Enclosed Power Supplies

Transcription

1 , Watt Features Very compact metal cased power supplies High operating temperature up to 70 C Low no load power consumption <0.5W up to 75 W units Screw terminal block No internal fan up to 150 W models Universal input AC input, full range Withstand 300 VAC surge input for 5 sec. Adjustable output voltage 3-year product warranty The TRACOPOWER TXM series is a family of encased power supplies designed for a wide range of cost critical applications. With a low profile metal case and screw terminal block connection, they are easy to install in any equipment. There are 40 models with single output voltages from 3.3 VDC to 48 VDC in 9 power ranges from 15 W to 150 W. These power supplies have universal input and comply with European EMC standards and the Low Voltage Directive (LVD). Models with Single Output Order Code Output Power max. Output Voltage Efficiency Output Current max. nominal adjustable 115 VAC 230 VAC TXM VDC VDC 4.0 A 70 % 71 % TXM VDC VDC 3.0 A 76 % 78 % TXM Watt 12 VDC VDC 1.3 A 80 % 82 % TXM VDC VDC 1.0 A 82 % 83 % TXM VDC VDC 0.7 A 84 % 85 % TXM VDC VDC 5.0 A 70 % 71 % TXM VDC VDC 5.0 A 76 % 78 % TXM Watt 12 VDC VDC 2.1 A 80 % 82 % TXM VDC VDC 1.6 A 82 % 83 % TXM VDC VDC 1.1 A 84 % 85 % TXM VDC VDC 6.0 A 79 % 80 % TXM VDC VDC 3.0 A 83 % 84 % TXM Watt 15 VDC VDC 2.4 A 85 % 86 % TXM VDC VDC 1.5 A 86 % 87 % TXM VDC VDC 0.75 A 87 % 88 % TXM VDC VDC 8.0 A 79 % 80 % TXM VDC VDC 4.2 A 84 % 85 % TXM / 60 Watt 15 VDC VDC 3.4 A 85 % 86 % TXM VDC VDC 2.2 A 87 % 88 % TXM VDC VDC 1.1 A 88 % 89 % Page 1 of 6

2 Models with Single Output Order Code Output Power max. Output Voltage nom. Output Current max. Efficiency nominal adjustable 115 VAC 230 VAC 115 VAC 230 VAC TXM VDC VDC 12.0 A 79 % 80 % TXM VDC VDC 6.0 A 84 % 85 % TXM / 75 Watt 15 VDC VDC 5.0 A 85 % 86 % TXM VDC VDC 3.2 A 86 % 88 % TXM VDC VDC 1.6 A 88 % 89 % TXM VDC VDC 20.0 A 84 % TXM VDC VDC 8.5 A 86 % 88 % TXM Watt 15 VDC VDC 7.0 A 86 % 88 % TXM VDC VDC 4.5 A 86 % 88 % TXM VDC VDC 2.2 A 86 % 88 % TXM VDC VDC 12.5 A 86 % TXM VDC VDC 10.0 A 87 % 150 Watt TXM VDC VDC 6.3 A 87 % TXM VDC VDC 3.2 A 88 % * Total power must not exceed specified max. output power Input Specifications Input voltage range nominal VAC AC range (universal input) VAC DC range VDC Input voltage frequency Hz Input current at full load TXM 015/025 models: 0.70 A max. TXM 035 models: 1.00 A max. TXM 050 models: 1.50 A max. TXM 075 models: 2.50 A max. TXM 100 models: 1.70 A max. TXM 150 models: 2.00 A max. Recommended circuit breaker up to 75 Watt models: 5 A (characteristic C) or slow blow fuse up to 320 Watt models: 10 A Output Specifications Regulation Input variation 0.5 % max. Load variation (10 100%) TXM 015, 025, 075: 2 % max. all other models: 1 % max. Minimum load: no minimum load required Ripple and noise (20 MHz bandwidth) < 1.0 % of Vout nom. typ. Output current limitation TXM 015: 110 % 180 % of Iout max. all other models: 105 % 150 % of Iout max. Overload protection mode Hiccup / constant power, automatic recovery Over voltage protection (only output 1) 105 % 150 % of Vout nom. (depending on model) Page 2 of 6

3 General Specifications Enclosed Power Supplies Temperature ranges Operating TXM 100/ C to +60 C TXM 015/025/035/050/ C to +70 C Load derating above 40 C TXM 100 or 3.3/5V 2.5%/ K (1.3 %/ K for 3.3/5V) Load derating above 40 C TXM 150 or 3.3/5V 1.67%/ K (1.3 %/ K for 3.3/5V) Load derating above 50 C all other models 2 %/ K (4 %/ K for TXM 200; 3.3%/K for TXM 320) Storage (non operating) 30 C to +85 C Temperature coefficient all models 0.03%/ C Humidity (non condensing) Hold-up time 90 % rel. H max. (non condensing) 10 ms min. (115 VAC) 10 ms min. (230 VAC) Isolation voltage (60 sec.) Input/Output VAC Input/Case VAC Output/Case 500 VAC Reliability /calculated MTBF (MIL-HDBK-217F, at +25 C typ., ground benign) Altitude during operation > h TXM 015 & 025 models: m max. (6 667 ft) approved all other models: m max. ( ft) approved Electromagnetic compatibility Conducted input RI suppression EN 55022, class B (EMC), Emissions Harmonic current emissions IEC/EN , Flicker IEC/EN Electromagnetic compatibility Electrostatic discharge ESD IEC/EN kv / 8 kv criteria B (EMC), Immunity RF field immunity IEC/EN V/m criteria A Electrical fast transients/burst immunity IEC/EN kv criteria B Surge IEC/EN kv / 2 kv criteria B Conducted RF IEC/EN V/m criteria A Magnetic field IEC/EN A/m criteria A Safety standards UL/cUL UL (entry for W models is pending) CB report TXM 100 & TXM 150 models: EN :2006/A11:2009/A1:2010/ A12:2011/A2:2013 IEC (ed.2) IEC (ed.2)Am1, IEC (ed.2)Am2 all other models: IEC /A1:2009 Certification documents Environmental compliance Reach declaration RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25 C after warm-up time unless otherwise stated. Page 3 of 6

4 Case Dimensions Case for TXM 015 & TXM 025 Pin Function Weight: TXM 015: 165 g TXM 025: 175 g Case for TXM (4.00) 4 55 (2.17) 20.5 (0.81) 8.25 (0.32) 35 (1.38) 45.7 (1.8) 6 (2.5) 6.1 (0.24) 4.3 (0.17) 101(3.98) 4.5 (0.18) 88 (3.46) 6.5 (0.26) 74 (2.91) Weight: 200 g 16.5 (0.65) 26 (1.02) 33 (1.30) Max mounting screw penetration: 2.0 mm (0.08) Page 4 of 6

5 Case Dimensions Case for TXM (0.12) 99 (3.90) 91.5 (3.60) 55 (2.17) 20.5 (0.81) 5.8 (0.23) (0.37) (0.18) 6.7 (0.26) 36.5 (1.44) 82 (3.23) Weight: 260 g 5.5 (0.22) 74 (2.91) 13 (0.51) 87 (3.43) 5 (0.2) Customer plate SMPS Cover Assemble Screw 17.5 (0.69) 28 (1.1) 35 (1.38) L<=4mm Case for TXM (5.08) (4.78) 78 (3.07) 4.5 (0.18) (0.92) 33 (1.3) 31 (1.22) 8.02 (0.32) 9.53 (0.38) 49.2 (1.94) 17 (0.67) 99 (3.9) 85.5 (3.37) 7 (0.28) Weight: 380 g 12 (0.47) (0.43) (0.71) (4.7) (3.43) 20 (0.26) (0.79) 20 (0.79) 29 (1.14) 38 (1.5) Page 5 of 6

6 Case Dimensions Case for TXM 100 Weight: 455 g Case for TXM Vout 4 +Vout Weight: 625 g Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at Rev. May Page 6 of 6