ZOTAC ZBOX pico. User s Manual

Size: px

Start display at page:

Download "ZOTAC ZBOX pico. User s Manual"

Frederick Fisher
5 years ago
Views:

1 291-MB307-04Q3F

ZOTAC ZBOX pico User s Manual No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

2 ZOTAC ZBOX pico User s Manual No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except by the purchaser for backup purposes, without the express written permission of ZOTAC. Products and corporate names mentioned in this manual may be registered trademarks or copyrights of their respective companies, and are used for identification purposes only. All trademarks are the property of their respective owners. Every effort has been made to ensure the contents of this manual are correct and up to date. However, the manufacturer makes no guarantee regarding the accuracy of its contents, and reserves the right to make changes without prior notice. 1 ZOTAC ZBOX pico

3 Table of Contents Product specifications Safety information Setting up your system Care during use Welcome Package contents Port Layout Getting started with Windows Using your ZOTAC ZBOX pico Configuring a wireless connection Configuring an Ethernet connection Using a static IP Using a dynamic IP (PPPoE connection) Configuring audio output via an HDMI device ZOTAC ZBOX pico 2

4 Product specifications Product Dimensions mm x 42.5mm x 17mm Processor Intel Atom x5-z8350 Processor (quad core, 1.44 GHz up to 1.92 GHz) Graphics processor Intel HD graphics 400 HDMI output (max resolution: Memory 2GB DDR3L-RS1600 memory USB ports One USB 3.0 port Storage 32GB emmc 3-in-1 card reader (Micro SD/SDHC/SDXC) Networking 10/100Mbps Ethernet Wireless networking ac Wi-Fi Bluetooth 4.2 Operating System Windows 10 Home (x86) preinstalled 3 ZOTAC ZBOX pico

5 Safety information Your ZOTAC ZBOX pico is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system Read and follow all instructions in the documentation before operating your system. Do not use this product near water or a heat source such as a radiator. Set up the system on a stable surface. Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure you leave plenty of space around the system for ventilation. Never insert objects of any kind into the ventilation openings. Use this product in environments with ambient temperatures between 0 and 35. Care during use Do not walk on the power cord or allow anything to rest on it. Do not spill water or any other liquids on your system. When the system is turned off, a small amount of electrical current still flows. Always unplug all power, modem, and network cables from the power outlets before cleaning the system. If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer. ¾ The power cord or plug is damaged. ¾ Liquid has been spilled into the system. ¾The system does not function properly even if you follow the operating instructions. ¾ The system was dropped or the cabinet is damaged. ¾The system performance changes. ZOTAC ZBOX pico 4

Welcome Congratulations on your purchase of the ZOTAC ZBOX pico. The following illustration displays the package contents of your new ZOTAC ZBOX pico.

6 Welcome Congratulations on your purchase of the ZOTAC ZBOX pico. The following illustration displays the package contents of your new ZOTAC ZBOX pico. Please contact your retailer if any of the below items are damaged or missed. Package contents 1 x ZOTAC ZBOX pico 1 x AC adapter 1 x HDMI extension cable 1 x Antenna 1 x OS Recovery DVD (optional) 1 x Warranty Card 1 x User Manual 1 x Quick Start Guide 5 ZOTAC ZBOX pico

7 Port Layout ZOTAC ZBOX pico 6

8 1. MicroSD memory card slot The built-in memory card reader supports Micro SD/SDHC/SDXC cards to expand the storage capabilities of the ZOTAC ZBOX pico. 2. Wi-Fi antenna connector The Wi-Fi antenna connector supports the included Wi-Fi antenna. 3. HDMI port The HDMI (High Definition Multimedia Interface) port supports a Full HD 1080p displays such as an HDTV or monitor. 4. Power input (DC 5V, 3A) The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the mini-pc. To prevent damage to the mini-pc, always use the supplied power adapter. 5. Ethernet port The eight-pin RJ-45 LAN port supports standard Ethernet cable for connection to a local network. 6. USB 3.0 port The USB 3.0 port supports SuperSpeed USB 3.0 devices and is backwards compatible with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for maximum performance with USB 3.0 compatible devices. 7. Power button The power button turns the system ON and OFF. Note 1: The power adapter may get warm or hot when in use. Do not cover the adapter and keep it away from your body. Note 2: Due to the unique design, some connectors are placed upside down. 7 ZOTAC ZBOX pico

9 Getting started with Windows 10 Please follow the steps below to begin using your ZBOX pico with Windows Power on the system. 2. Connect to the Internet via Ethernet or Wi-Fi. 3. Select the language and region. ZOTAC ZBOX pico 8

10 4. Read and accept the license terms. 5. We recommend using the express settings. 9 ZOTAC ZBOX pico

11 6. Create a Microsoft new account if you don t have one. Otherwise, select Sign in. 7. Setup your account. ZOTAC ZBOX pico 10

12 8. Wait for the initial system setup to complete. 11 ZOTAC ZBOX pico

After connection is established, you will see Connected.

13 Using your ZOTAC ZBOX pico Configuring a wireless connection Please follow the instructions below to connect to a wireless network: 1. Double-click the wireless network icon (pic) in the notification area. 2. Select the wireless network you want to connect to from the list and click Connect. 3. After connection is established, you will see Connected. Note 1: For security concerns, Do NOT connect to an unsecured network, otherwise, the transmitted information without encryption might be visible to others. Note 2: Enter the network security key if necessary. Configuring an Ethernet connection Using a static IP 1. Right-click the network icon in the notification area and select Open Network Connections. 2. Right-click Local Area Connection and select Properties. 3. Highlight Internet Protocol (TCP/IP) and click Properties. 4. Select Use the following IP address. 5. Enter your IP address, subnet mask and Default gateway. 6. Enter the preferred DNS server address if necessary. 7. After entering all of the related values, click OK to finish the configuration. ZOTAC ZBOX pico 12

14 Using a dynamic IP (PPPoE connection) 1. Repeat Step 1-3 in the previous section. 2. Select Obtain an IP address automatically and click OK. 3. Click Create a new connection to start the NEW Connection Wizard. 4. Click Next. 5. Select Connect to the Internet and click Next. 6. Select Set up my connection manually. 7. Select your connection type and click Next. 8. Enter your ISP Name and click Next. 9. Enter your User name and Password. Click Next. 10. Click Finish to finish the configuration. 11. Enter your user name and password. Click Connect to connect to the internet. Note: Contact your internet Service Provider (ISP) if you have problems connecting to the network. 13 ZOTAC ZBOX pico

Configuring audio output via an HDMI device Follow the steps below to enable audio output via HDMI when connecting the ZOTAC ZBOX pico to a TV or receiver via HDMI. 1.

15 Configuring audio output via an HDMI device Follow the steps below to enable audio output via HDMI when connecting the ZOTAC ZBOX pico to a TV or receiver via HDMI. 1. Access the Sound settings via the system Control Panel. 2. Under Playback devices, click the display device that corresponds with your HDMI audio compatible display 3. Click the Set Default button in the lower right hand corner. 4. Click OK to exit the setup. ZOTAC ZBOX pico 14

16 15 ZOTAC ZBOX pico

17 ZOTAC ZBOX pico MB307-04

291-MB309-03M8F. PI330 pico

291-MB309-03M8F. PI330 pico 291-MB309-03M8F PI330 pico ZOTAC ZBOX pico User s Manual No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval