Pilot Scout 2.1 Datasheet V12.12

Transcription

1 Pilot Scout 2.1 Datasheet V12.12

2 Contents Contents 1 What's New Overview Brief Introduction System Architecture Performance & Feature Test Services Features Application Scenarios Supported Modules Hardware Specification Technical Support and Contact Information Technical Support Link to DingLi... 11

3 What's New 1 What's New 1. Real-time test device status reported to Pilot Fleet Unify web. 2. Optional logfile formats (*.dcf, *cti, *dtlog, *cu) as well as the default logfile format *rcu. 2

4 Overview 2 Overview 2.1 Brief Introduction Pilot Scout 2.1 is a new enhanced version of Pilot Scout that comes with high-performance CPU and built-in high-sensitivity GPS chipset. It is an autonomous mobile network QoS/QoE portable test equipment. The equipment is compact and highly stable, and supports remote automatic testing, which makes it suitable for small or discreet installation spaces. Pilot Scout 2.1 is the most portable and cost-efficient remote test equipment, suitable for large-scale deployment. The main features are as below: Portable test and measurement solution supporting all major network technologies and services testing, including voice, MOS, HTTP, FTP, Attach, PDP, video telephony, SMS, MMS, WAP, , PING, Video Play, TraceRoute, SpeedTest, HTTP Upload, PBM etc. Real-time data transmission through modem or WiFi Embedded system that is able to integrate with baseband chip of varied network technologies and internal Linux system, ensuring device stability and reliability Supported technologies: CDMA IS95/1X/EVDO, TD-SCDMA/HSDPA, GSM/EDGE/GPRS, UMTS/HSDPA/ HSUPA/HSPA+, and LTE Distributed coverage of test probes, positioned within unique and strategic locations in the operator's network Probes administration, and measurement data transfer is managed through a central server System management, administration, reports generation and control performed through a web browser 2.2 System Architecture Pilot Scout can mutually communicate with the central server over SMS or TCP. The upstream communication handles uploading of test results, collected data, and alarms from Pilot Scout to the central server, while the downstream communication handles distribution of commands and test tasks from the central server to Pilot Scout. See Figure

5 Overview Figure 2.1 System architecture 4

6 Performance & Feature 3 Performance & Feature 3.1 Test Services Pilot Scout supports the following services test: Voice call (MOS) ATTACH, PDP PING HTTP Page/Download WAP MMS FTP (DL & UL) Multi FTP (DL & UL) SMS Traceroute Speed Test Pulse-sampling Bandwidth Measurement (PBM) HTTP Upload CSFB Video Play (e.g. Youtube) DNSLookUp VoLTE (PESQ, mobile to mobile) App Facebook 3.2 Features Pilot Scout 2.1's main features are as below: Pocket-sized for indoor test and drive test RISC processing platform, ensuring high performance with low power consumption Supports GSM, GPRS/EDGE, CDMA, EVDO, TD-SCDMA, UMTS/HSDPA/HSPA, and LTE technologies Internal antennas (external antennas are optional) Supports service test with a single test module or two test modules simultaneously, with real-time data upload to Pilot Fleet Unify server Support MO/MT mobile-to-mobile voice quality MOS testing Supports WiFi b/g/n/ac and Bluetooth 4.0 Internal GPS module; supports Bluetooth GPS; applicable to drive test scenario In-vehicle OLED screen that may display real-time test progress and status Data transmission through wireless Modem, WiFi or Ethernet Support LTE cell lock with specific modules 5

7 Performance & Feature 3.3 Application Scenarios The application scenarios of Pilot Scout 2.1 are as below: Remote and autonomous indoor test: Pilot Scout, which is remotely controlled, can be deployed in densely populated public places, such as Shopping Mall, office building, metro station, airport, etc. Pilot Scout can be used to conduct long-term indoor tests, collecting high volume data reflecting true network quality and performance. Base Station Monitoring: Pilot Scout 2.1 can be deployed by co-locating with the base station or near it, to monitor the base station performance. If any error is detected, Pilot Scout may send out alarm information. Single channel autonomous drive test: Pilot Scout 2.1 can be installed in public transportation such as taxis, buses, or trains, and can be used to conduct long-term tests based on defined test plans. Compared to RCU, Pilot Scout is well suited for large scale deployment and data collection because of its price advantage. Monitoring Major Events: During major events, Pilot Scout 2.1 can be deployed in corresponding areas to monitor network conditions in real-time, and identify and troubleshoot the possible network problems. Unique test positioning: Pilot Scout 2.1 can be used in areas not reachable with traditional drive test tool or with a vehicle, due to its unique form factor. Detecting and troubleshooting network problems from the daily test: In some cases, a short term test is not enough to detect specific network problems. Pilot Scout can be deployed on the site to continuously collect data and detect network problems for troubleshooting. Wireless Hotspot: The scout 2.1 can be served as a wireless hotspot by converting 3G/4G data connectivity into WiFi hotspot. 3.4 Supported Modules Module Frequency Module 1 WCDMA: 850/1900/2100 MHz GSM/GPRS/EDGE: 850/900/1800/1900 MHz Module 2 FDD-LTE: Band 1(2100)/4(AWS170)/17(700) WCDMA: 800/850/1900/2100 MHz GSM/GPRS/EDGE: 850/900/1800/1900 MHz Module 3 FDD-LTE: 800/900/1800/2100/2600 MHz WCDMA: 900/2100 MHz GSM/GPRS/EDGE: 850/900/1800/1900 MHz Module 4 FDD-LTE: Band 1/3/7/8/20 UMTS: Band 1/2/5/6/8 6

8 Performance & Feature Module Frequency GSM: 850/900/1800/1900 MHz Module 5 CDMA 1xRTT/EVDO RevA: 800 MHz Module 6 TDD-LTE: Band 38/39/40/41 FDD-LTE: Band 1/3/5 UMTS: Band 1/5 GSM: 850/900/1800/1900 MHz Module 7 FDD-LTE: Band 1/3/7/17 TDD-LTE: Band 38/39/40/41 WCDMA: Band 1/2/5/8 GSM: 1900/1800/900/850 MHz Module 8 FDD-LTE: Band 1/2/3/4/5/7/8/20/28 WCDMA: Band 1/2/3/4/5/8 GSM: 1900/1800/900/850 MHz Module 9 WCDMA: Band 1/2/5/8 Quad-band EDGE/GPRS/GSM: 1900/1800/900/850 MHz Module 10 FDD-LTE: Band 1/2/3/4/5/7/8/20/26/28 TDD-LTE: Band 38/39/40/41 WCDMA: Band 1/2/4/5/8 CDMA/EVDO: Band bc0/bc1 GSM: 1900/1800/900/850 MHz CA: Intra-band contiguous: 2/3/4/7/38/39/40/41 Intra-band non-contiguous: 2/3/4/7/41 Inter-band: 1+3, 1+5, 1+7, 1+8, 1+20, 1+26, 3+5, 3+7, 3+8, 3+20, 3+26, 3+28, 7+20, 7+28, 5+7, (support LTE-A) Module 11 FDD-LTE: Band 1/3/5/7/8/18/19/21/28 TDD-LTE: Band 38/39/40/41 WCDMA: Band 1/5/6/8/9/19 7

9 Performance & Feature Module Frequency 2CC CA: 1 + 1/5/8/18/19/ /5/7/8/19/ /7/ / (support LTE-A) FDD-LTE: Band 1/3 TDD-LTE: Band 38/39/40/41 Module 12 WCDMA: Band 1 CDMA: Band BC0 GSM: 900E/1800 Module 13 FDD-LTE: Band 1/2/3/4/5/7/8/20/26/28 TDD-LTE: Band 38/39/40/41 WCDMA/HSPA+: Band 1/2/5/8 Quad-band EDGE/GPRS/GSM: 1900/1800/900/850 MHz Module 14 FDD-LTE: Band 1/3/5/8 TDD-LTE: Band 38/39/40/41 HSPA/UMTS: 900/850/2100 MHz GSM/GPRS/EDGE: 850/900/1800 MHz EVDO/CDMA: BC0 8

10 Hardware Specification 4 Hardware Specification Item Description Color CPU Flash Disk Configuration Supported technologies Wi-Fi GPS Black ARM, quad-core 4G /8G/16GB Flash memory Modem+ Testing Module+ WIFI+ GPS+ Bluetooth 2G/3G/4G (FDD-LTE/TDD-LTE) For details about each module, see section 3.4. IEEE b/g/n/ac, 2.4/5.8 GHz Built in GPS; supports external antenna or Bluetooth GPS Note: For the external antenna and Bluetooth GPS antenna, customers may enquire Dingli sales for supply and information. Antenna Human-computer Interface Built-in antenna for Modem and test module LED screen and touch screen *1 Indicator light *3 Button Power key *1 Capacitive touch panel *1 Interface RJ45 network interface *1 External GPS antenna interface *1 SIM card slot *2 Dimension Weight x 78.5 x 18.8 mm Around 215 g (with battery) In-built Li Battery Rated Voltage: 3.7 V Rated Capacity: 2400 mah Power 5.5 W (avg.) Consumption Standby Power 20 mw (powered by battery only) Consumption Battery More than 90 minutes Performance 9

11 Hardware Specification Item Description Input Power Work Current Operating Environment DC 5 V, 2 A 1.1 A (avg.), 1.6 A (max. internal battery charge) Working temperature: -20 to +50 C Storage temperature: -45 to +85 C Humidity: no more than 93%RH, +40 C Working storage altitude: 3500 m Protective box (for security), Cigarette lighter charger kit, and Accessories (optional) mounting plate (to secure the device to a wall) Note: Alternatively, an externally sourced power bank (5 V input and 2.1 A output) can also be used to power the Pilot Scout unit using the cable kit accessories. 10

12 Technical Support and Contact Information 5 Technical Support and Contact Information 5.1 Technical Support For any product usability issues encountered during operation, please refer to the user manual. If the issue cannot be solved or information is not available, please contact us via the following contact information: Area Global support@dingli.com 5.2 Link to DingLi For more product information or service and technical support, please visit us at 11

13 DINGLI CORP., LTD Address: No. 8, 5 th Technology Road, Gangwan Avenue, Zhuhai, , P.R. China Tel: Fax: support@dingli.com sales@dingli.com