Switched-Mode Power Supplies. 5, 12, 18, 48 VDC Output
|
|
- Mervyn Chandler
- 5 years ago
- Views:
Transcription
1 Switched-Mode Power Supplies.,,, VDC Output Nominal output current [ADC] Input, -phase Input, -/-phase EN 0 curus 090 Approvals culus 0 GL ANSI/ISA.. ATEX/IEC Ex DC OK signal/contact RS- serial interface TopBoost * PowerBoost Efficiency, typ. [%] Ambient operating temperature [ C] **** Item Number Page Output: VDC Output: VDC ** -00 -** Output: VDC -0 9 Output: VDC Nominal input voltage [VDC] Nominal voltage output [VDC] Nominal output current [A] curus 090 culus 0 Approvals GL ANSI/ISA.. ATEX/IEC Ex EN 0 DC OK signal/contact Efficiency, typ. [%] Ambient operating temperature [ C] Item Number Page /0/ / yes pending * TopBoost enables magnetic tripping of circuit breakers in the output circuit. ** Class Power Unit acc. to curus 0 or curus 090 *** with uninterruptible power supply (UPS) **** Device starts at -0 C type-tested for -xx, -0xx, -xx
2 EPSITRON COMPACT Power Series H L W Technical Data Input Frequency 0 Hz Inrush current < 0 A, NTC Output Nominal output voltage U o nom VDC (SELV) Output current I o.0 A at VDC, max.. A in any mounting position Factory preset VDC Residual ripple < 00 mv (peak-to-peak) up to 0 MHz Current limitation. x I o typ. Overload behavior Constant current Operational indication LED green (U o ) Fuse Protection Internal fuse T A / VDC External fuse Electronic circuit breaker A, 0 A, B, C characteristic EN 090, EN 0-, EN 0--, EN 0 *, UL 090 *, UL 0 *, GL * * (pending) Environmental Requirements Ambient operating temperature C Storage temperature -0 + C Relative humidity 9 % (varnished PCB) Derating -. % / K (> C) Degree of pollution (acc. to EN 0) Climatic category K (acc. to EN 0) Shock and vibration Category, Class B (per EN :00) Safety and Protection Enclosure Plastic, light gray, Flammability class V0 acc. to UL9 Test voltage PRI-SEC. kv (DC) Protection class II Degree of protection IP0 per EN 09 Overvoltage category II Varistor (input side); Overvoltage protection internal protective circuit, < 0 VDC (output side in case of an error) Short-circuit-protection No-load proof Feedback voltage Max. VDC Parallel operation Series connection MTBF > 00,000 h Fire load MJ Connection and Type of Mounting Connectors Input/Output: WAGO 0 Series Conductor range Input/Output: 0.0. mm² / AWG Strip length Input/Output: mm / inch Type of mounting D-rail mounting (EN 0) Dimensions and Weight Dimensions (mm) W x H x L x 9 x 9, Length: mm from upper-edge of D- rail Weight 0 g
3 Similar to pictured device COMPACT Power, input voltage: 0 VDC, output: VDC / A -0 COMPACT Power, input voltage: VDC, output: VDC / A -0/0-000 Nominal input voltage U i nom 0 VDC VDC Input voltage range 0 VDC 0 90 VDC Input current I i 0. A at VDC; 0. A at 0 VDC 0.9 A at VDC Mains failure hold-up time > ms at VDC; > ms at 0 VDC > ms at VDC Adjustment accuracy 0 % % Efficiency % (typ.) % (typ.) Power loss P V.9 W (0 VDC/no load), 9.9 W (0 VDC/nominal load).0 W ( VDC/no load), 9.0 W ( VDC/nominal load) Power loss P V (max.) 9.9 W typ. ( VDC / VDC, A) 0. W typ. (0 VDC / VDC, A) 9
4 EPSITRON Series < 9, mm/. in. > < 9 mm/. in. > _> mm/0. in. Features: DC/DC Converter in a compact mm housing -xx LC/DC Converters supply devices with, 0, or VDC from a power supply with or VDC, with an output power up to W. Output voltage monitoring via DC OK contact Can be commoned with and Series devices Comprehensive range of approvals for multiple applications _> Technical Data Input Inrush current < 0. A ( ms, at nominal input voltage) Output Output current I o 0. A Mains/load regulation < % Residual ripple 0 mv (peak-to-peak) Operational indication LED green (Uo), LED red (short circuit) Signaling DC OK contact (Ui, max. ma) Fuse Protection Internal fuse None Environmental Requirements Ambient operating temperature - +0 C Storage temperature -0 + C Relative humidity 9 % (no condensation permissible) Derating No derating Degree of pollution (acc. to EN 0) Climatic category K (acc. to EN 0, except for low air pressure) Safety and Protection Protection class III Reverse voltage protection Degree of protection IP0 per EN 09 Short-circuit-protection No-load proof Parallel operation No Series connection No MTBF >,00,000 h Connection and Type of Mounting Connection technology Push-in CAGE CLAMP (WAGO Series) Conductor range solid: 0.0. mm² / AWG fine-stranded: 0.. mm² / AWG Strip length 9 0 mm / inch Type of mounting D-rail mounting (EN 0) Dimensions and Weight Dimensions (mm) W x H x L x 9. x 9, Height from upper-edge of D- rail Weight g 0
5 input voltage: VDC, output: VDC / 0. A -0 input voltage: VDC, output: 0 VDC / 0. A -0 Nominal input voltage U i nom VDC VDC Input voltage range 0 0 VDC 0 VDC Input current I i < 0. A < 0. A Nominal output voltage U o nom VDC (± %) 0 VDC (± %) Adjustment accuracy < % < % Efficiency >. % (at nominal input voltage and nominal output) > 9 % (at nominal input voltage and nominal output) Power loss P V < 0. W (no load); < 0. W (nominal load) < 0.9 W (no load); < 0. W (nominal load) Feedback voltage V V ; EN 000--, EN 000--, EN 090-, UL 090*, UL 0*, ANSI/ISA..0*, ATEX*, IEC Ex*, GL* (*pending) ; EN 000--, EN 000--, EN 090-, UL 090*, UL 0*, ANSI/ISA..0*, ATEX*, IEC Ex*, GL* (*pending)
6 EPSITRON Series input voltage: VDC, output: VDC / 0. A -0 input voltage: VDC, output: VDC / 0. A -0 Nominal input voltage U i nom VDC VDC Input voltage range 0 VDC 0 VDC Input current I i < 0. A < 0. A Nominal output voltage U o nom VDC (± %) VDC (± %) Adjustment accuracy < % < % Efficiency > 90 % (at nominal input voltage and nominal output) > 9 % (at nominal input voltage and nominal output) Power loss P V < 0. W (no load); < 0. W (nominal load) < 0.9 W (no load); <. W (nominal load) Feedback voltage V V ; EN 000--, EN 000--, EN 090-, UL 090*, UL 0*, ANSI/ISA..0*, ATEX*, IEC Ex*, GL* (*pending) ; EN 000--, EN 000--, EN 090-, UL 090*; UL 0*; ANSI/ISA..0*; ATEX; IEC Ex*, GL* (*pending)
7 EPSITRON DC-DC converter, input voltage: VDC, adjustable output voltage: /0/ VDC, output current: 0. A -0 Nominal input voltage U i nom VDC Input voltage range 0 VDC Input current I i < 0. A Nominal output voltage U o nom /0/ VDC (± %) set via DIP switches Adjustment accuracy < % Efficiency >. % (at nominal input voltage and nominal output) Power loss P V < 0. W (no load); < 0. W (nominal load) Feedback voltage V ; EN 000--, EN 000--, EN 090-, UL 090*, UL 0*, ANSI/ISA..0*, ATEX*, IEC Ex*, GL* (*pending)
QUINT-PS/24DC/48DC/ 5
Extract from the online catalog QUINT-PS/24DC/48DC/ 5 Order No.: 2320128 QUINT DC/DC converter, primary-switched, input: 24 V DC, output: 48 V DC/5 A Commercial data GTIN (EAN) sales group Pack Catalog
More informationPower supply CP-C 24/5.0
2CDC 271 064 F0004 Features Supply voltage ranges: 85-264 V AC, 100-350 V DC Output voltage adjustable from 22-28 V DC, default setting 24 V DC 0,5 % 5 A output current Open-circuit, overload and continous
More informationEPSITRON Advanced Power Supplies. High-Performance and Efficient
EPSITRON Advanced Power Supplies High-Performance and Efficient WAGO EPSITRON Advanced Pages 4-9 EPSITRON PRO Power Single- and three-phase power supplies with a wide input voltage range and 12 V, 24 V
More informationSITOP in the SIMATIC Design
Siemens AG 2017 /2 Introduction /3 1-phase, 24 V DC (for S7-300 and ET 200M) /9 1-phase, 24 V DC (for S7-1200) /11 1-phase, 24 V DC (for S7-1500 and ET 200MP) /14 3-phase, 24 V DC (ET 200pro) Siemens KT
More informationPHOENIX CONTACT - 08/2009. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Primary-switched power supply for building automation INTERFACE Data sheet 103505_en_02 1 Description PHOENIX CONTACT - 08/2009 Features STEP POWER power supply units for building automation The new STEP
More informationMINI-PS AC/10-15DC/8
Primary-Switched Power Supply, Narrow Design Data Sheet 08/2004 MINI POWER provides: An extra narrow design, with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a
More informationSTEP-PS/1AC/24DC/2.5. Extract from the online catalog. Order No.: DIN rail power supply of 24 V DC/2.5 A, primary switched, single phase.
Extract from the online catalog STEP-PS/1AC/24DC/2.5 Order No.: 2868651 DIN rail power supply of 24 V DC/2.5 A, primary switched, single phase. Commercial data EAN 4046356163224 Pack 1 pcs. Customs tariff
More informationSTEP-PS/1AC/24DC/1.75
Primary-switched power supply, 1 AC, output current 1.75 A INTERFACE Data Sheet 103506_en_00 1 Description PHOENIX CONTACT - 05/2008 Features STEP POWER power supply units for building automation The new
More informationPHOENIX CONTACT - 06/2007. DANGER OF EXPLOSION! Remove an item only when it is not connected to power or if it is located in the non-explosive area.
Primary switched power supply, 3-phase, output current: 40 A INTERFACE Data Sheet 102782_01_en PHOENIX CONTACT - 06/2007 Description TRIO POWER is the rail mountable 24 V power supply unit with basic functions.
More informationTRIO-PS/1AC/24DC/20. Extract from the online catalog. Order No.:
Extract from the online catalog TRIO-PS/1AC/24DC/20 Order No.: 2866381 DIN rail power supply unit, primary-switched mode, 1-phase, output: 24 V DC / 20 A Commercial data EAN 4046356046664 Pack 1 pcs. Customs
More informationDC/DC converters - QUINT-PS/24DC/24DC/
Primaryswitched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 24 V DC, output: 24 V DC/5 A Product Description QUINT DC/DC converter with maximum functionality
More informationRTU500 series Data Sheet Power Supply CP-E 24/2.5
Data Sheet Power Supply CP-E 24/2.5 Power Supply CP-E 24/2.5 Application The primary switch mode power supply offers two voltage input ranges. This enables the supply with AC or DC. Furthermore it is equipped
More informationQUINT-PS AC/24DC/10
Extract from the online catalog QUINT-PS-100-240AC/24DC/10 Order No.: 2938604 DIN rail power supply unit 24 V DC/10 A, primary switched-mode, 1- phase Commercial data EAN 4017918890537 Pack 1 Pcs. Customs
More informationPower Supply HARTING pcon
HARTING pcon 2120 Advantages Compact design and high power density Easy installation and tool-less connection Wide input range for world-wide use Wide operating temperature range (up to 70 C without derating)
More informationPower Supply HARTING pcon
HARTING pcon 2060 Advantages Compact design and high power density Easy installation and tool-less connection Wide input range for world-wide use Wide operating temperature range (up to 70 C without derating)
More informationPower supply. Interface technology in modular housing DIN rail devices, IM series. Features
Features 2,2 kò,5 W 5 V 5,1 V,3 W 24 VDC 2,5 A GN / L 85...264 VAC 9...375 VDC / N Safety extra-low voltage SELV IEC/ EN 695 Output voltage adjustable 24 28 VDC Nominal current 2.5 A Single/parallel operating
More informationQUINT-PS/1AC/24DC/10. Extract from the online catalog. Order No.:
Extract from the online catalog QUINT-PS/1AC/24DC/10 Order No.: 2866763 DIN rail power supply unit 24 V DC/10 A, primary-switched mode, 1- phase. The SFB technology (Selective Fusebreaking Technology)
More informationQUINT-PS/ 1AC/24DC/20/CO
Extract from the online catalog QUINT-PS/ 1AC/24DC/20/CO Order No.: 2320898 DIN rail power supply unit 24 V DC/20 A/CO, dip-coated circuit board, primary-switched, 1-phase. For the first time, SFB (selective
More informationIndustrial Power Supplies
, Rugged metal case for harsh industrial environments Industrial operating temperature range: 25 C to +70 C Overload and and overtemperature protection Power boost up to 120 % Power-Good signal Shock and
More informationPower supply CP-E 48/1.25 Primary switch mode power supply
Data sheet Power supply CP-E 48/1.25 Primary switch mode power supply The CP-E range offers enhanced functionality while the number of different types has been considerably reduced. Now all power supply
More informationQUINT-PS/ 1AC/24DC/ 5
Extract from the online catalog QUINT-PS/ 1AC/24DC/ 5 Order No.: 2866750 DIN rail power supply unit 24 V DC/5 A, primary switched-mode, 1- phase. The SFB technology (Selective Fuse Breaking Technology)
More informationDeltaV Bulk Power Supplies
DeltaV Distributed Control System Product Data Sheet DeltaV Bulk Power Supplies DeltaV 5 A, 10A, 20 A, 40 A Bulk Power Supplies. DeltaV 20 A, 40 A and 80 A Bulk Power Supply Redundancy Modules. Easy to
More informationDeltaV Bulk Power Supplies
DeltaV Distributed Control System Product Data Sheet DeltaV Bulk Power Supplies DeltaV 5 A, 10A, 20 A, 40 A Bulk Power Supplies. DeltaV 20 A, 40 A and 80 A Bulk Power Supply Redundancy Modules. Easy to
More informationPHOENIX CONTACT - 01/2007
Uninterruptible power supply INTERFACE Data Sheet 103123_00_en PHOENIX CONTACT - 01/2007 Description Especially compact and easy-to-use, the new MINI-DC-UPS/ 24 DC/2 is a combination of the power supply
More informationManual. Q.PS-PEL-240x 24 VDC Power Supply Unit. Document ; Version ENG
Manual Q.PS-PEL-240x 24 VDC Power Supply Unit Document 27-646; Version ENG0 205-08-27 Contents Document versioin Document version Version Changes Published Remarks ENG0 205-08-27 205-08-27 New document
More informationASI QUINT /2.4 EFD
Extract from the online catalog ASI QUINT 100-240/2.4 EFD Order No.: 2736686 Power supply unit für AS interface, 2.4 A, integrated ground fault detector, IP20 degree of protection Commercial data EAN 4017918959678
More informationSimple but elegant look and ease of installation make it ideal for various industrial applications.
This LDD240-WU DC/DC converter is the optimal response to the applications where compactness and high reliability are requested. It is isolated and offers a wide range of input and output voltages. Simple
More informationIndustrial Power Supplies
50-600 Watt Features Switch mode power supplies for DIN-rail mounting 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise
More informationSITOP power supply. LOGO!Power. Overview. Safety instructions. Description, device design, dimension drawing. Mounting/removal 3
Overview Safety instructions 1 SITOP power supply Manual Description, device design, dimension drawing 2 Mounting/removal 3 Mounting position, mounting clearances 4 Installation 5 Technical data 6 Safety,
More informationRhino Buffer Module PSM24-BFM600S. Operating Instructions
Rhino Buffer Module PSM24-BFM600S Operating Instructions RHINO BUFFER MODULE PSM24-BFM600S Description The PSM24-BFM600S Buffer Module will hold the output voltage of a 24 VDC power supply after brownouts
More informationIndustrial Power Supplies
, Features For industrial, office and residential applications Ultracompact plastic housing Connection by spring clamp terminals or detachable screw terminal block Reliable snap-on mounting on DIN-rails
More informationPower Supply, Primary Switch Mode for Universal Use QUINT-PS AC/48DC/5
Power Supply, Primary Switch Mode for Universal Use -PS-100-240AC/48/5 POWER provides: Preventive function monitoring through professional signaling Global use due to a wide range input A high level of
More informationMINI-DC-UPS/12DC/4. Extract from the online catalog. Order No.:
Extract from the online catalog MINI-DC-UPS/12DC/4 Order No.: 2866598 Uninterruptible power supply with integrated power supply unit, 4 A, in combination with MINI-BAT/12/DC 1.6 Ah or 2.6 Ah Commercial
More informationPHOENIX CONTACT - 05/2008. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Primary switched power supply, 1-phase, output current: 5 A ITERFACE Data Sheet 103349_en_00 1 Description PHOEIX COTACT - 05/2008 Features TRIO POWER is the DI-rail-mountable power supply unit with basic
More informationPHOENIX CONTACT - 07/2006
Buffer module with maintenance-free capacitor-based power storage device INTERFACE Data sheet 102035_03_en PHOENIX CONTACT - 07/2006 Description Short-term mains interruptions are bridged by QUINT BUFFER,
More informationPHOENIX CONTACT - 01/2010. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Uninterruptible power supply with integrated power supply unit INTERFACE Data sheet 104211_en_00 1 Description PHOENIX CONTACT - 01/2010 Features The MINI-DC-UPS provide an uninterruptible DC voltage both
More information8B0C0320HW General information. 2 Order data. 3 Technical data 8B0C0320HW
1 General information Connections for supplying external 24 V devices Extensive protective measures 2 Order data Model number Short description Figure Wall mounting ACOPOSmulti auxiliary supply module,
More informationPHOENIX CONTACT - 05/2008. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Primary switched power supply, 1-phase, output current: 5 A ITERFACE Data Sheet 102777_en_03 1 Description PHOEIX COTACT - 05/2008 Features TRIO POWER is the DI-rail-mountable power supply unit with basic
More informationIndustrial Power Supplies
, NEW Features For Industrial, Office and Residential Application Ultracompact Plastic Housing Connection by Cage Clamps Terminals or plugable Screw Terminals Reliable snap-on Mounting on DIN-Rails Adaptor
More informationArticle No. 6GK59230PS003AA2 6GK59240PS001AA2 Product Name. Power Supply SCALANCE PS924 PoE Input: 120/230V AC; Output: 54V/ 1.
Product Name Type of power supply Electrical data Input Waveform of the input Supply Power Supply SCALANCE PS924 PoE Input: 120/230V AC; Output: 54V/ 1.6A DC; NEC Class 2 single-phase AC Power Supply SCALANCE
More informationPower Supplies V7-T6-2 V7-T6-4 V7-T6-10 V7-T6-16 V7-T6-36 V7-T6-39 V7-T6-43
Power Supplies Power Supplies.1 General Purpose and Sensor Power Supplies Product Selection Guide................................... PSL Series.............................................. PSC Series..............................................
More informationPower supply CP-E 24/0.75 Primary switch mode power supply
Data sheet Power supply CP-E 24/0.75 Primary switch mode power supply The CP-E range offers enhanced functionality while the number of different types has been considerably reduced. Now all power supply
More informationQUINT-PS-3x AC/24DC/10
3-Phase Primary-Switched Power Supply Unit INTERFACE Data Sheet PHOENIX CONTACT - 12/2005 Description QUINT POWER devices are 60...960 W power supply units for universal use. This is ensured by the wide-range
More informationFeatures, Benefits and Functions
.5-44 September 2011 Sheet 084 PSG Series DC Power Supplies PSG Series General Description Eaton s PSG Series of power supplies is designed to be a high-performance, high-quality line of products covering
More informationPower supply CP-E 24/10.0 Primary switch mode power supply
Data sheet Power supply CP-E 24/10.0 Primary switch mode power supply The CP-E range offers enhanced functionality while the number of different types has been considerably reduced. Now all power supply
More informationPower Supply, Primary Switch Mode, Narrow Design MINI-PS AC/24DC/1
Power Supply, Primary Switch Mode, arrow Design -PS-100-240AC/24/1 POWER provides: Extra narrow widths of 22.5, 45, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide range input A high
More informationSITOP PSU300M/300B. SITOP power supply SITOP PSU300M/300B. Overview. Safety notes 1. Description, device design, dimension drawing 2
Overview Safety notes 1 SITOP power supply Manual Description, device design, dimension drawing 2 Mounting/disassembly 3 Mounting position, mounting clearances 4 Installation 5 Technical data 6 Safety,
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 55 mm Suitable for mounting in domestic installation panels Very high efficiency and low standby power -> compliance to
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 59,5mm Suitable for mounting in domestic installation panels Low output ripples and spikes Fully compliance to ECO-Standard
More informationABL1REM24100 regulated SMPS - single phase V input - 24 V output W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 240 W Complementary Input voltage limits Network frequency limits Inrush current Main Range of product Product or component
More informationTypical Input current at 1.15A 0.65A 60 Watt 24VDC / 2.5A. 1.84A 1.0A 120 Watt 24VDC / 5.0A
SmartPower TM The Autotech SmartPower is a DC switching power supply with 24V output Voltage. This user friendly power supply has two 7-segment LED displays for voltage and current monitoring. This DC
More informationMicro Contactor MA Series
Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC
More informationSITOP 3-phase 24 V DC, 20 to 40 A
Siemens AG 2013 SITOP 3-phase, 20 to 40 A /2 SITOP 20 A /2 SITOP 20 A /2 20 A /3 SITOP PSU300B 30 A /3 SITOP 40 A /3 SITOP 40 A /3 40 A /8 Ordering data and further information For AL and ECCN export regulations
More informationIndustrial Power Supplies
75-600 Watt Features Switch mode power supplies for DIN-rail mounting 4 power ranges with 3, 6, 12 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise EMI complies
More informationSeries AME5-CJZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 000V Continuous Short circuit protection Operating Temp: -2 C to 0 C Energy Star compliant Input: -26V, -6Hz, or 20-0VDC pact
More informationEasy Analog RNB130. Technical Information. Primary switched-mode power supply
Technical Information Easy Analog RNB130 Primary switched-mode power supply Your benefits Small housing, 35 mm (1.38") width High availability Wide range input - can be used world-wide Power reserve (Power
More informationChrome DIN Rail Power Supply 12V 9.96W 1 Phase (Class II & NEC Class 2) / DRC-12V10W1A
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
More informationTRIO-DIODE/12-24DC/2X10/1X20
Redundancy module INTERFACE Data sheet 104278_en_00 1 Description PHOENIX CONTACT 20100423 Features TRIO DIODE is the DINrail mountable redundancy module from the TRIO POWER product range. Using the redundancy
More informationSITOP PSU8600 power supply system
Siemens AG 201 /2 Introduction /5 3-phase, basic units 24 V DC (PSU8600) /10 Modular system, expansion of outputs (CNX8600) /13 Modular system, buffer (BUF8600) Siemens KT 10.1 201/2018 Siemens AG 201
More informationThrough-Board SMD PCB Terminal Block; 0.75 mm² Pin Spacing: 6.5 mm 2070 Series
Volume, Section SMD PCB Terminal Blocks Through-Board SMD PCB Terminal Block; 0.75 mm² 070 Series SMD PCB terminal blocks with Push-in CAGE CLAMP connection for back-side wiring of LED modules Low profile
More informationLOGO!Power. Power supply. LOGO!Power. Overview. Safety instructions 1. Description, device design, dimension drawing. Mounting/disassembly
Overview Safety instructions 1 Power supply Operating Instructions Description, device design, dimension drawing 2 Mounting/disassembly 3 Mounting position, mounting clearances 4 Installation 5 Technical
More informationPower Supplies V7-T6-2 V7-T6-3 V7-T6-22 V7-T6-25 V7-T6-29
Power Supply.1 General Purpose and Sensor Product Selection Guide................................... PSG Series.............................................. ELC Series..............................................
More informationMMA-15 series. 15W Medical Grade Ultraminiature Switching Power Supplies. Single / Dual / Triple Outputs. Universal 90 to 264VAC Input
Single / Dual / Triple Outputs Universal 90 to 264VAC Input 3.3VDC to 24VDC Outputs Chassis 3.96 L x 2.16 W x 1.0 H 4,000VAC Input to Output Isolation PCB and Chassis Mount Packages Full Safety Approvals
More information1-Phase Power Supply, Primary Switch Mode for Use in Potentially Explosive Areas QUINT-PS AC/24DC/5/EX
1-Phase Power Supply, Primary Switch Mode for Use in Potentially Explosive Areas -PS-100-240AC/24/5/EX POWER provides: Preventive function monitoring through professional signaling Global use due to a
More informationChrome DIN Rail Power Supply 5V 7.5W 1 Phase (Class II & NEC Class 2) / DRC-5V10W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
More informationVP ELECTRONIQUE MASSY - Tel
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
More informationSeries AME60-MJZ 60 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: I/O Isolation VAC Continuous Short circuit protection Input under-voltage protection Low
More informationSeries AMEL10-MJZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum
More informationUNO-PS/1AC/12DC/30W. Primary-switched power supply unit. Data sheet. 1 Description
Primaryswitched power supply unit Data sheet 105549_en_00 PHOENIX CONTACT 20130405 1 Description The UNO POWER power supply unit impresses in worldwide use thanks to maximum energy efficiency. Low noload
More informationUniversal Power Supplies
, Features Universal input: 90 264 VAC or 120 30 VDC Active power factor correction (>0.95) High efficiency up to 93% Load share function for up to 3 units in parallel Adjustable output voltage EMI/EMC
More informationEnclosed Power Supplies
, 15 150 Watt Features Very compact metal cased power supplies High operating temperature up to 70 C Low no load power consumption
More informationChrome DIN Rail Power Supply 24V 10W 1 Phase (Class II & NEC Class 2) / DRC-24V10W1A
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
More informationChrome DIN Rail Power Supply 24V 10W 1 Phase (Class II & NEC Class 2) / DRC-24V10W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 80.0% @ 115Vac & 230Vac NEC Class 2 / Limited
More informationVEO. V2PF480Y/277VSY01 Art.Nr.: V2PF480Y/277VSY01P Art.Nr.: TECHNICAL DATA
Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Control elements Asymmetry Status
More informationABL4RSM24050 regulated SMPS - 1 or 2 phase V AC - 24 V - 5A
Characteristics regulated SMPS - 1 or 2 phase - 120..230 V AC - 24 V - 5A Complementary Input voltage limits Network frequency Inrush current Main Range of product Product or component type Power supply
More informationPower supply CP-D 12/2.1 Primary switch mode power supply
Data sheet Power supply CP-D 12/2.1 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
More informationUninterruptible power supply - TRIO-UPS/1AC/24DC/
Uninterruptible power supply with integrated power supply unit, 5A, in combination with MINI-BAT/24/DC/.3 AH, QUINT-BAT/24DC 3,4AH, 7,2AH or 2 AH Key commercial data Packing unit PCE GTIN Custom tariff
More informationRhino Redundancy Module PSM24-REM360S. Operating Instructions
Rhino Redundancy Module PSM4-REM360S Operating Instructions RHINO REDUNDANCY MODULE PSM4-REM360S Description With this module and two power supplies of the PSM series (78, 90, 56, 80 and 360 watt models),
More informationETD-BL-1T-230(-PT) Multifunctional time relay with various functions and adjustable times. Data sheet. 1 Description
(-PT) Multifunctional time relay with various functions and adjustable times Data sheet 106395_en_02 PHOENIX CONTACT 20-06-08 1 Description Requirements pertaining to safety and system availability increase
More informationTMP & TMPM Series, 4 to 60 Watt. Order code Output power max. Output Efficiency
TMP & TMPM Series, 4 to 60 Watt Features Ultra compact, low profile plastic casing Fully encapsulated (pollution/dust) Single-, dual- and triple output models standard package versions: - Screw terminal
More informationABL8REM24050 regulated SMPS - 1 or 2-phase V AC - 24 V - 5 A
Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 5 A Complementary Input voltage limits Network frequency Inrush current Main Range of product Product or component type Power supply
More informationSITOP modular 1ph/2ph. SITOP power supply. SITOP modular 1ph/2ph. Overview. Safety instructions. Description, device design, dimension drawing 2
Overview Safety instructions 1 SITOP power supply Operating Instructions Description, device design, dimension drawing 2 Mounting/removal 3 Mounting position, mounting clearances 4 Installation 5 Technical
More informationItem No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
More informationSiemens AG 2016 SITOP. Power Supply SITOP. Catalog KT Edition siemens.com/sitop
SITOP Power Supply SITOP Catalog KT 10.1 Edition 2016 siemens.com/sitop Related catalogs Industrial Controls IC 10 SIRIUS Motion Control PM 21 SIMOTION, SINAMICS S120 & SIMOTICS Equipment for Production
More informationModel No. ( Single Output ) ATC-3.3S ATC-5S ATC-12S ATC-15S ATC-24S Max Output Wattage (W) 10W 10W 10W 10W 10W VAC or VDC
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
More informationSPECIFICATION. For SWITCHING POWER SUPPLY M/N: MPD-F113-V
SPECIFICTION For SWITCHING POWER SUPPLY M/N: MPD-F113-V Revision History REV. Oct. 1 st 2012 REV. Dec. 6 th 2012 REV. Jun. 4 th 2013 REV. Nov. 25 th 2015 Established Revised EMS performance and added mechanical
More informationMPO-120S Series. Single Output, 180W Compact, Open Frame AC/DC Power Supplies. Key Features:
MPO-120S Series Single, 180W Compact, Open Frame AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved High Efficiency Five Single Models Meets EN
More informationAC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS MUI65 SERIES
AC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS 2MOPP Medical FEATURES Universal Input Range Operating Temperature Range: -25º to 80ºC (with derating) Compact Package: 2.00 3.00 1.16
More informationRhino PSM Power Supplies. Operating Instructions
Rhino PSM Power Supplies Operating Instructions RHINO Power Supplies PSM Series Description The PSM power supplies are built-in units. The mounting position for PSM power supplies must fulfill the requirements
More informationMPU-120S Series. Single Output, 180W Compact, U-Channel AC/DC Power Supplies. Key Features:
MPU-120S Series Single, 180W Compact, U-Channel AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved Compact U-Channel Five Single Models Meets EN
More informationPower supply CP-C 24/5.0
2CDC 271 064 F0t04 a OUTPUT L+, L : terminals output b INPUT L, N, PE: terminals input c OUTPUT OK: green LED output voltage OK d OUTPUT Adjust: rotary potentiometer adjustment of output voltage e Circuit
More informationABL1REM24025 regulated SMPS - single phase V input - 24 V output - 60 W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 60 W Main Range of product Product or component type Power supply type Rated power in W Input voltage Output voltage Power
More informationAS-i Safety Relay Output Module with Diagnostic Slave, 1 EDM, 1 x 2 channel Safe Input
ext. in ext. in AS-i Safety Relay Output Module with Safety + standard I/O in one module Safety relay output with galvanically isolated contact sets, approved up to 230 V Additionally 1 EDM input, 1 x
More informationABL8MEM12020 regulated SMPS - 1 or 2-phase V AC - 12 V - 2 A
Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC - 12 V - 2 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Input protection
More informationPHOENIX CONTACT Features
Electronic monitoring relay for temperature monitoring Data sheet 107385_en_00 1 Description PHOENIX CONTACT - 2016-05-10 Features Safety and system availability requirements are constantly on the increase
More informationELR H3-IES-PT- 24DC/500AC-...
Hybrid motor starter Data sheet 105518_en_01 PHOENIX CONTACT 2013-12-17 1 Description The 3-phase hybrid motor starter with current monitoring provides the following functions. Right contactor Motor overload
More informationAS-i Safety Relay Output Module with Diagnostic Slave and 1 EDM Input
Safety + standard I/O in one module Safety relay output with galvanically isolated contact sets, approved up to 230 V IEC 61508 SIL 3, EN ISO 13849-1/PLe Kat 4, EN 62061 SIL 3 Protection category IP20
More information20A DRR Module / 40A DRR Module
20A DRR Module / 40A DRR Module Features: Full corrosion resistance aluminium chassis even with deep scratches caused by rugged handling Wide Input & Output Range 22-60Vdc. Built-in 2 Channel DC OK signal
More informationPOWERBOX Industrial Line PMR20W Series 20W 4:1 Single and Dual Output High Performance DC/DC Converter
Features 2250VDC input to output isolation Standard 2.00 x 1.00 x 0.40 inch Six-sided continuous shield UL60950-1, EN60950-1, & IEC60950-1 safety approvals Compliance to EN50155 and en45545-2 railway standard
More informationABL1RPM24100 regulated SMPS - single phase V input - 24 V output W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 240 W Complementary Input voltage limits Network frequency limits Inrush current Main Range of product Product or component
More information