ANALOG ACTIVE CARD. (PCIe) Up to 4 analog ports (FXO/FXS)

Transcription

1 ANALOG ACTIVE CARD (PCIe) Works with FreeSWITCH Up to 4 analog ports (FXO/FXS) Simple Installation: Detects as Network Card Modular Design OS Independent (Windows & Linux Support) 128ms DSP based Echo Cancellation Card is inter operable with soft PBX like 3CX, ASTERISK and many more DESIGNED & MANUFACTURED IN INDIA

2 Why ACTIVE? All of the cards available on the market are called PASSIVE or DUMB cards. The difference is that our card takes care of the majority of operation on board thus reducing the load on the CPU. Furthermore, our product is detected as a network card in both Linux and Windows systems. Once the driver is installed in your system, you can start configuring the card through an easy to use interface and start using it with your preferred PBX platform (3CX, Asterisk, Elastix...). Hardware DSP for Line Echo Cancellation (carrier grade 128ms) and transcoding is included. Features Compatible with 3CX, Elastix, Asterisk, Trixbox, FreePBX, FreeSwitch and others. Windows/Linux compatible (all versions) Minimum Hardware Requirment Dual Core Processor 1 GB RAM Available PCIe slot On board 128ms hardware Line Echo Cancellation DSP. 0 On board Transcoding (G711 ulaw/alaw, G722, G723.1, G729) DSP Operation temperature: 00C to 50 C Storage temperature: -400C to 1250C Dimensions: 16.8cm x 10.8cm x 1.7cm Weight: 158g 4 analog ports (FXO or FXS) T.38 fax relay Pre configured for almost plug and play experience. Clean and easy to understand GUI Caller ID supported DF Digit Detection and Generation supported SIP User Agent IETF RFC3261 compliant acae - 4 Port Analog base card (PCIe) acasm - FXS Module acaom - FXO Module For more information please contact Canada: andre@allo.com India:

3 INTERCHANGEABLE E1/T1 PRI CARD (PCI/PCIe) Certified by FREEDOM TO COMMUNICATE I n t u i t i v e Te l e p h o n y Also works with FreeSWITCH PCI & PCIe interfaces on the same board Supports SS7 signaling Simple Installation: No additional DAHDI patch required Hardware based Echo Cancellation Fully PCI 2.2/PCIe compliant DESIGNED & MANUFACTURED IN INDIA

4 We guarantee that our card, working directly with DAHDI (no patch required), delivers the same sound quality and performance as the Digium and Sangoma cards while costing considerably less. PRI cards today became a commodity since all manufacturers use FPGAs and the same Octasic DSP for their Echo Cancellation. Not only our cards perform at par with the larger manufacturers but they also offer the Innovative and Unique PCI/PCIe Rotation System. Available in 4 port, use this card with any of the major open source platforms. Key Features SS7 Signaling supported PCI and PCIe interface on the same card. Fully PCI 2.2/PCIe (X1) compliant Four T1/E1/J1 ports with PCI-Express interface for high performance voice applications Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU Optional Octasic DSP Echo Cancellation Module 128ms tail/channel (on all channel densities) PRI Switch Compatibility: EuroISDN, Network or CPE, AT&T 4ESS, CAS Voice Modes Interoperable with Asterisk, Freeswitch, YATE, Elastix, Trixbox, FreePBX... Minimum Hardware Requirment (120 concurrent calls) Dual core processor 2 GB RAM Available PCI/PCIe slot For more information please contact Canada: andre@allo.com India:

5 UPGRADABLE E1/T1 PRI CARD 1/2/4 Ports (PCIe) Certified by FREEDOM TO COMMUNICATE I n t u i t i v e Te l e p h o n y Also works with FreeSWITCH PRI/SS7 Signaling supported Both PRI NET and PRI CPE are supported Field upgradable firmware for future updates Hardware based Echo Cancellation PCIe compliant DESIGNED & MANUFACTURED IN INDIA

6 First of its kind in the industry, our card allows you to upgrade the firmware and unlock the number of ports which can be used on the card. The card is mounted with 2 ports by default. If you buy a 1 port card and later pay the upgrade, the second port will be unlocked. If you buy a 2 port card and later upgrade to 4, the firmware will unlock the resources to run the 4 ports and we will ship you the port splitters required to turn the card into 4 ports. You can also upgrade from 1 to 4 ports directly. This 2nd generation card is half height and comes by default with both full and half height metal bracket. The card is manufactured with the highest quality components and PCB in our fully automatic Surface Mount Technology factory. ALLO supports the Asterisk community and has opted NOT to copy the Digium PCI ID, like other manufacturers do unlawfully and against the will of Digium. For you, the customer, this means you are buying a card which will continue to work with DAHDI when Digium, the owner of Asterisk, decides to change their code in order to block the rogue manufacturers. Use our patched DAHDI version provided. Should you choose to purchase the optional Line Echo Cancellation module which uses the industry standard Octasic DSP, you will also receive for FREE our Conference Room Software. Once installed, the software allows you to set up, schedule and manage conferences which are MIXED IN THE Octasic DSP. Hardware conference mixing is much more superior in sound quality and won't use any CPU resources. Finally, all our 2nd generation cards are sold with the ALLO Card Installation Software. If you decide to use it, the card installation and configuration will be quick and easy, no more commands. Check below the access to the DEMO GUI of the ALLO Card Installation Software and Conference Room Software.

7 Key Features Supports both E1, T1, J1 environments and is software-selectable on a per-card or per-port basis Half length and low profile PRI/SS7 Signaling supported Both PRI NET and PRI CPE are supported Upto 4 T1/E1/J1 ports with PCI-Express interface for high performance voice applications On board DMA support. Field upgradable firmware for future updates. Interoperable with Asterisk, Freeswitch, YATE, Elastix, Trixbox, FreePBX... Minimum Hardware Requirment Dual core processor 2 GB RAM Available PCIe slot Physical & Environmental Operation temperature: 0 C to 50 C Storage temperature: -40 C to 125 C Dimension: 12.6cm X 6.5cm X 1.5cm Weight (1 port): 68 grms Weight (2 port): 78 grms Target Application Legacy PBX/IVR Services Voice-over Internet Protocol (VoIP) Services Complex IVR Trees Meet-Me Bridge Conferencing VoIP Gateways Calling Card Platforms PRI Switch Compatibility Network or CPE Tech Specs Upto 4 T1/E/J1 ports with PCI-Express interface for high performance voice and data applications TDM channel alignment in hardware (instead of software), for greater voice integrity and reliability Interrupts frequency adjustment Optional Octasic DSP Echo Cancellation Module 128ms tail/channel (on all channel densities) Hardware-level HDLC handling to reduce the load on the host CPU DMA based data transfer for minimum host intervention and guaranteed data integrity on high volume systems TDM clocking mode selectable as Slave or Master PCI Express: 1 Lane PCI Express bus For more information please contact Canada: andre@allo.com India:

8 2aCP1e-H : 1 Port PRI Card (PCIe) 2aCP1eL-H : 1 Port PRI Card (PCIe) + LEC 2aCP2e-H : 2 Ports PRI Card (PCIe) 2aCP2eL-H : 2 Ports PRI Card (PCIe) + LEC 2aCP4e-H : 4 Ports PRI Card (PCIe) 2aCP4eL-H : 4 Ports PRI Card (PCIe) + LEC For more information please contact Canada: andre@allo.com India:

9 8 Port E1/T1 PRI CARD (PCIe) Certified by FREEDOM TO COMMUNICATE I n t u i t i v e Te l e p h o n y Also works with FreeSWITCH PRI/SS7 Signaling supported Both PRI NET and PRI CPE are supported Field upgradable firmware for future updates Hardware based Echo Cancellation DESIGNED & MANUFACTURED IN INDIA

10 We guarantee that our card, working directly with DAHDI (no patch required), delivers the same sound quality and performance as the Digium and Sangoma cards while costing considerably less. PRI cards today became a commodity since all manufacturers use FPGAs and the same Octasic DSP for their Echo Cancellation. Available in 8 ports, use this card with any of the major open source platforms. Key Features Supports both E1, T1, J1 environments and is software-selectable on a per-card or per-port basis PRI/SS7 Signaling supported Both PRI NET and PRI CPE are supported Upto 8 T1/E1/J1 ports with PCI-Express interface for high performance voice applications Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU Field upgradable firmware for future updates. Interoperable with Asterisk, Freeswitch, YATE, Elastix, Trixbox, FreePBX... Minimum Hardware Requirment Dual core processor 2 GB RAM Available PCIe slot Target Application Legacy PBX/IVR Services Voice-over Internet Protocol (VoIP) Services Complex IVR Trees Meet-Me Bridge Conferencing VoIP Gateways Calling Card Platforms PRI Switch Compatibility Network or CPE Tech Specs Upto 8 T1/E/J1 ports with PCI-Express interface for high performance voice and data applications TDM channel alignment in hardware (instead of software), for greater voice integrity and reliability Interrupts frequency adjustment Optional Octasic DSP Echo Cancellation Module 128ms tail/channel (on all channel densities) Hardware-level HDLC handling to reduce the load on the host CPU PCI Express: 1 Lane PCI Express bus DMA based data transfer for minimum host intervention and guaranteed data integrity on high volume systems TDM clocking mode selectable as Slave or Master For more information please contact Canada: andre@allo.com India:

11 8 Ports PRI Card Physical & Environmental Operation temperature: 0 C to 50 C Storage temperature: -40 C to 125 C Dimension : 15cm X 6.7cm X 1.5cm Weight: 122 grms For more information please contact Canada: andre@allo.com India:

12 First Generation E1/T1 PRI CARD (PCI/PCIe) Certified by FREEDOM TO COMMUNICATE I n t u i t i v e Te l e p h o n y Also works with FreeSWITCH Supports SS7 signaling Hardware based Echo Cancellation Fully PCI 2.2/PCIe compliant DESIGNED & MANUFACTURED IN INDIA

13 This card supports SS7 signaling and uses a DAHDI patch which is already included in our proprietary driver. We use the exact same chipsets as the other more expensive brands but since this is the 1st gen board design, it is VERY affordable. A 128 ms hardware based Line Echo Cancellation module can be added to reach the highest standard in voice quality on the market. Build your own open source PBX system while keeping cost at a minimum. Chose from 1-2 or 4 ports with a capacity of 30 channels per port and full duplex data throughput. Features Our PRI cards support SS7 signaling 128 ms Hardware based Line Echo Cancellation on Octasic DSP Elastix Certified and works with Asterisk, Freeswitch, YATE, Askozia, Trixbox and more. 1, 2 and 4 ISDN-32 PRI T1/E1 ports with 30 B channels and 1 D channel per span EuroISDN (PRI or PRA) - Q.931/Q.921 Fully PCI 2.2/PCIe compliant RJ 48 connector Suitable for 3.3 volts and 5.0 volts 32 bit PCI 2.2 slots Minimum Hardware Requirment Dual core processor 2 GB RAM Available PCI/PCIe slot For more information please contact Canada: andre@allo.com India:

14 BRI CARD (PCI/PCIe) Certified by FREEDOM TO COMMUNICATE I n t u i t i v e Te l e p h o n y Also works with FreeSWITCH Each of the 4 ports can be independently configured for TE or NT mode Line Echo Cancellation Fully PCI 2.2/PCIe compliant DESIGNED & MANUFACTURED IN INDIA

15 Certified by ELASTIX, our BRI card uses the same Cologne chipset as all the other manufacturers, yet costs less. It supports the EURO and US flavor ISDN (2B+D) circuits. Easy jumper settings allows for either ISDN lines or phones to be connected to the cards 2 or 4 ports. Features 64 ms tail line echo cancellation powered by Minimum Hardware Requirment Dual core processor Octasic 1 GB RAM 2 or 4 BRI ports interface Available PCI/PCIe slot Up to 8 simultaneous voice calls over 4 ISDN BRI lines Independently configure each port for TE or NT Conference bridge Onboard power feeding Point-to-point (TE/NT) and point-to-multipoint (TE/NT) Euro ISDN protocol stack Fully PCI 2.2/PCIe compliant Compatible with 5V and 3.3V PCI busses automatically detectable DF detection on all B-channels For more information please contact Canada: andre@allo.com India:

16 GSM CARD (PCI/PCIe) Certified by FREEDOM TO COMMUNICATE I n t u i t i v e Te l e p h o n y Also works with 1 SIM card per GSM channel SMS Support Works directly with DAHDI (no patch required) Echo cancellation for digital audio quality User can modify IMEI and PIN DESIGNED & MANUFACTURED IN INDIA

17 Our Elastix approved GSM card works directly with DAHDI (no patch required) and it features the front SIM load mechanism for easy access after installation. The customer can also change the IMEI with a 3rd party software. Use this card with any Open Source platform to convert GSM calls to IP and vice versa. A sturdy and durable solution for remote locations. Features Minimum Hardware Requirment Echo cancellation for digital audio quality Dual core processor User can modify IMEI and PIN 1 GB RAM 1, 2 or 4 GSM modules Available PCI/PCIe slot Quad-band GSM 850/ 900/1800/1900 MHz Send/Receive SMS in text mode, AT command ready Compatible with Asterisk/ FreeSwitch/ Elastix/ TrixBox based applications Front Plate SIM Load technology (switch cards in a few seconds) GSM modules are AT&T certificated USSD, CLIP, CLIR supported DF detection ready Up to 4 simultaneous GSM calls Support external antenna Uses GSM channel driver Bi-directional calls (Inbound and Outbound calls) Fast and easy installation Available in both PCI and PCIe 4 LEDs (network state indicators) Suitable for 3.3 volts and 5.0 volts 32 bit PCI slots For more information please contact Canada: andre@allo.com India:

18 TRANSCODING CARD (PCIe) Certified by FREEDOM TO COMMUNICATE I n t u i t i v e Te l e p h o n y Also works with FreeSWITCH Handle up to 400 Transcoding Sessions Wide Range of Audio Codec Support Integrates with Asterisk & Freeswitch based systems PCIe compliant DESIGNED & MANUFACTURED IN INDIA

19 IP telephony applications commonly require the use of multiple voice codecs used to digitally compress voice signals and save on bandwidth. Our Transcoding card supports all the audio codecs. Voice signals from the PSTN come in the form of the G.711 codec, but the VoIP terminal equipment and networks can support a variety of different voice codecs, such as G.729. The VoIP infrastructure needs the capability to mediate between endpoints supporting different codecs. Our Transcoding cards are designed to handle complex codec translation, using dedicated DSP resources, which would otherwise be processed by host CPU in software. This card greatly reduces the MIPS or CPU consumption, so that it can be used for handling other tasks. Our Transcoding cards are available in PCI express form, converts simultaneous channels of transcoding from one type of codec (e.g. G.711) to another (e.g. G.729), without affecting latency or using up precious host CPU resources. Features This card can handle 64, 128, 256 or 400 trascoding Sessions Supports G722.2, AMR, GSM-EFR, GSM-FR, G.711, G.722, G.722 1C/Siren 14, G.723.1, G.726, G.729AB, T.38 FAX, ilbc PCIe compliant Integrates with open source platforms such as Asterisk, Freeswitch, Elastix, YATE and more Minimum Hardware Requirment Dual core processor 1 GB RAM Available PCIe slot For more information please contact Canada: andre@allo.com India:

20 Pricing Information E1/T1/J1 PRI Card Sl. No. Description Reseller Pricing (USD) MSRP Pricing (USD) 1 Upgradable PRI card - 1 port Upgradable PRI card with LEC - 1 port Upgradable PRI card - 2 port Upgradable PRI card with LEC - 2 port Interchangeable PRI card - 4 port Interchangeable PRI card with LEC - 4 port port PRI card port PRI card with LEC Gen PRI card (PCI & PCIe) - 1 port st st 10 1 Gen PRI card (PCI & PCIe) with LEC - 1 port st Gen PRI card (PCI & PCIe) - 2 port Gen PRI card (PCI & PCIe) with LEC - 2 port st st 13 1 Gen PRI card (PCI & PCIe) - 4 port st Gen PRI card (PCI & PCIe) with LEC - 4 port BRI Card Sl. No. Description Reseller Pricing (USD) MSRP Pricing (USD) 1 BRI card (PCI & PCIe) - 2 port BRI card (PCI & PCIe) with LEC - 2 port BRI card (PCI & PCIe) - 4 port BRI card (PCI & PCIe) with LEC - 4 port Analog Active Card (FXO/FXS) Sl. No. Description Reseller Pricing (USD) MSRP Pricing (USD) 1 Analog base card FXS Module FXO Module port FXO/FXS card

21 GSM Card Sl. No. Description Reseller Pricing (USD) MSRP Pricing (USD) nd nd nd nd st 1 2 Gen GSM card - 1 Module 2 2 Gen GSM card - 2 Modules 3 2 Gen GSM card - 3 Modules 4 2 Gen GSM card - 4 Modules 5 1 Gen GSM card - 1 Module st Gen GSM card - 2 Modules st Gen GSM card - 4 Modules Reseller Pricing (USD) MSRP Pricing (USD) Transcoding Card Sl. No. Description 1 Transcoding Card - 64 channels (PCIe) Transcoding Card channels (PCIe) Transcoding Card channels (PCIe) Transcoding Card channels (PCIe) For orders $4k and above, please contact us Contact Information Andre Martin Strul Chief Marketing Officer Phone: Toll Free (US/Canada): ALLO (2556) wholesales@allo.com andre@allo.com