POWER RELAY. JY Series. 1 POLE - 3, 5A Medium Load Control (AgNi contacts)
|
|
- Shanon Foster
- 5 years ago
- Views:
Transcription
1 POWER RELAY 1 POLE - 3, A Medium Load Control (AgNi contacts) JY Series FEATURES Small and good for high density mounting Mounting space mm, height 1.mm UL, CSA recognized High sensitivity and low power consumption power consumption 9mW, rated power consumption mw Wide operating range Plastic sealed type Socket mounting type and socket available Pin compatible with solid state relays type SJ Through hole Plastic materials: UL flammability 9V- RoHS compliant. Applications Sequencer, FA equipment etc. Part Numbers [Example] JY - 1 G - K P - UL (a) (b) (c) (d) (e) (f) (a) Relay type JY : JY series (b) Coil rated voltage 1 :...VDC (c) Contact rating / material / construction W G R HG HR (d) Enclosure K : Plastic sealed type (e) Terminal type Nil P (f) Safety approval Nil UL : 3A, gold overlay silver, bifurcated contact : 3A, gold flash silver, single contact : 3A, silver, single contact : A, gold flash silver, single contact : A, silver, single contact : PC board mounting type : Socket mounting type (without JY-W) : Without safety standard : UL, CSA recognized type Note: Actual marking omits the hyphen (-) and suffix P and UL 1
2 Specifications Item JY - ( ) W JY - ( ) G JY - ( ) R JY - ( ) HG JY - ( ) HR Contact data Configuration 1a (1 form A (SPST-NO) ) Construction Material Bifurcated (cross bar) Gold overlay silver JY Series 3A type A type Remarks / conditions Gold flash silver Silver Resistance Max. 3 mω Max. 1 mω Single Gold flash silver Max. 3 mω Silver Max. 1 mω Contact rating 3A, VAC / 3VDC A, VAC / 3VDC Max. carrying current Max. switching voltage A VAC / 1 VDC Max. switching power 7VA, 9W 1,VA, 1W Max. switching current 3A A (socket 3A) Min. switching load *.1mA 1 mvdc 1mA VDC 1mA VDC 1mA VDC 1mA VDC Coil Rated power consumption mw (V type: 3 mw) At ºC Timing data power consumption 1 mw (V type: 17 mw) At ºC Operating temperature range -ºC ~ +9ºC (V type: + C) Initial (at VDC, 1A) No frost Max. ms At nominal voltage (without diode, without bounce) Max. 3 ms At nominal voltage (without diode, without bounce) Life Mechanical Min. x 1 operations Insulation Electrical Min. 1 x 1 3 operations Contact rating Insulation resistance Min. 1,MΩ at VDC Initial Dielectric strength Open contacts Coil contact 7VAC, 1 minute,vac, 1 minute Other Surge strength Vibration resistance Shock resistance Coil to contacts Dimensions / weight Sealing Misoperation Endurance Misoperation Endurance,V (1. x µs standard wave) 1 to to 1Hz single amplitude.7 mm 1 to to 1Hz single amplitude.7 mm Min. 1m/s² (11 ± 1ms) Min. 1,m/s² ( ± 1ms) mm / approx. g Plastic sealed, RTIII * : Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
3 Coil Data Coil code Rated Coil Voltage (VDC) Coil Resistance +/-1% (Ω) Must Voltage * (VDC) Must Voltage * (VDC) , 1..9, JY Series Rated Power (mw), Note: All values in the table are valid for o C and zero contact current unless otherwise specified. Note: Care shall be taken on the heat generated on PC board when maximum carrying current exceeds 1A. Please perform the confirmation test with actual conditions * : Specified operated values are valid for pulse wave voltage. Safety Standards Type Compliance Contact Rating UL UL E1 CSA C. No. 1 LR 379 JY-( )HG-K, JY-( )HR-K A VAC / 3VDC resistive 1/HP, 1VAC / VAC Pilot duty C1, C3 JY-( )G-K, JY-( )R-K 3A VAC / 3VDC resistive 1/1HP, 1VAC / VAC Pilot duty D1 JY-( )W-K A VAC / 3VDC resistive 1/HP, 1VAC /VAC Pilot duty C3 Dimensions Dimensions (1.) (1.9) 7. Schematics (BOTTOM VIEW) COM NO
4 PC Board Mouting Hole Layout (BOTTOM VIEW) -φ (1.9) (1.) Tolerance of PC board mounting hole layout: ±.1 unless otherwise specified. ( ): Reference value Unit: mm Socket Dimensions (19.) 7... PC Board Mouting Hole Layout (BOTTOM VIEW) -φ (1.9) (1.) Tolerance of PC board mounting hole layout: ±.1 unless otherwise specified. ( ): Reference value Unit: mm Note: 1: Socket ordering code: JK-N : Standard IC socket is not recommended. Please use socket "JK-N"
5 Characteristic Data Time (ms) Timing Max. 3 Min. Max. 1 Min Coil Power (W) Temperature rise (degc) Coil Temperature Rise A 3A A Nominal Voltage Multiplying Factor Coil Power (W) Ambient Temperature (degc) Operating Range (. to VDC coil). to VDC coil A 3A A Must Voltage (Hot Coil) Must Voltage (Cool Coil) Operating Range (VDC coil) Maximum Switching Power Life Curves Nominal Voltage Multiplying Factor A 3A A Must Voltage (Hot Coil). 1 Ambient Temperature (degc) Must Voltage (Cool Coil) VDC coil Contact Current (A) A type DC Resistive A type DC Resistive Contact Operation (x1 ) DC3V, L/R=7ms AC1V, cosφ=. ACV, cosφ=. AC1V, Resistive DC3V, ACV Resistive A type Contact Current (A) Distribution of & Voltage Distribution of & Time Distribution of 1 JY-HG-K n= 1 JY-HG-K n= JY-HG-K n= Distribution (%) Distribution (%) Distribution (%) Nominal Voltage Multiplying Factor (%) 1 3 Time (ms) 7 1 1
6 Distribution (%) 1 Distribution of Mechanical Life Test Mechanical Life Test JY-W-K 1 n= JY-1W-K n=1 1 operations/min Contact Resitance JY-HG-K 1 n=1 1 operations/min. 1 1 Initial 1 1 Initial 1 1 Operation (X 1 ) Operation (X 1 ) Electrical Life Test Electrical Life Test Electrical Life Test 1 1 JY-G-K n=1 1 Operations/Min. ACV 3A (Resistive) 1 1 Initial Operations (x 1 ) 1 1 JY-G-K n=1 3 Operations/Min. DC3V 3A (Resistive) 1 1 Initial Operations (x 1 ) JY-HG-K n=1 1 Operations/Min. ACV A (Resistive) Initial Operations (x 1 ) JY-HG-K n=1 3 Operations/Min. DC3V 3A (Resistive) Electrical Life Test Initial Operations (x 1 ) Initial Electrical Life Test JY-1W-K n= 3 Operations/Min. ACV 3A (Resistive) 1 3 Operations (x 1 ) Initial Electrical Life Test JY-1W-K n= 3 Operations/Min. DC3V 3A (Resistive) 1 Operations (x 1 )
7 GENERAL INFORMATION 1. ROHS Compliance All relays produced by Fujitsu Components are compliant with RoHS directive 11//EU including amendments. Use of Cadmium in electrical contacts is exempted as per Annex III of the RoHS directive 1//EU. Please consider expiry date of exemption. Relays with Cadmium containing contacts are not to be used for new designs. All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: Lead free solder plating on relay terminals is Sn-3.Ag-.Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process.. Recommended Lead Free Solder Profile Recommended solder for assembly: Sn-3.Ag-.Cu. Solder by Soldering Iron: Soldering Iron 3-W Temperature: maximum 3-3 C Duration: maximum 3 sec. Flow Solder condition: Pre-heating: maximum 1 C within 9 sec. Soldering: dip within sec. at C ± C solder bath Relay must be cooled by air immediately after soldering We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. Tin Whiskers Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 7
8 Fujitsu Components International Headquarter Offices Japan FUJITSU COMPONENT LIMITED Shinagawa Seaside Park Tower 19F, 1-, Higashi-shinagawa -chome, Shinagawa-ku, Tokyo,1-, Japan Tel: (1-3) 3-1 Fax: (1-3) Web: North and South America FUJITSU COMPONENTS AMERICA, INC 9 North First Street, Suite 1 San Jose, CA 9131, USA Tel: (1-) 7-9 Fax: (1-) components@us.fujitsu.com Web: us.fujitsu.com/components Europe FUJITSU COMPONENTS EUROPE B.V. Diamantlaan 13 WV Hoofddorp Netherlands Tel: (31-3) 91 Fax: (31-3) 9 info@fceu.fujitsu.com Web: Asia Pacific FUJITSU COMPONENTS ASIA, LTD. 1E Pasir Panjang Road #1-1 Citilink Warehouse Complex Singapore 119 Tel: () 37- Fax: () fcal@sg.fujitsu.com Web: China FUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LTD. Unit 3, InterContinental Center 1 Yu Tong Road, Shanghai 7, China Tel: (-1) Fax: (-1) fcal@sg.fujitsu.com Web: Hong Kong FUJITSU COMPONENTS HONG KONG CO., LTD Unit, Inter-Continental Plaza No.9 Granville Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: () 1-9 Tex: () fcal@sg.fujitsu.com Web: Korea FUJITSU COMPONENTS KOREA LIMITED Alpha Tower #3, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 13 Korea Tel: () Fax: () fcal@sg.fujitsu.com 1 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. Dec 1 th, 1
POWER RELAY. JY Series. 1 POLE - 3, 5A Medium Load Control (AgCdO contacts) Non Promotional (Not for new designs)
POWER RELAY 1 POLE - 3, A Medium Load Control (AgCdO contacts) JY Series Non Promotional (Not for new designs) FEATURES UL, CSA recognized High sensitivity and low power consumption High insulation Wide
More informationPOWER RELAY. JSL Series. 1 POLE - 8A Polarized Latching Type
POWER RELAY 1 POLE - 8A Polarized Latching Type JSL Series FEATURES Small footprint Width: 10mm Height: 12.5mm High insulation Insulation distance : 8.0 mm (between coil and contacts) Dielectric strength
More informationFTR-K1 HIGH CAPACITY 20A TYPE
FTR-K1 HIGH CAPACITY 20A TYPE 1 POLE - Power Relay FTR-K1 Series FEATURES High capacity 20A (1 form A type) Low profile (height: 15.7mm) High insulation. Insulation distance: min. 10mm between coil and
More information1 POLE - 5A Change Over Relay
POWER RELAY 1 POLE - 5A Change Over Relay FTR-F3 Series FEATURES High density mounting Height: 15mm Mounting space: 164mm 2 High insulation Insulation distance: 7mm between coil and contacts (conforms
More informationCOMPACT HIGH POWER RELAY
COMPACT HIGH POWER RELAY 1 POLE - 30A (For automotive applications) FBR3 Series FEATURES Compact for high density packaging High contact capability (30A continuous) High temperature grade (-40 C to 12
More informationCOMPACT HIGH POWER RELAY
COMPACT HIGH POWER RELAY 1 POLE - 40A (For automotive applications) FBR53-HW Series FEATURES Small 40A relay High temperature grade (-40 C to 125 C) Contact arrangement Form U (form A) Surface mount compatible
More informationCOMPACT HIGH POWER RELAY
COMPACT HIGH POWER RELAY For automotive applications POLE - 6A (For 2V Car Battery) FBR59-HW Series FEATURES pole, 6A, form U High temperature grade (-4 C to 25 C) Comparable capability with Power Mini
More informationULTRA MINIATURE RELAY Flat High Frequency Relay Surface mount, 1 GHz-band, 2 Form C FTR-B3-RF Series
Non-promotional not for new designs FTR-K1 SERIES ULTRA MINIATURE RELAY Flat High Frequency Relay Surface mount, 1 GHz-band, 2 Form C FTR-B3-RF Series FEATURES Excellent high-frequency characteristics
More informationPOWER RELAY. FTR-K4 Series. 120A Latching Relay. Preliminary FTR-K1 SERIES
FTR-K1 SERIES POWER RELAY 10A Latching Relay FTR-K Series FEATURES Switching current : 10 A (1 form A) Contact resistance : Max. 0. mω (Initial) Compact size : 3.0 x 37.0 x.0 mm Plastic materials conform
More information1 POLE - 8A Medium Load Control. [Example] JS - 12 M F - K T - V3* - RW (a) (b) (c) (d) (e) (f) (g) (h)
POWER RELAY 1 POLE - 8A Medium Load Control JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile and space saving Height: 12. mm - Mounting
More information1 POLE - 16A 80A Inrush type
POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 1.7mm) High insulation Insulation distance (between coil and contacts): 10mm
More informationCOMPACT POWER RELAY (automotive applications) FTR-P3 Series. Preliminary. 1 POLE - 6A (For 24V car battery) FEATURES. Part Numbers
COMPACT POWER RELAY (automotive applications) 1 POLE - 6A (For 24V car battery) FEATURES Compact for high density packaging. High contact capacity with proven contact material. (100,000 operations, 28V,
More informationFBR57 Series. COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FBR57 Series FEATURES High power contact capacity (carrying current: 40 A/10 minutes, 30 A/1 hour)
More information1 POLE - 5A, TV-3 / TV-5 Type Relay A P. : 1 form A, slim type : 1 form A, flat type
POWER RELAY 1 POLE - 5A, TV-3 / TV-5 Type Relay FTR-F3 Series FEATURES High inrush 51A/78A, TV rating capability Flat and slim power relays Flat type (right angle type): height: 7mm Mounting space: 33mm²
More informationPOWER RELAY. NY Series. 1 POLE - 5A Slim Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Type NY Series FEATURES Slim type with 5 mm thickness - Suited for high density mounting Low power consumption and high sensitivity - Nominal coil power: 120
More informationCOMPACT POWER RELAY. FTR-V1 Series. 1 POLE - 210A Battery Latching relay FTR-K1 SERIES FEATURES. Applications PARTNUMBER INFORMATION
FTR-V1 Series FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 21A Battery Latching relay FEATURES 1 pole 21A 1 form B relay for 12V car battery Low profile Double winding latching relay 21A (at 85 o C) / 12A
More informationPOWER RELAY. FTR-K1 Series 1 POLE - 12A FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 12A FTR-K1 Series FEATURES 12A 3.mm and.mm terminal pitch Low profile (height: 1.7mm) High insulation Insulation distance (between coil and contacts): 1mm min. Dielectric
More information2 POLES-2A High insulation/wide gap
FEATURES 2 Poles, 2 form C Contact gap: more than 0.6mm High surge voltage: 2,500V between open contacts 5,000V between coil & contact Complies with Telcordia (former Bellcore) 2nd level surge Dielectric
More informationFTR-P3 Series (Reflowable)
COMPACT POWER RELAY For automotive applications 1 POLE-25A (for 12V car battery) FTR-P3 Series (Reflowable) FEATURES Compact for high density packaging 1 pole 25A, 1 form A / 1 form C Coil power savings
More informationPOWER RELAY. VF Series. 1 POLE - 20/25/30A - Heavy power control FTR-K1 SERIES. To be discontinued FEATURES
To be discontinued FTR-K1 SERIES POWER RELAY 1 POLE - 20/25/30A - Heavy power control VF Series FEATURES UL, CSA, VDE recognized TV-15 rated 1 form A contact (SPST-NO) Heavy duty 20 to 30A small power
More informationPOWER RELAY. FTR-C1 Series. 2 POLES-2A High insulation/wide gap FTR-K1 SERIES FEATURES
FEATURES 2 Poles, 2 form C Contact gap: more than 0.6mm High surge voltage: 2,500V between open contacts 5,000V between coil & contact Complies with Telcordia (former Bellcore) 2nd level surge Dielectric
More informationHIGH VOLTAGE DC SWITCHING RELAY
HIGH VOLTAGE DC SWITCHING RELAY 1 POLE - 2 / 3A FTR-E1 Series FEATURES 45VDC 2/3A high voltage DC load switching. Non polarized contacts. Switchable for charge/discharge circuit. Low coil power consumption
More informationPOWER RELAY. FTR-MY Series. 1 POLE - 5A Slim Power Relay FTR-K1 SERIES FEATURES. APPLICATIONS PLC, I/O module inverter control
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Power Relay FTR-MY Series FEATURES Width 5mm, height 12mm (31% smaller than NY series) area 100 mm 2, super slim, low power, compact and light weight 2.5gr. Nominal
More information(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with type), RTIII K : Plastic sealed type, RTIII
To be discontinued FTR-K1 SERIES POWER RELAY 1 POLE - 10A VS Series FEATURES UL, CSA, VDE, SEV, CQC recognized TV-5 is available Working class: C UL class B (130 C) coil wire insulation Type of service:
More informationCOMPACT POWER RELAY. FTR-G1 Series. 1 POLE - 25A (For Automotive Applications) FTR-K1 SERIES FEATURES APPLICATIONS PARTNUMBER INFORMATION
FTR-K SERIES COMPACT POWER RELAY POLE - A (For Automotive Applications) FTR-G Series FEATURES Compact for high density packaging High contact capacity with proven contact material (min., operations, V,
More informationJV-KS Series. 1 POLE - 10A High Power Relay POWER RELAY FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION JV - 12 S - K S [Example] (a) (b) (c) (d) (e)
FTR-K1 SERIES POWER RELAY 1 POLE - 10A High Power Relay JV-KS Series FEATURES Low profile and space saving - Height: 12.5 mm - Mounting space: 175 mm 2 High insulation - Insulation distance: 8 mm - Dielectric
More informationULTRA SMALL HIGH VOLTAGE DC RELAY
POWER RELAY ULTRA SMALL HIGH VOLTAGE DC RELAY FTR-J Series FEATURES 0A, 50VDC high-voltage switching ( x 0A, 00VDC switching) Contact voltage drop: typical 0.V Inrush current 50A (capacitive load) Compact
More informationNew relay, production not started, engineering samples available. 1 POLE - 8A Reflow Solderable Relay
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 8A Reflow Solderable Relay JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO)
More information1 POLE - 6A Slim Type (Medium Load Control) (a) Relay type FTR-LY : FTR-LY-Series
POWER RELAY FTR-LY Series FTR-K1 SERIES 1 POLE - 6A Slim Type (Medium Load Control) FEATURES Slim 15.0mm (h) x 5.0 mm (w) x 28.0mm (l) 1 form C and right angle type available Mounting space: 140mm 2, weight:
More informationPreliminary POWER RELAY. FTR-F3 Series. 1 POLE - 10A changeover relay FTR-K1 SERIES FEATURES
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 10A changeover relay FTR-F3 Series FEATURES Low profile and space saving - Height: 15mm - Mounting space:
More information1 POLE - 5A Medium Load Control
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Medium Load Control VE Series FEATURES UL, CSA, VDE, CQC recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in
More informationPOWER RELAY. FTR-K3L-WG Series. 1 POLE - 25A - Latching relay FTR-K1 SERIES FEATURES
POWER RELAY 1 POLE - 25A - Latching relay FTR-K3L-WG Series FEATURES 1 pole, 25A 2 coils latching type 1 Form A Contact gap 1.5mm 2.5kV surge breakdown voltage Compliance with European photovoltaic standard
More informationSIGNAL RELAY. FTR-C2 Series. 2 POLES - 2A High Isolation Wide Contact Gap FTR-K1 SERIES FEATURES
FTR-K1 SERIES SIGNAL RELAY 2 POLES - 2A High Isolation Wide Contact Gap FTR-C2 Series FEATURES DPDT 2A Contact gap: more than 2.0mm Conforms to IEC60950 / EN60950 / UL1950/ CSA C22.2 No.950 Working voltage
More informationFTR-K1 SERIES POWER RELAY 1 POLE - 25A
POWER RELAY 1 POLE - 25A Latching Relay FTR-K3L Series FTR-K1 SERIES FEATURES 1 pole, 25A, 1 form A 2 coils latching type High insulation (between coil and contacts) Insulation distance: clearance min.
More informationULTRA MINIATURE RELAY. FTR-B3 Series. 2 POLES - 2 A (Low Profile Signal Relay) FTR-K1 SERIES FEATURES
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
More informationPOWER RELAY. FTR-F4G Series. 2 POLE - 5A - 1.5mm contact gap FTR-K1 SERIES FEATURES
POWER RELAY 2 POLE - 5A - 1.5mm contact gap FTR-F4G Series FTR-K1 SERIES FEATURES 2 Pole, 5A 2 Form A Contact gap 1.5mm Sealed type available High insulation in small package (between coil and contact)
More informationSILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES NOT FOR NEW DESIGN FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
More informationULTRA MINIATURE RELAY. FTR-B4 Series. 2 POLES - 2 A (Slim Profile Signal Relay) FTR-K1 SERIES FEATURES
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Slim Profile Signal Relay) FTR-B4 Series FEATURES DPDT 2C Ultra miniature slim type relay for surface mounting Height: 9.3 mm maximum (THT) 10 mm maximum
More information1 POLE - 10A Low Profile Type. (c) Coil type A : Standard type (530mW) D : High sensitive type (400mW - V type only)
FTR-K1 SERIES POWER RELAY 1 POLE - 10A Low Profile Type FTR-H1 Series FEATURES Working class: B (for IMQ)/ C (for VDE) Type of service: continuous duty Low profile (height 16.5 mm) 1 form A/ 1 form C 10
More informationFTR-K1 Series 1 POLE - 16A 105 C POWER RELAY FTR-K1 SERIES
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 105 C FTR-K1 Series FEATURES Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and contacts): 10mm min. Dielectric strength: 5KV Surge
More information(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with tape), RTIII K : Plastic sealed type, RTIII
Non-promotional not for new designs FTR-K1 SERIES POWER RELAY 1 POLE - 15A VS-NR Series FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-8 is available Working class: C UL class B (130 C) wire class
More information2 POLES - 2 A (Slim Profile Signal Relay)
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Slim Profile Signal Relay) FTR-B4 Series FEATURES DPDT 2C Ultra miniature slim type relay for surface mounting Height: 9.3 mm maximum (THT) 10 mm maximum
More informationULTRA MINIATURE RELAY. FTR-B3 Series. 2 POLES - 2 A (Low Profile Signal Relay) FTR-K1 SERIES FEATURES
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
More informationPOWER RELAY. FTR-F3 Series 1 POLE - 5A, TV-3 / TV-5 TYPE FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION FTR-F3 P A 012 V [Example] (a) (b) (c) (d) (e)
FTR-K1 SERIES POWER RELAY 1 POLE - 5A, TV-3 / TV-5 TYPE FTR-F3 Series FEATURES High inrush 50A/80A, TV rating capability Flat and slim power relays - Flat type (right angle type): height: 7mm Mounting
More informationFTR-K2G Series. 1 POLE - 20A, 3.0mm contact gap POWER RELAY FTR-K1 SERIES
POWER RELAY FTR-K1 SERIES 1 POLE - 20A, 3.0mm contact gap FTR-K2G Series FEATURES Contact gap min. 3.0mm Full disconnection 1 Pole, 1 Form A Maximum inrush current 120A (TV-8) (UL) (VDE) High insulation
More information2 POLES - 2 A (Low Profile Signal Relay) (b) Terminal type C : Through hole G : Surface mount S : Surface mount, space saving
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
More informationCOMPACT HIGH POWER RELAY
FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 40A (For Automotive Applications) FBR53-HW Series FEATURES Small 40A relay High temperature grade (-40 C to 125 C) Contact arrangement Form U (form A) Surface
More informationFBR57 Series. COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FBR57 Series FEATURES High power contact capacity (carrying current: 40 A/2 minutes, 30 A/1 hour) Suitable
More informationA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. To be discontinued. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms to FCC
More informationPOWER RELAY. NY Series. 1 POLE - 5A Slim Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - A Slim Type NY Series FEATURES Slim type with mm thickness - Suited for high density mounting Low power consumption and high sensitivity - Nominal coil power: 1 mw -
More informationCOMPACT POWER RELAY. FTR-P3 Series. 1 POLE - 25A (for automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 25A (for automotive applications) FTR-P3 Series FEATURES Compact for high density packaging High contact capacity with proven contact material. (100,000 operations,
More informationPreliminary FBR-59-HW. 1 POLE - Small high power 60A relay POWER RELAY FTR-K1 SERIES
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - Small high power 60A relay FBR-59-HW FEATURES 1 pole, 60A, 1 form U High temperature grade (-40 C to
More informationMaximum Load Current 3A SG Series
Non-promotional not for new designs FTR-K1 SERIES SOLID STATE RELAY Maximum Load Current 3A SG Series FEATURES Conforms to UL, CSA Standards Slim, SIL Terminal Type - Size: 9.0 (W) 40.0 (L) 20.0(H) mm
More informationDISCONTINUED (2009) RA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant. FEATURES Ultra high sensitivity
MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationSILENT RELAY. FTR-P5 Series. 1 POLE - 25A (for automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES SILENT RELAY 1 POLE - 25A (for automotive applications) FTR-P5 Series FEATURES Low operating sound An original silent mechanism decreases the propagation of operating sound when mounted on
More informationJV SERIES 1 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) JV SERIES RoHS compliant FEATURES UL, CSA, VDE, SEMKO recognized UL class B (130 C) insulation Low profile and space saving Height: 12.5 mm Mounting space:
More informationFBR51 Latching Series
FTR-K1 SERIES COMPACT POWER RELAY 2 POLE - 30A (For Automotive Applications) FBR51 Latching Series FEATURES Magnetically latched PCB relay Increased ambient temperature range up to 125C Two coils with
More informationRA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS Compliant
More informationRA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
More information(a) Relay type FBR51 : FBR51 Series - Standard type (contact gap 0.3 mm) FBR52 : FBR52 Series - Wide contact gap type (contact gap 0.
FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 30A (For Automotive Applications) FBR51, 52 Series FEATURES Compact and light weight structure High current contact capacity (carrying current: 35 A/10 minutes,
More informationMAXIMUM LOAD CURRENT 1 A SJ SERIES
SOLID STATE RELAY MAXIMUM LOAD CURRENT 1 A SJ SERIES RoHS compliant FEATURES UL, CSA recognized Extremely small and light weight Size: 10.0 (W) 20.2 (L) 12.8 (H) mm Weight: approximately 5.5g High reliability,
More informationDDR-3 DIMM Vertical Mount Socket
Not for New Designs DDR-3 DIMM Vertical Mount Socket FCN-07 Series FEATURES DDR-3: 240pin DIMM socket connector (press-fit or through hole type) Fujitsu original unique structure for twin contact points
More information1 POLE 8 A (MEDIUM LOAD CONTROL)
FUJITSU TAKAMISAWA COMPONENT CATALOG POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form
More information2 POLES 1 to 2 A (FOR SIGNAL SWITCHING)
FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part
More informationFUJITSU Component Connector FCN-074B / 078B series Card Edge Connector for DDR4 Memory Module
FUJITSU Component Connector FCN-074B / 078B series Card Edge Connector for DDR4 Memory Module Not for New Designs Overview This is a 288-pin DIMM socket that conforms to JEDEC standards. RoHS compliant
More informationRY SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Ultra high sensitivity UL, CSA recognized Conforms to FCC rules and regulations Part 68 Surge strength 1,500 V High dielectric strength
More informationNOT FOR NEW DESIGNS AS SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Flat type relay for surface mounting Super small and light weight Height: 6.5 mm Weight: approximately 1.5 g UL, CSA recognized Conforms
More informationJV SERIES 1 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) JV SERIES RoHS compliant FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) insulation Low profile and space saving Height: 12.5 mm Mounting space:
More informationData Sheet Fujitsu Narrow Pitch Stacking Connector FCN-280 Series
ata Sheet FCN-28 series Not for New esign ata Sheet Fujitsu Narrow Pitch Stacking Connector FCN-28 Series Fujitsu board-to-board narrow pitch stacking connector for use in measurement and factory automation
More informationDISCONTINUED (1999) UR1 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES ( SIGNAL HIGH FREQUENCY ) SWITCHING UR1 SERIES FEATURES Subminiature polarized relay Excellent high frequency characteristics Isolation : minimum 60 db } at 900 MHz Insertion loss:
More informationFUJITSU, years of experience Thermal Printers
FUJITSU, years of experience Thermal ers 1 ABOUT FUJITSU COMPONENTS Fujitsu Components Thermal ers Page 02 PRODUCT LINE-UP FTP-602 Page 03 FTP-607 Page 04 FTP-608 Page 05 FTP-609 Page 06 FTP-63A Page 07
More informationFUJITSU Component Thermal Printer FTP-63HMCL153 series
FUJITSU Component Thermal Printer FTP-63HMCL153 series Fujitsu 3 high speed thermal printer mechanism Overview The compact, low voltage FTP-63HMCL series provides an ultra low profie design and high speed
More informationBATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER. FTP-62DMCL101#02/111#02, Easy Loading Method FTP-62DMCL101#02/111#02 OVERVIEW HIGHLIGHTS
BATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER, Easy Loading Method OVERVIEW The 2-inch (58mm), FTP-62DMCL series is an ultra compact, low voltage thermal printer mechanism with a removable
More informationFUJITSU Component Thermal Printer FTP-64GMCL153 series
FUJITSU Component Thermal Printer FTP-64GMCL153 series Fujitsu 4 high speed (200mm/s)thermal printer mechanism Overview The FTP-64GMCL series thermal printer driven by 24VDC provides high speed printing
More informationFUJITSU Component Thermal Printer FTP-62GMCL153/453 series
FUJITSU Component Thermal Printer FTP-62GMCL153/453 series Fujitsu 2 high speed (200mm/s)thermal printer mechanism Overview The compact, ultra low profile design FTP-62GMCL series thermal printer (driven
More informationDISCONTINUED in FBR-512WR HAS BEEN DISCONTINUED in 2012
COMPACT POWER RELAY POLE A (FOR AUTOMOTIVE FLASHER LAMP LOAD APPLICATIONS ),2 ( WR) SERIES FEATURES Relay for flasher lamp load (automotive application) newly added to our compact power relay, Series.
More informationFUJITSU Component Thermal Printer FTP-62GMCL153/453 series
FUJITSU Component Thermal Printer FTP-62GMCL153/453 series Fujitsu 2 high speed (200mm/s)thermal printer mechanism with cutter option Overview The compact, ultra low profile design FTP-62GMCL series thermal
More informationFUJITSU Component Thermal Printer FTP-63GMCL153/453 series
FUJITSU Component Thermal Printer FTP-63GMCL153/453 series Fujitsu 3 high speed (up to 200mm/s) thermal printer mechanism with cutter option Overview The FTP-63GMCL series thermal printer driven by 24VDC
More informationMEMORY CARD CONNECTORS (JEIDA CONFORMABLE)
MEMORY CARD CONNECTORS (JEIDA CONFORMABLE) 560H SERIES DRAM CARD CONFORMING TO Ver. 1 FEATURES These connectors conform to the Japan Electronic Industry Development Association (JEIDA) DRAM card Ver. 1.0
More informationFTP-628MCL401#01/451#01
BATTERY DRIVEN, FTP-608 Series 2 HIGH SPEED THERMAL PRINTER FTP-628MCL401#01/451#01 OVERVIEW The FTP-628 MCL Series are battery driven high-speed printers with a 2-inch paper width equivalent. The FTP-628
More informationFUJITSU, years of experience Wireless modules & Beacons
FUJITSU, years of experience Wireless modules & Beacons Fujitsu Components Wireless Modules & Beacons Fujitsu Components wireless modules are designed to offer an easy solution to make applications wireless.
More informationMaterials. Specification Operating temperature range. 55 C to +105 C Current rating
PC BOARD CONNECTORS 700 SERIES Features The 700 series connector has a superior ejector with a unique flexible latch. Terminals are palladium plated and have an excellent cost performance ratio. The solder
More informationFTP-627MCL053/ V DRIVEN, FTP-607 Series 2 HIGH SPEED THERMAL PRINTER FTP-627MCL053/054 OVERVIEW HIGHLIGHTS
24V DRVEN, FTP-607 Series 2 HGH SPEED THERMAL PRNTER FTP-627MCL053/054 OVERVEW The FTP-627 MCL Series are 24V driven high-speed printers with a 2-inch paper width equivalent. The FTP-627 MCL Series can
More information24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 2 TYPE MECHANISM (Cutter option) FTP-629MCL103/383
24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 2 TYPE MECHANISM (Cutter option) VERVIEW The FTP-609MCL Series thermal printer (driven by 24VDC) provides ultra-high speed printing (200mm/s) for 2-inch
More informationSPST-NO SPDT DPST-NO DPDT
Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_2_ Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More information2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION
2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-086 /087 SERIES OVERVIEW Fujitsu s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards developed to support high-speed
More informationMEMORY CARD CONNECTORS (PCMCIA CONFORMABLE)
MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE) 560H SERIES FEATURES The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer Memory Card International
More informationFUJITSU Component Thermal Printer FTP-638WSL100 series (Easy Loading Method)
FUJITSU Component Thermal Printer FTP-638WSL100 series (Easy Loading Method) Fujitsu compact, battery drive, 3 high speed, standalone thermal printer Overview The supply voltage of the FTP-638WSL Series
More information24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 3" TYPE MECHANISM (with cutter) FTP-639MCL064R/113R/364/#70/393R
24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 3" TYPE MECHANISM (with cutter) FTP-639MCL064R/113R/364/#70/393R VERVIEW The FTP-609MCL Series thermal printer (driven by 24VDC) provides ultra-high
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_4_4 Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More information2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION
mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-86 /87 SERIES OVERVIEW Fujitsu s mm hard metric connector F-PACK-3 (FCN-86/87 series) are connectors for connecting boards developed to support high-speed
More information7. Approved Standards US: UL, CSA UL: FILE No.E CSA: FILE No.LR31928) 8. Special Function None : Standard U : For ultrasonically cleanable
Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW (Rated power consumption: mw) pickup coil power. Impulse withstand of 1,V ( 1 μs) meets FCC requirements. Stick packing employed
More informationV REG.-Nr. 3919, Z E214024
General Purpose Relays SCHRACK Miniature Power PCB Relay MSR 1 pole 8 / 10 A, 1CO or 1NO contact High inrush currents with AgSnO contacts (TV4 = 65 A) 4 kv/8 mm coil-contact Reinforced insulation (protection
More informationPRELIMINARY FUJITSU Component Thermal Printer FTP-62GUSL001-R series (High Speed)
PRELIMINARY FUJITSU Component Thermal Printer FTP-62GUSL001-R series (High Speed) Fujitsu 2 high speed (150mm/s)thermal printer unit with cutter option Overview The FTP-62GUSL series thermal printer (driven
More informationTransistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
More informationFUJITSU, years of experience Wireless Solutions
FUJITSU, years of experience Wireless Solutions 1 Introduction >> FUJITSU Components Wireless Solutions Introduction FUJITSU Components wireless product portfolio consists of a wide and constantly growing
More informationDISCONTINUED FTP-632UCL531 / USL530 DESIGNATION
24V driven receipt printer unit 3 printer unit FTP-632UCL531 / USL530 Overview The FTP-632 UCL/USL Series is 24V driven receipt printer unit with cutter for 3 inch wide paper. The unit has our high-speed
More information4-Port Intelligent KVM Switch SERVIS FS-1004MT Series NC14004-B042 R
-Port Intelligent Switch SERVIS FS-100MT Series NC100-B02 R SERVIS has the answer to realizing more reliability, availiability, and seviceability, saving space and cutting costs in your network or server
More information