming Adapter. User s Manual. Freescale Semiconductor, I. User s Manual. M68CPA08QF324448UM/D Version 1. nc. User s Manual M68CPA08QF324448UM/D Version 1.0 June 24, 2003 M68CPA08QF324448 Programming Adapter User s Manual Motorola, Inc., 2003 nc. Important Notice to Users While every effort has been made to

More information

CodeWarrior Development Studio for Power Architecture Processors Version 10.x Quick Start

CodeWarrior Development Studio for Power Architecture Processors Version 10.x Quick Start CodeWarrior Development Studio for Power Architecture Processors Version 10.x Quick Start SYSTEM REQUIREMENTS Hardware Operating System Intel Pentium 4 processor, 2 GHz or faster, Intel Xeon, Intel Core,

More information

Model-Based Design Toolbox

Model-Based Design Toolbox Model-Based Design Toolbox Quick-Start An Embedded Target for the S32K1xx Family of Processors Version 3.0.0 Target Based Automatic Code Generation Tools For MATLAB /Simulink /Stateflow Models working

More information

Apollo2 EVB Quick Start Guide

Apollo2 EVB Quick Start Guide Apollo2 EVB Quick Start Guide Doc ID: QS-A2-1p00 Revision 1.0 June 2017 QS-A2-1p00 Page 1 of 11 2017 Ambiq Micro, Inc. Table of Content 1. Introduction...3 2. Documentation Revision History...3 3. Overview

More information

Figure 1. Power Barrel Connector Requirements

Figure 1. Power Barrel Connector Requirements Freescale Semiconductor Quick Start Guide Rev. 0.1, 06/29/2004 DEMO9S12NE64 Demo Quick Start Guide Introduction This kit and guide contains everything you need to get started. You will connect the board

More information

Programming and Evaluation Tool for Serial EEPROMs

Programming and Evaluation Tool for Serial EEPROMs EasyPro 3.2 Evaluation Board User's Manual EVAL BOARD USER S MANUAL Programming and Evaluation Tool for Serial EEPROMs What is EasyPRO? EasyPRO is an easy-to-use, software-driven device programmer that

More information

M68CPA08W1628T20. Programming Adapter. User s Manual. Freescale Semiconductor, I. User s Manual. M68CPA08W1628T20UM/D Version 1.

M68CPA08W1628T20. Programming Adapter. User s Manual. Freescale Semiconductor, I. User s Manual. M68CPA08W1628T20UM/D Version 1. nc. User s Manual M68CPA08W1628T20UM/D Version 1.1 January 12, 2004 M68CPA08W1628T20 Programming Adapter User s Manual Motorola, Inc., 2004 nc. Important Notice to Users While every effort has been made

More information

MPR121 Jitter and False Touch Detection

MPR121 Jitter and False Touch Detection Freescale Semiconductor Application Note Rev 1, 03/2010 MPR121 Jitter and False Touch Detection INTRODUCTION Touch acquisition takes a few different parts of the system in order to detect touch. The baseline

More information

Using the PowerQUICC II Auto-Load Feature

Using the PowerQUICC II Auto-Load Feature Freescale Semiconductor Application Note Document Number: AN3352 Rev. 0, 01/2007 Using the PowerQUICC II Auto-Load Feature by David Smith/Patrick Billings Field Application Engineering/DSD Applications

More information

PAS08QF80 User s Manual

PAS08QF80 User s Manual PAS08QF80 User s Manual HC(S)08 Programming Adapter PAS08QF80UM Revision 0., June 00 User s Manual PAS08QF80 HC(S)08 Programming Adapter PAS08QF80 Quick Start Guide The PAS08QF80 is a low-cost universal

More information

56F8300 BLDC Motor Control Application

56F8300 BLDC Motor Control Application 56F8300 BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document 56F8300 16-bit Digital Signal Controllers 8300BLDCQETD Rev. 2 08/2005 freescale.com Document

More information

Prepared by: Gang Chen ON Semiconductor U1 NCP1529 GND SW 5. Figure 1. Typical Simulation Circuit of NCP1529 for DC DC Applications

Prepared by: Gang Chen ON Semiconductor   U1 NCP1529 GND SW 5. Figure 1. Typical Simulation Circuit of NCP1529 for DC DC Applications AND94/D Use of NCP1529 Pspice Model Prepared by: Gang Chen ON Semiconductor APPLICATION NOTE Overview The NCP1529 is a synchronous step down DC DC converter for portable applications powered by one cell

More information

PAS08QF5264 User s Manual

PAS08QF5264 User s Manual PAS08QF6 User s Manual HC(S)08 Programming Adapter PAS08QF6UM Revision 0., June 00 User s Manual PAS08QF6 HC(S)08 Programming Adapter PAS08QF6 Quick Start Guide The PAS08QF6 is a low-cost universal programming

More information

Keil uvision 4 Kinetis Support for Freescale MQX RTOS Release Notes

Keil uvision 4 Kinetis Support for Freescale MQX RTOS Release Notes Keil uvision 4 Kinetis Support for Freescale MQX RTOS 3.7.0 Release Notes PRODUCT: Keil uvision 4 Kinetis Support for Freescale MQX RTOS 3.7.0 PRODUCT VERSION: 1.0 DESCRIPTION: Adding support for Keil

More information

Using the Multi-Axis g-select Evaluation Boards

Using the Multi-Axis g-select Evaluation Boards Freescale Semiconductor Application Note Rev 2, 10/2006 Using the Multi-Axis g-select Evaluation Boards by: Michelle Clifford and John Young Applications Engineers Tempe, AZ INTRODUCTION This application

More information

KIT33972AEWEVBE Evaluation Board

KIT33972AEWEVBE Evaluation Board Freescale Semiconductor, Inc. User s Guide Document Number: KT33972UG Rev. 1.0, 7/2013 KIT33972AEWEVBE Evaluation Board Featuring the MC33972A Multiple Switch Detection Interface IC Contents Figure 1.

More information

Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen

Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen Freescale Semiconductor Application Note AN3589 Rev. 0, 02/2008 Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen 1 Introduction This application note explains

More information

HC912D60A / HC912Dx128A 0.5µ Microcontrollers Mask sets 2K38K, 1L02H/2L02H/3L02H & K91D, 0L05H/1L05H/2L05H

HC912D60A / HC912Dx128A 0.5µ Microcontrollers Mask sets 2K38K, 1L02H/2L02H/3L02H & K91D, 0L05H/1L05H/2L05H Freescale Semiconductor Engineering Bulletin EB664 Rev. 6, 08/2006 HC912D60A / HC912Dx128A 0.5µ Microcontrollers Mask sets 2K38K, 1L02H/2L02H/3L02H & K91D, 0L05H/1L05H/2L05H by: Devaganesan Rajoo HC12

More information

Mask Set Errata. Introduction. MCU Device Mask Set Identification. MCU Device Date Codes. MCU Device Part Number Prefixes MSE08AZ32_0J66D 12/2002

Mask Set Errata. Introduction. MCU Device Mask Set Identification. MCU Device Date Codes. MCU Device Part Number Prefixes MSE08AZ32_0J66D 12/2002 Mask Set Errata MSE08AZ32_0J66D 12/2002 Mask Set Errata for MC68HC08AZ32, Mask 0J66D Introduction This mask set errata applies to this MC68HC08AZ32 MCU mask set: 0J66D MCU Device Mask Set Identification

More information

etpu General Function Set (Set 1) David Paterson MCD Applications Engineer

etpu General Function Set (Set 1) David Paterson MCD Applications Engineer Freescale Semiconductor Application Note Document Number: AN2863 Rev. 0, 12/2007 etpu General Function Set (Set 1) by David Paterson MCD Applications Engineer 1 Introduction This application note complements

More information

MPC8260 IDMA Timing Diagrams

MPC8260 IDMA Timing Diagrams Freescale Semiconductor Application Note Document Number: AN2177 Rev. 4, 07/2006 MPC8260 IDMA Timing Diagrams By DSD Applications, NCSG Freescale Semiconductor, Inc. The MPC8260 PowerQUICC II integrated

More information

MSC8144AMC-S Getting Started Guide

MSC8144AMC-S Getting Started Guide Freescale Semiconductor Hardware Getting Started Guide Document Number: MSC8144AMCSHWGSG Rev. 2, 07/2008 MSC8144AMC-S Getting Started Guide This document describes how to connect the MSC8144AMC-S card

More information

KIT34901EFEVB Evaluation Board

KIT34901EFEVB Evaluation Board Freescale Semiconductor, Inc. User s Guide Document Number: KT34901UG Rev. 1.0, 2/2014 KIT34901EFEVB Evaluation Board Featuring the MC34901 High Speed CAN Transceiver Contents Figure 1. KIT34901EFEVB Evaluation

More information

etpu Automotive Function Set (Set 2)

etpu Automotive Function Set (Set 2) Freescale Semiconductor Application Note Document Number: AN3768 Rev. 0, 05/2009 etpu Automotive Function Set (Set 2) by: Geoff Emerson East Kilbride U.K. 1 Introduction This application note complements

More information

CodeWarrior Development Studio for etpu v10.x Quick Start SYSTEM REQUIREMENTS

CodeWarrior Development Studio for etpu v10.x Quick Start SYSTEM REQUIREMENTS CodeWarrior Development Studio for etpu v10.x Quick Start SYSTEM REQUIREMENTS Hardware Operating System Software Disk Space Intel Pentium 4 processor, 2 GHz or faster, Intel Xeon, Intel Core, AMD Athlon

More information

IIC Driver for the MC9S08GW64

IIC Driver for the MC9S08GW64 Freescale Semiconductor Application Note Document Number: AN4158 Rev. 0, 8/2010 IIC Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group Noida India 1 Introduction This document

More information

16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller Solutions Group, Scotland

16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller Solutions Group, Scotland Freescale Semiconductor Users Guide Document Number: S12XHY256ACDUG Rev. 0, 10/2010 16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller

More information

Migrating from the MPC852T to the MPC875

Migrating from the MPC852T to the MPC875 Freescale Semiconductor Application Note Document Number: AN2584 Rev. 1, 1/2007 Migrating from the MPC852T to the MPC875 by Ned Reinhold NCSD Applications Freescale Semiconductor, Inc. Austin, TX This

More information

Non-Windows Work Flow

Non-Windows Work Flow Overview This document details the recommended flow for getting started with the RSPs on a non-windows environment. Note that different flavours of non-windows platforms may have specific issues or requirements.

More information

EchoRemote Evaluation Software for Windows

EchoRemote Evaluation Software for Windows Freescale Semiconductor Application Note Document Number: AN2953 Rev.1, 05/2007 EchoRemote Evaluation Software for Windows 1 Overview EchoRemote is a Microsoft Windows program that communicates with the

More information

M68HC705E24PGMR PROGRAMMER USER'S MANUAL

M68HC705E24PGMR PROGRAMMER USER'S MANUAL M68HC705E24PGMR/D Rev. 2 March 1995 M68HC705E24PGMR PROGRAMMER USER'S MANUAL Third Edition MOTOROLA Ltd., 1993, 1995; All Rights Reserved Motorola reserves the right to make changes without further notice

More information

PowerQUICC HDLC Support and Example Code

PowerQUICC HDLC Support and Example Code Freescale Semiconductor Application Note Document Number: AN3966 Rev. 0, 11/2009 PowerQUICC HDLC Support and Example Code High-level data link control (HDLC) is a bit-oriented protocol that falls within

More information

Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation

Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation Freescale Semiconductor Application Note AN3865 Rev. 1.0, 2/2010 Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation 1 Overview

More information

56F805. BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document. 56F bit Digital Signal Controllers

56F805. BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document. 56F bit Digital Signal Controllers 56F805 BLDC Motor Control Application with Quadrature Encoder using Processor Expert TM Targeting Document 56F800 6-bit Digital Signal Controllers 805BLDCQETD Rev. 08/2005 freescale.com BLDC Motor Control

More information

Functional Differences Between the DSP56307 and DSP56L307

Functional Differences Between the DSP56307 and DSP56L307 Freescale Semiconductor Engineering Bulletin EB361 Rev. 3, 10/2005 Functional Differences Between the DSP56307 and DSP56L307 The DSP56307 and DSP56L307, two members of the Freescale DSP56300 family of

More information

MCF54451, MCF54452, MCF54453, MCF54454,

MCF54451, MCF54452, MCF54453, MCF54454, Chip Errata MCF54455DE Rev. 5, 8/21 MCF54455 Chip Errata Revision: All Supports: MCF5445, MCF54451, MCF54452, MCF54453, MCF54454, and MCF54455 Summary of MCF5445x Errata The latest mask of the MCF5445x

More information

Use of PGA on MC56F800x Interaction of PDB, PGA and ADC

Use of PGA on MC56F800x Interaction of PDB, PGA and ADC Freescale Semiconductor Document Number: AN4334 Application Note Rev. 0, 03/2012 Use of PGA on MC56F800x Interaction of PDB, PGA and ADC by: William Jiang System and Application, Microcontroller Solutions

More information

Performance Factors nc. 2 Performance Factors The following sections discuss performance factors. 2.1 MPX vs. 60x Bus Mode One of the main factors tha

Performance Factors nc. 2 Performance Factors The following sections discuss performance factors. 2.1 MPX vs. 60x Bus Mode One of the main factors tha nc. White Paper MPC74XXBUSWP Rev. 1.1, 11/2003 Memory Bus Throughput of the MPC74xx Richie David, CPD Applications risc10@email.mot.com This document compares the memory bus data transfer rate of the MPC7450

More information

Converting Earlier Versions of CodeWarrior for StarCore DSPs Projects to Version

Converting Earlier Versions of CodeWarrior for StarCore DSPs Projects to Version Freescale Semiconductor Document Number: AN4253 Application Note Rev. 1, 01/2011 Converting Earlier Versions of CodeWarrior for StarCore DSPs Projects to Version 10.1.8 by DevTech Customer Engineering

More information

Using the CAU and mmcau in ColdFire, ColdFire+ and Kinetis

Using the CAU and mmcau in ColdFire, ColdFire+ and Kinetis Freescale Semiconductor Document Number: AN4307 Application Note Rev. Rev.0, 5/ 2011 Using the CAU and mmcau in ColdFire, ColdFire+ and Kinetis by: Paolo Alcantara RTAC Americas Mexico 1 Introduction This

More information

PDB Driver for the MC9S08GW64

PDB Driver for the MC9S08GW64 Freescale Semiconductor Application Note Document Number: AN4163 Rev. 0, 8/2010 PDB Driver for the MC9S08GW64 by: Tanya Malik Reference Design and Applications Group Noida India 1 Introduction This document

More information

Model Based Development Toolbox MagniV for S12ZVC Family of Processors

Model Based Development Toolbox MagniV for S12ZVC Family of Processors Freescale Semiconductor Release Notes Document Number: MBDTB-ZVC-RN Model Based Development Toolbox MagniV for S12ZVC Family of Processors Version 1.0.0 Freescale Semiconductor, Inc. 1. Revision History

More information

Using IIC to Read ADC Values on MC9S08QG8

Using IIC to Read ADC Values on MC9S08QG8 Freescale Semiconductor Application Note AN3048 Rev. 1.00, 11/2005 Using IIC to Read ADC Values on MC9S08QG8 by Donnie Garcia Application Engineering Microcontroller Division 1 Introduction The MC9S08QG8

More information

MPR121 Proximity Detection

MPR121 Proximity Detection Freescale Semiconductor Application Note Rev 0, 03/2010 MPR121 Proximity Detection INTRODUCTION MPR121 is a feature rich, second generation touch sensor controller after Freescale s initial release of

More information

i.mx31 PDK Power Measurement with GUI

i.mx31 PDK Power Measurement with GUI Freescale Semiconductor Application Note Document Number: AN4061 Rev. 0, 02/2010 i.mx31 PDK Power Measurement with GUI by Multimedia Application Division Freescale Semiconductor, Inc. Austin, TX This application

More information

Using DMA to Emulate ADC Flexible Scan Mode on Kinetis K Series

Using DMA to Emulate ADC Flexible Scan Mode on Kinetis K Series Freescale Semiconductor Document Number: AN4590 Application Note Rev 0, 9/2012 Using DMA to Emulate ADC Flexible Scan Mode on Kinetis K Series by: Lukas Vaculik Rožnov pod Radhoštem Czech Republic 1 Introduction

More information

Using an I 2 C EEPROM During MSC8157 Initialization

Using an I 2 C EEPROM During MSC8157 Initialization Freescale Semiconductor Application Note AN4205 Rev. 0, 11/2010 Using an I 2 C EEPROM During MSC8157 Initialization The MSC8157 family allows you to use an I 2 C EEPROM to to initialize the DSP during

More information

Figure 1. (Top) top view and (bottom) bottom view of the version 3 ON Semiconductor SMA boards, from left to right 6mm, 3mm and 1mm

Figure 1. (Top) top view and (bottom) bottom view of the version 3 ON Semiconductor SMA boards, from left to right 6mm, 3mm and 1mm Reference Designs for the SMA and SMTPA MLP-Packaged SiPM Evaluation Boards OVERVIEW This document gives the complete schematics for the SMA and SMTPA SiPM evaluation boards from ON Semiconductor. The

More information

Using the ColdFire+ Family Enhanced EEPROM Functionality Melissa Hunter Derrick Klotz

Using the ColdFire+ Family Enhanced EEPROM Functionality Melissa Hunter Derrick Klotz Freescale Semiconductor Application Note Document Number: AN4306 Rev. 0, 05/2011 Using the ColdFire+ Family Enhanced EEPROM Functionality by: Melissa Hunter Derrick Klotz 1 Introduction The ColdFire+ family

More information

M68HC705E6PGMR PROGRAMMER USER'S MANUAL

M68HC705E6PGMR PROGRAMMER USER'S MANUAL M68HC705E6PGMR/D2 nc. Oct 1993 M68HC705E6PGMR PROGRAMMER USER'S MANUAL Motorola reserves the right to make changes without further notice to any products herein to improve reliability, function or design.

More information

NovTech Evaluation Board NOVPEK CVLite

NovTech Evaluation Board NOVPEK CVLite NovTech Evaluation Board NOVPEK CVLite Document Name: User Manual Document Number: 001-120- Rev. 0.1 09/2014 Property of NovTech, Inc. 2014. All Rights Reserved Page 0 of 38 Contact Information: Home Page:

More information

Power Cycling Algorithm using the MMA73x0L 3-Axis Linear Accelerometer

Power Cycling Algorithm using the MMA73x0L 3-Axis Linear Accelerometer Freescale Semiconductor Application Note Rev 1, 06/2007 Power Cycling Algorithm using the MMA73x0L 3-Axis Linear Accelerometer by: Kimberly Tuck Accelerometer Systems and Applications Engineering Tempe,

More information

Using the Asynchronous DMA features of the Kinetis L Series

Using the Asynchronous DMA features of the Kinetis L Series Freescale Semiconductor Document Number:AN4631 Application Note Rev. 0, 12/2012 Using the Asynchronous DMA features of the Kinetis L Series by: Chris Brown 1 Introduction The power consumption of devices

More information

Using the Kinetis Family Enhanced EEPROM Functionality

Using the Kinetis Family Enhanced EEPROM Functionality Freescale Semiconductor Application Note Document Number: AN4282 Rev. 1, 03/2015 Using the Kinetis Family Enhanced EEPROM Functionality by: Melissa Hunter Derrick Klotz 1 Introduction Some of the Kinetis

More information

1N5221B - 1N5263B Zener Diodes

1N5221B - 1N5263B Zener Diodes 1N5-1N5 Zener Diodes Tolerance = 5% 1N5-1N5 Zener Diodes DO-35 Glass case COLOR BAND DENOTES CATHODE Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The

More information

Is Now Part of To learn more about ON Semiconductor, please visit our website at

Is Now Part of To learn more about ON Semiconductor, please visit our website at Is Now Part of To learn more about ON Semiconductor, please visit our website at ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor

More information

Differences Between the DSP56301, DSP56311, and DSP56321

Differences Between the DSP56301, DSP56311, and DSP56321 Freescale Semiconductor Engineering Bulletin Document Number: EB724 Rev. 0, 11/2009 Differences Between the DSP56301, DSP56311, and DSP56321 This engineering bulletin discusses the differences between

More information

AND8319/D. How to Maintain USB Signal Integrity when Adding ESD Protection APPLICATION NOTE

AND8319/D. How to Maintain USB Signal Integrity when Adding ESD Protection APPLICATION NOTE How to Maintain USB Signal Integrity when Adding ESD Protection Prepared by: Edwin Romero APPLICATION NOTE Introduction The Universal Serial Bus (USB) has become a popular feature of PCs, cell phones and

More information

MC33897 Single-Wire CAN Transceiver Reliability and Quality Documents

MC33897 Single-Wire CAN Transceiver Reliability and Quality Documents Freescale Semiconductor Reliability & Qualifications RQA33897 Rev. 2.0, 8/2006 MC33897 Single-Wire CAN Transceiver Reliability and Quality Documents The device(s) in this document successfully completed

More information

NCN9252MUGEVB. High-Speed USB 2.0 (480 Mbps) DP3T Switch for USB/UART/Data Multiplexing Evaluation Board User's Manual EVAL BOARD USER S MANUAL

NCN9252MUGEVB. High-Speed USB 2.0 (480 Mbps) DP3T Switch for USB/UART/Data Multiplexing Evaluation Board User's Manual EVAL BOARD USER S MANUAL High-Speed USB 2.0 (480 Mbps) DP3T Switch for USB/UART/Data Multiplexing Evaluation Board User's Manual EVAL BOARD USER S MANUAL OVERVIEW The NCN9252 is a DP3T switch for combined UART and USB 2.0 high

More information

Pad Configuration and GPIO Driver for MPC5500 Martin Kaspar, EMEAGTM, Roznov Daniel McKenna, MSG Applications, East Kilbride

Pad Configuration and GPIO Driver for MPC5500 Martin Kaspar, EMEAGTM, Roznov Daniel McKenna, MSG Applications, East Kilbride Freescale Semiconductor Application Note Document Number: AN2855 Rev. 0, 2/2008 Pad Configuration and GPIO Driver for MPC5500 by: Martin Kaspar, EMEAGTM, Roznov Daniel McKenna, MSG Applications, East Kilbride

More information

Quick Start Guide for TWR-S08MM128-KIT TOWER SYSTEM MC9S08MM128. The industry s most complete solution for portable medical applications

Quick Start Guide for TWR-S08MM128-KIT TOWER SYSTEM MC9S08MM128. The industry s most complete solution for portable medical applications Quick Start Guide for TWR-S08MM128-KIT TOWER SYSTEM MC9S08MM128 The industry s most complete solution for portable medical applications TOWER SYSTEM Get to Know the TWR-S08MM128-KIT BDM Interface for MC9S08MM128

More information

Clock Mode Selection for MSC8122 Mask Set K98M

Clock Mode Selection for MSC8122 Mask Set K98M Freescale Semiconductor Application Note AN2904 Rev. 0, 11/2004 Clock Mode Selection for MSC8122 Mask Set K98M By Donald Simon and Wes Ray This application note describes the MSC8122 clock modes for mask

More information

Symphony SoundBite: Quick Start with Symphony Studio. Installation and Configuration

Symphony SoundBite: Quick Start with Symphony Studio. Installation and Configuration Symphony SoundBite: Quick Start with Symphony Studio Installation and Configuration Document Number: DSPB56371UGQS Rev. 2 September 2008 How to Reach Us: Home Page: www.freescale.com E-mail: support@freescale.com

More information