ESM-5907 MOTORIZED INSERTION STANDARD TYPE MAGNETIC CARD READER & IC CARD READER/WRITER WITH RS-232C INTERFACE
|
|
- Carmella Watts
- 5 years ago
- Views:
Transcription
1 DOC. NO. ESM-5907 REV. PAGE DATE SPECIFICATION A 1 OF ESM-5907 MOTORIZED INSERTION STANDARD TYPE MAGNETIC CARD READER & IC CARD READER/WRITER WITH RS-232C INTERFACE KyungDuck Bldg, 518-5, Tunchon-Tong Kangtong-Ku, Seoul, KOREA TEL : FAX : AD-A39 (210mm 297mm)
2 DOC. NO. ESM-5907 REV. PAGE DATE SPECIFICATION A 2 OF APPROVAL RESP. DEPT. R & D ORIGINATOR HONG YU DEPT. Int l Sales QA APPROVAL & CONFIRMATION APPROVED BY DEPT. DOC.CONTROL APPROVAL APPROVED BY REVISION HISTORY CHECK ISSUED DATE DESCRIPTION TOTAL PAGE ISSUE ESM-5907 SPECIFICATION ISSUE 19 PAGE AD-A40 (210mm 297mm)
3 SPECIFICATION A 3 OF CONTENTS 1. GENERALS SYSTEM BLOCK DIAGRAM SPECIFICATIONS INTERFACE REQUIREMENTS COMMUNICATION PROTOCOL SEQUENCE COMMUNICATION PROTOCOL DESCRIPTIONS COMMUNICATION DETAILS DIMENSION GENERALS 1.1. Overview
4 SPECIFICATION A 4 OF This model is a motorized insertion slim type magnetic stripe and IC card reader with RS-232C interface and IFM(Interface Module) that is to decode data on triple (dual, single ) track of magnetic stripe and *IC card in accordance with ISO 7811/7816. ( Please refer to model Information table about each functional option.) * IC CARD is applied to t=0, t=1, and EMV protocol with additional support for selective synchronous IC cards Features Mechanically designed for robust body structure to meet industrial standard Include a sub board which is KID-1000 to support the EMV IC card protocol Decode data on ISO 1, 2 tracks of magnetic stripe card Shutter mechanism When the power is turned on, if a card is inside of ESM-5907 it will be ejected Communication performed by asynchronous or synchronous with interface in IC card 8(16) points of chip-contact pin move down individually and fully contact on chip surface regardless of bend card in accordance with the contact location and transitional contacts location in ISO Card is to be returned automatically in case the pin can not be fully contacted on IC due to contamination. 2. SYSTEM BLOCK DIAGRAM IBM PC/XT/AT/PS2 or Compatibles RS-232-C CARD READER/WRITER IC CARD IC CARD INTERFACE MODULE 2.1. MODEL INFORMATION E S Interface Type M : RS-232C Function Voltage Track Position Option 5 : Read only 5:12V Without Capture 6:12V With Capture 7:24V Without Capture 8:24V With Capture 9 : Customized 0 : Without Magnetic Head 1 : ISO 1 2 : ISO 2 3 : ISO 3 5 : ISO1/ISO2 6 : ISO2/ISO3 8 : ISO1/ISO2/ISO3 0 : Without Shutter 1 : With Mechanical Shutter 2 : With Electronical Shutter 4 : With IC (8pin) + Electronical Shutter 5 : With IC (16pin) + Electronical Shutter 6 : With IC Contact (8pins) 7 : With IC Contact
5 SPECIFICATION A 5 OF ESM-5907 : ISO1/ISO2 & WITH IC contact(8pin) & Mechanical Shutter (8pins)& Mechanical Shutter 8 : With IC Contact (16pin) 9 : With IC Contact (16pins)&Shutter 2.2. RS-232 Connection SG TXD SG TXD CARD READER RXD RXD 3. SPECIFICATION 3.1. Card Standard Magnetic Stripe Card Card Standard ISO 7811 Track ISO 1 Track I (IATA) ISO 2 Track II (ABA) ISO 3Track III (Not Used) Reading Method F2F Card Thickness Plastic : mm IC Card : ISO 7816 PART Environmental Requirement Ambient Temperature - Storage : -20 C ~ 70 C ( No functional error to be found in 12 hours after returning to normal environment. ) - Operating : 5 C ~ 50 C ( In 0 to +5 range, all specifications but ' Warped Card ' to be satisfied. ) Ambient Relative Humidity -Storage : 0 ~ 95% ( No functional error to be found in 12 hours after returning to normal environment. ) - Operating : 0 ~ 90% (No Condensation) Vibration : Amplitude 2 mm within 2G or less,. 10 to 50Hz Hz in X, Y, Z directions for 30 min Shock : 30 G, 11 ms 3.3. Physical Characteristics Dimensions : See Section 9. Dimension drawing Weight : Approximately 1,000 g Power Requirement (1) Input Voltage : 24V DC ± 5% : 5V DC ± 5% ( KID-1000 ) (2) Power Consumption Motor Starting or Reversing : Less than 1.5A (24V DC, 50msec) Card Feeding : Less than 400mA (24V DC)
6 SPECIFICATION A 6 OF (3) Ripple : Less than 200mVp-p (24V DC) Less than 50mVp-p ( 5V DC) (4) Operating Locus : Indoor use only 3.4. Operational Characteristics Feeding Card Speed : 350 mm/sec + 20% Life of a head : Min. 1,000,000cycle (One pass stands for one direction movement in forward and backward ) Mechanism : Belt Timing :700,000 cycle Angle Ring :400,000 cycle Mecha(gear):400,000 cycle 3.5. Error Rate Mag. card : Less than 1/200 Times per each track. Ic card : Less than 1/200 cycles (one cycle : bi-direction movement in forward and backward) 3.6. Jitter Rate Read : Less than 15% per each track of encoded card 3.7. Warped Cards This term refers to an evenly warped card having a height from the top of the convex surface to the base of the warped edge. H = 3.0 mm maximum for card not jamming 2.0 mm maximum for availability to read. 4. INTERFACE REQUIREMENTS 4.1. Physical Constructions RS-232 Connector. (MAIN INTERFACE BOARD, CN1-MOLEX ) RS-232-C PC MSR Input/Output Function Signal Name 25 pin 9 pin CN1 TXD O Transmit Data RXD I Receive Data RTS O Request to Send CTS I Clear to Send SG GND Signal Ground Power and RS-232 Connector. (KID-1000, CN1 : MOLEX ) Signal Name CARD R/W Function (5 pin) TXD 1 Transmit Data RXD 2 Receive Data VCC 3 Supply Voltage IC SW 4 IC CARD S/W GND 5 Signal Ground
7 SPECIFICATION A 7 OF #1 # Power Connector: (MAIN INTERFACE BOARD, CN6 -- MOLEX ) Pin No. Signal Name Function 1 24 V +24 VDC 2 GND Ground 3 GND Frame Ground 4 5V +5V DC (Option) #1 # Ic card Connector: KID-1000, CN3 zip connector Pin No. Signal Name Function 1 GND Ground 2 IC-VCC IC CARD VCC 3 AUX 1 Auxiliary 4 IC-RST IC CARD Reset 5 I/O Input/Output 6 IC-CLK IC CARD Clock 7 AUX 2 Auxiliary 8 AUX 3 Auxiliary #1 # Logical Constructions Transmission Control Specification (1)Type : Asynchronous, Half duplex. (2) Track Select. SW1 SW2 SW3 Track Select OFF OFF ON ISO- 1 OFF ON OFF ISO- 2 ON OFF OFF ISO- 3 ON ON ON ISO- 1,2,3 OFF ON ON ISO- 1,2 ON ON OFF ISO- 2,3 OFF OFF OFF Not use
8 SPECIFICATION A 8 OF (3) Baud Rate : 1200, 2400, 4800, 9600 and ( Dip SW : KSD08H ) SW4 SW5 Baud Rate OFF OFF 2400 OFF ON 4800 ON OFF 9600 (default) ON ON (4) Function Select SW6 SW7 SW8 Function Select OFF OFF OFF Without EMV Func OFF ON ON Use EMV Func ON OFF OFF Program Download (5) Data Length : 8 bits, None parity (6) Start bit : 1 bit (7) Stop bit : 1 bit (8) Character Code : ASCII Transmission Control Method / Response method : CARD READER executes a particular operation according IC CARD R/W executes a particular operation according to the command from Host, and reports the results of the execution to Host(using EMV) Transmission Control Characters STX (02h) Indicate start of text. ETX (03h) Indicate end of text. ENQ (05h) Request to send response. ACK (06h) Send positive response. NAK (15h) Send negative response. Clear the line and reset MSR (10h04h) CR (0Dh) Carriage return Text Configuration (1) / Response S T X E T X B C C C R BCC Range (2) Control Characters A C K C R N A K C R E N Q C R D L E E O T C R
9 SPECIFICATION A 9 OF Note : 1) BCC & CR are omissible according to Fm in INITIALIZE command. 2) Gap between characters is less than 20 msec. 3) BCC does not include STX and calculated by EXCLUSIVE OR in BCC range Data Gap During receiving mode, if 15 msec time-out occurs, CARD Reader assumes that receiving 1 block data is completed Cancel of Whenever receiving ' ( 10h 04h ) ' characters, CARD Reader stops the current execution right away, sends ' ' and waits for the next command. If ' ' is received during the transmission of response, CARD R/W returns to command receive mode after the completion of the transmission. If ' ' is received during the processing of ENTRY, RETRIEVE, or EJECT command, the card is ejected. 5. COMMUNICATION PROTOCOL SEQUENCE 5.1. Regular Operations s ENQ CARD READER ACK Execution Response Cancel of ( ) CARD READER ACK 5.2. Irregular Operations ( Communications Errors ) s 20 msec. Time-out ENQ CARD READER ACK Execution Response
10 SPECIFICATION A 10 OF ENQ Error CARD READER NAK ACK Execution Response ENQ Error CARD READER NAK ACK Execution Response ENQ ENQ Error CARD READER ACK ACK Execution Response ENQ ENQ Error CARD READER ACK Execution Response Response Cancel of command Error CARD READER ACK Error CARD READER ACK
11 SPECIFICATION A 11 OF COMMUNICATION PROTOCOL DESCRIPTIONS 6.1. Format Details Format 'C( 43h )' cm pm Data* *Only for Initialization commands ( cm = 30h ),and IC card direct ( cm = 39h ) See Section 7. for more information Positive Response Format 'P( 50h )' cm pm st1* st0* Data** * Status Code Byte. See Section 6.3 for the status code table. ** Only for Initialization command ( cm = 30h, pm = 31h ), Status Request command ( cm = 31h, pm = 31h ),and Read command ( cm = 36h ), IC card power ( cm = 38h, pm = 31h ), IC card direct ( cm = 39h ) and Get Version (cm = 3Ch ). See Section 7. for more information Negative Response Format 'N( 4Eh )' cm pm e1* e0* * Error Code Byte. See Section 6.4 for the error code table. Note: If e1 = 0 ( 30h ) and e0 = 1 ( 31h ), '01' is the status code and it also applied to the error codes Parameter Code List cm Pm Description* INITIALIZE 30h 30h Initialize CARD Reader and IC CARD R/W and then eject the card if a card is inside CARD Reader 31h Initialize CARD Reader and IC CARD R/W and then capture the card if a card is inside CARD Reader 32h Initialize CARD Reader and IC CARD R/W and then retain the card if a card is inside CARD Reader STATUS 31h 30h Report the presence and the position of a card REQUEST 31h Report the presence and the position of a card in detail ENTRY 32h 30h Accept the magnetic card 32h Accept the IC card EJECT 33h 30h Eject the card to the front 31h Eject ( Capture ) the card to the back MAGNETIC CARD 36h 30h Move card without reading ( for cleaning purpose ) READ 31h Read ISO 1 and transmit data 32h Read ISO 2 and transmit data 35h Read all tracks and transmit data 36h Clear the read buffer memory IC POWER 38h 30h IC power off 31h IC power on (EMV card) IC CARD DIRECT 39h 30h Data transmit to and from the IC card GET VERSION 3Ch 30h Get version RETRY 3Eh 30h Set retry count to 0 31h Set retry count to 1 32h Set retry count to 2 33h Set retry count to 3 34h Set retry count to 4 ( Default ) *See Section 7. for more information
12 SPECIFICATION A 12 OF Error Code List Code '00' unidentified '01' Parameter incorrect '02' cannot be executed '04' data error '05' Time error ( For entry ) '06' Card error ( Irregular ) '10' Card jammed 12 IC card not exist 13 IC card no ATR(without KID-1000) 79 IC card no ATR(with KID-1000) '16' Card position moved '17' Card jammed on retrieve '18' Card jammed on IC card contact '19' IC card communication error '21' Read error - Pre-amble error '22' Read error - Post-amble error '23' Read error - LRC error '24' Read error - Parity error '25' Read error - Blank track '27' Card entry disabled Description 6.4. Status Code List Code Description 00 No Card Detected ( including gate ) 01 Card at gate 02 Card inside CARD Reader ( transport ) 7. COMMUNICATION DETAILS 7.1. INITIALIZE ( cm = 30h ) After power on, CARD Reader needs to be initialized with INITIALIZE command in order to receive commands from, execute them, and send the results. INITIALIZE command initializes the CARD Reader with the parameters provided and sets the CARD Reader to the default settings 'C' 30h Pm 33h* 32h* 34h* 30h* Fm Pd Wv Sh Ds Ty Cp * Mandatory sequence for future use Positive Response 'P' 30h pm st1 st0 Type code* * Only when Ty is set to 31h Negative Response 'N' 30h pm e1 e0 pm: Specifies the ejection of a card inside CARD Reader( Initialization only ) 30h Eject the card to front 31h Eject ( capture ) the card to back
13 SPECIFICATION A 13 OF h Retain the card ( in transport ) Fm: Specifies the command format. CR BCC 30h No No 31h Yes No 32h No Yes 33h Yes Yes Pd: No function. Wv: No function. Sh: Specifies the shutter open/close test when CARD Reader is initialized. 31h Shutter open/close not to be tested. (default 0 ) Ds: No function Ty: Specifies the response format for type recognizing codes. 30h No type recognizing code in the response. 32h Type recognizing codes ( 5 bytes ) in the response. 'P' 30h pm st1 st0 I* II* III* IC** 32h * I for ISO Track 1 and II for ISO Track 2 * Type Recognizing Code '0' N/A '1' Read Only ** Support IC CARD '0' N/A '1' IC card able Cp: No function 30h: Default 7.2. STATUS REQUEST ( cm = 31h ) STATUS REQUEST command is sent to know if a card is inside CARD Reader the position of it. CARD Reader always sends two byte status report( st1 & st0 ) and one or two byte status report ( se2, se1 & se0 ) is added depending on pm 'C' 31h pm Positive Response 'P' 31h pm 30h se1 * pm = 31h only Negative Response 'N' 31h pm e1 e0 pm: Specifies the response format 30h se not included 31h se included Details of se byte: se1 : b7 b3 b2 b1 b0
14 SPECIFICATION A 14 OF b0 PH1 1: Card detected 0: Card not detected b1 PH2 1: Card detected 0: Card not detected b2 PH3 1: Card detected 0: Card not detected b3 PH4 1: Card detected (Option) 0: Card not detected (Option) b7 MSW 1: IC card sensing 0: IC card no detected 7.3. ENTRY ( cm = 32h ) ENTRY command accept the IC card or magnetic card depending on pm. MAGNETIC CARD ENTRY command accepts the magnetic card that meets the conditions set by DISABLE/ENABLE command. By default, CARD Reader checks the width of the card and the magnetic flux on ISO Track II and III. If card staying on shutter and no inserted more response is time error (code "05") 'C' 32h PM Positive Response 'P' 32h Pm st1 st Negative Response 'N' 32h Pm e1 e0 pm: Specifies the entry card 30h magnetic card 32h IC card without communication 7.4. EJECT ( cm = 33h ) EJECT command ejects the card to front or to back depending on pm. When a card is ejected to front, its one end remains in between rollers so that CARD Reader could retrieve it unless the card is removed 'C' 33h Pm Positive Response 'P' 33h pm st1 st Negative Response 'N' 33h pm e1 e0 pm: Specifies the eject direction 30h To front 31h To back ( Capture ) 7.5. RETRIEVE ( cm = 34h ) RETRIEVE command retrieves the ejected card that is not removed. RETRIEVE command does not work after the INITIALIZE-EJECT command. It works only after EJECT command is executed. The difference between ENTRY command and RETRIEVE command is that RETRIEVE command does not wait for a card to be inserted 'C' 34h 30h Positive Response
15 SPECIFICATION A 15 OF 'P' 34h 30h st1 st Negative Response 'N' 34h 30h e1 e MAGNETIC CARD READ ( cm = 36h ) READ command reads the card and sends the data to. STX, ETX, and LRC will not be sent to. Should a read error occur, CARD R/W retries to read the card depending on RETRY count set by RETRY command. In case of a single track read, if a read error happens, a negative response will be sent to, but in case of all track read, a positive response will be sent to with the error code in the place of corresponding track data 'C' 36h pm Positive Response for one track read for all track read 'P' 36h pm st1 st0 Data 1 00h Data 2 00h Data 3 Each data of between track and track is distinguish as Negative Response 'N' 36h pm e1 e0 pm: Specifies the track to read. 30h Card movement only ( for cleaning purpose ) 31h Read ISO 1 32h Read ISO 2 33h Read ISO 3 35h Read All Track 36h Clear the read buffer memory Notes : If it is not supported track for each model response is code "02" ex) KSM-5751 ( Usable ISO 1, 2 / Not supported ISO 3 ) pm "33h" N6302 ( Negative response : cannot be executed ) Error Code for All Track Read Code Description E1h Pre-amble error E2h Post-amble error E3h LRC error E4h Parity error E5h Blank track 7.7. IC POWER ( cm = 38h ) IC POWER command is for power on/off to communicate with the IC card 'C' 38h pm Positive Response 'P' 38h *pm st1 st0 Data* * When EMV card is inserted, pm is set to 31h ( Hexa value ) * When ME2000,STARCOS T0 card is inserted, pm is set to 32h (Hexa value)
16 SPECIFICATION A 16 OF Negative Response 'N' 38h pm e1 e0 pm: Specifies the IC power on/off 30h IC power off 31h IC power on 32h SEL card power 7.8. IC CARD DIRECT ( cm = 39h ) IC CARD DIRECT command is for communication with the IC card, and it is available after executing IC POWER ON 'C' 39h 30h Data* * Hexa value ( 2 X n bytes ) Positive Response 'P' 39h Pm st1 st1 Data* * Hexa value Negative Response N 39h Pm e1 e0 pm: specify the commands 30h Communicate with IC Card 7.9. GET VERSION ( cm = 3Ch ) 'C' 3Ch 30h Positive Response 'P' 3Ch 30h st1 st0 Data Negative Response 'N' 3Ch 30h e1 e0
17 SPECIFICATION A 17 OF DIMENSION < KID-1000 DIMENSION >
18 SPECIFICATION A 18 OF < WITH ELECTRONICAL SHUTTER, KID-1000 & CAPTURE MODEL (OPTION) >
19 SPECIFICATION A 19 OF < WITH MACHANICAL SHUTTER & WITH CAPTURE MODEL >
KYTronics Corp.,Ltd KYT-22XX SPECIFICATIONS B 1 OF kytronics.co.kr. 3 rd Floor, A-Dong, Twin Town-Bldg,
SPECIFICATIONS B 1 OF 18 2007. 04. 20. KYT-22XX KYTronics Corp.,Ltd 3 rd Floor, A-Dong, Twin Town-Bldg, 703-2. Gojan-Dong, AnSan-City, Kyung Ki-Do, Korea(Zip : 425-906) Tel : 82 31 485 9480 Fax : 82-31
More informationCompact Card Dispenser
9100-0140 SPECIFICATIONS A 1 OF 17 2009. 01. 19. Compact Card Dispenser WITH Capture Function integrated KYTronics Corp.,Ltd 3 rd Floor, A-Dong, Twin Town-Bldg, 703-2. Gojan-Dong, Danwon-Gu, Ansan-City,
More informationCard Issuing Machine for Magnetic, Contact & IC Card
SPECIFICATION A 1 OF 44 2003. 12.. Card Issuing Machine for Magnetic, Contact & IC Card B & C Data Systems Tel : 541-601-8282 Fax : 541-878-8110 E-mail : sales@bcdata.com http://www. bcdata.com SPECIFICATION
More informationAPPROVAL SHEET. : Slim Motor Driven Magnetic & IC Card Reader : TTM-M610S-D0. CUSTOMER : Description MODEL NO. SUPPLIER CUSTOMER
DATE : JUL. 25 TH, 2014 APPROVAL SHEET CUSTOMER : Description MODEL NO. : Slim Motor Driven Magnetic & IC Card Reader : TTM-M610S-D0 SUPPLIER DRAWER CHECKED APPROVED 2014... 2014... 2014... CUSTOMER APPROVED
More informationCompact Card Dispenser
SPECIFICATIONS A 1 OF 17 2008. 11. 18. Compact Card Dispenser WITH Capture Function integrated SPECIFICATIONS A 2 OF 17 2008. 11. 18. REVISION HISTORY CHECK DATE DESCRIPTION REV. PAGE 1 2008. 11. 18 First
More informationCard Issuing Machine for IC Card
SPECIFICATION X1 1 OF 40 2006. 05.. Card Issuing Machine for IC Card KYTronics Corp.,Ltd 3 rd Floor, A-Dong, Twins Town-Bldg, 703-2. Gojan-Dong, AnSan-City, Kyung Ki-Do, Korea Tel : 82 31 485 9480 Fax
More informationMANUAL SWIPE MAGNETIC CARD READER/WRITER
Card Reader/Writer Page 1/10 WBT-2000 SERIES MANUAL SWIPE MAGNETIC CARD READER/WRITER Vision 2.0 Card Reader/Writer Page 2/10 CONTENTS 1. INTRODUCTION... 3 2. BASIC... 3 3.... 3 3.1 Format... 3 3.2 Environmental
More informationOrdering Information. Versatile Reader/Writer Reliably Handles Read Function for Magnetic Cards or Read/Write Function for IC Cards
Motor Driven Card Reader Versatile Reader/Writer Reliably Handles Read Function for Magnetic Cards or Read/Write Function for IC Cards Compact size and light weight allow easy installation in any terminal
More informationCard Issuing Station For Magnetic, Contact & IC Card
91000090 SPECIFICATION B 1 OF 56 2007. 10. 01. Card Issuing Station For Magnetic, Contact & IC Card KYTronics Corp.,Ltd 3 rd Floor, A-Dong, Twin Town-Bldg, 703-2. Gojan-Dong, AnSan-City, Kyung Ki-Do, Korea
More informationCard Dispensing/Collecting Machine
A 1 OF 36 2010. 03. 02. Card Dispensing/Collecting Machine Series. 3,,. http://www.securetech-corp.com E-mail : sales@securetech-corp.com A 2 OF 36 2010. 03. 02. REVISION HISTORY No DATE DESCRIPTION REV
More informationMANUAL SWIPE MAGNETIC CARD IC CARD READER/WRITER CONTENTS. 1. INTRODUCTION...Error! Bookmark not defined.
MANUAL SWIPE MAGNETIC CARD IC CARD READER/WRITER CONTENTS 1. INTRODUCTION...Error! Bookmark not defined. 2. BASIC SPECIFICATION...Error! Bookmark not defined. 3. SPECIFICATION...Error! Bookmark not defined.
More informationManual Swipe Magnetic Card Reader
R Manual Swipe Magnetic Card Reader Peripheral-type, Compact, Manually Operated Card Reader H Connects to the PC RS-232C port just like any other peripheral H Sits conveniently next to the PC keyboard
More informationCONFIGURATION: The Reader, LED Indicator, pin numbers for the 9-pin connector and the 25-pin adapter are shown in Figure 1-2.
FEATURES: Major features of the Swipe Reader are as follows: Powered through the USB port no external power supply required Hardware Compatible with PC or any computer or terminal with an RS-232 interface
More informationMotor Driven Card Reader/Writer
Motor Driven Card Reader/Writer 3S4YR-MM, MZ Reliable Reader/Writer Handles Magnetic Cards Single, triple, or center track read/write capability Compact size and light weight ease installation in any terminal
More informationTABLE OF CONTENTS. Communication Functions
TABLE OF CONTENTS Chapter 1: Chapter 2: Chapter 3: Chapter 4: General Features....................................................... 1-1 Functions......................................................
More informationMODEL : RS2000 TECHNICAL MANUAL
MODEL : RS2000 PORT POWERED RS232 SWIPE READER TECHNICAL MANUAL May, 2000 I FCC This Equipment, RS2000, had been tested and found to comply with the limits for a Class A digital device, pursuant to part
More informationFEC-240G. Rev. Date
Model User s Manual Contents Contents. 1 Features... 2 Type Model and Serial Number... 2 Specifications... 3 Interface Connections...... 4 DIP Switch Setting... 6 Dimension... 7 Command Set Table... 8
More informationCard Issuing Machine for Magnetic, Contact & IC Card
SPECIFICATION L 1 OF 68 2006. 10. 31. Card Issuing Machine for Magnetic, Contact & IC Card SPECIFICATION L 2 OF 68 2006. 10. 31. REVISION HISTORY No DATE DESCRIPTION REV PAGE F/W Name 1 2001.01.. Ver 2.00
More informationKSH-3000-M. Swipe Card Reader
KSH-3000-M Swipe Card Reader ( Magnetic Reader Only ) Version: V2.7 Revision Reason Date V2.0 03-16-2006 V2.1 1. Update mechanical drawing 04-09-2006 V2.2 1. Update KSH-3000-M-061 drawing 05-03-2006 V2.3
More informationAddmaster Corporation
IJ-1000 Ink-Jet Validation Printer Specification Addmaster Corporation Address: 225 East Huntington Drive Monrovia, CA 91016 Web: www.addmaster.com Phone: (626) 358-2395 FAX: (626) 358-2784 Document: ij1w.doc
More informationManual Swipe Card Reader
Manual Swipe Card Reader Low Power, Compact, Manually Operated Card Reader Low-power CMOS technology Lightweight and compact size Stable operation with card swipe speed within a range of 10 to 120 cm/second
More informationRF Card Issuing Machine with
B 1 OF 44 2008. 11. 26. RF Card Issuing Machine with Thermal Rewritable Printer Securetech Peripherals Inc B 2 OF 44 2008. 11. 26. REVISION HISTORY No DATE DESCRIPTION REV PAGE F/W Name 1 2008.10.. First
More informationREV: PAGE: REVISION DESCRIPTION APPR: DATE: B - Released as a standard product. GRW 11/05/96
PAGE: REVISION DESCRIPTION APPR: DATE: B - Released as a standard product. GRW 11/05/96 B.1 5, 11 7 Removed reference to R5-C9 reset circuit in SYSTEM BLOCK DIAGRAM and RESET sections since components
More informationSPECIFICATION for MAGNETIC CARD READER BUILT IN RS232. Model # ZU-1870MA8R. Revision 1.00 JUL 2004
Specification No.:MIS-DG60B121 SPECIFICATION for MAGNETIC CARD READER BUILT IN RS232 Model # ZU-1870MA8R Revision 1.00 JUL 2004 Matsushita Electrical Industrial Co., Ltd. Matsushita Industrial Information
More informationMOBILE THERMAL PRINTER
MOBILE THERMAL PRINTER MODEL CMP-20 series Technical Manual Rev. 1.00 TABLE OF CONTENTS 1. General Specifications 1.1 Printing Specifications 1.2 Character Specifications 1.3 Paper Specification 1.4 Printable
More informationMagnetic Stripe Card Reader and Reader/ Writer Unit MCR, MTM & MSA SERIES
Magnetic Stripe Card Reader and Reader/ Writer Unit MCR, MTM & MSA SERIES 1 MTM Motor Driven Reader Series MTM-590-3R-0101 MTM-590-3R-0102 MTM - 570 Series General Specification Card Speed DC12V5 Max.
More informationSPECIFICATION FOR MAGNETIC CARD READER. ( Manual type ) MODEL Z U - 9 A 3 6 B 1 1 JUL MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD.
SPECIFICATION FOR MAGNETIC CARD READER ( Manual type ) MODEL Z U - 9 A 3 6 B 1 1 JUL. 2004 Date : Signature for approval Read and agreed by MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. MATSUSHITA INDUSTRIAL
More informationFixed mount CCD bar code reader NFT Specification Ver. 1.0
Fixed mount CCD bar code reader NFT-2100 Specification Ver. 1.0 Version Control number : Model : SS05011 NFT-2100 Version Date Revisions Description Ver 1.0 2005/06/09 - First registration 1. About this
More informationMODEL : TRP-100-II Receipt Printer User s Manual
MODEL : TRP-100-II Receipt Printer User s Manual All specifications are subject to change without notice Table of Contents 1. Parts Identifications 3 2. Setting up the printer 4 2.1 Unpacking 4 2.2 Connecting
More informationKSH-6000 Manual Card Reader Three In One Insertion Hybrid Card Reader Specification Version: V1.1
KSH-6000 Manual Card Reader Three In One Insertion Hybrid Card Reader Specification Version: V1.1 This datasheet contains new product information. we reserves the rights to modify the product specification
More informationSPECIFICATION. Motor Card Reader CONTENT. 2. Model Specification Structure and Dimensional Drawing Card Type 6
Page 2/10 CONTENT 1. General View. 3 2. Model Specification 3 3. Structure and Card Stop Position.. 4 4. Structure and Dimensional Drawing 5 5. Card Type 6 6. Operation Environment «7 7. Operation Mode,
More informationMotor Driven Card Reader/Writer
Motor Driven Card Reader/Writer 3S4YR-MKW, MKF, MKS Versatile Hybrid Reader/Writer Handles oth Magnetic and IC Cards Durable 4-wheel, 2-belt drive with roller accommodates discrepancies in card thickness
More informationDate: Signatureforapproval Read and agreed by MIS-DG60C153B FOR Z U S EA AUG MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD.
SPECIFICATION FOR IC CARD READER (Electric lock type) MODEL Z U - 9 8 3 3 0 S EA AUG. 2004 Date: Signatureforapproval Read and agreed by MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. MATSUSHITA INDUSTRIAL INFORMATION
More informationTHT-500-A/R (C5) 1. System Configuration COMMUNICATION INSTRUCTION MANUAL. No. THT5CE
COMMUNICATION INSTRUCTION MANUAL THT-500-A/R (C5) No. THT5CE2 2018.04 This manual contains instructions for communication functions of the THT-500-A/R. 1. System Configuration 1.1 When Using USB Communication
More informationSPECIFICATIONS ZU 1870MU. Panasonic Communications Co.,Ltd. Devices and Components Company. Manual Insertion Type Magnetic Card Reader NOTE: APPROVAL
SPECIFICATIONS Manual Insertion Type Magnetic Card Reader ZU 1870MU NOTE: APPROVAL Panasonic Communications Co.,Ltd. Devices and Components Company 2111 Ueda, Usa City, Oita 879-0493, JAPAN REF No. MIS-DG60B136
More informationModel: Z1DA-78A. 3.5 Micro Floppy Disk Drive. Specification
Model: Z1DA-78A 3.5 Micro Floppy Disk Drive Specification Citizen Systems Europe Park House, 643 651 Staines Road, Feltham. TW14 8PA. Tel: +44 20 8893 1900 www.citizen.co.uk Table of Contents TABLE OF
More informationMODEL : PR-T25 Receipt Printer User s Manual
MODEL : PR-T25 Receipt Printer User s Manual All specifications are subject to change without notice Table of Contents 1. Parts Identifications 1. Parts Identifications 3 2. Setting up the printer 4 2.1
More informationMODEL : LK-T210 Receipt Printer User s Manual
SEWOO TECH CO.,LTD. Doosung BD, 689-20, Geumjeong-dong, Gunpo-si, Gyeonggi-do, 435-862, Korea TEL : +82-31-459-8200 FAX : +82-31-459-8880 www.miniprinter.com MODEL : LK-T210 Receipt Printer User s Manual
More informationX1DE-31U USB 3.5" Micro Floppy Disk Drive
USB 3.5" Micro Floppy Disk Drive Features Introduction This material provides the information necessary to interface the X1 series micro floppy disk drives to floppy disk controllers, and provides all
More informationMODEL : LK-T200 Receipt Printer User s Manual
SEWOO TECH CO.,LTD. Doosung BD, 689-20, Geumjeong-dong, Gunpo-si, Gyeonggi-do, 435-862, Korea TEL : +82-31-459-8200 FAX : +82-31-459-8880 www.miniprinter.com MODEL : LK-T200 Receipt Printer User s Manual
More informationMSR120. Magnetic Stripe Card Reader Universal Serial Bus (USB) Interface. Programmer s Manual
MSR120 Magnetic Stripe Card Reader Universal Serial Bus (USB) Interface Programmer s Manual Document PM010 Revision 1.1 09 Feb. 2001 Notice, Agency Approved, Warning, Warranty, and Preface 2003/1/21 NOTICE
More informationMODEL : SLK-T12EB Receipt Printer User s Manual
J. STEPHEN Lab., Ltd. 28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi-do, 447-210 Republic of Korea TEL : +82-31-8077-5000 FAX : +82-31-459-8880 www.miniprinter.com MODEL : SLK-T12EB Receipt Printer User
More informationTHERMO-CON. Model No. HECR002-A5. Keep available whenever necessary.
HEC-OM-S008 Aug.2014 Communication Manual THERMO-CON Model No. HECR002-A5 Keep available whenever necessary. This manual is copyrighted and all rights are reserved by SMC Corporation, and may not, in whole
More informationMounting Dimensions / Viewing 2 Mounting Options 3. Wiring Configuration 4. Quick Set up Procedure 5. Changing Intensity 6.
Section Mounting Dimensions / Viewing 2 Mounting Options 3 Section 2 Wiring Configuration 4 Section 3 Quick Set up Procedure 5 Section 4 Changing Intensity 6 Section 5 Option Summary 7 Section 6 Option
More informationMODEL : LK-TL200 Receipt Printer User s Manual
SEWOO TECH CO.,LTD. 28-6, Gajangsaneopdong-ro, Osan-si, Gyeongi-do, 447-210, Korea TEL : +82-31-459-8200 FAX : +82-31-459-8880 www.miniprinter.com MODEL : LK-TL200 Receipt Printer User s Manual TL200 Rev.
More informationMODEL : TRP100-III Receipt Printer User s Manual
MODEL : TRP100-III Receipt Printer User s Manual All specifications are subject to change without notice A software tool is available to configure the printer settings on AURES technical website: www.aures-support.fr
More informationUnique Micro Design First Choice of Professional Systems Intergrators. Model 361 Terminal Keyboard Wedge User Manual
Model 361 User Manual Unique Micro Design First Choice of Professional Systems Intergrators Model 361 Terminal Keyboard Wedge User Manual Document Reference : DOC-M361-UM UMD Part Number : 6-0361-993-5
More informationMEC-COM-M134. User s Manual
MEC-COM-M134 Mini PCI-e 4-port RS-232/422/485 serial board with power input User s Manual Third Edition, February 2014 Mini PCI-e Serial Card User s Manual 2 Table of Contents Chapter 1 Introduction 4
More informationSender Receiver Sender
EEE 410 Microprocessors I Spring 04/05 Lecture Notes # 19 Outline of the Lecture Interfacing the Serial Port Basics of Serial Communication Asynchronous Data Communication and Data Framing RS232 and other
More informationMobile POS Thermal printer
PK109 Mobile POS Thermal printer MEGADATA INDUSTRIAL, Inc. 1F, NO.10, Lane 58, Ta Chuan Street, TAICHUNG, TAIWAN R.O.C. TEL: +886-4-2376-6881 FAX: +886-4-2371-7974 www.posjet.com.tw megadata@ms21.hinet.net
More informationRS485 INSTRUCTION MANUAL. DM4500 Series. Page 1 of 6
RS485 INSTRUCTION MANUAL DM4500 Series Page 1 of 6 INDEX 1.1. RS485 OUTPUT...3 1.1.1. Introduction... 1.1.2. RS output menu diagram... Page 2 of 6 1.1 RS4 OUTPUT 1.1.1 Introduction The RS485 output option
More informationMODEL : SLK-TL100 Receipt Printer User s Manual
J. STEPHEN Lab., Ltd. 28-6, Gajangsaneopdong-ro, Osan-si, Gyeongi-do, 447-210, Korea TEL : +82-31-459-8200 FAX : +82-31-459-8880 www.miniprinter.com MODEL : SLK-TL100 Receipt Printer User s Manual TL100
More informationMODEL : SLK-TE20X Series Receipt Printer User s Manual
MODEL : SLK-TE20X Series Receipt Printer User s Manual TE20X Series Rev.F 03/16 All specifications are subject to change without notice Table of Contents 1. Parts Identifications 1. Parts Identifications
More informationDesktop Reader and Wall Reader Adaptor USER MANUAL DOCUMENT REVISIONS
Desktop Reader and Wall Reader Adaptor USER MANUAL Version: 2.31 Distribution: SALTO customers DOCUMENT REVISIONS Version Date Modifications 1.2 5/03/2004 1.3 11/03/2004 Note on Wall Reader Adaptor about
More informationRS-422 Code-Operated Switches
JUNE 2000 SW421A-R2 SW422A-R2 RS-422 Code-Operated Switches COS/4 TEXT TRANSPARENT GRAPHICS MODE RESET ST LO CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight
More informationCustomer Pole Display. Model: WD-304 Version: 1.12
Customer Pole Display Model: WD-304 Version: 1.12 INDEX 1 FEATURES... 3 2 GENERAL SPECIFICATIONS... 4 3 UNPACKING... 5 3.1 PARTS LIST (WITH BASE PCB)... 5 3.2 PARTS LIST (WITHOUT BASE PCB)... 6 4 CONFIGURATION...
More informationHEAVY DUTY INCLINOMETER ANALOG & RS232 INTERFACE
The Heavy Duty inclinometers are robust inclination sensors specially designed for applications involving rough handling and exposure to rigorous conditions. The die cast aluminium housing and the metal
More informationMaximum Value for OEMs SM. NX70 Serial Communications Unit (SCU) User Manual
Maximum Value for OEMs SM NX7 Serial Communications Unit (SCU) User Manual Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment.
More informationsolartron digital readout model no. DR600 DR700 installation manual
solartron digital readout installation manual model no. DR600 DR700 1.0: Index Section Title Page 1.0 Index.....................1 2.0 Safety Summary............2 3.0 Service & Repair............4 4.0 Measurement
More informationFEC-80T Receipt Printer User s Manual
FEC-80T Receipt Printer User s Manual All specifications are subject to change without notice TABLE OF CONTENTS 1. Parts Identifications 3 2. Setting up the printer 4 2.1 Unpacking 4 2.2 Connecting the
More informationMODEL : AP-8220 U Receipt Printer User s Manual
MODEL : AP-8220 U Receipt Printer User s Manual AP-8220 U Rev.A 10/14 All specifications are subject to change without notice Table of Contents 1. Parts Identifications 1. Parts Identifications 3 2. Setting
More informationTRW SERIAL TYPE Q RFID TRANSPONDER TECHNOLOGY DOC. 115-R6 PCB - BOX
RFID TRANSPONDER TECHNOLOGY DOC. 115-R6 TRW SERIAL TYPE Q PCB BOX 1.0 FEATURES AND SPECIFICATIONS The TRW is a Front Side Serial Tag Reader/Writer with built-in Antenna. INTERFACE OPTIONS: TTL - RS232
More informationUSER MANUAL. MODEL 2011 High Speed Asynchronous to Synchronous Converter
USER MANUAL MODEL 011 High Speed Asynchronous to Synchronous Converter Part# 07M011-A Doc# 0601UA Revised 03/16/94 SALES ICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www.patton.com 1.0 WARRANTY
More informationMessage Display Operator Panel. UCT-33/36 Industrial Terminal. Manual 32.00
BRODERSEN Message Displays/Operator Panels Message Display Operator Panel UCT-33/36 Industrial Terminal Manual 32.00 Brodersen Controls A/S. Betonvej 0. DK-4000 Roskilde. Denmark. Tel (+45) 46 74 00 00.
More informationDS-800. ::: Receipt Printer User s manual :::
DS-800 ::: Receipt Printer User s manual ::: All specifications are subjected to change without notice TABLE OF CONTENTS 1. Parts Identifications 2 2. Setting up the printer 3 2.1 Unpacking 3 2.2 Connecting
More informationXR-200 MINI DOT IMPACT PRINTER PRODUCT SPECIFICATION DATE : MAY 3, 2004 MANUAL REVISION 2.0
XR-200 MINI DOT IMPACT PRINTER PRODUCT SPECIFICATI DATE : MAY 3, 2004 MANUAL REVISI 2.0 Features Dip Switch Configuration Emulation mode, communications mode, baud rate, serial/parallel handshake, and
More informationThe modems are made in industrial 108mm wide aluminium housing for DIN rail mounting. UCM RS232 interface
DESCRIPTION The modems are a series of general-purpose industrial modems, which can be used for data communication through Public Switched Telephone Networks (PSTN). The modems can operate in 2-wire, full-duplex,
More informationMSR120. Programmer s Manual
MSR120 Magnetic Stripe Card Reader Universal Serial Bus (USB) Interface Programmer s Manual UIC EC/DC Document PM009 Revision C 05 Jun. 2002 Originator: Tammy Wang Document Owner: EC/DC Taiwan, Factory
More informationE Serial Controller
SmartSet Technical Reference Manual Addendum for the E281-2310 Controller 1 E281-2310 Serial Controller The following figure shows the mounting dimensions, jumper locations, and connections for the IntelliTouch
More informationTRP-100 Receipt Printer User s Manual
TRP-100 Receipt Printer User s Manual All specifications are subject to change without notice TABLE OF CONTENTS 1. Parts Identifications 3 2. Setting up the printer 4 2.1 Unpacking 4 2.2 Connecting the
More informationREV: PAGE: REVISION DESCRIPTION APPR: DATE: A ALL Released to production GRW 6/17/94
PAGE: REVISION DESCRIPTION APPR: DATE: A ALL Released to production GRW 6/17/94 B 5 Maximum component height was 10.5mm; Removed through hole crystal note and dimension; GRW 3/23/95 Released to production
More informationLeuze electronic. Dimensioned drawing. Electrical connection. Accessories
2D-code hand-held scanner Dimensioned drawing 4-14 V DC We reserve the right to make changes BP_IT4600_4800_GB.fm Part No. 501 06667! Hand-held scanner for Data-Matrix Codes and Bar Codes! Large reading
More informationThe Wireless Connectivity Expert
The Wireless Connectivity Expert 48511 Warm Springs Blvd., Suite 206, Fremont CA 94539 Tel: (510) 490-8024 Fax: (510) 623-7268 Website: http://www.actisys.com/ E-mail: irda-info@actisys.com ACT-IR100SD
More informationVacuum Fluorescent Customer Display. Model: WD-2030 XXXX Version: 1.10
Vacuum Fluorescent Customer Display Model: WD-2030 XXXX Version: 1.10 INDEX 1. FEATURES... 3 2. GENERAL SPECIFICATIONS... 4 3. UNPACKING AND CHECKING THE PARTS... 5 3.1 PARTS LIST (WITH BASE PCB)... 5
More informationVorne Industries. Model 77/232 Serial Input Numeric 3" Display User's Manual
Vorne Industries Model 77/232 Serial Input Numeric 3" Display User's Manual 1445 Industrial Drive Itasca, IL 60143-1849 (630) 875-3600 Telefax (630) 875-3609 Page 2 Model 77/232 Serial Input Numeric 3"
More informationDigilab 2 Reference Manual
125 SE High Street Pullman, WA 99163 (509) 334 6306 (Voice and Fax) www.digilentinc.com PRELIMINARY Digilab 2 Reference Manual Revision: November 19, 2001 Overview The Digilab 2 (D2) development board
More informationADDMASTER. Addmaster Corporation. IJ-3080 Journal/Validation Printer. Specification. IJ-3080 Specification
IJ-3080 Journal/Validation Printer Specification Provides the electrical, mechanical, and interface specifications of the IJ-3080 Journal/Validation Printer. Cover Models: IJ-3080 The Addmaster Model IJ-3080
More informationMODEL : SLK-TS400EB. Receipt Printer User s Manual. TS400EB Rev. B 07/16. All specifications are subject to change without notice
MODEL : SLK-TS400EB Receipt Printer User s Manual TS400EB Rev. B 07/16 All specifications are subject to change without notice Table of Contents 1. Parts Identifications 1. Parts Identifications 3 2.
More informationLow-Power-Radio Transceiver IC
Addressed Mode With Acknowledge Broadcast Mode Automatic Retry Serial Interface Stand Alone Operation Achieves Maximum Range From RF Modules Flow Control Option Two Telemetry I/O Lines (addressed mode
More informationINSTRUCTION MANUAL FOR GCS-300 COMMUNICATION [OPTION CODE: C5] GCSC3E
INSTRUCTION MANUAL FOR COMMUNICATION [OPTION CODE C5] GCSC3E1 2002.04 To prevent the accidents by mishandling of this controller, please arrange to give this manual into the hands of the operator who actually
More informationAD-8923-BCD. Remote Controller (BCD) INSTRUCTION MANUAL 1WMPD
AD-8923-BCD Remote Controller (BCD) INSTRUCTION MANUAL 1WMPD4002137 2010 A&D Company, Limited. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated
More informationC-MAX CME8000-BUS. Module Layout CME8000-BUS-LP02 RS232. Industrial Module with CME8000 receiver IC. Short Description
Industrial Module with CME8000 receiver IC RF Technology Specialist Short Description The CME8000 is a BiCMOS integrated straight through receiver with build in very high sensitivity and a pre-decoding
More informationFRW 13.56MHz - ISO15693 READER/WRITER
Ek20 RFID TRANSPONDER TECHNOLOGY DOC. 147-R4 FRW 13.56MHz - ISO15693 READER/WRITER FRW-PCB FRW-ONDA FRW-SHELL FRW-BOX FRW-USBN FRW-POCKET USBN 1.0 FEATURES AND SPECIFICATIONS The FRW is a Front Side Serial
More informationSCB-C08 USB to RS232/422/485 Converter
SCB-C08 USB to RS232/422/485 Converter USB Interface RS-232 signal RS-422 signal: RS-485 signal: Cable Type Transmission distance Signal LED Direct power from USB port Power consumption: Compliant with
More informationGeneral Specifications
General Specifications GS 48D50Z00-00E-N C0-950-00 Basic Communication System ProSafe-COM A major part of this functionality is mapped upon an industrial PC, thus representing ProSafe- COM. The basic hardware
More informationAceprox FSK Proximity Reader REV2 Data Sheet
Aceprox 688-52 FSK Proximity Reader REV2 Data Sheet Overview The 688-52 OEM proximity reader consists of three parts: a potted unit containing the electronics, a front cover, and an optional spacer plate.
More informationThe ICP 300 is an ultra-compact, lightweight portable thermal printer with an easy-load paper feature.
THERMAL PRINTER Applications Datasheet Features Easy-Load paper feature RS232 Interface 10-35VDC Power Supply requirement High speed, high resolution printing capability Quiet, non-impact system Maintenance-free
More informationINSTRUCTION MANUAL SERIES
INSTRUCTION MANUAL SERIES 1300 ( single board ) Appendix E complement for interactive software Rue du Puits-Godet 16 CH-2005 NEUCHATEL SA Phone:++41 (0)32 729 93 60 Fax: ++41 (0)32 724 10 23 Mail : info@irtsa.com
More informationTRP-C08. USB to RS232/422/485 Isolated Converter. User s Manual. Printed Sep.2014 Rev 1.4
TRP-C08 USB to RS232/422/485 Isolated Converter User s Manual Printed Sep.2014 Rev 1.4 Trycom Technology Co.,Ltd No.35, Zhongxing Rd., Guishan Township, Taoyuan County 333, Taiwan. Tel : 886-3-350-3351
More informationPD1100 STAND-ALONE PROGRAMMING & USER S GUIDE. use the freedom
PD1100 STAND-ALONE ALPHANUMERIC POLE DISPLAY PROGRAMMING & USER S GUIDE use the freedom Forward The information contained in this user s guide is subject to change without notice. This Programming and
More informationInstallation and Operation Manual. Ethernet Interface for SIMREX Radio Modems. SIMREX P/N: MAN.UBRIDGE Rev. B APRIL 2005
Installation and Operation Manual SIMREX Corporation ubridge Ethernet Interface for SIMREX Radio Modems SIMREX P/N: MAN.UBRIDGE Rev. B APRIL 2005 SIMREX CORPORATION Your Trusted Wireless Solution Provider
More informationSingle-Axis Counter BDD 611
Single-Axis Counter BDD 611 Technical Description, User's Guide english No. 611-150 D/E. Edition 0705; Subject to modification. Replaces edition 0701. www.balluff.com Balluff GmbH Schurwaldstrasse 9 73765
More informationCipher 1023 Magnetic Stripe Reader Installation and User's Guide. Document Number : Released Date : Dec 2, 1996
Cipher 1023 Magnetic Stripe Reader Installation and User's Guide Document Number : 1023-001-03 Released Date : Dec 2, 1996 WARNING Note: This equipment has been tested and found to comply with the limits
More informationPK2200 Series. Features. C-Programmable Controller. Specifications Board Size Enclosure Size Operating Temp.
C-Programmable Controller P00 Series The P00 Series of C-programmable controllers is based on the Zilog Z80 microprocessor. The P00 includes digital, serial, and high-current switching interfaces. The
More informationOPERATION MANUAL Card Reader Communication
KC-0001-06-SI 2001-Apr.-2 OPERATION MANUAL Card Reader Communication Protocol SCR-9xxF 9xxF-xR xr-xxxx xxxx NEURON Corporation Copying is prohibited without NEURON Corporation s permission This specification
More informationTMP3200/090 DATASHEET
TMP3200/090 Marking System General Arrangement System Overview The TMP3200/090 marking system permanently prints messages into a variety of materials such as steel, aluminum, and plastic. A hardened pin
More informationLT900SERIES. 1xN Multi-Channel Switch Operation Manual. For RS-232 Control with 16-pin Connector
LT900SERIES 1xN Multi-Channel Switch Operation Manual For RS-232 Control with 16-pin Connector Table of Contents General Information.. 1 General Specifications...... 2 Interface Connectors..... 3 RS232
More informationDSP860 Operation Manual
DSP860 Operation Manual 1. Information 2. Introduction 3. Installation 4. Pin Assignment 5. DIP Switch Setting 6. Character Tables 7. Software Control (Command List) 8. Specifications 9. Instruction of
More informationGeneral. Copyright 2013 EXSEN Company. All Rights Reserved. Rev /5/2013 Page 1 of 6
General World smallest and economic solid state electrochemical CO 2 sensor has been developed for the production. It holds many patents in the structure and the materials of the sensor as well as the
More informationDSP840 Operation Manual Version 3.0
DSP840 Operation Manual Version 3.0 1. Information 2. Introduction 3. Installation 4. Pin Assignment 5. DIP Switch Setting 6. Character Tables 7. Software Control (Command List) 8. Specifications 9. Instruction
More information